private void setupCameraControlSystem()
{
// Ogre::camera points to -Z by default
// Create the camera system using the previously created ogre camera.
mCameraCS = new CameraControlSystem(sceneMgr, "CameraControlSystem", camera);
// -------------------------------------------------------------------------------------
// Register a "Fixed" camera mode. In this mode the camera position and orientation
// never change.
FixedCameraMode camMode1;
camMode1 = new FixedCameraMode(mCameraCS, Vector3.UNIT_Y);
//mCameraCS->registerCameraMode("Fixed (2)",camMode1);
mCameraCS.RegisterCameraMode("Fixed", camMode1);
cameraModeNames.Add("Fixed");
camMode1.CameraPosition = new Vector3(-500, 0, -500);
float roll = 0; float yaw = 225; float pitch = 10;
camMode1.CameraOrientation = new Quaternion(new Radian(new Degree(roll)), Vector3.UNIT_Z)
* new Quaternion(new Radian(new Degree(yaw)), Vector3.UNIT_Y)
* new Quaternion(new Radian(new Degree(pitch)), Vector3.UNIT_X);
// -------------------------------------------------------------------------------------
// Register a "FixedTracking" camera mode. In this mode the camera position is fixed
// and the camera always points to the target.
FixedTrackingCameraMode camMode2;
camMode2 = new FixedTrackingCameraMode(mCameraCS, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("FixedTracking", camMode2);
cameraModeNames.Add("FixedTracking");
camMode2.CameraPosition = new Vector3(500, 0, -100);
// -------------------------------------------------------------------------------------
// Register a "Chase" camera mode with default tightness (0.01). In
// this mode the camera follows the target. The second parameter is the relative position
// to the target. The orientation of the camera is fixed by a yaw axis (UNIT_Y by default).
ChaseCameraMode camMode3;
camMode3 = new ChaseCameraMode(mCameraCS, new Vector3(0, 0, -200), Vector3.UNIT_Y);
//mCameraCS.registerCameraMode("Chase(0.01 tightness)",camMode3);
mCameraCS.RegisterCameraMode("Chase", camMode3);
cameraModeNames.Add("Chase");
// -------------------------------------------------------------------------------------
// Register a "ChaseFreeYawAxis" camera mode with max tightness. This mode is
// similar to "Chase" camera mode but the camera orientation is not fixed by
// a yaw axis. The camera orientation will be the same as the target.
camMode3 = new ChaseFreeYawAxisCameraMode(mCameraCS, new Vector3(0, 0, -200)
, new Radian(0), new Radian(new Degree(180)), new Radian(0));
mCameraCS.RegisterCameraMode("ChaseFreeYawAxis", camMode3);
cameraModeNames.Add("ChaseFreeYawAxis");
camMode3.CameraTightness = 0.05f;
// -------------------------------------------------------------------------------------
// Register a "FirstPerson" camera mode.
//FirstPersonCameraMode* camMode4 = new FirstPersonCameraMode(mCameraCS,Vector3(0,17,-16)
FirstPersonCameraMode camMode4 = new FirstPersonCameraMode(mCameraCS, new Vector3(0, 6, -20)
, new Radian(0), new Radian(new Degree(180)), new Radian(0));
mCameraCS.RegisterCameraMode("FirstPerson", camMode4);
cameraModeNames.Add("FirstPerson");
camMode4.IsCharacterVisible = false;
// -------------------------------------------------------------------------------------
// Register a "PlaneBinded" camera mode. In this mode the camera is constrained to the
// limits of a plane. The camera always points to the target, perpendicularly to the plane.
Plane mPlane = new Plane(Vector3.UNIT_Z, new Vector3(0, 0, -200));
PlaneBindedCameraMode camMode5 = new PlaneBindedCameraMode(mCameraCS, mPlane, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("PlaneBinded (XY)", camMode5);
cameraModeNames.Add("PlaneBinded (XY)");
// -------------------------------------------------------------------------------------
// Register another "PlaneBinded" camera mode using a top point of view.
// mPlane = new Plane(Vector3.UNIT_Y, new Vector3(0, 1000, 0));
// camMode5 = new PlaneBindedCameraMode(mCameraCS, mPlane, Vector3.UNIT_Z);
// mCameraCS.registerCameraMode("PlaneBinded (XZ)", camMode5);
// cameraModeNames.Add("PlaneBinded (XZ)");
// -------------------------------------------------------------------------------------
// Register a "ThroughTarget" camera mode. In this mode the camera points to a given
// position (the "focus") throuh the target. The camera orientation is fixed by a yaw axis.
ThroughTargetCameraMode camMode6 = new ThroughTargetCameraMode(mCameraCS, 400, Vector3.ZERO, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("ThroughTarget", camMode6);
cameraModeNames.Add("ThroughTarget");
//camMode6.CameraFocusPosition=atheneNode._getDerivedPosition() - Vector3(0,100,0);
camMode6.CameraFocusPosition = atheneNode._getDerivedPosition() + new Vector3(0, 100, 0);
// -------------------------------------------------------------------------------------
// Register a "ClosestToTarget" camera mode. In this camera mode the position of the
// camera is chosen to be the closest to the target of a given list. The camera
// orientation is fixed by a yaw axis.
ClosestToTargetCameraMode camMode7 = new ClosestToTargetCameraMode(mCameraCS, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("ClosestToTarget", camMode7);
cameraModeNames.Add("ClosestToTarget");
Vector3 camPos1 = new Vector3(-400, 0, -400);
Vector3 camPos2 = new Vector3(-400, 0, 1400);
Vector3 camPos3 = new Vector3(1400, 0, 1400);
camMode7.AddCameraPosition(camPos1);
camMode7.AddCameraPosition(camPos2);
camMode7.AddCameraPosition(camPos3);
// -------------------------------------------------------------------------------------
// Register an "Attached" camera mode. In this mode the camera node is attached to the
// target node as a child.
AttachedCameraMode camMode8 = new AttachedCameraMode(mCameraCS, new Vector3(200, 0, 0)
, new Radian(0), new Radian(new Degree(90)), new Radian(0));
//mCameraCS.registerCameraMode("Attached (lateral)",camMode8);
mCameraCS.RegisterCameraMode("Attached", camMode8);
cameraModeNames.Add("Attached");
// -------------------------------------------------------------------------------------
// Register a "Free" camera mode. In this mode the camera is controlled by the user.
// The camera orientation is fixed to a yaw axis.
yaw = 225; pitch = -10;
FreeCameraMode camMode9 = new FreeCameraMode(mCameraCS, Vector3.ZERO, new Degree(yaw), new Degree(pitch)
, SwitchingMode.CurrentState);
mCameraCS.RegisterCameraMode("Free", camMode9);
cameraModeNames.Add("Free");
camMode9.MoveFactor = 30;
// -------------------------------------------------------------------------------------
// Register a "FixedDirection" camera mode. In this mode the
// target is always seen from the same point of view.
FixedDirectionCameraMode camMode10 = new FixedDirectionCameraMode(mCameraCS, new Vector3(-1, -1, -1), 1000, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("Fixed direction", camMode10);
cameraModeNames.Add("Fixed direction");
camMode10.CameraTightness = 0.01f;
// -------------------------------------------------------------------------------------
// Register an "Orbital" camera mode. This is basically an attached camera mode where the user
// can mofify the camera position. If the scene focus is seen as the center of a sphere, the camera rotates arount it.
// The last parameter indicates if the camera should be reset to its initial position when this mode is selected.
OrbitalCameraMode camMode12 = new OrbitalCameraMode(mCameraCS, new Radian(0), new Radian(0), 200, false);
mCameraCS.RegisterCameraMode("Orbital", camMode12);
cameraModeNames.Add("Orbital");
camMode12.ZoomFactor = 100;
camMode12.RotationFactor = 50;
//camMode12.CollisionsEnabled = true;
//camMode12.collisionDelegate = camMode12.DefaultCollisionDetectionFunction;
// ** Uncomment for custom collisions calculation. By default the collisions are based on ogre basic raycast feature **
//camMode12.collisionDelegate = CollidableCamera::newCollisionDelegate(this
// , &CameraControlSystemDemo::CustomCollisionDetectionFunction);
// -------------------------------------------------------------------------------------
// Register a RTS camera mode.
//
RTSCameraMode camMode13 = new RTSCameraMode(mCameraCS,
new Vector3(500, 1300, 1000)
, Vector3.NEGATIVE_UNIT_Z
, Vector3.NEGATIVE_UNIT_X
, new Radian(new Degree(70))
, 0, 1000);
mCameraCS.RegisterCameraMode("RTS", camMode13);
cameraModeNames.Add("RTS");
camMode13.MoveFactor = 20;
// -------------------------------------------------------------------------------------
// Register the custom "Dummy" camera mode defined previously. It basically goes forward
// and backward constantly
DummyCameraMode camMode14 = new DummyCameraMode(mCameraCS, 400);
mCameraCS.RegisterCameraMode("Dummy", (CameraMode)camMode14);
cameraModeNames.Add("Dummy");
// -------------------------------------------------------------------------------------
// Register an "OrbitalWithMouse" camera mode.
OrbitalWithMouseCameraMode camMode15 = new OrbitalWithMouseCameraMode(mCameraCS, MOIS.MouseButtonID.MB_Left, new Radian(0), new Radian(0), 200);
mCameraCS.RegisterCameraMode("Orbital + mouse", camMode15);
cameraModeNames.Add("Orbital + mouse");
camMode15.ZoomFactor = 3;
camMode15.RotationFactor = 10;
// -------------------------------------------------------------------------------------
// Register a spheric camera mode.
Vector3 relativePositionToCameraTarget = new Vector3(0, 50, -300);
// THIS IS NOT NECESSARY. just needed for the demo showing integer values in the sliders
relativePositionToCameraTarget = relativePositionToCameraTarget.NormalisedCopy * 300;
SphericCameraMode camMode16 = new SphericCameraMode(mCameraCS, relativePositionToCameraTarget, 700, Vector3.ZERO, Vector3.UNIT_Y);
// outer radious = inner radious = relativePositionToCameraTarget.length() for a perfect sphere
camMode16.HeightOffset = 50;
mCameraCS.RegisterCameraMode("Spherical", camMode16);
cameraModeNames.Add("Spherical");
// Set the camera target
mCameraCS.TargetNode = headNode;
//mCameraCS.CurrentCameraMode=camMode1;// fixed camera of cause works
//mCameraCS.CurrentCameraMode=camMode2;//fixed tracking camera works
//mCameraCS.CurrentCameraMode=camMode3;//chase camera works
//mCameraCS.CurrentCameraMode=camMode4;//first person camera works
//mCameraCS.CurrentCameraMode=camMode5;// plane binded (XY) (YZ) camera works
//mCameraCS.CurrentCameraMode=camMode6;// through target camera works, cs game
//mCameraCS.CurrentCameraMode=camMode7;// closest target camera works
//mCameraCS.CurrentCameraMode=camMode8;// attached camera works
//mCameraCS.CurrentCameraMode=camMode9;// free camera works
//mCameraCS.CurrentCameraMode=camMode10;// fix direction camera works
//mCameraCS.CurrentCameraMode = camMode12;// orbital camera works, but the head entity flickered
//mCameraCS.CurrentCameraMode=camMode13;// RTS camera works?
//mCameraCS.CurrentCameraMode=camMode14;// dummy camera works
mCameraCS.CurrentCameraMode = camMode15;// orbital with mouse camera works
//mCameraCS.CurrentCameraMode=camMode16;// spherical camera works
}
private void setupCameraControlSystem()
{
// Ogre::camera points to -Z by default
// Create the camera system using the previously created ogre camera.
mCameraCS = new CameraControlSystem(sceneMgr, "CameraControlSystem", camera);
// -------------------------------------------------------------------------------------
// Register a "Fixed" camera mode. In this mode the camera position and orientation
// never change.
FixedCameraMode camMode1;
camMode1 = new FixedCameraMode(mCameraCS, Vector3.UNIT_Y);
//mCameraCS->registerCameraMode("Fixed (2)",camMode1);
mCameraCS.RegisterCameraMode("Fixed", camMode1);
cameraModeNames.Add("Fixed");
camMode1.CameraPosition=new Vector3(-500, 0, -500);
float roll = 0; float yaw = 225; float pitch = 10;
camMode1.CameraOrientation=new Quaternion(new Radian(new Degree(roll)), Vector3.UNIT_Z)
* new Quaternion(new Radian(new Degree(yaw)), Vector3.UNIT_Y)
* new Quaternion(new Radian(new Degree(pitch)), Vector3.UNIT_X);
// -------------------------------------------------------------------------------------
// Register a "FixedTracking" camera mode. In this mode the camera position is fixed
// and the camera always points to the target.
FixedTrackingCameraMode camMode2;
camMode2 = new FixedTrackingCameraMode(mCameraCS, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("FixedTracking", camMode2);
cameraModeNames.Add("FixedTracking");
camMode2.CameraPosition=new Vector3(500, 0, -100);
// -------------------------------------------------------------------------------------
// Register a "Chase" camera mode with default tightness (0.01). In
// this mode the camera follows the target. The second parameter is the relative position
// to the target. The orientation of the camera is fixed by a yaw axis (UNIT_Y by default).
ChaseCameraMode camMode3;
camMode3 = new ChaseCameraMode(mCameraCS, new Vector3(0, 0, -200), Vector3.UNIT_Y);
//mCameraCS.registerCameraMode("Chase(0.01 tightness)",camMode3);
mCameraCS.RegisterCameraMode("Chase", camMode3);
cameraModeNames.Add("Chase");
// -------------------------------------------------------------------------------------
// Register a "ChaseFreeYawAxis" camera mode with max tightness. This mode is
// similar to "Chase" camera mode but the camera orientation is not fixed by
// a yaw axis. The camera orientation will be the same as the target.
camMode3 = new ChaseFreeYawAxisCameraMode(mCameraCS, new Vector3(0, 0, -200)
, new Radian(0), new Radian(new Degree(180)), new Radian(0));
mCameraCS.RegisterCameraMode("ChaseFreeYawAxis", camMode3);
cameraModeNames.Add("ChaseFreeYawAxis");
camMode3.CameraTightness = 0.05f;
// -------------------------------------------------------------------------------------
// Register a "FirstPerson" camera mode.
//FirstPersonCameraMode* camMode4 = new FirstPersonCameraMode(mCameraCS,Vector3(0,17,-16)
FirstPersonCameraMode camMode4 = new FirstPersonCameraMode(mCameraCS, new Vector3(0, 6, -20)
, new Radian(0), new Radian(new Degree(180)), new Radian(0));
mCameraCS.RegisterCameraMode("FirstPerson", camMode4);
cameraModeNames.Add("FirstPerson");
camMode4.IsCharacterVisible = false;
// -------------------------------------------------------------------------------------
// Register a "PlaneBinded" camera mode. In this mode the camera is constrained to the
// limits of a plane. The camera always points to the target, perpendicularly to the plane.
Plane mPlane = new Plane(Vector3.UNIT_Z, new Vector3(0, 0, -200));
PlaneBindedCameraMode camMode5 = new PlaneBindedCameraMode(mCameraCS, mPlane, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("PlaneBinded (XY)", camMode5);
cameraModeNames.Add("PlaneBinded (XY)");
// -------------------------------------------------------------------------------------
// Register another "PlaneBinded" camera mode using a top point of view.
// mPlane = new Plane(Vector3.UNIT_Y, new Vector3(0, 1000, 0));
// camMode5 = new PlaneBindedCameraMode(mCameraCS, mPlane, Vector3.UNIT_Z);
// mCameraCS.registerCameraMode("PlaneBinded (XZ)", camMode5);
// cameraModeNames.Add("PlaneBinded (XZ)");
// -------------------------------------------------------------------------------------
// Register a "ThroughTarget" camera mode. In this mode the camera points to a given
// position (the "focus") throuh the target. The camera orientation is fixed by a yaw axis.
ThroughTargetCameraMode camMode6 = new ThroughTargetCameraMode(mCameraCS, 400, Vector3.ZERO, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("ThroughTarget", camMode6);
cameraModeNames.Add("ThroughTarget");
//camMode6.CameraFocusPosition=atheneNode._getDerivedPosition() - Vector3(0,100,0);
camMode6.CameraFocusPosition=atheneNode._getDerivedPosition() + new Vector3(0, 100, 0);
// -------------------------------------------------------------------------------------
// Register a "ClosestToTarget" camera mode. In this camera mode the position of the
// camera is chosen to be the closest to the target of a given list. The camera
// orientation is fixed by a yaw axis.
ClosestToTargetCameraMode camMode7 = new ClosestToTargetCameraMode(mCameraCS, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("ClosestToTarget", camMode7);
cameraModeNames.Add("ClosestToTarget");
Vector3 camPos1 = new Vector3(-400, 0, -400);
Vector3 camPos2 = new Vector3(-400, 0, 1400);
Vector3 camPos3 = new Vector3(1400, 0, 1400);
camMode7.AddCameraPosition(camPos1);
camMode7.AddCameraPosition(camPos2);
camMode7.AddCameraPosition(camPos3);
// -------------------------------------------------------------------------------------
// Register an "Attached" camera mode. In this mode the camera node is attached to the
// target node as a child.
AttachedCameraMode camMode8 = new AttachedCameraMode(mCameraCS, new Vector3(200, 0, 0)
, new Radian(0), new Radian(new Degree(90)), new Radian(0));
//mCameraCS.registerCameraMode("Attached (lateral)",camMode8);
mCameraCS.RegisterCameraMode("Attached", camMode8);
cameraModeNames.Add("Attached");
// -------------------------------------------------------------------------------------
// Register a "Free" camera mode. In this mode the camera is controlled by the user.
// The camera orientation is fixed to a yaw axis.
yaw = 225; pitch = -10;
FreeCameraMode camMode9 = new FreeCameraMode(mCameraCS, Vector3.ZERO, new Degree(yaw), new Degree(pitch)
, SwitchingMode.CurrentState);
mCameraCS.RegisterCameraMode("Free", camMode9);
cameraModeNames.Add("Free");
camMode9.MoveFactor=30;
// -------------------------------------------------------------------------------------
// Register a "FixedDirection" camera mode. In this mode the
// target is always seen from the same point of view.
FixedDirectionCameraMode camMode10 = new FixedDirectionCameraMode(mCameraCS, new Vector3(-1, -1, -1), 1000, Vector3.UNIT_Y);
mCameraCS.RegisterCameraMode("Fixed direction", camMode10);
cameraModeNames.Add("Fixed direction");
camMode10.CameraTightness=0.01f;
// -------------------------------------------------------------------------------------
// Register an "Orbital" camera mode. This is basically an attached camera mode where the user
// can mofify the camera position. If the scene focus is seen as the center of a sphere, the camera rotates arount it.
// The last parameter indicates if the camera should be reset to its initial position when this mode is selected.
OrbitalCameraMode camMode12 = new OrbitalCameraMode(mCameraCS, new Radian(0), new Radian(0), 200, false);
mCameraCS.RegisterCameraMode("Orbital", camMode12);
cameraModeNames.Add("Orbital");
camMode12.ZoomFactor=100;
camMode12.RotationFactor=50;
//camMode12.CollisionsEnabled = true;
//camMode12.collisionDelegate = camMode12.DefaultCollisionDetectionFunction;
// ** Uncomment for custom collisions calculation. By default the collisions are based on ogre basic raycast feature **
//camMode12.collisionDelegate = CollidableCamera::newCollisionDelegate(this
// , &CameraControlSystemDemo::CustomCollisionDetectionFunction);
// -------------------------------------------------------------------------------------
// Register a RTS camera mode.
//
RTSCameraMode camMode13 = new RTSCameraMode(mCameraCS,
new Vector3(500, 1300, 1000)
, Vector3.NEGATIVE_UNIT_Z
, Vector3.NEGATIVE_UNIT_X
, new Radian(new Degree(70))
, 0, 1000);
mCameraCS.RegisterCameraMode("RTS", camMode13);
cameraModeNames.Add("RTS");
camMode13.MoveFactor=20;
// -------------------------------------------------------------------------------------
// Register the custom "Dummy" camera mode defined previously. It basically goes forward
// and backward constantly
DummyCameraMode camMode14 = new DummyCameraMode(mCameraCS, 400);
mCameraCS.RegisterCameraMode("Dummy", (CameraMode)camMode14);
cameraModeNames.Add("Dummy");
// -------------------------------------------------------------------------------------
// Register an "OrbitalWithMouse" camera mode.
OrbitalWithMouseCameraMode camMode15 = new OrbitalWithMouseCameraMode(mCameraCS, MOIS.MouseButtonID.MB_Left, new Radian(0), new Radian(0), 200);
mCameraCS.RegisterCameraMode("Orbital + mouse", camMode15);
cameraModeNames.Add("Orbital + mouse");
camMode15.ZoomFactor=3;
camMode15.RotationFactor=10;
// -------------------------------------------------------------------------------------
// Register a spheric camera mode.
Vector3 relativePositionToCameraTarget = new Vector3(0, 50, -300);
// THIS IS NOT NECESSARY. just needed for the demo showing integer values in the sliders
relativePositionToCameraTarget = relativePositionToCameraTarget.NormalisedCopy * 300;
SphericCameraMode camMode16 = new SphericCameraMode(mCameraCS, relativePositionToCameraTarget, 700, Vector3.ZERO, Vector3.UNIT_Y);
// outer radious = inner radious = relativePositionToCameraTarget.length() for a perfect sphere
camMode16.HeightOffset = 50;
mCameraCS.RegisterCameraMode("Spherical", camMode16);
cameraModeNames.Add("Spherical");
// Set the camera target
mCameraCS.TargetNode = headNode;
//mCameraCS.CurrentCameraMode=camMode1;// fixed camera of cause works
//mCameraCS.CurrentCameraMode=camMode2;//fixed tracking camera works
//mCameraCS.CurrentCameraMode=camMode3;//chase camera works
//mCameraCS.CurrentCameraMode=camMode4;//first person camera works
//mCameraCS.CurrentCameraMode=camMode5;// plane binded (XY) (YZ) camera works
//mCameraCS.CurrentCameraMode=camMode6;// through target camera works, cs game
//mCameraCS.CurrentCameraMode=camMode7;// closest target camera works
//mCameraCS.CurrentCameraMode=camMode8;// attached camera works
//mCameraCS.CurrentCameraMode=camMode9;// free camera works
//mCameraCS.CurrentCameraMode=camMode10;// fix direction camera works
//mCameraCS.CurrentCameraMode = camMode12;// orbital camera works, but the head entity flickered
//mCameraCS.CurrentCameraMode=camMode13;// RTS camera works?
//mCameraCS.CurrentCameraMode=camMode14;// dummy camera works
mCameraCS.CurrentCameraMode=camMode15;// orbital with mouse camera works
//mCameraCS.CurrentCameraMode=camMode16;// spherical camera works
}
