Operation IParser.Parse(string[] lines)
{
var operation = new Operation();
var operationResource = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
InnerSection innerSection = InnerSection.AStraße;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
if (!StartsWithKeyword(line, out var keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "EINSATZNUMMER":
operation.OperationNumber = ParserUtility.GetTextBetween(msg, null, "ALARMZEIT");
operation.Timestamp = ReadFaxTimestamp(ParserUtility.GetTextBetween(msg, "ALARMZEIT", null), DateTime.Now);
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
ParserUtility.AnalyzeStreetLine(msg, out var street, out var streetNumber, out var appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ABSCHNITT":
break;
case "ORT":
{
innerSection = InnerSection.BOrt;
operation.Einsatzort.ZipCode = ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ", StringComparison.Ordinal);
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
innerSection = InnerSection.CObjekt;
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "STATION":
operation.CustomData.Add("Einsatzort Station:", msg);
break;
case "KOORDINATE":
Regex r = new Regex(@"\d+");
var matches = r.Matches(line);
if (matches.Count == 2)
{
int geoRechts = Convert.ToInt32(matches[0].Value);
int geoHoch = Convert.ToInt32(matches[1].Value);
var geo = GeographicCoords.FromGaussKrueger(geoRechts, geoHoch);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Einsatzort.Street += msg;
break;
case InnerSection.BOrt:
operation.Einsatzort.City += msg;
break;
case InnerSection.CObjekt:
operation.Einsatzort.Property += msg;
break;
}
break;
}
}
break;
case CurrentSection.DEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT B":
operation.Keywords.B = ParserUtility.GetTextBetween(msg, null, "STICHWORT RD:");
operation.Keywords.R = ParserUtility.GetTextBetween(msg, "STICHWORT RD:", null);
break;
case "STICHWORT SO":
operation.Keywords.S = ParserUtility.GetTextBetween(msg, null, "STICHWORT TH:");
operation.Keywords.T = ParserUtility.GetTextBetween(msg, "STICHWORT TH:", "STICHWORT IN:");
operation.CustomData.Add("Stichwort IN:", ParserUtility.GetTextBetween(msg, "STICHWORT IN:", null));
break;
case "PRIO.":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.EEinsatzmittel:
{
switch (prefix)
{
case "EINSATZMITTELNAME":
operationResource.FullName = msg.Trim();
break;
case "GEF. GERÄTE":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
operationResource.RequestedEquipment.Add(msg);
}
operation.Resources.Add(operationResource);
operationResource = new OperationResource();
break;
}
}
break;
case CurrentSection.FBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.GFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
CurrentSection section = CurrentSection.Anfang;
lines = Utilities.Trim(lines);
string streetData = string.Empty;
string sectionData = string.Empty;
foreach (var line in lines)
{
string keyword;
if (ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
switch (keyword.Trim())
{
case "E-Nr": { section = CurrentSection.ENr; break; }
case "EINSATZORT": { section = CurrentSection.Einsatzort; break; }
case "STRAßE": { section = CurrentSection.Straße; break; }
case "ABSCHNITT": { section = CurrentSection.Abschnitt; break; }
case "KOORDINATEN": { section = CurrentSection.Koordinaten; break; }
case "ORTSTEIL/ORT":
case "ORTSTEIL / ORT": { section = CurrentSection.Ort; break; }
case "OBJEKT": { section = CurrentSection.Objekt; break; }
case "EINSATZPLAN": { section = CurrentSection.Einsatzplan; break; }
case "MELDEBILD": { section = CurrentSection.Meldebild; break; }
case "EINSATZSTICHWORT": { section = CurrentSection.Einsatzstichwort; break; }
case "HINWEIS": { section = CurrentSection.Hinweis; break; }
case "EINSATZMITTEL": { section = CurrentSection.Einsatzmittel; break; }
case "(ALARMSCHREIBEN ENDE)":
{
section = CurrentSection.Ende; break;
}
}
}
switch (section)
{
case CurrentSection.ENr:
string opnummer = ParserUtility.GetTextBetween(line, null, "ALARM");
string optime = ParserUtility.GetTextBetween(line, "ALARM");
operation.OperationNumber = ParserUtility.GetMessageText(opnummer, keyword);
operation.Timestamp = ParserUtility.ReadFaxTimestamp(optime, DateTime.Now);
break;
case CurrentSection.Einsatzort:
operation.Zielort.Location = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.Straße:
string msg = ParserUtility.GetMessageText(line, keyword);
streetData += msg;
break;
case CurrentSection.Abschnitt:
sectionData += ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.Ort:
operation.Einsatzort.City = ParserUtility.GetMessageText(line, keyword);
if (operation.Einsatzort.City.Contains(" - "))
{
int i = operation.Einsatzort.City.IndexOf(" - ");
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, i).Trim();
}
break;
case CurrentSection.Objekt:
operation.Einsatzort.Property += ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.Einsatzplan:
operation.OperationPlan = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.Meldebild:
operation.Picture = operation.Picture.AppendLine(ParserUtility.GetMessageText(line, keyword));
break;
case CurrentSection.Einsatzstichwort:
operation.Keywords.EmergencyKeyword = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.Hinweis:
operation.Comment = operation.Comment.AppendLine(ParserUtility.GetMessageText(line, keyword));
break;
case CurrentSection.Einsatzmittel:
if (line.Equals("EINSATZMITTEL: ", StringComparison.InvariantCultureIgnoreCase))
{
break;
}
OperationResource resource = new OperationResource();
if (line.Contains('('))
{
string tool = line.Substring(line.IndexOf("(", StringComparison.Ordinal) + 1);
tool = tool.Length >= 2 ? tool.Substring(0, tool.Length - 2).Trim() : String.Empty;
string unit = line.Substring(0, line.IndexOf("(", StringComparison.Ordinal));
resource.FullName = unit;
resource.RequestedEquipment.Add(tool);
operation.Resources.Add(resource);
}
break;
case CurrentSection.Koordinaten:
string coords = ParserUtility.GetMessageText(line, keyword);
if (string.IsNullOrWhiteSpace(coords))
{
break;
}
double east = double.Parse(coords.Split('/')[0], CultureInfo.InvariantCulture);
double north = double.Parse(coords.Split('/')[1], CultureInfo.InvariantCulture);
var geo = GeographicCoords.FromGaussKrueger(east, north);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
break;
case CurrentSection.Ende:
break;
}
}
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(streetData.Replace("1.2", ""), out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street.Trim();
operation.Einsatzort.StreetNumber = streetNumber;
operation.Einsatzort.Intersection = sectionData;
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
double geoX = 0, geoY = 0;
NumberFormatInfo nfi = new NumberFormatInfo {
NumberDecimalSeparator = "."
};
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
string keyword = "";
if (keywordsOnly)
{
if (!ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "EINSATZNUMMER":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.CKoordinaten:
switch (prefix)
{
case "X":
geoX = double.Parse(msg, nfi);
break;
case "Y":
geoY = double.Parse(msg, nfi);
var geo = GeographicCoords.FromGaussKrueger(geoX, geoY);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
break;
}
break;
case CurrentSection.BMitteiler:
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
case "RUFNUMMER":
operation.Messenger = operation.Messenger.AppendLine(string.Format("Nr.: {0}", msg));
break;
}
break;
case CurrentSection.DEinsatzort:
{
switch (prefix)
{
case "STRAßE":
operation.Einsatzort.Street = msg;
break;
case "HAUS-NR.":
operation.Einsatzort.StreetNumber = msg;
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (!string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
operation.Einsatzort.City = msg.Replace(operation.Einsatzort.ZipCode, "").Trim();
}
else
{
operation.Einsatzort.City = msg;
}
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf('-');
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
}
}
break;
case CurrentSection.EZielort:
{
switch (prefix)
{
case "STRAßE":
operation.Zielort.Street = msg;
break;
case "HAUS-NR.":
operation.Zielort.StreetNumber = msg;
break;
case "ORT":
operation.Zielort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (!string.IsNullOrWhiteSpace(operation.Zielort.ZipCode))
{
operation.Zielort.City = msg.Replace(operation.Zielort.ZipCode, "").Trim();
}
else
{
operation.Zielort.City = msg;
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
}
}
break;
case CurrentSection.FEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT":
operation.Keywords.EmergencyKeyword = msg;
break;
}
}
break;
case CurrentSection.HEinsatzmittel:
{
switch (prefix)
{
case "NAME":
last.FullName = msg;
break;
case "GERÄT":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
break;
case "ALARMIERT":
last.Timestamp = ParserUtility.TryGetTimestampFromMessage(msg, DateTime.Now).ToString();
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.GBemerkungen:
{
operation.Picture = operation.Picture.AppendLine(msg);
}
break;
case CurrentSection.ZFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!StartsWithKeyword(line, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg.Substring(0, msg.IndexOf("ALARMZEIT", StringComparison.InvariantCultureIgnoreCase));
String dateString = msg.Substring(msg.IndexOf("ALARMZEIT", StringComparison.InvariantCultureIgnoreCase)).Trim().Remove(0, "ALARMZEIT".Length + 1).Trim();
DateTime time = DateTime.Now;
DateTime.TryParse(dateString, out time);
operation.Timestamp = time;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZNUMMER":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "ABSCHNITT":
case "KREUZUNG":
operation.Einsatzort.Intersection += msg;
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
case "KOORDINATE":
Regex r = new Regex(@"[\d\.]+");
var matches = r.Matches(line);
if (matches.Count == 2)
{
int geoRechts = Convert.ToInt32(matches[0].Value);
int geoHoch = Convert.ToInt32(matches[1].Value);
var geo = GeographicCoords.FromGaussKrueger(geoRechts, geoHoch);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
case "ABTEILUNG":
case "ZUSTÄNDIGE ILS":
//These fields are currently unassigned. If required this can be done.
break;
}
}
break;
case CurrentSection.DZielort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
string plz = ParserUtility.ReadZipCodeFromCity(msg);
operation.Zielort.ZipCode = plz;
operation.Zielort.City = msg.Remove(0, plz.Length).Trim();
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGWORT":
operation.Keywords.Keyword = msg.Substring(0, msg.IndexOf("STICHWORT", StringComparison.InvariantCultureIgnoreCase));
operation.Keywords.EmergencyKeyword = msg.Substring(msg.IndexOf("STICHWORT", StringComparison.InvariantCultureIgnoreCase)).Trim().Remove(0, "STICHWORT".Length + 1).Trim();
break;
case "PRIO.":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
if (line.StartsWith("NAME", StringComparison.CurrentCultureIgnoreCase))
{
//Thats the line "Name : Alarmiert : Aus : AN". Should be ignored.
}
else
{
operation.Resources.Add(new OperationResource {
FullName = msg.Replace(':', ' ').Trim()
});
}
}
break;
case CurrentSection.Objektinfo:
operation.CustomData["Objektinfo"] += line;
break;
case CurrentSection.GBemerkung:
{
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
InnerSection innerSection = InnerSection.AStraße;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
//TODO: Absender unterbringen
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
innerSection = InnerSection.BOrt;
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
innerSection = InnerSection.CObjekt;
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "KOORDINATE":
Regex r = new Regex(@"(\d+\.\d+)");
var matches = r.Matches(line);
if (matches.Count == 2)
{
NumberFormatInfo nfi = new NumberFormatInfo {
NumberDecimalSeparator = "."
};
double geoRechts = Convert.ToDouble(matches[0].Value, nfi);
double geoHoch = Convert.ToDouble(matches[1].Value, nfi);
var geo = GeographicCoords.FromGaussKrueger(geoRechts, geoHoch);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Einsatzort.Street += msg;
break;
case InnerSection.BOrt:
operation.Einsatzort.City += msg;
break;
case InnerSection.CObjekt:
operation.Einsatzort.Property += msg;
break;
}
break;
}
}
break;
case CurrentSection.DZielort:
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
innerSection = InnerSection.BOrt;
operation.Zielort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Zielort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Zielort.City);
}
operation.Zielort.City = msg.Remove(0, operation.Zielort.ZipCode.Length).Trim();
}
break;
case "OBJEKT":
innerSection = InnerSection.CObjekt;
operation.Zielort.Property = msg;
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Einsatzort.Street += msg;
break;
case InnerSection.BOrt:
operation.Einsatzort.City += msg;
break;
case InnerSection.CObjekt:
operation.Einsatzort.Property += msg;
break;
}
break;
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT":
operation.Keywords.EmergencyKeyword = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
operation.Resources.Add(new OperationResource {
FullName = msg.Substring(0, msg.LastIndexOf('('))
});
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
if (section == CurrentSection.CEinsatzort)
{
Regex r = new Regex(@"\d+");
var matches = r.Matches(line);
if (matches.Count == 2)
{
int geoRechts = Convert.ToInt32(matches[0].Value);
int geoHoch = Convert.ToInt32(matches[1].Value);
var geo = GeographicCoords.FromGaussKrueger(geoRechts, geoHoch);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
}
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
string keyword = "";
if (keywordsOnly)
{
if (!ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "EINSATZ-NR.":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
operation.Messenger = msg;
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "GEMEINDE":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
}
}
break;
case CurrentSection.DEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT":
operation.Keywords.EmergencyKeyword = msg;
break;
case "PRIORITÄT":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.EEinsatzmittel:
{
switch (prefix)
{
case "NAME":
last.FullName = msg;
break;
case "ALARMIERT":
msg = ParserUtility.GetTextBetween(msg, null, "AUS");
last.Timestamp = ParserUtility.TryGetTimestampFromMessage(msg, DateTime.Now).ToString();
break;
case "GEF. GERÄT":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.FBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Picture += msg + Environment.NewLine;
}
break;
case CurrentSection.GHinweis:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
int rechts = 0, hoch = 0;
bool keywordsOnly = true;
CurrentSection section = CurrentSection.AHeader;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZNUMMER":
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (msg.ToUpperInvariant().Contains("ALARMZEIT"))
{
msg = msg.Substring(0, msg.ToUpperInvariant().IndexOf("ALARMZEIT")).Trim();
}
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ABSCHNITT":
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT B":
operation.Keywords.B = ParserUtility.GetTextBetween(msg, null, "STICHWORT RD:");
operation.Keywords.R = ParserUtility.GetTextBetween(msg, "STICHWORT RD:", "STICHWORT ABC:");
operation.CustomData["Stichwort ABC"] = ParserUtility.GetTextBetween(msg, "STICHWORT ABC:");
break;
case "STICHWORT SO":
operation.Keywords.S = ParserUtility.GetTextBetween(msg, null, "STICHWORT TH:");
operation.Keywords.T = ParserUtility.GetTextBetween(msg, "STICHWORT TH:", "STICHWORT IN:");
operation.CustomData["Stichwort IN"] = ParserUtility.GetTextBetween(msg, "STICHWORT IN:");
break;
case "PRIO.":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
switch (prefix)
{
case "EINSATZMITTELNAME":
last.FullName = msg.Trim();
break;
case "GEF. GERÄTE":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
// This line will end the construction of this resource. Add it to the list and go to the next.
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HKoordinaten:
{
switch (prefix)
{
case "RECHTSWERT":
rechts = int.Parse(msg);
break;
case "HOCHWERT":
hoch = int.Parse(msg);
break;
}
}
break;
case CurrentSection.IFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
var geo = GeographicCoords.FromGaussKrueger(rechts, hoch);;
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
lines = Utilities.Trim(lines);
OperationResource last = new OperationResource();
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
InnerSection innerSection = InnerSection.AStraße;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZNUMMER":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
innerSection = InnerSection.BOrt;
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
innerSection = InnerSection.CObjekt;
operation.Einsatzort.Property = msg;
break;
case "STATION":
innerSection = InnerSection.DStation;
operation.CustomData["Einsatzort Station"] = msg;
break;
case "KOORDINATEN":
Match result = r.Match(msg);
if (result.Success)
{
double geoX = 0, geoY = 0;
geoX = double.Parse(result.Groups[1].Value, CultureInfo.InvariantCulture);
geoY = double.Parse(result.Groups[2].Value, CultureInfo.InvariantCulture);
var geo = GeographicCoords.FromGaussKrueger(geoX, geoY);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Einsatzort.Street += msg;
break;
case InnerSection.BOrt:
operation.Einsatzort.City += msg;
break;
case InnerSection.CObjekt:
operation.Einsatzort.Property += msg;
break;
case InnerSection.DStation:
operation.CustomData["Einsatzort Station"] += msg;
break;
}
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT B":
operation.Keywords.B = msg;
break;
case "STICHWORT T":
operation.Keywords.T = msg;
break;
case "STICHWORT S":
operation.Keywords.S = msg;
break;
case "STICHWORT R":
operation.Keywords.R = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
switch (prefix)
{
case "NAME": last.FullName = msg.Trim();
break;
case "GEF. GERÄT":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
break;
case "ALARMIERT":
last.Timestamp = ParserUtility.TryGetTimestampFromMessage(msg, DateTime.Now).ToString();
// This line will end the construction of this resource. Add it to the list and go to the next.
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
NumberFormatInfo nfi = new NumberFormatInfo {
NumberDecimalSeparator = "."
};
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "EINSATZNUMMER":
operation.OperationNumber = ParserUtility.GetTextBetween(msg, null, "Alarmzeit:");
string timestamp = ParserUtility.GetTextBetween(msg, "Alarmzeit:");
operation.Timestamp = ParserUtility.ReadFaxTimestamp(timestamp, DateTime.Now);
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
case "TELEFON":
operation.Messenger = string.Format("{0} Telefon: {1}", operation.Messenger, msg);
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ABSCHNITT":
operation.CustomData["Einsatzort Abschnitt"] = msg;
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = ParserUtility.GetTextBetween(msg, null, "Objektnummer");
operation.OperationPlan = ParserUtility.GetMessageText(ParserUtility.GetTextBetween(msg, "Objektnummer"), "");
break;
case "Einsatzort Position X":
geoX = double.Parse(msg, nfi);
break;
case "Einsatzort Position Y":
geoY = double.Parse(msg, nfi);
var geo = GeographicCoords.FromGaussKrueger(geoX, geoY);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
break;
}
}
break;
case CurrentSection.DEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGWORT.":
operation.Keywords.Keyword = msg;
break;
case "- BRAND":
operation.Keywords.B = msg;
break;
case "- RETTUNGSDIENST":
operation.Keywords.R = msg;
break;
case "- SONSTIGES":
operation.Keywords.S = msg;
break;
case "- THL":
operation.Keywords.T = msg;
break;
case "- INFO":
operation.CustomData["Stichwort I"] = msg;
break;
}
}
break;
case CurrentSection.EEinsatzmittel:
{
switch (prefix)
{
case "EINSATZMITTELNAME":
last.FullName = msg;
break;
case "GEF. GERÄTE":
last.RequestedEquipment.Add(msg);
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.FBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.GFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
CurrentSection section = CurrentSection.AAnfang;
lines = Utilities.Trim(lines);
foreach (var line in lines)
{
string keyword;
if (ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
switch (keyword.Trim())
{
case "EINSATZNR": { section = CurrentSection.BeNr; break; }
case "MITTEILER": { section = CurrentSection.CMitteiler; break; }
case "EINSATZORT": { section = CurrentSection.DEinsatzort; break; }
case "STRAßE": { section = CurrentSection.EStraße; break; }
case "KOORDINATEN": { section = CurrentSection.Koordinaten; break; }
case "ABSCHNITT": { section = CurrentSection.FAbschnitt; break; }
case "KREUZUNG": { section = CurrentSection.GKreuzung; break; }
case "ORTSTEIL/ORT": { section = CurrentSection.HOrt; break; }
case "OBJEKT": { section = CurrentSection.JObjekt; break; }
case "EINSATZPLAN": { section = CurrentSection.KEinsatzplan; break; }
case "MELDEBILD": { section = CurrentSection.LMeldebild; break; }
case "HINWEIS": { section = CurrentSection.MHinweis; break; }
case "GEFORDERTE EINSATZMITTEL": { section = CurrentSection.NEinsatzmittel; break; }
case "(ALARMSCHREIBEN ENDE)": { section = CurrentSection.OEnde; break; }
}
}
switch (section)
{
case CurrentSection.BeNr:
int indexOf = line.IndexOf("ALARM", StringComparison.InvariantCultureIgnoreCase);
if (indexOf == -1)
{
operation.OperationNumber = ParserUtility.GetMessageText(line, keyword);
break;
}
operation.OperationNumber = ParserUtility.GetMessageText(line.Substring(0, indexOf), keyword);
keyword = "ALARM";
try
{
operation.Timestamp = DateTime.Parse(ParserUtility.GetMessageText(line.Substring(indexOf), keyword));
}
catch (FormatException)
{
operation.Timestamp = DateTime.Now;
}
break;
case CurrentSection.CMitteiler:
operation.Messenger = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.DEinsatzort:
operation.Einsatzort.Location = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.EStraße:
string msg = ParserUtility.GetMessageText(line, keyword);
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
break;
case CurrentSection.FAbschnitt:
operation.CustomData["Einsatzort Abschnitt"] = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.GKreuzung:
operation.Einsatzort.Intersection = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.HOrt:
operation.Einsatzort.City = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.JObjekt:
operation.Einsatzort.Property = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.KEinsatzplan:
operation.OperationPlan = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.LMeldebild:
operation.Picture = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.MHinweis:
operation.Comment = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.NEinsatzmittel:
if (line.StartsWith("Geforderte Einsatzmittel", StringComparison.InvariantCultureIgnoreCase))
{
break;
}
OperationResource resource = new OperationResource();
if (line.Contains('('))
{
string tool = line.Substring(line.IndexOf("(", StringComparison.Ordinal) + 1);
tool = tool.Length >= 2 ? tool.Substring(0, tool.Length - 2).Trim() : String.Empty;
string unit = line.Substring(0, line.IndexOf("(", StringComparison.Ordinal));
resource.FullName = unit;
resource.RequestedEquipment.Add(tool);
operation.Resources.Add(resource);
}
else
{
operation.Resources.Add(new OperationResource()
{
FullName = line
});
}
break;
case CurrentSection.Koordinaten:
string coords = ParserUtility.GetMessageText(line, keyword).Replace("GK4", "").Replace(",", ".");
Regex r = new Regex(@"[\d.]+");
var matches = r.Matches(coords);
if (matches.Count == 2)
{
var geo = GeographicCoords.FromGaussKrueger(Convert.ToDouble(matches[0].Value), Convert.ToDouble(matches[1].Value));
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
case CurrentSection.OEnde:
break;
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
string keyword = "";
if (keywordsOnly)
{
if (!ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.OperationNumber = ParserUtility.GetTextBetween(msg, "Einsatznummer:");
break;
}
}
break;
case CurrentSection.BEinsatzort:
{
switch (prefix)
{
case "STRASSE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
string zipCode = ParserUtility.ReadZipCodeFromCity(msg);
operation.Einsatzort.ZipCode = zipCode;
operation.Einsatzort.City = msg.Replace(zipCode, "").Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "PLANUMER":
operation.OperationPlan = msg;
break;
case "KOORDINATE":
Regex r = new Regex(@"(\d+\.\d+)");
var matches = r.Matches(line);
if (matches.Count == 2)
{
NumberFormatInfo nfi = new NumberFormatInfo {
NumberDecimalSeparator = "."
};
double geoRechts = Convert.ToDouble(matches[0].Value, nfi);
double geoHoch = Convert.ToDouble(matches[1].Value, nfi);
var geo = GeographicCoords.FromGaussKrueger(geoRechts, geoHoch);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
}
}
break;
case CurrentSection.CEreignis:
{
switch (prefix)
{
case "SCHLAGWORT":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT":
operation.Keywords.EmergencyKeyword = msg;
break;
case "PRIORITAT":
case "PRIORITÄT":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.DZielort:
switch (prefix)
{
case "STRASSE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = msg.IndexOf('-');
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Zielort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
}
break;
case CurrentSection.FEinsatzmittel:
{
string name, equip;
name = ParserUtility.GetTextBetween(msg, null, ">> gefordert:");
equip = ParserUtility.GetTextBetween(msg, ">> gefordert:");
OperationResource resource = new OperationResource
{
FullName = name,
RequestedEquipment = new List <string>()
{
equip
}
};
operation.Resources.Add(resource);
}
break;
case CurrentSection.EBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Picture = operation.Picture.AppendLine(msg);
}
break;
case CurrentSection.GFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
string l = lines[i];
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}