/*=====================================================================
| MAIN PROGRAM
| ====================================================================*/
public static void Main(string[] args)
{
int port;
int handle;
int result;
AardvarkApi.AardvarkExt aaExt = new AardvarkApi.AardvarkExt();
if (args.Length != 1)
{
Console.WriteLine("usage: aamonitor PORT");
return;
}
// Parse the port argument
try {
port = Convert.ToInt32(args[0]);
}
catch (Exception) {
Console.WriteLine("Error: invalid port");
return;
}
// Open the device
handle = AardvarkApi.aa_open_ext(port, ref aaExt);
if (handle <= 0)
{
Console.WriteLine("Unable to open Aardvark device on port {0}",
port);
Console.WriteLine("error: {0}",
AardvarkApi.aa_status_string(handle));
return;
}
Console.WriteLine("Opened Aardvark; features = 0x{0:x2}",
aaExt.features);
// Disable the I2C bus pullup resistors (2.2k resistors).
// This command is only effective on v2.0 hardware or greater.
// The pullup resistors on the v1.02 hardware are enabled by default.
AardvarkApi.aa_i2c_pullup(handle, AardvarkApi.AA_I2C_PULLUP_NONE);
// Disable the Aardvark adapter's power pins.
// This command is only effective on v2.0 hardware or greater.
// The power pins on the v1.02 hardware are not enabled by default.
AardvarkApi.aa_target_power(handle, AardvarkApi.AA_TARGET_POWER_NONE);
// Enable the monitor
result = AardvarkApi.aa_i2c_monitor_enable(handle);
if (result < 0)
{
Console.WriteLine("error: {0}",
AardvarkApi.aa_status_string(result));
return;
}
Console.WriteLine("Enabled I2C monitor.");
// Dump the data to the console
dump(handle);
// Disable the monitor and close the device
AardvarkApi.aa_i2c_monitor_disable(handle);
AardvarkApi.aa_close(handle);
}
/*=====================================================================
| MAIN PROGRAM
| ====================================================================*/
public static void Main(string[] args)
{
int port = -1;
byte val;
int handle;
AardvarkApi.AardvarkExt aaExt = new AardvarkApi.AardvarkExt();
if (args.Length != 1)
{
Console.WriteLine("usage: aagpio PORT");
return;
}
try {
port = Convert.ToInt32(args[0]);
}
catch (Exception) {
Console.WriteLine("Error: invalid port number");
}
// Open the device
handle = AardvarkApi.aa_open_ext(port, ref aaExt);
if (handle <= 0)
{
Console.WriteLine("Unable to open Aardvark device on port {0}",
port);
Console.WriteLine("error: {0}",
AardvarkApi.aa_status_string(handle));
return;
}
Console.WriteLine("Opened Aardvark adapter");
// Configure the Aardvark adapter so all pins
// are now controlled by the GPIO subsystem
AardvarkApi.aa_configure(handle, AardvarkConfig.AA_CONFIG_GPIO_ONLY);
// Turn off the external I2C line pullups
AardvarkApi.aa_i2c_pullup(handle, AardvarkApi.AA_I2C_PULLUP_NONE);
// Make sure the charge has dissipated on those lines
AardvarkApi.aa_gpio_set(handle, 0x00);
AardvarkApi.aa_gpio_direction(handle, 0xff);
// By default all GPIO pins are inputs. Writing 1 to the
// bit position corresponding to the appropriate line will
// configure that line as an output
AardvarkApi.aa_gpio_direction(handle,
(byte)(AardvarkGpioBits.AA_GPIO_SS | AardvarkGpioBits.AA_GPIO_SCL));
// By default all GPIO outputs are logic low. Writing a 1
// to the appropriate bit position will force that line
// high provided it is configured as an output. If it is
// not configured as an output the line state will be
// cached such that if the direction later changed, the
// latest output value for the line will be enforced.
AardvarkApi.aa_gpio_set(handle, (byte)AardvarkGpioBits.AA_GPIO_SCL);
Console.WriteLine("Setting SCL to logic low");
// The get method will return the line states of all inputs.
// If a line is not configured as an input the value of
// that particular bit position in the mask will be 0.
val = (byte)AardvarkApi.aa_gpio_get(handle);
// Check the state of SCK
if ((val & (byte)AardvarkGpioBits.AA_GPIO_SCK) != 0)
{
Console.WriteLine("Read the SCK line as logic high");
}
else
{
Console.WriteLine("Read the SCK line as logic low");
}
// Optionally we can set passive pullups on certain lines.
// This can prevent input lines from floating. The pullup
// configuration is only valid for lines configured as inputs.
// If the line is not currently input the requested pullup
// state will take effect only if the line is later changed
// to be an input line.
AardvarkApi.aa_gpio_pullup(handle,
(byte)(AardvarkGpioBits.AA_GPIO_MISO | AardvarkGpioBits.AA_GPIO_MOSI));
// Now reading the MISO line should give a logic high,
// provided there is nothing attached to the Aardvark
// adapter that is driving the pin low.
val = (byte)AardvarkApi.aa_gpio_get(handle);
if ((val & (byte)AardvarkGpioBits.AA_GPIO_MISO) != 0)
{
Console.WriteLine(
"Read the MISO line as logic high (passive pullup)");
}
else
{
Console.WriteLine(
"Read the MISO line as logic low (is pin driven low?)");
}
// Now do a 1000 gets from the GPIO to test performance
for (int i = 0; i < 1000; ++i)
{
AardvarkApi.aa_gpio_get(handle);
}
int oldval, newval;
// Demonstrate use of aa_gpio_change
AardvarkApi.aa_gpio_direction(handle, 0x00);
oldval = AardvarkApi.aa_gpio_get(handle);
Console.WriteLine("Calling aa_gpio_change for 2 seconds...");
newval = AardvarkApi.aa_gpio_change(handle, 2000);
if (newval != oldval)
{
Console.WriteLine(" GPIO inputs changed.\n");
}
else
{
Console.WriteLine(" GPIO inputs did not change.\n");
}
// Turn on the I2C line pullups since we are done
AardvarkApi.aa_i2c_pullup(handle, AardvarkApi.AA_I2C_PULLUP_BOTH);
// Configure the Aardvark adapter back to SPI/I2C mode.
AardvarkApi.aa_configure(handle, AardvarkConfig.AA_CONFIG_SPI_I2C);
// Close the device
AardvarkApi.aa_close(handle);
}
