static void Main(string[] args)
{
try
{
/*
#region lora
* string SerialPortName = ConfigurationManager.AppSettings["Port"];
* UART = new SimpleSerial(SerialPortName, 57600);
* UART.ReadTimeout = 0;
*
* //UART.ReadBufferSize = 1024;
* //UART.WriteBufferSize = 1024;
* //UART.BaudRate = 38400;
* //UART.DataBits = 8;
* //UART.Parity = Parity.None;
* //UART.StopBits = StopBits.One;
*
* UART.DataReceived += UART_DataReceived;
* Console.WriteLine("57600");
* Console.WriteLine("RN2483 Test");
*
* var reset = Pi.Gpio[BcmPin.Gpio06]; //pin 6
* var reset2 = Pi.Gpio[BcmPin.Gpio06]; //pin 3
#endregion
*/
Pi.Init <BootstrapWiringPi>();
Console.WriteLine(">> Init mqtt");
MqttService mqtt = new MqttService();
DS1307 jam = new DS1307();
TempSensor tempSensor = new TempSensor();
var nowDate = DateTime.Now;
Console.WriteLine("Device Date :" + nowDate);
jam.SetDateAsync(nowDate).GetAwaiter().GetResult();
Console.WriteLine("TGL RTC:" + jam.GetDateAsync().GetAwaiter().GetResult().ToString());
ADS1115_PY analog = new ADS1115_PY();
Relay1 = Pi.Gpio[BcmPin.Gpio06]; //Pi.Gpio.Pin06;
Relay2 = Pi.Gpio[BcmPin.Gpio13]; //Pi.Gpio.Pin13;
Limit1 = Pi.Gpio[BcmPin.Gpio19]; //Pi.Gpio.Pin19;
Limit2 = Pi.Gpio[BcmPin.Gpio26]; //Pi.Gpio.Pin26;
Relay1Status = true;
Relay2Status = true;
WriteDigital(Relay1, Relay1Status);
WriteDigital(Relay2, Relay2Status);
mqtt.CommandReceived += (string Message) =>
{
Task.Run(async() => { await DoAction(Message); });
};
var INTERVAL = int.Parse(ConfigurationManager.AppSettings["Interval"]);
//analog.Start();
/*
* analog.ChannelChanged += (object sender, ChannelReadingDone e) =>
* {
* Console.WriteLine($">> channel {e.Channel} : {e.RawValue}");
* };*/
/*
#region lora
* reset.Write(true);
* reset2.Write(true);
*
* Thread.Sleep(100);
* reset.Write(false);
* reset2.Write(false);
*
* Thread.Sleep(100);
* reset.Write(true);
* reset2.Write(true);
*
* Thread.Sleep(100);
*
* waitForResponse();
*
* sendCmd("sys factoryRESET");
* sendCmd("sys get hweui");
* sendCmd("mac get deveui");
*
* // For TTN
* sendCmd("mac set devaddr AAABBBEE"); // Set own address
* Thread.Sleep(1000);
* sendCmd("mac set appskey 2B7E151628AED2A6ABF7158809CF4F3D");
* Thread.Sleep(1000);
*
* sendCmd("mac set nwkskey 2B7E151628AED2A6ABF7158809CF4F3D");
* Thread.Sleep(1000);
*
* sendCmd("mac set adr off");
* Thread.Sleep(1000);
*
* sendCmd("mac set rx2 3 868400000");//869525000
* Thread.Sleep(1000);
*
* sendCmd("mac join abp");
* sendCmd("mac get status");
* sendCmd("mac get devaddr");
* Thread.Sleep(1000);
#endregion
*/
while (true)
{
/*
* for (int i = 0; i < 4; i++)
* {
* Console.WriteLine($"A{i} = {analog.read_adc(i)}");
* }*/
var sensor = new DeviceData()
{
LimitSwitch1 = ReadDigital(Limit1), LimitSwitch2 = ReadDigital(Limit2), Relay1 = Relay1Status, Relay2 = Relay2Status, TDS1 = analog.read_adc(0),
TDS2 = analog.read_adc(1), Temp = tempSensor.Read()
};
Console.WriteLine(">>------------------>>");
Console.WriteLine($"TDS 1: {sensor.TDS1}");
Console.WriteLine($"TDS 2: {sensor.TDS2}");
Console.WriteLine($"Relay 1: {sensor.Relay1}");
Console.WriteLine($"Relay 2: {sensor.Relay2}");
Console.WriteLine($"Limit 1: {sensor.LimitSwitch1}");
Console.WriteLine($"Limit 2: {sensor.LimitSwitch2}");
Console.WriteLine($"Temp: {sensor.Temp}");
mqtt.PublishMessage(JsonConvert.SerializeObject(sensor));
/*
#region lora
* var jsonStr = JsonConvert.SerializeObject(sensor);
* Debug.Print("kirim :" + jsonStr);
* //PrintToLcd("send count: " + counter);
* sendData(jsonStr);
* Thread.Sleep(INTERVAL);
* byte[] rx_data = new byte[20];
*
* if (UART.BytesToRead > 0)
* {
* var count = UART.Read(rx_data, 0, rx_data.Length);
* if (count > 0)
* {
* Debug.Print("count:" + count);
* var hasil = new string(System.Text.Encoding.UTF8.GetChars(rx_data));
* Debug.Print("read:" + hasil);
*
* //mac_rx 2 AABBCC
* }
* }
#endregion
*/
Thread.Sleep(INTERVAL);
}
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
}
