public Result <int> UpdateTzProjectPolit(Epm_TzProjectPolit model)
{
Result <int> result = new Result <int>();
try
{
var Poli = DataOperateBusiness <Epm_TzProjectPolit> .Get().Single(p => p.Id == model.Id);
SetCurrentUser(model);
#region 协同接口
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
ProjectApprovalApplyView view = new ProjectApprovalApplyView();
view.txt_xmmc = model.ProjectName;
if (model.CompanyId != null)
{
var company = DataOperateBasic <Base_Company> .Get().GetModel(model.CompanyId.Value);
if (company == null)
{
throw new Exception("未获取到申请单位信息！");
}
view.sub_sqdw = company.ObjeId;
}
else
{
throw new Exception("请选择申请单位！");
}
view.date_kgrq = string.Format("{0:yyyy-MM-dd}", model.StartDate);
view.date_jgrq = string.Format("{0:yyyy-MM-dd}", model.EndDate);
view.date_ysrq = string.Format("{0:yyyy-MM-dd}", model.AcceptDate);
view.date_zgrq = string.Format("{0:yyyy-MM-dd}", model.RectFinishDate);
view.date_jssj = string.Format("{0:yyyy-MM-dd}", model.FinalDate);
view.date_sjsj = string.Format("{0:yyyy-MM-dd}", model.AuditDate);
view.txts_zlsfqq = model.FullFiles;
view.txt_ysyj = model.AcceptOpinion;
view.date_sqrq = string.Format("{0:yyyy-MM-dd}", DateTime.Now);
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(model.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
view.file_fj = "";
if (model.TzAttachs.Count > 0)
{
//foreach (var item in model.TzAttachs)
//{
// switch (item.TypeNo)
// {
// case "SBJJ": // 销售企业二级单位验收主要事项表
// view.file_fj = XtWorkFlowService.GetXtAttachPaht(item.FilePath);
// break;
// case "SGSC": // 施工转生产界面交接确认单
// view.file_sgdw = XtWorkFlowService.GetXtAttachPaht(item.FilePath);
// break;
// case "GCJJ": // 工程交接证书
// view.file_gcjjzs = XtWorkFlowService.GetXtAttachPaht(item.FilePath);
// break;
// default:
// break;
// }
//}
//销售企业二级单位验收主要事项表
var sxbTemp = model.TzAttachs.Where(p => p.TypeNo == "KGSQXSQYEJ").ToList();
view.file_fj = XtWorkFlowSubmitService.CreateXtAttachPath(sxbTemp);
//施工转生产界面交接确认单
var qrdTemp = model.TzAttachs.Where(p => p.TypeNo == "KGSQSGZSCJM").ToList();
view.file_fj = XtWorkFlowSubmitService.CreateXtAttachPath(qrdTemp);
//工程交接证书
var jjzsTemp = model.TzAttachs.Where(p => p.TypeNo == "KGSQGCJJZS").ToList();
view.file_fj = XtWorkFlowSubmitService.CreateXtAttachPath(jjzsTemp);
}
model.WorkFlowId = XtWorkFlowService.CreateApplyWorkFlow(view);
}
#endregion
var rows = DataOperateBusiness <Epm_TzProjectPolit> .Get().Update(model);
//上传附件
AddFilesBytzTable(model, model.TzAttachs);
result.Data = rows;
result.Flag = EResultFlag.Success;
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "UpdateTzConDrawing");
}
return(result);
}
///<summary>
///修改:
///</summary>
/// <param name="model">要修改的model</param>
/// <returns>受影响的行数</returns>
public Result <int> UpdateTzTenderingApply(Epm_TzTenderingApply model)
{
Result <int> result = new Result <int>();
try
{
SetCurrentUser(model);
//上传附件
AddFilesBytzTable(model, model.TzAttachs);
#region 招标申请协同接口
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
XtTzTenderingApplyView view = new XtTzTenderingApplyView();
view.ProjectName = model.ProjectName;
view.UndertakeDepartment = model.UndertakeDepartment;
view.UndertakeContacts = model.UndertakeContacts;
view.UndertakeTel = model.UndertakeTel;
view.Minutes = model.ApprovalNo;
view.TenderingName = model.TenderingName;
view.TenderingType = model.TenderingType;
view.BidName = model.BidName;
view.CapitalBudget = model.CapitalBudget;
view.ProjectSummary = model.ProjectSummary;
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(model.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
// string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// //string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// //view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
// string fileUrl = XtWorkFlowService.GetXtAttachPaht(item.FilePath);
// view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
//}
//if (view.Temp_TzAttachs != null)
//{
// view.Temp_TzAttachs = view.Temp_TzAttachs.Substring(0, view.Temp_TzAttachs.Length - 1);
//}
view.Temp_TzAttachs = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
model.WorkFlowId = XtWorkFlowService.CreateTzTenderingApplyWorkFlow(view);
}
#endregion
var rows = DataOperateBusiness <Epm_TzTenderingApply> .Get().Update(model);
result.Data = rows;
result.Flag = EResultFlag.Success;
//WriteLog(AdminModule.TzTenderingApply.GetText(), SystemRight.Modify.GetText(), "修改: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "UpdateTzTenderingApply");
}
return(result);
}
///<summary>
///添加:
///</summary>
/// <param name="model">要添加的model</param>
/// <returns>受影响的行数</returns>
public Result <int> AddMeetingFileReport(Epm_MeetingFileReport model)
{
Result <int> result = new Result <int>();
try
{
int rows = 0;
bool isAdd = false;
var meeting = DataOperateBusiness <Epm_MeetingFileReport> .Get().GetList(t => t.ProjectId == model.ProjectId && t.State != (int)PreProjectState.ApprovalFailure && t.State != (int)PreProjectState.Discarded).FirstOrDefault();
if (meeting == null)
{
isAdd = true;
meeting = new Epm_MeetingFileReport();
SetCreateUser(meeting);
}
meeting.ProjectId = model.ProjectId;
meeting.State = model.State;
SetCurrentUser(meeting);
//上传附件
AddFilesBytzTable(meeting, model.TzAttachs);
var projectInfo = DataOperateBusiness <Epm_TzProjectProposal> .Get().GetModel(model.ProjectId);
//特许经营项目性质的项目审批到项目批复完成就结束了，不生成工程模块的内容，不用写到机器人表里
if (projectInfo.Nature != "XMXZTXJY")
{
#region 会材料上报流程申请
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
TzMeetingFileReportWorkFlowView view = new TzMeetingFileReportWorkFlowView();
var project = DataOperateBusiness <Epm_TzProjectProposal> .Get().GetModel(model.ProjectId);
view.ProjectName = project.ProjectName;
view.StationName = project.StationName;
view.NatureName = project.NatureName;
view.Position = project.Position;
view.ApplyTime = string.Format("{0:yyyy-MM-dd}", project.ApplyTime);
view.CompanyName = project.CompanyName;
view.PredictMoney = project.PredictMoney.ToString();
view.OilSalesTotal = project.OilSalesTotal.ToString();
view.CNGY = model.CNG.ToString();
view.LNGQ = model.LNG.ToString();
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(meeting.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
//}
//if (view.Temp_TzAttachs != null)
//{
// view.Temp_TzAttachs = view.Temp_TzAttachs.Substring(0, view.Temp_TzAttachs.Length - 1);
//}
view.Temp_TzAttachs = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
meeting.WorkFlowId = XtWorkFlowService.CreateMeetingFileReportWorkFlow(view);
}
#endregion
}
if (isAdd)
{
rows = DataOperateBusiness <Epm_MeetingFileReport> .Get().Add(meeting);
}
else
{
rows = DataOperateBusiness <Epm_MeetingFileReport> .Get().Update(meeting);
}
result.Data = rows;
result.Flag = EResultFlag.Success;
//WriteLog(AdminModule.MeetingFileReport.GetText(), SystemRight.Add.GetText(), "新增: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "AddMeetingFileReport");
}
return(result);
}
///<summary>
///添加:
///</summary>
/// <param name="model">要添加的model</param>
/// <returns>受影响的行数</returns>
public Result <int> AddTzPeopleChgApply(Epm_TzPeopleChgApply model)
{
Result <int> result = new Result <int>();
try
{
model = SetCurrentUser(model);
model = SetCreateUser(model);
#region 建设工程项目管理人员变更申请流程
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectApprovalState.WaitApproval && XtWorkFlow == "1")
{
TzPeopleChgApplyView view = new TzPeopleChgApplyView();
if (model.ApplicantId != null)
{
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(model.ApplicantId.Value);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
}
if (model.DepartmentId != null)
{
var company = DataOperateBasic <Base_Company> .Get().GetModel(model.DepartmentId.Value);
if (company == null)
{
throw new Exception("未获取到申请部门信息！");
}
view.dep_sqbm = company.ObjeId;
}
else
{
throw new Exception("请选择申请部门！");
}
if (model.CompanyId != null)
{
var company = DataOperateBasic <Base_Company> .Get().GetModel(model.CompanyId.Value);
if (company == null)
{
throw new Exception("未获取到申请单位信息！");
}
view.sub_sqdw = company.ObjeId;
}
else
{
throw new Exception("请选择申请单位！");
}
view.date_sqrq = string.Format("{0:yyyy-MM-dd}", DateTime.Now);
view.txt_xmmc = model.ProjectName;
view.txt_jsdz = model.ConstructionAddress;
view.sub_sgdw = model.WorkUnit;
view.txt_fzr = model.Leader;
if (model.LeaderId != null)
{
var baseUserHeaderID = DataOperateBasic <Base_User> .Get().GetModel(model.LeaderId.Value);
if (baseUserHeaderID == null)
{
throw new Exception("未找到分管领导相关信息！");
}
view.hr_fgld = baseUserHeaderID.ObjeId;
}
if (model.DepLeaderId != null)
{
var baseUserLeaderID = DataOperateBasic <Base_User> .Get().GetModel(model.DepLeaderId.Value);
if (baseUserLeaderID == null)
{
throw new Exception("未找到部门负责人相关信息！");
}
view.hr_bmfzr = baseUserLeaderID.ObjeId;
}
//明细表信息
if (model.TzPeopleChgApplyItem != null && model.TzPeopleChgApplyItem.Any())
{
view.list = new List <TzPeopleChgApplyView.TzPeopleChgApplyItem>();
foreach (var temp in model.TzPeopleChgApplyItem)
{
TzPeopleChgApplyView.TzPeopleChgApplyItem itemview = new TzPeopleChgApplyView.TzPeopleChgApplyItem();
itemview.txt_bgqzyzsmc = temp.ChgCertiNameBefore;
itemview.txt_bghzyzsmc = temp.ChgCertiNameAfter;
itemview.txt_bggw = temp.ChgPost;
itemview.txt_bgqry = temp.ChgPeopleBefore;
itemview.txt_bghry = temp.ChgPeopleAfter;
itemview.txt_bgqzyzsh = temp.ChgCertiNoBefore;
itemview.txt_bghzyzsh = temp.ChgCertiNoAfter;
view.list.Add(itemview);
}
}
//附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// switch (item.TypeNo)
// {
// case "RYBGFJ":
// view.fj = fileUrl + '|' + view.fj; ;
// break;
// default:
// break;
// }
//}
//if (view.fj != null)
//{
// view.fj = view.fj.Substring(view.fj.Length - 1);
//}
var fileList = model.TzAttachs.Where(p => p.TypeNo == "RYBGFJ").ToList();
view.fj = XtWorkFlowSubmitService.CreateXtAttachPath(fileList);
}
model.WorkFlowId = XtWorkFlowService.CreateTzPeopleChgApplyWorkFlow(view);
}
#endregion
var rows = DataOperateBusiness <Epm_TzPeopleChgApply> .Get().Add(model);
if (model.TzPeopleChgApplyItem != null && model.TzPeopleChgApplyItem.Any())
{
model.TzPeopleChgApplyItem.ForEach(item =>
{
item.ChangeApplyId = model.Id;
item = SetCurrentUser(item);
item = SetCreateUser(item);
});
DataOperateBusiness <Epm_TzPeopleChgApplyItem> .Get().AddRange(model.TzPeopleChgApplyItem);
}
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
AddFilesBytzTable(model, model.TzAttachs);
}
result.Data = rows;
result.Flag = EResultFlag.Success;
//WriteLog(AdminModule.TzPeopleChgApply.GetText(), SystemRight.Add.GetText(), "新增: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "AddTzPeopleChgApply");
}
return(result);
}
///<summary>
///添加:
///</summary>
/// <param name="model">要添加的model</param>
/// <returns>受影响的行数</returns>
public Result <int> AddTzDesiginChangeApply(Epm_TzDesiginChangeApply model)
{
Result <int> result = new Result <int>();
try
{
#region 建设工程设计变更申请流程
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.ApprovalSuccess && XtWorkFlow == "1")
{
TzDesiginChangeApplyApprovalView view = new TzDesiginChangeApplyApprovalView();
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(model.ApplicantID.Value);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
if (model.UnitID != null)
{
var company = DataOperateBasic <Base_Company> .Get().GetModel(model.UnitID.Value);
if (company == null)
{
throw new Exception("未获取到申请单位信息！");
}
view.sub_sqdw = company.ObjeId;
}
else
{
throw new Exception("请选择申请单位！");
}
view.hr_sqr = baseUser.ObjeId;
view.date_sqrq = string.Format("{0:yyyy-MM-dd}", DateTime.Now);
view.txt_gcmc = model.ProjectName;
view.int_htzj = model.InvestmentCost.ToString();
view.int_bgzj = model.ChangeCost.ToString();
//view.sub_jswd = model.ConstructionUnit;
if (model.ConstructionUnitID != null)
{
var company = DataOperateBasic <Base_Company> .Get().GetModel(model.ConstructionUnitID.Value);
if (company == null)
{
throw new Exception("未获取到申请单位信息！");
}
view.sub_jswd = company.ObjeId;
}
else
{
throw new Exception("请选择申请单位！");
}
if (model.DepartmentID != null)
{
var company = DataOperateBasic <Base_Company> .Get().GetModel(model.DepartmentID.Value);
if (company == null)
{
throw new Exception("未获取到申请部门信息！");
}
view.dep_sqmb = company.ObjeId;
}
else
{
throw new Exception("请选择申请部门！");
}
view.txt_lxdh = model.ConstructionUnitPeople;
view.txt_sgdw = model.WorkUnit;
view.txt_sgdwlxdh = model.WorkUnitPeople;
view.txt_jldw = model.SupervisionUnit;
view.txt_jldwlxf = model.SupervisionUnitPeople;
view.txt_sjdw = model.DesignUnit;
view.txt_sjdwlxdh = model.DesignUnitPeople;
view.txt_bgdyy = model.ChangeCause;
view.txt_bgdnr = model.ChangeContent;
view.txt_gcljgc = model.ProjectChange;
view.txt_bgdgq = model.Impact;
if (model.HeaderID != null)
{
var baseUserHeaderID = DataOperateBasic <Base_User> .Get().GetModel(model.HeaderID.Value);
if (baseUserHeaderID == null)
{
throw new Exception("未找到部门负责人相关信息！");
}
view.hr_bmfzr = baseUserHeaderID.ObjeId;
}
if (model.LeaderID != null)
{
var baseUserLeaderID = DataOperateBasic <Base_User> .Get().GetModel(model.LeaderID.Value);
if (baseUserLeaderID == null)
{
throw new Exception("未找到分管领导相关信息！");
}
view.hr_fgld = baseUserLeaderID.ObjeId;
}
//附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// switch (item.TypeNo)
// {
// case "JSSQBG":
// view.fj = fileUrl + '|' + view.fj; ;
// break;
// default:
// break;
// }
//}
//if (view.fj != null)
//{
// view.fj = view.fj.Substring(view.fj.Length - 1);
//}
view.fj = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
model.WorkFlowId = XtWorkFlowService.CreateTzChangeApplyWorkFlow(view);
}
#endregion
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
AddFilesBytzTable(model, model.TzAttachs);
}
SetCreateUser(model);
SetCurrentUser(model);
model.ApprovalNameId = model.CreateUserId;
model.ApprovalName = model.CreateUserName;
var rows = DataOperateBusiness <Epm_TzDesiginChangeApply> .Get().Add(model);
result.Data = rows;
result.Flag = EResultFlag.Success;
//WriteLog(AdminModule.TzDesiginChangeApply.GetText(), SystemRight.Add.GetText(), "新增: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "AddTzDesiginChangeApply");
}
return(result);
}
///<summary>
///修改:
///</summary>
/// <param name="model">要修改的model</param>
/// <returns>受影响的行数</returns>
public Result <int> UpdateMeetingFileReport(Epm_MeetingFileReport model)
{
Result <int> result = new Result <int>();
try
{
#region 会材料上报流程申请 暂时注释 勿删！！！
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
TzMeetingFileReportWorkFlowView view = new TzMeetingFileReportWorkFlowView();
var project = DataOperateBusiness <Epm_TzProjectProposal> .Get().GetModel(model.ProjectId);
view.ProjectName = project.ProjectName;
view.StationName = project.StationName;
view.NatureName = project.NatureName;
view.Position = project.Position;
view.ApplyTime = project.ApplyTime.ToString();
view.CompanyName = project.CompanyName;
view.PredictMoney = project.ProjectCode;
view.OilSalesTotal = project.OilSalesTotal.ToString();
view.CNGY = model.CNG.ToString();
view.LNGQ = model.LNG.ToString();
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(model.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// //string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// //view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
// string fileUrl = XtWorkFlowService.GetXtAttachPaht(item.FilePath);
// view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
//}
//if (view.Temp_TzAttachs != null)
//{
// view.Temp_TzAttachs = view.Temp_TzAttachs.Substring(0, view.Temp_TzAttachs.Length - 1);
//}
view.Temp_TzAttachs = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
model.WorkFlowId = XtWorkFlowService.CreateMeetingFileReportWorkFlow(view);
}
#endregion
var rows = DataOperateBusiness <Epm_MeetingFileReport> .Get().Update(model);
result.Data = rows;
result.Flag = EResultFlag.Success;
//WriteLog(AdminModule.MeetingFileReport.GetText(), SystemRight.Modify.GetText(), "修改: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "UpdateMeetingFileReport");
}
return(result);
}
///<summary>
///添加:项目评审记录
///</summary>
/// <param name="model">要添加的model</param>
/// <returns>受影响的行数</returns>
public Result <int> AddTzProjectReveiews(Epm_TzProjectReveiews model)
{
Result <int> result = new Result <int>();
try
{
int rows = 0;
bool isAdd = false;
var reveiews = DataOperateBusiness <Epm_TzProjectReveiews> .Get().GetList(t => t.ProjectId == model.ProjectId && t.State != (int)PreProjectState.ApprovalFailure && t.State != (int)PreProjectState.Discarded).FirstOrDefault();
if (reveiews == null)
{
isAdd = true;
reveiews = new Epm_TzProjectReveiews();
SetCreateUser(reveiews);
}
reveiews.ProjectId = model.ProjectId;
reveiews.ReveiewDate = model.ReveiewDate;
reveiews.HostUser = model.HostUser;
reveiews.Address = model.Address;
reveiews.ConclusionCode = model.ConclusionCode;
reveiews.ConclusionName = model.ConclusionName;
reveiews.OtherInfo = model.OtherInfo;
reveiews.InvitedExperts = model.InvitedExperts;
reveiews.Attendees = model.Attendees;
reveiews.PerfectContent = model.PerfectContent;
reveiews.State = model.State;
SetCurrentUser(reveiews);
//上传附件
AddFilesBytzTable(reveiews, model.TzAttachs);
var projects = DataOperateBusiness <Epm_TzProjectProposal> .Get().GetModel(model.ProjectId);
//特许经营项目性质的项目审批到项目批复完成就结束了，不生成工程模块的内容，不用写到机器人表里
if (projects.Nature != "XMXZTXJY")
{
#region 项目评审记录流程申请 暂时注释 勿删！！！
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
TzProjectReveiewsWorkFlowView view = new TzProjectReveiewsWorkFlowView();
var subjects = DataOperateBasic <Base_TypeDictionary> .Get().GetList(t => t.Type == DictionaryType.OtherInfo.ToString()).ToList();
string str = "";
foreach (var item in subjects)
{
if (subjects.Where(t => model.OtherInfo.Contains(t.No)).Any())
{
str = str + item.Name + ",";
}
}
str = str.Substring(0, str.Length - 1);
view.ProjectName = projects.ProjectName;
view.StationName = projects.StationName;
view.NatureName = projects.NatureName;
view.Position = projects.Position;
view.ApplyTime = projects.ApplyTime.ToString();
view.CompanyName = projects.CompanyName;
view.PredictMoney = projects.PredictMoney.ToString();
view.ReveiewDate = model.ReveiewDate.ToString();
view.HostUser = model.HostUser;
view.Attendees = model.Attendees;
view.ConclusionName = model.ConclusionName;
view.OtherInfo = str;
view.Address = model.Address;
view.PerfectContent = model.PerfectContent;
view.InvitedExperts = model.InvitedExperts;
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(reveiews.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
//}
//if (view.Temp_TzAttachs != null)
//{
// view.Temp_TzAttachs = view.Temp_TzAttachs.Substring(0, view.Temp_TzAttachs.Length - 1);
//}
view.Temp_TzAttachs = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
reveiews.WorkFlowId = XtWorkFlowService.CreateProjectReveiewsWorkFlow(view);
}
#endregion
}
if (isAdd)
{
rows = DataOperateBusiness <Epm_TzProjectReveiews> .Get().Add(reveiews);
}
else
{
rows = DataOperateBusiness <Epm_TzProjectReveiews> .Get().Update(reveiews);
}
result.Data = rows;
result.Flag = EResultFlag.Success;
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "AddTzProjectReveiews");
}
return(result);
}
///<summary>
///添加:
///</summary>
/// <param name="model">要添加的model</param>
/// <returns>受影响的行数</returns>
public Result <int> AddTzDesignScheme(Epm_TzDesignScheme model)
{
Result <int> result = new Result <int>();
try
{
int rows = 0;
bool isAdd = false;
//根据批复信息自动生成一条方案信息，如果已经存在==修改
var reveiews = DataOperateBusiness <Epm_TzDesignScheme> .Get().GetList(t => t.ProjectId == model.ProjectId && t.State != (int)PreProjectApprovalState.ApprovalFailure && t.State != (int)PreProjectApprovalState.Closed).FirstOrDefault();
#region receiews
if (reveiews == null)//没有-新增
{
isAdd = true;
reveiews = new Epm_TzDesignScheme();
SetCreateUser(reveiews);
}
///所属项目ID
reveiews.ProjectId = model.ProjectId;
///项目编码
reveiews.ProjectCode = model.ProjectCode;
///项目名称
reveiews.ProjectName = model.ProjectName;
///项目批复号
reveiews.ApprovalNo = model.ApprovalNo;
///项目性质（数据字典）
reveiews.Nature = model.Nature;
///项目性质名称
reveiews.NatureName = model.NatureName;
///项目提出日期（冗余）
reveiews.ApplyTime = model.ApplyTime;
//库站ID
reveiews.StationId = model.StationId;
///库站协同编码
reveiews.StationCodeXt = model.StationCodeXt;
///库站名称
reveiews.StationName = model.StationName;
///地市公司ID
reveiews.CompanyId = model.CompanyId;
///地市公司协同编码
reveiews.CompanyCodeXt = model.CompanyCodeXt;
///地市公司名称
reveiews.CompanyName = model.CompanyName;
///初步设计单位
reveiews.DesignUnit = model.DesignUnit;
///示范/标注数据字典编码
reveiews.StandarCode = model.StandarCode;
///示范名称
reveiews.StandarName = model.StandarName;
///上报概算
reveiews.Estimate = model.Estimate;
///总工程费用（冗余）
reveiews.TotalInvestment = model.TotalInvestment;
///其它工程费用（冗余）
reveiews.OtheInvestment = model.OtheInvestment;
///设计单位招标日期
reveiews.InviteTime = model.InviteTime;
///设计单位负责人
reveiews.DesignUnitCharge = model.DesignUnitCharge;
//设计单位负责人职务
reveiews.DesignJob = model.DesignJob;
///项目经理（冗余）
reveiews.ProjectManager = model.ProjectManager;
///项目经理职务（冗余）
reveiews.ProjectJob = model.ProjectJob;
///占地面积
reveiews.LandArea = model.LandArea;
///加油机（台）
reveiews.MachineofOilStage = model.MachineofOilStage;
///加气机（台）
reveiews.MachineofGasStage = model.MachineofGasStage;
///储气机
reveiews.GasWells = model.GasWells;
///油罐
reveiews.OilTank = model.OilTank;
///罩棚面积（冗余）
reveiews.Shelter = model.Shelter;
///站房面积（冗余）
reveiews.StationRoom = model.StationRoom;
///便利店面积--暂时没有
reveiews.ConvenienceRoom = model.ConvenienceRoom;
///批复概算投资（冗余）
reveiews.ReleaseInvestmentAmount = model.ReleaseInvestmentAmount;
///其他工程内容
reveiews.OtherProject = model.OtherProject;
///项目信息是否同步：是、否
reveiews.IsSynchro = model.IsSynchro;
///状态：暂存、待审核、审批通过、不通过
reveiews.State = model.State;
///工程费用
reveiews.EngineeringCost = model.EngineeringCost;
///其它费用
reveiews.OtherExpenses = model.OtherExpenses;
///土地费用
reveiews.LandCosts = model.LandCosts;
///估算投资
reveiews.PredictMoney = model.PredictMoney;
///地区公司
reveiews.RegionCompany = model.RegionCompany;
//项目类型
reveiews.ProjectType = model.ProjectType;
#endregion
SetCurrentUser(reveiews);
#region 设计方案流程申请 暂时注释 勿删！！！
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
TzDesignSchemeWorkFlowView view = new TzDesignSchemeWorkFlowView();
view.ApprovalNo = model.ApprovalNo;
view.CompanyName = model.CompanyName;
view.ConvenienceRoom = model.ConvenienceRoom.ToString();
view.DesignJob = model.DesignJob;
view.DesignUnit = model.DesignUnit;
view.DesignUnitCharge = model.DesignUnitCharge;
view.Estimate = model.Estimate.ToString();
view.GasWells = model.GasWells.ToString();
view.InviteTime = string.Format("{0:yyyy-MM-dd}", model.InviteTime);
view.IsSynchro = model.IsSynchro;
view.LandArea = model.LandArea.ToString();
view.MachineofGasStage = model.MachineofGasStage.ToString();
view.MachineofOilStage = model.MachineofOilStage.ToString();
view.NatureName = model.NatureName;
view.OilTank = model.OilTank.ToString();
view.OtheInvestment = model.OtheInvestment.ToString();
view.OtherProject = model.OtherProject;
view.PredictMoney = model.PredictMoney.ToString();
view.ProjectCode = model.ProjectCode;
view.ProjectJob = model.ProjectJob;
view.ProjectManager = model.ProjectManager;
view.ProjectName = model.ProjectName;
view.ProvinceName = model.RegionCompany;
view.ReleaseInvestmentAmount = model.ReleaseInvestmentAmount.ToString();
view.Shelter = model.Shelter.ToString();
view.StandarName = model.StandarName;
view.StationName = model.StationName;
view.StationRoom = model.StationRoom.ToString();
view.StationTypeName = model.ProjectType;
view.TotalInvestment = model.TotalInvestment.ToString();
view.LandCosts = model.LandCosts.ToString();
view.EngineeringCost = model.EngineeringCost.ToString();
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(reveiews.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
//}
//if (view.Temp_TzAttachs != null)
//{
// view.Temp_TzAttachs = view.Temp_TzAttachs.Substring(0, view.Temp_TzAttachs.Length - 1);
//}
view.Temp_TzAttachs = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
reveiews.WorkFlowId = XtWorkFlowService.CreateDesignSchemeWorkFlow(view);
}
#endregion
if (isAdd)
{
rows = DataOperateBusiness <Epm_TzDesignScheme> .Get().Add(reveiews);
}
else
{
rows = DataOperateBusiness <Epm_TzDesignScheme> .Get().Update(reveiews);
}
//上传附件
AddFilesBytzTable(reveiews, model.TzAttachs);
result.Data = rows;
result.Flag = EResultFlag.Success;
// WriteLog(AdminModule.TzDesignScheme.GetText(), SystemRight.Add.GetText(), "新增: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "AddTzDesignScheme");
}
return(result);
}
///<summary>
///修改:
///</summary>
/// <param name="model">要修改的model</param>
/// <returns>受影响的行数</returns>
public Result <int> UpdateTzDesignScheme(Epm_TzDesignScheme model)
{
Result <int> result = new Result <int>();
try
{
var scheme = DataOperateBusiness <Epm_TzDesignScheme> .Get().Single(p => p.ProjectId == model.ProjectId);
if (scheme == null)
{
throw new Exception("修改的数据不存在或者已被删除！");
}
//生成设计方案信息
//scheme.ProjectId = model.ProjectId;
//scheme.ProjectCode = model.ProjectCode;
//scheme.ProjectName = model.ProjectName;
//scheme.ApprovalNo = model.ApprovalNo;
//scheme.Nature = model.Nature;
//scheme.NatureName = model.NatureName;
//scheme.ApplyTime = model.ApplyTime;
//scheme.StationId = model.StationId;
//scheme.StationCodeXt = model.StationCodeXt;
//scheme.StationName = model.StationName;
//scheme.CompanyId = model.CompanyId;
//scheme.CompanyCodeXt = model.CompanyCodeXt;
//scheme.CompanyName = model.CompanyName;
//scheme.PredictMoney = model.PredictMoney;
//scheme.DesignUnit = model.DesignUnit;
//scheme.StandarCode = model.StandarCode;
//scheme.StandarName = model.StandarName;
//scheme.Estimate = model.Estimate;
//scheme.TotalInvestment = model.TotalInvestment;
//scheme.OtheInvestment = model.OtheInvestment;
//scheme.InviteTime = model.InviteTime;
//scheme.DesignUnitCharge = model.DesignUnitCharge;
//scheme.DesignJob = model.DesignJob;
//scheme.ProjectManager = model.ProjectManager;
//scheme.ProjectJob = model.ProjectJob;
//scheme.ConvenienceRoom = model.ConvenienceRoom;
//scheme.ReleaseInvestmentAmount = model.ReleaseInvestmentAmount;
//scheme.OtherProject = model.OtherProject;
//scheme.IsSynchro = model.IsSynchro;
//scheme.EngineeringCost = model.EngineeringCost;
//scheme.OtherExpenses = model.OtherExpenses;
//scheme.LandCosts = model.LandCosts;
//scheme.RegionCompany = model.RegionCompany;
//scheme.ProjectType = model.ProjectType;
//scheme.LandArea = model.LandArea;//占地面积
//scheme.MachineofOilStage = model.MachineofOilStage;//加油机
//scheme.MachineofGasStage = model.MachineofGasStage;//加气机
//scheme.GasWells = model.GasWells;//储气井
//scheme.OilTank = model.OilTank;//油罐
//scheme.Shelter = model.Shelter;//罩棚面积
//scheme.StationRoom = model.StationRoom;//站房面积
//scheme.TotalInvestment = model.TotalInvestment;//批复概算投资
//scheme.ApprovalNo = model.ApprovalNo;//批复文号
SetCurrentUser(model);
//上传附件
AddFilesBytzTable(model, model.TzAttachs);
#region 设计方案流程申请 暂时注释 勿删！！！
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
TzDesignSchemeWorkFlowView view = new TzDesignSchemeWorkFlowView();
view.ApprovalNo = model.ApprovalNo;
view.CompanyName = model.CompanyName;
view.ConvenienceRoom = model.ConvenienceRoom.ToString();
view.DesignJob = model.DesignJob;
view.DesignUnit = model.DesignUnit;
view.DesignUnitCharge = model.DesignUnitCharge;
view.Estimate = model.Estimate.ToString();
view.GasWells = model.GasWells.ToString();
view.InviteTime = string.Format("{0:yyyy-MM-dd}", model.InviteTime);
view.IsSynchro = model.IsSynchro;
view.LandArea = model.LandArea.ToString();
view.MachineofGasStage = model.MachineofGasStage.ToString();
view.MachineofOilStage = model.MachineofOilStage.ToString();
view.NatureName = model.NatureName;
view.OilTank = model.OilTank.ToString();
view.OtheInvestment = model.OtheInvestment.ToString();
view.OtherProject = model.OtherProject;
view.PredictMoney = model.PredictMoney.ToString();
view.ProjectCode = model.ProjectCode;
view.ProjectJob = model.ProjectJob;
view.ProjectManager = model.ProjectManager;
view.ProjectName = model.ProjectName;
view.ProvinceName = model.RegionCompany;
view.ReleaseInvestmentAmount = model.ReleaseInvestmentAmount.ToString();
view.Shelter = model.Shelter.ToString();
view.StandarName = model.StandarName;
view.StationName = model.StationName;
view.StationRoom = model.StationRoom.ToString();
view.StationTypeName = model.ProjectType;
view.TotalInvestment = model.TotalInvestment.ToString();
view.LandCosts = model.LandCosts.ToString();
view.EngineeringCost = model.EngineeringCost.ToString();
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(model.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// //string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// //view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
// string fileUrl = XtWorkFlowService.GetXtAttachPaht(item.FilePath);
// view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
//}
//if (view.Temp_TzAttachs != null)
//{
// view.Temp_TzAttachs = view.Temp_TzAttachs.Substring(0, view.Temp_TzAttachs.Length - 1);
//}
view.Temp_TzAttachs = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
model.WorkFlowId = XtWorkFlowService.CreateDesignSchemeWorkFlow(view);
}
#endregion
var rows = DataOperateBusiness <Epm_TzDesignScheme> .Get().Update(model);
result.Data = rows;
result.Flag = EResultFlag.Success;
// WriteLog(AdminModule.TzDesignScheme.GetText(), SystemRight.Modify.GetText(), "修改: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "UpdateTzDesignScheme");
}
return(result);
}
///<summary>
///添加:
///</summary>
/// <param name="model">要添加的model</param>
/// <returns>受影响的行数</returns>
public Result <int> AddTzConDrawing(Epm_TzConDrawing model, List <Base_Files> baseEntity)
{
Result <int> result = new Result <int>();
try
{
int rows = 0;
bool isAdd = false;
var reveiews = DataOperateBusiness <Epm_TzConDrawing> .Get().GetList(t => t.ProjectId == model.ProjectId).FirstOrDefault();
var ApprovalInfo = DataOperateBusiness <Epm_TzProjectApprovalInfo> .Get().GetList(t => t.ProjectId == model.ProjectId).FirstOrDefault();
if (reveiews == null)
{
isAdd = true;
reveiews = new Epm_TzConDrawing();
//当前创建人
SetCreateUser(reveiews);
}
reveiews.ProjectId = model.ProjectId; //项目id
reveiews.ProjectCode = model.ProjectCode; //项目编码
reveiews.ProjectName = model.ProjectName; //项目名称
reveiews.ApprovalNo = model.ApprovalNo; //批复号
reveiews.Nature = model.Nature; //项目性质
reveiews.NatureName = model.NatureName; //项目性质名称
reveiews.ApplyTime = model.ApplyTime; //项目提出日期
reveiews.StationId = model.StationId; //站库id
reveiews.StationCodeXt = model.StationCodeXt; //站库协同编码
reveiews.StationName = model.StationName; //站库名称
reveiews.CompanyId = model.CompanyId; //地市公司id
reveiews.CompanyCodeXt = model.CompanyCodeXt; //地市公司协同编码
reveiews.CompanyName = model.CompanyName; //地市公司名称
reveiews.ReviewTime = model.ReviewTime; //评审日期
reveiews.Moderator = model.Moderator; //主持人
reveiews.ReviewAddress = model.ReviewAddress; //评审地点
reveiews.ReviewExperts = model.ReviewExperts; //评审专家
reveiews.Participants = model.Participants; //参会人员
reveiews.Conclusion = model.Conclusion; //评审结论
reveiews.State = model.State; //状态
reveiews.Remark = model.Remark; //备注
reveiews.DrawingId = model.DrawingId; //图纸id
reveiews.ProjectDrawingID = model.ProjectDrawingID; //施工项目id
//当前操作人
SetCurrentUser(reveiews);
//上传附件
AddFilesBytzTable(reveiews, model.TzAttachs);
#region 施工图纸会审流程申请 暂时注释 勿删！！！
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
TzConDrawingWorkFlowView view = new TzConDrawingWorkFlowView();
view.CompanyName = model.CompanyName;
view.Conclusion = model.CompanyName;
view.Moderator = model.Moderator;
view.NatureName = model.NatureName;
view.Participants = model.Participants;
view.PredictMoney = "";
view.ProjectCode = model.ProjectCode;
view.ProjectName = model.ProjectName;
view.ProvinceName = model.CompanyName;
view.ReviewAddress = model.ReviewAddress;
view.ReviewExperts = model.ReviewExperts;
view.ReviewTime = model.ReviewTime.ToString();
view.StationName = model.StationName;
view.StationTypeName = model.Nature;
view.LandCosts = ApprovalInfo.LandCosts.ToString();
view.OtherExpenses = ApprovalInfo.OtherExpenses.ToString();
view.EngineeringCost = ApprovalInfo.EngineeringCost.ToString();
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(reveiews.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
view.hr_sqr = baseUser.ObjeId;
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// //string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// //view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
// string fileUrl = XtWorkFlowService.GetXtAttachPaht(item.FilePath);
// view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
//}
//if (view.Temp_TzAttachs != null)
//{
// view.Temp_TzAttachs = view.Temp_TzAttachs.Substring(0, view.Temp_TzAttachs.Length - 1);
//}
view.Temp_TzAttachs = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
reveiews.WorkFlowId = XtWorkFlowService.CreateConDrawingWorkFlow(view);
}
#endregion
if (isAdd)
{
rows = DataOperateBusiness <Epm_TzConDrawing> .Get().Add(reveiews);
}
else
{
rows = DataOperateBusiness <Epm_TzConDrawing> .Get().Update(reveiews);
}
if (baseEntity.Count != 0 && model.State == (int)PreProjectApprovalState.ApprovalSuccess) //如果附件选择了图纸类型&&状态是通过了审核，往图纸管理同步一条数据
{
baseEntity = baseEntity.Where(p => p.ImageType == "SGTZSHTZ").ToList(); //筛选附件是图纸类型（SGTZSHTZ）
drawingToDraw(reveiews, baseEntity); //整理图纸管理数据
}
result.Data = rows;
result.Flag = EResultFlag.Success;
// WriteLog(AdminModule.TzConDrawing.GetText(), SystemRight.Add.GetText(), "新增: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "AddTzConDrawing");
}
return(result);
}
///<summary>
///修改:
///</summary>
/// <param name="model">要修改的model</param>
/// <returns>受影响的行数</returns>
public Result <int> UpdateTzConDrawing(Epm_TzConDrawing model, List <Base_Files> baseEntity)
{
Result <int> result = new Result <int>();
try
{
var drawing = DataOperateBusiness <Epm_TzConDrawing> .Get().Single(p => p.Id == model.Id);
model.ProjectId = drawing.ProjectId; //项目ID
model.ProjectCode = drawing.ProjectCode; //项目编码
model.ProjectName = drawing.ProjectName; //项目名称
model.ApprovalNo = drawing.ApprovalNo; //项目批复号
model.Nature = drawing.Nature; //项目性质
model.NatureName = drawing.NatureName; //项目性质名称
model.ApplyTime = drawing.ApplyTime; //项目提出时间
model.StationId = drawing.StationId; //站库id
model.StationCodeXt = drawing.StationCodeXt; //站库协同编码
model.StationName = drawing.StationName; //站库名称
model.CompanyId = drawing.CompanyId; //地市公司ID
model.CompanyCodeXt = drawing.CompanyCodeXt; //地市公司编码
model.CompanyName = drawing.CompanyName; //地市公司名称
SetCurrentUser(model);
//上传图纸
AddFilesBytzTable(model, model.TzAttachs);
#region 施工图纸会审流程申请 暂时注释 勿删！！！
var XtWorkFlow = System.Configuration.ConfigurationManager.AppSettings.Get("XtWorkFlow");
if (model.State == (int)PreProjectState.WaitApproval && XtWorkFlow == "1")
{
TzConDrawingWorkFlowView view = new TzConDrawingWorkFlowView();
var baseUser = DataOperateBasic <Base_User> .Get().GetModel(model.CreateUserId);
if (baseUser == null)
{
throw new Exception("未找到申请人相关信息！");
}
else
{
view.hr_sqr = baseUser.ObjeId;
}
view.CompanyName = model.CompanyName;
view.Conclusion = model.CompanyName;
view.Moderator = model.Moderator;
view.NatureName = model.NatureName;
view.Participants = model.Participants;
view.PredictMoney = "";
view.ProjectCode = model.ProjectCode;
view.ProjectName = model.ProjectName;
view.ProvinceName = model.CompanyName;
view.ReviewAddress = model.ReviewAddress;
view.ReviewExperts = model.ReviewExperts;
view.ReviewTime = model.ReviewTime.ToString();
view.StationName = model.StationName;
view.StationTypeName = model.Nature;
//上传附件
if (model.TzAttachs != null && model.TzAttachs.Any())
{
//string baseFaleUrl = System.Configuration.ConfigurationManager.AppSettings.Get("XtDownloadUrl");
//foreach (var item in model.TzAttachs)
//{
// //string fileUrl = string.Format("{0}?fileId={1}&type={2}", baseFaleUrl, item.Id, item.TypeNo);
// //view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
// string fileUrl = XtWorkFlowService.GetXtAttachPaht(item.FilePath);
// view.Temp_TzAttachs = fileUrl + '|' + view.Temp_TzAttachs;
//}
//if (view.Temp_TzAttachs != null)
//{
// view.Temp_TzAttachs = view.Temp_TzAttachs.Substring(0, view.Temp_TzAttachs.Length - 1);
//}
view.Temp_TzAttachs = XtWorkFlowSubmitService.CreateXtAttachPath(model.TzAttachs);
}
model.WorkFlowId = XtWorkFlowService.CreateConDrawingWorkFlow(view);
}
#endregion
var rows = DataOperateBusiness <Epm_TzConDrawing> .Get().Update(model);
//AddFilesBytzTable(reveiews, model.TzAttachs);
//if (model.TzAttachs != null)
//{
// //删除之前的附件
// DeleteFilesByTable(model.GetType().Name, new List<long>() { model.Id });
// //新增附件
// AddFilesBytzTable(model, model.TzAttachs);
//}
//else
//{
// //删除之前的附件
// DeleteFilesByTable(model.GetType().Name, new List<long>() { model.Id });
//}
if (baseEntity.Count != 0 && model.State == (int)PreProjectApprovalState.ApprovalSuccess)//如果附件选择了图纸类型&&状态是通过了审核，往图纸管理同步一条数据
{
baseEntity = baseEntity.Where(p => p.ImageType == "SGTZSHTZ").ToList();
drawingToDraw(model, baseEntity);
}
result.Data = rows;
result.Flag = EResultFlag.Success;
// WriteLog(AdminModule.TzConDrawing.GetText(), SystemRight.Modify.GetText(), "修改: " + model.Id);
}
catch (Exception ex)
{
result.Data = -1;
result.Flag = EResultFlag.Failure;
result.Exception = new ExceptionEx(ex, "UpdateTzConDrawing");
}
return(result);
}
