public static void Run(string[] args)
{
Console.WriteLine("Nusbio initialization");
var serialNumber = Nusbio.Detect();
if (serialNumber == null) // Detect the first Nusbio available
{
Console.WriteLine("Nusbio not detected");
return;
}
using (var nusbio = new Nusbio(serialNumber))
{
Cls(nusbio);
const int motionSensorAnalogPort = 0;
const int temperatureSensorAnalogPort = 1;
const int multiButtonPort = 3;
const int lightSensorAnalogPort = 6; // Has a pull down resistor
var halfSeconds = new TimeOut(200);
/*
* Mcp300X - SPI Config
* gpio 0 - CLOCK
* gpio 1 - MOSI
* gpio 2 - MISO
* gpio 3 - SELECT
*/
ad = new MCP3008(nusbio,
selectGpio: NusbioGpio.Gpio3,
mosiGpio: NusbioGpio.Gpio1,
misoGpio: NusbioGpio.Gpio2,
clockGpio: NusbioGpio.Gpio0);
ad.Begin();
var analogTempSensor = new Tmp36AnalogTemperatureSensor(nusbio, 5);
analogTempSensor.Begin();
var analogMotionSensor = new AnalogMotionSensor(nusbio, 4);
analogMotionSensor.Begin();
var lightSensor = CalibrateLightSensor(new AnalogLightSensor(nusbio), AnalogLightSensor.LightSensorType.CdsPhotoCell_3mm_45k_140k);
lightSensor.Begin();
AnalogSensor multiButton = null;
//multiButton = new AnalogSensor(nusbio, multiButtonPort);
//multiButton.Begin();
ulong loopCounter = 0;
while (nusbio.Loop())
{
if (halfSeconds.IsTimeOut())
{
ConsoleEx.WriteLine(0, 2, string.Format("{0,-20}, {1}", DateTime.Now, loopCounter++), ConsoleColor.Cyan);
lightSensor.SetAnalogValue(ad.Read(lightSensorAnalogPort));
ConsoleEx.WriteLine(0, 4, string.Format("Light Sensor : {0} (ADValue:{1:000.000}, Volt:{2:000.000}) ",
lightSensor.CalibratedValue.PadRight(18),
lightSensor.AnalogValue,
lightSensor.Voltage), ConsoleColor.Cyan);
// There is an issue with the TMP36 and the ADC MCP3008
// The correction is to add a 2k resistors between the out of the temperature sensor
// and the AD port and increase the value by 14%
const int TMP36_AccuracyCorrection = 14;
analogTempSensor.SetAnalogValue(ad.Read(temperatureSensorAnalogPort, TMP36_AccuracyCorrection));
ConsoleEx.WriteLine(0, 6, string.Format("Temperature Sensor : {0:00.00}C, {1:00.00}F (ADValue:{2:0000}, Volt:{3:000.000}) ",
analogTempSensor.GetTemperature(AnalogTemperatureSensor.TemperatureType.Celsius),
analogTempSensor.GetTemperature(AnalogTemperatureSensor.TemperatureType.Fahrenheit),
analogTempSensor.AnalogValue,
analogTempSensor.Voltage), ConsoleColor.Cyan);
analogMotionSensor.SetAnalogValue(ad.Read(motionSensorAnalogPort));
var motionType = analogMotionSensor.MotionDetected();
if (motionType == DigitalMotionSensorPIR.MotionDetectedType.MotionDetected ||
motionType == DigitalMotionSensorPIR.MotionDetectedType.None ||
motionType == DigitalMotionSensorPIR.MotionDetectedType.SameMotionDetected)
{
ConsoleEx.Write(0, 8, string.Format("Motion Sensor : {0,-18} (ADValue:{1:000.000}, Volt:{2:000.000})", motionType, analogMotionSensor.AnalogValue, analogMotionSensor.Voltage), ConsoleColor.Cyan);
}
if (multiButton != null)
{
multiButton.SetAnalogValue(ad.Read(multiButtonPort));
ConsoleEx.Write(0, 10, string.Format("Multi Button : {0,-18} (ADValue:{1:000.000}, Volt:{2:000.000})",
multiButton.AnalogValue > 2 ? "Down" : "Up ",
multiButton.AnalogValue,
multiButton.Voltage), ConsoleColor.Cyan);
}
}
if (Console.KeyAvailable)
{
var k = Console.ReadKey(true).Key;
if (k == ConsoleKey.C)
{
Cls(nusbio);
}
if (k == ConsoleKey.Q)
{
break;
}
Cls(nusbio);
}
}
}
Console.Clear();
}
public static void Run(string[] args)
{
Console.WriteLine("Nusbio initialization");
var serialNumber = Nusbio.Detect();
if (serialNumber == null) // Detect the first Nusbio available
{
Console.WriteLine("Nusbio not detected");
return;
}
var lightSensorAnalogPort = 2;
var motionSensorAnalogPort = 0;
var buttonSensorAnalogPort = 1;
var ledGpio = NusbioGpio.Gpio5;
using (var nusbio = new Nusbio(serialNumber))
{
Cls(nusbio);
var halfSeconds = new TimeOut(333);
// Mcp300X Analog To Digital - SPI Config
ad = new MCP3008(nusbio,
selectGpio: NusbioGpio.Gpio3,
mosiGpio: NusbioGpio.Gpio1,
misoGpio: NusbioGpio.Gpio2,
clockGpio: NusbioGpio.Gpio0);
ad.Begin();
var analogMotionSensor = new AnalogMotionSensor(nusbio, 4);
analogMotionSensor.Begin();
var button = new AnalogButton(nusbio);
var lightSensor = CalibrateLightSensor(new AnalogLightSensor(nusbio), AnalogLightSensor.LightSensorType.CdsPhotoCell_3mm_45k_140k);
lightSensor.Begin();
// Analog Port 5, 6, 7 are only available in
// Analog Extension PCBv2
const int multiButtonPort = 5;
AnalogSensor multiButton = null;
//multiButton = new AnalogSensor(nusbio, multiButtonPort);
//multiButton.Begin();
// TC77 Temperature Sensor SPI
var tc77 = new TC77(nusbio,
clockGpio: NusbioGpio.Gpio0,
mosiGpio: NusbioGpio.Gpio1,
misoGpio: NusbioGpio.Gpio2,
selectGpio: NusbioGpio.Gpio4
);
tc77.Begin();
if (nusbio.Type == NusbioType.NusbioType1_Light)
{
tc77._spi.SoftwareBitBangingMode = true;
ad._spiEngine.SoftwareBitBangingMode = true;
}
while (nusbio.Loop())
{
if (halfSeconds.IsTimeOut())
{
nusbio[ledGpio].AsLed.ReverseSet();
ConsoleEx.WriteLine(0, 2, string.Format("{0,-15}", DateTime.Now), ConsoleColor.Cyan);
lightSensor.SetAnalogValue(ad.Read(lightSensorAnalogPort));
ConsoleEx.WriteLine(0, 4, string.Format("Light Sensor : {0,-18} (ADValue:{1:000.000}, Volt:{2:0.00}) ",
lightSensor.CalibratedValue.PadRight(18), lightSensor.AnalogValue, lightSensor.Voltage), ConsoleColor.Cyan);
analogMotionSensor.SetAnalogValue(ad.Read(motionSensorAnalogPort));
var motionType = analogMotionSensor.MotionDetected();
if (motionType == DigitalMotionSensorPIR.MotionDetectedType.MotionDetected || motionType == DigitalMotionSensorPIR.MotionDetectedType.None)
{
ConsoleEx.Write(0, 6, string.Format("Motion Sensor : {0,-18} (ADValue:{1:000.000}, Volt:{2:0.00}) ",
motionType, analogMotionSensor.AnalogValue, analogMotionSensor.Voltage), ConsoleColor.Cyan);
}
ConsoleEx.WriteLine(0, 8, string.Format("Temperature Sensor : {0:0.00}C {1:0.00}F ", tc77.GetTemperature(),
tc77.GetTemperature(AnalogTemperatureSensor.TemperatureType.Fahrenheit)), ConsoleColor.Cyan);
button.SetAnalogValue(ad.Read(buttonSensorAnalogPort));
ConsoleEx.WriteLine(0, 10, string.Format("Button : {0,-18} [{1:0000}, {2:0.00}V] ",
button.Down ? "Down" : "Up", button.AnalogValue, button.Voltage), ConsoleColor.Cyan);
if (multiButton != null)
{
multiButton.SetAnalogValue(ad.Read(multiButtonPort));
ConsoleEx.Write(0, 12, string.Format("Multi Button : {0,-18} (ADValue:{1:000.000}, Volt:{2:000.000})",
multiButton.AnalogValue > 2 ? "Down" : "Up ",
multiButton.AnalogValue,
multiButton.Voltage), ConsoleColor.Cyan);
}
}
if (Console.KeyAvailable)
{
var k = Console.ReadKey(true).Key;
if (k == ConsoleKey.C)
{
Cls(nusbio);
}
if (k == ConsoleKey.Q)
{
break;
}
Cls(nusbio);
}
}
}
Console.Clear();
}
public static void Run(string[] args)
{
Console.WriteLine("Nusbio initialization");
var serialNumber = Nusbio.Detect();
if (serialNumber == null) // Detect the first Nusbio available
{
Console.WriteLine("Nusbio not detected");
return;
}
using (var nusbio = new Nusbio(serialNumber))
{
Cls(nusbio);
var halfSeconds = new TimeOut(500);
/*
Mcp300X - SPI Config
gpio 0 - CLOCK
gpio 1 - MOSI
gpio 2 - MISO
gpio 3 - SELECT
*/
ad = new Mcp3008(nusbio,
selectGpio: NusbioGpio.Gpio3, mosiGpio: NusbioGpio.Gpio1,
misoGpio: NusbioGpio.Gpio2, clockGpio: NusbioGpio.Gpio0);
ad.Begin();
var analogTempSensor = new Tmp36AnalogTemperatureSensor(nusbio);
analogTempSensor.Begin();
var analogMotionSensor = new AnalogMotionSensor(nusbio, 4);
analogMotionSensor.Begin();
var lightSensor = new AnalogLightSensor(nusbio);
lightSensor.AddCalibarationValue("Dark", 0, 100);
lightSensor.AddCalibarationValue("Office Night", 101, 299);
lightSensor.AddCalibarationValue("Office Day", 300, 400);
lightSensor.AddCalibarationValue("Outdoor Sun Light", 401, 1000);
lightSensor.Begin();
while(nusbio.Loop())
{
if (halfSeconds.IsTimeOut())
{
const int lightSensorAnalogPort = 7;
const int motionSensorAnalogPort = 6;
const int temperatureSensorAnalogPort = 5;
ConsoleEx.WriteLine(0, 2, string.Format("{0,-20}", DateTime.Now, lightSensor.AnalogValue), ConsoleColor.Cyan);
lightSensor.SetAnalogValue(ad.Read(lightSensorAnalogPort));
ConsoleEx.WriteLine(0, 4, string.Format("Light Sensor : {0} (ADValue:{1:000.000})", lightSensor.CalibratedValue.PadRight(18), lightSensor.AnalogValue), ConsoleColor.Cyan);
analogTempSensor.SetAnalogValue(ad.Read(temperatureSensorAnalogPort));
ConsoleEx.WriteLine(0, 6, string.Format("Temperature Sensor: {0:00.00}C, {1:00.00}F (ADValue:{2:0000}) ", analogTempSensor.GetTemperature(AnalogTemperatureSensor.TemperatureType.Celsius), analogTempSensor.GetTemperature(AnalogTemperatureSensor.TemperatureType.Fahrenheit), analogTempSensor.AnalogValue), ConsoleColor.Cyan);
analogMotionSensor.SetAnalogValue(ad.Read(motionSensorAnalogPort));
var motionType = analogMotionSensor.MotionDetected();
if (motionType == MotionSensorPIR.MotionDetectedType.MotionDetected || motionType == MotionSensorPIR.MotionDetectedType.None)
{
ConsoleEx.Write(0, 8, string.Format("Motion Sensor : {0,-20} (ADValue:{1:000})", motionType, analogMotionSensor.AnalogValue), ConsoleColor.Cyan);
}
}
if (Console.KeyAvailable)
{
var k = Console.ReadKey(true).Key;
if (k == ConsoleKey.C)
{
Cls(nusbio);
}
if (k == ConsoleKey.Q) {
break;
}
Cls(nusbio);
}
}
}
Console.Clear();
}