/// <summary>
/// 已知三角形的三个顶点坐标，计算三角形的高
/// </summary>
/// <param name="A">顶点</param>
/// <param name="B">左顶点</param>
/// <param name="C">右顶点</param>
/// <returns>高</returns>
//private Double ComputePeakHeight(PointF A, PointF B, PointF C)
//{
// Double height = 0;
// //垂直基线求高
// //Double a = Math.Sqrt(Math.Pow((C.Y - B.Y), 2) + Math.Pow((C.X - B.X), 2));
// //Double b = Math.Sqrt(Math.Pow((A.Y - C.Y), 2) + Math.Pow((A.X - C.X), 2));
// //Double c = Math.Sqrt(Math.Pow((B.Y - A.Y), 2) + Math.Pow((B.X - A.X), 2));
// //Double p = 0.5 * (a + b + c);
// //height = Math.Sqrt(p * (p - a) * (p - b) * (p - c)) * 2 / a;
// //顶点纵坐标值求高
// //height = A.Y - B.Y;
// //垂线与基线相交求高
// Double factor = (C.Y - B.Y) / (C.X - B.X);
// Double _y = (A.X - B.X) * factor + B.Y;
// height = A.Y - _y;
// //如果采用第一种求高未获取结果，采用如下第二种处理方法
// if (double.IsNaN(height) || height == 0)
// {
// height = Math.Min(Math.Abs(B.Y - A.Y), Math.Abs(C.Y - A.Y));
// height += Math.Abs(B.Y - C.Y) / 2;
// }
// return height;
//}
#endregion
#endregion
#region 原有代码
//#region 计算半峰宽
///// <summary>
///// 已知峰对象的高、峰曲线列表、基线起点和基线终点，计算半峰高宽
///// </summary>
///// <param name="height">峰高</param>
///// <param name="pList">峰曲线列表</param>
///// <param name="startBase">基线起点</param>
///// <param name="endBase">基线终点</param>
///// <returns>半峰宽</returns>
//private Double ComputeAnyHeightWidth(Double height, List<PointF> pList, Peak peak)
//{
// Double semiWidth = -1;
// List<PointF> _tmp = GetAnyPeakWidthPoint(peak, pList, height);
// semiWidth = Math.Abs(_tmp[2].X - _tmp[1].X);
// //semiWidth = Math.Sqrt(Math.Pow((_tmp[2].X - _tmp[1].X), 2) + Math.Pow((_tmp[2].Y - _tmp[1].Y), 2));
// return semiWidth;
//}
//#endregion
#endregion
#region 死时间
protected double GetDeadTime(List <Peak> peak_list, PeakCalculationMethod pcm)
{
double _dead_time = 0.0;
if (pcm.DeadTime_Method == PeakCalculationMethod.DeadTimeMethod.dtm_first_peak)
{
Peak _first_peak = peak_list.Find(CPeakFilter.FindNaturalPeak);
if (_first_peak != null)
{
_dead_time = _first_peak.PeakPoint.X;
}
else
{
_dead_time = pcm.DeadTime;
}
}
else
{
_dead_time = pcm.DeadTime;
}
return(_dead_time);
}
/// <summary>计算峰对象列表中所有峰对象的属性</summary>
/// <param name="peak_list">峰对象列表</param>
/// <param name="peak_group_curve">峰组曲线点列表</param>
/// <param name="pcm">计算方法参数</param>
/// <param name="filterMethod">过滤器方法</param>
/// <returns>QualitativeErrorInfo枚举</returns>
public QualitativeErrorInfo ComputePeakInfo(List <Peak> peak_list, List <PointF> peak_group_curve, PeakCalculationMethod pcm, System.Predicate <Peak> filterMethod)
{
if ((peak_list == null) || (peak_list.Count == 0) || (peak_group_curve == null))
{
return(QualitativeErrorInfo.PeakListError);
}
//获得需要计算的峰列表
List <Peak> _valid_peak_list = null;
if (filterMethod != null)
{
//_valid_peak_list = peak_list.FindAll(CPeakFilter.FindNaturalPeak);
_valid_peak_list = peak_list.FindAll(filterMethod);
if (_valid_peak_list == null)
{
return(QualitativeErrorInfo.PeakListError);
}
}
else
{
_valid_peak_list = peak_list;
}
//死时间
double _dead_time = GetDeadTime(peak_list, pcm);
//依次计算每个峰（有效峰）
foreach (Peak _p in _valid_peak_list)
{
ComputePeakInfo(_p, _dead_time, peak_group_curve);
}
//计算分离度，相邻两组分的色谱峰保留值之差与峰底宽总和一半的比值
ComputeResolution(_valid_peak_list);
return(QualitativeErrorInfo.Success);
}
public static QualitativeErrorInfo ComputePeakInfo(List <Peak> peak_list, List <PointF> curve_point, PeakCalculationMethod pcm, System.Predicate <Peak> filterMethod)
{
CCalculationBase _calculation = null;
switch (pcm.Pharmacopeia_Method)
{
case PeakCalculationMethod.PharmacopeiaMethod.pm_china:
_calculation = mCChina;
break;
case PeakCalculationMethod.PharmacopeiaMethod.pm_japan:
_calculation = mCJP;
break;
case PeakCalculationMethod.PharmacopeiaMethod.pm_japan2:
_calculation = mCJP2;
break;
case PeakCalculationMethod.PharmacopeiaMethod.pm_usp:
default:
_calculation = mCUSP;
break;
}
return(_calculation.ComputePeakInfo(peak_list, curve_point, pcm, filterMethod));
}
public static QualitativeErrorInfo ComputePeakInfo(List <Peak> peak_list, List <PointF> curve_point, PeakCalculationMethod pcm)
{
return(ComputePeakInfo(peak_list, curve_point, pcm, CPeakFilter.FindNaturalPeak));
}
