public void Move(double x, double y, double z)
{
Spin_matrix_z(x, y, z, camera.GetCursorPos().x, scalaVector, XYZ_d.ZERO);
scalaVector.Mul(speed);
if (!Check_Wall(scalaVector))
{
Position.Add(scalaVector);
}
}
public void Move(double x, double y, double z, double degree)
{
Spin_matrix_z(x, y, degree, scalaVector);
scalaVector.Mul(speed);
//scalaVector.Set(camera.rayDelta).Mul(y,y,y).Add(camera.basisX.x * x,camera.basisX.y * x,0).Mul(speed);
if (!Check_Wall(scalaVector))
{
Position.Add(scalaVector);
world.ConvertToInfinity(Position);
}
else
{
XYZ_d pos = new XYZ_d(Position).Add(scalaVector);
XYZ index = new XYZ();
world.GetFrameIndex(pos, index);
if (!world.isFrameEnabled(index))
{
Vector.z = -40;
}
}
}
public void Spin_XZAxis5()
{
position.Set(Position);
cursor.x += (Cursor.Position.X - screenPoint.X) * sensitivity;
cursor.y += (Cursor.Position.Y - screenPoint.Y) * sensitivity;
cursor.x %= 360;
cursor.y %= 360;
cursor.y = cursor.y > 90 ? 90 :
(cursor.y < -90 ? -90 : cursor.y);
Cursor.Position = screenPoint;
double degreeX = cursor.y * -PI;
double degreeY = cursor.x * PI;
double sinX = Math.Sin(degreeX);
double sinY = Math.Sin(degreeY);
double cosX = Math.Cos(degreeX);
double cosY = Math.Cos(degreeY);
bool isTargetSet = false;
basisX.Set(1, 0, 0);
basisY.Set(0, camSize.y - 1, 0);
basisZ.Set(0, 0, 1);
Spin_matrix_x(basisX.x, basisX.y, basisX.z, sinX, cosX, basisX);
Spin_matrix_z(basisX.x, basisX.y, basisX.z, sinY, cosY, basisX);
Spin_matrix_x(basisY.x, basisY.y, basisY.z, sinX, cosX, basisY);
Spin_matrix_z(basisY.x, basisY.y, basisY.z, sinY, cosY, basisY);
Spin_matrix_x(basisZ.x, basisZ.y, basisZ.z, sinX, cosX, basisZ);
Spin_matrix_z(basisZ.x, basisZ.y, basisZ.z, sinY, cosY, basisZ);
world.GetFrameIndex(position, PositionIndex);
Parallel.For(0, camSize.z, (int k) =>
{
Parallel.For(0, camSize.x, (int i) =>
{
int depth = 0;
board[k, i] = ' ';
perspBasisX[i, k].Set(basisX).Mul(perspArray[i, k].x);
perspBasisZ[i, k].Set(basisZ).Mul(perspArray[i, k].z);
spinArray[i, k].Set(perspBasisX[i, k]).Add(basisY).Add(perspBasisZ[i, k]);
XYZ_d delta = deltaArray[i, k].Set(spinArray[i, k]).Div(camSize.y);
XYZ_d index = indexArray[i, k].Set(position);
XYZ_d gap = new XYZ_d();
XYZ_d lpos = new XYZ_d();
XYZ frameIndex = new XYZ();
XYZ nextFrameIndexDelta = new XYZ();
XYZ_d target = new XYZ_d();
XYZ_d deltaSign = new XYZ_d();
if (delta.x != 0)
{
deltaSign.x = (Math.Abs(delta.x) / delta.x);
}
if (delta.y != 0)
{
deltaSign.y = (Math.Abs(delta.y) / delta.y);
}
if (delta.z != 0)
{
deltaSign.z = (Math.Abs(delta.z) / delta.z);
}
frameIndex.Set(PositionIndex);
double numOfDelta = 0;
for (int j = 0; j < camSize.y; j++)
{
if (!world.IsInFrame(frameIndex) || j == camSize.y - 1)
{
depth = depth < 0 ? 0 :
depth > 9 ? 9 : depth;
board[k, i] = level[depth];
break;
}
world.ConvertToFramePos(lpos.Set(index), frameIndex);
if (world.IsExistPixelInFrame(frameIndex))
{
if (i == camPoint.x && k == camPoint.z && !isTargetSet)
{
deleteFrameIndex.Set(frameIndex);
addFrameIndex.Set(frameIndex).Sub(nextFrameIndexDelta);
isTargetSet = true;
}
if (frameIndex.Equal(deleteFrameIndex))
{
depth += 3; //쳐다보는 블록 색깔
}
world.GetFrameIndex(index, gap);
if (gridEnabled && gap.Distance(PositionIndex) < 3) //3칸블록 이내 범위있을 경우 경계선표시.
{
bool Xaxis = Math.Abs(lpos.x) > world.frameLength / 2 - 1; //경계선 테두리 크기 1
bool Yaxis = Math.Abs(lpos.y) > world.frameLength / 2 - 1;
bool Zaxis = Math.Abs(lpos.z) > world.frameLength / 2 - 1;
int inv_color = world.GetColor(frameIndex);
if (inv_color > 5)
{
if (inv_color == 14)
{
inv_color = 9;
}
else
{
inv_color = 0;
}
}
else
{
inv_color = 9;
}
inv_color += (5 - inv_color) / 5 * 2;
if (Xaxis && Yaxis)
{
board[k, i] = level[inv_color]; break;
}
if (Yaxis && Zaxis)
{
board[k, i] = level[inv_color]; break;
}
if (Zaxis && Xaxis)
{
board[k, i] = level[inv_color]; break;
}
}
if (world.GetColor(frameIndex) == 14) // 거울만나면 반사.
{
if (nextFrameIndexDelta.x != 0)
{
delta.x = -delta.x;
deltaSign.x = -deltaSign.x;
}
else if (nextFrameIndexDelta.y != 0)
{
delta.y = -delta.y;
deltaSign.y = -deltaSign.y;
}
else if (nextFrameIndexDelta.z != 0)
{
delta.z = -delta.z;
deltaSign.z = -deltaSign.z;
}
frameIndex.Sub(nextFrameIndexDelta); // 일보후퇴
continue;
}
else if (world.GetColor(frameIndex) == 15) // 유리만나면 살짝 하얘지고 계속 진행.
{
depth = depth > 3 ? 3 : depth + 1;
}
else
{
depth += (int)(world.GetColor(frameIndex));
depth = depth < 0 ? 0 :
depth > 9 ? 9 : depth;
board[k, i] = level[depth];
break;
}
}
//현위치에서 delta벡터방향으로 이동할 경우 가장 먼저 만나는 경계면 구하기.
target.Set(world.frameLength / 2);
target.Mul(deltaSign); //delta벡터 방향으로 이동시 접촉가능한 경계면들 구하기.
target.Sub(lpos).Div(delta); //경계면들로부터 현재위치의 거리를 구하고 delta로 나누기. deltasign으로 한번 곱했었기때문에 x,y,z축 서로에 대한 정확한 비교값이 나오게된다.
nextFrameIndexDelta.Set(0);
if (target.x < target.y && target.x < target.z)
{
numOfDelta = target.x;
nextFrameIndexDelta.x = (int)deltaSign.x;
}
else if (target.y < target.x && target.y < target.z)
{
numOfDelta = target.y;
nextFrameIndexDelta.y = (int)deltaSign.y;
}
else if (target.z < target.x && target.z < target.y)
{
numOfDelta = target.z;
nextFrameIndexDelta.z = (int)deltaSign.z;
}
frameIndex.Add(nextFrameIndexDelta); //가장가까운 경계면에 해당하는 블록으로 이동.
index.Add(gap.Set(delta).Mul(numOfDelta)); //delta방향으로 가장 가까운 경계면으로 이동.
//여기까지 수정
}
});
});
rayDelta.Set(deltaArray[camPoint.x, camPoint.z]);
}
void Shoot(XYZ_b color, XYZ_d rayDelta)
{
XYZ_d delta = new XYZ_d(rayDelta);
XYZ_d lpos = new XYZ_d(delta).Mul(world.frameLength * 2).Add(Position);
XYZ frameIndex = new XYZ();
world.GetFrameIndex(lpos, frameIndex);
world.ConvertToFramePos(frameIndex, lpos);
XYZ frameIndex2 = new XYZ(frameIndex);
int nextDir = 0;
XYZ_d target = new XYZ_d();
XYZ_d deltaSign = new XYZ_d();
XYZ_d maxNumOfDelta = new XYZ_d(world.frameLength);
if (delta.x != 0)
{
deltaSign.x = (Math.Abs(delta.x) / delta.x);
}
if (delta.y != 0)
{
deltaSign.y = (Math.Abs(delta.y) / delta.y);
}
if (delta.z != 0)
{
deltaSign.z = (Math.Abs(delta.z) / delta.z);
}
maxNumOfDelta.Mul(deltaSign).Div(delta);
target.Set(world.halfFrameLength).Mul(deltaSign); //delta벡터 방향으로 이동시 접촉가능한 경계면들 구하기.
target.Sub(lpos).Div(delta); //경계면들로부터 현재위치의 거리를 구하고 delta로 나누기. deltasign으로 한번 곱했었기때문에 x,y,z축 서로에 대한 정확한 비교값이 나오게된다.
Task.Factory.StartNew(() =>
{
while (!world.isFrameEnabled(frameIndex))
{
world.ConvertToInfinity(frameIndex);
world.SetFrame(frameIndex2, false);
world.SetFrame(frameIndex, true);
world.SetColor(frameIndex, color);
if (target.x < target.y)
{
if (target.x < target.z)
{
nextDir = 0;
}
else
{
nextDir = 2;
}
}
else
if (target.y < target.z)
{
nextDir = 1;
}
else
{
nextDir = 2;
}
target.element[nextDir] += maxNumOfDelta.element[nextDir];
frameIndex2.Set(frameIndex);
frameIndex.element[nextDir] += (int)deltaSign.element[nextDir];
Thread.Sleep(10);
}
world.SetFrame(frameIndex2, false);
XYZ temp = new XYZ();
int scale = 10;
double distance = 0;
for (int i = -scale; i < scale; i++)
{
for (int j = -scale; j < scale; j++)
{
for (int k = -scale; k < scale; k++)
{
temp.Set(frameIndex).Add(i, j, k);
distance = frameIndex.Distance(temp);
if (distance < scale)
{
world.ConvertToInfinity(temp);
XYZ_b c = world.GetColor(temp);
//gap.x = (int)color.x - (int)c.x;
//gap.y = (int)color.y - (int)c.y;
//gap.z = (int)color.z - (int)c.z;
//gap.Mul((int)(scale - distance)).Div(scale);
//c.x = (byte)(c.x + gap.x);
//c.y = (byte)(c.y + gap.y);
//c.z = (byte)(c.z + gap.z);
temp.x = (int)color.x * (int)(scale - distance) / scale;
temp.y = (int)color.y * (int)(scale - distance) / scale;
temp.z = (int)color.z * (int)(scale - distance) / scale;
c.Add((byte)temp.x, (byte)temp.y, (byte)temp.z);
// world.SetFrame(temp, false);
//world.SetColor(temp, 255, 0, 0);
}
}
}
}
});
}
public void ConvertIndexToPosition(XYZ_d i)
{
i.Mul(frameLength).Add(frameLength / 2);
}
public void Spin_XZAxis5()
{
position.Set(Position);
cursor.x += (Cursor.Position.X - screenPoint.X) * sensitivity;
cursor.y += (Cursor.Position.Y - screenPoint.Y) * sensitivity;
cursor.x %= 360;
cursor.y %= 360;
cursor.y = cursor.y > 90 ? 90 :
(cursor.y < -90 ? -90 : cursor.y);
Cursor.Position = screenPoint;
double degreeX = cursor.y * -PI;
double degreeY = cursor.x * PI;
double sinX = Math.Sin(degreeX);
double sinY = Math.Sin(degreeY);
double cosX = Math.Cos(degreeX);
double cosY = Math.Cos(degreeY);
basisX.Set(cosY, -sinY, 0);
basisY.Set(cosX * sinY, cosX * cosY, -sinX).Mul(300);
basisZ.Set(sinX * sinY, sinX * cosY, cosX);
world.GetFrameIndex(position, PositionIndex); //현재 위치를 박스 단위 위치로 변환
world.ConvertToInfinity(PositionIndex);
world.ConvertToFramePos(PositionIndex, position); // 현재 위치를 현재 박스의 로컬 좌표로 전환
Parallel.For(0, camSize.z, (int k) =>
{
Parallel.For(0, camSize.x, (int i) =>
//for(int i = 0; i < camSize.x; i++)
{
finalBoard[i, k].Set(0); //XYZ_b
lposBoard[i, k].Set(0); //XYZ_d
frameBoard[i, k].x = -1;; //XYZ
perspBasisX[i, k].Set(basisX).Mul(perspArray[i, k].x);
perspBasisZ[i, k].Set(basisZ).Mul(perspArray[i, k].z);
XYZ_d delta = deltaArray[i, k].Set(perspBasisX[i, k]).Add(basisY).Add(perspBasisZ[i, k]).Div(300);
XYZ frameIndex = frameInk[i, k].Set(PositionIndex);
XYZ_d target = perspBasisX[i, k]; //new XYZ_d();
XYZ deltaSign = deltaSignBoard[i, k].Set(Math.Sign(delta.x), Math.Sign(delta.y), Math.Sign(delta.z));
XYZ_d maxNumOfDelta = perspBasisZ[i, k].Set(world.frameLength).Mul(deltaSign).Div(delta); // 각 축에 대해 한 칸 이동시 delta요소들이 몇개가 필요한지.
//현위치에서 delta벡터방향으로 이동할 경우 가장 먼저 만나는 경계면 구하기.
target.Set(world.halfFrameLength);
target.Mul(deltaSign); //delta벡터 방향으로 이동시 접촉가능한 경계면들 구하기.
target.Sub(position).Div(delta); //경계면들로부터 현재위치의 거리를 구하고 delta로 나누기. deltasign으로 한번 곱했었기때문에 x,y,z축 서로에 대한 정확한 비교값이 나오게된다.
// 시작 값.
Block block;
int nextDir = 0; // x = 0, y = 1, z = 2
int j = 0;
for (j = 0; j < camSize.y; j++)
{
block = world.Map[frameIndex.x, frameIndex.y, frameIndex.z];//world.GetBlock(frameIndex);
finalBoard[i, k].Add(block.color);
if (frameBoard[i, k].x == -1 && block.touchable)
{
frameBoard[i, k].Set(frameIndex);
target.element[nextDir] -= maxNumOfDelta.element[nextDir];
target.Sub(target.element[nextDir]);
target.element[nextDir] = maxNumOfDelta.element[nextDir];
lposBoard[i, k].Set(maxNumOfDelta).Mul(0.5).Sub(target).Mul(delta);
lposDirectBoard[i, k] = nextDir;
}
//계속 탐색 or 스톱
if (!block.OnRendered(delta, deltaSign, frameIndex, nextDir))
{
break;
}
//다음 위치 탐색(최빈출)
if (target.x < target.y)
{
if (target.x < target.z)
{
nextDir = 0;
}
else
{
nextDir = 2;
}
}
else
if (target.y < target.z)
{
nextDir = 1;
}
else
{
nextDir = 2;
}
target.element[nextDir] += maxNumOfDelta.element[nextDir];
frameIndex.element[nextDir] += deltaSign.element[nextDir];
world.ConvertToInfinity(frameIndex);
//가장가까운 경계면에 해당하는 블록으로 이동.
}
// if (j == camSize.y)finalBoard[i, k].Add(128, 255, 255);
});
});
rayDelta.Set(deltaArray[camPoint.x, camPoint.z]);
}
public void Spin_XZAxis5()
{
position.Set(Position);
cursor.x += (Cursor.Position.X - screenPoint.X) * sensitivity;
cursor.y += (Cursor.Position.Y - screenPoint.Y) * sensitivity;
cursor.x %= 360;
cursor.y %= 360;
cursor.y = cursor.y > 90 ? 90 :
(cursor.y < -90 ? -90 : cursor.y);
Cursor.Position = screenPoint;
double degreeX = cursor.y * -PI;
double degreeY = cursor.x * PI;
double sinX = Math.Sin(degreeX);
double sinY = Math.Sin(degreeY);
double cosX = Math.Cos(degreeX);
double cosY = Math.Cos(degreeY);
bool isTargetSet = false;
basisX.Set(1, 0, 0);
basisY.Set(0, camSize.y - 1, 0);
basisZ.Set(0, 0, 1);
Spin_matrix_x(basisX.x, basisX.y, basisX.z, sinX, cosX, basisX);
Spin_matrix_z(basisX.x, basisX.y, basisX.z, sinY, cosY, basisX);
Spin_matrix_x(basisY.x, basisY.y, basisY.z, sinX, cosX, basisY);
Spin_matrix_z(basisY.x, basisY.y, basisY.z, sinY, cosY, basisY);
Spin_matrix_x(basisZ.x, basisZ.y, basisZ.z, sinX, cosX, basisZ);
Spin_matrix_z(basisZ.x, basisZ.y, basisZ.z, sinY, cosY, basisZ);
world.GetFrameIndex(position, PositionIndex);
// Parallel.For(0,camSize.z,(int k) =>
for (int k = 0; k < camSize.z; k++)
{
//Parallel.For(0,camSize.x,(int i) =>
for (int i = 0; i < camSize.x; i++)
{
XYZ_b color = new XYZ_b();
Block block;
perspBasisX[i, k].Set(basisX).Mul(perspArray[i, k].x);
perspBasisZ[i, k].Set(basisZ).Mul(perspArray[i, k].z);
spinArray[i, k].Set(perspBasisX[i, k]).Add(basisY).Add(perspBasisZ[i, k]);
XYZ_d delta = deltaArray[i, k].Set(spinArray[i, k]).Div(camSize.y);
XYZ_d index = indexArray[i, k].Set(position);
XYZ_d gap = new XYZ_d();
XYZ_d lpos = new XYZ_d();
XYZ frameIndex = new XYZ();
XYZ nextFrameIndexDelta = new XYZ();
XYZ_d target = new XYZ_d();
XYZ_d deltaSign = new XYZ_d();
if (delta.x != 0)
{
deltaSign.x = (Math.Abs(delta.x) / delta.x);
}
if (delta.y != 0)
{
deltaSign.y = (Math.Abs(delta.y) / delta.y);
}
if (delta.z != 0)
{
deltaSign.z = (Math.Abs(delta.z) / delta.z);
}
frameIndex.Set(PositionIndex);
double numOfDelta = 0;
for (int j = 0; j < camSize.y; j++)
{
if (!world.IsInFrame(frameIndex) || j == camSize.y - 1)
{
break;
}
world.ConvertToFramePos(lpos.Set(index), frameIndex); // index를 frameIndex에 해당하는 블록의 로컬포지션으로 변환.
if (world.IsExistPixelInFrame(frameIndex))
{
block = world.GetBlock(frameIndex);
board[i, k] = index;
if (i == camPoint.x && k == camPoint.z && !isTargetSet)
{
deleteFrameIndex.Set(frameIndex);
addFrameIndex.Set(frameIndex).Sub(nextFrameIndexDelta);
isTargetSet = true;
}
XYZ_b inv_color = new XYZ_b(255).Sub(block.color);
if (frameIndex.Equal(deleteFrameIndex))//쳐다보는 블록면 강조
{
XYZ vector = new XYZ(addFrameIndex).Sub(deleteFrameIndex);
if (vector.x != 0 && lpos.x * vector.x > world.frameLength / 2 - 1)
{
viewer.Draw(i, k, inv_color);
break;
}
else if (vector.y != 0 && lpos.y * vector.y > world.frameLength / 2 - 1)
{
viewer.Draw(i, k, inv_color);
break;
}
else if (vector.z != 0 && lpos.z * vector.z > world.frameLength / 2 - 1)
{
viewer.Draw(i, k, inv_color);
break;
}
}
if (gridEnabled && block.code != 14) // 경계선표시.
{
bool Xaxis = Math.Abs(lpos.x) > world.frameLength / 2 - 1; //경계선 테두리 크기 1
bool Yaxis = Math.Abs(lpos.y) > world.frameLength / 2 - 1;
bool Zaxis = Math.Abs(lpos.z) > world.frameLength / 2 - 1;
if (Xaxis && Yaxis)
{
viewer.Draw(i, k, inv_color); break;
}
if (Yaxis && Zaxis)
{
viewer.Draw(i, k, inv_color); break;
}
if (Zaxis && Xaxis)
{
viewer.Draw(i, k, inv_color); break;
}
}
if (block.code == 14) // 거울만나면 반사.
{
color.Set(block.color);
if (nextFrameIndexDelta.x != 0)
{
delta.x = -delta.x;
deltaSign.x = -deltaSign.x;
}
else if (nextFrameIndexDelta.y != 0)
{
delta.y = -delta.y;
deltaSign.y = -deltaSign.y;
}
else if (nextFrameIndexDelta.z != 0)
{
delta.z = -delta.z;
deltaSign.z = -deltaSign.z;
}
frameIndex.Sub(nextFrameIndexDelta); // 일보후퇴
continue;
}
else if (block.code == 15) // 유리만나면 살짝 하얘지고 계속 진행.
{
color.Add(10);
}
else
{
color.Add(block.color);
viewer.Draw(i, k, color);
break;
}
}
//현위치에서 delta벡터방향으로 이동할 경우 가장 먼저 만나는 경계면 구하기.
target.Set(world.frameLength / 2);
target.Mul(deltaSign); //delta벡터 방향으로 이동시 접촉가능한 경계면들 구하기.
target.Sub(lpos).Div(delta); //경계면들로부터 현재위치의 거리를 구하고 delta로 나누기. deltasign으로 한번 곱했었기때문에 x,y,z축 서로에 대한 정확한 비교값이 나오게된다.
nextFrameIndexDelta.Set(0);
if (target.x < target.y && target.x < target.z)
{
numOfDelta = target.x;
nextFrameIndexDelta.x = (int)deltaSign.x;
}
else if (target.y < target.x && target.y < target.z)
{
numOfDelta = target.y;
nextFrameIndexDelta.y = (int)deltaSign.y;
}
else if (target.z < target.x && target.z < target.y)
{
numOfDelta = target.z;
nextFrameIndexDelta.z = (int)deltaSign.z;
}
frameIndex.Add(nextFrameIndexDelta); //가장가까운 경계면에 해당하는 블록으로 이동.
index.Add(gap.Set(delta).Mul(numOfDelta)); //delta방향으로 가장 가까운 경계면으로 이동.
//여기까지 수정
}
}
//);
}
//);
rayDelta.Set(deltaArray[camPoint.x, camPoint.z]);
for (int i = camPoint.z - 3; i < camPoint.z + 3; i++)
{
for (int j = camPoint.x - 3; j < camPoint.x + 3; j++)
{
if (Math.Pow(i - camPoint.z, 2) + Math.Pow(j - camPoint.x, 2) < 8 &&
Math.Pow(i - camPoint.z, 2) + Math.Pow(j - camPoint.x, 2) > 4)
{
viewer.Draw(j, i, new XYZ_b(255));
}
}
}
}
