private void PolyfaceMeshFace_LayerChanged(PolyfaceMeshFace sender, TableObjectChangedEventArgs <Layer> e)
{
e.NewValue = this.OnPolyfaceMeshFaceLayerChangedEvent(e.OldValue, e.NewValue);
}
private IPolyline ReadPolyline(ref CodeValuePair code)
{
string handle = string.Empty;
Layer layer = Layer.Default;
AciColor color = AciColor.ByLayer;
LineType lineType = LineType.ByLayer;
PolylineTypeFlags flags = PolylineTypeFlags.OpenPolyline;
double elevation = 0.0;
float thickness = 0.0f;
Vector3d normal = Vector3d.UnitZ;
List<Vertex> vertexes = new List<Vertex>();
Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
//int numVertexes = -1;
//int numFaces = -1;
code = this.ReadCodePair();
while (code.Code != 0)
{
switch (code.Code)
{
case 5:
handle = code.Value;
code = this.ReadCodePair();
break;
case 8:
layer = this.GetLayer(code.Value);
code = this.ReadCodePair();
break;
case 62:
color = new AciColor(short.Parse(code.Value));
code = this.ReadCodePair();
break;
case 6:
lineType = this.GetLineType(code.Value);
code = this.ReadCodePair();
break;
case 30:
elevation = double.Parse(code.Value);
code = this.ReadCodePair();
break;
case 39:
thickness = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 70:
flags = (PolylineTypeFlags) (int.Parse(code.Value));
code = this.ReadCodePair();
break;
case 71:
//this field might not exist for polyface meshes, we cannot depend on it
//numVertexes = int.Parse(code.Value); code = this.ReadCodePair();
code = this.ReadCodePair();
break;
case 72:
//this field might not exist for polyface meshes, we cannot depend on it
//numFaces = int.Parse(code.Value);
code = this.ReadCodePair();
break;
case 210:
normal.X = double.Parse(code.Value);
code = this.ReadCodePair();
break;
case 220:
normal.Y = double.Parse(code.Value);
code = this.ReadCodePair();
break;
case 230:
normal.Z = double.Parse(code.Value);
code = this.ReadCodePair();
break;
case 1001:
XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
xData.Add(xDataItem.ApplicationRegistry, xDataItem);
break;
default:
if (code.Code >= 1000 && code.Code <= 1071)
throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
"The extended data of an entity must start with the application registry code " + this.fileLine);
code = this.ReadCodePair();
break;
}
}
//begin to read the vertex list
if (code.Value != DxfObjectCode.Vertex)
throw new DxfEntityException(DxfObjectCode.Polyline, this.file, "Vertex not found in line " + this.fileLine);
while (code.Value != StringCode.EndSequence)
{
if (code.Value == DxfObjectCode.Vertex)
{
Debug.Assert(code.Code == 0);
Vertex vertex = this.ReadVertex(ref code);
vertexes.Add(vertex);
}
}
// read the end end sequence object until a new element is found
if (code.Value != StringCode.EndSequence)
throw new DxfEntityException(DxfObjectCode.Polyline, this.file, "End sequence entity not found in line " + this.fileLine);
code = this.ReadCodePair();
string endSequenceHandle = string.Empty;
Layer endSequenceLayer = layer;
while (code.Code != 0)
{
switch (code.Code)
{
case 5:
endSequenceHandle = code.Value;
code = this.ReadCodePair();
break;
case 8:
endSequenceLayer = this.GetLayer(code.Value);
code = this.ReadCodePair();
break;
default:
code = this.ReadCodePair();
break;
}
}
IPolyline pol;
bool isClosed = false;
if ((flags & PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM) == PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM)
{
isClosed = true;
}
//to avoid possible error between the vertex type and the polyline type
//the polyline type will decide which information to use from the read vertex
if ((flags & PolylineTypeFlags.Polyline3D) == PolylineTypeFlags.Polyline3D)
{
List<Polyline3dVertex> polyline3dVertexes = new List<Polyline3dVertex>();
foreach (Vertex v in vertexes)
{
Polyline3dVertex vertex = new Polyline3dVertex
{
Color = v.Color,
Layer = v.Layer,
LineType = v.LineType,
Location = v.Location,
Handle = v.Handle
};
vertex.XData = v.XData;
polyline3dVertexes.Add(vertex);
}
////posible error avoidance, the polyline is marked as polyline3d code:(70,8) but the vertex is marked as PolylineVertex code:(70,0)
//if (v.Type == EntityType.PolylineVertex)
//{
// Polyline3dVertex polyline3dVertex = new Polyline3dVertex(((PolylineVertex)v).Location.X, ((PolylineVertex)v).Location.Y,0);
// polyline3dVertexes.Add(polyline3dVertex);
//}
//else
//{
// polyline3dVertexes.Add((Polyline3dVertex)v);
//}
//}
pol = new Polyline3d(polyline3dVertexes, isClosed)
{
Handle = handle
};
((Polyline3d) pol).EndSequence.Handle = endSequenceHandle;
((Polyline3d) pol).EndSequence.Layer = endSequenceLayer;
}
else if ((flags & PolylineTypeFlags.PolyfaceMesh) == PolylineTypeFlags.PolyfaceMesh)
{
//the vertex list created contains vertex and face information
List<PolyfaceMeshVertex> polyfaceVertexes = new List<PolyfaceMeshVertex>();
List<PolyfaceMeshFace> polyfaceFaces = new List<PolyfaceMeshFace>();
foreach (Vertex v in vertexes)
{
if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh)) == (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh))
{
PolyfaceMeshVertex vertex = new PolyfaceMeshVertex
{
Color = v.Color,
Layer = v.Layer,
LineType = v.LineType,
Location = v.Location,
Handle = v.Handle
};
vertex.XData = xData;
polyfaceVertexes.Add(vertex);
}
else if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex)) == (VertexTypeFlags.PolyfaceMeshVertex))
{
PolyfaceMeshFace vertex = new PolyfaceMeshFace
{
Color = v.Color,
Layer = v.Layer,
LineType = v.LineType,
VertexIndexes = v.VertexIndexes,
Handle = v.Handle
};
vertex.XData = xData;
polyfaceFaces.Add(vertex);
}
//if (v.Type == EntityType.PolyfaceMeshVertex)
//{
// polyfaceVertexes.Add((PolyfaceMeshVertex) v);
//}
//else if (v.Type == EntityType.PolyfaceMeshFace)
//{
// polyfaceFaces.Add((PolyfaceMeshFace) v);
//}
//else
//{
// throw new EntityDxfException(v.Type.ToString(), this.file, "Error in vertex type.");
//}
}
pol = new PolyfaceMesh(polyfaceVertexes, polyfaceFaces)
{
Handle = handle
};
((PolyfaceMesh) pol).EndSequence.Handle = endSequenceHandle;
((PolyfaceMesh) pol).EndSequence.Layer = endSequenceLayer;
}
else
{
List<PolylineVertex> polylineVertexes = new List<PolylineVertex>();
foreach (Vertex v in vertexes)
{
PolylineVertex vertex = new PolylineVertex
{
Location = new Vector2d(v.Location.X, v.Location.Y),
BeginThickness = v.BeginThickness,
Bulge = v.Bulge,
Color = v.Color,
EndThickness = v.EndThickness,
Layer = v.Layer,
LineType = v.LineType,
Handle = v.Handle
};
vertex.XData = xData;
////posible error avoidance, the polyline is marked as polyline code:(70,0) but the vertex is marked as Polyline3dVertex code:(70,32)
//if (v.Type==EntityType.Polyline3dVertex)
//{
// PolylineVertex polylineVertex = new PolylineVertex(((Polyline3dVertex)v).Location.X, ((Polyline3dVertex)v).Location.Y);
// polylineVertexes.Add(polylineVertex);
//}
//else
//{
// polylineVertexes.Add((PolylineVertex) v);
//}
polylineVertexes.Add(vertex);
}
pol = new Polyline(polylineVertexes, isClosed)
{
Thickness = thickness,
Elevation = elevation,
Normal = normal,
Handle = handle
};
((Polyline) pol).EndSequence.Handle = endSequenceHandle;
((Polyline) pol).EndSequence.Layer = endSequenceLayer;
}
pol.Color = color;
pol.Layer = layer;
pol.LineType = lineType;
pol.XData = xData;
return pol;
}
private EntityObject ReadPolyline()
{
// the entity Polyline in dxf can actually hold three kinds of entities
// 3d polyline is the generic polyline
// polyface mesh
// polylines 2d is the old way of writing polylines the AutoCAD2000 and newer always use LwPolylines to define a 2d polyline
// this way of reading 2d polylines is here for compatibility reasons with older dxf versions.
PolylinetypeFlags flags = PolylinetypeFlags.OpenPolyline;
PolylineSmoothType smoothType = PolylineSmoothType.NoSmooth;
double elevation = 0.0;
double thickness = 0.0;
Vector3 normal = Vector3.UnitZ;
List<Vertex> vertexes = new List<Vertex>();
List<XData> xData = new List<XData>();
this.chunk.Next();
while (this.chunk.Code != 0)
{
switch (this.chunk.Code)
{
case 30:
elevation = this.chunk.ReadDouble();
this.chunk.Next();
break;
case 39:
thickness = this.chunk.ReadDouble();
this.chunk.Next();
break;
case 70:
flags = (PolylinetypeFlags) this.chunk.ReadShort();
this.chunk.Next();
break;
case 75:
smoothType = (PolylineSmoothType) this.chunk.ReadShort();
this.chunk.Next();
break;
case 71:
//this field might not exist for polyface meshes, we cannot depend on it
//numVertexes = int.Parse(code.Value); code = this.ReadCodePair();
this.chunk.Next();
break;
case 72:
//this field might not exist for polyface meshes, we cannot depend on it
this.chunk.Next();
break;
case 210:
normal.X = this.chunk.ReadDouble();
this.chunk.Next();
break;
case 220:
normal.Y = this.chunk.ReadDouble();
this.chunk.Next();
break;
case 230:
normal.Z = this.chunk.ReadDouble();
this.chunk.Next();
break;
case 1001:
string appId = this.DecodeEncodedNonAsciiCharacters(this.chunk.ReadString());
XData data = this.ReadXDataRecord(this.GetApplicationRegistry(appId));
xData.Add(data);
break;
default:
if (this.chunk.Code >= 1000 && this.chunk.Code <= 1071)
throw new Exception("The extended data of an entity must start with the application registry code.");
this.chunk.Next();
break;
}
}
//begin to read the vertex list (although it is not recommended the vertex list might have 0 entries)
while (this.chunk.ReadString() != DxfObjectCode.EndSequence)
{
if (this.chunk.ReadString() == DxfObjectCode.Vertex)
{
Vertex vertex = this.ReadVertex();
vertexes.Add(vertex);
}
}
// read the end sequence object until a new element is found
this.chunk.Next();
string endSequenceHandle = null;
while (this.chunk.Code != 0)
{
switch (this.chunk.Code)
{
case 5:
endSequenceHandle = this.chunk.ReadHex();
this.chunk.Next();
break;
case 8:
// the polyline EndSequence layer should be the same as the polyline layer
this.chunk.Next();
break;
default:
this.chunk.Next();
break;
}
}
EntityObject pol;
bool isClosed = flags.HasFlag(PolylinetypeFlags.ClosedPolylineOrClosedPolygonMeshInM);
//to avoid possible error between the vertex type and the polyline type
//the polyline type will decide which information to use from the read vertex
if (flags.HasFlag(PolylinetypeFlags.Polyline3D))
{
List<PolylineVertex> polyline3dVertexes = new List<PolylineVertex>();
foreach (Vertex v in vertexes)
{
PolylineVertex vertex = new PolylineVertex
{
Flags = v.Flags,
Position = v.Position,
Handle = v.Handle,
};
polyline3dVertexes.Add(vertex);
}
pol = new Polyline(polyline3dVertexes, isClosed)
{
Flags = flags,
SmoothType = smoothType,
Normal = normal
};
((Polyline) pol).EndSequence.Handle = endSequenceHandle;
}
else if (flags.HasFlag(PolylinetypeFlags.PolyfaceMesh))
{
//the vertex list created contains vertex and face information
List<PolyfaceMeshVertex> polyfaceVertexes = new List<PolyfaceMeshVertex>();
List<PolyfaceMeshFace> polyfaceFaces = new List<PolyfaceMeshFace>();
foreach (Vertex v in vertexes)
{
if (v.Flags.HasFlag(VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh))
{
PolyfaceMeshVertex vertex = new PolyfaceMeshVertex
{
Location = v.Position,
Handle = v.Handle,
};
polyfaceVertexes.Add(vertex);
}
else if (v.Flags.HasFlag(VertexTypeFlags.PolyfaceMeshVertex))
{
PolyfaceMeshFace vertex = new PolyfaceMeshFace(v.VertexIndexes)
{
Handle = v.Handle
};
polyfaceFaces.Add(vertex);
}
}
pol = new PolyfaceMesh(polyfaceVertexes, polyfaceFaces)
{
Normal = normal
};
((PolyfaceMesh) pol).EndSequence.Handle = endSequenceHandle;
}
else
{
List<LwPolylineVertex> polylineVertexes = new List<LwPolylineVertex>();
foreach (Vertex v in vertexes)
{
LwPolylineVertex vertex = new LwPolylineVertex
{
Position = new Vector2(v.Position.X, v.Position.Y),
StartWidth = v.StartWidth,
Bulge = v.Bulge,
EndWidth = v.EndWidth,
};
polylineVertexes.Add(vertex);
}
pol = new LwPolyline(polylineVertexes, isClosed)
{
Flags = flags,
Thickness = thickness,
Elevation = elevation,
Normal = normal,
};
}
pol.XData.AddRange(xData);
return pol;
}