public void DrawGlyphRun(float baselineOriginX, float baselineOriginY, Graphics.Direct2D.MeasuringMode measuringMode, GlyphRun glyphRun, GlyphRunDescription glyphRunDescription, ClientDrawingEffect clientDrawingEffect)
{
using (PathGeometry pathGeometry = _factory.CreatePathGeometry())
{
using (GeometrySink sink = pathGeometry.Open())
{
glyphRun.FontFace.GetGlyphRunOutline(
glyphRun.EmSize,
glyphRun.GlyphIndices,
glyphRun.GlyphAdvances,
glyphRun.GlyphOffsets,
glyphRun.IsSideways,
glyphRun.BidiLevel != 0,
sink);
sink.Close();
}
CustomGeometrySink customSink = new CustomGeometrySink();
pathGeometry.Stream(customSink);
customSink.Close();
System.Diagnostics.Debug.WriteLine(customSink.ToString());
Matrix3x2 matrix = new Matrix3x2(1, 0, 0, 1, baselineOriginX, baselineOriginY);
using (TransformedGeometry transformedGeometry = _factory.CreateTransformedGeometry(pathGeometry, matrix))
{
_renderTarget.DrawGeometry(_outlineBrush, 5, transformedGeometry);
_renderTarget.FillGeometry(_fillBrush, transformedGeometry);
}
}
}
public Geometry CreateGeometry(Direct2DFactory factory)
{
PathGeometry geometry = factory.CreatePathGeometry();
//using (GeometrySink sink = geometry.Open())
//{
// sink.BeginFigure(Project(this._points[0]), FigureBegin.Hollow);
// for (int index = 1; index < this._points.Length; ++index)
// {
// sink.AddLine(Project(this._points[index]));
// }
// sink.EndFigure(FigureEnd.Open);
// sink.Close();
//}
List <Geometry> list = new List <Geometry>();
//list.Add(geometry);
for (int index = 0; index < _points.Length; ++index)
{
EllipseGeometry ellipse = factory.CreateEllipseGeometry(new Ellipse(Project(_points[index]), 5, 5));
list.Add(ellipse);
}
GeometryGroup group = factory.CreateGeometryGroup(FillMode.Winding, list.ToArray());
return(group);
}
private void CreateGeometries(Direct2DFactory factory)
{
Ellipse circle1 = new Ellipse(75, 75, 50, 50);
this._circleGeometry1 = factory.CreateEllipseGeometry(circle1);
Ellipse circle2 = new Ellipse(125, 75, 50, 50);
this._circleGeometry2 = factory.CreateEllipseGeometry(circle2);
// Union
this._geometryUnion = factory.CreatePathGeometry();
using (GeometrySink sink = this._geometryUnion.Open())
{
this._circleGeometry1.CombineWithGeometry(this._circleGeometry2, CombineMode.Union, Matrix3x2.Identity, 0.25f, sink);
sink.Close();
}
// Intersect
this._geometryIntersect = factory.CreatePathGeometry();
using (GeometrySink sink = this._geometryIntersect.Open())
{
this._circleGeometry1.CombineWithGeometry(this._circleGeometry2, CombineMode.Intersect, Matrix3x2.Identity, 0.25f, sink);
sink.Close();
}
// Xor
this._geometryXor = factory.CreatePathGeometry();
using (GeometrySink sink = this._geometryXor.Open())
{
this._circleGeometry1.CombineWithGeometry(this._circleGeometry2, CombineMode.Xor, Matrix3x2.Identity, 0.25f, sink);
sink.Close();
}
// Exclude
this._geometryExclude = factory.CreatePathGeometry();
using (GeometrySink sink = this._geometryExclude.Open())
{
this._circleGeometry1.CombineWithGeometry(this._circleGeometry2, CombineMode.Exclude, Matrix3x2.Identity, 0.25f, sink);
sink.Close();
}
}
protected override void OnCreateDeviceIndependentResources(Direct2DFactory factory)
{
base.OnCreateDeviceIndependentResources(factory);
this._pathGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._pathGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(new PointF(20, 50), FigureBegin.Filled);
sink.AddLine(new PointF(130, 50));
sink.AddLine(new PointF(20, 130));
sink.AddLine(new PointF(80, 0));
sink.AddLine(new PointF(130, 130));
sink.EndFigure(FigureEnd.Closed);
sink.Close();
}
}
protected override void OnCreateDeviceIndependentResources(Direct2DFactory factory)
{
base.OnCreateDeviceIndependentResources(factory);
this._pathGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._pathGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(new PointF(20, 50), FigureBegin.Filled);
sink.AddLine(new PointF(130, 50));
sink.AddLine(new PointF(20, 130));
sink.AddLine(new PointF(80, 0));
sink.AddLine(new PointF(130, 130));
sink.EndFigure(FigureEnd.Closed);
sink.Close();
}
}
public void DrawGlyphRun(float baselineOriginX, float baselineOriginY, Graphics.Direct2D.MeasuringMode measuringMode, GlyphRun glyphRun, GlyphRunDescription glyphRunDescription, ClientDrawingEffect clientDrawingEffect)
{
using (PathGeometry pathGeometry = _factory.CreatePathGeometry())
{
using (GeometrySink sink = pathGeometry.Open())
{
glyphRun.FontFace.GetGlyphRunOutline(
glyphRun.EmSize,
glyphRun.GlyphIndices,
glyphRun.GlyphAdvances,
glyphRun.GlyphOffsets,
glyphRun.IsSideways,
glyphRun.BidiLevel != 0,
sink);
sink.Close();
}
CustomGeometrySink customSink = new CustomGeometrySink();
pathGeometry.Stream(customSink);
customSink.Close();
System.Diagnostics.Debug.WriteLine(customSink.ToString());
SolidColorBrush brush = null;
if (clientDrawingEffect != null)
{
ColorDrawingEffect drawingEffect = clientDrawingEffect as ColorDrawingEffect;
if (drawingEffect != null)
{
brush = _renderTarget.CreateSolidColorBrush(drawingEffect.Color);
}
}
Matrix3x2 matrix = new Matrix3x2(1, 0, 0, 1, baselineOriginX, baselineOriginY);
using (TransformedGeometry transformedGeometry = _factory.CreateTransformedGeometry(pathGeometry, matrix))
{
_renderTarget.FillGeometry(brush == null ? _defaultBrush : brush, transformedGeometry);
}
if (brush != null)
{
brush.Dispose();
}
}
}
public Geometry CreateGeometry(Direct2DFactory factory)
{
PathGeometry geometry = factory.CreatePathGeometry();
using (GeometrySink sink = geometry.Open())
{
sink.BeginFigure(_points[0], FigureBegin.Hollow);
sink.AddLines(_points);
sink.EndFigure(FigureEnd.Open);
sink.Close();
}
Geometry[] list = new Geometry[_points.Length + 1];
list[0] = geometry;
for (int index = 0; index < _points.Length; ++index)
{
list[index + 1] = factory.CreateEllipseGeometry(new Ellipse(_points[index], 5, 5));
}
GeometryGroup group = factory.CreateGeometryGroup(FillMode.Winding, list);
return(group);
}
public Geometry CreateGeometry(Direct2DFactory factory)
{
PathGeometry geometry = factory.CreatePathGeometry();
using (GeometrySink sink = geometry.Open())
{
sink.BeginFigure(this._points[0], FigureBegin.Hollow);
for (int index = 1; index < this._points.Length; ++index)
{
sink.AddLine(this._points[index]);
}
sink.EndFigure(FigureEnd.Open);
sink.Close();
}
return(geometry);
//List<Geometry> list = new List<Geometry>();
//for (int index = 0; index < this.Count; ++index)
//{
// EllipseGeometry ellipse = factory.CreateEllipseGeometry(new Ellipse(this[index], 5, 5));
// list.Add(ellipse);
//}
//return factory.CreateGeometryGroup(FillMode.Winding, list.ToArray());
}
protected override void OnCreateDeviceIndependentResources(Direct2DFactory factory)
{
base.OnCreateDeviceIndependentResources(factory);
this._leftMountainGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._leftMountainGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(new PointF(346, 255), FigureBegin.Filled);
sink.AddLines(
new PointF[] {
new PointF(267, 177),
new PointF(236, 192),
new PointF(212, 160),
new PointF(156, 255),
new PointF(346, 255)
});
sink.EndFigure(FigureEnd.Closed);
sink.Close();
}
this._rightMountainGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._rightMountainGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(new PointF(575, 263), FigureBegin.Filled);
sink.AddLines(
new PointF[] {
new PointF(481, 146),
new PointF(449, 181),
new PointF(433, 159),
new PointF(401, 214),
new PointF(381, 199),
new PointF(323, 263),
new PointF(575, 263)
});
sink.EndFigure(FigureEnd.Closed);
sink.Close();
}
this._sunGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._sunGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(new PointF(270, 255), FigureBegin.Filled);
sink.AddArc(
new ArcSegment(
new PointF(440, 255), // end point
new SizeF(85, 85),
0.0f, // rotation angle
SweepDirection.Clockwise,
ArcSize.Small));
sink.EndFigure(FigureEnd.Closed);
sink.BeginFigure(new PointF(299, 182), FigureBegin.Hollow);
sink.AddBezier(
new BezierSegment(
new PointF(299, 182),
new PointF(294, 176),
new PointF(285, 178)
));
sink.AddBezier(
new BezierSegment(
new PointF(276, 179),
new PointF(272, 173),
new PointF(272, 173)
));
sink.EndFigure(FigureEnd.Open);
sink.BeginFigure(
new PointF(354, 156),
FigureBegin.Hollow
);
sink.AddBezier(
new BezierSegment(
new PointF(354, 156),
new PointF(358, 149),
new PointF(354, 142)
));
sink.AddBezier(
new BezierSegment(
new PointF(349, 134),
new PointF(354, 127),
new PointF(354, 127)
));
sink.EndFigure(FigureEnd.Open);
sink.BeginFigure(
new PointF(322, 164),
FigureBegin.Hollow
);
sink.AddBezier(
new BezierSegment(
new PointF(322, 164),
new PointF(322, 156),
new PointF(314, 152)
));
sink.AddBezier(
new BezierSegment(
new PointF(306, 149),
new PointF(305, 141),
new PointF(305, 141)
));
sink.EndFigure(FigureEnd.Open);
sink.BeginFigure(
new PointF(385, 164),
FigureBegin.Hollow
);
sink.AddBezier(
new BezierSegment(
new PointF(385, 164),
new PointF(392, 161),
new PointF(394, 152)
));
sink.AddBezier(
new BezierSegment(
new PointF(395, 144),
new PointF(402, 141),
new PointF(402, 142)
));
sink.EndFigure(FigureEnd.Open);
sink.BeginFigure(
new PointF(408, 182),
FigureBegin.Hollow
);
sink.AddBezier(
new BezierSegment(
new PointF(408, 182),
new PointF(416, 184),
new PointF(422, 178)
));
sink.AddBezier(
new BezierSegment(
new PointF(428, 171),
new PointF(435, 173),
new PointF(435, 173)
));
sink.EndFigure(FigureEnd.Open);
sink.Close();
}
this._riverGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._riverGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(
new PointF(183, 392),
FigureBegin.Filled
);
sink.AddBezier(
new BezierSegment(
new PointF(238, 284),
new PointF(472, 345),
new PointF(356, 303)
));
sink.AddBezier(
new BezierSegment(
new PointF(237, 261),
new PointF(333, 256),
new PointF(333, 256)
));
sink.AddBezier(
new BezierSegment(
new PointF(335, 257),
new PointF(241, 261),
new PointF(411, 306)
));
sink.AddBezier(
new BezierSegment(
new PointF(574, 350),
new PointF(288, 324),
new PointF(296, 392)
));
sink.EndFigure(FigureEnd.Open);
sink.Close();
}
}
protected override void OnCreateDeviceIndependentResources(Direct2DFactory factory)
{
base.OnCreateDeviceIndependentResources(factory);
this._leftMountainGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._leftMountainGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(new PointF(346, 255), FigureBegin.Filled);
sink.AddLines(
new PointF[] {
new PointF(267, 177),
new PointF(236, 192),
new PointF(212, 160),
new PointF(156, 255),
new PointF(346, 255)
});
sink.EndFigure(FigureEnd.Closed);
sink.Close();
}
this._rightMountainGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._rightMountainGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(new PointF(575, 263), FigureBegin.Filled);
sink.AddLines(
new PointF[] {
new PointF(481, 146),
new PointF(449, 181),
new PointF(433, 159),
new PointF(401, 214),
new PointF(381, 199),
new PointF(323, 263),
new PointF(575, 263)
});
sink.EndFigure(FigureEnd.Closed);
sink.Close();
}
this._sunGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._sunGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(new PointF(270, 255), FigureBegin.Filled);
sink.AddArc(
new ArcSegment(
new PointF(440, 255), // end point
new SizeF(85, 85),
0.0f, // rotation angle
SweepDirection.Clockwise,
ArcSize.Small));
sink.EndFigure(FigureEnd.Closed);
sink.BeginFigure(new PointF(299, 182), FigureBegin.Hollow);
sink.AddBezier(
new BezierSegment(
new PointF(299, 182),
new PointF(294, 176),
new PointF(285, 178)
));
sink.AddBezier(
new BezierSegment(
new PointF(276, 179),
new PointF(272, 173),
new PointF(272, 173)
));
sink.EndFigure(FigureEnd.Open);
sink.BeginFigure(
new PointF(354, 156),
FigureBegin.Hollow
);
sink.AddBezier(
new BezierSegment(
new PointF(354, 156),
new PointF(358, 149),
new PointF(354, 142)
));
sink.AddBezier(
new BezierSegment(
new PointF(349, 134),
new PointF(354, 127),
new PointF(354, 127)
));
sink.EndFigure(FigureEnd.Open);
sink.BeginFigure(
new PointF(322, 164),
FigureBegin.Hollow
);
sink.AddBezier(
new BezierSegment(
new PointF(322, 164),
new PointF(322, 156),
new PointF(314, 152)
));
sink.AddBezier(
new BezierSegment(
new PointF(306, 149),
new PointF(305, 141),
new PointF(305, 141)
));
sink.EndFigure(FigureEnd.Open);
sink.BeginFigure(
new PointF(385, 164),
FigureBegin.Hollow
);
sink.AddBezier(
new BezierSegment(
new PointF(385, 164),
new PointF(392, 161),
new PointF(394, 152)
));
sink.AddBezier(
new BezierSegment(
new PointF(395, 144),
new PointF(402, 141),
new PointF(402, 142)
));
sink.EndFigure(FigureEnd.Open);
sink.BeginFigure(
new PointF(408, 182),
FigureBegin.Hollow
);
sink.AddBezier(
new BezierSegment(
new PointF(408, 182),
new PointF(416, 184),
new PointF(422, 178)
));
sink.AddBezier(
new BezierSegment(
new PointF(428, 171),
new PointF(435, 173),
new PointF(435, 173)
));
sink.EndFigure(FigureEnd.Open);
sink.Close();
}
this._riverGeometry = factory.CreatePathGeometry();
using (GeometrySink sink = this._riverGeometry.Open())
{
sink.SetFillMode(FillMode.Winding);
sink.BeginFigure(
new PointF(183, 392),
FigureBegin.Filled
);
sink.AddBezier(
new BezierSegment(
new PointF(238, 284),
new PointF(472, 345),
new PointF(356, 303)
));
sink.AddBezier(
new BezierSegment(
new PointF(237, 261),
new PointF(333, 256),
new PointF(333, 256)
));
sink.AddBezier(
new BezierSegment(
new PointF(335, 257),
new PointF(241, 261),
new PointF(411, 306)
));
sink.AddBezier(
new BezierSegment(
new PointF(574, 350),
new PointF(288, 324),
new PointF(296, 392)
));
sink.EndFigure(FigureEnd.Open);
sink.Close();
}
}
private void CreateGeometries(Direct2DFactory factory)
{
Ellipse circle1 = new Ellipse(75, 75, 50, 50);
this._circleGeometry1 = factory.CreateEllipseGeometry(circle1);
Ellipse circle2 = new Ellipse(125, 75, 50, 50);
this._circleGeometry2 = factory.CreateEllipseGeometry(circle2);
// Union
this._geometryUnion = factory.CreatePathGeometry();
using (GeometrySink sink = this._geometryUnion.Open())
{
this._circleGeometry1.CombineWithGeometry(this._circleGeometry2, CombineMode.Union, Matrix3x2.Identity, 0.25f, sink);
sink.Close();
}
// Intersect
this._geometryIntersect = factory.CreatePathGeometry();
using (GeometrySink sink = this._geometryIntersect.Open())
{
this._circleGeometry1.CombineWithGeometry(this._circleGeometry2, CombineMode.Intersect, Matrix3x2.Identity, 0.25f, sink);
sink.Close();
}
// Xor
this._geometryXor = factory.CreatePathGeometry();
using (GeometrySink sink = this._geometryXor.Open())
{
this._circleGeometry1.CombineWithGeometry(this._circleGeometry2, CombineMode.Xor, Matrix3x2.Identity, 0.25f, sink);
sink.Close();
}
// Exclude
this._geometryExclude = factory.CreatePathGeometry();
using (GeometrySink sink = this._geometryExclude.Open())
{
this._circleGeometry1.CombineWithGeometry(this._circleGeometry2, CombineMode.Exclude, Matrix3x2.Identity, 0.25f, sink);
sink.Close();
}
}
