public static void ConfigureAppSettings(IAppSettingsBuilder builder)
{
// UDP configuration settings
builder.Add($"{UDPSection}:{nameof(InterfaceIP)}", DefaultInterfaceIP, "Defines the IP of the network interface to use for the UDP socket. Use 0.0.0.0 to listen on all interfaces with IPv4 or ::0 for all interfaces with IPv6.");
// Serial configuration settings
builder.Add($"{SerialSection}:{nameof(BaudRate)}", DefaultBaudRate.ToString(), "Defines the serial baud rate. Standard values: 110, 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000, or 256000.");
builder.Add($"{SerialSection}:{nameof(DataBits)}", DefaultDataBits.ToString(), "Defines the standard length of data bits per byte. Standard values: 5, 6, 7 or 8.");
builder.Add($"{SerialSection}:{nameof(Parity)}", DefaultParity.ToString(), "Defines the parity-checking protocol. Value is one of: Even, Mark, None, Odd or Space.");
builder.Add($"{SerialSection}:{nameof(StopBits)}", DefaultStopBits.ToString(), "Defines the standard number of stopbits per byte. Value is one of: None, One, OnePointFive or Two.");
builder.Add($"{SerialSection}:{nameof(DtrEnable)}", DefaultDtrEnable.ToString(), "Defines the value that enables the Data Terminal Ready (DTR) signal during serial communication.");
builder.Add($"{SerialSection}:{nameof(RtsEnable)}", DefaultRtsEnable.ToString(), "Defines the value indicating whether the Request to Send (RTS) signal is enabled during serial communication.");
}
public static void ConfigureAppSettings(IAppSettingsBuilder builder)
{
// Root configuration settings
builder.Add($"{nameof(UseReadKey)}", DefaultUseReadKey.ToString(), "Defines the flag that determines if console uses read key to pause application.");
builder.Add($"{nameof(WindowSize)}", DefaultWindowSize.ToString(), "Defines the window size, in milliseconds, overwhich to calculate min, max and avg statistics for HIDS InfluxDB target.");
// InfluxDB configuration settings
builder.Add($"{InfluxDBSection}:{nameof(TokenID)}", DefaultTokenIP, "Defines the InfluxDB token ID needed for server authentication.");
builder.Add($"{InfluxDBSection}:{nameof(PointBucket)}", DefaultPointBucket, "Defines the InfluxDB point bucket.");
builder.Add($"{InfluxDBSection}:{nameof(OrganizationID)}", DefaultOrganizationID, "Defines the InfluxDB organization ID.");
// STTP configuration settings
builder.Add($"{STTPSection}:{nameof(FilterExpression)}", DefaultFilterExpression, "Defines the STTP filter expression for measurement subscription.");
}
public static void ConfigureAppSettings(IAppSettingsBuilder builder)
{
// Main configuration settings
builder.Add($"{MainSection}:{nameof(AutoScan)}", "false", "Defines the value indicating if tool should start scan automatically on start.");
builder.Add($"{MainSection}:{nameof(AutoRemoveIDs)}", "false", "Defines the value indicating if tool should auto-remove ID codes from list as they are completed.");
builder.Add($"{MainSection}:{nameof(StartComPort)}", "0", "Defines the starting COM port number for the scan.");
builder.Add($"{MainSection}:{nameof(EndComPort)}", "0", "Defines the ending COM port number for the scan.");
builder.Add($"{MainSection}:{nameof(ComPorts)}", "", "Defines the comma separated list of serial COM ports to scan (overrides start/end range).");
builder.Add($"{MainSection}:{nameof(StartIDCode)}", "0", "Defines the starting IEEE C37.118 ID code for the scan.");
builder.Add($"{MainSection}:{nameof(EndIDCode)}", "0", "Defines the ending IEEE C37.118 ID code for the scan.");
builder.Add($"{MainSection}:{nameof(IDCodes)}", "", "Defines the comma separated list of IEEE C37.118 ID codes to scan (overrides start/end range).");
builder.Add($"{MainSection}:{nameof(Rescan)}", DefaultRescan.ToString(), "Defines the value indicating whether already configured COM ports should be rescanned.");
builder.Add($"{MainSection}:{nameof(AutoStartParsingSequenceForScan)}", DefaultAutoStartParsingSequenceForScan.ToString(), "Defines the value indicating whether scan should send automatic parsing sequence to start connection.");
builder.Add($"{MainSection}:{nameof(ControllingConnection)}", DefaultControllingConnection.ToString(), "Defines the value indicating whether added device configuration should be set for controlling connection.");
builder.Add($"{MainSection}:{nameof(SourceConfig)}", DefaultSourceConfig, "Defines the source configuration file for host application that contains database connection info.");
builder.Add($"{MainSection}:{nameof(ResponseTimeout)}", DefaultResponseTimeout.ToString(), "Defines the maximum time, in milliseconds, to wait for a serial response.");
builder.Add($"{MainSection}:{nameof(ConfigFrameTimeout)}", DefaultConfigFrameTimeout.ToString(), "Defines the maximum time, in milliseconds, to wait for a configuration frame.");
builder.Add($"{MainSection}:{nameof(DisableDataDelay)}", DefaultDisableDataDelay.ToString(), "Defined the delay time, in milliseconds, to wait after sending the DisableRealTimeData command to a device.");
// Serial configuration settings
builder.Add($"{SerialSection}:{nameof(BaudRate)}", DefaultBaudRate.ToString(), "Defines the serial baud rate. Standard values: 110, 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000, or 256000.");
builder.Add($"{SerialSection}:{nameof(DataBits)}", DefaultDataBits.ToString(), "Defines the standard length of data bits per byte. Standard values: 5, 6, 7 or 8.");
builder.Add($"{SerialSection}:{nameof(Parity)}", DefaultParity.ToString(), "Defines the parity-checking protocol. Value is one of: Even, Mark, None, Odd or Space.");
builder.Add($"{SerialSection}:{nameof(StopBits)}", DefaultStopBits.ToString(), "Defines the standard number of stopbits per byte. Value is one of: None, One, OnePointFive or Two.");
builder.Add($"{SerialSection}:{nameof(DtrEnable)}", DefaultDtrEnable.ToString(), "Defines the value that enables the Data Terminal Ready (DTR) signal during serial communication.");
builder.Add($"{SerialSection}:{nameof(RtsEnable)}", DefaultRtsEnable.ToString(), "Defines the value indicating whether the Request to Send (RTS) signal is enabled during serial communication.");
}