public void StartTest(XmlReader xmldoc, string testToRun, ref gbXMLReport gbr, string username = "******")
{
log4net.Config.XmlConfigurator.Configure();
TestToRun = testToRun;
globalMatchObject = new gbXMLMatches();
globalMatchObject.Init();
//first create a list of lists that is indexed identically to the drop down list the user selects
TestDetail = new DOEgbXMLTestDetail();
//then populate the list of lists. All indexing is done "by hand" in InitializeTestResultStrings()
TestDetail.InitializeTestResultStrings();
//create report list reportlist will store all the test result
ReportList = new List<DOEgbXMLReportingObj>();
//Load an XML File for the test at hand
gbXMLTestFile = new XmlDocument();
gbXMLTestFile.Load(xmldoc);
gbXMLStandardFile = new XmlDocument();
gbXMLStandardFile.Load(filepaths[TestToRun]);
if (!TestFileIsAvailable())
{
//TODO: update browser json with something to indicate there is a problem
return;
}
//Define the namespace
XmlNamespaceManager gbXMLns1 = new XmlNamespaceManager(gbXMLTestFile.NameTable);
gbXMLns1.AddNamespace("gbXMLv5", "http://www.gbxml.org/schema");
XmlNamespaceManager gbXMLns2 = new XmlNamespaceManager(gbXMLStandardFile.NameTable);
gbXMLns2.AddNamespace("gbXMLv5", "http://www.gbxml.org/schema");
List<XmlDocument> gbXMLdocs = new List<XmlDocument>();
gbXMLdocs.Add(gbXMLTestFile);
gbXMLdocs.Add(gbXMLStandardFile);
List<XmlNamespaceManager> gbXMLnsm = new List<XmlNamespaceManager>();
gbXMLnsm.Add(gbXMLns1);
gbXMLnsm.Add(gbXMLns2);
//standardizing all tests on US-IP
Conversions c = new Conversions();
Conversions.volumeUnitEnum testVol = Conversions.volumeUnitEnum.CubicFeet;
Conversions.volumeUnitEnum validatorVol = Conversions.volumeUnitEnum.CubicFeet;
Conversions.areaUnitEnum testArea = Conversions.areaUnitEnum.SquareFeet;
Conversions.areaUnitEnum validatorArea = Conversions.areaUnitEnum.SquareFeet;
Conversions.lengthUnitEnum testLength = Conversions.lengthUnitEnum.Feet;
Conversions.lengthUnitEnum validatorLength = Conversions.lengthUnitEnum.Feet;
Conversions.lengthUnitEnum standardLength = Conversions.lengthUnitEnum.Feet;
Conversions.areaUnitEnum standardArea = Conversions.areaUnitEnum.SquareFeet;
Conversions.volumeUnitEnum standardVol = Conversions.volumeUnitEnum.CubicFeet;
//standardize all units to feet, square feet, and cubic feet
double testlengthConversion = 1;
double testareaConversion = 1;
double testvolumeConversion = 1;
double standardlengthConversion = 1;
double standardareaConversion = 1;
double standardvolConversion = 1;
bool mustBePlanar = false;
for(int ns=0; ns< gbXMLnsm.Count; ns++)
{
if (ns == 0)
{
XmlNodeList nodes = gbXMLdocs[ns].SelectNodes("/gbXMLv5:gbXML", gbXMLnsm[ns]);
StandardizeToUSIP(nodes, c, ref testlengthConversion, ref testareaConversion, ref testvolumeConversion, ref testLength, ref testArea, ref testVol);
}
else
{
XmlNodeList nodes = gbXMLdocs[ns].SelectNodes("/gbXMLv5:gbXML", gbXMLnsm[ns]);
StandardizeToUSIP(nodes, c, ref standardlengthConversion, ref standardareaConversion, ref standardvolConversion, ref standardLength, ref standardArea, ref standardVol);
}
}
//TODO: Add a summary of the Unit of Measures stuff above to the final result
//Create a Log file that logs the success or failure of each test.
//Eventually maybe I want to create a little HTML factory
output = "";
log = "";
table += "<div class='container'>" +
"<h3>" + "Test Sections" + "</h3>";
table += "<table class='table table-bordered'>";
table += "<tr class='info'>" +
"<td>" + "Test Section Name" + "</td>" +
"<td>" + "Standard Result" + "</td>" +
"<td>" + "Test File Result" + "</td>" +
"<td>" + "Tolerances" + "</td>" +
"<td>" + "Pass/Fail" + "</td>" +
"</tr>";
string units;
DOEgbXMLReportingObj report = new DOEgbXMLReportingObj();
CampusReport camprep = new CampusReport();
//this string I can manipulate to produce the final test output
string menujson = JsonConvert.SerializeXmlNode(gbXMLStandardFile);
//prepare json for view
menujson = MakeViewJson(menujson);
gbr.menu = menujson;
gbr.CampusReport = camprep;
report.standResult = new List<string>();
report.testResult = new List<string>();
report.idList = new List<string>();
report.MessageList = new List<string>();
report.TestPassedDict = new Dictionary<string, bool>();
//Set up the Global Pass/Fail criteria for the test case file
TestCriteria = new DOEgbXMLTestCriteriaObject();
TestCriteria.InitializeTestCriteriaWithTestName(testToRun);
//needed specially for area and volume tests
DOEgbXMLTestDetail afile = TestDetail.TestDetailList.Find(x => x.testName == TestToRun);
BuildingSummary bs = new BuildingSummary();
bs.FileType = "Standard";
camprep.BuildingSummary.Add(bs);
BuildingSummary bst = new BuildingSummary();
bst.FileType = "Test";
camprep.BuildingSummary.Add(bst);
//Test 2 execute
//report.tolerance = DOEgbXMLBasics.Tolerances.AreaTolerance;
//report.testType = TestType.Building_Area;
//units = DOEgbXMLBasics.MeasurementUnits.sqft.ToString();
//report = GetBuildingArea(gbXMLdocs, gbXMLnsm, report, validatorArea, testArea, testareaConversion, standardareaConversion);
logger.Info("START: BUILDING AREA TEST");
var baresult = GetBuildingArea(gbXMLdocs, gbXMLnsm, ref camprep, validatorArea, testArea, testareaConversion, standardareaConversion, DOEgbXMLBasics.Tolerances.AreaPercentageTolerance, afile );
if(!baresult)
{
camprep.BuildingSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
}
logger.Info("END: BUILDING AREA TEST");
//GetBuildingArea(gbXMLdocs,gbXMLnsm,)
//AddToOutPut("Building Area Test Passed: ", report, true);
//Test 3 execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.SpaceCountTolerance;
//report.testType = TestType.Space_Count;
//units = DOEgbXMLBasics.MeasurementUnits.spaces.ToString();
//report = GetBuildingSpaceCount(gbXMLdocs, gbXMLnsm, report, units);
logger.Info("START: BUILDING SPACE COUNT TEST");
SpacesSummary ssm = new SpacesSummary();
ssm.FileType = "Standard";
camprep.SpacesSummary.Add(ssm);
SpacesSummary ssmt = new SpacesSummary();
ssmt.FileType = "Test";
camprep.SpacesSummary.Add(ssmt);
var spctResult = GetBuildingSpaceCount(gbXMLdocs, gbXMLnsm, "", DOEgbXMLBasics.Tolerances.SpaceCountTolerance, ref camprep);
if(!spctResult)
{
camprep.BuildingSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
camprep.SpacesSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
}
logger.Info("END: BUILDING SPACE COUNT TEST");
//AddToOutPut("Building Space Quantity Count Test Passed: ", report, true);
// Building Stories Tests....
////Test 4 execute
//report.Clear();
report.tolerance = DOEgbXMLBasics.Tolerances.LevelCountTolerance;
//report.testType = TestType.Building_Story_Count;
//units = DOEgbXMLBasics.MeasurementUnits.levels.ToString();
//report = GetBuildingStoryCount(gbXMLdocs, gbXMLnsm, report, units);
logger.Info("START: Building Storey Count Test");
var blstctresult = GetBuildingStoryCount(gbXMLdocs, gbXMLnsm, ref camprep, DOEgbXMLBasics.Tolerances.LevelCountTolerance);
if(!blstctresult)
{
camprep.BuildingSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
//TODO: Need a Building Story Summary Field
}
logger.Info("END: Building Storey Count Test");
//AddToOutPut("Building Story Count Test Passed: ", report, true);
//Test 5 execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.LevelHeightTolerance;
//report.testType = TestType.Building_Story_Z_Height;
//units = DOEgbXMLBasics.MeasurementUnits.ft.ToString();
report = GetStoryHeights(gbXMLdocs, gbXMLnsm, report, validatorLength, testLength, testlengthConversion, standardlengthConversion);
logger.Info("START: Building Storey Height Test");
var storyHeightsres = GetStoryHeights(gbXMLdocs, gbXMLnsm, ref camprep, validatorLength, testLength, testlengthConversion, standardlengthConversion, DOEgbXMLBasics.Tolerances.LevelHeightTolerance);
if (!storyHeightsres)
{
camprep.BuildingSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
//TODO: Need a Building Story Summary Field
}
logger.Info("END: Building Storey Height Test");
//AddToOutPut("Building Story Z-Height Test: ", report, true);
//Test 6 execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.VectorAngleTolerance;
//report.testType = TestType.Building_Story_PolyLoop_RHR;
//units = "degrees";
//report = TestBuildingStoryRHR(gbXMLdocs, gbXMLnsm, report, units);
logger.Info("START: Building Story Right Hand Rule Test.");
var blstRHResult = TestBuildingStoryRHR(gbXMLdocs, gbXMLnsm, ref camprep);
if(!blstRHResult)
{
//this method has no bearing on the overall pass or fail tests.
//camprep.BuildingSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
//TODO: Need a Building Story Summary Field
}
logger.Info("END: Building Story Right Hand Rule Test.");
//AddToOutPut("Building Story PolyLoop Right Hand Rule Test Result:", report, true);
//String spShellGeometrySurfaceNum = TestShellGeomSurfaceNum(gbXMLTestFile, gbXMLns);
//Space Tests .............................................................
//Test 7 execute
//only needs to test the test file
//report.Clear();
//report.testType = TestType.SpaceId_Match_Test;
logger.Info("START: UNIQUE SPACE ID TEST");
var spaceIDresults = UniqueSpaceIdTest(gbXMLdocs, gbXMLnsm, ref camprep);
if(!spaceIDresults)
{
camprep.SpacesSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
}
logger.Info("END: UNIQUE SPACE ID TEST");
//AddToOutPut("SpaceId Match Test: ", report, true);
//Test 8 execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.SpaceAreaTolerance;
//report.testType = TestType.Space_Area;
//units = DOEgbXMLBasics.MeasurementUnits.sqft.ToString();
logger.Info("START: SPACE AREAS TEST");
//report = TestSpaceAreas(gbXMLdocs, gbXMLnsm, report, validatorArea, testArea, testareaConversion,standardareaConversion,afile);
var result = TestSpaceAreas(gbXMLdocs, gbXMLnsm, ref camprep, validatorArea, testArea, testareaConversion, standardareaConversion, afile, DOEgbXMLBasics.Tolerances.SpaceAreaTolerance);
if(!result)
{
camprep.SpacesSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
//gbxml detailed compliance results?
}
logger.Info("END: SPACE AREAS TEST");
//AddToOutPut("Space Areas Test: ", report, true);
//Test 9 execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.VolumeTolerance;
//report.testType = TestType.Space_Volume;
//units = DOEgbXMLBasics.MeasurementUnits.cubicft.ToString();
logger.Info("START: SPACE VOLUMES TEST");
//report = TestSpaceVolumes(gbXMLdocs, gbXMLnsm, report, validatorVol, testVol, testvolumeConversion,standardvolConversion,afile);
var volresult = TestSpaceVolumes(gbXMLdocs, gbXMLnsm, ref camprep, validatorVol, testVol, testvolumeConversion, standardvolConversion, afile, DOEgbXMLBasics.Tolerances.VolumePercentageTolerance);
logger.Info("END: SPACE VOLUMES TEST");
if (!volresult)
{
camprep.SpacesSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
//gbxml detailed compliance results?
}
//AddToOutPut("Space Volumes Test: ", report, true);
//Test 10 Execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.VectorAngleTolerance;
//report.testType = TestType.Shell_Geom_RHR;
//units = "degrees";
//report = TestShellGeomPLRHR(gbXMLdocs, gbXMLnsm, report, units);
//AddToOutPut("Shell Geometry RHR Test: ",report);
//Surface Element tests
//deprecating all counts tests as criteria for passing and failing. Use this now only to indicate counts in the surfaces summary
////Test 11 Execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.SurfaceCountTolerance;
//report.testType = TestType.Total_Surface_Count;
//units = "";
//report = GetSurfaceCount(gbXMLdocs, gbXMLnsm, report, units);
//AddToOutPut("Surface Count Test Result: ", report, true);
////Surface Element tests
////Test 12 Execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.ExteriorWallCountTolerance;
//report.testType = TestType.Exterior_Wall_Surface_Count;
//units = "";
SurfaceSummary ss = new SurfaceSummary();
ss.FileType = "Standard";
camprep.SurfacesSummary.Add(ss);
SurfaceSummary sst = new SurfaceSummary();
sst.FileType = "Test";
camprep.SurfacesSummary.Add(sst); //initialization of summaries complete
logger.Info("START: EXTERIOR WALL COUNT");
//report = GetEWSurfaceCount(gbXMLdocs, gbXMLnsm, report, units);
var ewctresult = GetEWSurfaceCount(gbXMLdocs, gbXMLnsm, ref camprep);
logger.Info("END: EXTERIOR WALL COUNT");
if (!ewctresult)
{
//do nothing, it has no consequence for now
//gbxml detailed compliance results?
}
//AddToOutPut("Exterior Wall Surface Count Test Result: ", report, true);
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.SurfaceCountTolerance;
//report.testType = TestType.Underground_Surface_Count;
//units = "";
//report = GetUGSurfaceCount(gbXMLdocs, gbXMLnsm, report, units);
logger.Info("START: UNDERGROUND WALL COUNT");
var ugwctresult = GetUGSurfaceCount(gbXMLdocs, gbXMLnsm, ref camprep);
if (!ugwctresult)
{
//do nothing, it has no consequence for now
//gbxml detailed compliance results?
}
logger.Info("END: UNDERGROUND WALL COUNT");
//AddToOutPut("Underground Wall Count Test Result: ", report, true);
logger.Info("START: SLABONGRADE COUNT");
var sogctresult = GetSOGSurfaceCount(gbXMLdocs, gbXMLnsm, ref camprep);
if (!sogctresult)
{
//do nothing, it has no consequence for now
//gbxml detailed compliance results?
}
logger.Info("END: SLABONGRADE WALL COUNT");
////Surface Element tests
////Test 13 Execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.InteriorWallCountTolerance;
//report.testType = TestType.Interior_Wall_Surface_Count;
//units = "";
logger.Info("START: INTERIOR WALL COUNT");
//report = GetIWSurfaceCount(gbXMLdocs, gbXMLnsm, report, units);
var iwctresult = GetIWSurfaceCount(gbXMLdocs, gbXMLnsm, ref camprep);
if (!iwctresult)
{
//do nothing, it has no consequence for now
//gbxml detailed compliance results?
}
logger.Info("END: INTERIOR WALL COUNT");
//AddToOutPut("Interior Wall Surface Count Test Result: ", report, true);
////Surface Element tests
////Test 13 Execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.InteriorFloorCountTolerance;
//report.testType = TestType.Interior_Floor_Surface_Count;
//units = "";
//report = GetIFSurfaceCount(gbXMLdocs, gbXMLnsm, report, units);
logger.Info("START: INTERIOR FLOOR/CEILING COUNT");
var ifctresult = GetIFSurfaceCount(gbXMLdocs, gbXMLnsm, ref camprep);
if (!ifctresult)
{
//do nothing, it has no consequence for now
//gbxml detailed compliance results?
}
logger.Info("END: INTERIOR FLOOR/CEILING COUNT");
//AddToOutPut("Interior Floor Surface Count Test Result: ", report, true);
////Surface Element tests
////Test 14 Execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.InteriorWallCountTolerance;
//report.testType = TestType.Roof_Surface_Count;
//units = "";
//report = GetRoofSurfaceCount(gbXMLdocs, gbXMLnsm, report, units);
logger.Info("START: ROOF COUNT");
var irctresult = GetRoofSurfaceCount(gbXMLdocs, gbXMLnsm, ref camprep);
if (!irctresult)
{
//do nothing, it has no consequence for now
//gbxml detailed compliance results?
}
logger.Info("END: ROOF COUNT");
//AddToOutPut("Roof Surface Count Test Result: ", report, true);
////Surface Element tests
////Test 15 Execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.InteriorWallCountTolerance;
//report.testType = TestType.Shading_Surface_Count;
//units = "";
//report = GetShadeSurfaceCount(gbXMLdocs, gbXMLnsm, report, units);
logger.Info("START: SHADING DEVICE COUNT");
var shadectresult = GetShadeSurfaceCount(gbXMLdocs, gbXMLnsm, ref camprep);
if (!shadectresult)
{
//do nothing, it has no consequence for now
//gbxml detailed compliance results?
}
//AddToOutPut("Shading Surface Count Test Result: ", report, true);
logger.Info("END: SHADING DEVICE COUNT");
////Test 16 Execute
//report.Clear();
//report.tolerance = DOEgbXMLBasics.Tolerances.AirWallCountTolerance;
//report.testType = TestType.Air_Surface_Count;
//units = "";
//report = GetAirSurfaceCount(gbXMLdocs, gbXMLnsm, report, units);
logger.Info("START: AIR SURFACE COUNT");
var asctresult = GetAirSurfaceCount(gbXMLdocs, gbXMLnsm, ref camprep);
if (!asctresult)
{
//do nothing, it has no consequence for now
//gbxml detailed compliance results?
}
logger.Info("END: AIR SURFACE COUNT");
//AddToOutPut("Air Surface Count Test Result: ", report, true);
#region surface detailed test
//Jan 31-2012: We may not want to perform these if the surface counts fail, but for now, we will include these tests
//Detailed Surface Checks
//Store Surface Element Information
List<SurfaceDefinitions> TestSurfaces = new List<SurfaceDefinitions>();
XmlDocument TestFile = gbXMLdocs[0];
XmlNamespaceManager TestNSM = gbXMLnsm[0];
List<SurfaceDefinitions> StandardSurfaces = new List<SurfaceDefinitions>();
XmlDocument StandardFile = gbXMLdocs[1];
XmlNamespaceManager StandardNSM = gbXMLnsm[1];
TestSurfaces = GetFileSurfaceDefs(TestFile, TestNSM);
StandardSurfaces = GetFileSurfaceDefs(StandardFile, StandardNSM);
string TestSurfaceTable = " <div class='container'><table class='table table-bordered'>";
TestSurfaceTable += "<tr class='info'>" +
"<td>" + "Test Section Name" + "</td>" +
"<td>" + "Stand Surface ID" + "</td>" +
"<td>" + "Test Surface ID" + "</td>" +
"<td>" + "Stand Surface Tilt" + "</td>" +
"<td>" + "Test Surface Tilt" + "</td>" +
"<td>" + "Stand Surface Azimuth" + "</td>" +
"<td>" + "Test Surface Azimuth" + "</td>" +
"<td>" + "Stand Surface Height" + "</td>" +
"<td>" + "Test Surface Height" + "</td>" +
"<td>" + "Stand Surface Width" + "</td>" +
"<td>" + "Test Surface Width" + "</td>" +
"<td>" + "Pass/Fail" + "</td>" +
"</tr>";
//Test Surfaces Planar Test
//all polyloops must be such that the surface defined by the coordinates is planar
//report.Clear();
//report.testType = TestType.Surface_Planar_Test;
logger.Info("START: SURFACE PLANARITY TEST");
//report = TestSurfacePlanarTest(TestSurfaces, report);
var planarityResult = TestSurfacePlanarTest(TestSurfaces,ref camprep);
if (!planarityResult)
{
camprep.SurfacesSummary.Find(x => x.FileType == "Standard").PassedAllTests = false;
//gbxml detailed compliance results?
}
logger.Info("END: SURFACE PLANARITY TEST");
//if (!report.passOrFail && mustBePlanar)
//{
// AddToOutPut("Test File Planar Surface Check: ", report, true);
// report.Clear();
//}
//only run detailed surface checks if the surfaces are planar
if(planarityResult)
{
//<For each surface in the Standard File, try to find a match for this surface in the test file>
//Written Jan 31, 2013 by Chien Si Harriman, Senior Product Manager, Carmel Software Corporation
//Execute Tests
// globalMatchObject.MatchedSurfaceIds = new Dictionary<string, List<string>>();
int i = 1;
foreach (SurfaceDefinitions surface in StandardSurfaces)
{
report.Clear();
DetailedSurfaceSummary ssSummary = new DetailedSurfaceSummary();
//multiple tolerances used
report.testType = TestType.Detailed_Surface_Checks;
report.subTestIndex = i;
if (surface.SurfaceId == "su-zone_5_Srf_7" || surface.SurfaceId == "su-zone_0_Srf_0")
{
var d = 1;
}
logger.Info("START: DETAILED SURFACE TEST");
GetSurfaceMatches(surface, TestSurfaces, ref ssSummary, validatorLength, testLength, testlengthConversion, standardlengthConversion, validatorArea, testArea, testareaConversion, standardareaConversion);
logger.Info("END: DETAILED SURFACE TEST");
camprep.SurfacesReport.Add(ssSummary);
}
#endregion
#region opending detailed test
//openings detailed tests
List<OpeningDefinitions> TestOpenings = new List<OpeningDefinitions>();
XmlDocument testFile = gbXMLdocs[0];
XmlNamespaceManager testNSM = gbXMLnsm[0];
List<OpeningDefinitions> StandardOpenings = new List<OpeningDefinitions>();
XmlDocument standardFile = gbXMLdocs[1];
XmlNamespaceManager standardNSM = gbXMLnsm[1];
TestOpenings = GetFileOpeningDefs(TestFile, TestNSM);
StandardOpenings = GetFileOpeningDefs(StandardFile, StandardNSM);
string TestOpeningTable = "";
report.Clear();
report.testType = TestType.Opening_Planar_Test;
report = TestOpeningPlanarTest(TestOpenings, report);
if (!report.passOrFail)
{
AddToOutPut("Test File Planar Opening Check: ", report, true);
report.Clear();
}
//only run detailed opening checks if the opening are planar
else
{
TestOpeningTable = "<div class='container'><table class='table table-bordered'>";
TestOpeningTable += "<tr class='info'>" +
"<td>" + "Test Section Name" + "</td>" +
"<td>" + "Standard Opening Id" + "</td>" +
"<td>" + "Test Opening Id" + "</td>" +
"<td>" + "Standard Parent Surface Id" + "</td>" +
"<td>" + "Test Parent Surface Id" + "</td>" +
"<td>" + "Standard Parent Azimuth" + "</td>" +
"<td>" + "Test Parent Azimuth" + "</td>" +
"<td>" + "Standard Parent Tilt" + "</td>" +
"<td>" + "Test Parent Tilt" + "</td>" +
"<td>" + "Standard Surface Area" + "</td>" +
"<td>" + "Test Surface Area" + "</td>" +
"<td>" + "Pass/Fail" + "</td>" +
"</tr>";
globalMatchObject.MatchedOpeningIds = new Dictionary<string, List<string>>();
int j = 1;
//if no openings remove the table.
if (StandardOpenings.Count < 1)
TestOpeningTable = "";
//compare the openings
foreach (OpeningDefinitions opening in StandardOpenings)
{
report.Clear();
report.testType = TestType.Detailed_Opening_Checks;
report.subTestIndex = j;
report = GetPossibleOpeningMatches(opening, TestOpenings, report);
AddToOutPut("Test 17 for Opening number " + j + " Result: ", report, false);
foreach (OpeningDefinitions to in TestOpenings)
{
if (globalMatchObject.MatchedOpeningIds.ContainsKey(opening.OpeningId))
{
foreach (string id in globalMatchObject.MatchedOpeningIds[opening.OpeningId])
{
if (to.OpeningId == id)
{
if (report.passOrFail)
TestOpeningTable += "<tr class='success'>" +
"<td>" + "<a href='TestDetailPage.aspx?type=" + (int)report.testType + "&subtype=" + report.subTestIndex + "' target='_blank'>" +
"Detailed Opening Checks " + report.subTestIndex + "</a>" + "</td>" +
"<td>" + opening.OpeningId + "</td>" +
"<td>" + to.OpeningId + "</td>" +
"<td>" + opening.ParentSurfaceId + "</td>" +
"<td>" + to.ParentSurfaceId + "</td>" +
"<td>" + String.Format("{0:#,0.00}", opening.ParentAzimuth) + "</td>" +
"<td>" + String.Format("{0:#,0.00}", to.ParentAzimuth) + "</td>" +
"<td>" + String.Format("{0:#,0.00}", opening.ParentTilt) + "</td>" +
"<td>" + String.Format("{0:#,0.00}", to.ParentTilt) + "</td>" +
"<td>" + String.Format("{0:#,0.00}", opening.surfaceArea) + "</td>" +
"<td>" + String.Format("{0:#,0.00}", to.surfaceArea) + "</td>" +
"<td>" + "Pass" + "</td>" +
"</tr>";
}
}
}
}
//if didn't find match means it failed the test
if (!report.passOrFail)
TestOpeningTable += "<tr class='error'>" +
"<td>" + "<a href='TestDetailPage.aspx?type=" + (int)report.testType + "&subtype=" + report.subTestIndex + "' target='_blank'>" +
"Detailed Opening Checks " + report.subTestIndex + "</a>" + "</td>" +
"<td>" + opening.OpeningId + "</td>" +
"<td>" + "---" + "</td>" +
"<td>" + opening.ParentSurfaceId + "</td>" +
"<td>" + "---" + "</td>" +
"<td>" + String.Format("{0:#,0.00}", opening.ParentAzimuth) + "</td>" +
"<td>" + "---" + "</td>" +
"<td>" + String.Format("{0:#,0.00}", opening.ParentTilt) + "</td>" +
"<td>" + "---" + "</td>" +
"<td>" + String.Format("{0:#,0.00}", opening.surfaceArea) + "</td>" +
"<td>" + "---" + "</td>" +
"<td>" + "Fail" + "</td>" +
"</tr>";
j += 1;
}
}
TestOpeningTable += "</table></div><br/>";
#endregion
//close table
table += "</table></div><br/>";
//add TestSurfaceTable
table += TestSurfaceTable + TestOpeningTable;
}
//CreateSummaryTable();
((FileAppender)LogManager.GetCurrentLoggers()[0].Logger.Repository.GetAppenders()[0]).Close();
}
//Created July 2016 by Chien Si Harriman. Note the area tolerance checks are based on percentage tolerances and not absolute tolerances.
private void GetSurfaceMatches(SurfaceDefinitions surface, List<SurfaceDefinitions> TestSurfaces, ref DetailedSurfaceSummary ssSummary,Conversions.lengthUnitEnum standardLengthUnits, Conversions.lengthUnitEnum testLengthUnits, double testlengthConversion, double standardlengthConversion, Conversions.areaUnitEnum standardAreaUnits, Conversions.areaUnitEnum testAreaUnits, double testareaConversion, double standardareaConversion)
{
try{
List<SurfaceDefinitions> possiblesList1 = new List<SurfaceDefinitions>();
List<SurfaceDefinitions> possiblesList2 = new List<SurfaceDefinitions>();
bool adjSpaceIdMatch = false;
bool isLowTiltObject = false;
bool isHighTiltObject = false;
bool interiorWallFlipped = false;
bool issurfaceRegular = false;
bool istestSurfaceRegular = false;
//try to find a surface in the test file that has the same:
//adjacent space Id signature
//surfaceType
//free list is 1
//list 2 is not used
ssSummary.ID = surface.SurfaceId;
ssSummary.AreaUnits = "SquareFeet"; //TODO, try to remove this hardcoding.
ssSummary.TotalSurfaceArea = GetSurfaceArea(surface,standardareaConversion);
#region
logger.Info("SURFACE ID: " + surface.SurfaceId);
logger.Info("START SUBTEST: AdjacencyId check.");
for(int ts = 0; ts<TestSurfaces.Count;ts++)
{
SurfaceDefinitions testSurface = TestSurfaces[ts];
//has to have the same number of Adjacent Space Ids
if (testSurface.AdjSpaceId.Count == surface.AdjSpaceId.Count)
{
//an exception for a shading device
if (surface.AdjSpaceId.Count == 0) {
adjSpaceIdMatch = true; //must be set to true for if statements below to work.
logger.Info("SHADING EXCEPTION: " + surface.SurfaceId + " is a shading device. No AdjacencyId checks performed.");
}
//has to have the same order of adjacent space id strings to qualify. This method assumes the strings are identical
if(surface.AdjSpaceId.Count == 1)
{
if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[0]) { adjSpaceIdMatch = true; logger.Info("TEST SURFACE: "+ testSurface.SurfaceId+ " AdjacencyID MATCH SUCCESS"); }
else { logger.Info("TEST SURFACE: "+ testSurface.SurfaceId + " AdjacencyID MATCH FAILED"); }
}
if(surface.AdjSpaceId.Count == 2)
{
if(surface.SurfaceType == "Ceiling" && testSurface.SurfaceType == "InteriorFloor")
{
if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[1] && surface.AdjSpaceId[1] == testSurface.AdjSpaceId[0])
{
adjSpaceIdMatch = true;
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH SUCCESS");
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH FAILED"); }
}
else if (surface.SurfaceType == "InteriorFloor" && testSurface.SurfaceType == "Ceiling")
{
if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[1] && surface.AdjSpaceId[1] == testSurface.AdjSpaceId[0])
{
adjSpaceIdMatch = true;
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH SUCCESS");
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH FAILED"); }
}
else if (surface.SurfaceType == "InteriorWall" && testSurface.SurfaceType == "InteriorWall")
{
if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[0] && surface.AdjSpaceId[1] == testSurface.AdjSpaceId[1])
{
adjSpaceIdMatch = true;
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH SUCCESS");
}
else if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[1] && surface.AdjSpaceId[1] == testSurface.AdjSpaceId[0])
{
adjSpaceIdMatch = true;
interiorWallFlipped = true;
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH SUCCESS");
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH FAILED"); }
}
else
{
if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[0] && surface.AdjSpaceId[1] == testSurface.AdjSpaceId[1])
{
adjSpaceIdMatch = true;
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH SUCCESS");
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH FAILED"); }
}
}
}
else
{
if (surface.SurfaceType == "SlabOnGrade") //slab on grade for some reason we see sometimes with two adjacent space ids, depending on the vendor
{
if(testSurface.AdjSpaceId.Count == 2 && surface.AdjSpaceId.Count == 2)
{
if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[0] && surface.AdjSpaceId[1] == testSurface.AdjSpaceId[1])
{
adjSpaceIdMatch = true;
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH SUCCESS");
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH FAILED"); }
}
else if (surface.AdjSpaceId.Count == 2)
{
if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[0] && surface.AdjSpaceId[1] == testSurface.AdjSpaceId[0])
{
adjSpaceIdMatch = true;
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH SUCCESS");
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH FAILED"); }
}
else
{
if (surface.AdjSpaceId[0] == testSurface.AdjSpaceId[0])
{
adjSpaceIdMatch = true;
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH SUCCESS");
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " AdjacencyID MATCH FAILED"); }
}
}
else
{
logger.Info("TEST SURFACE: AdjacencyID MATCH FAILED. Surfaces should have the same number of Adjacent Space Ids, with the one allowance we give for Slab on Grade.");
}
}
if (adjSpaceIdMatch)
{
logger.Info("END SUBTEST: AdjacencyId check.");
logger.Info("START SUBTEST: surfaceType check.");
if(!IsHighTiltSurface(surface) && !IsLowTiltSurface(surface))
{
if(surface.SurfaceType == testSurface.SurfaceType)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH SUCCESS");
possiblesList1.Add(testSurface);
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH FAILED"); }
}
else
{
if(IsLowTiltSurface(surface)) isLowTiltObject = true;
if (IsHighTiltSurface(surface)) isHighTiltObject = true;
if(IsLowTiltSurface(testSurface) && isHighTiltObject)
{
if(testSurface.SurfaceType == "Ceiling" && surface.SurfaceType == "InteriorFloor")
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH SUCCESS");
possiblesList1.Add(testSurface);
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH FAILED");
}
}
else if(IsHighTiltSurface(testSurface) && isHighTiltObject)
{
if(surface.SurfaceType == testSurface.SurfaceType)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH SUCCESS");
possiblesList1.Add(testSurface);
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH FAILED"); }
}
else if(IsLowTiltSurface(testSurface) && isLowTiltObject)
{
if (surface.SurfaceType == testSurface.SurfaceType)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH SUCCESS");
possiblesList1.Add(testSurface);
}
else { logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH FAILED"); }
}
else if (IsHighTiltSurface(testSurface) && isLowTiltObject)
{
if(testSurface.SurfaceType == "InteriorFloor" && surface.SurfaceType == "Ceiling")
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH SUCCESS");
possiblesList1.Add(testSurface);
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " surfaceType MATCH FAILED");
}
}
}
adjSpaceIdMatch = false; //must reset it to make sure it will find other valid surfaces for only the proper adjacency.
}
}
logger.Info("END SUBTEST: surfaceType check.");
// #reporting
if (possiblesList1.Count == 1)
{
logger.Info("TEST SUMMARY: Based on a comparison of the surface Type and Adjacent SpaceIds, there is " + possiblesList1.Count.ToString() + " surface in the test file that is a possible match for " + surface.SurfaceId + " of the Standard File.");
}
else if (possiblesList1.Count > 1)
{
logger.Info("TEST SUMMARY: Based on a comparison of the surface Type and Adjacent SpaceIds, there are " + possiblesList1.Count.ToString() + " surfaces in the test file that are possible matches for " + surface.SurfaceId + " of the Standard File.");
}
else
{
logger.Error("TEST SUMMARY: In the vendor test file, no matches could be found for this surface that have the same AdjacentSpaceId(s) and SurfaceType.");
ssSummary.FoundMatch = false;
return;
}
#endregion
//there is at least one surface that matches the above criteria
//now checking for tilt and azimuth criteria, as these have to match
//TODO: consider removing, minor clean up
if (possiblesList1.Count > 0)
{
logger.Info("START SUBTEST: Azimuth and Tilt check.");
foreach (SurfaceDefinitions testSurface in possiblesList1)
{
double tiltDifference = 0;
double azimuthDifference = Math.Abs(testSurface.Azimuth - surface.Azimuth);
#region
if(isLowTiltObject)
{
if(IsLowTiltSurface(testSurface)) //they are the same, both have small tilts
{
tiltDifference = Math.Abs(testSurface.Tilt - surface.Tilt);
}
else //they are 180 degrees different, and the test surface is a high tilt while the standard is low tilt
{
if (testSurface.SurfaceType == "InteriorFloor")
{
tiltDifference = Math.Abs(Math.Abs(testSurface.Tilt - 180) - surface.Tilt);
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt MATCH FAILED");
logger.Info("PROGRAMMER'S NOTE: Expecting test surface type to be Interior Floor");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
logger.Info("TEST SURFACE: "+testSurface.SurfaceId + " has been removed as a candidate for matching.");
continue;
}
}
//no azimuth tests for horizontal surfaces
if (tiltDifference > DOEgbXMLBasics.Tolerances.SurfaceTiltTolerance)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt MATCH FAILED");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " has been removed as a candidate for matching.");
continue;
}
//if the is within tolerance
else
{
//if the surface is horizontal, just add to the free List because we don't check for azimuth in this case
if (surface.Tilt == 0)
{
possiblesList2.Add(testSurface);
if (tiltDifference == 0)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt MATCH SUCCESS:PERFECT");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt MATCH SUCCESS");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
}
else
{
logger.Info("START SUBTEST: azimuth checks.");
//check the azimuth
if (azimuthDifference > DOEgbXMLBasics.Tolerances.SurfaceAzimuthTolerance)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Azimuth MATCH FAILED");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " has been removed as a candidate for matching.");
continue;
}
//if the tilt and azimuth is within tolerance
else
{
//add to the free List
possiblesList2.Add(testSurface);
if (tiltDifference == 0 && azimuthDifference == 0)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Azimuth MATCH SUCCESS:PERFECT");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Azimuth MATCH SUCCESS");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
}
}
}
}
else if (isHighTiltObject)
{
if(IsHighTiltSurface(testSurface)) //both high tilt interior surfaces
{
tiltDifference = Math.Abs(testSurface.Tilt - surface.Tilt);
}
else //standard is high tilt, test is low tilt
{
if(testSurface.SurfaceType == "Ceiling")
{
tiltDifference = Math.Abs(Math.Abs(testSurface.Tilt - 180) - surface.Tilt);
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt MATCH FAILED");
logger.Info("PROGRAMMER' NOTE: Expected surfaceType to be Ceiling.");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " has been removed as a candidate for matching.");
continue;
}
}
//no azimuth tests
if (tiltDifference > DOEgbXMLBasics.Tolerances.SurfaceTiltTolerance) //azimuth no longer matters for these surfaces
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt MATCH FAILED");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " has been removed as a candidate for matching.");
continue;
}
//if the tilt and azimuth is within tolerance
else
{
//if the surface is horizontal, just add to the free List because we don't check for azimuth in this case
if (surface.Tilt == 180)
{
possiblesList2.Add(testSurface);
if (tiltDifference == 0)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt MATCH SUCCESS:PERFECT");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt MATCH PERFECT");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
}
else
{
//check the azimuth
if (azimuthDifference > DOEgbXMLBasics.Tolerances.SurfaceAzimuthTolerance)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Azimuth MATCH FAILED");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " has been removed as a candidate for matching.");
continue;
}
//if the tilt and azimuth is within tolerance
else
{
//add to the free List
possiblesList2.Add(testSurface);
if (tiltDifference == 0 && azimuthDifference == 0)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Azimuth MATCH SUCCESS:PERFECT");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Azimuth MATCH SUCCESS");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
}
}
}
}
#endregion //the surface is neither a ceiling nor a floor, it is just something regular
else
{
azimuthDifference = Math.Abs(testSurface.Azimuth - surface.Azimuth);
if (interiorWallFlipped) //both high tilt interior surfaces
{
azimuthDifference = Math.Abs(Math.Abs(testSurface.Azimuth - surface.Azimuth) - 180); //180 is needed because they should be separated by 180
}
tiltDifference = Math.Abs(testSurface.Tilt - surface.Tilt);
//if the tilt and azimuth is outside of tolerance
if (tiltDifference > DOEgbXMLBasics.Tolerances.SurfaceTiltTolerance || azimuthDifference > DOEgbXMLBasics.Tolerances.SurfaceAzimuthTolerance)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt Or Azimuth MATCH FAILED");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " has been removed as a candidate for matching.");
continue;
}
//if the tilt and azimuth is within tolerance
else
{
//add to the free List
possiblesList2.Add(testSurface);
if (tiltDifference == 0 && azimuthDifference == 0)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt And Azimuth MATCH SUCCESS:PERFECT");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Tilt And Azimuth MATCH SUCCESS");
logger.Debug("Test file surface (Azimuth, Tilt): (" + testSurface.Azimuth.ToString() + "," + testSurface.Tilt.ToString() + ")");
logger.Debug("Standard file surface (Azimuth, Tilt): (" + surface.Azimuth.ToString() + "," + surface.Tilt.ToString() + ")");
}
}
}
logger.Info("END SUBTEST: Azimuth and Tilt check.");
}
}
// //report to the user that no matches could be found
else
{
logger.Error("TEST SUMMARY: In the test file, surfaces could be found that match the standard file's AdjacentSpaceId and SurfaceType, but of these matches, none could be identified that also have a tilt or azimuth that exactly matches the standard file's, or is within the allowable tolerance.");
ssSummary.FoundMatch = false;
return;
}
//clear the first list
possiblesList1.Clear();
//start to loop through the new refined list
//generally want to look at the polyLoop coordinates
//list 2 is analyzed
//list 1 is free
;
if (possiblesList2.Count > 0)
{
//simple method from this point forward is just to simply start doing a polyloop check
//check the standard surface PolyLoop and the test Surface(s) polyloop(s)
//check the absolute coordinates of the testSurface(s) polyloop(s)
if (possiblesList2.Count == 1)
{
logger.Info("PROGRAMMER'S INFO: Only one Surface Candidate remaining.");
//meaning there is only one candidate still available
//go on to test the polyLoop coordinates and the insertion point
possiblesList1.Add(possiblesList2[0]);
//this should mean theoretically that you can do a one for one comparison and do the simplistic check
possiblesList2.Clear();
//polyLoop absolute coordinates
//list 1 is analyzed
//list 2 is free
logger.Info("START SUBTEST: PolyLoop coordinate checks.");
#region
if (possiblesList1.Count > 0)
{
foreach (SurfaceDefinitions testSurface in possiblesList1)
{
//check the polyLoop coordinates
bool coordsMatch = false;
foreach (Vector.MemorySafe_CartCoord standardPolyLoopCoord in surface.PlCoords)
{
coordsMatch = GetPolyLoopCoordMatch(standardPolyLoopCoord, testSurface, surface.SurfaceId, testlengthConversion, standardlengthConversion);
if (coordsMatch)
{
continue;
}
else
{
logger.Info("TEST SURFACE: "+testSurface.SurfaceId+ " polyloop coordinate MATCH FAILED. It has been removed from the candidate list.");
break;
}
}
if (coordsMatch)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " polyloop coordinate MATCH SUCCESS.");
possiblesList2.Add(testSurface);
}
}
}
else
{
logger.Error("TEST SUMMARY: In the test file, no surfaces could be found that match standard file;s Surface Id: " + surface.SurfaceId + " AdjacentSpaceId(s), SurfaceType, Tilt, Azimuth, and Surface Area. Failed when attempting to match its polyloop coordinates.");
ssSummary.FoundMatch = false;
return;
}
logger.Info("END SUBTEST: PolyLoop coordinate checks.");
#endregion
possiblesList1.Clear();
issurfaceRegular = IsSurfaceRegular(surface);
//Insertion point tests.
if (!isHighTiltObject && !isLowTiltObject && issurfaceRegular) //no point in doing these checks if thing is not square and regular
#region
{
logger.Info("PROGRAMMER'S NOTE: Standard Surface is square or rectangle non-horizontal. Assumption that test surface candidate should also be same type of shape.");
logger.Info("START SUBTEST: Insertion Point Coordinate check.");
if (possiblesList2.Count > 0)
{
//check the insertion point coordinate
foreach (SurfaceDefinitions testSurface in possiblesList2)
{
//now match the differences
double insPtXDiff = Math.Abs((testSurface.InsertionPoint.X * testlengthConversion) - (surface.InsertionPoint.X * standardlengthConversion));
double insPtYDiff = Math.Abs((testSurface.InsertionPoint.Y * testlengthConversion) - (surface.InsertionPoint.Y * standardlengthConversion));
double insPtZDiff = Math.Abs((testSurface.InsertionPoint.Z * testlengthConversion) - (surface.InsertionPoint.Z * standardlengthConversion));
//TODO: this interior flipped algorithm could be improved vastly. How to tell if in lower left has not been solved.
if (interiorWallFlipped)
{
logger.Info("PROGRAMMER'S NOTE: The azimuths are flipped. Adjusting the insertion point test to factor this into account..");
//find the complimenting insertion point
for (int pt = 0; pt < testSurface.PlCoords.Count; pt++)
{
if (Math.Abs((surface.InsertionPoint.Z * standardlengthConversion) - (testSurface.PlCoords[pt].Z * testlengthConversion)) < DOEgbXMLBasics.Tolerances.SurfaceInsPtZTolerance)
{
if (Math.Abs((surface.InsertionPoint.X * standardlengthConversion) - testSurface.PlCoords[pt].X * testlengthConversion) < DOEgbXMLBasics.Tolerances.SurfaceInsPtXTolerance)
{
if (Math.Abs((surface.InsertionPoint.Y * standardlengthConversion) - testSurface.PlCoords[pt].Y * testlengthConversion) < DOEgbXMLBasics.Tolerances.SurfaceInsPtYTolerance)
{
//a match
insPtXDiff = Math.Abs((testSurface.PlCoords[pt].X * testlengthConversion) - (surface.InsertionPoint.X * standardlengthConversion));
insPtYDiff = Math.Abs((testSurface.PlCoords[pt].Y * testlengthConversion) - (surface.InsertionPoint.Y * standardlengthConversion));
insPtZDiff = Math.Abs((testSurface.PlCoords[pt].Z * testlengthConversion) - (surface.InsertionPoint.Z * standardlengthConversion));
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + "Insertion Point MATCH SUCCESS.");
possiblesList1.Add(testSurface);
break;
}
else
{
//didn't find a candidate
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + "Insertion Point did not Match.");
}
}
}
}
}
else
{
if (insPtXDiff > DOEgbXMLBasics.Tolerances.SurfaceInsPtXTolerance || insPtYDiff > DOEgbXMLBasics.Tolerances.SurfaceInsPtYTolerance || insPtZDiff > DOEgbXMLBasics.Tolerances.SurfaceInsPtZTolerance)
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Insertion Point MATCH FAILED. It has been removed as a candidate.");
continue;
}
else
{
//possible match
if (insPtXDiff == 0 && insPtYDiff == 0 && insPtZDiff == 0)
{
//perfect match
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Insertion Point MATCH SUCCESS:PERFECT");
possiblesList1.Add(testSurface);
}
else
{
logger.Info("TEST SURFACE: " + testSurface.SurfaceId + " Insertion Point MATCH SUCCESS");
possiblesList1.Add(testSurface);
}
}
}
}
}
else
{
logger.Error("TEST SUMMARY: In the test file, no surfaces could be found that match standard file's Surface Id: " + surface.SurfaceId + " AdjacentSpaceId(s), SurfaceType, Tilt, Azimuth, Surface Area, and PolyLoop Coordinates. Failed when matching PolyLoop coordinates.");
ssSummary.FoundMatch = false;
return;
}
possiblesList2.Clear();
logger.Info("END SUBTEST: Insertion point coordinate check.");
if (possiblesList1.Count == 1)
{
logger.Info("TEST SUMMARY: MATCH SUCCESS for Standard file surface id: " + surface.SurfaceId + " in the test file. Only one match was found to be within all the tolerances allowed.");
List<string> testFileSurfIds = new List<string>();
foreach (SurfaceDefinitions surf in possiblesList1) { testFileSurfIds.Add(surf.SurfaceId); }
globalMatchObject.MatchedSurfaceIds.Add(surface.SurfaceId, testFileSurfIds);
ssSummary.FoundMatch = true;
ssSummary.TestSurfaceIDs = testFileSurfIds;
ssSummary.TotalTestSurfaceArea = GetSurfaceArea(possiblesList1[0],testareaConversion);
return;
}
else if (possiblesList1.Count == 0)
{
logger.Error("TEST SUMMARY: No surfaces could be found that match standard file;s Surface Id: " + surface.SurfaceId + " AdjacentSpaceId(s), SurfaceType, Tilt, Azimuth, Surface Area, PolyLoop Coordinates, and Insertion Point. Failed when attempting to match the insertion point coordinates.");
ssSummary.FoundMatch = false;
return;
}
else if (possiblesList1.Count > 1)
{
logger.Error("TEST SUMMARY: Advanced Surface Test found more than one match for Standard file surface id: " + surface.SurfaceId + " in the test file. It was not possible to determine only one unique surface.");
ssSummary.FoundMatch = false;
return;
}
}
#endregion
else
{
if (possiblesList2.Count == 1) //we do not check insertion points for horizontal surfaces.
{
possiblesList1 = possiblesList2; //this is just to keep the below code consistent with convention.
logger.Info("TEST FILE SUCCESS: for Standard file surface id: " + surface.SurfaceId + " in the test file. Only one match was found to be within all the tolerances allowed.");
List<string> testFileSurfIds = new List<string>();
foreach (SurfaceDefinitions surf in possiblesList1) { testFileSurfIds.Add(surf.SurfaceId); }
globalMatchObject.MatchedSurfaceIds.Add(surface.SurfaceId, testFileSurfIds);
ssSummary.FoundMatch = true;
ssSummary.TestSurfaceIDs = testFileSurfIds;
ssSummary.TotalTestSurfaceArea = GetSurfaceArea(possiblesList1[0],testareaConversion);
return;
}
else if (possiblesList2.Count == 0)
{
logger.Error("TEST FILE FAILURE: No surfaces could be found that match standard file;s Surface Id: " + surface.SurfaceId + " AdjacentSpaceId(s), SurfaceType, Tilt, Azimuth, Surface Area, PolyLoop Coordinates, and Insertion Point. Failed when attempting to match the insertion point coordinates.");
ssSummary.FoundMatch = false;
return;
}
else if (possiblesList2.Count > 1)
{
logger.Error("TEST FILE FAILRE: Advanced Surface Test found more than one match for Standard file surface id: " + surface.SurfaceId + " in the test file. It was not possible to determine only one unique surface.");
ssSummary.FoundMatch = false;
return;
}
}
}
//more than one candidate still exists even after the adjacency test, surfaceType test, and tilt and azimuth tests, so filter through
#region
else
{
//check to see if the remaining area sums matches the standard surface area,
//and that the edges of the test surfaces do not overlap, etc.
//first try to find if the standard file has a regular rectangular or square profile
logger.Debug("More than one surface remains in the test subset.");
logger.Info("PROGRAMMER'S NOTE: Performing advanced surface bondary tests.");
//checks to see if the testSurface vertices all lie within the standard surface polygonal boundary
foreach(SurfaceDefinitions testSurface in possiblesList2)
{
logger.Info("Testing test surface " +testSurface.SurfaceId);
if(DoesSurfaceContainSurface(surface,testSurface,testlengthConversion,standardlengthConversion))
{
possiblesList1.Add(testSurface);
}
}
//now we check to see which of the remaining surfaces and their edges form a coherent surface.
//do their edges overlap? is the polygon self-intersecting?
//add the surface the the existing possibles list
possiblesList1.Insert(0, surface);
var edgeDict = FindMatchingEdges(possiblesList1);
if(EdgesAreValid(edgeDict))
{
//finally, we see if the total area of the remaining surfaces equals the area of the standard surface. If all this above has passed, it should not be an issue.
double standardArea = ssSummary.TotalSurfaceArea;
double testArea = 0;
//remove the zero index surface, because this is the standard surface
possiblesList1.RemoveAt(0);
//these are the remaining candidates
foreach(var ts in possiblesList1)
{
testArea += GetSurfaceArea(ts,testareaConversion);
}
if(Math.Abs(standardArea - testArea)/standardArea < DOEgbXMLBasics.Tolerances.AreaPercentageTolerance)
{
logger.Info("TEST FILE SUCCESS: for Standard file surface id: " + surface.SurfaceId + " in the test file. The wall candidates remaining meet the allowable gemoetry constraints.");
List<string> testFileSurfIds = new List<string>();
foreach (SurfaceDefinitions surf in possiblesList1) { testFileSurfIds.Add(surf.SurfaceId); }
ssSummary.FoundMatch = true;
ssSummary.TestSurfaceIDs = testFileSurfIds;
ssSummary.TotalTestSurfaceArea = testArea;
}
else
{
logger.Info("TEST FILE FAILURE: for Standard file surface id: " + surface.SurfaceId + " in the test file. The wall candidates remaining did not pass the area test.");
}
}
else
{
//problem
logger.Info("TEST FILE FAILURE: for Standard file surface id: " + surface.SurfaceId + " in the test file. The wall candidates remaining do not meet the allowable geometry constraints.");
List<string> testFileSurfIds = new List<string>();
foreach (SurfaceDefinitions surf in possiblesList1) { testFileSurfIds.Add(surf.SurfaceId); }
globalMatchObject.MatchedSurfaceIds.Add(surface.SurfaceId, testFileSurfIds);
ssSummary.FoundMatch = false;
ssSummary.TestSurfaceIDs = testFileSurfIds;
}
}
#endregion
}
}
catch(Exception e){
logger.Fatal(e.ToString());
return;
}
}
