private unsafe int ReadCoreWithCancellation(byte[] buffer, int offset, int count, CancellationToken cancellationToken)
{
DebugAssertReadWriteArgs(buffer, offset, count, _handle);
Debug.Assert(cancellationToken.CanBeCanceled, "ReadCoreNoCancellation should be used if cancellation can't happen");
// Register for a cancellation request. This will throw if cancellation has already been requested,
// and otherwise will write to the cancellation pipe if/when cancellation has been requested.
using (DescriptorCancellationRegistration cancellation = RegisterForCancellation(cancellationToken))
{
bool gotRef = false;
try
{
cancellation.Poll.DangerousAddRef(ref gotRef);
fixed(byte *bufPtr = buffer)
{
// We want to wait for data to be available on either the pipe we want to read from
// or on the cancellation pipe, which would signal a cancellation request.
Interop.Sys.PollEvent *events = stackalloc Interop.Sys.PollEvent[2];
events[0] = new Interop.Sys.PollEvent
{
FileDescriptor = (int)_handle.DangerousGetHandle(),
Events = Interop.Sys.PollEvents.POLLIN
};
events[1] = new Interop.Sys.PollEvent
{
FileDescriptor = (int)cancellation.Poll.DangerousGetHandle(),
Events = Interop.Sys.PollEvents.POLLIN
};
// Some systems (at least OS X) appear to have a race condition in poll with FIFOs where the poll can
// end up not noticing writes of greater than the internal buffer size. Restarting the poll causes it
// to notice. To deal with that, we loop around poll, first starting with a small timeout and backing off
// to a larger one. This ensures we'll at least eventually notice such changes in these corner
// cases, while not adding too much overhead on systems that don't suffer from the problem.
const int InitialMsTimeout = 30, MaxMsTimeout = 2000;
for (int timeout = InitialMsTimeout; ; timeout = Math.Min(timeout * 2, MaxMsTimeout))
{
// Do the poll.
uint signaledFdCount;
Interop.CheckIo(Interop.Sys.Poll(events, 2, timeout, &signaledFdCount));
cancellationToken.ThrowIfCancellationRequested();
if (signaledFdCount != 0)
{
// Our pipe is ready. Break out of the loop to read from it. The fd may have been signaled due to
// POLLIN (data available), POLLHUP (hang-up), POLLERR (some error on the stream), etc... any such
// data will be propagated to us when we do the actual read.
break;
}
}
// Read it.
int result = CheckPipeCall(Interop.Sys.Read(_handle, bufPtr + offset, count));
Debug.Assert(result >= 0 && result <= count, "Expected 0 <= result <= count bytes, got " + result);
// return what we read.
return(result);
}
}
finally
{
if (gotRef)
{
cancellation.Poll.DangerousRelease();
}
}
}
}
private unsafe int ReadCoreWithCancellation(byte[] buffer, int offset, int count, CancellationToken cancellationToken)
{
DebugAssertReadWriteArgs(buffer, offset, count, _handle);
Debug.Assert(cancellationToken.CanBeCanceled, "ReadCoreNoCancellation should be used if cancellation can't happen");
// Register for a cancellation request. This will throw if cancellation has already been requested,
// and otherwise will write to the cancellation pipe if/when cancellation has been requested.
using (DescriptorCancellationRegistration cancellation = RegisterForCancellation(cancellationToken))
{
bool gotRef = false;
try
{
cancellation.Poll.DangerousAddRef(ref gotRef);
fixed(byte *bufPtr = buffer)
{
const int CancellationSentinel = -42;
int rv = (int)SysCall(_handle, (fd, ptr, len, cancellationFd) =>
{
// We want to wait for data to be available on either the pipe we want to read from
// or on the cancellation pipe, which would signal a cancellation request.
Interop.Sys.PollFD *fds = stackalloc Interop.Sys.PollFD[2];
fds[0] = new Interop.Sys.PollFD {
FD = fd, Events = Interop.Sys.PollFlags.POLLIN, REvents = 0
};
fds[1] = new Interop.Sys.PollFD {
FD = (int)cancellationFd, Events = Interop.Sys.PollFlags.POLLIN, REvents = 0
};
// Some systems (at least OS X) appear to have a race condition in poll with FIFOs where the poll can
// end up not noticing writes of greater than the internal buffer size. Restarting the poll causes it
// to notice. To deal with that, we loop around poll, first starting with a small timeout and backing off
// to a larger one. This ensures we'll at least eventually notice such changes in these corner
// cases, while not adding too much overhead on systems that don't suffer from the problem.
const int InitialMsTimeout = 30, MaxMsTimeout = 2000;
for (int timeout = InitialMsTimeout; ; timeout = Math.Min(timeout * 2, MaxMsTimeout))
{
// Do the poll.
int signaledFdCount;
while (Interop.CheckIo(signaledFdCount = Interop.Sys.Poll(fds, 2, timeout)))
{
;
}
if (cancellationToken.IsCancellationRequested)
{
// Cancellation occurred. Bail by returning the cancellation sentinel.
return(CancellationSentinel);
}
else if (signaledFdCount == 0)
{
// Timeout occurred. Loop around to poll again.
continue;
}
else
{
// Our pipe is ready. Break out of the loop to read from it.
Debug.Assert((fds[0].REvents & Interop.Sys.PollFlags.POLLIN) != 0, "Expected revents on read fd to have POLLIN set");
break;
}
}
// Read it.
Debug.Assert((fds[0].REvents & Interop.Sys.PollFlags.POLLIN) != 0);
int result = Interop.Sys.Read(fd, (byte *)ptr, len);
Debug.Assert(result <= len);
return(result);
}, (IntPtr)(bufPtr + offset), count, cancellation.Poll.DangerousGetHandle());
Debug.Assert(rv >= 0 || rv == CancellationSentinel);
// If cancellation was requested, waking up the read, throw.
if (rv == CancellationSentinel)
{
Debug.Assert(cancellationToken.IsCancellationRequested);
throw new OperationCanceledException(cancellationToken);
}
// Otherwise return what we read.
return(rv);
}
}
finally
{
if (gotRef)
{
cancellation.Poll.DangerousRelease();
}
}
}
}
private unsafe int ReadCoreWithCancellation(byte[] buffer, int offset, int count, CancellationToken cancellationToken)
{
DebugAssertReadWriteArgs(buffer, offset, count, _handle);
Debug.Assert(cancellationToken.CanBeCanceled, "ReadCoreNoCancellation should be used if cancellation can't happen");
// Register for a cancellation request. This will throw if cancellation has already been requested,
// and otherwise will write to the cancellation pipe if/when cancellation has been requested.
using (DescriptorCancellationRegistration cancellation = RegisterForCancellation(cancellationToken))
{
bool gotRef = false;
try
{
cancellation.Poll.DangerousAddRef(ref gotRef);
fixed(byte *bufPtr = buffer)
{
const int CancellationSentinel = -42;
int rv = (int)SysCall(_handle, (fd, ptr, len, cancellationFd) =>
{
// Wait for data to be available on either the pipe we want to read from
// or on the cancellation pipe, which would signal a cancellation request.
Interop.libc.pollfd *fds = stackalloc Interop.libc.pollfd[2];
fds[0] = new Interop.libc.pollfd {
fd = fd, events = Interop.libc.PollFlags.POLLIN, revents = 0
};
fds[1] = new Interop.libc.pollfd {
fd = (int)cancellationFd, events = Interop.libc.PollFlags.POLLIN, revents = 0
};
while (Interop.CheckIo(Interop.libc.poll(fds, 2, -1)))
{
;
}
// If we woke up because of a cancellation request, bail.
if ((fds[1].revents & Interop.libc.PollFlags.POLLIN) != 0)
{
return(CancellationSentinel);
}
// Otherwise, we woke up because data is available on the pipe. Read it.
Debug.Assert((fds[0].revents & Interop.libc.PollFlags.POLLIN) != 0);
long result = (long)Interop.libc.read(fd, (byte *)ptr, (IntPtr)len);
Debug.Assert(result <= len);
return(result);
}, (IntPtr)(bufPtr + offset), count, cancellation.Poll.DangerousGetHandle());
Debug.Assert(rv >= 0 || rv == CancellationSentinel);
// If cancellation was requested, waking up the read, throw.
if (rv == CancellationSentinel)
{
Debug.Assert(cancellationToken.IsCancellationRequested);
throw new OperationCanceledException(cancellationToken);
}
// Otherwise return what we read.
return(rv);
}
}
finally
{
if (gotRef)
{
cancellation.Poll.DangerousRelease();
}
}
}
}