public void USBinit()
{
HIDDevice.interfaceDetails[] devices = HIDDevice.getConnectedDevices();
var buzzersFound = devices.Where((hiddev) => (((hiddev.PID.ToString("X4") == "1000") ||
(hiddev.PID.ToString("X4") == "0002")) &&
(hiddev.VID.ToString("X4") == "054C"))).ToList();
buzzersBuffersLastIn[0] = new byte[6];
buzzersBuffersOut[0] = new byte[8];
buzzersBuffersLastIn[1] = new byte[6];
buzzersBuffersOut[1] = new byte[8];
if (buzzersFound.Count > 0)
{
buzzers[0] = new HIDDevice(buzzersFound[0].devicePath, false);
buzzersBuffersOut[0] = new byte[buzzers[0].productInfo.OUT_reportByteLength];
irqstat[0] = IrqState.check;
Thread readOne = new Thread(this.ReadThread0);
readOne.Start();
if (buzzersFound.Count > 1)
{
buzzers[1] = new HIDDevice(buzzersFound[1].devicePath, false);
buzzersBuffersOut[1] = new byte[buzzers[1].productInfo.OUT_reportByteLength];
irqstat[1] = IrqState.check;
Thread readTwo = new Thread(this.ReadThread1);
readTwo.Start();
}
}
}
// Apologies for the repeated code, however i feel it provides a better demonstration
// of the functionality of this code.
public void useSynchronousOperation()
{
//Get the details of all connected USB HID devices
HIDDevice.interfaceDetails[] devices = HIDDevice.getConnectedDevices();
//Arbitrarily select one of the devices which we found in the previous step
//record the details of this device to be used in the class constructor
int selectedDeviceIndex = 0;
ushort VID = devices[selectedDeviceIndex].VID;
ushort PID = devices[selectedDeviceIndex].PID;
int SN = devices[selectedDeviceIndex].serialNumber;
string devicePath = devices[selectedDeviceIndex].devicePath;
//create a handle to the device by calling the constructor of the HID class
//This can be done using either the VID/PID/Serialnumber, or the device path (string)
//all of these details are available from the HIDDevice.interfaceDetails[] struct array created above
//The "false" boolean in the constructor tells the class we only want synchronous operation
HIDDevice device = new HIDDevice(devicePath, false);
//OR, the normal usage when you know the VID and PID of the device
//HIDDevice device = new HIDDevice(VID, PID, (ushort)SN, false);
//Write some data to the device (the write method throws an exception if the data is longer than the report length
//specified by the device, this length can be found in the HIDDevice.interfaceDetails struct)
byte[] writeData = { 0x00, 0x01, 0x02, 0x03, 0x04 };
device.write(writeData); //Its that easy!!
//Read some data synchronously from the device. This method blocks the calling thread until the data
//is returned. This takes 1-20ms for most HID devices
byte[] readData = device.read(); //again, that easy!
//close the device to release all handles etc
device.close();
}
// Connect the microcontroller
public bool Connect(ushort PID)
{
// Check if the MCU is already connected
if (bMCUConnected)
{
return(true);
}
// Get all the connected devices
HIDDevice.interfaceDetails[] devices = HIDDevice.getConnectedDevices();
// List all available device paths in the listbox
if (devices.Length > 0)
{
for (int i = 0; i < devices.Length; i++)
{
// Search for the needed device
if (devices[i].VID == 0x0483 && devices[i].PID == PID)
{
// MCU found => connect it
device = new HIDDevice(devices[i].VID, devices[i].PID, (ushort)devices[i].serialNumber, false);
}
}
if (device != null)
{
bMCUConnected = true;
}
}
return(bMCUConnected);
}
public bool startAsyncOperation(ushort MyDevVID, ushort MyDevPID)
{
//Get the details of all connected USB HID devices
HIDDevice.interfaceDetails[] devices = HIDDevice.getConnectedDevices();
//Arbitrarily select one of the devices which we found in the previous step
//record the details of this device to be used in the class constructor
int selectedDeviceIndex = -1;
for (int i = 0; i < devices.Length; i++)
{
if ((devices[i].VID == MyDevVID) && (devices[i].PID == MyDevPID))
{
selectedDeviceIndex = i;
}
}
if (selectedDeviceIndex == -1)
{
return(false);
}
ushort VID = devices[selectedDeviceIndex].VID;
ushort PID = devices[selectedDeviceIndex].PID;
int SN = devices[selectedDeviceIndex].serialNumber;
string devicePath = devices[selectedDeviceIndex].devicePath;
//create a handle to the device by calling the constructor of the HID class
//This can be done using either the VID/PID/Serialnumber, or the device path (string)
//all of these details are available from the HIDDevice.interfaceDetails[] struct array created above
//The "true" boolean in the constructor tells the class we want asynchronous operation this time
device = new HIDDevice(devicePath, true);
//OR, the normal usage when you know the VID and PID of the device
//HIDDevice device = new HIDDevice(VID, PID, (ushort)SN, true);
//next create the event handler for the incoming reports
device.dataReceived += new HIDDevice.dataReceivedEvent(device_dataReceived);
//Write some data to the device (the write method throws an exception if the data is longer than the report length
//specified by the device, this length can be found in the HIDDevice.interfaceDetails struct)
//The write method is identical to the synchronous mode of operation
byte[] writeData = new byte[64];
for (int i = 0; i < writeData.Length; i++)
{
writeData[i] = Convert.ToByte(i + 100);
}
device.write(writeData); //Its that easy!!
//Send your program off to do other stuff here, wait for UI events etc
//When a report occurs, the device_dataReceived(byte[] message) method will be called
//System.Threading.Thread.Sleep(100);
//close the device to release all handles etc
//device.close();
return(true);
}
public void find()
{
devices = HIDDevice.getConnectedDevices();
//int selectedDeviceIndex = 0;
/*ushort VID = devices[selectedDeviceIndex].VID;
* ushort PID = devices[selectedDeviceIndex].PID;
* int SN = devices[selectedDeviceIndex].serialNumber;*/
// devicePath = devices[selectedDeviceIndex].devicePath;
//devicePath = null;
for (int i = 0; i <= devices.Length; i++)
{
try
{
if (devices[i].VID == 9025 && devices[i].PID == 32822)
{
devicePath = devices[i].devicePath;
break;
}
}
catch (Exception)
{
}
}
if (devicePath == null)
{
Console.WriteLine("Device not found");
connected = false;
}
//create a handle to the device by calling the constructor of the HID class
//This can be done using either the VID/PID/Serialnumber, or the device path (string)
//all of these details are available from the HIDDevice.interfaceDetails[] struct array created above
//The "true" boolean in the constructor tells the class we want asynchronous operation this time
//device = new HIDDevice(devicePath, true);
//OR, the normal usage when you know the VID and PID of the device
//HIDDevice device = new HIDDevice(VID, PID, (ushort)SN, true);
//next create the event handler for the incoming reports
//device.dataReceived += new HIDDevice.dataReceivedEvent(device_dataReceived);
//Write some data to the device (the write method throws an exception if the data is longer than the report length
//specified by the device, this length can be found in the HIDDevice.interfaceDetails struct)
//The write method is identical to the synchronous mode of operation
//byte[] writeData = { 0x00, 0x01, 0x02, 0x03, 0x04 };
//device.write(writeData); //Its that easy!!
//Send your program off to do other stuff here, wait for UI events etc
//When a report occurs, the device_dataReceived(byte[] message) method will be called
/*while(!receiveData)
* System.Threading.Thread.Sleep(100);*/
//close the device to release all handles etc
//device.close();
}
public bool FindDev()
{
bool result = false;
bool foundtarget = false;
HIDDevice.interfaceDetails[] devices = HIDDevice.getConnectedDevices();
List <HIDDevice.interfaceDetails> KingstonDevs = new List <HIDDevice.interfaceDetails>();
for (int i = 0; i < devices.Length; i++)
{
// Alpha S
if (devices[i].VID == TARGET_VID && devices[i].PID == TARGET_PID) //if (devices[i].VID == KTC_VID && devices[i].PID == ALPHAS_PID)
{
label_vid.Text = devices[i].VID.ToString("X4"); //KTC_VID.ToString("X4");
label_pid.Text = devices[i].PID.ToString("X4"); //DART_PID1.ToString("X4");
//textBox_device.AppendText("\r\nProduct : " + devices[i].product.ToString());
//textBox_device.AppendText("\r\nRevision : " + "0x" + devices[i].versionNumber.ToString("X"));
label_manufacturer.Text = devices[i].manufacturer.ToString();
label_product.Text = devices[i].product.ToString();
label_revision.Text = devices[i].versionNumber.ToString("X");
label_status.Text = "Detected";
CheckDev();
foundtarget = true;
break;
}
if (!foundtarget)
{
empty_fields();
if (button_detect.Text == "STOP")
{
label_status.Text = "Detecting...";
}
if (button_detect.Text == "START")
{
label_status.Text = "";
}
}
foundtarget = false;
}
return(result);
}
public bool disconnectDeviceTryOpenThread()
{
string devicePath = "";
bool exist = false;
// 检查当前设备是否可用
InterfaceDetails[] devices = HIDDevice.getConnectedDevices();
int deviceCount = devices.Length;
if (mCurDeviceCount != deviceCount)
{
mCurDeviceCount = deviceCount;
exist = false;
for (int i = 0; i < deviceCount; ++i)
{
if (devices[i].VID == VID && devices[i].PID == PID)
{
devicePath = devices[i].devicePath;
exist = true;
break;
}
}
if (!exist)
{
closeDevice();
}
}
// 有设备,并且设备数量未变化,则认为有设备连接
else if (deviceCount > 0)
{
exist = true;
}
// 如果发现设备被关闭,并且设备存在,则一直尝试打开设备
if (!isDeviceConnect() && exist)
{
openDevice(devicePath);
}
// 暂时不实现热插拔
if (isDeviceConnect())
{
return(false);
}
return(true);
}
/// <summary>
/// Возвращает устройство для работы с кроватью (пути к нему для дальнейшей работы с ним)
/// </summary>
private static HIDDevice GetBedUsbDevice()
{
try
{
var devices = HIDDevice.getConnectedDevices();
string devicePath = null;
foreach (var listofDevice in devices)
{
if (listofDevice.product == "belmed_v1") //итоговое название всех прошивок - другое
{
devicePath = listofDevice.devicePath;
break;
}
}
var device = devicePath != null ? new HIDDevice(devicePath, false) : null;
return(device);
}
catch (Exception)
{
return(null);
}
}
static void Main()
{
Console.Clear();
Console.Title = Name + " [" + Version + "]";
// Create a joystick object
Gamepad = new vJoy();
iReport = new vJoy.JoystickState();
// Get list of all connected HID devices
HIDDevice.interfaceDetails[] Devices = HIDDevice.getConnectedDevices();
// Count HID Devices
int ConnectedDevices = 0;
// Print devices list
Console.Write("Select DJHero USB Dongle\n-----------------------");
foreach (HIDDevice.interfaceDetails Dev in Devices)
{
ConnectedDevices++;
Console.Write("\n{0}.{1} (VID:{2} PID:{3})", ConnectedDevices, Dev.product, Dev.VID.ToString("X"), Dev.PID.ToString("X"));
}
Console.Write("\n-----------------------\n");
/* Wait for user selection */
Console.Write("Selection: ");
// Parse user input
if (!int.TryParse(Console.ReadLine(), out int devnum))
{
Console.Clear();
Console.Write("Invalid input data!");
Thread.Sleep(1000);
Program.Main();
}
else
{
devnum -= 1;
}
// Check if user selected listed device
if (devnum > ConnectedDevices - 1 | devnum < 0)
{
Console.Clear();
Console.Write("Selected invalid value! (out of range)");
Thread.Sleep(1000);
Program.Main();
}
else
{
Console.Clear();
Console.Write("Selected: {0}", Devices[devnum].product);
// Check vJoy status
switch (Gamepad.GetVJDStatus(1))
{
case VjdStat.VJD_STAT_MISS:
Console.Write("\n vJoy is not installed or enabled!");
Thread.Sleep(1000);
Program.Main();
break;
case VjdStat.VJD_STAT_BUSY:
Console.Write("\n vJoy device {0} is already owned by another feeder", 1);
Thread.Sleep(1000);
Program.Main();
break;
case VjdStat.VJD_STAT_FREE:
Console.Write("\n vJoy device 1 is free");
// Acquire device
Gamepad.AcquireVJD(1);
Gamepad.ResetVJD(1);
Thread.Sleep(1000);
Console.Clear();
// Start reading DJH Bytes
ReadDJHDevice(Devices[devnum].devicePath);
break;
}
}
Thread.Sleep(-1);
}
