public BadMarkCmd(RunnableModule runnableModule, BadMarkCmdLine badMarkCmdLine) : base(runnableModule, badMarkCmdLine)
{
// 转换成机械坐标
var structure = runnableModule.CommandsModule.program.ModuleStructure;
position = structure.ToMachine(runnableModule, badMarkCmdLine.Position);
modelFindPrm = badMarkCmdLine.ModelFindPrm;
GrayCheckPrm = badMarkCmdLine.GrayCheckPrm;
this.FindType = badMarkCmdLine.FindType;
this.IsOkSkip = badMarkCmdLine.IsOkSkip;
}
public EditBadMarkForm(Pattern pattern, BadMarkCmdLine badMarkCmdLine)
{
InitializeComponent();
this.FormBorderStyle = FormBorderStyle.FixedDialog;
this.StartPosition = FormStartPosition.CenterParent;
this.pattern = pattern;
if (badMarkCmdLine == null)
{
this.isCreating = true;
badMarkCmdLine = new BadMarkCmdLine();
}
this.badMarkCmdLine = badMarkCmdLine;
if (this.badMarkCmdLine.FindType == BadMarkCmdLine.BadMarkType.ModelFind)
{
rbModelFind.Checked = true;
}
else
{
rbGrayScale.Checked = true;
}
if (this.badMarkCmdLine.IsOkSkip)
{
rbOkSkip.Checked = true;
}
else
{
rbNgSkip.Checked = true;
}
this.ReadLanguageResources();
if (this.badMarkCmdLine != null)
{
this.badMarkCmdLineBackUp = (BadMarkCmdLine)this.badMarkCmdLine.Clone();
}
}
/// <summary>
/// 将程序指令解析为绘图指令，添加到绘图workpiece或者pattern中
/// </summary>
/// <param name="cmdLine"></param>
/// <param name="pattern"></param>
private void Parse(CmdLine cmdLine, DrawPattern pattern)
{
if (cmdLine is ArcCmdLine)
{
ArcCmdLine arc = cmdLine as ArcCmdLine;
PointF centerPosition = new PointF((float)arc.Center.X, (float)arc.Center.Y);
PointF startPosition = new PointF((float)arc.Start.X, (float)arc.Start.Y);
PointF endPosition = new PointF((float)arc.End.X, (float)arc.End.Y);
float degree = (float)arc.Degree;
ArcDrawCmd arcDrawCmd = new ArcDrawCmd(centerPosition, startPosition, endPosition, degree, arc.Enabled);
pattern.Add(arcDrawCmd);
}
//如果是DoPattern指令
else if (cmdLine is DoCmdLine)
{
if (this._drawPatterns.Count <= 0)
{
pattern.Add(null);
}
else if (pattern.GetType().Equals(typeof(DrawWorkPiece)))
{
DoCmdLine doPattern = cmdLine as DoCmdLine;
//判断是paternList里的哪一个pattern
int index = 0;
for (int i = 0; i < fluidProgram.Patterns.Count; i++)
{
if (fluidProgram.Patterns[i].Name.Equals(doPattern.PatternName))
{
index = i;
}
}
PointF origin = new PointF((float)doPattern.Origin.X, (float)doPattern.Origin.Y);
DoPatternDrawCmd doPatternDrawCmd = new DoPatternDrawCmd(this._drawPatterns[index], origin, doPattern.Enabled);
pattern.Add(doPatternDrawCmd);
}
else
{
pattern.Add(null);
}
}
else if (cmdLine is StepAndRepeatCmdLine)
{
if (pattern.GetType().Equals(typeof(DrawWorkPiece)))
{
StepAndRepeatCmdLine array = cmdLine as StepAndRepeatCmdLine;
//判断是paternList里的哪一个pattern
int index = 0;
for (int i = 0; i < fluidProgram.Patterns.Count; i++)
{
if (fluidProgram.Patterns[i].Name.Equals(array.PatternName))
{
index = i;
}
}
PointF[] points = new PointF[array.DoCmdLineList.Count];
for (int i = 0; i < array.DoCmdLineList.Count; i++)
{
points[i] = new PointF((float)array.DoCmdLineList[i].Origin.X, (float)array.DoCmdLineList[i].Origin.Y);
}
ArrayDrawCmd arrayDrawCmd = new ArrayDrawCmd(this._drawPatterns[index], points, array.Enabled);
pattern.Add(arrayDrawCmd);
}
else
{
pattern.Add(null);
}
}
else if (cmdLine is CircleCmdLine)
{
CircleCmdLine circle = cmdLine as CircleCmdLine;
PointF centerPosition = new PointF((float)circle.Center.X, (float)circle.Center.Y);
float radius = (float)Math.Sqrt(Math.Pow(Math.Abs(circle.Start.X - circle.Center.X), 2) + Math.Pow(Math.Abs(circle.Start.Y - circle.Center.Y), 2));
CircleDrawCmd circleDrawCmd = new CircleDrawCmd(centerPosition, radius, circle.Enabled);
pattern.Add(circleDrawCmd);
}
else if (cmdLine is DoMultiPassCmdLine)
{
if (pattern.GetType().Equals(typeof(DrawWorkPiece)))
{
DoMultiPassCmdLine doMultiPass = cmdLine as DoMultiPassCmdLine;
//判断是paternList里的哪一个pattern
int index = 0;
for (int i = 0; i < fluidProgram.Patterns.Count; i++)
{
if (fluidProgram.Patterns[i].Name.Equals(doMultiPass.PatternName))
{
index = i;
}
}
PointF position = new PointF((float)doMultiPass.Origin.X, (float)doMultiPass.Origin.Y);
DoMultiPassDrawCmd doMultiDrawCmd = new DoMultiPassDrawCmd(this._drawPatterns[index], position, doMultiPass.Enabled);
pattern.Add(doMultiDrawCmd);
}
else
{
pattern.Add(null);
}
}
else if (cmdLine is DotCmdLine)
{
DotCmdLine dot = cmdLine as DotCmdLine;
PointF centerPosition = new PointF((float)dot.Position.X, (float)dot.Position.Y);
DotDrawCmd dotDrawCmd = new DotDrawCmd(centerPosition, dot.Enabled);
pattern.Add(dotDrawCmd);
}
else if (cmdLine is MeasureHeightCmdLine)
{
MeasureHeightCmdLine height = cmdLine as MeasureHeightCmdLine;
PointF position = new PointF((float)height.Position.X, (float)height.Position.Y);
HeightDrawCmd heightDrawCmd = new HeightDrawCmd(position, height.Enabled);
pattern.Add(heightDrawCmd);
}
///包含line、lines和polyline
else if (cmdLine is LineCmdLine)
{
LineCmdLine line = cmdLine as LineCmdLine;
int jointCount = 0;
if (line.LineCoordinateList.Count == 1)
{
PointF startPoint = new PointF((float)line.LineCoordinateList[0].Start.X, (float)line.LineCoordinateList[0].Start.Y);
PointF endPoint = new PointF((float)line.LineCoordinateList[0].End.X, (float)line.LineCoordinateList[0].End.Y);
LineDrawCmd lineDrawCmd = new LineDrawCmd(startPoint, endPoint, true, line.Enabled);
pattern.Add(lineDrawCmd);
}
else if (line.LineCoordinateList.Count > 1)
{
Line2Points[] lines = new Line2Points[line.LineCoordinateList.Count];
for (int i = 0; i < line.LineCoordinateList.Count; i++)
{
PointF startPoint = new PointF((float)line.LineCoordinateList[i].Start.X, (float)line.LineCoordinateList[i].Start.Y);
PointF endPoint = new PointF((float)line.LineCoordinateList[i].End.X, (float)line.LineCoordinateList[i].End.Y);
lines[i] = new Line2Points(startPoint, endPoint);
//判断是不是polyline(如果所有相邻线段首尾点一致，则为polyline)
if (i > 0 && lines[i].StartPoint == lines[i - 1].EndPoint)
{
jointCount++;
}
}
//如果是polyline
if (jointCount == line.LineCoordinateList.Count - 1)
{
PointF[] points = new PointF[line.LineCoordinateList.Count + 1];
for (int i = 0; i < lines.Length + 1; i++)
{
if (i == 0)
{
points[i] = new PointF((float)lines[0].StartPoint.X, (float)lines[0].StartPoint.Y);
}
else
{
points[i] = new PointF((float)lines[i - 1].EndPoint.X, (float)lines[i - 1].EndPoint.Y);
}
}
PolyLineDrawCmd polyLineDrawCmd = new PolyLineDrawCmd(points, line.Enabled);
pattern.Add(polyLineDrawCmd);
}
//如果是lines
else
{
LinesDrawCmd linesDrawCmd = new LinesDrawCmd(lines, true, line.Enabled);
pattern.Add(linesDrawCmd);
}
}
}
else if (cmdLine is MarkCmdLine)
{
MarkCmdLine mark = cmdLine as MarkCmdLine;
PointF position = new PointF((float)mark.PosInPattern.X, (float)mark.PosInPattern.Y);
MarkDrawCmd markDrawCmd = new MarkDrawCmd(position, mark.Enabled, MarkType.NormalMark);
pattern.Add(markDrawCmd);
}
else if (cmdLine is BadMarkCmdLine)
{
BadMarkCmdLine mark = cmdLine as BadMarkCmdLine;
PointF position = new PointF((float)mark.Position.X, (float)mark.Position.Y);
MarkDrawCmd markDrawCmd = new MarkDrawCmd(position, mark.Enabled, MarkType.BadMark);
pattern.Add(markDrawCmd);
}
else if (cmdLine is NozzleCheckCmdLine)
{
NozzleCheckCmdLine mark = cmdLine as NozzleCheckCmdLine;
PointF position = new PointF((float)mark.Position.X, (float)mark.Position.Y);
MarkDrawCmd markDrawCmd = new MarkDrawCmd(position, mark.Enabled, MarkType.CheckDotMark);
pattern.Add(markDrawCmd);
}
else if (cmdLine is SnakeLineCmdLine)
{
SnakeLineCmdLine snake = cmdLine as SnakeLineCmdLine;
Line2Points[] lines = new Line2Points[snake.LineCoordinateList.Count];
for (int i = 0; i < snake.LineCoordinateList.Count; i++)
{
PointF startPoint = new PointF((float)snake.LineCoordinateList[i].Start.X, (float)snake.LineCoordinateList[i].Start.Y);
PointF endPoint = new PointF((float)snake.LineCoordinateList[i].End.X, (float)snake.LineCoordinateList[i].End.Y);
lines[i] = new Line2Points(startPoint, endPoint);
}
SnakeLineDrawCmd snakeLineDrawCmd = new SnakeLineDrawCmd(lines, true, snake.Enabled);
pattern.Add(snakeLineDrawCmd);
}
else if (cmdLine is SymbolLinesCmdLine)
{
SymbolLinesCmdLine symbolLines = cmdLine as SymbolLinesCmdLine;
SymbolLinesDrawCmd symbolLinesDrawCmd = new SymbolLinesDrawCmd(symbolLines.Symbols, symbolLines.Enabled);
pattern.Add(symbolLinesDrawCmd);
}
else if (cmdLine is MultiTracesCmdLine)
{
MultiTracesCmdLine tracesCmdLine = cmdLine as MultiTracesCmdLine;
MultiTracesDrawCmd tracesDrawCmd = new MultiTracesDrawCmd(tracesCmdLine.Traces, tracesCmdLine.Enabled);
pattern.Add(tracesDrawCmd);
}
//如果是别的逻辑指令，为了保证和程序指令一致性，添加一个null进去
else
{
pattern.Add(null);
}
}
