//do testów
public void OpActionDoubleClick(Structs.TestStep testStep1)
{
IWebElement element = ElementFinder(testStep1);
ScrollAndMoveTo(element, testStuff.driver);
new Actions(testStuff.driver).DoubleClick(element).Build().Perform();
}
//odświeża stronę aż znajdzie wiersz, w którym są teksty określone w texts
//w kroku jako xpath należy podać bezpośredniego rodzica wierszy <tr>, zazwyczaj body
//w kroku jako text należy podać stałe teksty odzielone podwójnymi przecinkami albo zmienne obramowane podwójnymi nawiasami kwadratowymi
public string OpActionRefreshUntil(Structs.TestStep testStep1)
{
int duration = Settings.ActionsSettings.opActionRefreshUntilSleep;
int timeout = Settings.ActionsSettings.opActionRefreshUntilTimeout;
DateTime start = DateTime.Now;
TimeSpan whileDuration = new TimeSpan(0, 0, 0);
while (
(!GetIsMatchForRefreshUntil(testStep1.xpath, GetTextsForRefreshUntil(testStep1))) &&
(whileDuration.TotalMilliseconds < timeout))
{
Sleep(duration);
testStuff.driver.Navigate().Refresh();
whileDuration = DateTime.Now - start;
}
if (whileDuration.TotalMilliseconds >= timeout)
{
return("timeout");
}
else
{
return("ok");
}
}
//testować
public string OpActionSetBatchVariable(Structs.TestStep testStep1)
{
if (testStuff.testManager != null)
{
IWebElement element = ElementFinder(testStep1);
Structs.Variable v;
if ((element.Text != null) && (element.Text != ""))
{
v = new Structs.Variable(testStep1.operationText, element.Text);
}
else
{
v = new Structs.Variable(testStep1.operationText, element.GetAttribute("value"));
}
if (testStuff.testManager.batchVariables.Where(t => t.name == v.name).Count() == 0)
{
testStuff.testManager.batchVariables.Add(v);
}
else
{
testStuff.testManager.batchVariables.Remove(testStuff.variables.Where(t => t.name == v.name).FirstOrDefault());
testStuff.testManager.batchVariables.Add(v);
}
return("ok");
}
else
{
return("OpActions.OpActionSetBatchVariable(): test manager is null, are you sure you're running a test batch, not a single test? Using batch variables is allowed only in batch tests.");
}
}
public string OpActionSendBatchVariable(Structs.TestStep testStep1)
{
//dodać sprawdzenia
if (testStuff.testManager != null)
{
IWebElement element = ElementFinder(testStep1);
ScrollAndMoveTo(element, testStuff.driver);
if (testStuff.testManager.batchVariables.Where(t => t.name == testStep1.operationText).Count() > 0)
{
string value = testStuff.testManager.batchVariables.Where(t => t.name == testStep1.operationText).SingleOrDefault().value;
element.SendKeys(value + "\t"); //ważne - z \t chodzi o zejście z pola; użytkownik też dostałby błąd, gdyby nie zszedł z pola z regułą
return("ok");
}
else
{
return("Can't find variable " + testStep1.operationText + ". Possible causes include: " +
"\r\nprevious test in batch failed to set variable" +
"\r\napplication was restarted mid-batch - as for 2019-08-01 batch variables are stored in RAM.");
}
}
else
{
return("OpActions.OpActionSendBatchVariable(): test manager is null, are you sure you're running a test batch, not a single test? Using batch variables is allowed only in batch tests.");
}
}
//tym zastapic szukanie elementow w kazdej op action
private IWebElement ElementFinder(Structs.TestStep testStep1)
{
DateTime start = DateTime.Now;
int timeout = Settings.ActionsSettings.elementFinderTimeout; //ms, do settings
TimeSpan whileDuration = TimeSpan.FromMilliseconds(0);
List <IWebElement> elements = new List <IWebElement>();
while (whileDuration.TotalMilliseconds < timeout)
{
elements = testStuff.driver.FindElements(By.XPath(testStep1.xpath)).ToList();
if (elements.Count > 0)
{
if (DisplayedAndEnabled(elements[0]))
{
//Console.WriteLine("ElementFinder(): proper element found in step" + testStep1.stepDescription);
return(elements[0]);
}
else
{
testStuff.Log("ElementFinder(): element found is disabled or not displayed in step "
+ testStep1.stepDescription + ". Next action: sleep, retry.");
}
}
Sleep(100); //do settings
whileDuration = DateTime.Now - start;
}
//po staremu, na chama, rzeby rzuciło wyjątkami
return(testStuff.driver.FindElement(By.XPath(testStep1.xpath)));
}
public string OpActionClick(Structs.TestStep testStep1)
{
//IWebElement element = testSetup.driver.FindElement(By.XPath(testStep1.xpath));
IWebElement element = ElementFinder(testStep1);
ScrollAndMoveTo(element, testSetup.driver);
element.Click();
//sprawdzenie wystąpienia błędu zdefiniowanego przez uzytkownika (jako fragment html)
if ((Settings.customErrors.Count > 0) && (testStep1.operationText == "Err"))
{
Sleep(Settings.sleepAfterOperation);
string customError = CustomErrorDetected();
if (customError != "no")
{
return("Custom error detected: " + customError);
}
else
{
return("ok");
}
}
else
{
return("ok");
}
}
private List <string> GetTextsForRefreshUntil(Structs.TestStep testStep1)
{
List <string> texts0 = new List <string>();
List <string> texts = new List <string>();
texts0 = Regex.Split(testStep1.operationText, @";").ToList();
foreach (string s in texts0)
{
string s1 = s;
s1 = ClearString(s1);
if (Regex.IsMatch(s1, @"{(.*?)}"))
{
s1 = ClearString(s1);
s1 = s1.Substring(1);
s1 = s1.Substring(0, s1.Length - 1);
texts.Add(testStuff.variables.Where(t => t.name == s1).First().value); //opatrzyć wyjątkiem w razie braku setvariable przed uzyciem variable albo rozbudować walidację data table
}
else
{
texts.Add(s1);
}
}
return(texts);
}
public string OpActionSendEnumKey(Structs.TestStep testStep1)
{
//IWebElement element = testStuff.driver.FindElement(By.XPath(testStep1.operationText));
IWebElement element = ElementFinder(testStep1);
ScrollAndMoveTo(element, testStuff.driver);
switch (testStep1.operationText)
{
case "Escape":
element.SendKeys(OpenQA.Selenium.Keys.Escape);
return("ok");
case "Enter":
element.SendKeys(OpenQA.Selenium.Keys.Enter);
return("ok");
case "Tab":
element.SendKeys(OpenQA.Selenium.Keys.Tab);
return("ok");
case "Backspace":
element.SendKeys(OpenQA.Selenium.Keys.Backspace);
return("ok");
default:
return("SendEnumKey(): Can't recognize key code " + testStep1.operationText);
}
}
public void OpActionSetVariable(Structs.TestStep testStep1)
{
//IWebElement element = testStuff.driver.FindElement(By.XPath(testStep1.xpath));
IWebElement element = ElementFinder(testStep1);
Structs.Variable v;
if ((element.Text != null) && (element.Text != ""))
{
v = new Structs.Variable(testStep1.operationText, element.Text);
}
else
{
v = new Structs.Variable(testStep1.operationText, element.GetAttribute("value"));
}
if (testStuff.variables.Where(t => t.name == v.name).Count() == 0)
{
testStuff.variables.Add(v);
}
else
{
testStuff.variables.Remove(testStuff.variables.Where(t => t.name == v.name).FirstOrDefault());
testStuff.variables.Add(v);
}
}
public void OpActionSendKeys(Structs.TestStep testStep1)
{
//IWebElement element = testStuff.driver.FindElement(By.XPath(testStep1.xpath));
IWebElement element = ElementFinder(testStep1);
ScrollAndMoveTo(element, testStuff.driver);
string text = testStep1.operationText;
if ((text[0] == '{') && (text[text.Length - 1] == '}'))
{
switch (text)
{
case "{DateTimeNow}":
text = DateTime.Now.ToString("yyyy-MM-dd") + "T" + DateTime.Now.ToString("hh-mm-ss");
break;
case "{DateNow}":
text = DateTime.Now.ToString("yyyy-MM-dd");
break;
}
}
element.SendKeys(text + "\t"); //ważne - z \t chodzi o zejście z pola; użytkownik też dostałby błąd, gdyby nie zszedł z pola z regułą
}
public void OpActionMoveToElement(Structs.TestStep testStep1)
{
IWebElement element = ElementFinder(testStep1);
HighlightElement(element); //debug, usunąć
ScrollAndMoveTo(element, testStuff.driver);
}
public void OpActionSendVariable(Structs.TestStep testStep1)
{
IWebElement element = testSetup.driver.FindElement(By.XPath(testStep1.xpath));
ScrollAndMoveTo(element, testSetup.driver);
string value = testSetup.variables.Where(t => t.name == testStep1.operationText).SingleOrDefault().value;
element.SendKeys(value + "\t"); //ważne - z \t chodzi o zejście z pola; użytkownik też dostałby błąd, gdyby nie zszedł z pola z regułą
}
public void OpActionSelectOption(Structs.TestStep testStep1)
{
IWebElement element = testSetup.driver.FindElement(By.XPath(testStep1.xpath));
ScrollAndMoveTo(element, testSetup.driver);
SelectElement option = new SelectElement(element);
int i;
Int32.TryParse(testStep1.operationText, out i);
option.SelectByIndex(i);
element.Click();
}
public void OpActionSendKeys(Structs.TestStep testStep1)
{
IWebElement element = testSetup.driver.FindElement(By.XPath(testStep1.xpath));
//Actions action = new Actions(testSetup.driver); //dla estetyki tylko
//action.MoveToElement(element).Perform();
ScrollAndMoveTo(element, testSetup.driver);
string text = testStep1.operationText;
element.SendKeys(testStep1.operationText + "\t"); //ważne - z \t chodzi o zejście z pola; użytkownik też dostałby błąd, gdyby nie zszedł z pola z regułą
}
public static Structs.TestPlan GetTestPlan(DataTable testPlanTable)
{
Structs.TestStep step;
List <Structs.TestStep> testSteps = new List <Structs.TestStep>();
for (int i = 0; i < testPlanTable.Rows.Count; i++)
{
DataRow row = testPlanTable.Rows[i];
step = new Structs.TestStep((i + 1).ToString() + ") " + row.ItemArray[0].ToString(), row.ItemArray[1].ToString(), row.ItemArray[2].ToString(), row.ItemArray[3].ToString());
testSteps.Add(step);
}
Structs.TestPlan testPlan = new Structs.TestPlan(testSteps);
return(testPlan);
}
public void KeepMaximized(Structs.TestStep testStep1)
{
if ((testStuff.driver.Manage().Window.Size.Width != testStuff.initialWindowSize.Width) ||
(testStuff.driver.Manage().Window.Size.Height != testStuff.initialWindowSize.Height))
{
testStuff.Log("Operation: window size has changed during test step " + testStep1.stepDescription + ". Next action: try to maximize.");
try
{
testStuff.driver.Manage().Window.Maximize();
}
catch (Exception)
{
testStuff.Log("Failed to maximize window.");
}
}
}
//desperacka próba obsłużenia zapisz i zatwierdź, używać w ostateczności, nie obsługuje err
//mam nadziję, że zbędne i do wyeliminowania
public string OpActionClickJS(Structs.TestStep testStep1)
{
Sleep(Settings.ActionsSettings.opActionClickJSInitialSleep);
IJavaScriptExecutor js = (IJavaScriptExecutor)testStuff.driver;
IWebElement element = testStuff.driver.FindElement(By.XPath(testStep1.xpath));
ScrollAndMoveTo(element, testStuff.driver);
//element.Click();
js.ExecuteScript("arguments[0].click();", element);
Sleep(Settings.ActionsSettings.opActionClickJSFinalSleep);
return("ok");
}
public string OpActionClick(Structs.TestStep testStep1)
{
if (testStep1.operationText.Contains("Retarded"))
{
Sleep(Settings.ActionsSettings.opActionClickRetarded);
}
BrowserFocus();
//dodane ze względu na problemy - czasem nie klika i nie zgłasza błędu
testStuff.Log("OpActions.OpActionClick() called in test step " + testStep1.stepDescription);
//IWebElement element = testStuff.driver.FindElement(By.XPath(testStep1.xpath));
IWebElement element = ElementFinder(testStep1);
ScrollAndMoveTo(element, testStuff.driver);
element.Click();
//sprawdzenie wystąpienia błędu zdefiniowanego przez uzytkownika (jako fragment html)
if ((Settings.customErrors.Count > 0) && (testStep1.operationText.Contains("Err")))
{
Sleep(Settings.sleepAfterOperation);
string customError = CustomErrorDetected();
if (customError != "no")
{
return("Custom error detected: " + customError);
}
else
{
return("ok");
}
}
else
{
return("ok");
}
}
public string OpActionPresetVariable(Structs.TestStep testStep1)
{
string text = testStep1.operationText;
string name = "";
string value = "";
try
{
name = text.Substring(0, text.IndexOf('='));
value = text.Substring(text.IndexOf('=') + 1);
name = ClearString(name);
value = ClearString(value);
//jeżeli wartość ma być pobrana ze zmiennej batcha, np. text: x={y}
if (value[0] == '{' && value[value.Length - 1] == '}')
{
value = testStuff.testManager.batchVariables.Where(t => t.name == value.Substring(1, value.Length - 2)).FirstOrDefault().value;
}
}
catch (Exception e)
{
return("OpActionPresetVariable(): can't parse \"" + text + "\". Exception:\r\n" + e);
}
Structs.Variable v = new Structs.Variable(name, value);
if (testStuff.variables.Where(t => t.name == v.name).Count() == 0)
{
testStuff.variables.Add(v);
}
else
{
testStuff.variables.Remove(testStuff.variables.Where(t => t.name == v.name).FirstOrDefault());
testStuff.variables.Add(v);
}
return("ok");
}
public void OpActionSelectOption(Structs.TestStep testStep1)
{
//IWebElement element = testStuff.driver.FindElement(By.XPath(testStep1.xpath));
IWebElement element = ElementFinder(testStep1);
ScrollAndMoveTo(element, testStuff.driver);
SelectElement option = new SelectElement(element);
//int i = -1;
if (Int32.TryParse(testStep1.operationText, out int i))
{
option.SelectByIndex(i);
}
else
{
option.SelectByText(testStep1.operationText);
}
element.Click();
}
public static Structs.TestPlan GetTestPlan(DataTable testPlanTable)
{
Structs.TestStep step;
List <Structs.TestStep> testSteps = new List <Structs.TestStep>();
for (int i = 0; i < testPlanTable.Rows.Count; i++)
{
DataRow row = testPlanTable.Rows[i];
//pominięcie komentarzy
if ((row[0].ToString()[0] == '[') && (row[0].ToString()[row[0].ToString().Length - 1] == ']'))
{
Console.WriteLine("TestPlanFromDataTable.GetTestPlan(): removed comment \"" + row[0].ToString() + "\"");
continue;
}
step = new Structs.TestStep("(" + (i + 1).ToString() + ") " + row.ItemArray[0].ToString(), row.ItemArray[1].ToString(), row.ItemArray[2].ToString(), row.ItemArray[3].ToString());
testSteps.Add(step);
}
Structs.TestPlan testPlan = new Structs.TestPlan(testSteps);
return(testPlan);
}
//działania ostatniej szansy, kiedy test się zatnie na NonInteractibleException
public void TryHelpNonInteractible(Structs.TestStep testStep, int catchCount)
{
switch (catchCount) //do zmiany!!! w tym catch mógł się trafić inny błąd //taki switch powinien być w operations?
{
case 3:
//rekurencyjnie szuka interaktywnego (visible, enabled) rodzica i kiedy znajdzie, jedzie do niego
MoveToParent();
break;
}
void MoveToParent()
{
string log = "TryHelpNonInteractible().MoveToParent(): I will try to find an interactible parent.";
string initialXPath = testStep.xpath;
string goodXPath = MoveUpAndTry(initialXPath);
string MoveUpAndTry(string xpath)
{
log += "\r\nMoveUpAndTry() called for xpath " + xpath;
string parentXPath = xpath.Substring(0, xpath.LastIndexOf('/'));
List <IWebElement> parents;
if (parentXPath.Count(t => t == '/') > 1)
{
parents = testStuff.driver.FindElements(By.XPath(parentXPath)).ToList();
}
else
{
return("not xpath");
}
if (parents.Count > 0)
{
if (parents[0].Displayed && parents[0].Enabled)
{
return(parentXPath);
}
else
{
return(MoveUpAndTry(parentXPath));
}
}
else
{
return("parents count 0");
}
}
if (goodXPath.Count(t => t == '/') > 1)
{
log += "\r\nInteractible parent found, calling ScrollAndMoveTo, xpath found: " + goodXPath;
IWebElement parent = testStuff.driver.FindElement(By.XPath(goodXPath));
ScrollAndMoveTo(parent, testStuff.driver);
//HighlightElement(parent);
}
else
{
log += "\r\nSearch for interactible parent failed.";
}
testStuff.Log(log);
}
}
private string PerformOperation(Structs.TestStep testStep1)
{
string result = "init";
switch (testStep1.operationName)
{
case "SendKeys":
opActions.OpActionSendKeys(testStep1);
result = "ok";
break;
case "SendEnumKey":
result = opActions.OpActionSendEnumKey(testStep1);;
break;
case "GoToUrl":
opActions.OpActionGoToUrl(testStep1);
result = "ok";
break;
case "Click":
result = opActions.OpActionClick(testStep1);
break;
case "ClickJS":
result = opActions.OpActionClickJS(testStep1);
break;
case "WaitFor":
result = opActions.OpActionWaitFor(testStep1);
break;
case "Refresh":
opActions.OpActionRefresh();
result = "ok";
break;
case "MoveToElement":
opActions.OpActionMoveToElement(testStep1);
result = "ok";
break;
case "SetVariable":
opActions.OpActionSetVariable(testStep1);
result = "ok";
break;
case "SendVariable":
opActions.OpActionSendVariable(testStep1);
result = "ok";
break;
case "CloseAlert":
opActions.OpActionCloseAlert(testStep1.operationText);
result = "ok";
break;
case "SendEnumKeyToAlert":
result = opActions.OpActionSendEnumKeyToAlert(testStep1.operationText);
break;
case "SelectOption":
opActions.OpActionSelectOption(testStep1);
result = "ok";
break;
case "RefreshUntil":
result = opActions.OpActionRefreshUntil(testStep1);
break;
case "Scroll":
result = opActions.OpActionScroll(testStep1);
break;
default:
result = "Error: can't recognize operation \"" + testStep1.operationName + "\".";
break;
}
return(result);
}
private string PerformOperation(Structs.TestStep testStep1)
{
string result = "init";
//klucz operationName wzorowany na słowniku komend Selenium (jak w plikach .side)
switch (testStep1.operationName)
{
case "type": //dawne "SendKeys":
opActions.OpActionSendKeys(testStep1);
result = "ok";
break;
case "sendKeys": //"SendEnumKey":
result = opActions.OpActionSendEnumKey(testStep1);;
break;
case "goToUrl":
opActions.OpActionGoToUrl(testStep1);
result = "ok";
break;
case "click":
result = opActions.OpActionClick(testStep1);
break;
case "clickJS":
result = opActions.OpActionClickJS(testStep1);
break;
case "clickLast":
result = opActions.OpActionClickLast();
break;
case "doubleClick":
opActions.OpActionDoubleClick(testStep1);
result = "ok";
break;
case "doubleClickLast":
result = opActions.OpActionDoubleClickLast();
break;
case "waitFor":
result = opActions.OpActionWaitFor(testStep1);
break;
case "refresh":
opActions.OpActionRefresh();
result = "ok";
break;
case "mouseOver": //"moveToElement":
opActions.OpActionMoveToElement(testStep1);
result = "ok";
break;
case "setVariable":
opActions.OpActionSetVariable(testStep1);
result = "ok";
break;
case "sendVariable":
opActions.OpActionSendVariable(testStep1);
result = "ok";
break;
case "setBatchVariable":
result = opActions.OpActionSetBatchVariable(testStep1);
break;
case "sendBatchVariable":
result = opActions.OpActionSendBatchVariable(testStep1);
break;
case "closeAlert":
opActions.OpActionCloseAlert(testStep1.operationText);
result = "ok";
break;
case "sendEnumKeyToAlert":
result = opActions.OpActionSendEnumKeyToAlert(testStep1.operationText);
break;
case "select": //"SelectOption":
opActions.OpActionSelectOption(testStep1);
result = "ok";
break;
case "refreshUntil":
result = opActions.OpActionRefreshUntil(testStep1);
break;
case "scroll":
result = opActions.OpActionScroll(testStep1);
break;
case "presetVariable":
result = opActions.OpActionPresetVariable(testStep1);
break;
default:
result = "Error: can't recognize operation \"" + testStep1.operationName + "\".";
break;
}
return(result);
}
public void OpActionMoveToElement(Structs.TestStep testStep1)
{
IWebElement element = testSetup.driver.FindElement(By.XPath(testStep1.xpath));
ScrollAndMoveTo(element, testSetup.driver);
}
int catchLimit = Settings.catchLimit; //do settingsów
public string Operation(Structs.TestStep testStep1)
{
string result = "init";
try
{
opActions.KeepMaximized(testStep1); //wielkość okna chrome, ważne dla niezawodności opetarions
result = PerformOperation(testStep1);
opActions.Sleep(Settings.sleepAfterOperation);
catchCount = 0;
}
catch (NoAlertPresentException)
{
catchCount++;
testStuff.Log("Exception caught \"NoAlertPresentException\" in step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next: sleep, retry.");
opActions.Sleep(200);
if (catchCount < catchLimit)
{
result = Operation(testStep1);
}
else
{
//result = "Catch limit exceeded: \"UnhandledAlertException\" in step " + testStep1.stepDescription + ".";
result = "ok"; //dziwne, ale chodzi o to, że kiedy leci taki wyjątek, to praktycznie zawsze przy próbie pozbycia się jebanego alertu; więc tu zakładany, że jebańca nie ma
}
}
catch (UnhandledAlertException)
{
catchCount++;
testStuff.Log("Exception caught \"UnhandledAlertException\" in step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next: close alert, retry.");
opActions.OpActionCloseAlert("Accept");
if (catchCount < catchLimit)
{
result = Operation(testStep1);
}
else
{
result = "Catch limit exceeded: \"UnhandledAlertException\" in step " + testStep1.stepDescription + ".";
}
}
catch (StaleElementReferenceException)
{
catchCount++;
testStuff.Log("Exception caught \"StaleElementReferenceException\" in step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next: retry.");
if (catchCount < catchLimit)
{
result = Operation(testStep1);
}
else
{
result = "Catch limit exceeded: \"StaleElementReferenceException\" in step " + testStep1.stepDescription + ".";
}
}
catch (ElementNotInteractableException)
{
catchCount++;
testStuff.Log("Exception caught \"ElementNotInteractableException\" in step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next: sleep, retry.");
opActions.Sleep(Settings.sleepAfterElementNotInteractible);
if (catchCount < catchLimit)
{
if (Settings.allowTryHelps)
{
opActions.TryHelpNonInteractible(testStep1, catchCount); //znajduje interaktywnego rodzica i najeżdża na niego kursorem
}
result = Operation(testStep1);
}
else
{
result = "Catch limit exceeded. \"ElementNotInteractableException\" in step " + testStep1.stepDescription + ".";
}
}
//niby redundantne z implicit wait, ale w praktyce pomaga
catch (NoSuchElementException e)
{
catchCount += 1;
testStuff.Log("Exception caught \"NoSuchElementException\" in test step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next actions: sleep, retry.");
opActions.Sleep(Settings.sleepAfterNoSuchElement); //do tego dochodzi implicit wait, więc łącznie 40,3 s x 10... wtf
if (catchCount < Settings.noSuchElementCatchLimit)
{
if (Settings.allowTryHelps)
{
opActions.TryHelpNoSuchElement(catchCount); //scrolluje
}
result = Operation(testStep1);
}
else
{
result = "Catch limit exceeded. \"NoSuchElementException\" in test step " + testStep1.stepDescription + ". Is test scenario up-to-date? Exception: \r\n" + e;
}
}
catch (Exception e)
{
result = "Error in step named: \"" + testStep1.stepDescription + "\". Operation: \"" + testStep1.operationName + "\". Exception: \r\n" + e;
}
return(result);
}
int catchLimit = Settings.catchLimit; //do settingsów
public string Operation(Structs.TestStep testStep1)
{
string result = "init";
try
{
opActions.KeepMaximized(testStep1); //wielkość okna chrome, ważne dla niezawodności opetarions
result = PerformOperation(testStep1);
opActions.Sleep(Settings.sleepAfterOperation);
catchCount = 0;
}
catch (NoAlertPresentException)
{
catchCount++;
testSetup.Log("Exception caught \"NoAlertPresentException\" in test step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next actions: none.");
}
catch (UnhandledAlertException)
{
catchCount++;
testSetup.Log("Exception caught \"UnhandledAlertException\" in test step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next actions: close alert, retry.");
opActions.OpActionCloseAlert("Accept");
if (catchCount < catchLimit)
{
result = Operation(testStep1);
}
else
{
result = "Catch limit exceeded: \"UnhandledAlertException\" in test step " + testStep1.stepDescription + ".";
}
}
catch (StaleElementReferenceException)
{
catchCount++;
testSetup.Log("Exception caught \"StaleElementReferenceException\" in test step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next action: retry.");
if (catchCount < catchLimit)
{
result = Operation(testStep1);
}
else
{
result = "Catch limit exceeded: \"StaleElementReferenceException\" in test step " + testStep1.stepDescription + ".";
}
}
catch (ElementNotInteractableException)
{
catchCount++;
testSetup.Log("Exception caught \"ElementNotInteractableException\" in test step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next actions: sleep, retry.");
opActions.Sleep(Settings.sleepAfterElementNotInteractible);
if (catchCount < catchLimit)
{
result = Operation(testStep1);
}
else
{
result = "Catch limit exceeded. \"ElementNotInteractableException\" in test step " + testStep1.stepDescription + ".";
}
}
//niby redundantne z implicit wait, ale w praktyce pomaga
catch (NoSuchElementException e)
{
catchCount += 9; //ze względu na implicit wait (jakoś to ogarnąć potem)
testSetup.Log("Exception caught \"NoSuchElementException\" in test step " + testStep1.stepDescription + ". Catch number " + catchCount.ToString() + ". Next actions: sleep, retry.");
//bez refresh!
opActions.Sleep(Settings.sleepAfterNoSuchElement); //do tego dochodzi implicit wait, więc łącznie 40,3 s x 10... wtf
if (catchCount < catchLimit)
{
result = Operation(testStep1);
}
else
{
result = "Catch limit exceeded. \"NoSuchElementException\" in test step " + testStep1.stepDescription + ". Exception: \r\n" + e;
}
}
catch (Exception e)
{
result = "Error in step named: \"" + testStep1.stepDescription + "\". Operation: \"" + testStep1.operationName + "\". Exception: \r\n" + e;
}
return(result);
}
//służy do
//1. weryfikacji, że test dotarł do oczekiwanego elementu (ewentualnie z tekstem)
//2. oczekiwania sztywno przez x s - np. po zapisz i zatwierdź
//3. oczekiwania aż pojawi się element (ew. tekst)
public string OpActionWaitFor(Structs.TestStep testStep1)
{
int timeOut = Settings.ActionsSettings.opActionWaitForTimeout;
TimeSpan whileDuration = new TimeSpan(0, 0, 0);
DateTime startTime = DateTime.Now;
string expectedText = "";
if ((testStep1.operationText != null) && (testStep1.operationText != ""))
{
expectedText = testStep1.operationText;
expectedText = ClearString(expectedText);
}
List <IWebElement> elements = new List <IWebElement>();
while (whileDuration.TotalMilliseconds < timeOut)
{
if ((testStep1.xpath != null) && (testStep1.xpath != ""))
{
elements = testStuff.driver.FindElements(By.XPath(testStep1.xpath)).ToList();
if (elements.Count > 0)
{
//dodac warunek, ze visible, interactible itp
//uładzic te funkcje
if (expectedText != "")
{
if (elements[0].Text.Contains(expectedText))
{
if (DisplayedAndEnabled(elements[0]))
{
return("ok");
}
else
{
return("OpActionWaitFor(): element found is disabled or not displayed.");
}
}
else
{
elements.Clear();
}
}
else
{
if (DisplayedAndEnabled(elements[0]))
{
return("ok");
}
else
{
return("OpActionWaitFor(): element found is disabled or not displayed.");
}
}
}
}
Sleep(Settings.ActionsSettings.opActionWaitForSleep);
whileDuration = DateTime.Now - startTime;
}
if ((testStep1.xpath != null) && (testStep1.xpath != ""))
{
return("Wait for (expected text: \"" + expectedText + "\") timed out");
}
else
{
return("ok");
}
}
public void OpActionGoToUrl(Structs.TestStep testStep1)
{
testStuff.driver.Navigate().GoToUrl(testStep1.operationText);
}
public string OpActionScroll(Structs.TestStep testStep1)
{
Sleep(Settings.ActionsSettings.opActionScrollSleep);
IJavaScriptExecutor js = (IJavaScriptExecutor)testStuff.driver;
string destination = testStep1.operationText;
Tuple <int, int> vector = new Tuple <int, int>(0, 0);
bool gotVector = false;
if (destination.Contains("{"))
{
gotVector = TryGetVector2(destination, out vector);
}
switch (destination)
{
case "Top":
js.ExecuteScript("window.scrollTo(0, 0);");
return("ok");
case "Bottom":
js.ExecuteScript("window.scrollTo(0, document.body.scrollHeight);");
return("ok");
default:
if (gotVector)
{
js.ExecuteScript("window.scrollTo(" + vector.Item1.ToString() + ", " + vector.Item2.ToString() + ")");
return("ok");
}
else
{
return("Error: can't recognize scroll destination \"" + destination + "\"; use \"Top\" or \"Bottom\" or {dx;dy}");
}
}
bool TryGetVector2(string input, out Tuple <int, int> tuple)
{
string input1 = input.Replace("{", "").Replace("}", "");
string[] texts = input1.Split(';');
tuple = new Tuple <int, int>(0, 0);
if (texts.Length != 2)
{
return(false);
}
int x;
int y;
for (int i = 0; i < texts.Length; i++)
{
texts[i] = ClearString(texts[i]);
}
if (!Int32.TryParse(texts[0], out x) || !Int32.TryParse(texts[1], out y))
{
return(false);
}
tuple = new Tuple <int, int>(x, y);
return(true);
}
}