protected virtual void precompute_shells()
{
int nLayers = Slices.Count;
LayerShells = new List <ShellsFillPolygon> [nLayers];
gParallel.ForEach(Interval1i.Range(nLayers), (layeri) => {
PlanarSlice slice = Slices[layeri];
LayerShells[layeri] = new List <ShellsFillPolygon>();
List <GeneralPolygon2d> solids = slice.Solids;
foreach (GeneralPolygon2d shape in solids)
{
ShellsFillPolygon shells_gen = new ShellsFillPolygon(shape);
shells_gen.PathSpacing = Settings.SolidFillPathSpacingMM();
shells_gen.ToolWidth = Settings.Machine.NozzleDiamMM;
shells_gen.Layers = Settings.Shells;
shells_gen.InsetInnerPolygons = false;
shells_gen.Compute();
LayerShells[layeri].Add(shells_gen);
if (slice.Tags.Has(shape))
{
ShellTags.Add(shells_gen, slice.Tags.Get(shape));
}
}
});
}
protected override void add_cavity_polygons(PlanarSlice slice, List <GeneralPolygon2d> polygons, PrintMeshOptions options)
{
slice.AddCavityPolygons(polygons);
if (options.Extended != null && options.Extended is ExtendedPrintMeshOptions)
{
ExtendedPrintMeshOptions ext = options.Extended as ExtendedPrintMeshOptions;
if (slice is PlanarSlicePro)
{
PlanarSlicePro sp = slice as PlanarSlicePro;
if (ext.ClearanceXY != 0)
{
foreach (var poly in polygons)
{
sp.Cavity_Clearances.Add(poly, ext.ClearanceXY);
}
}
if (ext.OffsetXY != 0)
{
foreach (var poly in polygons)
{
sp.Cavity_Offsets.Add(poly, ext.OffsetXY);
}
}
}
}
}
/// <summary>
/// Add explicit support points for any small floating polygons.
/// These can be used at toolpathing time to ensure support for
/// such areas, which otherwise might be lost (or insufficiently
/// supported) by the standard techniques to detect support regions.
/// </summary>
public void AddMinZTipSupportPoints(double tipDiamThresh = 2.0, int nExtraLayers = 0)
{
List <Vector3d> tips = new List <Vector3d>();
SpinLock tiplock = new SpinLock();
int N = Slices.Count;
gParallel.ForEach(Interval1i.FromToInclusive(1, N - 1), (li) =>
{
PlanarSlice slice = Slices[li];
PlanarSlice prev = Slices[li - 1];
foreach (GeneralPolygon2d poly in slice.InputSolids)
{
AxisAlignedBox2d bounds = poly.Bounds;
if (bounds.MaxDim > tipDiamThresh)
{
continue;
}
Vector2d c = bounds.Center;
bool contained = false;
foreach (var poly2 in prev.InputSolids)
{
if (poly2.Contains(c))
{
contained = true;
break;
}
}
if (contained)
{
continue;
}
bool entered = false;
tiplock.Enter(ref entered);
tips.Add(new Vector3d(c.x, c.y, li));
tiplock.Exit();
}
});
foreach (var tip in tips)
{
int layer_i = (int)tip.z;
int add_to = Math.Min(N - 1, layer_i + nExtraLayers);
for (int i = layer_i; i < add_to; ++i)
{
Slices[i].InputSupportPoints.Add(tip.xy);
}
}
}
/// <summary>
/// Format is:
/// [num_slices]
/// [slice0_z]
/// [num_polys_in_slice_0]
/// [x0 y0 x1 y1 x2 y3 ...]
/// [x0 y0 x1 y1 ... ]
/// [slice1_z]
/// [num_polys_in_slice_1]
/// ...
/// </summary>
public void ReadSimpleSliceFormat(TextReader reader)
{
PlanarComplex.FindSolidsOptions options = PlanarComplex.FindSolidsOptions.SortPolygons;
options.TrustOrientations = false;
char[] splitchars = new char[] { ' ' };
int nSlices = int.Parse(reader.ReadLine());
PlanarComplex[] layer_complexes = new PlanarComplex[nSlices];
for (int si = 0; si < nSlices; ++si)
{
PlanarSlice slice = new PlanarSlice();
slice.Z = double.Parse(reader.ReadLine());
PlanarComplex complex = new PlanarComplex();
int nPolys = int.Parse(reader.ReadLine());
for (int pi = 0; pi < nPolys; pi++)
{
string[] stringValues = reader.ReadLine().Split(splitchars, StringSplitOptions.RemoveEmptyEntries);
double[] values = Array.ConvertAll(stringValues, Double.Parse);
Polygon2d poly = new Polygon2d(values);
if (poly.VertexCount < 3)
{
continue;
}
complex.Add(poly);
}
layer_complexes[si] = complex;
//// this could be done in separate thread...
//var solidInfo = complex.FindSolidRegions(options);
//slice.InputSolids = solidInfo.Polygons;
//slice.Resolve();
Slices.Add(slice);
}
gParallel.ForEach(Interval1i.Range(nSlices), (si) =>
{
var solidInfo = layer_complexes[si].FindSolidRegions(options);
Slices[si].InputSolids = solidInfo.Polygons;
Slices[si].Resolve();
});
}
protected virtual void add_solid_polygons(PlanarSlice slice, List <GeneralPolygon2d> polygons, PrintMeshOptions options)
{
slice.AddPolygons(polygons);
if (options.ClearanceXY != 0)
{
foreach (var poly in polygons)
{
slice.Clearances.Add(poly, options.ClearanceXY);
}
}
if (options.OffsetXY != 0)
{
foreach (var poly in polygons)
{
slice.Offsets.Add(poly, options.OffsetXY);
}
}
}
public DMesh3 Make3DTubes(Interval1i layer_range, double merge_tol, double tube_radius)
{
Polygon2d tube_profile = Polygon2d.MakeCircle(tube_radius, 8);
Frame3f frame = Frame3f.Identity;
DMesh3 full_mesh = new DMesh3();
foreach (int layer_i in layer_range)
{
PlanarSlice slice = Slices[layer_i];
frame.Origin = new Vector3f(0, 0, slice.Z);
foreach (GeneralPolygon2d gpoly in slice.Solids)
{
List <Polygon2d> polys = new List <Polygon2d>()
{
gpoly.Outer
}; polys.AddRange(gpoly.Holes);
foreach (Polygon2d poly in polys)
{
Polygon2d simpPoly = new Polygon2d(poly);
simpPoly.Simplify(merge_tol, 0.01, true);
if (simpPoly.VertexCount < 3)
{
Util.gBreakToDebugger();
}
TubeGenerator tubegen = new TubeGenerator(simpPoly, frame, tube_profile)
{
NoSharedVertices = true
};
DMesh3 tubeMesh = tubegen.Generate().MakeDMesh();
MeshEditor.Append(full_mesh, tubeMesh);
}
}
}
return(full_mesh);
}
protected virtual void add_crop_region_polygons(PlanarSlice slice, List <GeneralPolygon2d> polygons, PrintMeshOptions options)
{
slice.AddCropRegions(polygons);
}
protected virtual void add_support_polygons(PlanarSlice slice, List <GeneralPolygon2d> polygons, PrintMeshOptions options)
{
slice.AddSupportPolygons(polygons);
}
/// <summary>
/// Slice the meshes and return the slice stack.
/// </summary>
public PlanarSliceStack Compute()
{
if (Meshes.Count == 0)
{
return(new PlanarSliceStack());
}
Interval1d zrange = Interval1d.Empty;
foreach (var meshinfo in Meshes)
{
zrange.Contain(meshinfo.bounds.Min.z);
zrange.Contain(meshinfo.bounds.Max.z);
}
if (SetMinZValue != double.MinValue)
{
zrange.a = SetMinZValue;
}
// construct layers
List <PlanarSlice> slice_list = new List <PlanarSlice>();
double cur_layer_z = zrange.a;
int layer_i = 0;
while (cur_layer_z < zrange.b)
{
double layer_height = get_layer_height(layer_i);
double z = cur_layer_z;
Interval1d zspan = new Interval1d(z, z + layer_height);
if (SliceLocation == SliceLocations.EpsilonBase)
{
z += 0.01 * layer_height;
}
else if (SliceLocation == SliceLocations.MidLine)
{
z += 0.5 * layer_height;
}
PlanarSlice slice = SliceFactoryF(zspan, z, layer_i);
slice.EmbeddedPathWidth = OpenPathDefaultWidthMM;
slice_list.Add(slice);
layer_i++;
cur_layer_z += layer_height;
}
int NH = slice_list.Count;
if (NH > MaxLayerCount)
{
throw new Exception("MeshPlanarSlicer.Compute: exceeded layer limit. Increase .MaxLayerCount.");
}
PlanarSlice[] slices = slice_list.ToArray();
// determine if we have crop objects
bool have_crop_objects = false;
foreach (var mesh in Meshes)
{
if (mesh.options.IsCropRegion)
{
have_crop_objects = true;
}
}
// assume Resolve() takes 2x as long as meshes...
TotalCompute = (Meshes.Count * NH) + (2 * NH);
Progress = 0;
// compute slices separately for each mesh
for (int mi = 0; mi < Meshes.Count; ++mi)
{
if (Cancelled())
{
break;
}
DMesh3 mesh = Meshes[mi].mesh;
PrintMeshOptions mesh_options = Meshes[mi].options;
// [TODO] should we hang on to this spatial? or should it be part of assembly?
DMeshAABBTree3 spatial = new DMeshAABBTree3(mesh, true);
AxisAlignedBox3d bounds = Meshes[mi].bounds;
bool is_cavity = mesh_options.IsCavity;
bool is_crop = mesh_options.IsCropRegion;
bool is_support = mesh_options.IsSupport;
bool is_closed = (mesh_options.IsOpen) ? false : mesh.IsClosed();
var useOpenMode = (mesh_options.OpenPathMode == OpenPathsModes.Default) ?
DefaultOpenPathMode : mesh_options.OpenPathMode;
// each layer is independent so we can do in parallel
gParallel.ForEach(Interval1i.Range(NH), (i) =>
{
if (Cancelled())
{
return;
}
double z = slices[i].Z;
if (z < bounds.Min.z || z > bounds.Max.z)
{
return;
}
// compute cut
Polygon2d[] polys; PolyLine2d[] paths;
compute_plane_curves(mesh, spatial, z, is_closed, out polys, out paths);
// if we didn't hit anything, try again with jittered plane
// [TODO] this could be better...
if ((is_closed && polys.Length == 0) || (is_closed == false && polys.Length == 0 && paths.Length == 0))
{
double jitterz = slices[i].LayerZSpan.Interpolate(0.75);
compute_plane_curves(mesh, spatial, jitterz, is_closed, out polys, out paths);
}
if (is_closed)
{
// construct planar complex and "solids"
// (ie outer polys and nested holes)
PlanarComplex complex = new PlanarComplex();
foreach (Polygon2d poly in polys)
{
complex.Add(poly);
}
PlanarComplex.FindSolidsOptions options
= PlanarComplex.FindSolidsOptions.Default;
options.WantCurveSolids = false;
options.SimplifyDeviationTolerance = 0.001;
options.TrustOrientations = true;
options.AllowOverlappingHoles = true;
PlanarComplex.SolidRegionInfo solids = complex.FindSolidRegions(options);
List <GeneralPolygon2d> solid_polygons = ApplyValidRegions(solids.Polygons);
if (is_support)
{
add_support_polygons(slices[i], solid_polygons, mesh_options);
}
else if (is_cavity)
{
add_cavity_polygons(slices[i], solid_polygons, mesh_options);
}
else if (is_crop)
{
add_crop_region_polygons(slices[i], solid_polygons, mesh_options);
}
else
{
add_solid_polygons(slices[i], solid_polygons, mesh_options);
}
}
else if (useOpenMode != OpenPathsModes.Ignored)
{
// [TODO]
// - does not really handle clipped polygons properly, there will be an extra break somewhere...
List <PolyLine2d> all_paths = new List <PolyLine2d>(paths);
foreach (Polygon2d poly in polys)
{
all_paths.Add(new PolyLine2d(poly, true));
}
List <PolyLine2d> open_polylines = ApplyValidRegions(all_paths);
foreach (PolyLine2d pline in open_polylines)
{
if (useOpenMode == OpenPathsModes.Embedded)
{
slices[i].AddEmbeddedPath(pline);
}
else
{
slices[i].AddClippedPath(pline);
}
}
}
Interlocked.Increment(ref Progress);
}); // end of parallel.foreach
} // end mesh iter
// resolve planar intersections, etc
gParallel.ForEach(Interval1i.Range(NH), (i) =>
{
if (Cancelled())
{
return;
}
if (have_crop_objects && slices[i].InputCropRegions.Count == 0)
{
// don't resolve, we have fully cropped this layer
}
else
{
slices[i].Resolve();
}
Interlocked.Add(ref Progress, 2);
});
// discard spurious empty slices
int last = slices.Length - 1;
while (slices[last].IsEmpty && last > 0)
{
last--;
}
int first = 0;
if (DiscardEmptyBaseSlices || have_crop_objects)
{
while (slices[first].IsEmpty && first < slices.Length)
{
first++;
}
}
PlanarSliceStack stack = SliceStackFactoryF();
for (int k = first; k <= last; ++k)
{
stack.Add(slices[k]);
}
if (SupportMinZTips)
{
stack.AddMinZTipSupportPoints(MinZTipMaxDiam, MinZTipExtraLayers);
}
return(stack);
}
protected virtual void add_cavity_polygons(PlanarSlice slice, List <GeneralPolygon2d> polygons, PrintMeshOptions options)
{
slice.AddCavityPolygons(polygons);
}
/// <summary>
/// Slice the meshes and return the slice stack.
/// </summary>
public PlanarSliceStack Compute()
{
if (Meshes.Count == 0)
{
return(new PlanarSliceStack());
}
Interval1d zrange = Interval1d.Empty;
foreach (var meshinfo in Meshes)
{
zrange.Contain(meshinfo.bounds.Min.z);
zrange.Contain(meshinfo.bounds.Max.z);
}
if (SetMinZValue != double.MinValue)
{
zrange.a = SetMinZValue;
}
int nLayers = (int)(zrange.Length / LayerHeightMM);
if (nLayers > MaxLayerCount)
{
throw new Exception("MeshPlanarSlicer.Compute: exceeded layer limit. Increase .MaxLayerCount.");
}
// make list of slice heights (could be irregular)
List <double> heights = new List <double>();
for (int i = 0; i < nLayers + 1; ++i)
{
double t = zrange.a + (double)i * LayerHeightMM;
if (SliceLocation == SliceLocations.EpsilonBase)
{
t += 0.01 * LayerHeightMM;
}
else if (SliceLocation == SliceLocations.MidLine)
{
t += 0.5 * LayerHeightMM;
}
heights.Add(t);
}
int NH = heights.Count;
// process each *slice* in parallel
PlanarSlice[] slices = new PlanarSlice[NH];
for (int i = 0; i < NH; ++i)
{
slices[i] = SliceFactoryF(heights[i], i);
slices[i].EmbeddedPathWidth = OpenPathDefaultWidthMM;
}
// assume Resolve() takes 2x as long as meshes...
TotalCompute = (Meshes.Count * NH) + (2 * NH);
Progress = 0;
// compute slices separately for each mesh
for (int mi = 0; mi < Meshes.Count; ++mi)
{
if (Cancelled())
{
break;
}
DMesh3 mesh = Meshes[mi].mesh;
PrintMeshOptions mesh_options = Meshes[mi].options;
// [TODO] should we hang on to this spatial? or should it be part of assembly?
DMeshAABBTree3 spatial = new DMeshAABBTree3(mesh, true);
AxisAlignedBox3d bounds = Meshes[mi].bounds;
bool is_cavity = mesh_options.IsCavity;
bool is_crop = mesh_options.IsCropRegion;
bool is_support = mesh_options.IsSupport;
bool is_closed = (mesh_options.IsOpen) ? false : mesh.IsClosed();
var useOpenMode = (mesh_options.OpenPathMode == PrintMeshOptions.OpenPathsModes.Default) ?
DefaultOpenPathMode : mesh_options.OpenPathMode;
// each layer is independent so we can do in parallel
gParallel.ForEach(Interval1i.Range(NH), (i) => {
if (Cancelled())
{
return;
}
double z = heights[i];
if (z < bounds.Min.z || z > bounds.Max.z)
{
return;
}
// compute cut
Polygon2d[] polys; PolyLine2d[] paths;
compute_plane_curves(mesh, spatial, z, is_closed, out polys, out paths);
// if we didn't hit anything, try again with jittered plane
// [TODO] this could be better...
if ((is_closed && polys.Length == 0) || (is_closed == false && polys.Length == 0 && paths.Length == 0))
{
compute_plane_curves(mesh, spatial, z + LayerHeightMM * 0.25, is_closed, out polys, out paths);
}
if (is_closed)
{
// construct planar complex and "solids"
// (ie outer polys and nested holes)
PlanarComplex complex = new PlanarComplex();
foreach (Polygon2d poly in polys)
{
complex.Add(poly);
}
PlanarComplex.FindSolidsOptions options
= PlanarComplex.FindSolidsOptions.Default;
options.WantCurveSolids = false;
options.SimplifyDeviationTolerance = 0.001;
options.TrustOrientations = true;
options.AllowOverlappingHoles = true;
PlanarComplex.SolidRegionInfo solids =
complex.FindSolidRegions(options);
if (is_support)
{
add_support_polygons(slices[i], solids.Polygons, mesh_options);
}
else if (is_cavity)
{
add_cavity_polygons(slices[i], solids.Polygons, mesh_options);
}
else if (is_crop)
{
add_crop_region_polygons(slices[i], solids.Polygons, mesh_options);
}
else
{
add_solid_polygons(slices[i], solids.Polygons, mesh_options);
}
}
else if (useOpenMode != PrintMeshOptions.OpenPathsModes.Ignored)
{
foreach (PolyLine2d pline in paths)
{
if (useOpenMode == PrintMeshOptions.OpenPathsModes.Embedded)
{
slices[i].AddEmbeddedPath(pline);
}
else
{
slices[i].AddClippedPath(pline);
}
}
// [TODO]
// - does not really handle clipped polygons properly, there will be an extra break somewhere...
foreach (Polygon2d poly in polys)
{
PolyLine2d pline = new PolyLine2d(poly, true);
if (useOpenMode == PrintMeshOptions.OpenPathsModes.Embedded)
{
slices[i].AddEmbeddedPath(pline);
}
else
{
slices[i].AddClippedPath(pline);
}
}
}
Interlocked.Increment(ref Progress);
}); // end of parallel.foreach
} // end mesh iter
// resolve planar intersections, etc
gParallel.ForEach(Interval1i.Range(NH), (i) => {
if (Cancelled())
{
return;
}
slices[i].Resolve();
Interlocked.Add(ref Progress, 2);
});
// discard spurious empty slices
int last = slices.Length - 1;
while (slices[last].IsEmpty && last > 0)
{
last--;
}
int first = 0;
if (DiscardEmptyBaseSlices)
{
while (slices[first].IsEmpty && first < slices.Length)
{
first++;
}
}
PlanarSliceStack stack = SliceStackFactoryF();
for (int k = first; k <= last; ++k)
{
stack.Add(slices[k]);
}
if (SupportMinZTips)
{
stack.AddMinZTipSupportPoints(MinZTipMaxDiam, MinZTipExtraLayers);
}
return(stack);
}
protected PlanarSlice ComputeSolidSliceAtZ(double z, bool bCavitySolids)
{
PlanarSlice temp = new PlanarSlice();
for (int mi = 0; mi < Meshes.Count; ++mi)
{
if (Cancelled())
{
break;
}
DMesh3 mesh = Meshes[mi].mesh;
PrintMeshOptions mesh_options = Meshes[mi].options;
// [TODO] should we hang on to this spatial? or should it be part of assembly?
DMeshAABBTree3 spatial = new DMeshAABBTree3(mesh, true);
AxisAlignedBox3d bounds = Meshes[mi].bounds;
bool is_cavity = mesh_options.IsCavity;
bool is_crop = mesh_options.IsCropRegion;
bool is_support = mesh_options.IsSupport;
bool is_closed = (mesh_options.IsOpen) ? false : mesh.IsClosed();
var useOpenMode = (mesh_options.OpenPathMode == PrintMeshOptions.OpenPathsModes.Default) ?
DefaultOpenPathMode : mesh_options.OpenPathMode;
if (is_crop || is_support)
{
throw new Exception("Not supported!");
}
if (bCavitySolids && is_cavity == false)
{
continue;
}
// compute cut
Polygon2d[] polys; PolyLine2d[] paths;
ComputeSlicePlaneCurves(mesh, spatial, z, is_closed, out polys, out paths);
if (is_closed)
{
// construct planar complex and "solids"
// (ie outer polys and nested holes)
PlanarComplex complex = new PlanarComplex();
foreach (Polygon2d poly in polys)
{
complex.Add(poly);
}
PlanarComplex.FindSolidsOptions options
= PlanarComplex.FindSolidsOptions.Default;
options.WantCurveSolids = false;
options.SimplifyDeviationTolerance = 0.001;
options.TrustOrientations = true;
options.AllowOverlappingHoles = true;
PlanarComplex.SolidRegionInfo solids = complex.FindSolidRegions(options);
List <GeneralPolygon2d> solid_polygons = ApplyValidRegions(solids.Polygons);
if (is_cavity && bCavitySolids == false)
{
add_cavity_polygons(temp, solid_polygons, mesh_options);
}
else
{
add_solid_polygons(temp, solid_polygons, mesh_options);
}
}
}
return(temp);
}
/// <summary>
/// Slice the meshes and return the slice stack.
/// </summary>
public Result Compute()
{
Result result = new Result();
if (Meshes.Count == 0)
{
return(result);
}
// find Z interval we want to slice in
Interval1d zrange = Interval1d.Empty;
foreach (var meshinfo in Meshes)
{
zrange.Contain(meshinfo.bounds.Min.z);
zrange.Contain(meshinfo.bounds.Max.z);
}
if (SetMinZValue != double.MinValue)
{
zrange.a = SetMinZValue;
}
result.TopZ = Math.Round(zrange.b, PrecisionDigits);
result.BaseZ = Math.Round(zrange.a, PrecisionDigits);
// [TODO] might be able to make better decisions if we took flat regions
// into account when constructing initial Z-heights? if we have large flat
// region just below Zstep, might make sense to do two smaller Z-steps so we
// can exactly hit it??
// construct list of clearing Z-heights
List <double> clearingZLayers = new List <double>();
double cur_layer_z = zrange.b;
int layer_i = 0;
while (cur_layer_z > zrange.a)
{
double layer_height = get_layer_height(layer_i);
cur_layer_z -= layer_height;
double z = Math.Round(cur_layer_z, PrecisionDigits);
clearingZLayers.Add(z);
layer_i++;
}
if (clearingZLayers.Last() < result.BaseZ)
{
clearingZLayers[clearingZLayers.Count - 1] = result.BaseZ;
}
if (clearingZLayers.Last() == clearingZLayers[clearingZLayers.Count - 2])
{
clearingZLayers.RemoveAt(clearingZLayers.Count - 1);
}
// construct layer slices from Z-heights
List <PlanarSlice> clearing_slice_list = new List <PlanarSlice>();
layer_i = 0;
for (int i = 0; i < clearingZLayers.Count; ++i)
{
double layer_height = (i == clearingZLayers.Count - 1) ?
(result.TopZ - clearingZLayers[i]) : (clearingZLayers[i + 1] - clearingZLayers[i]);
double z = clearingZLayers[i];
Interval1d zspan = new Interval1d(z, z + layer_height);
if (SliceLocation == SliceLocations.EpsilonBase)
{
z += 0.001;
}
PlanarSlice slice = SliceFactoryF(zspan, z, layer_i);
clearing_slice_list.Add(slice);
layer_i++;
}
int NH = clearing_slice_list.Count;
if (NH > MaxLayerCount)
{
throw new Exception("MeshPlanarSlicer.Compute: exceeded layer limit. Increase .MaxLayerCount.");
}
PlanarSlice[] clearing_slices = clearing_slice_list.ToArray();
// assume Resolve() takes 2x as long as meshes...
TotalCompute = (Meshes.Count * NH) + (2 * NH);
Progress = 0;
// compute slices separately for each mesh
for (int mi = 0; mi < Meshes.Count; ++mi)
{
if (Cancelled())
{
break;
}
DMesh3 mesh = Meshes[mi].mesh;
PrintMeshOptions mesh_options = Meshes[mi].options;
// [TODO] should we hang on to this spatial? or should it be part of assembly?
DMeshAABBTree3 spatial = new DMeshAABBTree3(mesh, true);
AxisAlignedBox3d bounds = Meshes[mi].bounds;
bool is_cavity = mesh_options.IsCavity;
bool is_crop = mesh_options.IsCropRegion;
bool is_support = mesh_options.IsSupport;
bool is_closed = (mesh_options.IsOpen) ? false : mesh.IsClosed();
var useOpenMode = (mesh_options.OpenPathMode == PrintMeshOptions.OpenPathsModes.Default) ?
DefaultOpenPathMode : mesh_options.OpenPathMode;
if (is_crop || is_support)
{
throw new Exception("Not supported!");
}
// each layer is independent so we can do in parallel
gParallel.ForEach(Interval1i.Range(NH), (i) => {
if (Cancelled())
{
return;
}
double z = clearing_slices[i].Z;
if (z < bounds.Min.z || z > bounds.Max.z)
{
return;
}
// compute cut
Polygon2d[] polys; PolyLine2d[] paths;
ComputeSlicePlaneCurves(mesh, spatial, z, is_closed, out polys, out paths);
if (is_closed)
{
// construct planar complex and "solids"
// (ie outer polys and nested holes)
PlanarComplex complex = new PlanarComplex();
foreach (Polygon2d poly in polys)
{
complex.Add(poly);
}
PlanarComplex.FindSolidsOptions options
= PlanarComplex.FindSolidsOptions.Default;
options.WantCurveSolids = false;
options.SimplifyDeviationTolerance = 0.001;
options.TrustOrientations = true;
options.AllowOverlappingHoles = true;
PlanarComplex.SolidRegionInfo solids = complex.FindSolidRegions(options);
List <GeneralPolygon2d> solid_polygons = ApplyValidRegions(solids.Polygons);
if (is_cavity)
{
add_cavity_polygons(clearing_slices[i], solid_polygons, mesh_options);
}
else
{
if (ExpandStockAmount > 0)
{
solid_polygons = ClipperUtil.MiterOffset(solid_polygons, ExpandStockAmount);
}
add_solid_polygons(clearing_slices[i], solid_polygons, mesh_options);
}
}
Interlocked.Increment(ref Progress);
}); // end of parallel.foreach
} // end mesh iter
// resolve planar intersections, etc
gParallel.ForEach(Interval1i.Range(NH), (i) => {
if (Cancelled())
{
return;
}
clearing_slices[i].Resolve();
Interlocked.Add(ref Progress, 2);
});
// add to clearing stack
result.Clearing = SliceStackFactoryF();
for (int k = 0; k < clearing_slices.Length; ++k)
{
result.Clearing.Add(clearing_slices[k]);
}
/*
* Horizontal planar regions finishing pass.
* First we find all planar horizontal Z-regions big enough to mill.
* Then we add slices at the Z's we haven't touched yet.
*
* Cannot just 'fill' planar regions because we will miss edges that might
* be millable. So we grow region and then intersect with full-slice millable area.
*/
// find set of horizontal flat regions
Dictionary <double, List <PlanarRegion> > flat_regions = FindPlanarZRegions(ToolDiameter);
if (flat_regions.Count == 0)
{
goto done_slicing;
}
// if we have already milled this exact Z-height in clearing pass, then we can skip it
List <double> doneZ = new List <double>();
foreach (double z in flat_regions.Keys)
{
if (clearingZLayers.Contains(z))
{
doneZ.Add(z);
}
}
foreach (var z in doneZ)
{
flat_regions.Remove(z);
}
// create slice for each layer
PlanarSlice[] horz_slices = new PlanarSlice[flat_regions.Count];
List <double> flatZ = new List <double>(flat_regions.Keys);
flatZ.Sort();
for (int k = 0; k < horz_slices.Length; ++k)
{
double z = flatZ[k];
Interval1d zspan = new Interval1d(z, z + LayerHeightMM);
horz_slices[k] = SliceFactoryF(zspan, z, k);
// compute full millable region slightly above this slice.
PlanarSlice clip_slice = ComputeSolidSliceAtZ(z + 0.0001, false);
clip_slice.Resolve();
// extract planar polys
List <Polygon2d> polys = GetPlanarPolys(flat_regions[z]);
PlanarComplex complex = new PlanarComplex();
foreach (Polygon2d poly in polys)
{
complex.Add(poly);
}
// convert to planar solids
PlanarComplex.FindSolidsOptions options
= PlanarComplex.FindSolidsOptions.SortPolygons;
options.SimplifyDeviationTolerance = 0.001;
options.TrustOrientations = true;
options.AllowOverlappingHoles = true;
PlanarComplex.SolidRegionInfo solids = complex.FindSolidRegions(options);
List <GeneralPolygon2d> solid_polygons = ApplyValidRegions(solids.Polygons);
// If planar solid has holes, then when we do inset later, we might lose
// too-thin parts. Shrink the holes to avoid this case.
//FilterHoles(solid_polygons, 0.55 * ToolDiameter);
// ok now we need to expand region and intersect with full region.
solid_polygons = ClipperUtil.MiterOffset(solid_polygons, ToolDiameter * 0.5, 0.0001);
solid_polygons = ClipperUtil.Intersection(solid_polygons, clip_slice.Solids, 0.0001);
// Same idea as above, but if we do after, we keep more of the hole and
// hence do less extra clearing.
// Also this could then be done at the slicer level instead of here...
// (possibly this entire thing should be done at slicer level, except we need clip_slice!)
FilterHoles(solid_polygons, 1.1 * ToolDiameter);
add_solid_polygons(horz_slices[k], solid_polygons, PrintMeshOptions.Default());
}
// resolve planar intersections, etc
int NF = horz_slices.Length;
gParallel.ForEach(Interval1i.Range(NF), (i) => {
if (Cancelled())
{
return;
}
horz_slices[i].Resolve();
Interlocked.Add(ref Progress, 2);
});
// add to clearing stack
result.HorizontalFinish = SliceStackFactoryF();
for (int k = 0; k < horz_slices.Length; ++k)
{
result.HorizontalFinish.Add(horz_slices[k]);
}
done_slicing:
return(result);
}
public void Add(PlanarSlice slice)
{
Slices.Add(slice);
}