/// <summary>
/// Generate drawing document with input model document
/// </summary>
/// <param name="filePath">File path for the generated drawing document</param>
/// <param name="doc">The Inventor document.</param>
private void SaveAsIDW(string filePath, Document doc)
{
LogTrace("Create a new drawing document");
DrawingDocument drawDoc = (DrawingDocument)inventorApplication.Documents.Add(DocumentTypeEnum.kDrawingDocumentObject);
Inventor.Sheet sheet;
LogTrace("Get or create a new drawing sheet");
try
{
if (drawDoc.Sheets.Count > 0)
{
sheet = drawDoc.Sheets[1];
sheet.Size = DrawingSheetSizeEnum.kA2DrawingSheetSize;
}
else
{
sheet = drawDoc.Sheets.Add(DrawingSheetSizeEnum.kA2DrawingSheetSize);
}
TransientGeometry oTG = inventorApplication.TransientGeometry;
Inventor.Point2d pt = oTG.CreatePoint2d(10, 10);
LogTrace("Create a base view");
Inventor.DrawingView dv = sheet.DrawingViews.AddBaseView((_Document)doc, pt, 1, ViewOrientationTypeEnum.kIsoTopLeftViewOrientation, DrawingViewStyleEnum.kShadedDrawingViewStyle, "", null, null);
LogTrace("Change scale of base drawing view");
dv.Scale = CalculateViewSize(sheet, dv);
LogTrace("Create projected view");
Inventor.Point2d pt2 = oTG.CreatePoint2d(dv.Position.X, dv.Position.Y + dv.Height * 1.2);
Inventor.DrawingView projView = sheet.DrawingViews.AddProjectedView(dv, pt2, DrawingViewStyleEnum.kShadedDrawingViewStyle);
Inventor.Point2d pt3 = oTG.CreatePoint2d(sheet.Width - 5, sheet.Height / 3);
LogTrace("Create part list");
Inventor.PartsList pl = sheet.PartsLists.Add(dv, pt3, PartsListLevelEnum.kPartsOnly);
Inventor.Point2d pt4 = oTG.CreatePoint2d(sheet.Width / 2, sheet.Height / 4);
LogTrace("Create Revision table");
Inventor.RevisionTable rtable = sheet.RevisionTables.Add(pt4);
rtable.ShowTitle = true;
rtable.Title = "Revision Table Test";
rtable.RevisionTableRows[1][1].Text = "Inventor IO";
rtable.RevisionTableRows[1][3].Text = "Test revision table in drawing";
rtable.RevisionTableRows[1][4].Text = "Autodesk";
LogTrace("Done:Create Revision table");
LogTrace($"Saving IDW {filePath}");
drawDoc.SaveAs(filePath, false);
drawDoc.Close();
LogTrace($"Saved IDW as {filePath}");
}
catch (Exception e)
{
drawDoc.Close();
LogError($"Generate IDW fails: {e.Message}");
}
}
// ! Converte IDW to DWG
public static void saveAllAsDwg(string path)
{
// ! Istanza inventor
getIstance();
// ! Tutti gli ipt dentro la folder
// ? oDoc = (PartDocument) iApp.ActiveDocument;
string[] listFiles = System.IO.Directory.GetFiles(@path, "*.idw");
int counter = 0;
// ! Ciclo la lista ipt dentro la folder
foreach (string file in listFiles)
{
counter++;
if (System.IO.Path.GetExtension(file) == ".idw")
{
// ! Apro il documento
DrawingDocument oDoc = (DrawingDocument)iApp.Documents.Open(@file);
bool dxfStatus = saveDwg(path, oDoc);
if (!dxfStatus)
{
Console.WriteLine("dasdsadsdas");
}
oDoc.Close(true);
}
}
}
internal void GenerateDrawings(string templateDrawingPath)
{
TemplateDrawingPath = templateDrawingPath;
if (FirstTime == true && TemplateDrawingPath != null && TemplateDrawingPath != "")
{
string newCopyDrawingName = System.IO.Path.GetFileName(TemplateDrawingPath);
string newFullCopyDrawingName = System.IO.Path.Combine(ModulePath, newCopyDrawingName);
if (!System.IO.File.Exists(newFullCopyDrawingName))
{
DrawingDocument drawingDoc = (DrawingDocument)PersistenceManager.InventorApplication.Documents.Open(TemplateDrawingPath, false);
DocumentDescriptorsEnumerator drawingFileDescriptors = drawingDoc.ReferencedDocumentDescriptors;
//This needs to be fixed. It was written with the assumption that only the template assembly would be in
//the details and be first in the collection of document descriptors. This was a safe assumption when
//I was the only user of this code. Need to iterate through drawingFileDescriptors and match names
//and replace correct references. Possibly can use the "filePathPair" object for name
//matching/reference replacing.
//drawingFileDescriptors[1].ReferencedFileDescriptor.ReplaceReference(topAssemblyNewLocation);
foreach (DocumentDescriptor refDocDescriptor in drawingFileDescriptors)
{
foreach (Tuple <string, string> pathPair in FilePathPair)
{
string newFileNameLower = System.IO.Path.GetFileName(pathPair.Item2);
string drawingReferenceLower = System.IO.Path.GetFileName(refDocDescriptor.FullDocumentName);
string topAssemblyLower = System.IO.Path.GetFileName(ModuleAssemblyPath);
if (topAssemblyLower == drawingReferenceLower)
{
refDocDescriptor.ReferencedFileDescriptor.ReplaceReference(ModuleAssemblyPath);
}
if (newFileNameLower == drawingReferenceLower)
{
refDocDescriptor.ReferencedFileDescriptor.ReplaceReference(pathPair.Item2);
}
}
}
drawingDoc.SaveAs(newFullCopyDrawingName, false);
drawingDoc.Close(true);
if (!UniqueModules.DetailDocumentPaths.Contains(newFullCopyDrawingName))
{
UniqueModules.DetailDocumentPaths.Add(newFullCopyDrawingName);
}
}
}
}
private void DrawDocument(Inventor._Document Document, string TypeOfPart)
{
Inventor.ViewOrientationTypeEnum Orientation = Inventor.ViewOrientationTypeEnum.kDefaultViewOrientation;
Inventor.DrawingDocument DrawingDocument;
Inventor.Sheet Sheet;
Inventor.DrawingView DrawingView;
Inventor.TransientGeometry oTG = mInvApplication.TransientGeometry;
CreateDrawingDocument(out DrawingDocument, out Sheet);
//Inventor.DrawingStandardStyle DrawingStandardStyle;
//DrawingStandardStyle = DrawingDocument.StylesManager.ActiveStandardStyle;
if (TypeOfPart == "SheetMetal")
{
Inventor.NameValueMap BaseViewOptions = (Inventor.NameValueMap)mInvApplication.TransientObjects.CreateNameValueMap();
BaseViewOptions.Add("SheetMetalFoldedModel", false);
DrawingView = AddDocumentBaseView(Document, Sheet, oTG, BaseViewOptions);
}
else if (TypeOfPart == "Plate")
{
CDrawingView CView = new CDrawingView();
Inventor.Camera Camera = null;
Camera = CView.GetDocument(ref Document, ref mInvApplication);
DrawingView = AddDocumentBaseView(Document, Sheet, oTG, Camera);
}
else
{
ViewOrientation(ref Orientation);
DrawingView = AddDocumentBaseView(Document, Sheet, oTG, Orientation);
}
try
{
Inventor.DrawingCurve SelectedCurve = null;
foreach (Inventor.DrawingCurve CurveLine in DrawingView.get_DrawingCurves(null))
{
//Skip Circles
if (CurveLine.StartPoint != null && CurveLine.EndPoint != null)
{
if (WithinTol(CurveLine.StartPoint.Y, CurveLine.EndPoint.Y, 0.001))
{
if (SelectedCurve == null)
{
//This is the first horizontal curve found.
SelectedCurve = CurveLine;
}
else
{
//Check to see if this curve is higher (smaller x value) than the current selected
if (CurveLine.MidPoint.Y < SelectedCurve.MidPoint.X)
{
SelectedCurve = CurveLine;
}
}
}
}
}
//Create geometry intents point for the curve.
Inventor.GeometryIntent oGeomIntent1 = Sheet.CreateGeometryIntent(SelectedCurve, Inventor.PointIntentEnum.kStartPointIntent);
Inventor.GeometryIntent oGeomIntent2 = Sheet.CreateGeometryIntent(SelectedCurve, Inventor.PointIntentEnum.kEndPointIntent);
Inventor.Point2d oDimPos = oTG.CreatePoint2d(SelectedCurve.MidPoint.X - 2, SelectedCurve.MidPoint.Y);
Inventor.GeneralDimensions oGeneralDimensions = Sheet.DrawingDimensions.GeneralDimensions;
Inventor.LinearGeneralDimension oLinearDim;
oLinearDim = oGeneralDimensions.AddLinear(oDimPos, oGeomIntent1, oGeomIntent2, Inventor.DimensionTypeEnum.kAlignedDimensionType, true);
}
catch (Exception)
{
}
mInvApplication.SilentOperation = true;
string partURL = Document.FullFileName;
int NameLength = Document.FullFileName.Length;
string partURLTrimed = partURL.Remove(NameLength - 4);
//DrawingDocument.Save();
DrawingDocument.SaveAs(partURLTrimed + ".idw", false);
DrawingDocument.Close(true);
Document.Close(false);
mInvApplication.SilentOperation = false;
//Sheet.RevisionTables.Add(oTG.CreatePoint2d(Sheet.Width, Sheet.Height)); //1mm div 10//1 row = 4
//Inventor.DimensionStyle dimstyle = DrawingDocument.StylesManager.DimensionStyles[cmbDimStyles.Text];
//Inventor.Layer layer = DrawingDocument.StylesManager.Layers[cmbLayers.Text];
}
private void InternalGenerateDrawings(string templateDrawingPath, string masterDrawingPath)
{
PersistenceManager.InventorApplication.Visible = false;
if (_testMode)
{
if (ModulesList.Count < 3)
{
for (int i = 0; i < ModulesList.Count; i++)
{
ModulesList[i].GenerateDrawings(templateDrawingPath);
}
}
else
{
for (int i = 0; i < 3; i++)
{
ModulesList[i].GenerateDrawings(templateDrawingPath);
}
}
}
else
{
for (int i = 0; i < ModulesList.Count; i++)
{
ModulesList[i].GenerateDrawings(templateDrawingPath);
}
}
if (masterDrawingPath != null && masterDrawingPath != "" && System.IO.File.Exists(masterDrawingPath))
{
//TODO: test extension is .idw
DrawingDocument masterDrawing = (DrawingDocument)PersistenceManager.InventorApplication.Documents.Open(masterDrawingPath, true);
for (int p = 0; p < UniqueModules.DetailDocumentPaths.Count; p++)
{
//Get quantity of this module.
//TODO: Look at changing this. It feels brittle.
int moduleQuantity = UniqueModules.InstanceGeometryMap.Where(q => q.Item2 == p).Count();
DrawingDocument moduleDoc = (DrawingDocument)PersistenceManager.InventorApplication.Documents.Open(UniqueModules.DetailDocumentPaths[p], true);
//Iterate through the collection in case the template detail contains many sheets.
Sheets detailSheets = moduleDoc.Sheets;
for (int q = 0; q < detailSheets.Count; q++)
{
Sheet currentSheet = detailSheets[q + 1];
currentSheet.Activate();
DrawingNotes notes = currentSheet.DrawingNotes;
foreach (DrawingNote note in notes)
{
//This is an idea. Having 'template tags' available to the user that lets them place comments in drawing templates that Dynamo can
//swap out for the desired instance value.
if (note.Text == "<DynamoUnitNumber>")
{
int unitNumber = p + 1;
string moduleLabelNote = String.Format("<StyleOverride FontSize='.6096'>ITEM: {0}</StyleOverride>", unitNumber.ToString());
note.FormattedText = moduleLabelNote;
}
if (note.Text == "<DynamoModuleQuantity>")
{
string moduleCountNote = String.Format("<StyleOverride FontSize='.6096'>QUANTITY: {0}</StyleOverride>", moduleQuantity.ToString());
note.FormattedText = moduleCountNote;
}
}
currentSheet.CopyTo(masterDrawing as _DrawingDocument);
}
moduleDoc.Close(true);
}
masterDrawing.Save2();
masterDrawing.Close(true);
}
PersistenceManager.InventorApplication.Visible = true;
}
public void Close()
{
m_Document.Close();
}
