public FrmCMODI555(Drawing drawing, ModuleTree tree) : this()
{
objCMODI555 = (CMODI555)objCMODI555Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
if (objCMODI555 == null)
{
return;
}
this.Text = drawing.ODPNo + " / Item: " + drawing.Item + " / Module: " + tree.Module + " - " + tree.CategoryName;
Category objCategory = objCategoryService.GetCategoryByCategoryId(tree.CategoryId.ToString());
pbModelImage.Image = objCategory.ModelImage.Length == 0
? Image.FromFile("NoPic.png")
: (Image) new SerializeObjectToString().DeserializeObject(objCategory.ModelImage);
FillData();
}
/// <summary>
/// 根据条件查找CMODI555
/// </summary>
/// <param name="whereSql"></param>
/// <returns></returns>
public IModel GetModelByWhereSql(string whereSql)
{
string sql =
"select CMODI555Id,ModuleTreeId,Length,Deepth,ExRightDis,ExNo,EXDis,ExLength,ExWidth,ExHeight,SidePanel," +
"Outlet,Inlet,LEDlogo,BackToBack,LEDSpotNo,LEDSpotDis,LightType," +
"ANSUL,ANSide,ANDetectorEnd,ANYDis,ANDropNo,ANDropDis1,ANDropDis2,ANDropDis3,ANDropDis4,ANDropDis5," +
"ANDetectorNo,ANDetectorDis1,ANDetectorDis2,ANDetectorDis3,ANDetectorDis4,ANDetectorDis5," +
"MARVEL,IRNo,IRDis1,IRDis2,IRDis3 from CMODI555";
sql += whereSql;
SqlDataReader objReader = SQLHelper.GetReader(sql);
CMODI555 objModel = null;
if (objReader.Read())
{
objModel = new CMODI555()
{
CMODI555Id = Convert.ToInt32(objReader["CMODI555Id"]),
ModuleTreeId = Convert.ToInt32(objReader["ModuleTreeId"]),
//最好不要用=null去判断，提示类型转换错误
Length = objReader["Length"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["Length"]),
Deepth = objReader["Deepth"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["Deepth"]),
ExRightDis = objReader["ExRightDis"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExRightDis"]),
ExNo = objReader["ExNo"].ToString().Length == 0 ? 0 : Convert.ToInt32(objReader["ExNo"]),
ExDis = objReader["ExDis"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExDis"]),
ExLength = objReader["ExLength"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExLength"]),
ExWidth = objReader["ExWidth"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExWidth"]),
ExHeight = objReader["ExHeight"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExHeight"]),
SidePanel = objReader["SidePanel"].ToString().Length == 0 ? "" : objReader["SidePanel"].ToString(),
Outlet = objReader["Outlet"].ToString().Length == 0 ? "" : objReader["Outlet"].ToString(),
Inlet = objReader["Inlet"].ToString().Length == 0 ? "" : objReader["Inlet"].ToString(),
LEDlogo = objReader["LEDlogo"].ToString().Length == 0 ? "" : objReader["LEDlogo"].ToString(),
BackToBack = objReader["BackToBack"].ToString().Length == 0 ? "" : objReader["BackToBack"].ToString(),
LEDSpotNo = objReader["LEDSpotNo"].ToString().Length == 0 ? 0 : Convert.ToInt32(objReader["LEDSpotNo"]),
LEDSpotDis = objReader["LEDSpotDis"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["LEDSpotDis"]),
LightType = objReader["LightType"].ToString().Length == 0 ? "" : objReader["LightType"].ToString(),
ANSUL = objReader["ANSUL"].ToString().Length == 0 ? "" : objReader["ANSUL"].ToString(),
ANSide = objReader["ANSide"].ToString().Length == 0 ? "" : objReader["ANSide"].ToString(),
ANDetectorEnd = objReader["ANDetectorEnd"].ToString().Length == 0 ? "" : objReader["ANDetectorEnd"].ToString(),
ANYDis = objReader["ANYDis"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANYDis"]),
ANDropNo = objReader["ANDropNo"].ToString().Length == 0 ? 0 : Convert.ToInt32(objReader["ANDropNo"]),
ANDropDis1 = objReader["ANDropDis1"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDropDis1"]),
ANDropDis2 = objReader["ANDropDis2"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDropDis2"]),
ANDropDis3 = objReader["ANDropDis3"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDropDis3"]),
ANDropDis4 = objReader["ANDropDis4"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDropDis4"]),
ANDropDis5 = objReader["ANDropDis5"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDropDis5"]),
ANDetectorNo = objReader["ANDetectorNo"].ToString().Length == 0 ? 0 : Convert.ToInt32(objReader["ANDetectorNo"]),
ANDetectorDis1 = objReader["ANDetectorDis1"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDetectorDis1"]),
ANDetectorDis2 = objReader["ANDetectorDis2"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDetectorDis2"]),
ANDetectorDis3 = objReader["ANDetectorDis3"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDetectorDis3"]),
ANDetectorDis4 = objReader["ANDetectorDis4"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDetectorDis4"]),
ANDetectorDis5 = objReader["ANDetectorDis5"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ANDetectorDis5"]),
MARVEL = objReader["MARVEL"].ToString().Length == 0 ? "" : objReader["MARVEL"].ToString(),
IRNo = objReader["IRNo"].ToString().Length == 0 ? 0 : Convert.ToInt32(objReader["IRNo"]),
IRDis1 = objReader["IRDis1"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["IRDis1"]),
IRDis2 = objReader["IRDis2"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["IRDis2"]),
IRDis3 = objReader["IRDis3"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["IRDis3"])
};
}
objReader.Close();
return(objModel);
}
/// <summary>
/// 修改CMODI555的制图参数
/// </summary>
/// <param name="models"></param>
/// <returns></returns>
public int EditModel(IModel models)
{
CMODI555 objModel = (CMODI555)models;
//编写带参数的SQL语句
StringBuilder sqlBuilder = new StringBuilder();
sqlBuilder.Append("Update CMODI555 set Length=@Length,Deepth=@Deepth,ExRightDis=@ExRightDis,ExNo=@ExNo,ExDis=@ExDis,ExLength=@ExLength,ExWidth=@ExWidth,ExHeight=@ExHeight,SidePanel=@SidePanel,");
sqlBuilder.Append("Outlet=@Outlet,Inlet=@Inlet,LEDlogo=@LEDlogo,BackToBack=@BackToBack,LEDSpotNo=@LEDSpotNo,LEDSpotDis=@LEDSpotDis,LightType=@LightType,");
sqlBuilder.Append("ANSUL=@ANSUL,ANSide=@ANSide,ANDetectorEnd=@ANDetectorEnd,ANYDis=@ANYDis,ANDropNo=@ANDropNo,ANDropDis1=@ANDropDis1,ANDropDis2=@ANDropDis2,ANDropDis3=@ANDropDis3,ANDropDis4=@ANDropDis4,ANDropDis5=@ANDropDis5,");
sqlBuilder.Append("ANDetectorNo=@ANDetectorNo,ANDetectorDis1=@ANDetectorDis1,ANDetectorDis2=@ANDetectorDis2,ANDetectorDis3=@ANDetectorDis3,ANDetectorDis4=@ANDetectorDis4,ANDetectorDis5=@ANDetectorDis5,");
sqlBuilder.Append("MARVEL=@MARVEL,IRNo=@IRNo,IRDis1=@IRDis1,IRDis2=@IRDis2,IRDis3=@IRDis3 where CMODI555Id=@CMODI555Id");
//定义参数数组
SqlParameter[] param = new SqlParameter[]
{
new SqlParameter("@Length", objModel.Length),
new SqlParameter("@Deepth", objModel.Deepth),
new SqlParameter("@ExRightDis", objModel.ExRightDis),
new SqlParameter("@ExNo", objModel.ExNo),
new SqlParameter("@ExDis", objModel.ExDis),
new SqlParameter("@ExLength", objModel.ExLength),
new SqlParameter("@ExWidth", objModel.ExWidth),
new SqlParameter("@ExHeight", objModel.ExHeight),
new SqlParameter("@SidePanel", objModel.SidePanel),
new SqlParameter("@Outlet", objModel.Outlet),
new SqlParameter("@Inlet", objModel.Inlet),
new SqlParameter("@LEDlogo", objModel.LEDlogo),
new SqlParameter("@BackToBack", objModel.BackToBack),
new SqlParameter("@LEDSpotNo", objModel.LEDSpotNo),
new SqlParameter("@LEDSpotDis", objModel.LEDSpotDis),
new SqlParameter("@LightType", objModel.LightType),
new SqlParameter("@ANSUL", objModel.ANSUL),
new SqlParameter("@ANSide", objModel.ANSide),
new SqlParameter("@ANDetectorEnd", objModel.ANDetectorEnd),
new SqlParameter("@ANYDis", objModel.ANYDis),
new SqlParameter("@ANDropNo", objModel.ANDropNo),
new SqlParameter("@ANDropDis1", objModel.ANDropDis1),
new SqlParameter("@ANDropDis2", objModel.ANDropDis2),
new SqlParameter("@ANDropDis3", objModel.ANDropDis3),
new SqlParameter("@ANDropDis4", objModel.ANDropDis4),
new SqlParameter("@ANDropDis5", objModel.ANDropDis5),
new SqlParameter("@ANDetectorNo", objModel.ANDetectorNo),
new SqlParameter("@ANDetectorDis1", objModel.ANDetectorDis1),
new SqlParameter("@ANDetectorDis2", objModel.ANDetectorDis2),
new SqlParameter("@ANDetectorDis3", objModel.ANDetectorDis3),
new SqlParameter("@ANDetectorDis4", objModel.ANDetectorDis4),
new SqlParameter("@ANDetectorDis5", objModel.ANDetectorDis5),
new SqlParameter("@MARVEL", objModel.MARVEL),
new SqlParameter("@IRNo", objModel.IRNo),
new SqlParameter("@IRDis1", objModel.IRDis1),
new SqlParameter("@IRDis2", objModel.IRDis2),
new SqlParameter("@IRDis3", objModel.IRDis3),
new SqlParameter("@CMODI555Id", objModel.CMODI555Id)
};
try
{
return(SQLHelper.Update(sqlBuilder.ToString(), param));
}
catch (SqlException ex)
{
throw new Exception("数据库操作出现异常：" + ex.Message);
}
catch (Exception ex)
{
throw ex;
}
}
/// <summary>
/// 修改参数
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnEditData_Click(object sender, EventArgs e)
{
#region 数据验证
//必填项目
if (pbModelImage.Tag.ToString().Length == 0)
{
return;
}
if (!DataValidate.IsDecimal(txtLength.Text.Trim()) || Convert.ToDecimal(txtLength.Text.Trim()) < 500m)
{
MessageBox.Show("请认真检查烟罩长度", "提示信息");
txtLength.Focus();
txtLength.SelectAll();
return;
}
if (!DataValidate.IsDecimal(txtDeepth.Text.Trim()) || Convert.ToDecimal(txtDeepth.Text.Trim()) < 500m)
{
MessageBox.Show("请认真检查烟罩深度", "提示信息");
txtDeepth.Focus();
txtDeepth.SelectAll();
return;
}
if (cobSidePanel.SelectedIndex == -1)
{
MessageBox.Show("请选择烟罩大侧板", "提示信息");
cobSidePanel.Focus();
return;
}
if (cobExNo.SelectedIndex == -1)
{
MessageBox.Show("请选择排风脖颈数量", "提示信息");
cobExNo.Focus();
return;
}
else if (cobExNo.SelectedIndex > 0 && (!DataValidate.IsDecimal(txtExDis.Text.Trim()) || Convert.ToDecimal(txtExDis.Text.Trim()) < 40m))
{
MessageBox.Show("请认真检查排风脖颈间距", "提示信息");//当脖颈大于2时需要填写脖颈间距
txtExDis.Focus();
txtExDis.SelectAll();
return;
}
if (!DataValidate.IsDecimal(txtExLength.Text.Trim()) || Convert.ToDecimal(txtExLength.Text.Trim()) < 50m)
{
MessageBox.Show("请填写脖颈长度", "提示信息");
txtExLength.Focus();
txtExLength.SelectAll();
return;
}
if (!DataValidate.IsDecimal(txtExWidth.Text.Trim()) || Convert.ToDecimal(txtExWidth.Text.Trim()) < 50m)
{
MessageBox.Show("请填写脖颈宽度", "提示信息");
txtExWidth.Focus();
txtExWidth.SelectAll();
return;
}
if (!DataValidate.IsDecimal(txtExHeight.Text.Trim()) || Convert.ToDecimal(txtExHeight.Text.Trim()) < 20m)
{
MessageBox.Show("请填写脖颈高度", "提示信息");
txtExHeight.Focus();
txtExHeight.SelectAll();
return;
}
if (cobLightType.SelectedIndex == -1)
{
MessageBox.Show("请选择灯具类型", "提示信息");
cobLightType.Focus();
return;
}
if (cobANSUL.SelectedIndex == -1)
{
MessageBox.Show("是否带ANSUL", "提示信息");
cobANSUL.Focus();
return;
}
if (cobMARVEL.SelectedIndex == -1)
{
MessageBox.Show("是否带MARVEL", "提示信息");
cobMARVEL.Focus();
return;
}
if (cobLightType.SelectedIndex == 2 || cobLightType.SelectedIndex == 3)
{
if (cobLEDSpotNo.SelectedIndex == -1)
{
MessageBox.Show("请检查筒灯数量", "提示信息");
cobLEDSpotNo.Focus();
return;
}
if (!DataValidate.IsDecimal(txtLEDSpotDis.Text.Trim()) || Convert.ToDecimal(txtLEDSpotDis.Text.Trim()) < 60m)
{
MessageBox.Show("请填写筒灯间距", "提示信息");
txtLEDSpotDis.Focus();
txtLEDSpotDis.SelectAll();
return;
}
}
if (cobANSUL.SelectedIndex == 0)
{
if (cobANSide.SelectedIndex == -1)
{
MessageBox.Show("请选择ANSUL侧喷位置", "提示信息");
cobANSide.Focus();
return;
}
if (cobANDetectorEnd.SelectedIndex == -1)
{
MessageBox.Show("请选择ANSUL末端探测器位置", "提示信息");
cobANDetectorEnd.Focus();
return;
}
if (cobANDropNo.SelectedIndex == -1)
{
MessageBox.Show("请检查下喷数量", "提示信息");
cobANDropNo.Focus();
return;
}
if (cobANDropNo.SelectedIndex > 0)
{
if (!DataValidate.IsDecimal(txtANYDis.Text.Trim()) || Convert.ToDecimal(txtANYDis.Text.Trim()) < 200m)
{
MessageBox.Show("请检查ANSUL下喷距离烟罩前端距离", "提示信息");
txtANYDis.Focus();
txtANYDis.SelectAll();
return;
}
if (!DataValidate.IsDecimal(txtANDropDis1.Text.Trim()) || Convert.ToDecimal(txtANDropDis1.Text.Trim()) < 30m)
{
MessageBox.Show("请检查下喷间距1", "提示信息");
txtANDropDis1.Focus();
txtANDropDis1.SelectAll();
return;
}
}
if (cobANDropNo.SelectedIndex > 1)
{
if (!DataValidate.IsDecimal(txtANDropDis2.Text.Trim()) || Convert.ToDecimal(txtANDropDis2.Text.Trim()) < 30m)
{
MessageBox.Show("请检查下喷间距2", "提示信息");
txtANDropDis2.Focus();
txtANDropDis2.SelectAll();
return;
}
}
if (cobANDropNo.SelectedIndex > 2)
{
if (!DataValidate.IsDecimal(txtANDropDis3.Text.Trim()) || Convert.ToDecimal(txtANDropDis3.Text.Trim()) < 30m)
{
MessageBox.Show("请检查下喷间距3", "提示信息");
txtANDropDis3.Focus();
txtANDropDis3.SelectAll();
return;
}
}
if (cobANDropNo.SelectedIndex > 3)
{
if (!DataValidate.IsDecimal(txtANDropDis4.Text.Trim()) || Convert.ToDecimal(txtANDropDis4.Text.Trim()) < 30m)
{
MessageBox.Show("请检查下喷间距4", "提示信息");
txtANDropDis4.Focus();
txtANDropDis4.SelectAll();
return;
}
}
if (cobANDropNo.SelectedIndex > 4)
{
if (!DataValidate.IsDecimal(txtANDropDis5.Text.Trim()) || Convert.ToDecimal(txtANDropDis5.Text.Trim()) < 30m)
{
MessageBox.Show("请检查下喷间距5", "提示信息");
txtANDropDis5.Focus();
txtANDropDis5.SelectAll();
return;
}
}
}
if (cobANDetectorNo.SelectedIndex == -1)
{
MessageBox.Show("请检查探测器数量", "提示信息");
cobANDetectorNo.Focus();
return;
}
if (cobANDetectorNo.SelectedIndex > 0)
{
if (!DataValidate.IsDecimal(txtANDetectorDis1.Text.Trim()) || Convert.ToDecimal(txtANDetectorDis1.Text.Trim()) < 30m)
{
MessageBox.Show("请检查探测器间距1", "提示信息");
txtANDetectorDis1.Focus();
txtANDetectorDis1.SelectAll();
return;
}
}
if (cobANDetectorNo.SelectedIndex > 1)
{
if (!DataValidate.IsDecimal(txtANDetectorDis2.Text.Trim()) || Convert.ToDecimal(txtANDetectorDis2.Text.Trim()) < 30m)
{
MessageBox.Show("请检查探测器间距2", "提示信息");
txtANDetectorDis2.Focus();
txtANDetectorDis2.SelectAll();
return;
}
}
if (cobANDetectorNo.SelectedIndex > 2)
{
if (!DataValidate.IsDecimal(txtANDetectorDis3.Text.Trim()) || Convert.ToDecimal(txtANDetectorDis3.Text.Trim()) < 30m)
{
MessageBox.Show("请检查探测器间距3", "提示信息");
txtANDetectorDis3.Focus();
txtANDetectorDis3.SelectAll();
return;
}
}
if (cobANDetectorNo.SelectedIndex > 3)
{
if (!DataValidate.IsDecimal(txtANDetectorDis4.Text.Trim()) || Convert.ToDecimal(txtANDetectorDis4.Text.Trim()) < 30m)
{
MessageBox.Show("请检查探测器间距4", "提示信息");
txtANDetectorDis4.Focus();
txtANDetectorDis4.SelectAll();
return;
}
}
if (cobANDetectorNo.SelectedIndex > 4)
{
if (!DataValidate.IsDecimal(txtANDetectorDis5.Text.Trim()) || Convert.ToDecimal(txtANDetectorDis5.Text.Trim()) < 30m)
{
MessageBox.Show("请检查探测器间距5", "提示信息");
txtANDetectorDis5.Focus();
txtANDetectorDis5.SelectAll();
return;
}
}
if (cobMARVEL.SelectedIndex == 0)
{
if (cobIRNo.SelectedIndex == -1)
{
MessageBox.Show("请检查IR数量", "提示信息");
cobIRNo.Focus();
return;
}
if (cobIRNo.SelectedIndex > 0)
{
if (!DataValidate.IsDecimal(txtIRDis1.Text.Trim()) || Convert.ToDecimal(txtIRDis1.Text.Trim()) < 30m)
{
MessageBox.Show("请检查IR间距1", "提示信息");
txtIRDis1.Focus();
txtIRDis1.SelectAll();
return;
}
}
if (cobIRNo.SelectedIndex > 1)
{
if (!DataValidate.IsDecimal(txtIRDis2.Text.Trim()) || Convert.ToDecimal(txtIRDis2.Text.Trim()) < 30m)
{
MessageBox.Show("请检查IR间距2", "提示信息");
txtIRDis2.Focus();
txtIRDis2.SelectAll();
return;
}
}
if (cobIRNo.SelectedIndex > 2)
{
if (!DataValidate.IsDecimal(txtIRDis3.Text.Trim()) || Convert.ToDecimal(txtIRDis3.Text.Trim()) < 30m)
{
MessageBox.Show("请检查IR间距3", "提示信息");
txtIRDis3.Focus();
txtIRDis3.SelectAll();
return;
}
}
}
if (cobLEDLogo.SelectedIndex == -1)
{
MessageBox.Show("请检查是否带LOGO", "提示信息");
cobLEDLogo.Focus();
return;
}
if (cobOutlet.SelectedIndex == -1)
{
MessageBox.Show("请检查排水口位置", "提示信息");
cobOutlet.Focus();
return;
}
if (cobInlet.SelectedIndex == -1)
{
MessageBox.Show("请检查入水口位置", "提示信息");
cobInlet.Focus();
return;
}
if (cobBackToBack.SelectedIndex == -1)
{
MessageBox.Show("请检查是否背靠背", "提示信息");
cobBackToBack.Focus();
return;
}
#endregion
//封装对象
CMODI555 objCMODI555 = new CMODI555()
{
CMODI555Id = Convert.ToInt32(pbModelImage.Tag),
SidePanel = cobSidePanel.Text,
ExNo = Convert.ToInt32(cobExNo.Text),
LightType = cobLightType.Text,
LEDSpotNo = cobLEDSpotNo.Text.Trim().Length == 0 ? 0 : Convert.ToInt32(cobLEDSpotNo.Text),
ANSUL = cobANSUL.Text,
ANSide = cobANSide.Text.Trim().Length == 0 ? "NO" : cobANSide.Text,
ANDetectorEnd = cobANDetectorEnd.Text.Trim().Length == 0 ? "NO" : cobANDetectorEnd.Text,
ANDropNo = cobANDropNo.Text.Trim().Length == 0 ? 0 : Convert.ToInt32(cobANDropNo.Text),
ANDetectorNo = cobANDetectorNo.Text.Trim().Length == 0 ? 0 : Convert.ToInt32(cobANDetectorNo.Text),
MARVEL = cobMARVEL.Text,
IRNo = cobIRNo.Text.Trim().Length == 0 ? 0 : Convert.ToInt32(cobIRNo.Text),
LEDlogo = cobLEDLogo.Text,
Outlet = cobOutlet.Text,
Inlet = cobInlet.Text,
BackToBack = cobBackToBack.Text,
Length = Convert.ToDecimal(txtLength.Text.Trim()),
Deepth = Convert.ToDecimal(txtDeepth.Text.Trim()),
ExRightDis = Convert.ToDecimal(txtExRightDis.Text.Trim()),
ExDis = Convert.ToDecimal(txtExDis.Text.Trim()),
ExLength = Convert.ToDecimal(txtExLength.Text.Trim()),
ExWidth = Convert.ToDecimal(txtExWidth.Text.Trim()),
ExHeight = Convert.ToDecimal(txtExHeight.Text.Trim()),
LEDSpotDis = Convert.ToDecimal(txtLEDSpotDis.Text.Trim()),
ANYDis = Convert.ToDecimal(txtANYDis.Text.Trim()),
ANDropDis1 = Convert.ToDecimal(txtANDropDis1.Text.Trim()),
ANDropDis2 = Convert.ToDecimal(txtANDropDis2.Text.Trim()),
ANDropDis3 = Convert.ToDecimal(txtANDropDis3.Text.Trim()),
ANDropDis4 = Convert.ToDecimal(txtANDropDis4.Text.Trim()),
ANDropDis5 = Convert.ToDecimal(txtANDropDis5.Text.Trim()),
ANDetectorDis1 = Convert.ToDecimal(txtANDetectorDis1.Text.Trim()),
ANDetectorDis2 = Convert.ToDecimal(txtANDetectorDis2.Text.Trim()),
ANDetectorDis3 = Convert.ToDecimal(txtANDetectorDis3.Text.Trim()),
ANDetectorDis4 = Convert.ToDecimal(txtANDetectorDis4.Text.Trim()),
ANDetectorDis5 = Convert.ToDecimal(txtANDetectorDis5.Text.Trim()),
IRDis1 = Convert.ToDecimal(txtIRDis1.Text.Trim()),
IRDis2 = Convert.ToDecimal(txtIRDis2.Text.Trim()),
IRDis3 = Convert.ToDecimal(txtIRDis3.Text.Trim())
};
//提交修改
try
{
if (objCMODI555Service.EditModel(objCMODI555) == 1)
{
MessageBox.Show("制图数据修改成功", "提示信息");
this.DialogResult = DialogResult.OK;
this.Close();
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Item + "-" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Item + "-" + tree.Module + "-" +
tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
CMODI555 item = (CMODI555)objCMODI555Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true); //TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
//新风面板卡扣数量及间距
int frontPanelKaKouNo = (int)((item.Length - 300m) / 450m) + 2;
decimal frontPanelKaKouDis = Convert.ToDecimal((item.Length - 300m) / (frontPanelKaKouNo - 1)) / 1000m;
//新风面板螺丝孔数量及间距
int frontPanelHoleNo = (int)((item.Length - 300m) / 900m) + 2;
decimal frontPanelHoleDis = Convert.ToDecimal((item.Length - 300) / (frontPanelHoleNo - 1)) / 1000m;
//新风CJ孔数量和新风CJ孔第一个CJ距离边缘距离
int frontCjNo = (int)((item.Length - 30m) / 32m) + 1;
decimal frontCjFirstDis = Convert.ToDecimal((item.Length - (frontCjNo - 1) * 32m) / 2) / 1000m;
//Midroof灯板螺丝孔数量及第二个孔距离边缘距离,灯板顶面吊装槽钢螺丝孔位距离
int midRoofHoleNo = (int)((item.Length - 300m) / 400m);
decimal midRoofSecondHoleDis = Convert.ToDecimal((item.Length - (midRoofHoleNo - 1) * 400m) / 2) / 1000m;
decimal midRoofTopHoleDis =
Convert.ToDecimal(item.Deepth - 535m - 360m - 90m -
(int)((item.Deepth - 535m - 360m - 90m - 100m) / 50m) * 50m) / 1000m;
//KSA数量，KSA侧板长度(以全长计算)水洗烟罩KSA在三角板内侧，减去3mm
int ksaNo = (int)((item.Length - 2m) / 498m);
decimal ksaSideLength = Convert.ToDecimal((item.Length - 3m - ksaNo * 498m) / 2) / 1000m;
//MESH侧板长度(除去排风三角板3mm计算)
decimal meshSideLength = Convert.ToDecimal((item.Length - 3m - (int)((item.Length - 2m) / 498m) * 498m) / 2) / 1000m;
//侧板CJ孔整列到烟罩底部
int sidePanelDownCjNo = (int)((item.Deepth - 95m) / 32m);
//非水洗烟罩KV/UV
//int sidePanelSideCjNo = (int)((item.Deepth - 305m) / 32m);
//水洗烟罩KW/UW
int sidePanelSideCjNo = (int)((item.Deepth - 380m) / 32m);
try
{
//----------Top Level----------
//烟罩深度
swModel.Parameter("D1@Distance77").SystemValue = item.Deepth / 1000m;
//灯板加强筋
if (item.Deepth > 1649m && ((item.LightType == "FSLONG" && item.Length > 1900m) ||
(item.LightType == "FSSHORT" && item.Length > 1500m) || (item.Length > 2000m)))
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0006-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0006-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Deepth / 1000m - 898m / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0006-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0006-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
//----------排风腔----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0070-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swPart.Parameter("D2@Sketch9").SystemValue = midRoofSecondHoleDis;
if (midRoofHoleNo == 1)
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = midRoofHoleNo;
}
//排风口
//if (item.ExNo == 1)
//{
swFeat = swComp.FeatureByName("EXCOONE");
swFeat.SetSuppression2(1, 2, configNames);
//swFeat = swComp.FeatureByName("EXCOTWO");
//swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//swPart.Parameter("D4@Sketch11").SystemValue = item.ExRightDis / 1000m;
swPart.Parameter("D2@Sketch4").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D3@Sketch4").SystemValue = item.ExWidth / 1000m;
//}
//else
//{
// swFeat = swComp.FeatureByName("EXCOONE");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
// swFeat = swComp.FeatureByName("EXCOTWO");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D5@Sketch12").SystemValue = item.ExRightDis / 1000m;
// swPart.Parameter("D4@Sketch12").SystemValue = item.ExDis / 1000m;
// swPart.Parameter("D1@Sketch12").SystemValue = item.ExLength / 1000m;
// swPart.Parameter("D2@Sketch12").SystemValue = item.ExWidth / 1000m;
//}
//下水口/上排水
if (item.Outlet == "LEFT")
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Outlet == "RIGHT")
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Outlet == "UPLEFT")
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Outlet == "UPRIGHT")
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//背靠背
if (item.BackToBack == "YES")
{
swFeat = swComp.FeatureByName("BACKTOBACK");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("BACKTOBACK");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//进水口
if (item.Inlet == "LEFT")
{
swFeat = swComp.FeatureByName("DRWATER INLET-L");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRWATER INLET-R");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Inlet == "RIGHT")
{
swFeat = swComp.FeatureByName("DRWATER INLET-L");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRWATER INLET-R");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("DRWATER INLET-L");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRWATER INLET-R");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//ANSUL
if (item.ANSUL == "YES")
{
//侧喷
if (item.ANSide == "LEFT")
{
swFeat = swComp.FeatureByName("ANSUL-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANSide == "RIGHT")
{
swFeat = swComp.FeatureByName("ANSUL-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANSUL-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSUL-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------排风腔前面板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0071-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0074-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 7.5m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0088-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 7.5m) / 1000m;
//----------排风滑门/导轨----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-2"));
if (item.ExWidth == 300m)
{
swComp.SetSuppression2(0); //2解压缩，0压缩
}
else
{
swComp.SetSuppression2(2); //2解压缩，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-1"));
if (item.ExWidth == 300m)
{
swComp.SetSuppression2(0); //2解压缩，0压缩
}
else
{
swComp.SetSuppression2(2);//2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength / 2 + 10m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExWidth + 40m) / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
if (item.ExNo == 1)
{
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 2 + 100m) / 1000m;
}
else
{
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 3 + item.ExDis + 100m) / 1000m;
}
//----------排风脖颈----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0089-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = item.ExHeight / 1000m;
//swFeat = swComp.FeatureByName("ANSUL");
//if (item.ANSUL == "YES") swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
//else swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0090-1"));
swComp.SetSuppression2(2);//2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExWidth - 2.5m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = item.ExHeight / 1000m;
//----------排风腔内部零件----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0075-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 113m) / 2000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0078-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 170m) / 2000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0079-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 200m) / 2000m;
//----------灯具----------
//日光灯
if (item.LightType == "FSLONG")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020410-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020409-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
else if (item.LightType == "FSSHORT")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020410-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020409-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020410-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020409-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
//----------MiddleRoof灯板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0001-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Length - 4m) / 1000m;
swPart.Parameter("D2@草图1").SystemValue = (item.Deepth - 424m) / 1000m;
swPart.Parameter("D1@草图6").SystemValue = (item.Deepth - 651m) / 1000m;
swPart.Parameter("D3@草图25").SystemValue = midRoofTopHoleDis;
swPart.Parameter("D2@草图26").SystemValue = (item.Deepth - 595m) / 3000;
swPart.Parameter("D1@Sketch3").SystemValue = midRoofSecondHoleDis - 2m / 1000m;
swFeat = swComp.FeatureByName("NAMEPLATE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern1");
if (midRoofHoleNo == 1)
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = midRoofHoleNo;
}
//灯具
if (item.LightType == "LED60")
{
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.LEDSpotNo == 1)
{
swPart.Parameter("D2@Sketch1").SystemValue = 0;
}
else
{
swPart.Parameter("D2@Sketch1").SystemValue = (item.LEDSpotDis * (item.LEDSpotNo / 2m - 1) + item.LEDSpotDis / 2m) / 1000m;
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern2").SystemValue = item.LEDSpotNo;
swPart.Parameter("D3@LPattern2").SystemValue = item.LEDSpotDis / 1000m;
}
}
else if (item.LightType == "LED60")
{
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.LEDSpotNo == 1)
{
swPart.Parameter("D5@Sketch7").SystemValue = 0;
}
else
{
swPart.Parameter("D5@Sketch7").SystemValue = (item.LEDSpotDis * (item.LEDSpotNo / 2m - 1) + item.LEDSpotDis / 2m) / 1000m;
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern3").SystemValue = item.LEDSpotNo;
swPart.Parameter("D3@LPattern3").SystemValue = item.LEDSpotDis / 1000m;
}
}
else if (item.LightType == "FSLONG")
{
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightType == "FSSHORT")
{
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//ANSUL
if (item.ANSUL == "YES")
{
swFeat = swComp.FeatureByName("AN1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//下喷
if (item.ANDropNo > 0)
{
swFeat = swComp.FeatureByName("AN1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch11").SystemValue = item.ANDropDis1 / 1000m;
swPart.Parameter("D3@Sketch11").SystemValue = (item.ANYDis - 360m) / 1000m;
}
if (item.ANDropNo > 1)
{
swFeat = swComp.FeatureByName("AN2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch12").SystemValue = item.ANDropDis2 / 1000m;
}
if (item.ANDropNo > 2)
{
swFeat = swComp.FeatureByName("AN3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch13").SystemValue = item.ANDropDis3 / 1000m;
}
if (item.ANDropNo > 3)
{
swFeat = swComp.FeatureByName("AN4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch14").SystemValue = item.ANDropDis4 / 1000m;
}
if (item.ANDropNo > 4)
{
swFeat = swComp.FeatureByName("AN5");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch15").SystemValue = item.ANDropDis5 / 1000m;
}
//探测器
if (item.ANDetectorNo > 0)
{
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch31").SystemValue = item.ANDetectorDis1 / 1000m;
if (item.ANDetectorEnd == "LEFT" || (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 1))
{
swPart.Parameter("D2@Sketch31").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch31").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 1)
{
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch32").SystemValue = item.ANDetectorDis2 / 1000m;
if (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 2)
{
swPart.Parameter("D2@Sketch32").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch32").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 2)
{
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch33").SystemValue = item.ANDetectorDis3 / 1000m;
if (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 3)
{
swPart.Parameter("D2@Sketch33").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch33").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 3)
{
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch34").SystemValue = item.ANDetectorDis4 / 1000m;
if (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 4)
{
swPart.Parameter("D2@Sketch34").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch34").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 4)
{
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch35").SystemValue = item.ANDetectorDis5 / 1000m;
if (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 5)
{
swPart.Parameter("D2@Sketch35").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch35").SystemValue = 175m / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("AN1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//UW/KW HOOD 水洗烟罩探测器在midRoof上，非水洗烟罩压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//开方孔，UV或待MARVEL时解压
swFeat = swComp.FeatureByName("CUT-BACK-LEFT");
if (item.MARVEL == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("CUT-BACK-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("CUT-FRONT-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//UV灯线缆穿孔
swFeat = swComp.FeatureByName("UVCABLE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//CMOD NTC Sensor
swFeat = swComp.FeatureByName("NTC Sensor");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
//----------吊装槽钢----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100001-1"));
swPart = swComp.GetModelDoc2();
if (item.ANSUL == "YES")
{
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.Deepth - 250) / 1000m;
}
else
{
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.Deepth - 100m) / 1000m;
}
//----------大侧板----------
if (item.SidePanel == "BOTH")
{
//LEFT
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0001-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = item.Deepth / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = sidePanelSideCjNo;
swPart.Parameter("D1@阵列(线性)2").SystemValue = sidePanelDownCjNo;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0002-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Deepth - 79m) / 1000m;
//RIGHT
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0003-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = item.Deepth / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = sidePanelSideCjNo;
swPart.Parameter("D1@阵列(线性)2").SystemValue = sidePanelDownCjNo;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0004-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Deepth - 79m) / 1000m;
}
else if (item.SidePanel == "LEFT")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0003-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0004-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0001-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = item.Deepth / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = sidePanelSideCjNo;
swPart.Parameter("D1@阵列(线性)2").SystemValue = sidePanelDownCjNo;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0002-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Deepth - 79m) / 1000m;
}
else if (item.SidePanel == "RIGHT")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0001-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0002-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0003-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = item.Deepth / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = sidePanelSideCjNo;
swPart.Parameter("D1@阵列(线性)2").SystemValue = sidePanelDownCjNo;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0004-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Deepth - 79m) / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0001-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0002-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0003-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0004-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0005-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0006-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
//------------I型新风腔主体----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0001-2"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@基体-法兰1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = frontPanelKaKouNo;
swPart.Parameter("D3@阵列(线性)1").SystemValue = frontPanelKaKouDis;
swPart.Parameter("D3@Sketch3").SystemValue = midRoofSecondHoleDis;
swPart.Parameter("D9@草图7").SystemValue = 200m / 1000m - midRoofTopHoleDis;
swFeat = swComp.FeatureByName("LPattern1");
if (midRoofHoleNo == 1)
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = midRoofHoleNo;
}
//MARVEL
if (item.MARVEL == "YES")
{
if (item.IRNo > 0)
{
swFeat = swComp.FeatureByName("MA1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch14").SystemValue = item.IRDis1 / 1000m;
swFeat = swComp.FeatureByName("MACABLE1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch17").SystemValue = item.IRDis1 / 1000m;
}
if (item.IRNo > 1)
{
swFeat = swComp.FeatureByName("MA2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch15").SystemValue = item.IRDis2 / 1000m;
swFeat = swComp.FeatureByName("MACABLE2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch18").SystemValue = item.IRDis2 / 1000m;
}
if (item.IRNo > 2)
{
swFeat = swComp.FeatureByName("MA3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch16").SystemValue = item.IRDis3 / 1000m;
swFeat = swComp.FeatureByName("MACABLE3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch19").SystemValue = item.IRDis3 / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("MA1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MACABLE1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MACABLE2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MACABLE3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//UV HOOD
swFeat = swComp.FeatureByName("SUCABLE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("JUNCTION BOX-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//----------新风前面板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0003-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Length - 3m) / 1000m;
swPart.Parameter("D1@阵列(线性)7").SystemValue = frontPanelKaKouNo;
swPart.Parameter("D3@阵列(线性)7").SystemValue = frontPanelKaKouDis;
swPart.Parameter("D1@LPattern1").SystemValue = frontPanelHoleNo;
swPart.Parameter("D3@LPattern1").SystemValue = frontPanelHoleDis;
//----------新风底部CJ孔板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0002-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@基体-法兰1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@CJHOLES").SystemValue = frontCjNo;
swPart.Parameter("D10@草图8").SystemValue = frontCjFirstDis;
swPart.Parameter("D1@LPattern1").SystemValue = frontPanelHoleNo;
swPart.Parameter("D3@LPattern1").SystemValue = frontPanelHoleDis;
swFeat = swComp.FeatureByName("BLUETOOTH");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LOGO");
if (item.LEDlogo == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//集水翻边
swFeat = swComp.FeatureByName("DRAINCHANNEL-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINCHANNEL-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//----------LOGO----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900300005-1"));
if (item.LEDlogo == "YES")
{
swComp.SetSuppression2(2); //2解压缩，0压缩
}
else
{
swComp.SetSuppression2(0); //2解压缩，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201010401-1"));
if (item.LEDlogo == "YES")
{
swComp.SetSuppression2(2); //2解压缩，0压缩
}
else
{
swComp.SetSuppression2(0); //2解压缩，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}