private void btnAnomaliesChecker_ItemClick(object sender, ItemClickEventArgs e)
{
if (m_trionicFile != null)
{
if (m_trionicFile.Exists())
{
DataTable dtReport = m_trionicFile.CheckForAnomalies();
TuningReport tuningrep = new TuningReport();
tuningrep.ReportTitle = "Anomaly report";
tuningrep.SetDataSource(dtReport);
tuningrep.CreateReport();
tuningrep.ShowReportPreview(defaultLookAndFeel1.LookAndFeel);
}
}
}
private void RunTuningWizard()
{
props = m_trionicFile.GetTrionicProperties();
if ((int)props.TuningStage > 3)
{
frmInfoBox infofail = new frmInfoBox("This file has already been tuned to a higher stage, the tuning wizard will not be started");
return;
}
frmTuningWizard tunWiz = new frmTuningWizard();
int _currStage = (int)props.TuningStage;
if (_currStage == 0) _currStage++;
tunWiz.TuningStage = _currStage;
tunWiz.SetMapSensorType(props.MapSensorType);
tunWiz.SetInjectorType(props.InjectorType);
tunWiz.SetTurboType(props.TurboType);
ECUFileType fileType = m_trionicFile.DetermineFileType();
int frek230 = m_trionicFile.GetSymbolAsInt("Frek_230!");
int frek250 = m_trionicFile.GetSymbolAsInt("Frek_250!");
int knockTime = m_trionicFile.GetSymbolAsInt("Knock_matrix_time!");
tunWiz.SetKnockTime(knockTime);
int rpmLimit = m_trionicFile.GetSymbolAsInt("Rpm_max!");
tunWiz.SetRPMLimiter(rpmLimit);
if (fileType == ECUFileType.Trionic52File)
{
if (frek230 == 728 || frek250 == 935)
{
//dtReport.Rows.Add("APC valve type: Trionic 5");
tunWiz.SetBPCType(BPCType.Trionic5Valve);
}
else
{
tunWiz.SetBPCType(BPCType.Trionic7Valve);
}
}
else if (fileType == ECUFileType.Trionic55File)
{
if (frek230 == 90 || frek250 == 70)
{
tunWiz.SetBPCType(BPCType.Trionic5Valve);
}
else
{
tunWiz.SetBPCType(BPCType.Trionic7Valve);
}
}
if (tunWiz.ShowDialog() == DialogResult.OK)
{
Application.DoEvents();
Trionic5Tuner _tuner = new Trionic5Tuner();
_tuner.AutoUpdateChecksum = m_appSettings.AutoChecksum;
frmInfoBox info;
TuningResult result = TuningResult.TuningFailed;
if (tunWiz.TuningStage == 4)
{
result = _tuner.FreeTuneBinary(m_trionicFile, tunWiz.GetPeakTorque(), tunWiz.GetPeakBoost(), tunWiz.IsTorqueBased, tunWiz.GetMapSensorType(), tunWiz.GetTurboType(), tunWiz.GetInjectorType(), tunWiz.GetBCVType(), tunWiz.GetRPMLimiter(), tunWiz.GetKnockTime());
}
else
{
result = _tuner.TuneFileToStage(tunWiz.TuningStage, m_trionicFile.GetFileInfo().Filename, m_trionicFile, m_trionicFileInformation, true);
}
switch (result)
{
case TuningResult.TuningFailed:
info = new frmInfoBox("Tuning of the binary file failed!");
break;
case TuningResult.TuningFailedAlreadyTuned:
info = new frmInfoBox("Your binary file was already tuned!");
break;
case TuningResult.TuningFailedThreebarSensor:
info = new frmInfoBox("Your binary file was already tuned (3 bar sensor)!");
break;
case TuningResult.TuningSuccess:
// show report
props = m_trionicFile.GetTrionicProperties();
TuningReport tuningrep = new TuningReport();
tuningrep.ReportTitle = "Tuning report (stage " + tunWiz.TuningStage.ToString() + ")";
tuningrep.SetDataSource(_tuner.Resume.ResumeTuning);
tuningrep.CreateReport();
tuningrep.ShowReportPreview(defaultLookAndFeel1.LookAndFeel);
//info = new frmInfoBox("Your binary file was succesfully tuned to stage 1");
break;
case TuningResult.TuningCancelled:
// show report
info = new frmInfoBox("Tuning process cancelled by user");
break;
}
}
}
private void btnTuneToStage3_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
Trionic5Tuner _tuner = new Trionic5Tuner();
_tuner.AutoUpdateChecksum = m_appSettings.AutoChecksum;
frmInfoBox info;
TuningResult result = _tuner.TuneFileToStage(3, m_trionicFile.GetFileInfo().Filename, m_trionicFile, m_trionicFileInformation, false);
switch (result)
{
case TuningResult.TuningFailed:
info = new frmInfoBox("Tuning of the binary file failed!");
break;
case TuningResult.TuningFailedAlreadyTuned:
info = new frmInfoBox("Your binary file was already tuned!");
break;
case TuningResult.TuningFailedThreebarSensor:
info = new frmInfoBox("Your binary file was already tuned (3 bar sensor)!");
break;
case TuningResult.TuningSuccess:
// show report
props = m_trionicFile.GetTrionicProperties();
//info = new frmInfoBox("Your binary file was succesfully tuned to stage 3");
TuningReport tuningrep = new TuningReport();
tuningrep.ReportTitle = "Tuning report (stage III)";
tuningrep.SetDataSource(_tuner.Resume.ResumeTuning);
tuningrep.CreateReport();
tuningrep.ShowReportPreview(defaultLookAndFeel1.LookAndFeel);
break;
case TuningResult.TuningCancelled:
// show report
info = new frmInfoBox("Tuning process cancelled by user");
break;
}
}
private void btnTuneToStageX_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
// tune with user entered parameters, based in injector type, turbo type, fuel type (to come) etc
// create a backup!
// start the parameter screen (user can enter turbo, injector, mapsensor, peak torque and peak power)
// start the freetune wizard
frmFreeTuneSettings tunset = new frmFreeTuneSettings();
props = m_trionicFile.GetTrionicProperties();
tunset.SetMapSensorType(props.MapSensorType);
tunset.SetInjectorType(props.InjectorType);
tunset.SetTurboType(props.TurboType);
ECUFileType fileType = m_trionicFile.DetermineFileType();
int frek230 = m_trionicFile.GetSymbolAsInt("Frek_230!");
int frek250 = m_trionicFile.GetSymbolAsInt("Frek_250!");
int knockTime = m_trionicFile.GetSymbolAsInt("Knock_matrix_time!");
tunset.SetKnockTime(knockTime);
int rpmLimit = m_trionicFile.GetSymbolAsInt("Rpm_max!");
tunset.SetRPMLimiter(rpmLimit);
if (fileType == ECUFileType.Trionic52File)
{
if (frek230 == 728 || frek250 == 935)
{
//dtReport.Rows.Add("APC valve type: Trionic 5");
tunset.SetBPCType(BPCType.Trionic5Valve);
}
else
{
tunset.SetBPCType(BPCType.Trionic7Valve);
}
}
else if (fileType == ECUFileType.Trionic55File)
{
if (frek230 == 90 || frek250 == 70)
{
tunset.SetBPCType(BPCType.Trionic5Valve);
}
else
{
tunset.SetBPCType(BPCType.Trionic7Valve);
}
}
if (tunset.ShowDialog() == DialogResult.OK)
{
Trionic5Tuner _tuner = new Trionic5Tuner();
_tuner.AutoUpdateChecksum = m_appSettings.AutoChecksum;
TuningResult res = _tuner.FreeTuneBinary(m_trionicFile, tunset.GetPeakTorque(), tunset.GetPeakBoost(), tunset.IsTorqueBased, tunset.GetMapSensorType(), tunset.GetTurboType(), tunset.GetInjectorType(), tunset.GetBCVType(), tunset.GetRPMLimiter(), tunset.GetKnockTime());
string text = "Tuning process completed!";
if (res == TuningResult.TuningFailedAlreadyTuned)
{
text = "Tuning process aborted, file is already tuned!";
}
else if (res == TuningResult.TuningFailedThreebarSensor)
{
text = "Tuning process aborted, file was converted to another mapsensor type before!";
}
props = m_trionicFile.GetTrionicProperties();
if (_tuner.Resume == null)
{
}
_tuner.Resume.AddToResumeTable(text);
TuningReport tuningrep = new TuningReport();
tuningrep.ReportTitle = "Tuning report.. stage " + props.TuningStage.ToString();
tuningrep.SetDataSource(_tuner.Resume.ResumeTuning);
tuningrep.CreateReport();
tuningrep.ShowReportPreview(defaultLookAndFeel1.LookAndFeel);
//frmInfoBox info = new frmInfoBox(text);
}
}
private void btnTuneForE85Fuel_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
if (m_trionicFile.Exists())
{
frmE85Wizard e85Wiz = new frmE85Wizard();
if (e85Wiz.ShowDialog() == DialogResult.OK)
{
Application.DoEvents();
if (m_CurrentWorkingProject != "")
{
if (!Directory.Exists(m_appSettings.ProjectFolder + "\\" + m_CurrentWorkingProject + "\\Backups")) Directory.CreateDirectory(m_appSettings.ProjectFolder + "\\" + m_CurrentWorkingProject + "\\Backups");
string filename = m_appSettings.ProjectFolder + "\\" + m_CurrentWorkingProject + "\\Backups\\" + Path.GetFileNameWithoutExtension(GetBinaryForProject(m_CurrentWorkingProject)) + "-backup-" + DateTime.Now.ToString("MMddyyyyHHmmss") + ".BIN";
File.Copy(GetBinaryForProject(m_CurrentWorkingProject), filename);
}
else
{
// create a backup file in the current working folder
string filename = Path.GetDirectoryName(m_trionicFile.GetFileInfo().Filename) + "\\" + Path.GetFileNameWithoutExtension(m_trionicFile.GetFileInfo().Filename) + "-backup-" + DateTime.Now.ToString("MMddyyyyHHmmss") + ".BIN";
File.Copy(m_trionicFile.GetFileInfo().Filename, filename);
}
// do the tune!
Trionic5Tuner _tuner = new Trionic5Tuner();
Trionic5Properties properties = m_trionicFile.GetTrionicProperties();
_tuner.ConvertToE85(m_trionicFile);
TuningReport tuningrep = new TuningReport();
tuningrep.ReportTitle = "Convert to E85 report";
tuningrep.SetDataSource(_tuner.Resume.ResumeTuning);
tuningrep.CreateReport();
tuningrep.ShowReportPreview(defaultLookAndFeel1.LookAndFeel);
//frmInfoBox info = new frmInfoBox("Conversion to E85 fuel done");
}
}
}