public static ExtendType ParamToExtendTypeForArc(CircularArc3d arc, double param, ExtendType?coerceExtendType)
{
var startParam = arc.GetParameterOf(arc.StartPoint);
var endParam = arc.GetParameterOf(arc.EndPoint);
var result = ExtendType.None;
// If param is in the middle of startParam and endParam
var val = (param - startParam) * (param - endParam);
if (val.SmallerOrEqual(0.0))
{
result = ExtendType.None;
}
else
{
// If coerce extend type is not null.
if (coerceExtendType != null)
{
result = coerceExtendType.Value;
}
else
{
// Determine which distance is shorter.
if (Math.Abs(param - startParam) >= Math.Abs(param - endParam))
{
result = ExtendType.ExtendEnd;
}
else
{
result = ExtendType.ExtendStart;
}
}
}
return(result);
}
// Arc
public Arc ArcToSpeckle(CircularArc3d arc)
{
var _arc = new Arc(PlaneToSpeckle(arc.GetPlane()), arc.Radius, arc.StartAngle, arc.EndAngle, Math.Abs(arc.EndAngle - arc.StartAngle), ModelUnits);
_arc.startPoint = PointToSpeckle(arc.StartPoint);
_arc.endPoint = PointToSpeckle(arc.EndPoint);
_arc.domain = IntervalToSpeckle(arc.GetInterval());
_arc.length = arc.GetLength(arc.GetParameterOf(arc.StartPoint), arc.GetParameterOf(arc.EndPoint), tolerance);
_arc.bbox = BoxToSpeckle(arc.OrthoBoundBlock);
return(_arc);
}
public static Arc CreateArcFromRadius(this Editor acCurEd, Point3d startPoint, Point3d endPoint, double radius)
{
Arc arc = null;
var ucsMat = acCurEd.CurrentUserCoordinateSystem;
var vNormal = ucsMat.CoordinateSystem3d.Zaxis;
var pStart = startPoint.TransformBy(ucsMat); // Start point in WCS
var pEnd = endPoint.TransformBy(ucsMat); // End point in WCS
// Finding center point of arc.
var circ1 = new CircularArc3d(pStart, vNormal, radius);
var circ2 = new CircularArc3d(pEnd, vNormal, radius);
var pts = circ1.IntersectWith(circ2);
circ1.Dispose();
circ2.Dispose();
try
{
if (pts.Length < 1)
{
return(null);
}
}
catch (Exception)
{
return(null);
}
var pCenter = pts[0];
Vector3d v1 = pStart - pCenter, v2 = pEnd - pCenter;
if (v1.CrossProduct(v2).DotProduct(vNormal) < 0)
{
pCenter = pts[1];
}
var cCirc = new CircularArc3d(pCenter, vNormal, radius);
var parStart = cCirc.GetParameterOf(pStart);
var parEnd = cCirc.GetParameterOf(pEnd);
var parMid = (parStart + parEnd) * 0.5;
var pMid = cCirc.EvaluatePoint(parMid);
cCirc.Dispose();
var cArc = new CircularArc3d(pStart, pMid, pEnd);
var angle =
cArc.ReferenceVector.AngleOnPlane(new Plane(cArc.Center, cArc.Normal));
arc = new Arc(cArc.Center, cArc.Normal, cArc.Radius, cArc.StartAngle + angle, cArc.EndAngle + angle);
cArc.Dispose();
return(arc);
}
public static IEnumerable <IntersectionInfo> IntersectArcs(Arc source, ExtendType?coerceSourceExtendType, Arc target, ExtendType?coerceTargetExtendType)
{
var points = new Point3dCollection();
source.IntersectWith(target, Intersect.ExtendBoth, points, IntPtr.Zero, IntPtr.Zero);
if (points.Count <= 0)
{
return(new IntersectionInfo[0]);
}
// NOTE: Use Arc's GetParameterAtPoint will throw exception if the intersect point is
// on the Arc's extension, but CircularArc3d.GetParameterOf is available, so I convert
// the Arc to CircularArc3d here.
var sourceArc = new CircularArc3d(source.Center, source.Normal, source.Normal.GetPerpendicularVector(),
source.Radius, source.StartAngle, source.EndAngle);
var targetArc = new CircularArc3d(target.Center, target.Normal, target.Normal.GetPerpendicularVector(),
target.Radius, target.StartAngle, target.EndAngle);
var result = new List <IntersectionInfo>();
foreach (Point3d point in points)
{
var sourceParam = sourceArc.GetParameterOf(point);
var sourceExtendType = ParamToExtendTypeForArc(sourceArc, sourceParam, coerceSourceExtendType);
var targetParam = targetArc.GetParameterOf(point);
var targetExtendType = ParamToExtendTypeForArc(targetArc, targetParam, coerceTargetExtendType);
}
return(result);
}
public static IEnumerable <IntersectionInfo> IntersectLineArc(Line line, Arc arc, ExtendType?coerceArcExtendType)
{
var points = new Point3dCollection();
line.IntersectWith(arc, Intersect.ExtendBoth, points, IntPtr.Zero, IntPtr.Zero);
if (points.Count <= 0)
{
return(new IntersectionInfo[0]);
}
// NOTE: Use Line's GetParameterAtPoint will throw exception if the intersect point is
// on the line's extension, but LineSegment3d.GetParameterOf is available, so I convert
// the Line to LineSegment3d here.
var lineSegment = new LineSegment3d(line.StartPoint, line.EndPoint);
var circularArc = new CircularArc3d(arc.Center, arc.Normal, arc.Normal.GetPerpendicularVector(), arc.Radius,
arc.StartAngle, arc.EndAngle);
var result = new List <IntersectionInfo>();
foreach (Point3d point in points)
{
var lineParam = lineSegment.GetParameterOf(point);
var lineExtendType = ParamToExtendTypeForLine(lineParam);
var arcParam = circularArc.GetParameterOf(point);
var arcExtendType = ParamToExtendTypeForArc(circularArc, arcParam, coerceArcExtendType);
result.Add(new IntersectionInfo(lineExtendType, arcExtendType, point));
}
return(result);
}
Coordinate[] GetTessellatedCurveCoordinates(CircularArc3d curve)
{
var coordinateList = new CoordinateList();
if (curve.StartPoint != curve.EndPoint)
{
switch (this.CurveTessellationMethod)
{
case CurveTessellation.None:
coordinateList.Add(this.ReadCoordinate(curve.StartPoint));
coordinateList.Add(this.ReadCoordinate(curve.EndPoint));
break;
case CurveTessellation.Linear:
{
var samplePoints = curve.GetSamplePoints((int)Math.Round(this.CurveTessellationValue));
for (int i = 0; i < samplePoints.Length; i++)
{
Point3d point3D = samplePoints[i].Point;
coordinateList.Add(this.ReadCoordinate(point3D));
}
break;
}
case CurveTessellation.Scaled:
{
double num = curve.GetArea(curve.GetParameterOf(curve.StartPoint), curve.GetParameterOf(curve.EndPoint)) * this.CurveTessellationValue;
double num2 = Math.Acos((curve.Radius - 1.0 / (num / 2.0)) / curve.Radius);
int num3 = (int)Math.Round(6.2831853071795862 / num2);
if (num3 < 8)
{
num3 = 8;
}
if (num3 > 128)
{
num3 = 128;
}
var samplePoints2 = curve.GetSamplePoints(num3);
for (int j = 0; j < samplePoints2.Length; j++)
{
var point3d2 = samplePoints2[j].Point;
coordinateList.Add(this.ReadCoordinate(point3d2));
}
break;
}
}
}
return(coordinateList.ToCoordinateArray());
}
private IntersectionInfo IntersectArcAndCurve(Arc arc, Curve curve, Point3d point, ExtendType?coerceArcExtendType)
{
var points = new Point3dCollection();
arc.IntersectWith(curve, Intersect.ExtendThis, points, IntPtr.Zero, IntPtr.Zero);
if (points.Count <= 0)
{
return(null);
}
// Get the nearest point
var nearsetPoint = points[0];
var dist = (point - nearsetPoint).LengthSqrd;
for (int i = 1; i < points.Count; i++)
{
var newDist = (points[i] - point).LengthSqrd;
if (newDist < dist)
{
nearsetPoint = points[i];
dist = newDist;
}
}
// Calculate extend type
if (coerceArcExtendType == null)
{
var circularArc = new CircularArc3d(arc.Center, arc.Normal, arc.Normal.GetPerpendicularVector(), arc.Radius,
arc.StartAngle, arc.EndAngle);
var arcParam = circularArc.GetParameterOf(nearsetPoint);
coerceArcExtendType = CurveIntersectUtils.ParamToExtendTypeForArc(circularArc, arcParam, null);
}
var result = new IntersectionInfo(coerceArcExtendType.Value, ExtendType.None, nearsetPoint);
return(result);
}
void HatchPerimeter(ObjectId entId)
{
Document activeDoc = Application.DocumentManager.MdiActiveDocument;
Database db = activeDoc.Database;
Editor ed = activeDoc.Editor;
using (Transaction tr = db.TransactionManager.StartTransaction())
{
Hatch hatch = tr.GetObject(entId, OpenMode.ForRead) as Hatch;
int nLoops = hatch.NumberOfLoops;
double totalExternalPerimeter = 0.0;
double totalInternalPerimeter = 0.0;
for (int i = 0; i < nLoops; i++)
{
double loopLength = 0.0;
HatchLoopTypes hlt = hatch.LoopTypeAt(i);
HatchLoop hatchLoop = hatch.GetLoopAt(i);
if ((hatch.LoopTypeAt(i) & HatchLoopTypes.Polyline) == HatchLoopTypes.Polyline)
{
BulgeVertexCollection bulges = hatchLoop.Polyline;
int nVertices = bulges.Count;
Polyline testPoly = new Polyline(nVertices);
for (int vx = 0; vx < bulges.Count; vx++)
{
BulgeVertex bv = bulges[vx];
testPoly.AddVertexAt(vx, bv.Vertex, bv.Bulge, 1.0, 1.0);
}
LineSegment3d ls = new LineSegment3d();
CircularArc3d cs = new CircularArc3d();
double d = 0.0, p1 = 0.0, p2 = 1.0;
for (int ver = 0; ver < nVertices - 1; ver++)
{
d = testPoly.GetBulgeAt(ver);
if (d <= 1e-5)
{
ls = testPoly.GetLineSegmentAt(ver);
loopLength += ls.Length;
}
else
{
Point2d v1 = new Point2d(bulges[ver].Vertex.X, bulges[ver].Vertex.Y);
Point2d v2 = new Point2d(bulges[ver + 1].Vertex.X, bulges[ver + 1].Vertex.Y);
if (v1.IsEqualTo(v2) == false)
{
cs = testPoly.GetArcSegmentAt(ver);
p1 = cs.GetParameterOf(cs.StartPoint);
p2 = cs.GetParameterOf(cs.EndPoint);
loopLength += cs.GetLength
(p1, p2, Tolerance.Global.EqualPoint);
}
}
}
}
else
{
Curve2dCollection curves = hatchLoop.Curves;
if (curves != null)
{
foreach (Curve2d curve in curves)
{
if (hatchLoop.LoopType == HatchLoopTypes.External)
{
totalExternalPerimeter += curve.GetLength(0.0, 1.0);
}
else
{
totalInternalPerimeter += curve.GetLength(0.0, 1.0);
}
}
}
}
if (nLoops > 1 &&
((hlt & HatchLoopTypes.External) != HatchLoopTypes.External))
{
totalInternalPerimeter += loopLength;
}
else
{
totalExternalPerimeter += loopLength;
}
}
ed.WriteMessage(string.Format("\nExternal Perimeter : {0}", totalExternalPerimeter));
ed.WriteMessage(string.Format("\nInternal Perimeter : {0}", totalInternalPerimeter));
tr.Commit();
}
}