private void buttonOpenTask_Click(object sender, EventArgs e)
{
#region (註解)檢查是否有選擇組裝方式
/*
* if (SeleOperValue == "001")
* {
* if (check001HasBillet.Checked == false && check001NoBillet.Checked == false)
* {
* MessageBox.Show("請選擇一種組裝方式");
* return;
* }
* if (check001HasBillet.Checked == true && check001NoBillet.Checked == false)
* {
* if (label001.Text == "")
* {
* MessageBox.Show("請選擇一個零件當作胚料檔，或勾選無胚料檔");
* return;
* }
* }
* }
* else if (SeleOperValue == "900")
* {
*
* }
* else
* {
* if (checkWHasBillet.Checked == false && checkWNoBillet.Checked == false)
* {
* MessageBox.Show("請選擇一種組裝方式");
* return;
* }
* if (checkWHasBillet.Checked == true && checkWHasBillet.Checked == false)
* {
* if (labelW.Text == "")
* {
* MessageBox.Show("請選擇一個前段工序檔當作此工序零件檔，或勾選無前段工序檔");
* return;
* }
* }
* }
*/
#endregion
if (SelePartName == "")
{
MessageBox.Show("請選擇欲開啟的零件！");
return;
}
string Local_CAMPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetLocalTaskDir(),
comboBoxCus.Text,
comboBoxPartNo.Text,
comboBoxCusVer.Text,
comboBoxOpVer.Text,
SelePartName);
//組件存在，直接開啟任務組立
BasePart newAsmPart;
status = CaxPart.OpenBaseDisplay(Local_CAMPartFullPath, out newAsmPart);
if (!status)
{
CaxLog.ShowListingWindow("組立開啟失敗！");
return;
}
/*
* //判斷組件是否曾經被開啟。如已被開啟過，則開啟檔案後離開；反之則塞上屬性(Title=IsOpend，Value=Y)並組裝客戶零件與胚料零件
* string checkIsOpened = "";
* try
* {
* checkIsOpened = newAsmPart.GetStringAttribute("ISOPENED");
* if (checkIsOpened == "Y")
* {
* CaxPart.Save();
* this.Close();
* return;
* }
* }
* catch (System.Exception ex)
* {
* newAsmPart.SetAttribute("ISOPENED", "Y");
* }
*
* NXOpen.Assemblies.Component newComponent = null;
*
#region 組裝客戶檔案
*
* string Local_NewModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(),
* CurrentCusName,
* CurrentPartNo,
* CurrentCusVer,
* CurrentPartNo + ".prt");
* //判斷是否已經有客戶檔案，如果沒有則複製過來
* if (!System.IO.File.Exists(Local_NewModelPartFullPath))
* {
* File.Copy(Local_ModelPartFullPath, Local_NewModelPartFullPath, true);
* }
*
* status = CaxAsm.AddComponentToAsmByDefault(Local_NewModelPartFullPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("ERROR,組裝失敗！");
* return;
* }
*
#endregion
*
* CaxAsm.SetWorkComponent(null);
*
#region 建立三階製程檔
*
* string Local_CurrentOperPartFullPath = "";
* if (groupBox001.Enabled == true)
* {
* if (check001NoBillet.Checked == true)
* {
* //選擇無胚料檔--新建檔案(檔名：料號_TE_製程序)
* Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_TE_" + SeleOperValue + ".prt");
* if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
* {
* status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("建立二階製程檔失敗");
* return;
* }
* }
* }
* else
* {
* //選擇有胚料檔--組裝胚料檔(檔名：胚料檔原始名稱)
* Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, label001.Text);
* if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
* {
* status = CaxAsm.AddComponentToAsmByDefault(Local_CurrentOperPartFullPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("001胚料檔組裝失敗");
* return;
* }
* }
* }
* }
* else if (groupBox900.Enabled == true)
* {
* }
* else
* {
#region W階
* //組立"前段製程檔"
* if (checkWHasBillet.Checked == true & System.IO.File.Exists(labelWBilletPath))
* {
* //複製檔案到任務資料夾
* string tempBilletPath = labelWBilletPath;
* tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath));
* File.Copy(labelWBilletPath, tempBilletPath, true);
*
* status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("W階胚料檔組裝失敗");
* return;
* }
* }
*
* //選擇無前段製程檔案--新建檔案(檔名：料號_TE_製程序)
* Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_TE_" + SeleOperValue + ".prt");
* if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
* {
* status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("建立三階製程檔失敗");
* return;
* }
* }
#endregion
* }
*
#endregion
*/
CaxPart.Save();
this.Close();
}
private void buttonOpenTask_Click(object sender, EventArgs e)
{
#region 檢查是否有選擇組裝方式
if (SeleOperValue == "001")
{
if (check001HasBillet.Checked == false && check001NoBillet.Checked == false)
{
MessageBox.Show("請選擇一種組裝方式");
return;
}
if (check001HasBillet.Checked == true && check001NoBillet.Checked == false)
{
if (label001.Text == "")
{
MessageBox.Show("請選擇一個零件當作胚料檔，或勾選無胚料檔");
return;
}
}
}
else if (SeleOperValue == "900")
{
}
else
{
if (checkWHasBillet.Checked == false && checkWNoBillet.Checked == false)
{
MessageBox.Show("請選擇一種組裝方式");
return;
}
if (checkWHasBillet.Checked == true && checkWHasBillet.Checked == false)
{
if (labelW.Text == "")
{
MessageBox.Show("請選擇一個前段工序檔當作此工序零件檔，或勾選無前段工序檔");
return;
}
}
}
#endregion
string Local_CAMPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(),
CurrentCusName,
CurrentPartNo,
CurrentCusVer,
SelePartName);
string Local_ModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetLocalTaskDir(),
CurrentCusName,
CurrentPartNo,
CurrentCusVer,
"MODEL",
CurrentPartNo + ".prt");
string Local_ShareStrPartFullPath = string.Format(@"{0}\{1}\{2}\{3}", CaxEnv.GetLocalTaskDir(),
CurrentCusName,
CurrentPartNo,
CurrentCusVer);
//組件存在，直接開啟任務組立
BasePart newAsmPart;
status = CaxPart.OpenBaseDisplay(Local_CAMPartFullPath, out newAsmPart);
if (!status)
{
CaxLog.ShowListingWindow("組立開啟失敗！");
return;
}
//判斷組件是否曾經被開啟。如已被開啟過，則開啟檔案後離開；反之則塞上屬性(Title=IsOpend，Value=Y)並組裝客戶零件與胚料零件
string checkIsOpened = "";
try
{
checkIsOpened = newAsmPart.GetStringAttribute("IsOpened");
if (checkIsOpened == "Y")
{
CaxPart.Save();
this.Close();
return;
}
}
catch (System.Exception ex)
{
newAsmPart.SetAttribute("IsOpened", "Y");
}
NXOpen.Assemblies.Component newComponent = null;
#region 組裝客戶檔案
string Local_NewModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(),
CurrentCusName,
CurrentPartNo,
CurrentCusVer,
CurrentPartNo + ".prt");
//判斷是否已經有客戶檔案，如果沒有則複製過來
if (!System.IO.File.Exists(Local_NewModelPartFullPath))
{
File.Copy(Local_ModelPartFullPath, Local_NewModelPartFullPath, true);
}
status = CaxAsm.AddComponentToAsmByDefault(Local_NewModelPartFullPath, out newComponent);
if (!status)
{
CaxLog.ShowListingWindow("ERROR,組裝失敗！");
return;
}
#endregion
CaxAsm.SetWorkComponent(null);
#region 建立二階製程檔
string Local_CurrentOperPartFullPath = "";
if (groupBox001.Enabled == true)
{
if (check001NoBillet.Checked == true)
{
//選擇無胚料檔--新建檔案(檔名：料號+製程序)
Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_TE_" + SeleOperValue + ".prt");
if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
{
status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent);
if (!status)
{
CaxLog.ShowListingWindow("建立二階製程檔失敗");
return;
}
}
}
else
{
//選擇有胚料檔--組裝胚料檔(檔名：胚料檔原始名稱)
Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, label001.Text);
if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
{
status = CaxAsm.AddComponentToAsmByDefault(Local_CurrentOperPartFullPath, out newComponent);
if (!status)
{
CaxLog.ShowListingWindow("001胚料檔組裝失敗");
return;
}
}
}
}
else if (groupBox900.Enabled == true)
{
}
else
{
if (checkWNoBillet.Checked == true)
{
//選擇無胚料檔--新建檔案(檔名：料號+製程序)
Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_TE_" + SeleOperValue + ".prt");
if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
{
status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent);
if (!status)
{
CaxLog.ShowListingWindow("建立二階製程檔失敗");
return;
}
}
}
else
{
//選擇有胚料檔--組裝胚料檔(檔名：胚料檔原始名稱)
Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, labelW.Text);
if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
{
status = CaxAsm.AddComponentToAsmByDefault(Local_CurrentOperPartFullPath, out newComponent);
if (!status)
{
CaxLog.ShowListingWindow("W階胚料檔組裝失敗");
return;
}
}
}
}
#endregion
CaxPart.Save();
this.Close();
}
private void OK_Click(object sender, EventArgs e)
{
CaxPart.SaveAll();
//Part上傳
List <string> ListPartName = new List <string>();
status = CaxMEUpLoad.UploadPart(DicPartDirData, out ListPartName);
//status = Function.UploadPart(DicPartDirData, out ListPartName);
if (!status)
{
this.Close();
return;
}
System.IO.File.WriteAllLines(string.Format(@"{0}\{1}\{2}", sDownUpLoadDat.Server_ShareStr, "OP" + cCaxMEUpLoad.OpNum, "PartNameText_OIS.txt"), ListPartName.ToArray());
//新增TE的下載文件
if (TEDownloadText.Count > 0)
{
string PartNameText_CAM = string.Format(@"{0}\{1}\{2}", sDownUpLoadDat.Server_ShareStr, "OP" + cCaxMEUpLoad.OpNum, "PartNameText_CAM.txt");
foreach (string i in TEDownloadText)
{
using (StreamWriter sw = File.AppendText(PartNameText_CAM))
{
sw.WriteLine(i);
}
}
}
#region (註解)Excel上傳
/*
* //Excel上傳
* if (File.Exists(sExcelDirData.ExcelIPQCLocalDir))
* {
* try
* {
* File.Copy(sExcelDirData.ExcelIPQCLocalDir, sExcelDirData.ExcelIPQCServerDir, true);
* }
* catch (System.Exception ex)
* {
* CaxLog.ShowListingWindow("IPQC.xls上傳失敗");
* this.Close();
* }
* }
*
* if (File.Exists(sExcelDirData.ExcelSelfCheckLocalDir))
* {
* try
* {
* File.Copy(sExcelDirData.ExcelSelfCheckLocalDir, sExcelDirData.ExcelSelfCheckServerDir, true);
* }
* catch (System.Exception ex)
* {
* CaxLog.ShowListingWindow("SelfCheck.xls上傳失敗");
* this.Close();
* }
* }
*
* if (File.Exists(sExcelDirData.ExcelIQCLocalDir))
* {
* try
* {
* File.Copy(sExcelDirData.ExcelIQCLocalDir, sExcelDirData.ExcelIQCServerDir, true);
* }
* catch (System.Exception ex)
* {
* CaxLog.ShowListingWindow("IQC.xls上傳失敗");
* this.Close();
* }
* }
*
* if (File.Exists(sExcelDirData.ExcelFAILocalDir))
* {
* try
* {
* File.Copy(sExcelDirData.ExcelFAILocalDir, sExcelDirData.ExcelFAIServerDir, true);
* }
* catch (System.Exception ex)
* {
* CaxLog.ShowListingWindow("FAI.xls上傳失敗");
* this.Close();
* }
* }
*
* if (File.Exists(sExcelDirData.ExcelFQCLocalDir))
* {
* try
* {
* File.Copy(sExcelDirData.ExcelFQCLocalDir, sExcelDirData.ExcelFQCServerDir, true);
* }
* catch (System.Exception ex)
* {
* CaxLog.ShowListingWindow("FQC.xls上傳失敗");
* this.Close();
* }
* }
*/
#endregion
int SheetCount = 0;
NXOpen.Tag[] SheetTagAry = null;
theUfSession.Draw.AskDrawings(out SheetCount, out SheetTagAry);
List <NXOpen.Drawings.DrawingSheet> listDrawingSheet = new List <NXOpen.Drawings.DrawingSheet>();
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
listDrawingSheet.Add(CurrentSheet);
}
#region 輸出OIS
//輸出PDF
if (ExportPFD.Checked == true)
{
//建立PFD資料夾
string PFDFullPath = string.Format(@"{0}\{1}", sDownUpLoadDat.Local_Folder_OIS, cCaxMEUpLoad.PartName + "_OIS" + cCaxMEUpLoad.OpNum + ".pdf");
CaxME.CreateOISPDF(listDrawingSheet, PFDFullPath);
//OIS資料夾上傳
status = CaxPublic.DirectoryCopy(sDownUpLoadDat.Local_Folder_OIS, sDownUpLoadDat.Server_Folder_OIS, true);
if (!status)
{
MessageBox.Show("OIS資料夾複製失敗，請聯繫開發工程師");
this.Close();
}
}
#endregion
#region 資料上傳至Database
//取得WorkPart資訊並檢查資料是否完整
DadDimension.WorkPartAttribute sWorkPartAttribute = new DadDimension.WorkPartAttribute();
//status = Function.GetWorkPartAttribute(workPart, out sWorkPartAttribute);
status = DadDimension.GetWorkPartAttribute(workPart, out sWorkPartAttribute);
if (!status)
{
MessageBox.Show("量測資訊不足，僅上傳CAD檔案，上傳完成！");
this.Close();
return;
}
#region 取得所有量測尺寸資料
/*
* //取得泡泡特徵，並記錄總共有幾個泡泡，後續比對數量用
* IdSymbolCollection BallonCollection = workPart.Annotations.IdSymbols;
* IdSymbol[] BallonAry = BallonCollection.ToArray();
* int balloonCount = 0;
* foreach (IdSymbol i in BallonAry)
* {
* try
* {
* i.GetStringAttribute("BalloonAtt");
* balloonCount++;
* }
* catch (System.Exception ex)
* {
* continue;
* }
* }
*
* List<CaxME.DimensionData> listDimensionData = new List<CaxME.DimensionData>();
* List<int> listBalloonCount = new List<int>();
* NXOpen.Drawings.DrawingSheet FirstSheet = null;
* while (listBalloonCount.Count != balloonCount)
* {
* for (int i = 0; i < SheetCount; i++)
* {
* //打開Sheet並記錄所有OBJ
* NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
* if (CurrentSheet.Name == "S1")
* {
* FirstSheet = CurrentSheet;
* }
* CurrentSheet.Open();
* CurrentSheet.View.UpdateDisplay();
* DisplayableObject[] SheetObj = CurrentSheet.View.AskVisibleObjects();
* status = CaxME.RecordDimension(SheetObj, sWorkPartAttribute, ref listDimensionData);
* if (!status)
* {
* this.Close();
* return;
* }
* }
* foreach (CaxME.DimensionData i in listDimensionData)
* {
* if (!listBalloonCount.Contains(i.ballonNum))
* {
* listBalloonCount.Add(i.ballonNum);
* }
* }
*
* }
*/
//List<CaxME.DimensionData> listDimensionData = new List<CaxME.DimensionData>();
List <DadDimension> listDimensionData = new List <DadDimension>();
NXOpen.Drawings.DrawingSheet FirstSheet = null;
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
if (CurrentSheet.Name == "S1")
{
FirstSheet = CurrentSheet;
}
CurrentSheet.Open();
CurrentSheet.View.UpdateDisplay();
DisplayableObject[] SheetObj = CurrentSheet.View.AskVisibleObjects();
status = Com_Dimension.RecordDimension(SheetObj, sWorkPartAttribute, ref listDimensionData);
if (!status)
{
this.Close();
return;
}
}
#endregion
//切回首頁
if (FirstSheet != null)
{
FirstSheet.Open();
}
//由料號查Com_PEMain
Com_PEMain cCom_PEMain = new Com_PEMain();
status = CaxSQL.GetCom_PEMain(cCaxMEUpLoad.CusName, cCaxMEUpLoad.PartName, cCaxMEUpLoad.CusRev, cCaxMEUpLoad.OpRev, out cCom_PEMain);
if (!status)
{
return;
}
//由Com_PEMain和Op查Com_PartOperation
Com_PartOperation cCom_PartOperation = new Com_PartOperation();
status = CaxSQL.GetCom_PartOperation(cCom_PEMain, cCaxMEUpLoad.OpNum, out cCom_PartOperation);
if (!status)
{
return;
}
#region (註解)由excelType查meExcelSrNo
//Sys_MEExcel sysMEExcel = new Sys_MEExcel();
//try
//{
// sysMEExcel = session.QueryOver<Sys_MEExcel>().Where(x => x.meExcelType == meExcelType).SingleOrDefault<Sys_MEExcel>();
//}
//catch (System.Exception ex)
//{
// MessageBox.Show("資料庫中沒有此料號的紀錄，故無法上傳量測尺寸，僅成功上傳實體檔案");
// return;
//}
#endregion
#region 比對資料庫MEMain是否有同筆數據
IList <Com_MEMain> ListCom_MEMain = new List <Com_MEMain>();
CaxSQL.GetListCom_MEMain(out ListCom_MEMain);
bool Is_Exist = false;
Com_MEMain currentComMEMain = new Com_MEMain();
foreach (Com_MEMain i in ListCom_MEMain)
{
if (i.comPartOperation == cCom_PartOperation)
{
Is_Exist = true;
currentComMEMain = i;
break;
}
}
#endregion
#region 如果本次上傳的資料不存在於資料庫，則開始上傳資料；如果已存在資料庫，則詢問是否要更新尺寸
bool Is_Update = true;
if (Is_Exist)
{
if (eTaskDialogResult.Yes == CaxPublic.ShowMsgYesNo("此料號已存在上一次的標註尺寸資料，是否更新?"))
{
#region 刪除Com_Dimension資料表
IList <Com_Dimension> ListCom_Dimension = new List <Com_Dimension>();
CaxSQL.GetListCom_Dimension(currentComMEMain, out ListCom_Dimension);
foreach (Com_Dimension i in ListCom_Dimension)
{
CaxSQL.Delete <Com_Dimension>(i);
}
#endregion
#region 刪除Com_MEMain資料表
Com_MEMain cCom_MEMain = new Com_MEMain();
CaxSQL.GetCom_MEMain(cCom_PartOperation, out cCom_MEMain);
CaxSQL.Delete <Com_MEMain>(cCom_MEMain);
#endregion
}
else
{
Is_Update = false;
}
}
if (Is_Update)
{
#region 整理資料並上傳
try
{
Com_MEMain cCom_MEMain = new Com_MEMain();
cCom_MEMain.comPartOperation = cCom_PartOperation;
//cCom_MEMain.sysMEExcel = sysMEExcel;
cCom_MEMain.partDescription = sWorkPartAttribute.partDescription;
cCom_MEMain.createDate = sWorkPartAttribute.createDate;
cCom_MEMain.material = sWorkPartAttribute.material;
cCom_MEMain.draftingVer = sWorkPartAttribute.draftingVer;
IList <Com_Dimension> listCom_Dimension = new List <Com_Dimension>();
foreach (DadDimension i in listDimensionData)
{
Com_Dimension cCom_Dimension = new Com_Dimension();
cCom_Dimension.MappingData(i);
cCom_Dimension.comMEMain = cCom_MEMain;
listCom_Dimension.Add(cCom_Dimension);
//Com_Dimension cCom_Dimension = new Com_Dimension();
//cCom_Dimension.comMEMain = cCom_MEMain;
//CaxME.MappingData(i, ref cCom_Dimension);
//listCom_Dimension.Add(cCom_Dimension);
}
cCom_MEMain.comDimension = listCom_Dimension;
CaxSQL.Save <Com_MEMain>(cCom_MEMain);
}
catch (System.Exception ex)
{
MessageBox.Show("上傳資料庫時發生錯誤，僅上傳實體檔案");
}
#endregion
}
#endregion
#endregion
CaxPart.Save();
MessageBox.Show("上傳完成！");
this.Close();
}
private void buttonOpenTask_Click(object sender, EventArgs e)
{
#region (註解)檢查是否有選擇組裝方式
//if (SeleOperValue == "001.prt")
//{
// if (check001HasBillet.Checked == false && check001NoBillet.Checked == false)
// {
// MessageBox.Show("請選擇一種組裝方式");
// return;
// }
// if (check001HasBillet.Checked == true && check001NoBillet.Checked == false)
// {
// if (label001.Text == "")
// {
// MessageBox.Show("請選擇一個零件當作胚料檔，或勾選無胚料檔");
// return;
// }
// }
//}
//else if (SeleOperValue == "900.prt")
//{
//}
//else
//{
// if (checkWHasBillet.Checked == false && checkWNoBillet.Checked == false)
// {
// MessageBox.Show("請選擇一種組裝方式");
// return;
// }
// if (checkWHasBillet.Checked == true && checkWNoBillet.Checked == false)
// {
// if (labelW.Text == "")
// {
// MessageBox.Show("請選擇一個前段工序檔當作此工序零件檔，或勾選無前段工序檔");
// return;
// }
// }
//}
#endregion
if (SelePartName == "")
{
MessageBox.Show("請選擇欲開啟的零件！");
return;
}
string Local_OISPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetLocalTaskDir(),
comboBoxCus.Text,
comboBoxPartNo.Text,
comboBoxCusVer.Text,
comboBoxOpVer.Text,
SelePartName);
//string Local_ModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}\{6}", CaxEnv.GetLocalTaskDir(),
// CurrentCusName,
// CurrentPartNo,
// CurrentCusVer,
// CurrentOpVer,
// "MODEL",
// CurrentPartNo + ".prt");
//string Local_ShareStrPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(),
// CurrentCusName,
// CurrentPartNo,
// CurrentCusVer,
// CurrentOpVer);
BasePart newAsmPart;
status = CaxPart.OpenBaseDisplay(Local_OISPartFullPath, out newAsmPart);
if (!status)
{
CaxLog.ShowListingWindow("組立開啟失敗！");
return;
}
/*
* if (check001HasBillet.Checked == true || check001NoBillet.Checked == true ||
* checkWHasBillet.Checked == true || checkWNoBillet.Checked == true)
* {
#region 組裝客戶檔案
* NXOpen.Assemblies.Component newComponent = null;
* string Local_NewModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetLocalTaskDir(),
* CurrentCusName,
* CurrentPartNo,
* CurrentCusVer,
* CurrentOpVer,
* CurrentPartNo + ".prt");
* //判斷是否已經有客戶檔案，如果沒有則複製過來
* if (!System.IO.File.Exists(Local_NewModelPartFullPath))
* {
* File.Copy(Local_ModelPartFullPath, Local_NewModelPartFullPath, true);
* }
*
* status = CaxAsm.AddComponentToAsmByDefault(Local_NewModelPartFullPath, out newComponent);
* if (!status)
* {
* MessageBox.Show("客戶檔案組裝失敗！");
* this.Close();
* return;
* }
#endregion
*
* CaxAsm.SetWorkComponent(null);
*
#region 建立三階製程檔
*
* string Local_CurrentOperPartFullPath = "";
* if (groupBox001.Enabled == true)
* {
#region 001
* //組立"胚料檔"
* if (check001HasBillet.Checked == true & System.IO.File.Exists(label001BilletPath))
* {
* //複製檔案到任務資料夾
* string tempBilletPath = label001BilletPath;
* tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath));
* File.Copy(label001BilletPath, tempBilletPath, true);
*
* status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("001胚料檔組裝失敗");
* return;
* }
* }
*
* //組立"料號_ME_OISxxx"
* Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_ME_" + SeleOperValue);
*
* if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
* {
* status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("建立三階製程檔失敗");
* return;
* }
* }
#endregion
* }
* else if (groupBox900.Enabled == true)
* {
* }
* else
* {
#region W階
* //組立"前段製程檔"
* if (checkWHasBillet.Checked == true & System.IO.File.Exists(labelWBilletPath))
* {
* //複製檔案到任務資料夾
* string tempBilletPath = labelWBilletPath;
* tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath));
* File.Copy(labelWBilletPath, tempBilletPath, true);
*
* status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("W階胚料檔組裝失敗");
* return;
* }
* }
*
* //組立"料號_ME_OISxxx"
* Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_ME_" + SeleOperValue);
* if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
* {
* status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent);
* if (!status)
* {
* CaxLog.ShowListingWindow("建立三階製程檔失敗");
* return;
* }
* }
#endregion
* }
*
#endregion
* }
*/
//組件存在，直接開啟任務組立
//BasePart newAsmPart;
//status = CaxPart.OpenBaseDisplay(Local_OISPartFullPath, out newAsmPart);
//if (!status)
//{
// CaxLog.ShowListingWindow("組立開啟失敗！");
// return;
//}
//判斷組件是否曾經被開啟。如已被開啟過，則開啟檔案後離開；反之則塞上屬性(Title=IsOpend，Value=Y)並組裝客戶零件與胚料零件
//string checkIsOpened = "";
//try
//{
// checkIsOpened = newAsmPart.GetStringAttribute("IsOpened");
// if (checkIsOpened == "Y")
// {
// CaxPart.Save();
// this.Close();
// return;
// }
//}
//catch (System.Exception ex)
//{
// newAsmPart.SetAttribute("IsOpened", "Y");
//}
//NXOpen.Assemblies.Component newComponent = null;
#region (註解中)組裝客戶檔案
//string Local_NewModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(),
// CurrentCusName,
// CurrentPartNo,
// CurrentCusVer,
// CurrentPartNo + ".prt");
//判斷是否已經有客戶檔案，如果沒有則複製過來
//if (!System.IO.File.Exists(Local_NewModelPartFullPath))
//{
// File.Copy(Local_ModelPartFullPath, Local_NewModelPartFullPath, true);
//}
//status = CaxAsm.AddComponentToAsmByDefault(Local_NewModelPartFullPath, out newComponent);
//if (!status)
//{
// CaxLog.ShowListingWindow("ERROR,組裝失敗！");
// this.Close();
// return;
//}
#endregion
//CaxAsm.SetWorkComponent(null);
#region (註解中)建立三階製程檔
//string Local_CurrentOperPartFullPath = "";
//if (groupBox001.Enabled == true)
//{
// #region 001
// //組立"胚料檔"
// if (check001HasBillet.Checked == true & System.IO.File.Exists(label001BilletPath))
// {
// //複製檔案到任務資料夾
// string tempBilletPath = label001BilletPath;
// tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath));
// File.Copy(label001BilletPath, tempBilletPath, true);
// status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent);
// if (!status)
// {
// CaxLog.ShowListingWindow("001胚料檔組裝失敗");
// return;
// }
// }
// //組立"料號_ME_OISxxx"
// Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_ME_" + SeleOperValue);
// if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
// {
// status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent);
// if (!status)
// {
// CaxLog.ShowListingWindow("建立三階製程檔失敗");
// return;
// }
// }
// #endregion
//}
//else if (groupBox900.Enabled == true)
//{
//}
//else
//{
// #region W階
// //組立"前段製程檔"
// if (checkWHasBillet.Checked == true & System.IO.File.Exists(labelWBilletPath))
// {
// //複製檔案到任務資料夾
// string tempBilletPath = labelWBilletPath;
// tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath));
// File.Copy(labelWBilletPath, tempBilletPath, true);
// status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent);
// if (!status)
// {
// CaxLog.ShowListingWindow("W階胚料檔組裝失敗");
// return;
// }
// }
// //組立"料號_ME_OISxxx"
// Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_ME_" + SeleOperValue);
// if (!System.IO.File.Exists(Local_CurrentOperPartFullPath))
// {
// status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent);
// if (!status)
// {
// CaxLog.ShowListingWindow("建立三階製程檔失敗");
// return;
// }
// }
// #endregion
//}
#endregion
CaxPart.Save();
this.Close();
}
private void OK_Click(object sender, EventArgs e)
{
//先關閉所有檔案
CaxPart.CloseAllParts();
try
{
if (Is_OldPart == true)
{
//定義總組立檔案、二階檔案、三階檔案名稱
string AsmCompFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_MOT.prt");
string SecondFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OP" + "[Oper1]" + ".prt");
string ThirdFileFullPath_OIS = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OIS" + "[Oper1]" + ".prt");
string ThirdFileFullPath_CAM = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OP" + "[Oper1]" + "_CAM.prt");
string OPFolderPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), "OP" + "[Oper1]");
string tempSecondFileFullPath = SecondFileFullPath;
string tempThirdFileFullPath_OIS = ThirdFileFullPath_OIS;
string tempThirdFileFullPath_CAM = ThirdFileFullPath_CAM;
string tempOPFolderPath = OPFolderPath;
#region 開啟總組立
if (File.Exists(AsmCompFileFullPath))
{
//組件存在，直接開啟任務組立
BasePart newAsmPart;
status = CaxPart.OpenBaseDisplay(AsmCompFileFullPath, out newAsmPart);
if (!status)
{
CaxLog.ShowListingWindow("組立開啟失敗，料號不可有中文字！");
return;
}
}
else
{
CaxLog.ShowListingWindow("開啟失敗：找不到總組立" + Path.GetFileNameWithoutExtension(AsmCompFileFullPath));
return;
}
#endregion
#region 建立新插入的製程
NXOpen.Assemblies.Component tempComp;
foreach (string i in ListAddOper)
{
//設定一階為WorkComp
CaxAsm.SetWorkComponent(null);
//建立二階檔案
SecondFileFullPath = tempSecondFileFullPath;
SecondFileFullPath = SecondFileFullPath.Replace("[Oper1]", i);
status = CaxAsm.CreateNewEmptyComp(SecondFileFullPath, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立二階製程檔失敗");
return;
}
//取得二階所有comp
List <NXOpen.Assemblies.Component> ChildenComp = new List <NXOpen.Assemblies.Component>();
CaxAsm.GetCompChildren(out ChildenComp);
foreach (NXOpen.Assemblies.Component ii in ChildenComp)
{
if (ii.Name == Path.GetFileNameWithoutExtension(SecondFileFullPath).ToUpper())
{
CaxAsm.SetWorkComponent(ii);
}
}
//建立三階檔案
ThirdFileFullPath_OIS = tempThirdFileFullPath_OIS;
ThirdFileFullPath_CAM = tempThirdFileFullPath_CAM;
ThirdFileFullPath_OIS = ThirdFileFullPath_OIS.Replace("[Oper1]", i);
ThirdFileFullPath_CAM = ThirdFileFullPath_CAM.Replace("[Oper1]", i);
status = CaxAsm.CreateNewEmptyComp(ThirdFileFullPath_OIS, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立三階OIS檔失敗");
return;
}
status = CaxAsm.CreateNewEmptyComp(ThirdFileFullPath_CAM, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立三階CAM檔失敗");
return;
}
}
#endregion
#region 建立新插入的製程資料夾
foreach (string i in ListAddOper)
{
OPFolderPath = tempOPFolderPath;
OPFolderPath = OPFolderPath.Replace("[Oper1]", i);
string OISFolderPath = string.Format(@"{0}\{1}", OPFolderPath, "OIS");
string CAMFolderPath = string.Format(@"{0}\{1}", OPFolderPath, "CAM");
if (!File.Exists(OISFolderPath))
{
try
{
System.IO.Directory.CreateDirectory(OISFolderPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
if (!File.Exists(CAMFolderPath))
{
try
{
System.IO.Directory.CreateDirectory(CAMFolderPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
}
#endregion
#region 將值儲存起來
cPECreateData.CusName = comboBoxOldCusName.Text;
cPECreateData.PartNo = comboBoxOldPartNo.Text;
cPECreateData.CusRev = comboBoxOldCusRev.Text.ToUpper();
cPECreateData.ListOperation = new List <Operation>();
Operation cOperation = new Operation();
cPECreateData.Oper1Ary = new List <string>();
cPECreateData.Oper2Ary = new List <string>();
for (int i = 0; i < panel.Rows.Count; i++)
{
if (panel.Rows.Count == 0)
{
MessageBox.Show("尚未選擇製程序與製程別！");
return;
}
if (panel.GetCell(i, 1).Value.ToString() == "")
{
MessageBox.Show("製程序" + panel.GetCell(i, 0).Value + "尚未選取製程別！");
return;
}
cOperation = new Operation();
cOperation.Oper1 = panel.GetCell(i, 0).Value.ToString();
cOperation.Oper2 = panel.GetCell(i, 1).Value.ToString();
cPECreateData.ListOperation.Add(cOperation);
cPECreateData.Oper1Ary.Add(panel.GetCell(i, 0).Value.ToString());
cPECreateData.Oper2Ary.Add(panel.GetCell(i, 1).Value.ToString());
}
#endregion
#region 寫出PECreateData.dat
string PECreateDataJsonDat = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekTaskDir(), CurrentOldCusName, CurrentOldPartNo, CurrentOldCusRev, "MODEL", "PECreateData.dat");
status = CaxFile.WriteJsonFileData(PECreateDataJsonDat, cPECreateData);
if (!status)
{
MessageBox.Show("PECreateData.dat 輸出失敗...");
return;
}
#endregion
}
else
{
#region 取得客戶名稱
CusName = comboBoxCusName.Text;
if (CusName == "")
{
MessageBox.Show("尚未填寫客戶！");
return;
}
#endregion
#region 取得料號
PartNo = textPartNo.Text;
if (PartNo == "")
{
MessageBox.Show("尚未填寫料號！");
return;
}
#endregion
#region 取得客戶版次
CusRev = textCusRev.Text;
if (CusRev == "")
{
MessageBox.Show("尚未填寫客戶版次！");
return;
}
#endregion
#region 取得檔案路徑
if (PartPath == "-1")
{
MessageBox.Show("尚未選擇客戶檔案！");
return;
}
#endregion
#region 定義根目錄
//定義MODEL資料夾路徑
string ModelFolderFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", CusName, PartNo, CusRev.ToUpper(), "MODEL");
//定義總組立檔案名稱
string AsmCompFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", CusName, PartNo, CusRev.ToUpper(), PartNo + "_MOT.prt");
//定義CAM資料夾路徑、OIS資料夾路徑、三階檔案路徑
string CAMFolderPath = "", OISFolderPath = "", ThridOperPartPath = "";
#endregion
#region 建立MODEL資料夾
if (!File.Exists(ModelFolderFullPath))
{
try
{
System.IO.Directory.CreateDirectory(ModelFolderFullPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
#endregion
#region 複製客戶檔案到MODEL資料夾內
//判斷客戶的檔案是否存在
status = System.IO.File.Exists(PartPath);
if (!status)
{
MessageBox.Show("指定的檔案不存在，請再次確認");
return;
}
//建立MODEL資料夾內客戶檔案路徑
string CustomerPartFullPath = string.Format(@"{0}\{1}", ModelFolderFullPath, PartNo + ".prt");
//開始複製
if (!System.IO.File.Exists(CustomerPartFullPath))
{
File.Copy(PartPath, CustomerPartFullPath, true);
}
#endregion
#region 將值儲存起來
cPECreateData.CusName = CusName;
cPECreateData.PartNo = PartNo;
cPECreateData.CusRev = CusRev.ToUpper();
//cPE_OutPutDat.PartPath = PartPath;
cPECreateData.ListOperation = new List <Operation>();
Operation cOperation = new Operation();
cPECreateData.Oper1Ary = new List <string>();
cPECreateData.Oper2Ary = new List <string>();
for (int i = 0; i < panel.Rows.Count; i++)
{
if (panel.Rows.Count == 0)
{
MessageBox.Show("尚未選擇製程序與製程別！");
return;
}
if (panel.GetCell(i, 1).Value.ToString() == "")
{
MessageBox.Show("製程序" + panel.GetCell(i, 0).Value + "尚未選取製程別！");
return;
}
cOperation = new Operation();
cOperation.Oper1 = panel.GetCell(i, 0).Value.ToString();
cOperation.Oper2 = panel.GetCell(i, 1).Value.ToString();
//建立CAM資料夾路徑
CAMFolderPath = string.Format(@"{0}\{1}\{2}", Path.GetDirectoryName(AsmCompFileFullPath), "OP" + panel.GetCell(i, 0).Value.ToString(), "CAM");
//儲存CAM資料夾路徑
//cOperation.CAMFolderPath = CAMFolderPath;
//建立CAM資料夾
if (!File.Exists(CAMFolderPath))
{
try
{
System.IO.Directory.CreateDirectory(CAMFolderPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
//建立OIS資料夾路徑
OISFolderPath = string.Format(@"{0}\{1}\{2}", Path.GetDirectoryName(AsmCompFileFullPath), "OP" + panel.GetCell(i, 0).Value.ToString(), "OIS");
//儲存OIS資料夾路徑
//cOperation.OISFolderPath = OISFolderPath;
//建立OIS資料夾
if (!File.Exists(OISFolderPath))
{
try
{
System.IO.Directory.CreateDirectory(OISFolderPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
//建立三階檔案路徑
ThridOperPartPath = Path.GetDirectoryName(AsmCompFileFullPath);
cPECreateData.ListOperation.Add(cOperation);
cPECreateData.Oper1Ary.Add(panel.GetCell(i, 0).Value.ToString());
cPECreateData.Oper2Ary.Add(panel.GetCell(i, 1).Value.ToString());
}
#endregion
#region (註解中)複製MODEL內的客戶檔案到料號資料夾內，並更名XXX_MOT.prt
/*
* //判斷要複製的檔案是否存在
* status = System.IO.File.Exists(destFileName_Model);
* if (!status)
* {
* MessageBox.Show("指定的檔案不存在，請再次確認");
* return;
* }
*
* //建立目的地(客戶版次)檔案全路徑
* string destFileName_CusRev = string.Format(@"{0}\{1}\{2}\{3}", CaxEnv.GetGlobalTekEnvDir(), PartNo, CusRev.ToUpper(), PartNo + "_MOT.prt");
*
* //開始複製
* File.Copy(destFileName_Model, destFileName_CusRev, true);
*/
#endregion
#region 自動建立總組立檔案架構，並組立相關製程
status = CaxAsm.CreateNewAsm(AsmCompFileFullPath);
if (!status)
{
CaxLog.ShowListingWindow("建立一階總組立檔失敗");
return;
}
CaxPart.Save();
string OPCompName = "";
NXOpen.Assemblies.Component tempComp;
//List<double> ListOperDouble = new List<double>();
//for (int i = 0; i < cPE_OutPutDat.ListOperation.Count; i++)
//{
// ListOperDouble.Add(Convert.ToDouble(cPE_OutPutDat.ListOperation[i].Oper1));
//}
//ListOperDouble.Sort();
for (int i = 0; i < cPECreateData.ListOperation.Count; i++)
{
//設定一階為WorkComp
CaxAsm.SetWorkComponent(null);
//建立二階製程檔
OPCompName = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OP" + cPECreateData.ListOperation[i].Oper1 + ".prt");
status = CaxAsm.CreateNewEmptyComp(OPCompName, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立二階製程檔失敗");
return;
}
}
string OISCompFullPath = "", CAMCompFullPath = "";
//取得二階所有comp
List <NXOpen.Assemblies.Component> ChildenComp = new List <NXOpen.Assemblies.Component>();
CaxAsm.GetCompChildren(out ChildenComp);
for (int i = 0; i < ChildenComp.Count; i++)
{
CaxAsm.SetWorkComponent(ChildenComp[i]);
string OperStr = ChildenComp[i].Name.Split(new string[] { "OP" }, StringSplitOptions.RemoveEmptyEntries)[1];
#region 建立三階CAM檔
//建立三階CAM檔
CAMCompFullPath = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OP" + OperStr + "_CAM.prt");
status = CaxAsm.CreateNewEmptyComp(CAMCompFullPath, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立三階CAM檔失敗");
return;
}
#endregion
#region 建立三階OIS檔
//先複製drafting_template.prt到OIS檔
string drafting_template_Path = string.Format(@"{0}\{1}", CaxEnv.GetGlobaltekEnvDir(), "drafting_template.prt");
OISCompFullPath = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OIS" + OperStr + ".prt");
if (!File.Exists(drafting_template_Path))
{
CaxLog.ShowListingWindow("drafting_template.prt遺失，請聯繫開發工程師");
return;
}
System.IO.File.Copy(drafting_template_Path, OISCompFullPath, true);
//組立三階OIS檔
//status = CaxAsm.CreateNewEmptyComp(OISCompFullPath, out tempComp);
status = CaxAsm.AddComponentToAsmByDefault(OISCompFullPath, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("組立三階OIS檔失敗");
return;
}
#endregion
}
#endregion
#region 寫出PECreateData.dat
string PECreateDataJsonDat = string.Format(@"{0}\{1}", ModelFolderFullPath, "PECreateData.dat");
status = CaxFile.WriteJsonFileData(PECreateDataJsonDat, cPECreateData);
if (!status)
{
MessageBox.Show("PECreateData.dat 輸出失敗...");
return;
}
#endregion
#region (註解中)寫出METEDownloadData.dat
//string METEDownloadData = string.Format(@"{0}\{1}", CaxEnv.GetGlobaltekTaskDir(), "METEDownloadData.dat");
//METEDownloadData cMETEDownloadData = new METEDownloadData();
//if (File.Exists(METEDownloadData))
//{
// #region METEDownloadData.dat檔案存在
// status = CaxPublic.ReadMETEDownloadData(METEDownloadData, out cMETEDownloadData);
// if (!status)
// {
// MessageBox.Show("METEDownloadData.dat讀取失敗...");
// return;
// }
// int CusCount = 0, IndexOfCusName = -1;
// for (int i = 0; i < cMETEDownloadData.EntirePartAry.Count; i++)
// {
// if (CusName != cMETEDownloadData.EntirePartAry[i].CusName)
// {
// CusCount++;
// }
// else
// {
// IndexOfCusName = i;
// break;
// }
// }
// //新的客戶且已經有METEDownloadDat.dat
// if (CusCount == cMETEDownloadData.EntirePartAry.Count)
// {
// EntirePartAry cEntirePartAry = new EntirePartAry();
// cEntirePartAry.CusName = CusName;
// cEntirePartAry.CusPart = new List<CusPart>();
// CusPart cCusPart = new CusPart();
// cCusPart.PartNo = PartNo;
// cCusPart.CusRev = new List<CusRev>();
// CusRev cCusRev = new CusRev();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.OperAry2 = new List<string>();
// cCusRev.OperAry1 = cPECreateData.Oper1Ary;
// cCusRev.OperAry2 = cPECreateData.Oper2Ary;
// cCusPart.CusRev.Add(cCusRev);
// cEntirePartAry.CusPart.Add(cCusPart);
// cMETEDownloadData.EntirePartAry.Add(cEntirePartAry);
// }
// //舊的客戶新增料號
// else
// {
// //判斷料號是否已存在
// int PartCount = 0; int IndexOfPartNo = -1;
// for (int i = 0; i < cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Count; i++)
// {
// if (PartNo != cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart[i].PartNo)
// {
// PartCount++;
// }
// else
// {
// IndexOfPartNo = i;
// break;
// }
// }
// //舊的客戶且新的料號 PartCount == CusPart.Count 表示新的料號
// if (PartCount == cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Count)
// {
// CusPart cCusPart = new CusPart();
// cCusPart.PartNo = PartNo;
// cCusPart.CusRev = new List<CusRev>();
// CusRev cCusRev = new CusRev();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.OperAry2 = new List<string>();
// cCusRev.OperAry1 = cPECreateData.Oper1Ary;
// cCusRev.OperAry2 = cPECreateData.Oper2Ary;
// cCusPart.CusRev.Add(cCusRev);
// cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Add(cCusPart);
// }
// //舊的客戶且舊的料號新增客戶版次
// else
// {
// CusRev cCusRev = new CusRev();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.OperAry1 = cPECreateData.Oper1Ary;
// cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart[IndexOfPartNo].CusRev.Add(cCusRev);
// }
// }
// /*
// int PartCount = 0; int IndexOfPartNo = -1;
// for (int i = 0; i < cMETEDownloadData.EntirePartAry.Count; i++)
// {
// if (PartNo != cMETEDownloadData.EntirePartAry[i].PartNo)
// {
// PartCount++;
// }
// else
// {
// IndexOfPartNo = i;
// break;
// }
// }
// //新的料號且已經有METEDownloadDat.dat
// if (PartCount == cMETEDownloadData.EntirePartAry.Count)
// {
// EntirePartAry cEntirePartAry = new EntirePartAry();
// cEntirePartAry.CusRev = new List<CusRev>();
// CusRev cCusRev = new CusRev();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = cPE_OutPutDat.Oper1Ary;
// cEntirePartAry.CusName = CusName;
// cEntirePartAry.PartNo = PartNo;
// cEntirePartAry.CusRev.Add(cCusRev);
// cMETEDownloadData.EntirePartAry.Add(cEntirePartAry);
// }
// //舊的料號新增客戶版次
// else
// {
// CusRev cCusRev = new CusRev();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = cPE_OutPutDat.Oper1Ary;
// cMETEDownloadData.EntirePartAry[IndexOfPartNo].CusRev.Add(cCusRev);
// }
// */
// #endregion
//}
//else
//{
// #region METEDownloadData.dat檔案不存在
// cMETEDownloadData.EntirePartAry = new List<EntirePartAry>();
// EntirePartAry cEntirePartAry = new EntirePartAry();
// cEntirePartAry.CusName = CusName;
// cEntirePartAry.CusPart = new List<CusPart>();
// CusPart cCusPart = new CusPart();
// cCusPart.PartNo = PartNo;
// cCusPart.CusRev = new List<CusRev>();
// CusRev cCusRev = new CusRev();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.OperAry2 = new List<string>();
// cCusRev.OperAry1 = cPECreateData.Oper1Ary;
// cCusRev.OperAry2 = cPECreateData.Oper2Ary;
// cCusPart.CusRev.Add(cCusRev);
// cEntirePartAry.CusPart.Add(cCusPart);
// cMETEDownloadData.EntirePartAry.Add(cEntirePartAry);
// #endregion
//}
//status = CaxFile.WriteJsonFileData(METEDownloadData, cMETEDownloadData);
//if (!status)
//{
// MessageBox.Show("METEDownloadData.dat輸出失敗...");
// return;
//}
#endregion
}
CaxAsm.SetWorkComponent(null);
CaxPart.Save();
this.DialogResult = DialogResult.OK;
this.Close();
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow(ex.ToString());
}
}