private static void ReadSplineMovement422(ref Packet packet, Vector3 pos)
{
var flags = packet.ReadEnum<SplineFlag422>("Spline Flags", TypeCode.Int32);
if (flags.HasAnyFlag(SplineFlag422.AnimationTier))
{
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag422.Trajectory))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Unk Int32 2");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag422.UsePathSmoothing))
{
for (var i = 0; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
var mid = new Vector3();
mid.X = (pos.X + newpos.X) * 0.5f;
mid.Y = (pos.Y + newpos.Y) * 0.5f;
mid.Z = (pos.Z + newpos.Z) * 0.5f;
for (var i = 1; i < waypoints; i++)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.WriteLine("[" + i + "]" + " Waypoint: " + vec);
}
}
}
private static void ReadSplineMovement510(Packet packet, Vector3 pos)
{
var flags = packet.ReadInt32E<SplineFlag434>("Spline Flags");
if (flags.HasAnyFlag(SplineFlag434.Animation))
{
packet.ReadByteE<MovementAnimationState>("Animation State");
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag434.Parabolic))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Async-time in ms");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag434.UncompressedPath))
{
for (var i = 0; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
var mid = new Vector3
{
X = (pos.X + newpos.X)*0.5f,
Y = (pos.Y + newpos.Y)*0.5f,
Z = (pos.Z + newpos.Z)*0.5f
};
if (waypoints != 1)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.AddValue("Waypoint: ", vec, 0);
if (waypoints > 2)
{
for (var i = 1; i < waypoints - 1; ++i)
{
vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.AddValue("Waypoint", vec, i);
}
}
}
}
var unkLoopCounter = packet.ReadUInt16("Unk UInt16");
if (unkLoopCounter > 1)
{
packet.ReadSingle("Unk Float 1");
packet.ReadUInt16("Unk UInt16 1");
packet.ReadUInt16("Unk UInt16 2");
packet.ReadSingle("Unk Float 2");
packet.ReadUInt16("Unk UInt16 3");
for (var i = 0; i < unkLoopCounter; i++)
{
packet.ReadUInt16("Unk UInt16 1", i);
packet.ReadUInt16("Unk UInt16 2", i);
}
}
}
public static void HandleMonsterMove(Packet packet)
{
var guid = packet.ReadPackedGuid("GUID");
if (Storage.Objects != null && Storage.Objects.ContainsKey(guid))
{
var obj = Storage.Objects[guid].Item1;
UpdateField uf;
if (obj.UpdateFields != null && obj.UpdateFields.TryGetValue(UpdateFields.GetUpdateField(UnitField.UNIT_FIELD_FLAGS), out uf))
if ((uf.UInt32Value & (uint)UnitFlags.IsInCombat) == 0) // movement could be because of aggro so ignore that
obj.Movement.HasWpsOrRandMov = true;
}
if (packet.Opcode == Opcodes.GetOpcode(Opcode.SMSG_MONSTER_MOVE_TRANSPORT))
{
packet.ReadPackedGuid("Transport GUID");
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadByte("Transport Seat");
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadBoolean("Toggle AnimTierInTrans");
var pos = packet.ReadVector3("Position");
packet.ReadInt32("Move Ticks");
var type = packet.ReadEnum<SplineType>("Spline Type", TypeCode.Byte);
switch (type)
{
case SplineType.FacingSpot:
{
packet.ReadVector3("Facing Spot");
break;
}
case SplineType.FacingTarget:
{
packet.ReadGuid("Facing GUID");
break;
}
case SplineType.FacingAngle:
{
packet.ReadSingle("Facing Angle");
break;
}
case SplineType.Stop:
return;
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V4_3_4_15595))
{
// Not the best way
ReadSplineMovement434(ref packet, pos);
return;
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V4_2_2_14545))
{
// Not the best way
ReadSplineMovement422(ref packet, pos);
return;
}
var flags = packet.ReadEnum<SplineFlag>("Spline Flags", TypeCode.Int32);
if (flags.HasAnyFlag(SplineFlag.AnimationTier))
{
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
packet.ReadInt32("Async-time in ms");
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag.Trajectory))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Async-time in ms");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag.Flying | SplineFlag.CatmullRom))
{
for (var i = 0; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
var mid = new Vector3();
mid.X = (pos.X + newpos.X) * 0.5f;
mid.Y = (pos.Y + newpos.Y) * 0.5f;
mid.Z = (pos.Z + newpos.Z) * 0.5f;
for (var i = 1; i < waypoints; i++)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.WriteLine("[" + i + "]" + " Waypoint: " + vec);
}
}
}
public static void HandleMonsterMove(Packet packet)
{
WowGuid guid = packet.ReadPackedGuid("GUID");
if (Storage.Objects != null && Storage.Objects.ContainsKey(guid))
{
WoWObject obj = Storage.Objects[guid].Item1;
UpdateField uf;
if (obj.UpdateFields != null && obj.UpdateFields.TryGetValue(UpdateFields.GetUpdateField(UnitField.UNIT_FIELD_FLAGS), out uf))
if ((uf.UInt32Value & (uint)UnitFlags.IsInCombat) == 0) // movement could be because of aggro so ignore that
obj.Movement.HasWpsOrRandMov = true;
}
if (packet.Opcode == Opcodes.GetOpcode(Opcode.SMSG_MONSTER_MOVE_TRANSPORT, Direction.ServerToClient))
{
WowGuid transportGuid = packet.ReadPackedGuid("Transport GUID");
int seat = -1;
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
seat = packet.ReadByte("Transport Seat");
if (transportGuid.HasEntry() && transportGuid.GetHighType() == HighGuidType.Vehicle &&
guid.HasEntry() && guid.GetHighType() == HighGuidType.Creature)
{
VehicleTemplateAccessory vehicleAccessory = new VehicleTemplateAccessory
{
Entry = transportGuid.GetEntry(),
AccessoryEntry = guid.GetEntry(),
SeatId = seat
};
Storage.VehicleTemplateAccessorys.Add(vehicleAccessory, packet.TimeSpan);
}
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadBool("Toggle AnimTierInTrans");
var pos = packet.ReadVector3("Position");
packet.ReadInt32("Move Ticks");
var type = packet.ReadByteE<SplineType>("Spline Type");
switch (type)
{
case SplineType.FacingSpot:
{
packet.ReadVector3("Facing Spot");
break;
}
case SplineType.FacingTarget:
{
packet.ReadGuid("Facing GUID");
break;
}
case SplineType.FacingAngle:
{
packet.ReadSingle("Facing Angle");
break;
}
case SplineType.Stop:
return;
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V5_1_0_16309))
{
// Not the best way
ReadSplineMovement510(packet, pos);
return;
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V4_2_2_14545))
{
// Not the best way
ReadSplineMovement422(packet, pos);
return;
}
var flags = packet.ReadInt32E<SplineFlag>("Spline Flags");
if (flags.HasAnyFlag(SplineFlag.AnimationTier))
{
packet.ReadByteE<MovementAnimationState>("Animation State");
packet.ReadInt32("Async-time in ms");
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag.Trajectory))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Async-time in ms");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag.Flying | SplineFlag.CatmullRom))
{
for (var i = 0; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
Vector3 mid = (pos + newpos) * 0.5f;
for (var i = 1; i < waypoints; i++)
{
var vec = packet.ReadPackedVector3();
vec = mid - vec;
packet.AddValue("Waypoint", vec, i);
}
}
}
private static void ReadSplineMovement422(Packet packet, Vector3 pos)
{
var flags = packet.ReadInt32E<SplineFlag422>("Spline Flags");
if (flags.HasAnyFlag(SplineFlag422.AnimationTier))
{
packet.ReadByteE<MovementAnimationState>("Animation State");
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag422.Trajectory))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Unk Int32 2");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag422.UsePathSmoothing))
{
for (var i = 0; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
var mid = new Vector3
{
X = (pos.X + newpos.X)*0.5f,
Y = (pos.Y + newpos.Y)*0.5f,
Z = (pos.Z + newpos.Z)*0.5f
};
for (var i = 1; i < waypoints; i++)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.AddValue("Waypoint", vec);
}
}
}
public static void HandleMonsterMove(Packet packet)
{
Guid mover = packet.ReadPackedGuid("GUID");
if (packet.Opcode == Opcodes.GetOpcode(Opcode.SMSG_MONSTER_MOVE_TRANSPORT))
{
packet.ReadPackedGuid("Transport GUID");
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadByte("Transport Seat");
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadBoolean("Toggle AlwaysAllowPitching");
var pos = packet.ReadVector3("Position");
packet.ReadInt32("Move Ticks");
var type = packet.ReadEnum<SplineType>("Spline Type", TypeCode.Byte);
switch (type)
{
case SplineType.FacingSpot:
{
packet.ReadVector3("Facing Spot");
break;
}
case SplineType.FacingTarget:
{
packet.ReadGuid("Facing GUID");
break;
}
case SplineType.FacingAngle:
{
packet.ReadSingle("Facing Angle");
break;
}
case SplineType.Stop:
return;
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V4_2_2_14545))
{
// Not the best way
ReadSplineMovement422(ref packet, pos);
return;
}
var flags = packet.ReadEnum<SplineFlag>("Spline Flags", TypeCode.Int32);
if (flags.HasAnyFlag(SplineFlag.AnimationTier))
{
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
}
if (flags.HasAnyFlag(SplineFlag.Falling)) // Could be SplineFlag.UsePathSmoothing
{
packet.ReadInt32("Unknown");
packet.ReadInt16("Unknown");
packet.ReadInt16("Unknown");
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag.Trajectory))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Unk Int32 2");
}
var waypoints = packet.ReadInt32("Waypoints");
var waypointsList = new List<string>();
if (flags.HasAnyFlag(SplineFlag.Flying | SplineFlag.CatmullRom))
{
for (var i = 0; i < waypoints; i++)
waypointsList.Add(packet.ReadVector3("[" + i + "] Waypoint - Flying Or CatmullRom", i).ToString());
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
waypointsList.Add("New position: " + newpos.ToString());
var mid = new Vector3();
mid.X = (pos.X + newpos.X) * 0.5f;
mid.Y = (pos.Y + newpos.Y) * 0.5f;
mid.Z = (pos.Z + newpos.Z) * 0.5f;
for (var i = 1; i < waypoints; i++)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
string output = "[" + i + "]" + " Waypoint: " + vec;
packet.Writer.WriteLine(output);
waypointsList.Add(output);
}
}
// Is this check really needed?
if (mover.HasEntry() && mover.GetObjectType() == ObjectType.Unit)
{
MovementPacket movPacket = new MovementPacket(packet.Number, packet.Time, waypointsList);
if (packet.SniffFileInfo.Stuffing.Waypoints.ContainsKey(mover))
packet.SniffFileInfo.Stuffing.Waypoints[mover].movementPackets.Enqueue(movPacket);
else
packet.SniffFileInfo.Stuffing.Waypoints.TryAdd(mover, new MovementPackets(movPacket));
}
}
public static void HandleMonsterMove(Packet packet)
{
packet.ReadPackedGuid("GUID");
if (packet.Opcode == Opcodes.GetOpcode(Opcode.SMSG_MONSTER_MOVE_TRANSPORT))
{
packet.ReadPackedGuid("Transport GUID");
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadByte("Transport Seat");
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadBoolean("Unk Boolean"); // Something to do with IsVehicleExitVoluntary ?
var pos = packet.ReadVector3("Position");
packet.ReadInt32("Move Ticks");
var type = packet.ReadEnum<SplineType>("Spline Type", TypeCode.Byte);
switch (type)
{
case SplineType.FacingSpot:
{
packet.ReadVector3("Facing Spot");
break;
}
case SplineType.FacingTarget:
{
packet.ReadGuid("Facing GUID");
break;
}
case SplineType.FacingAngle:
{
packet.ReadSingle("Facing Angle");
break;
}
case SplineType.Stop:
return;
}
var flags = packet.ReadEnum<SplineFlag>("Spline Flags", TypeCode.Int32);
if (flags.HasAnyFlag(SplineFlag.AnimationTier))
{
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
}
// Cannot find anything similar to this in 4.2.2 client
if (ClientVersion.RemovedInVersion(ClientVersionBuild.V4_2_2_14545))
{
if (flags.HasAnyFlag(SplineFlag.Falling)) // Could be SplineFlag.UsePathSmoothing
{
packet.ReadInt32("Unknown");
packet.ReadInt16("Unknown");
packet.ReadInt16("Unknown");
}
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag.Trajectory))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Unk Int32 2");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag.Flying | SplineFlag.CatmullRom))
{
packet.ReadVector3("Waypoint", 0);
for (var i = 1; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
var mid = new Vector3();
mid.X = (pos.X + newpos.X) * 0.5f;
mid.Y = (pos.Y + newpos.Y) * 0.5f;
mid.Z = (pos.Z + newpos.Z) * 0.5f;
for (var i = 1; i < waypoints; i++)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.Writer.WriteLine("[" + i + "]" + " Waypoint: " + vec);
}
}
}
public static void HandleMonsterMove(Packet packet)
{
var ownerGUID = new byte[8];
var guid2 = new byte[8];
var factingTargetGUID = new byte[8];
var pos = new Vector3();
var bitB0 = packet.ReadBit();
ownerGUID[5] = packet.ReadBit();
var hasAnimationTime = !packet.ReadBit();
var hasTime = !packet.ReadBit();
packet.StartBitStream(ownerGUID, 4, 3);
var bit4C = !packet.ReadBit();
var bit78 = packet.ReadBit();
ownerGUID[2] = packet.ReadBit();
var hasFlags = !packet.ReadBit();
ownerGUID[0] = packet.ReadBit();
var bits8C = 0u;
if (bitB0)
{
packet.ReadBits("bits9C", 2);
bits8C = packet.ReadBits(22);
}
var waypointCount = packet.ReadBits(22);
var bit6D = !packet.ReadBit();
ownerGUID[7] = packet.ReadBit();
packet.ReadBit(); // fake bit
packet.StartBitStream(guid2, 5, 3, 4, 6, 2, 1, 7, 0);
var hasAnimationState = !packet.ReadBit();
var hasParabolicTime = !packet.ReadBit();
var hasParabolicSpeed = !packet.ReadBit();
ownerGUID[6] = packet.ReadBit();
var splineCount = packet.ReadBits(20);
ownerGUID[1] = packet.ReadBit();
var bit6C = !packet.ReadBit();
var splineType = packet.ReadBits(3);
if (splineType == 3)
packet.StartBitStream(factingTargetGUID, 4, 6, 5, 1, 0, 7, 3, 2);
packet.ReadBit("bit38");
packet.ResetBitReader();
if (bitB0)
{
packet.ReadSingle("floatA8");
packet.ReadSingle("floatA0");
packet.ReadInt16("shortAC");
for (var i = 0; i < bits8C; ++i)
{
packet.ReadInt16("short94+2", i);
packet.ReadInt16("short94+0", i);
}
packet.ReadInt16("shortA4");
}
packet.ReadXORBytes(guid2, 0, 1, 2, 7, 3, 4, 6, 5);
if (splineType == 3)
{
packet.ParseBitStream(factingTargetGUID, 2, 1, 7, 0, 5, 3, 4, 6);
packet.WriteGuid("Facting Target GUID", factingTargetGUID);
}
pos.Y = packet.ReadSingle();
packet.ReadXORByte(ownerGUID, 7);
if (hasAnimationTime)
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
var waypoints = new Vector3[waypointCount];
for (var i = 0; i < waypointCount; ++i)
{
var vec = packet.ReadPackedVector3();
waypoints[i].X = vec.X;
waypoints[i].Y = vec.Y;
waypoints[i].Z = vec.Z;
}
packet.ReadSingle("Float2C");
pos.Z = packet.ReadSingle();
packet.ReadSingle("Float30");
if (splineType == 2)
{
var spot = new Vector3
{
Y = packet.ReadSingle(),
Z = packet.ReadSingle(),
X = packet.ReadSingle(),
};
packet.AddValue("Facing Spot", spot);
}
Vector3 endpos = new Vector3();
for (var i = 0; i < splineCount; ++i)
{
var spot = new Vector3
{
Y = packet.ReadSingle(),
Z = packet.ReadSingle(),
X = packet.ReadSingle(),
};
// client always taking first point
if (i == 0)
{
endpos = spot;
}
packet.AddValue("Spline Waypoint", spot, i);
}
packet.ReadXORByte(ownerGUID, 5);
packet.ReadInt32("Move Ticks");
if (hasFlags)
packet.ReadEnum<SplineFlag434>("Spline Flags", TypeCode.Int32);
if (hasAnimationState)
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
packet.ReadXORByte(ownerGUID, 0);
if (bit6D)
packet.ReadByte("byte6D");
if (hasParabolicTime)
packet.ReadInt32("Async-time in ms");
pos.X = packet.ReadSingle();
if (hasTime)
packet.ReadInt32("Move Time in ms");
packet.ReadXORByte(ownerGUID, 4);
if (hasParabolicSpeed)
packet.ReadSingle("Vertical Speed");
if (!bit78)
packet.ReadByte("byte78");
if (splineType == 4)
packet.ReadSingle("Facing Angle");
if (bit6C)
packet.ReadByte("byte6C");
packet.ReadSingle("Float34");
if (bit4C)
packet.ReadInt32("int4C");
packet.ReadXORBytes(ownerGUID, 6, 2, 3, 1);
// Calculate mid pos
var mid = new Vector3();
mid.X = (pos.X + endpos.X) * 0.5f;
mid.Y = (pos.Y + endpos.Y) * 0.5f;
mid.Z = (pos.Z + endpos.Z) * 0.5f;
for (var i = 0; i < waypointCount; ++i)
{
var vec = new Vector3
{
X = mid.X - waypoints[i].X,
Y = mid.Y - waypoints[i].Y,
Z = mid.Z - waypoints[i].Z,
};
packet.AddValue("Waypoint", vec, i);
}
packet.WriteGuid("Owner GUID", ownerGUID);
packet.WriteGuid("GUID2", guid2);
packet.AddValue("Position", pos);
}
public static void HandleMonsterMove(Packet packet)
{
var pos = new Vector3();
var guid2 = new byte[8];
var factingTargetGUID = new byte[8];
var ownerGUID = new byte[8];
pos.Z = packet.ReadSingle(); // +6
pos.X = packet.ReadSingle(); // +4
packet.ReadInt32("Move Ticks"); // +10
pos.Y = packet.ReadSingle(); // +5
packet.ReadSingle("Float12"); // +12
packet.ReadSingle("Float13"); // +13
packet.ReadSingle("Float11"); // +11
var bit21 = !packet.ReadBit(); // +21
ownerGUID[0] = packet.ReadBit(); // +32 - 0
var splineType = (int)packet.ReadBits(3); // +68
if (splineType == 3)
packet.StartBitStream(factingTargetGUID, 6, 4, 3, 0, 5, 7, 1, 2);
var bit19 = !packet.ReadBit(); // +19
var bit69 = !packet.ReadBit(); // +69
var bit120 = !packet.ReadBit(); // +120
var splineCount = (int)packet.ReadBits(20); // +92
var bit16 = !packet.ReadBit(); // +16
ownerGUID[3] = packet.ReadBit(); // +35 - 3
var bit108 = !packet.ReadBit(); // +108
var bit22 = !packet.ReadBit(); // +22
var bit109 = !packet.ReadBit(); // +109
var bit20 = !packet.ReadBit(); // +20
ownerGUID[7] = packet.ReadBit(); // +39 - 7
ownerGUID[4] = packet.ReadBit(); // +36 - 4
var bit18 = !packet.ReadBit(); // +18
ownerGUID[5] = packet.ReadBit(); // +37 - 5
var bits124 = (int)packet.ReadBits(22); // +124
ownerGUID[6] = packet.ReadBit(); // +38 - 6
packet.ReadBit(); // fake bit
packet.StartBitStream(guid2, 7, 1, 3, 0, 6, 4, 5, 2);
var bit176 = packet.ReadBit(); // +176
var bits84 = 0u;
if (bit176)
{
packet.ReadBits("bits74", 2);
bits84 = packet.ReadBits(22);
}
packet.ReadBit("bit56"); // +56
ownerGUID[2] = packet.ReadBit(); // +38 - 2
ownerGUID[1] = packet.ReadBit(); // +33 - 1
var waypoints = new Vector3[bits124];
for (var i = 0; i < bits124; ++i)
{
var vec = packet.ReadPackedVector3();
waypoints[i].X = vec.X;
waypoints[i].Y = vec.Y;
waypoints[i].Z = vec.Z;
}
packet.ReadXORByte(ownerGUID, 1); // +33 - 1
packet.ParseBitStream(guid2, 6, 4, 1, 7, 0, 3, 5, 2);
var endpos = new Vector3();
for (var i = 0; i < splineCount; ++i)
{
var spot = new Vector3
{
Y = packet.ReadSingle(),
X = packet.ReadSingle(),
Z = packet.ReadSingle()
};
// client always taking first point
if (i == 0)
{
endpos = spot;
}
packet.AddValue("Spline Waypoint", spot, i);
}
if (bit18)
packet.ReadInt32("Int18"); // +18
if (splineType == 3)
{
packet.ParseBitStream(factingTargetGUID, 5, 7, 0, 4, 3, 2, 6, 1);
packet.WriteGuid("Facting Target GUID", factingTargetGUID);
}
packet.ReadXORByte(ownerGUID, 5); // +37 - 5
if (bit21)
packet.ReadSingle("Float21"); // +21
if (bit176)
{
for (var i = 0; i < bits84; ++i)
{
packet.ReadInt16("short36+4", i);
packet.ReadInt16("short36+0", i);
}
packet.ReadSingle("Float42"); // +42
packet.ReadInt16("Int82"); // +82
packet.ReadInt16("Int86"); // +86
packet.ReadSingle("Float40"); // +40
}
if (bit19)
packet.ReadInt32("Int19"); // +19
if (splineType == 4)
packet.ReadSingle("Facing Angle"); // +45
packet.ReadXORByte(ownerGUID, 3); // +35 - 3
if (bit16)
packet.ReadInt32E<SplineFlag>("Spline Flags"); // +16
if (bit69)
packet.ReadByte("Byte69"); // +69
packet.ReadXORByte(ownerGUID, 6); // +38 - 6
if (bit109)
packet.ReadByte("Byte109"); // +109
if (splineType == 2)
{
packet.ReadSingle("Float48"); // +48
packet.ReadSingle("Float49"); // +49
packet.ReadSingle("Float50"); // +50
}
packet.ReadXORByte(ownerGUID, 0); // +32 - 0
if (bit120)
packet.ReadByte("Byte120"); // +120
if (bit108)
packet.ReadByte("Byte108"); // +108
packet.ReadXORByte(ownerGUID, 7); // +39 - 7
packet.ReadXORByte(ownerGUID, 2); // +34 - 2
if (bit22)
packet.ReadInt32("Int22"); // +22
packet.ReadXORByte(ownerGUID, 4); // +36 - 4
if (bit20)
packet.ReadInt32("Move Time"); // +20
// Calculate mid pos
var mid = new Vector3();
mid.X = (pos.X + endpos.X) * 0.5f;
mid.Y = (pos.Y + endpos.Y) * 0.5f;
mid.Z = (pos.Z + endpos.Z) * 0.5f;
for (var i = 0; i < bits124; ++i)
{
var vec = new Vector3
{
X = mid.X - waypoints[i].X,
Y = mid.Y - waypoints[i].Y,
Z = mid.Z - waypoints[i].Z
};
packet.AddValue("Waypoint", vec, i);
}
packet.WriteGuid("Owner GUID", ownerGUID);
packet.WriteGuid("GUID2", guid2);
packet.AddValue("Position", pos);
}
public static void HandleMonsterMove(Packet packet)
{
packet.ReadPackedGuid("GUID");
if (packet.Opcode == Opcodes.GetOpcode(Opcode.SMSG_MONSTER_MOVE_TRANSPORT))
{
packet.ReadPackedGuid("Transport GUID");
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadByte("Transport Seat");
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadBoolean("Toggle AnimTierInTrans");
var pos = packet.ReadVector3("Position");
packet.ReadInt32("Move Ticks");
var type = packet.ReadEnum<SplineType>("Spline Type", TypeCode.Byte);
switch (type)
{
case SplineType.FacingSpot:
{
packet.ReadVector3("Facing Spot");
break;
}
case SplineType.FacingTarget:
{
packet.ReadGuid("Facing GUID");
break;
}
case SplineType.FacingAngle:
{
packet.ReadSingle("Facing Angle");
break;
}
case SplineType.Stop:
return;
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V4_2_2_14545))
{
// Not the best way
ReadSplineMovement422(ref packet, pos);
return;
}
var flags = packet.ReadEnum<SplineFlag>("Spline Flags", TypeCode.Int32);
if (flags.HasAnyFlag(SplineFlag.AnimationTier))
{
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
packet.ReadInt32("Async-time in ms");
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag.Trajectory))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Async-time in ms");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag.Flying | SplineFlag.CatmullRom))
{
for (var i = 0; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
var mid = new Vector3();
mid.X = (pos.X + newpos.X) * 0.5f;
mid.Y = (pos.Y + newpos.Y) * 0.5f;
mid.Z = (pos.Z + newpos.Z) * 0.5f;
for (var i = 1; i < waypoints; i++)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.WriteLine("[" + i + "]" + " Waypoint: " + vec);
}
}
}
public static void HandleMonsterMove(Packet packet)
{
var pos = new Vector3();
var guid2 = new byte[8];
var factingTargetGUID = new byte[8];
var ownerGUID = new byte[8];
ownerGUID[4] = packet.ReadBit();
var bit40 = !packet.ReadBit();
var hasTime = !packet.ReadBit();
ownerGUID[3] = packet.ReadBit();
var bit30 = !packet.ReadBit();
packet.ReadBit(); // fake bit
var splineCount = (int)packet.ReadBits(20);
var bit98 = packet.ReadBit();
var splineType = (int)packet.ReadBits(3);
if (splineType == 3)
packet.StartBitStream(factingTargetGUID, 0, 7, 3, 4, 5, 6, 1, 2);
var bit55 = !packet.ReadBit();
var bit60 = !packet.ReadBit();
var bit54 = !packet.ReadBit();
var bit34 = !packet.ReadBit();
ownerGUID[6] = packet.ReadBit();
ownerGUID[1] = packet.ReadBit();
ownerGUID[0] = packet.ReadBit();
packet.StartBitStream(guid2, 1, 3, 4, 5, 6, 0, 7, 2);
ownerGUID[5] = packet.ReadBit();
var bit20 = packet.ReadBit();
ownerGUID[7] = packet.ReadBit();
var bit2D = !packet.ReadBit();
var bits84 = 0u;
if (bit98)
{
packet.ReadBits("bits74", 2);
bits84 = packet.ReadBits(22);
}
var hasFlags = !packet.ReadBit();
ownerGUID[2] = packet.ReadBit();
var bits64 = (int)packet.ReadBits(22);
var bit0 = !packet.ReadBit();
packet.ReadSingle("Float14");
if (splineType == 3)
{
packet.ParseBitStream(factingTargetGUID, 1, 6, 4, 3, 5, 0, 2, 7);
packet.WriteGuid("Facting Target GUID", factingTargetGUID);
}
packet.ReadXORByte(ownerGUID, 5);
if (bit54)
packet.ReadByte("Byte54");
packet.ReadXORByte(ownerGUID, 4);
if (bit98)
{
packet.ReadSingle("Float88");
for (var i = 0; i < bits84; ++i)
{
packet.ReadInt16("short74+2", i);
packet.ReadInt16("short74+0", i);
}
packet.ReadInt16("Int8C");
packet.ReadInt16("Int94");
packet.ReadSingle("Float90");
}
if (hasFlags)
packet.ReadEnum<SplineFlag434>("Spline Flags", TypeCode.Int32);
if (bit40)
packet.ReadInt32("Int40");
if (bit2D)
packet.ReadByte("Byte2D");
Vector3 endpos = new Vector3();
for (var i = 0; i < splineCount; ++i)
{
var spot = new Vector3
{
Y = packet.ReadSingle(),
X = packet.ReadSingle(),
Z = packet.ReadSingle(),
};
// client always taking first point
if (i == 0)
{
endpos = spot;
}
packet.AddValue("Spline Waypoint", spot, i);
}
packet.ParseBitStream(guid2, 6, 7, 2, 5, 3, 4, 1, 0);
if (bit55)
packet.ReadByte("Byte55");
packet.ReadInt32("Move Ticks");
packet.ReadXORByte(ownerGUID, 0);
if (splineType == 4)
packet.ReadSingle("Facing Angle");
pos.Y = packet.ReadSingle();
if (bit0)
packet.ReadSingle("Float3C");
packet.ReadXORByte(ownerGUID, 7);
packet.ReadXORByte(ownerGUID, 1);
var waypoints = new Vector3[bits64];
for (var i = 0; i < bits64; ++i)
{
var vec = packet.ReadPackedVector3();
waypoints[i].X = vec.X;
waypoints[i].Y = vec.Y;
waypoints[i].Z = vec.Z;
}
if (splineType == 2)
{
packet.ReadSingle("FloatA8");
packet.ReadSingle("FloatAC");
packet.ReadSingle("FloatB0");
}
if (hasTime)
packet.ReadInt32("Move Time in ms");
if (bit30)
packet.ReadInt32("Int30");
packet.ReadXORByte(ownerGUID, 6);
packet.ReadSingle("Float1C");
packet.ReadXORByte(ownerGUID, 3);
pos.X = packet.ReadSingle();
packet.ReadXORByte(ownerGUID, 2);
if (bit34)
packet.ReadInt32("Int34");
if (bit60)
packet.ReadByte("Byte60");
packet.ReadSingle("Float18");
pos.Z = packet.ReadSingle();
// Calculate mid pos
var mid = new Vector3();
mid.X = (pos.X + endpos.X) * 0.5f;
mid.Y = (pos.Y + endpos.Y) * 0.5f;
mid.Z = (pos.Z + endpos.Z) * 0.5f;
for (var i = 0; i < bits64; ++i)
{
var vec = new Vector3
{
X = mid.X - waypoints[i].X,
Y = mid.Y - waypoints[i].Y,
Z = mid.Z - waypoints[i].Z,
};
packet.AddValue("Waypoint", vec, i);
}
packet.WriteGuid("Owner GUID", ownerGUID);
packet.WriteGuid("GUID2", guid2);
packet.AddValue("Position", pos);
}
public static void HandleMonsterMove(Packet packet)
{
var guid = packet.ReadPackedGuid("GUID");
if (Storage.Objects != null && Storage.Objects.ContainsKey(guid))
{
var obj = Storage.Objects[guid].Item1;
UpdateField uf;
if (obj.UpdateFields != null && obj.UpdateFields.TryGetValue(UpdateFields.GetUpdateField(UnitField.UNIT_FIELD_FLAGS), out uf))
if ((uf.UInt32Value & (uint)UnitFlags.IsInCombat) == 0) // movement could be because of aggro so ignore that
obj.Movement.HasWpsOrRandMov = true;
}
if (packet.Opcode == Opcodes.GetOpcode(Opcode.SMSG_MONSTER_MOVE_TRANSPORT, Direction.ServerToClient))
{
packet.ReadPackedGuid("Transport GUID");
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadByte("Transport Seat");
}
if (ClientVersion.AddedInVersion(ClientVersionBuild.V3_1_0_9767)) // no idea when this was added exactly
packet.ReadBool("Toggle AnimTierInTrans");
var pos = packet.ReadVector3("Position");
packet.ReadInt32("Move Ticks");
var type = packet.ReadByteE<SplineType>("Spline Type");
switch (type)
{
case SplineType.FacingSpot:
{
packet.ReadVector3("Facing Spot");
break;
}
case SplineType.FacingTarget:
{
packet.ReadGuid("Facing GUID");
break;
}
case SplineType.FacingAngle:
{
packet.ReadSingle("Facing Angle");
break;
}
case SplineType.Stop:
return;
}
var flags = packet.ReadInt32E<SplineFlag>("Spline Flags");
if (flags.HasAnyFlag(SplineFlag.Animation))
{
packet.ReadByteE<MovementAnimationState>("Animation State");
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag.Parabolic))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Async-time in ms");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag.UncompressedPath))
{
for (var i = 0; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
var mid = new Vector3
{
X = (pos.X + newpos.X)*0.5f,
Y = (pos.Y + newpos.Y)*0.5f,
Z = (pos.Z + newpos.Z)*0.5f
};
if (waypoints != 1)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.AddValue("Waypoint", vec, 0);
if (waypoints > 2)
{
for (var i = 1; i < waypoints - 1; ++i)
{
vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.AddValue("Waypoint", vec, i);
}
}
}
}
}
public static void HandleMonsterMove(Packet packet)
{
var pos = new Vector3();
var ownerGUID = new byte[8];
var guid2 = new byte[8];
var factingTargetGUID = new byte[8];
packet.ReadSingle("Float30");
packet.ReadInt32("Int28");
packet.ReadSingle("Float34");
packet.ReadSingle("Float2C");
pos.X = packet.ReadSingle();
pos.Y = packet.ReadSingle();
pos.Z = packet.ReadSingle();
ownerGUID[3] = packet.ReadBit();
var bit40 = !packet.ReadBit();
ownerGUID[6] = packet.ReadBit();
var bit45 = !packet.ReadBit();
var bit6D = !packet.ReadBit();
var splineType = packet.ReadBits(3);
var bit78 = !packet.ReadBit();
ownerGUID[2] = packet.ReadBit();
ownerGUID[7] = packet.ReadBit();
ownerGUID[5] = packet.ReadBit();
if (splineType == 3)
packet.StartBitStream(factingTargetGUID, 6, 7, 0, 5, 2, 3, 4, 1);
var bit58 = !packet.ReadBit();
ownerGUID[4] = packet.ReadBit();
var waypointCount = packet.ReadBits(22);
var bit4C = !packet.ReadBit();
packet.ReadBit(); // fake bit
ownerGUID[0] = packet.ReadBit();
guid2[3] = packet.ReadBit();
guid2[6] = packet.ReadBit();
guid2[5] = packet.ReadBit();
guid2[0] = packet.ReadBit();
guid2[1] = packet.ReadBit();
guid2[2] = packet.ReadBit();
guid2[4] = packet.ReadBit();
guid2[7] = packet.ReadBit();
var bit6C = !packet.ReadBit();
var bit54 = !packet.ReadBit();
var bit48 = !packet.ReadBit();
var splineCount = (int)packet.ReadBits(20);
ownerGUID[1] = packet.ReadBit();
var bitB0 = packet.ReadBit();
var bits8C = 0u;
if (bitB0)
{
bits8C = packet.ReadBits(22);
packet.ReadBits("bits9C", 2);
}
var bit38 = packet.ReadBit();
var bit50 = !packet.ReadBit();
if (splineType == 3)
{
packet.ParseBitStream(factingTargetGUID, 5, 3, 6, 1, 4, 2, 0, 7);
packet.WriteGuid("Facting Target GUID", factingTargetGUID);
}
packet.ReadXORByte(ownerGUID, 3);
packet.ParseBitStream(guid2, 7, 3, 2, 0, 6, 4, 5, 1);
if (bitB0)
{
packet.ReadSingle("FloatA0");
for (var i = 0; i < bits8C; ++i)
{
packet.ReadInt16("short74+2", i);
packet.ReadInt16("short74+0", i);
}
packet.ReadSingle("FloatA8");
packet.ReadInt16("IntA4");
packet.ReadInt16("IntAC");
}
if (bit6D)
packet.ReadByte("Byte6D");
if (splineType == 4)
packet.ReadSingle("Facing Angle");
if (bit40)
packet.ReadInt32("Int40");
packet.ReadXORByte(ownerGUID, 7);
if (bit78)
packet.ReadByte("Byte78");
if (bit4C)
packet.ReadInt32("Int4C");
if (bit45)
packet.ReadByte("Byte45");
var waypoints = new Vector3[waypointCount];
for (var i = 0; i < waypointCount; ++i)
{
var vec = packet.ReadPackedVector3();
waypoints[i].X = vec.X;
waypoints[i].Y = vec.Y;
waypoints[i].Z = vec.Z;
}
packet.ReadXORByte(ownerGUID, 5);
packet.ReadXORByte(ownerGUID, 1);
packet.ReadXORByte(ownerGUID, 2);
if (bit48)
packet.ReadInt32("Int48");
Vector3 endpos = new Vector3();
for (var i = 0; i < splineCount; ++i)
{
var spot = new Vector3
{
X = packet.ReadSingle(),
Y = packet.ReadSingle(),
Z = packet.ReadSingle()
};
// client always taking first point
if (i == 0)
{
endpos = spot;
}
packet.AddValue("Spline Waypoint", spot, i);
}
packet.ReadXORByte(ownerGUID, 6);
if (bit50)
packet.ReadInt32("Int50");
if (splineType == 2)
{
packet.ReadSingle("FloatC0");
packet.ReadSingle("FloatC4");
packet.ReadSingle("FloatC8");
}
if (bit54)
packet.ReadSingle("Float54");
if (bit6C)
packet.ReadByte("Byte6C");
packet.ReadXORByte(ownerGUID, 0);
if (bit58)
packet.ReadInt32("Int58");
packet.ReadXORByte(ownerGUID, 4);
// Calculate mid pos
var mid = new Vector3();
mid.X = (pos.X + endpos.X) * 0.5f;
mid.Y = (pos.Y + endpos.Y) * 0.5f;
mid.Z = (pos.Z + endpos.Z) * 0.5f;
for (var i = 0; i < waypointCount; ++i)
{
var vec = new Vector3
{
X = mid.X - waypoints[i].X,
Y = mid.Y - waypoints[i].Y,
Z = mid.Z - waypoints[i].Z
};
packet.AddValue("Waypoint", vec, i);
}
packet.WriteGuid("Owner GUID", ownerGUID);
packet.WriteGuid("Guid2", guid2);
}
public static void HandleOnMonsterMove(Packet packet)
{
var guid3 = new byte[8];
var target = new byte[8];
var pos = new Vector3();
pos.Z = packet.ReadSingle(); // 24
pos.X = packet.ReadSingle(); // 16
packet.ReadInt32("Spline ID");
pos.Y = packet.ReadSingle(); //20
packet.WriteLine("Pos: {0}", pos);
var transportPos = new Vector3
{
Y = packet.ReadSingle(), // 48
Z = packet.ReadSingle(), // 52
X = packet.ReadSingle(), // 44
};
packet.WriteLine("transportPos: {0}", transportPos);
var hasAngle = !packet.ReadBit("!hasAngle");
guid3[0] = packet.ReadBit();
var splineType = packet.ReadBitsE<SplineType>("Spline Type", 3);
if (splineType == SplineType.FacingTarget)
{
target = packet.StartBitStream(6, 4, 3, 0, 5, 7, 1, 2); // 184
}
var unk76 = !packet.ReadBit("!unk76");
var unk69 = !packet.ReadBit("!unk69");
var unk120 = -packet.ReadBit("unk120");
var uncompressedSplineCount = packet.ReadBits("uncompressedSplineCount", 20);
var hasSplineFlags = !packet.ReadBit("!hasSplineFlags");
guid3[3] = packet.ReadBit();
var unk108 = !packet.ReadBit("!unk108");
var unk88 = !packet.ReadBit("!unk88");
var unk109 = !packet.ReadBit("!unk109");
var hasDutation = !packet.ReadBit("!hasduration");
guid3[7] = packet.ReadBit();
guid3[4] = packet.ReadBit();
var unk72 = !packet.ReadBit("!unk72");
guid3[5] = packet.ReadBit();
var compressedSplineCount = packet.ReadBits("compressedSplineCount", 22);
guid3[6] = packet.ReadBit();
var unk112 = packet.ReadBit("!unk112") ? 0u : 1u;
var guid2 = packet.StartBitStream(7, 1, 3, 0, 6, 4, 5, 2); // 112
var unk176 = packet.ReadBit("unk176");
var unk78 = 0u;
var count140 = 0u;
if (unk176)
{
unk78 = packet.ReadBits("unk78*2", 2);
count140 = packet.ReadBits("count140", 22);
}
var unk56 = packet.ReadBit("unk56");
guid3[2] = packet.ReadBit();
guid3[1] = packet.ReadBit();
for (var i = 0; i < compressedSplineCount; i++)
{
var vec = packet.ReadPackedVector3();
vec.X += pos.X;
vec.Y += pos.Y;
vec.Z += pos.Z;
packet.WriteLine("[{0}] Waypoint: {1}", i, vec); // not completed
}
packet.ParseBitStream(guid3, 1);
packet.ParseBitStream(guid2, 6, 4, 1, 7, 0, 3, 5, 2);
packet.WriteGuid("Guid2", guid2);
for (var i = 0; i < uncompressedSplineCount; i++)
{
var point = new Vector3
{
Y = packet.ReadSingle(), // 100
X = packet.ReadSingle(), // 96
Z = packet.ReadSingle(), // 104
};
packet.WriteLine("[{0}] Point: {1}", i, point);
}
if (unk72)
packet.ReadInt32("unk72");
if (splineType == SplineType.FacingTarget)
{
packet.ParseBitStream(target, 5, 7, 0, 4, 3, 2, 6, 1);
packet.WriteGuid("Target", target);
}
packet.ParseBitStream(guid3, 5);
if (hasAngle)
packet.ReadSingle("Angle");
if (unk176)
{
for (var i = 0; i < count140; i++)
{
packet.ReadInt16("unk146", i);
packet.ReadInt16("unk144", i);
}
packet.ReadSingle("unka8h*4");
packet.ReadInt16("unk82*2");
packet.ReadInt16("unk86*2");
packet.ReadSingle("unka0h*4");
}
if (unk76)
packet.ReadInt32("unk76");
if (splineType == SplineType.FacingAngle)
packet.ReadSingle("Facing Angle");
packet.ParseBitStream(guid3, 3);
if (hasSplineFlags)
packet.ReadUInt32E<SplineFlag>("Spline Flags");
if (unk69)
packet.ReadByte("unk69");
packet.ParseBitStream(guid3, 6);
if (unk109)
packet.ReadByte("unk109");
if (splineType == SplineType.FacingSpot)
{
var facingSpot = new Vector3
{
X = packet.ReadSingle(),
Y = packet.ReadSingle(),
Z = packet.ReadSingle(),
};
packet.WriteLine("Facing spot: {0}", facingSpot);
}
packet.ParseBitStream(guid3, 0);
if (unk120 != -1)
packet.ReadByte("unk120");
if (unk108)
packet.ReadByte("unk108");
packet.ParseBitStream(guid3, 7, 2);
if (unk88)
packet.ReadInt32("unk88");
packet.ParseBitStream(guid3, 4);
if (hasDutation)
packet.ReadInt32("Spline Duration");
packet.WriteGuid("Unit", guid3);
var guidUnit = new WowGuid64(BitConverter.ToUInt64(guid3, 0));
if (!Storage.Objects.IsEmpty() && Storage.Objects.ContainsKey(guidUnit))
{
var obj = Storage.Objects[guidUnit].Item1;
UpdateField uf;
if (obj.UpdateFields != null && obj.UpdateFields.TryGetValue(UpdateFields.GetUpdateField(UnitField.UNIT_FIELD_FLAGS), out uf))
if ((uf.UInt32Value & (uint)UnitFlags.IsInCombat) == 0) // movement could be because of aggro so ignore that
obj.Movement.HasWpsOrRandMov = true;
}
}
private static void ReadSplineMovement434(ref Packet packet, Vector3 pos)
{
var flags = packet.ReadEnum<SplineFlag434>("Spline Flags", TypeCode.Int32);
if (flags.HasAnyFlag(SplineFlag434.Animation))
{
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag434.Parabolic))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Async-time in ms");
}
var waypoints = packet.ReadInt32("Waypoints");
if (flags.HasAnyFlag(SplineFlag434.UncompressedPath))
{
for (var i = 0; i < waypoints; i++)
packet.ReadVector3("Waypoint", i);
}
else
{
var newpos = packet.ReadVector3("Waypoint Endpoint");
var mid = new Vector3();
mid.X = (pos.X + newpos.X) * 0.5f;
mid.Y = (pos.Y + newpos.Y) * 0.5f;
mid.Z = (pos.Z + newpos.Z) * 0.5f;
if (waypoints != 1)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.WriteLine("[0] Waypoint: " + vec);
if (waypoints > 2)
{
for (var i = 1; i < waypoints - 1; ++i)
{
vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.WriteLine("[" + i + "]" + " Waypoint: " + vec);
}
}
}
}
}
public static void HandleMonsterMove(Packet packet)
{
var ownerGUID = new byte[8];
var guid2 = new byte[8];
var factingTargetGUID = new byte[8];
var pos = new Vector3();
packet.ReadSingle("Float34");
packet.ReadInt32("Move Ticks");
pos.X = packet.ReadSingle();
pos.Z = packet.ReadSingle();
packet.ReadSingle("Float30");
packet.ReadSingle("Float2C");
pos.Y = packet.ReadSingle();
packet.ReadBit("bit38");
packet.ReadBit(); // fake bit
var bit6C = !packet.ReadBit();
ownerGUID[4] = packet.ReadBit();
var hasTime = !packet.ReadBit();
ownerGUID[1] = packet.ReadBit();
var bit6D = !packet.ReadBit();
ownerGUID[2] = packet.ReadBit();
var bit4C = !packet.ReadBit();
packet.StartBitStream(guid2, 6, 1, 3, 5, 2, 7, 4, 0);
var bit8C = packet.ReadBit();
ownerGUID[3] = packet.ReadBit();
var hasFlags = !packet.ReadBit();
var waypointCount = packet.ReadBits(22);
packet.StartBitStream(ownerGUID, 5, 0);
var hasAnimationTime = !packet.ReadBit();
var hasParabolicTime = !packet.ReadBit();
ownerGUID[6] = packet.ReadBit();
var bits90 = 0u;
if (bit8C)
{
bits90 = packet.ReadBits(22);
packet.ReadBits("bitsA0", 2);
}
var hasAnimationState = !packet.ReadBit();
var splineType = packet.ReadBits(3);
var splineCount = packet.ReadBits(20);
if (splineType == 3)
packet.StartBitStream(factingTargetGUID, 5, 3, 6, 2, 1, 4, 7, 0);
var hasParabolicSpeed = !packet.ReadBit();
ownerGUID[7] = packet.ReadBit();
var bit78 = packet.ReadBit();
packet.ResetBitReader();
packet.ReadXORByte(ownerGUID, 2);
if (splineType == 3)
{
packet.ParseBitStream(factingTargetGUID, 1, 0, 6, 5, 3, 4, 7, 2);
packet.WriteGuid("Facting Target GUID", factingTargetGUID);
}
if (bit6D)
packet.ReadByte("byte6D");
if (hasParabolicTime)
packet.ReadInt32("Async-time in ms");
if (hasAnimationState)
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
if (hasTime)
packet.ReadInt32("Move Time in ms");
packet.ReadXORBytes(ownerGUID, 7, 1);
if (hasParabolicSpeed)
packet.ReadSingle("Vertical Speed");
packet.ReadXORByte(ownerGUID, 0);
if (bit8C)
{
for (var i = 0; i < bits90; ++i)
{
packet.ReadInt16("short94+2", i);
packet.ReadInt16("short94+0", i);
}
packet.ReadInt16("shortA8");
packet.ReadInt16("shortB0");
packet.ReadSingle("floatAC");
packet.ReadSingle("floatA4");
}
if (hasFlags)
packet.ReadEnum<SplineFlag434>("Spline Flags", TypeCode.Int32);
if (splineType == 2)
packet.ReadVector3("Facing Spot");
if (bit6C)
packet.ReadByte("byte6C");
packet.ReadXORBytes(guid2, 4, 1, 0, 7, 5, 6, 3, 2);
Vector3 endpos = new Vector3();
for (var i = 0; i < splineCount; ++i)
{
// client always taking first point
if (i == 0)
endpos = packet.ReadVector3("Spline Waypoint", i);
else
packet.ReadVector3("Spline Waypoint", i);
}
packet.ReadXORBytes(ownerGUID, 6, 3, 5);
if (bit4C)
packet.ReadInt32("int4C");
if (splineType == 4)
packet.ReadSingle("Facing Angle");
if (!bit78)
packet.ReadByte("byte78");
packet.ReadXORByte(ownerGUID, 4);
if (hasAnimationTime)
packet.ReadInt32("Asynctime in ms"); // Async-time in ms
// Calculate mid pos
var mid = new Vector3();
mid.X = (pos.X + endpos.X) * 0.5f;
mid.Y = (pos.Y + endpos.Y) * 0.5f;
mid.Z = (pos.Z + endpos.Z) * 0.5f;
for (var i = 0; i < waypointCount; ++i)
{
// sub_7D11B4(result& wp, int32(from packet), mid)
var vec = packet.ReadPackedVector3();
vec.X = mid.X - vec.X;
vec.Y = mid.Y - vec.Y;
vec.Z = mid.Z - vec.Z;
packet.WriteLine("[{0}] Waypoint: {1}", i, vec);
}
packet.WriteGuid("Owner GUID", ownerGUID);
packet.WriteGuid("GUID2", guid2);
packet.WriteLine("Position: {0}", pos);
}
public static void ReadMovementSpline(Packet packet, Vector3 pos, params object[] indexes)
{
packet.ReadInt32E<SplineFlag434>("Flags", indexes);
packet.ReadByte("AnimTier", indexes);
packet.ReadUInt32("TierTransStartTime", indexes);
packet.ReadInt32("Elapsed", indexes);
packet.ReadUInt32("MoveTime", indexes);
packet.ReadSingle("JumpGravity", indexes);
packet.ReadUInt32("SpecialTime", indexes);
var pointsCount = packet.ReadInt32("PointsCount", indexes);
packet.ReadByte("Mode", indexes);
packet.ReadByte("VehicleExitVoluntary", indexes);
packet.ReadPackedGuid128("TransportGUID", indexes);
packet.ReadSByte("VehicleSeat", indexes);
var packedDeltasCount = packet.ReadInt32("PackedDeltasCount", indexes);
Vector3 endpos = new Vector3();
for (int i = 0; i < pointsCount; i++)
{
var spot = packet.ReadVector3();
// client always taking first point
if (i == 0)
endpos = spot;
packet.AddValue("Points", spot, indexes, i);
}
var waypoints = new Vector3[packedDeltasCount];
for (int i = 0; i < packedDeltasCount; i++)
{
var packedDeltas = packet.ReadPackedVector3();
waypoints[i].X = packedDeltas.X;
waypoints[i].Y = packedDeltas.Y;
waypoints[i].Z = packedDeltas.Z;
}
packet.ResetBitReader();
var type = packet.ReadBits("Face", 2, indexes);
var monsterSplineFilter = packet.ReadBit("HasMonsterSplineFilter", indexes);
switch (type)
{
case 1:
packet.ReadVector3("FaceSpot", indexes);
break;
case 2:
packet.ReadSingle("FaceDirection", indexes);
packet.ReadPackedGuid128("FacingGUID", indexes);
break;
case 3:
packet.ReadSingle("FaceDirection", indexes);
break;
}
if (monsterSplineFilter)
ReadMonsterSplineFilter(packet, indexes, "MonsterSplineFilter");
// Calculate mid pos
var mid = new Vector3
{
X = (pos.X + endpos.X) * 0.5f,
Y = (pos.Y + endpos.Y) * 0.5f,
Z = (pos.Z + endpos.Z) * 0.5f
};
for (var i = 0; i < packedDeltasCount; ++i)
{
var vec = new Vector3
{
X = mid.X - waypoints[i].X,
Y = mid.Y - waypoints[i].Y,
Z = mid.Z - waypoints[i].Z
};
packet.AddValue("WayPoints", vec, indexes, i);
}
}
public static void HandleMonsterMove(Packet packet)
{
packet.ReadPackedGuid("GUID");
if (packet.Opcode == Opcodes.GetOpcode(Opcode.SMSG_MONSTER_MOVE_TRANSPORT))
{
packet.ReadPackedGuid("Transport GUID");
packet.ReadByte("Transport Seat");
}
packet.ReadBoolean("Unk Boolean"); // Something to do with IsVehicleExitVoluntary ?
var pos = packet.ReadVector3("Position");
packet.ReadInt32("Move Ticks");
var type = packet.ReadEnum<SplineType>("Spline Type", TypeCode.Byte);
switch (type)
{
case SplineType.FacingSpot:
{
packet.ReadVector3("Facing Spot");
break;
}
case SplineType.FacingTarget:
{
packet.ReadGuid("Facing GUID");
break;
}
case SplineType.FacingAngle:
{
packet.ReadSingle("Facing Angle");
break;
}
case SplineType.Stop:
return;
}
var flags = packet.ReadEnum<SplineFlag>("Spline Flags", TypeCode.Int32);
if (flags.HasAnyFlag(SplineFlag.AnimationTier))
{
packet.ReadEnum<MovementAnimationState>("Animation State", TypeCode.Byte);
packet.ReadInt32("Unk Int32 1");
}
if (flags.HasAnyFlag(SplineFlag.Falling)) // Could be SplineFlag.UsePathSmoothing
{
packet.ReadInt32("Unknown");
packet.ReadInt16("Unknown");
packet.ReadInt16("Unknown");
}
packet.ReadInt32("Move Time");
if (flags.HasAnyFlag(SplineFlag.Trajectory))
{
packet.ReadSingle("Vertical Speed");
packet.ReadInt32("Unk Int32 2");
}
var waypoints = packet.ReadInt32("Waypoints");
var newpos = packet.ReadVector3("Waypoint 0");
if (flags.HasAnyFlag(SplineFlag.Flying) || flags.HasAnyFlag(SplineFlag.CatmullRom))
for (var i = 0; i < waypoints - 1; i++)
packet.ReadVector3("Waypoint " + (i + 1));
else
{
var mid = new Vector3();
mid.X = (pos.X + newpos.X) * 0.5f;
mid.Y = (pos.Y + newpos.Y) * 0.5f;
mid.Z = (pos.Z + newpos.Z) * 0.5f;
for (var i = 0; i < waypoints - 1; i++)
{
var vec = packet.ReadPackedVector3();
vec.X += mid.X;
vec.Y += mid.Y;
vec.Z += mid.Z;
packet.Writer.WriteLine("Waypoint " + (i + 1) + ": " + vec);
}
}
}
