public string GetTan(FinService aService)
{
if (m_vList.Count == 0)
{
throw new InvalidOperationException("Keine TAN-Nummern in Liste!");
}
FinTanProcessParameters aTanProc = aService.TanProcess;
FinChallengeInfo aChallengeInfo = aService.ChallengeInfo;
// If this is not a 2-step TAN procedure then we always just return the very first
// TAN of the list.
if ((aTanProc == null) || (aChallengeInfo == null))
{
Tan aTan = (Tan)m_vList[0];
return aTan.TAN;
}
string sChallenge = aChallengeInfo.Challenge;
int nIndex = GetIndexFromChallenge(sChallenge);
if (nIndex >= 0)
{
string sTAN = FindTan(nIndex);
if (sTAN != null)
{
return sTAN;
}
}
io.Write("Keine TAN für " + sChallenge + "in TAN-Datei gefunden!");
return null;
}
protected override ResponseData OnGetResponseData(FinService service, FinOrder order)
{
FinXmlOrder aXmlOrder = order as FinXmlOrder;
if (aXmlOrder == null)
{
return null;
}
XmlDocument aResponseXml = aXmlOrder.ResponseXml;
if (aResponseXml == null)
{
return null;
}
using (StringWriter aStringWriter = new StringWriter())
{
XmlTextWriter aXmlWriter = new XmlTextWriter(aStringWriter)
{
Formatting = Formatting.Indented
};
aResponseXml.WriteContentTo(aXmlWriter);
aXmlWriter.Flush();
aStringWriter.Flush();
return new ResponseData { Formatted = aStringWriter.ToString() };
}
}
protected override ResponseData OnGetResponseData(FinService service, FinOrder order)
{
FinAcctMvmtsSpecifiedPeriod aAcctMvmts = order as FinAcctMvmtsSpecifiedPeriod;
if (aAcctMvmts == null)
{
return(null);
}
switch (m_nFormat)
{
case OutputFormat.CSV:
return(new ResponseData {
Formatted = _GetCsvResponseData(aAcctMvmts)
});
case OutputFormat.MT940:
return(new ResponseData {
Formatted = _GetMT940ResponseData(aAcctMvmts)
});
case OutputFormat.MT942:
return(new ResponseData {
Formatted = _GetMT942ResponseData(aAcctMvmts)
});
case OutputFormat.CSV942:
return(new ResponseData {
Formatted = _GetCsv942ResponseData(aAcctMvmts)
});
default:
return(null);
}
}
IList <Statement> DownloadStatement()
{
log.DebugFormat("Download {0}", AccountId);
FinContact contact = FinContactFolder.Default.FindContact(AccountId);
List <Statement> s = new List <Statement>();
foreach (FinAcctInfo aAcctInfo in contact.UPD)
{
try
{
FinAcct acct = aAcctInfo.Acct;
log.DebugFormat("Downloading account {0}/{1}", acct.BankCode, acct.AcctNo);
FinService service = new FinService(contact, acct.BankCode, acct.AcctNo, acct.Currency);
service.LogOn(Password);
FinAcctMvmtsSpecifiedPeriod aAcctMvmts = service.DownloadStatement(SwiftDate.NullDate);
service.LogOff();
if (aAcctMvmts != null)
{
s.Add(ToStatement(acct, aAcctMvmts.BookedTrans));
}
}
catch (Exception e)
{
log.Error("Error while downloading " + AccountId, e);
}
}
return(s);
}
protected override ResponseData OnGetResponseData(FinService service, FinOrder order)
{
FinXmlOrder aXmlOrder = order as FinXmlOrder;
if (aXmlOrder == null)
{
return(null);
}
XmlDocument aResponseXml = aXmlOrder.ResponseXml;
if (aResponseXml == null)
{
return(null);
}
using (StringWriter aStringWriter = new StringWriter())
{
XmlTextWriter aXmlWriter = new XmlTextWriter(aStringWriter)
{
Formatting = Formatting.Indented
};
aResponseXml.WriteContentTo(aXmlWriter);
aXmlWriter.Flush();
aStringWriter.Flush();
return(new ResponseData {
Formatted = aStringWriter.ToString()
});
}
}
public string GetTan(FinService aService)
{
if (m_vList.Count == 0)
{
throw new InvalidOperationException("Keine TAN-Nummern in Liste!");
}
FinTanProcessParameters aTanProc = aService.TanProcess;
FinChallengeInfo aChallengeInfo = aService.ChallengeInfo;
// If this is not a 2-step TAN procedure then we always just return the very first
// TAN of the list.
if ((aTanProc == null) || (aChallengeInfo == null))
{
Tan aTan = (Tan)m_vList[0];
return(aTan.TAN);
}
string sChallenge = aChallengeInfo.Challenge;
int nIndex = GetIndexFromChallenge(sChallenge);
if (nIndex >= 0)
{
string sTAN = FindTan(nIndex);
if (sTAN != null)
{
return(sTAN);
}
}
io.Write("Keine TAN für " + sChallenge + "in TAN-Datei gefunden!");
return(null);
}
protected override ResponseData OnGetResponseData(FinService service, FinOrder order)
{
FinAcctMvmtsSpecifiedPeriod aAcctMvmts = order as FinAcctMvmtsSpecifiedPeriod;
if (aAcctMvmts == null)
{
return null;
}
return _GetResponseData(aAcctMvmts);
}
protected override ResponseData OnGetResponseData(FinService service, FinOrder order)
{
FinAcctMvmtsSpecifiedPeriod aAcctMvmts = order as FinAcctMvmtsSpecifiedPeriod;
if (aAcctMvmts == null)
{
return(null);
}
return(_GetResponseData(aAcctMvmts));
}
public static FinService GetFinService(FinContact contact, FinDialog dialog, StringDictionary arguments)
{
if (contact == null)
{
throw new ArgumentNullException("contact");
}
string acctBankCode = arguments[Arguments.AcctBankCode] ?? contact.BankCode;
if (acctBankCode == null)
{
throw new ArgumentException("Bankleitzahl zu Konto fehlt!");
}
if (acctBankCode.Length != 8 || !FinUtil.IsDigits(acctBankCode))
{
throw new ArgumentException("Bankleitzahl zu Konto ist ungültig!");
}
string acctNo = arguments[Arguments.AcctNo];
if (acctNo == null)
{
throw new ArgumentException("Kontonummer fehlt!");
}
if (acctNo == "" || acctNo.Length > 30)
{
throw new ArgumentException("Kontonummer ist ungültig!");
}
string acctCurrency = arguments["-acctcurrency"];
if (acctCurrency == null)
{
acctCurrency = "EUR";
}
else if (acctCurrency.Length != 3 || !FinUtil.IsUpperAscii(acctCurrency))
{
throw new ArgumentException("Kontowährung ist ungültig!");
}
// Die Bankverbindung ist jetzt vollständig spezifiziert und wir können ein
// FinService Objekt dafür anlegen.
FinService aService = dialog != null ?
new FinService(dialog, acctBankCode, acctNo, acctCurrency) :
new FinService(contact, acctBankCode, acctNo, acctCurrency);
return(aService);
}
public string GetTan(FinService aService)
{
FinTanProcessParameters tanProcess = aService.TanProcess;
FinChallengeInfo aChallengeInfo = aService.ChallengeInfo;
if ((tanProcess != null) && (aChallengeInfo != null))
{
io.Write(tanProcess.ChallengeLabel + ": ");
io.Write(aChallengeInfo.Challenge);
}
io.Write("TAN:");
string sTAN = io.Read();
return !string.IsNullOrEmpty(sTAN) ? sTAN : null;
}
public string GetTan(FinService aService)
{
FinTanProcessParameters tanProcess = aService.TanProcess;
FinChallengeInfo aChallengeInfo = aService.ChallengeInfo;
if ((tanProcess != null) && (aChallengeInfo != null))
{
io.Write(tanProcess.ChallengeLabel + ": ");
io.Write(aChallengeInfo.Challenge);
}
io.Write("TAN:");
string sTAN = io.Read();
return(!string.IsNullOrEmpty(sTAN) ? sTAN : null);
}
protected override FinOrder OnCreateOrder(FinService aService)
{
// Egal was der Aufrufer eingestellt hat. Als Auftragskonto stellen wir das Konto
// der Bankverbindung ein.
Debug.Assert(m_aXmlDocument.DocumentElement != null, "m_aXmlDocument.DocumentElement != null");
XmlElement xmlOrderingCustAcct = m_aXmlDocument.DocumentElement["OrderingCustAcct"];
if (xmlOrderingCustAcct == null)
{
xmlOrderingCustAcct = m_aXmlDocument.CreateElement("OrderingCustAcct");
Debug.Assert(m_aXmlDocument.DocumentElement != null, "m_aXmlDocument.DocumentElement != null");
m_aXmlDocument.DocumentElement.PrependChild(xmlOrderingCustAcct);
}
FinAcct aAcct = aService.GetAcct();
XmlElement xml = m_aXmlDocument.CreateElement("AcctNo");
xml.InnerText = aAcct.AcctNo;
xmlOrderingCustAcct.AppendChild(xml);
if (aAcct.SubAcctCharacteristic != null)
{
xml = m_aXmlDocument.CreateElement("SubAcctCharacteristic");
xml.InnerText = aAcct.SubAcctCharacteristic;
xmlOrderingCustAcct.AppendChild(xml);
}
XmlElement xmlBankID = m_aXmlDocument.CreateElement("BankID");
xmlOrderingCustAcct.AppendChild(xmlBankID);
xml = m_aXmlDocument.CreateElement("CountryCode");
xml.InnerText = aAcct.CountryCode;
xmlBankID.AppendChild(xml);
xml = m_aXmlDocument.CreateElement("BankCode");
xml.InnerText = aAcct.BankCode;
xmlBankID.AppendChild(xml);
FinXmlOrderBuilder aXmlOrderBuilder = new FinXmlOrderBuilder(aService.Contact, m_aSyntax);
return(aXmlOrderBuilder.Build(m_aXmlDocument.DocumentElement));
}
protected override FinOrder OnCreateOrder(FinService aService)
{
// Egal was der Aufrufer eingestellt hat. Als Auftragskonto stellen wir das Konto
// der Bankverbindung ein.
Debug.Assert(m_aXmlDocument.DocumentElement != null, "m_aXmlDocument.DocumentElement != null");
XmlElement xmlOrderingCustAcct = m_aXmlDocument.DocumentElement["OrderingCustAcct"];
if (xmlOrderingCustAcct == null)
{
xmlOrderingCustAcct = m_aXmlDocument.CreateElement("OrderingCustAcct");
Debug.Assert(m_aXmlDocument.DocumentElement != null, "m_aXmlDocument.DocumentElement != null");
m_aXmlDocument.DocumentElement.PrependChild(xmlOrderingCustAcct);
}
FinAcct aAcct = aService.GetAcct();
XmlElement xml = m_aXmlDocument.CreateElement("AcctNo");
xml.InnerText = aAcct.AcctNo;
xmlOrderingCustAcct.AppendChild(xml);
if (aAcct.SubAcctCharacteristic != null)
{
xml = m_aXmlDocument.CreateElement("SubAcctCharacteristic");
xml.InnerText = aAcct.SubAcctCharacteristic;
xmlOrderingCustAcct.AppendChild(xml);
}
XmlElement xmlBankID = m_aXmlDocument.CreateElement("BankID");
xmlOrderingCustAcct.AppendChild(xmlBankID);
xml = m_aXmlDocument.CreateElement("CountryCode");
xml.InnerText = aAcct.CountryCode;
xmlBankID.AppendChild(xml);
xml = m_aXmlDocument.CreateElement("BankCode");
xml.InnerText = aAcct.BankCode;
xmlBankID.AppendChild(xml);
FinXmlOrderBuilder aXmlOrderBuilder = new FinXmlOrderBuilder(aService.Contact, m_aSyntax);
return aXmlOrderBuilder.Build(m_aXmlDocument.DocumentElement);
}
protected override ResponseData OnGetResponseData(FinService service, FinOrder order)
{
FinAcctBal acctBal = order as FinAcctBal;
if ((acctBal == null) || (acctBal.AcctBals == null))
{
return null;
}
StringBuilder sb = new StringBuilder(2000);
sb.Append("BalanceType;BankCode;AcctNo;Date;Currency;Value");
sb.Append(Environment.NewLine);
foreach (FinAcctBalResp aBal in acctBal.AcctBals)
{
_AppendBalance(aBal, sb);
}
return new ResponseData {Formatted = sb.ToString() };
}
protected override ResponseData OnGetResponseData(FinService service, FinOrder order)
{
FinAcctMvmtsSpecifiedPeriod aAcctMvmts = order as FinAcctMvmtsSpecifiedPeriod;
if (aAcctMvmts == null)
{
return null;
}
switch (m_nFormat)
{
case OutputFormat.CSV:
return new ResponseData { Formatted = _GetCsvResponseData(aAcctMvmts) };
case OutputFormat.MT940:
return new ResponseData { Formatted = _GetMT940ResponseData(aAcctMvmts) };
case OutputFormat.MT942:
return new ResponseData { Formatted = _GetMT942ResponseData(aAcctMvmts) };
case OutputFormat.CSV942:
return new ResponseData { Formatted = _GetCsv942ResponseData(aAcctMvmts) };
default:
return null;
}
}
protected override ResponseData OnGetResponseData(FinService service, FinOrder order)
{
FinAcctBal acctBal = order as FinAcctBal;
if ((acctBal == null) || (acctBal.AcctBals == null))
{
return(null);
}
StringBuilder sb = new StringBuilder(2000);
sb.Append("BalanceType;BankCode;AcctNo;Date;Currency;Value");
sb.Append(Environment.NewLine);
foreach (FinAcctBalResp aBal in acctBal.AcctBals)
{
_AppendBalance(aBal, sb);
}
return(new ResponseData {
Formatted = sb.ToString()
});
}
protected abstract FinOrder OnCreateOrder(FinService aService);
public virtual ResponseData GetResponseData(FinService aService)
{
return(OnGetResponseData(aService, order));
}
public virtual IActionResult Execute(FinService service, ITanSource tanSource)
{
order = OnCreateOrder(service);
if (order == null)
{
return(new ActionResult(Status.CouldNotCreateOrder));
}
FinServiceResult result = service.SendOrder(order);
if (result == FinServiceResult.NeedTan)
{
string tan = tanSource.GetTan(service);
if (tan == null)
{
return(new ActionResult(Status.CouldNotCreateOrder));
}
result = service.SendTan(tan);
}
if (result == FinServiceResult.NeedTanMediaName)
{
Io.Write("Bezeichnung des TAN-Mediums erforderlich!");
FinTanMedia[] vTanMedias = service.TanMedias;
if (vTanMedias != null)
{
Io.Write("Bitte geben Sie einen der folgenden Parameter an:");
foreach (FinTanMedia t in vTanMedias)
{
Io.Write("-tanmedianame \"" + t.TanMediaName + "\"");
}
}
return(new ActionResult(Status.NeedTanMediaName));
}
if (result == FinServiceResult.Fatal)
{
return(new ActionResult(Status.FatalResult));
}
// Als Rückgabewert wird der höchste Rückmeldecode aus dem HIRMS genommen.
// Wurde kein HIRMS übermittelt wird als Rückgabewert 0 eingesetzt.
int orderStatusCode = 0;
if (order.StatusSegment != null)
{
int nIndex = order.StatusSegment.FindMax();
orderStatusCode = order.StatusSegment.GetStatusCode(nIndex);
}
if (result == FinServiceResult.Error)
{
return(new ActionResult(Status.ErrorResult, orderStatusCode));
}
if (result == FinServiceResult.Success)
{
return(new ActionResult(Status.Success, orderStatusCode));
}
throw new Exception("The enum FinServiceResult has been changed! " +
"Known states: NeedTan, NeedTanMediaName, Fatal, Error, Success " +
"New: " + result);
}
protected virtual ResponseData OnGetResponseData(FinService service, FinOrder order)
{
return(null);
}
public string GetTan(FinService aService)
{
return tan;
}
protected override FinOrder OnCreateOrder(FinService aService)
{
return(aService.CreateBalance(false));
}
protected override FinOrder OnCreateOrder(FinService aService)
{
return aService.CreateDownloadStatement(m_tFromDate);
}
protected override FinOrder OnCreateOrder(FinService aService)
{
return aService.CreateRemitt(m_aRemitt);
}
protected override FinOrder OnCreateOrder(FinService aService)
{
return aService.CreateBalance(false);
}
protected override FinOrder OnCreateOrder(FinService aService)
{
return(aService.CreateRemitt(m_aRemitt));
}
protected abstract FinOrder OnCreateOrder(FinService aService);
protected override FinOrder OnCreateOrder(FinService aService)
{
FinAcct aAcct = aService.GetAcct();
// Depending on the type of the SEPA document a suitable HBCI segment type is
// determined. This is done with the help of a very convenient property of the
// SepaDocument class.
FinSepaOrderBuilder aSepaOrderBuilder = null;
switch (m_aSepaDoc.HbciSegmentType)
{
case "HKCCS":
aSepaOrderBuilder = new FinSepaSingRemittBuilder(aService.Contact);
break;
case "HKCSE":
aSepaOrderBuilder = new FinSepaSubmitPostdatedSingRemittBuilder(aService.Contact);
break;
case "HKCCM":
aSepaOrderBuilder = new FinSepaMultRemittBuilder(aService.Contact);
break;
case "HKCME":
aSepaOrderBuilder = new FinSepaSubmitPostdatedMultRemittBuilder(aService.Contact);
break;
case "HKDSE":
aSepaOrderBuilder = new FinSepaSubmitPostdatedSingDirDebBuilder(aService.Contact);
break;
case "HKDSC":
aSepaOrderBuilder = new FinSepaSubmitPostdatedCor1SingDirDebBuilder(aService.Contact);
break;
case "HKBSE":
aSepaOrderBuilder = new FinSepaSubmitPostdatedBusinessSingDirDebBuilder(aService.Contact);
break;
case "HKDME":
aSepaOrderBuilder = new FinSepaSubmitPostdatedMultDirDebBuilder(aService.Contact);
break;
case "HKDMC":
aSepaOrderBuilder = new FinSepaSubmitPostdatedCor1MultDirDebBuilder(aService.Contact);
break;
case "HKBME":
aSepaOrderBuilder = new FinSepaSubmitPostdatedBusinessMultDirDebBuilder(aService.Contact);
break;
}
// If no suitable segment type could be determined, or the required segment type is
// not supported by the bank, then bail out.
if (aSepaOrderBuilder == null)
{
Io.Error.Write("Keine HBCI-Auftragsart für SEPA-Dokument bekannt!");
return(null);
}
if (!aSepaOrderBuilder.IsSupported)
{
Io.Error.Write("HBCI-Auftragsart " + m_aSepaDoc.HbciSegmentType + " von Bank nicht unterstützt!");
return(null);
}
if (aSepaOrderBuilder.FindSepaFormat(m_aSepaDoc.MessageInfo.PainIdentifier) == null)
{
Io.Error.Write("SEPA-Format " + m_aSepaDoc.MessageInfo.PainIdentifier + " von Bank nicht unterstützt!");
return(null);
}
return(aSepaOrderBuilder.Build(aAcct, m_aSepaDoc));
}
public virtual IActionResult Execute(FinService service, ITanSource tanSource)
{
order = OnCreateOrder(service);
if (order == null)
{
return new ActionResult(Status.CouldNotCreateOrder);
}
FinServiceResult result = service.SendOrder(order);
if (result == FinServiceResult.NeedTan)
{
string tan = tanSource.GetTan(service);
if (tan == null)
{
return new ActionResult(Status.CouldNotCreateOrder);
}
result = service.SendTan(tan);
}
if (result == FinServiceResult.NeedTanMediaName)
{
Io.Write("Bezeichnung des TAN-Mediums erforderlich!");
FinTanMedia[] vTanMedias = service.TanMedias;
if (vTanMedias != null)
{
Io.Write("Bitte geben Sie einen der folgenden Parameter an:");
foreach (FinTanMedia t in vTanMedias)
{
Io.Write("-tanmedianame \"" + t.TanMediaName + "\"");
}
}
return new ActionResult(Status.NeedTanMediaName);
}
if (result == FinServiceResult.Fatal)
{
return new ActionResult(Status.FatalResult);
}
// Als Rückgabewert wird der höchste Rückmeldecode aus dem HIRMS genommen.
// Wurde kein HIRMS übermittelt wird als Rückgabewert 0 eingesetzt.
int orderStatusCode = 0;
if (order.StatusSegment != null)
{
int nIndex = order.StatusSegment.FindMax();
orderStatusCode = order.StatusSegment.GetStatusCode(nIndex);
}
if (result == FinServiceResult.Error)
{
return new ActionResult(Status.ErrorResult, orderStatusCode);
}
if (result == FinServiceResult.Success)
{
return new ActionResult(Status.Success, orderStatusCode);
}
throw new Exception("The enum FinServiceResult has been changed! " +
"Known states: NeedTan, NeedTanMediaName, Fatal, Error, Success " +
"New: " + result);
}
protected virtual ResponseData OnGetResponseData(FinService service, FinOrder order)
{
return null;
}
protected override FinOrder OnCreateOrder(FinService aService)
{
return(aService.CreateDownloadStatement(m_tFromDate));
}
public string GetTan(FinService aService)
{
return(tan);
}
IList<Statement> DownloadStatement()
{
log.DebugFormat("Download {0}", AccountId);
FinContact contact = FinContactFolder.Default.FindContact(AccountId);
List<Statement> s = new List<Statement>();
foreach (FinAcctInfo aAcctInfo in contact.UPD)
{
try
{
FinAcct acct = aAcctInfo.Acct;
log.DebugFormat("Downloading account {0}/{1}", acct.BankCode, acct.AcctNo);
FinService service = new FinService(contact, acct.BankCode, acct.AcctNo, acct.Currency);
service.LogOn(Password);
FinAcctMvmtsSpecifiedPeriod aAcctMvmts = service.DownloadStatement(SwiftDate.NullDate);
service.LogOff();
if (aAcctMvmts != null)
{
s.Add(ToStatement(acct, aAcctMvmts.BookedTrans));
}
}
catch (Exception e)
{
log.Error("Error while downloading " + AccountId, e);
}
}
return s;
}
protected override FinOrder OnCreateOrder(FinService aService)
{
FinAcct aAcct = aService.GetAcct();
// Depending on the type of the SEPA document a suitable HBCI segment type is
// determined. This is done with the help of a very convenient property of the
// SepaDocument class.
FinSepaOrderBuilder aSepaOrderBuilder = null;
switch (m_aSepaDoc.HbciSegmentType)
{
case "HKCCS":
aSepaOrderBuilder = new FinSepaSingRemittBuilder(aService.Contact);
break;
case "HKCSE":
aSepaOrderBuilder = new FinSepaSubmitPostdatedSingRemittBuilder(aService.Contact);
break;
case "HKCCM":
aSepaOrderBuilder = new FinSepaMultRemittBuilder(aService.Contact);
break;
case "HKCME":
aSepaOrderBuilder = new FinSepaSubmitPostdatedMultRemittBuilder(aService.Contact);
break;
case "HKDSE":
aSepaOrderBuilder = new FinSepaSubmitPostdatedSingDirDebBuilder(aService.Contact);
break;
case "HKDSC":
aSepaOrderBuilder = new FinSepaSubmitPostdatedCor1SingDirDebBuilder(aService.Contact);
break;
case "HKBSE":
aSepaOrderBuilder = new FinSepaSubmitPostdatedBusinessSingDirDebBuilder(aService.Contact);
break;
case "HKDME":
aSepaOrderBuilder = new FinSepaSubmitPostdatedMultDirDebBuilder(aService.Contact);
break;
case "HKDMC":
aSepaOrderBuilder = new FinSepaSubmitPostdatedCor1MultDirDebBuilder(aService.Contact);
break;
case "HKBME":
aSepaOrderBuilder = new FinSepaSubmitPostdatedBusinessMultDirDebBuilder(aService.Contact);
break;
}
// If no suitable segment type could be determined, or the required segment type is
// not supported by the bank, then bail out.
if (aSepaOrderBuilder == null)
{
Io.Error.Write("Keine HBCI-Auftragsart für SEPA-Dokument bekannt!");
return null;
}
if (!aSepaOrderBuilder.IsSupported)
{
Io.Error.Write("HBCI-Auftragsart " + m_aSepaDoc.HbciSegmentType + " von Bank nicht unterstützt!");
return null;
}
if (aSepaOrderBuilder.FindSepaFormat(m_aSepaDoc.MessageInfo.PainIdentifier) == null)
{
Io.Error.Write("SEPA-Format " + m_aSepaDoc.MessageInfo.PainIdentifier + " von Bank nicht unterstützt!");
return null;
}
return aSepaOrderBuilder.Build(aAcct, m_aSepaDoc);
}
public IActionResult DoAction(string action, StringDictionary arguments)
{
// In jedem Fall wird die PIN oder der Dialogkontext zur Fortführung benötigt.
string pin = arguments[Arguments.Pin];
string resume = arguments[Arguments.Resume];
// Optional kann eine TAN oder eine TAN-Liste mitgegeben werden.
// Wird beides nicht mitgegeben, so wird die TAN auf der Kommandozeile abgefragt.
ITanSource tanSource = tanSourceFactory.GetTanSource(arguments);
// Optional kann eine Datei für den HBCI-FinTsTrace angegeben werden.
string traceFile = arguments[Arguments.Trace];
// Wird der Schalter -suspend angegeben, so wird nach der Aktion keine
// Dialogbeendigung durchgeführt, sondern einfach der Zustand in die angegebene Datei gespeichert.
string suspend = arguments[Arguments.Suspend];
// Die IAction Implementierung für die gewünschte Aktion erstellen.
IAction cmd = actionFactory.GetAction(action);
if (!cmd.Parse(action, arguments))
{
throw new ArgumentException("Wrong arguments for the given action!");
}
FinContact contact;
FinDialog dialog = null;
if (resume != null)
{
dialog = new FinDialog();
dialog.Load(resume);
contact = dialog.Contact;
}
else
{
contact = FinContactCreator.GetFinContact(arguments);
}
FinService service = FinServiceCreator.GetFinService(contact, dialog, arguments);
IActionResult result = new ActionResult(Status.Unknown);
try
{
service.ClearDocket();
if (!service.Online)
{
// Hinweis: eine erforderliche Synchronisierung wird von LogOn immer automatisch durchführt.
if (!service.LogOn(pin))
{
result = new ActionResult(Status.CouldNotLogOn);
goto _done;
}
}
if (service.Online)
{
result = cmd.Execute(service, tanSource);
if (suspend != null)
{
service.Dialog.SaveAs(suspend);
}
else
{
service.LogOff();
}
}
_done:
// Falls der Bankkontakt aus einer Datei geladen wurde, so muss diese nun noch
// gespeichert werden, damit auch alle am Bankkontakt erfolgten Änderungen
// erhalten bleiben.
string sContactFile = arguments[Arguments.ContactFile];
if (sContactFile != null)
{
contact.SaveAs(sContactFile);
}
// Wurde eine Tracedatei angegeben, so wird der komplette HBCI FinTsTrace in diese
// Datei geschrieben.
if (traceFile != null)
{
StreamWriter sw = File.CreateText(traceFile);
sw.Write(service.Trace);
sw.Close();
}
// Auftrag ausgeführt. Zuerst geben wir den gesammelten Laufzettel aus,
// danach die Antwortdaten, sofern welche vorhanden sind.
io.Write(service.Docket);
if (result.Status != Status.CouldNotLogOn)
{
ResponseData responseData = cmd.GetResponseData(service);
if (responseData.Formatted != null)
{
io.Write(responseData.Formatted);
}
result.Response = responseData;
}
}
catch (Exception x)
{
throw new ActionException(x, service.Trace);
}
finally
{
service.Dispose();
}
return(result);
}
public virtual ResponseData GetResponseData(FinService aService)
{
return OnGetResponseData(aService, order);
}
