internal void UpdateSizeDeltas(StylusPointDescription description, WispLogic stylusLogic)
{
// Query default settings for mouse drag and double tap (with minimum of 1x1 size).
Size mouseDragDefault = new Size(Math.Max(1, SafeSystemMetrics.DragDeltaX / 2),
Math.Max(1, SafeSystemMetrics.DragDeltaY / 2));
Size mouseDoubleTapDefault = new Size(Math.Max(1, SafeSystemMetrics.DoubleClickDeltaX / 2),
Math.Max(1, SafeSystemMetrics.DoubleClickDeltaY / 2));
StylusPointPropertyInfo xProperty = description.GetPropertyInfo(StylusPointProperties.X);
StylusPointPropertyInfo yProperty = description.GetPropertyInfo(StylusPointProperties.Y);
uint dwXValue = GetPropertyValue(xProperty);
uint dwYValue = GetPropertyValue(yProperty);
if (dwXValue != 0 && dwYValue != 0)
{
_cancelSize = new Size((int)Math.Round((ScreenSize.Width * stylusLogic.CancelDelta) / dwXValue),
(int)Math.Round((ScreenSize.Height * stylusLogic.CancelDelta) / dwYValue));
// Make sure we return whole numbers (pixels are whole numbers) and take the maximum
// value between mouse and stylus settings to be safe.
_cancelSize.Width = Math.Max(mouseDragDefault.Width, _cancelSize.Width);
_cancelSize.Height = Math.Max(mouseDragDefault.Height, _cancelSize.Height);
_doubleTapSize = new Size((int)Math.Round((ScreenSize.Width * stylusLogic.DoubleTapDelta) / dwXValue),
(int)Math.Round((ScreenSize.Height * stylusLogic.DoubleTapDelta) / dwYValue));
// Make sure we return whole numbers (pixels are whole numbers) and take the maximum
// value between mouse and stylus settings to be safe.
_doubleTapSize.Width = Math.Max(mouseDoubleTapDefault.Width, _doubleTapSize.Width);
_doubleTapSize.Height = Math.Max(mouseDoubleTapDefault.Height, _doubleTapSize.Height);
}
else
{
// If no info to do the calculation then use the mouse settings for the default.
_doubleTapSize = mouseDoubleTapDefault;
_cancelSize = mouseDragDefault;
}
_forceUpdateSizeDeltas = false;
}
protected static uint GetPropertyValue(StylusPointPropertyInfo propertyInfo)
{
uint dw = DefaultPropertyValue;
switch (propertyInfo.Unit)
{
case StylusPointPropertyUnit.Inches:
if (propertyInfo.Resolution != 0)
{
dw = (uint)(((propertyInfo.Maximum - propertyInfo.Minimum) * 254) / propertyInfo.Resolution);
}
break;
case StylusPointPropertyUnit.Centimeters:
if (propertyInfo.Resolution != 0)
{
dw = (uint)(((propertyInfo.Maximum - propertyInfo.Minimum) * 100) / propertyInfo.Resolution);
}
break;
}
return(dw);
}
/// <summary>
/// Returns true if the two StylusPointDescriptions have the same StylusPointProperties. Metrics are ignored.
/// </summary>
/// <param name="stylusPointDescription1">stylusPointDescription1</param>
/// <param name="stylusPointDescription2">stylusPointDescription2</param>
public static bool AreCompatible(StylusPointDescription stylusPointDescription1, StylusPointDescription stylusPointDescription2)
{
if (stylusPointDescription1 == null || stylusPointDescription2 == null)
{
throw new ArgumentNullException("stylusPointDescription");
}
#pragma warning disable 6506 // if a StylusPointDescription is not null, then _stylusPointPropertyInfos is not null.
//
// ignore X, Y, Pressure - they are guaranteed to be the first3 members
//
Debug.Assert(stylusPointDescription1._stylusPointPropertyInfos.Length >= RequiredCountOfProperties &&
stylusPointDescription1._stylusPointPropertyInfos[0].Id == StylusPointPropertyIds.X &&
stylusPointDescription1._stylusPointPropertyInfos[1].Id == StylusPointPropertyIds.Y &&
stylusPointDescription1._stylusPointPropertyInfos[2].Id == StylusPointPropertyIds.NormalPressure);
Debug.Assert(stylusPointDescription2._stylusPointPropertyInfos.Length >= RequiredCountOfProperties &&
stylusPointDescription2._stylusPointPropertyInfos[0].Id == StylusPointPropertyIds.X &&
stylusPointDescription2._stylusPointPropertyInfos[1].Id == StylusPointPropertyIds.Y &&
stylusPointDescription2._stylusPointPropertyInfos[2].Id == StylusPointPropertyIds.NormalPressure);
if (stylusPointDescription1._stylusPointPropertyInfos.Length != stylusPointDescription2._stylusPointPropertyInfos.Length)
{
return(false);
}
for (int x = RequiredCountOfProperties; x < stylusPointDescription1._stylusPointPropertyInfos.Length; x++)
{
if (!StylusPointPropertyInfo.AreCompatible(stylusPointDescription1._stylusPointPropertyInfos[x], stylusPointDescription2._stylusPointPropertyInfos[x]))
{
return(false);
}
}
#pragma warning restore 6506
return(true);
}
public MetricEntryList (KnownTagCache.KnownTagIndex tag, StylusPointPropertyInfo prop)
{
Tag = tag;
PropertyMetrics = prop;
}
/// <summary>
/// This function checks if this packet property results in a valid metric entry. This will be a valid entry if
/// 1. it is a custom property, 2. Does not belong to the global list of gaMetricEntry_Never, 3. Belongs to the
/// global list of gaMetricEntry_Must and 4. Belongs to global list of gaMetricEntry_Optional and at least one of
/// its metric values is different from the corresponding default.
/// </summary>
/// <param name="propertyInfo"></param>
/// <param name="tag"></param>
/// <param name="metricEntryType"></param>
/// <param name="index"></param>
/// <returns></returns>
static bool IsValidMetricEntry(StylusPointPropertyInfo propertyInfo, KnownTagCache.KnownTagIndex tag, out MetricEntryType metricEntryType, out uint index)
{
index = 0;
// If this is a custom property, check if all the Metric values are null or not. If they are then this is not a
// valid metric entry
if (tag >= (KnownTagCache.KnownTagIndex)KnownIdCache.CustomGuidBaseIndex)
{
metricEntryType = MetricEntryType.Custom;
if( Int32.MinValue == propertyInfo.Minimum &&
Int32.MaxValue == propertyInfo.Maximum &&
StylusPointPropertyUnit.None == propertyInfo.Unit &&
DoubleUtil.AreClose(1.0, propertyInfo.Resolution) )
return false;
else
return true;
}
else
{
int ul;
// First find the property in the gaMetricEntry_Never. If it belongs to this list,
// we will never write the metric table for this prop. So return FALSE;
for( ul = 0; ul < MetricEntry_Never.Length ; ul++ )
{
if( MetricEntry_Never[ul] == tag )
{
metricEntryType = MetricEntryType.Never;
return false;
}
}
// Then search the property in the gaMetricEntry_Must list. If it belongs to this list,
// we must always write the metric table for this prop. So return TRUE;
for( ul = 0; ul<MetricEntry_Must.Length; ul++ )
{
if( MetricEntry_Must[ul] == tag )
{
metricEntryType = MetricEntryType.Must;
if( propertyInfo.Minimum == DefaultPropertyMetrics.Minimum &&
propertyInfo.Maximum == DefaultPropertyMetrics.Maximum &&
propertyInfo.Unit == DefaultPropertyMetrics.Unit &&
DoubleUtil.AreClose(propertyInfo.Resolution, DefaultPropertyMetrics.Resolution ))
return false;
else
return true;
}
}
// Now seach it in the gaMetricEntry_Optional list. If it is there, check the metric values
// agianst the default values and if there is any non default value, return TRUE;
for( ul = 0; ul<MetricEntry_Optional.Length; ul++ )
{
if( ((MetricEntryList)MetricEntry_Optional[ul]).Tag == tag )
{
metricEntryType = MetricEntryType.Optional;
if( propertyInfo.Minimum == MetricEntry_Optional[ul].PropertyMetrics.Minimum &&
propertyInfo.Maximum == MetricEntry_Optional[ul].PropertyMetrics.Maximum &&
propertyInfo.Unit == MetricEntry_Optional[ul].PropertyMetrics.Unit &&
DoubleUtil.AreClose(propertyInfo.Resolution, MetricEntry_Optional[ul].PropertyMetrics.Resolution) )
return false;
else
{
index = (uint)ul;
return true;
}
}
}
// it is not found in any of the list. Force to write all metric entries for the property.
metricEntryType = MetricEntryType.Must;
return true;
}
}
/// <summary>
/// Creates a metric entry based on a PropertyInfo and Tag and returns the Metric Entry Type created
/// </summary>
/// <param name="propertyInfo"></param>
/// <param name="tag"></param>
/// <returns></returns>
public MetricEntryType CreateMetricEntry(StylusPointPropertyInfo propertyInfo, KnownTagCache.KnownTagIndex tag)
{
// First create the default Metric entry based on the property and type of metric entry and then use that to initialize the
// metric entry data.
uint index = 0;
Tag = tag;
MetricEntryType type;
if( IsValidMetricEntry(propertyInfo, Tag, out type, out index) )
{
switch(type)
{
case MetricEntryType.Optional:
{
Initialize(propertyInfo, MetricEntry_Optional[index].PropertyMetrics);
break;
}
case MetricEntryType.Must :
case MetricEntryType.Custom:
Initialize(propertyInfo, DefaultPropertyMetrics);
break;
default:
throw new ArgumentException(StrokeCollectionSerializer.ISFDebugMessage("MetricEntryType was persisted with Never flag which should never happen"));
}
}
return type;
}
/// <summary>
/// Initializes a MetricEntry based on StylusPointPropertyInfo and default StylusPointPropertyInfo for the property
/// </summary>
/// <param name="originalInfo"></param>
/// <param name="defaultInfo"></param>
/// <returns></returns>
public void Initialize(StylusPointPropertyInfo originalInfo, StylusPointPropertyInfo defaultInfo)
{
_size = 0;
using (MemoryStream strm = new MemoryStream(_data))
{
if (!DoubleUtil.AreClose(originalInfo.Resolution, defaultInfo.Resolution))
{
// First min value
_size += SerializationHelper.SignEncode(strm, originalInfo.Minimum);
// Max value
_size += SerializationHelper.SignEncode(strm, originalInfo.Maximum);
// Units
_size += SerializationHelper.Encode(strm, (uint)originalInfo.Unit);
// resolution
using (BinaryWriter bw = new BinaryWriter(strm))
{
bw.Write(originalInfo.Resolution);
_size += 4; // sizeof(float)
}
}
else if (originalInfo.Unit != defaultInfo.Unit)
{
// First min value
_size += SerializationHelper.SignEncode(strm, originalInfo.Minimum);
// Max value
_size += SerializationHelper.SignEncode(strm, originalInfo.Maximum);
// Units
_size += SerializationHelper.Encode(strm, (uint)originalInfo.Unit);
}
else if (originalInfo.Maximum != defaultInfo.Maximum)
{
// First min value
_size += SerializationHelper.SignEncode(strm, originalInfo.Minimum);
// Max value
_size += SerializationHelper.SignEncode(strm, originalInfo.Maximum);
}
else if (originalInfo.Minimum != defaultInfo.Minimum)
{
_size += SerializationHelper.SignEncode(strm, originalInfo.Minimum);
}
}
}
/// <summary>
/// Builds StylusPointDescription based on StrokeDescriptor and Metric Descriptor Block. Sometime Metric Descriptor block may contain
/// metric information for properties which are not part of the stroke descriptor. They are simply ignored.
/// </summary>
/// <param name="strd"></param>
/// <param name="block"></param>
/// <param name="guidList"></param>
/// <returns></returns>
private StylusPointDescription BuildStylusPointDescription(StrokeDescriptor strd, MetricBlock block, GuidList guidList)
{
int cTags = 0;
int packetPropertyCount = 0;
uint buttonCount = 0;
Guid[] buttonguids = null;
System.Collections.Generic.List<KnownTagCache.KnownTagIndex> tags = null;
// if strd is null, it means there is only default descriptor with X & Y
if (null != strd)
{
tags = new System.Collections.Generic.List<KnownTagCache.KnownTagIndex>();
while (cTags < strd.Template.Count)
{
KnownTagCache.KnownTagIndex tag = (KnownTagCache.KnownTagIndex)strd.Template[cTags];
if (KnownTagCache.KnownTagIndex.Buttons == tag)
{
cTags++;
// The next item in the array is no of buttongs.
buttonCount = (uint)strd.Template[cTags];
cTags++;
// Currently we skip the the no of buttons as buttons is not implimented yet
buttonguids = new Guid[buttonCount];
for (uint u = 0; u < buttonCount; u++)
{
Guid guid = guidList.FindGuid(strd.Template[cTags]);
if (guid == Guid.Empty)
{
throw new ArgumentException(StrokeCollectionSerializer.ISFDebugMessage("Button guid tag embedded in ISF stream does not match guid table"),"strd");
}
buttonguids[(int)u] = guid;
cTags++;
}
}
else if (KnownTagCache.KnownTagIndex.StrokePropertyList == tag)
{
break; // since no more Packet properties can be stored
}
else
{
if (KnownTagCache.KnownTagIndex.NoX == tag ||
KnownTagCache.KnownTagIndex.NoY == tag)
{
throw new ArgumentException(StrokeCollectionSerializer.ISFDebugMessage("Invalid ISF with NoX or NoY specified"), "strd");
}
tags.Add(strd.Template[cTags]);
packetPropertyCount++;
cTags++;
}
}
}
List<StylusPointPropertyInfo> stylusPointPropertyInfos = new List<StylusPointPropertyInfo>();
stylusPointPropertyInfos.Add(GetStylusPointPropertyInfo(KnownIds.X, (KnownTagCache.KnownTagIndex)((uint)KnownIdCache.KnownGuidBaseIndex + (uint)KnownIdCache.OriginalISFIdIndex.X), block));
stylusPointPropertyInfos.Add(GetStylusPointPropertyInfo(KnownIds.Y, (KnownTagCache.KnownTagIndex)((uint)KnownIdCache.KnownGuidBaseIndex + (uint)KnownIdCache.OriginalISFIdIndex.Y), block));
stylusPointPropertyInfos.Add(GetStylusPointPropertyInfo(KnownIds.NormalPressure, (KnownTagCache.KnownTagIndex)((uint)KnownIdCache.KnownGuidBaseIndex + (uint)KnownIdCache.OriginalISFIdIndex.NormalPressure), block));
int pressureIndex = -1;
if (tags != null)
{
for (int i = 0; i < tags.Count; i++)
{
Guid guid = guidList.FindGuid(tags[i]);
if (guid == Guid.Empty)
{
throw new ArgumentException(StrokeCollectionSerializer.ISFDebugMessage("Packet Description Property tag embedded in ISF stream does not match guid table"), "strd");
}
if (pressureIndex == -1 && guid == StylusPointPropertyIds.NormalPressure)
{
pressureIndex = i + 2; //x,y have already been accounted for
continue; //we've already added pressure (above)
}
stylusPointPropertyInfos.Add(GetStylusPointPropertyInfo(guid, tags[i], block));
}
if (null != buttonguids)
{
//
// add the buttons to the end of the description if they exist
//
for (int i = 0; i < buttonguids.Length; i++)
{
StylusPointProperty buttonProperty = new StylusPointProperty(buttonguids[i], true);
StylusPointPropertyInfo buttonInfo = new StylusPointPropertyInfo(buttonProperty);
stylusPointPropertyInfos.Add(buttonInfo);
}
}
}
return new StylusPointDescription(stylusPointPropertyInfos, pressureIndex);
}
/// <summary>
/// ToISFReadyArrays - Returns an array of arrays of packet values:
///
/// int[]
/// - int[x,x,x,x,x,x]
/// - int[y,y,y,y,y,y]
/// - int[p,p,p,p,p,p]
///
/// For ISF serialization
///
/// Also returns if any non-default pressures were found or the metric for
/// pressure was non-default
///
/// </summary>
internal void ToISFReadyArrays(out int[][] output, out bool shouldPersistPressure)
{
Debug.Assert(this.Count != 0, "Why are we serializing an empty StylusPointCollection???");
//
// X and Y are in Avalon units, we need to convert to HIMETRIC
//
//
//
int lengthPerPoint = this.Description.GetOutputArrayLengthPerPoint();
if (this.Description.ButtonCount > 0)
{
//don't serialize button data. See Windows OS Bugs 1413460 for details
lengthPerPoint--;
}
output = new int[lengthPerPoint][];
for (int x = 0; x < lengthPerPoint; x++)
{
output[x] = new int[this.Count];
}
//
// we serialize pressure if
// 1) The StylusPointPropertyInfo for pressure is not the default
// 2) There is at least one non-default pressure value in this SPC
//
StylusPointPropertyInfo pressureInfo =
this.Description.GetPropertyInfo(StylusPointPropertyIds.NormalPressure);
shouldPersistPressure =
!StylusPointPropertyInfo.AreCompatible(pressureInfo, StylusPointPropertyInfoDefaults.NormalPressure);
for (int b = 0; b < this.Count; b++)
{
StylusPoint stylusPoint = this[b];
output[0][b] = (int)Math.Round(stylusPoint.X * StrokeCollectionSerializer.AvalonToHimetricMultiplier);
output[1][b] = (int)Math.Round(stylusPoint.Y * StrokeCollectionSerializer.AvalonToHimetricMultiplier);
output[2][b] = stylusPoint.GetPropertyValue(StylusPointProperties.NormalPressure);
//
// it's not necessary to check HasDefaultPressure if
// allDefaultPressures is already set
//
if (!shouldPersistPressure && !stylusPoint.HasDefaultPressure)
{
shouldPersistPressure = true;
}
if (lengthPerPoint > StylusPointDescription.RequiredCountOfProperties)
{
int[] additionalData = stylusPoint.GetAdditionalData();
int countToCopy = lengthPerPoint - StylusPointDescription.RequiredCountOfProperties;/*3*/
Debug.Assert(this.Description.ButtonCount > 0 ?
additionalData.Length - 1 == countToCopy :
additionalData.Length == countToCopy);
for (int y = 0; y < countToCopy; y++)
{
output[y + 3][b] = additionalData[y];
}
}
}
}
private void GetPacketData
(
Stroke stroke,
out MS.Win32.Recognizer.PACKET_DESCRIPTION packetDescription,
out int countOfBytes,
out IntPtr packets,
out NativeMethods.XFORM xForm
)
{
int i;
countOfBytes = 0;
packets = IntPtr.Zero;
packetDescription = new MS.Win32.Recognizer.PACKET_DESCRIPTION();
Matrix matrix = Matrix.Identity;
xForm = new NativeMethods.XFORM((float)(matrix.M11), (float)(matrix.M12), (float)(matrix.M21),
(float)(matrix.M22), (float)(matrix.OffsetX), (float)(matrix.OffsetY));
StylusPointCollection stylusPoints = stroke.StylusPoints;
if (stylusPoints.Count == 0)
{
return; //we'll fail when the calling routine sees that packets is IntPtr.Zer
}
if (stylusPoints.Description.PropertyCount > StylusPointDescription.RequiredCountOfProperties)
{
//
// reformat to X, Y, P
//
StylusPointDescription reformatDescription
= new StylusPointDescription(
new StylusPointPropertyInfo[]{
new StylusPointPropertyInfo(StylusPointProperties.X),
new StylusPointPropertyInfo(StylusPointProperties.Y),
stylusPoints.Description.GetPropertyInfo(StylusPointProperties.NormalPressure)});
stylusPoints = stylusPoints.Reformat(reformatDescription);
}
//
// now make sure we only take a finite amount of data for the stroke
//
if (stylusPoints.Count > MaxStylusPoints)
{
stylusPoints = stylusPoints.Clone(MaxStylusPoints);
}
Guid[] propertyGuids = new Guid[]{ StylusPointPropertyIds.X, //required index for SPD
StylusPointPropertyIds.Y, //required index for SPD
StylusPointPropertyIds.NormalPressure}; //required index for SPD
Debug.Assert(stylusPoints != null);
Debug.Assert(propertyGuids.Length == StylusPointDescription.RequiredCountOfProperties);
// Get the packet description
packetDescription.cbPacketSize = (uint)(propertyGuids.Length * Marshal.SizeOf(typeof(Int32)));
packetDescription.cPacketProperties = (uint)propertyGuids.Length;
//
// use X, Y defaults for metrics, sometimes mouse metrics can be bogus
// always use NormalPressure metrics, though.
//
StylusPointPropertyInfo[] infosToUse = new StylusPointPropertyInfo[StylusPointDescription.RequiredCountOfProperties];
infosToUse[StylusPointDescription.RequiredXIndex] = StylusPointPropertyInfoDefaults.X;
infosToUse[StylusPointDescription.RequiredYIndex] = StylusPointPropertyInfoDefaults.Y;
infosToUse[StylusPointDescription.RequiredPressureIndex] =
stylusPoints.Description.GetPropertyInfo(StylusPointProperties.NormalPressure);
MS.Win32.Recognizer.PACKET_PROPERTY[] packetProperties =
new MS.Win32.Recognizer.PACKET_PROPERTY[packetDescription.cPacketProperties];
StylusPointPropertyInfo propertyInfo;
for ( i = 0; i < packetDescription.cPacketProperties; i++ )
{
packetProperties[i].guid = propertyGuids[i];
propertyInfo = infosToUse[i];
MS.Win32.Recognizer.PROPERTY_METRICS propertyMetrics = new MS.Win32.Recognizer.PROPERTY_METRICS( );
propertyMetrics.nLogicalMin = propertyInfo.Minimum;
propertyMetrics.nLogicalMax = propertyInfo.Maximum;
propertyMetrics.Units = (int)(propertyInfo.Unit);
propertyMetrics.fResolution = propertyInfo.Resolution;
packetProperties[i].PropertyMetrics = propertyMetrics;
}
unsafe
{
int allocationSize = (int)(Marshal.SizeOf(typeof(MS.Win32.Recognizer.PACKET_PROPERTY)) * packetDescription.cPacketProperties);
packetDescription.pPacketProperties = Marshal.AllocCoTaskMem(allocationSize);
MS.Win32.Recognizer.PACKET_PROPERTY* pPacketProperty =
(MS.Win32.Recognizer.PACKET_PROPERTY*)(packetDescription.pPacketProperties.ToPointer());
MS.Win32.Recognizer.PACKET_PROPERTY* pElement = pPacketProperty;
for ( i = 0 ; i < packetDescription.cPacketProperties ; i ++ )
{
Marshal.StructureToPtr(packetProperties[i], new IntPtr(pElement), false);
pElement++;
}
}
// Get packet data
int[] rawPackets = stylusPoints.ToHiMetricArray();
int packetCount = rawPackets.Length;
if (packetCount != 0)
{
countOfBytes = packetCount * Marshal.SizeOf(typeof(Int32));
packets = Marshal.AllocCoTaskMem(countOfBytes);
Marshal.Copy(rawPackets, 0, packets, packetCount);
}
}
/// <summary>
/// Optimization that lets the ctor call setvalue repeatly without causing a copy of the int[]
/// </summary>
/// <param name="stylusPointProperty">stylusPointProperty</param>
/// <param name="value">value</param>
/// <param name="copyBeforeWrite"></param>
internal void SetPropertyValue(StylusPointProperty stylusPointProperty, int value, bool copyBeforeWrite)
{
if (null == stylusPointProperty)
{
throw new ArgumentNullException("stylusPointProperty");
}
if (stylusPointProperty.Id == StylusPointPropertyIds.X)
{
double dVal = (double)value;
//
// only accept values between MaxXY and MinXY
// we don't throw when passed a value outside of that range, we just silently trunctate
//
_x = GetClampedXYValue(dVal);
}
else if (stylusPointProperty.Id == StylusPointPropertyIds.Y)
{
double dVal = (double)value;
//
// only accept values between MaxXY and MinXY
// we don't throw when passed a value outside of that range, we just silently trunctate
//
_y = GetClampedXYValue(dVal);
}
else if (stylusPointProperty.Id == StylusPointPropertyIds.NormalPressure)
{
StylusPointPropertyInfo info =
this.Description.GetPropertyInfo(StylusPointProperties.NormalPressure);
int min = info.Minimum;
int max = info.Maximum;
if (max == 0)
{
_pressureFactor = 0.0f;
}
else
{
_pressureFactor = (float)(Convert.ToSingle(min + value) / Convert.ToSingle(max));
}
}
else
{
int propertyIndex = this.Description.GetPropertyIndex(stylusPointProperty.Id);
if (-1 == propertyIndex)
{
throw new ArgumentException(SR.Get(SRID.InvalidStylusPointProperty), "propertyId");
}
if (stylusPointProperty.IsButton)
{
if (value < 0 || value > 1)
{
throw new ArgumentOutOfRangeException("value", SR.Get(SRID.InvalidMinMaxForButton));
}
if (copyBeforeWrite)
{
CopyAdditionalData();
}
//
// we get button data from a single int in the array
//
int buttonData = _additionalValues[_additionalValues.Length - 1];
int buttonBitPosition = this.Description.GetButtonBitPosition(stylusPointProperty);
int bit = 1 << buttonBitPosition;
if (value == 0)
{
//turn the bit off
buttonData &= ~bit;
}
else
{
//turn the bit on
buttonData |= bit;
}
_additionalValues[_additionalValues.Length - 1] = buttonData;
}
else
{
if (copyBeforeWrite)
{
CopyAdditionalData();
}
_additionalValues[propertyIndex - 3] = value;
}
}
}
private static uint GetPropertyValue(StylusPointPropertyInfo propertyInfo)
{
uint dw = 0;
switch (propertyInfo.Unit)
{
case StylusPointPropertyUnit.Inches:
if (propertyInfo.Resolution != 0)
dw = (uint) (((propertyInfo.Maximum - propertyInfo.Minimum) * 254) / propertyInfo.Resolution);
break;
case StylusPointPropertyUnit.Centimeters:
if (propertyInfo.Resolution != 0)
dw = (uint) (((propertyInfo.Maximum - propertyInfo.Minimum) * 100) / propertyInfo.Resolution);
break;
default:
dw = 1000;
break;
}
return dw;
}
private void InitStylusPointDescription()
{
int cProps;
int cButtons;
int pressureIndex = -1;
// Make sure we are never called on the application thread when we need to talk
// to penimc or else we can cause reentrancy!
Debug.Assert(!_contexts._inputSource.Value.CheckAccess());
// We should always have a valid IPimcContext interface pointer.
Debug.Assert(_pimcContext != null && _pimcContext.Value != null);
_pimcContext.Value.GetPacketDescriptionInfo(out cProps, out cButtons); // Calls Unmanaged code - SecurityCritical with SUC.
List<StylusPointPropertyInfo> propertyInfos = new List<StylusPointPropertyInfo>(cProps + cButtons + 3);
for (int i = 0; i < cProps; i++)
{
Guid guid;
int min, max;
int units;
float res;
_pimcContext.Value.GetPacketPropertyInfo(i, out guid, out min, out max, out units, out res); // Calls Unmanaged code - SecurityCritical with SUC.
if (pressureIndex == -1 && guid == StylusPointPropertyIds.NormalPressure)
{
pressureIndex = i;
}
if (_statusPropertyIndex == -1 && guid == StylusPointPropertyIds.PacketStatus)
{
_statusPropertyIndex = i;
}
StylusPointPropertyInfo propertyInfo = new StylusPointPropertyInfo(new StylusPointProperty(guid, false), min, max, (StylusPointPropertyUnit)units, res);
propertyInfos.Add(propertyInfo);
}
Debug.Assert(_statusPropertyIndex != -1); // We should always see this.
// Make sure we actually created propertyInfos OK
if (propertyInfos != null)
{
for (int i = 0; i < cButtons; i++)
{
Guid buttonGuid;
_pimcContext.Value.GetPacketButtonInfo(i, out buttonGuid); // Calls Unmanaged code - SecurityCritical with SUC.
StylusPointProperty buttonProperty = new StylusPointProperty(buttonGuid, true);
StylusPointPropertyInfo buttonInfo = new StylusPointPropertyInfo(buttonProperty);
propertyInfos.Add(buttonInfo);
}
//validate we can never get X, Y at index != 0, 1
Debug.Assert(propertyInfos[StylusPointDescription.RequiredXIndex /*0*/].Id == StylusPointPropertyIds.X, "X isn't where we expect it! Fix PenImc to ask for X at index 0");
Debug.Assert(propertyInfos[StylusPointDescription.RequiredYIndex /*0*/].Id == StylusPointPropertyIds.Y, "Y isn't where we expect it! Fix PenImc to ask for Y at index 1");
Debug.Assert(pressureIndex == -1 || pressureIndex == StylusPointDescription.RequiredPressureIndex /*2*/,
"Fix PenImc to ask for NormalPressure at index 2!");
if (pressureIndex == -1)
{
//pressure wasn't found. Add it
propertyInfos.Insert(StylusPointDescription.RequiredPressureIndex /*2*/, StylusPointPropertyInfoDefaults.NormalPressure);
}
_infoX = propertyInfos[0];
_infoY = propertyInfos[1];
_stylusPointDescription = new StylusPointDescription(propertyInfos, pressureIndex);
}
}
/// <summary>
/// Internal helper method for comparing compat for two StylusPointPropertyInfos
/// </summary>
internal static bool AreCompatible(StylusPointPropertyInfo stylusPointPropertyInfo1, StylusPointPropertyInfo stylusPointPropertyInfo2)
{
if (stylusPointPropertyInfo1 == null || stylusPointPropertyInfo2 == null)
{
throw new ArgumentNullException("stylusPointPropertyInfo");
}
Debug.Assert((stylusPointPropertyInfo1.Id != StylusPointPropertyIds.X &&
stylusPointPropertyInfo1.Id != StylusPointPropertyIds.Y &&
stylusPointPropertyInfo2.Id != StylusPointPropertyIds.X &&
stylusPointPropertyInfo2.Id != StylusPointPropertyIds.Y),
"Why are you checking X, Y for compatibility? They're always compatible");
//
// we only take ID and IsButton into account, we don't take metrics into account
//
return(stylusPointPropertyInfo1.Id == stylusPointPropertyInfo2.Id &&
stylusPointPropertyInfo1.IsButton == stylusPointPropertyInfo2.IsButton);
}
/// <summary>
/// Adds a new metric entry in the existing list of metric entries
/// </summary>
/// <param name="property"></param>
/// <param name="tag"></param>
/// <returns></returns>
public MetricEntryType AddMetricEntry(StylusPointPropertyInfo property, KnownTagCache.KnownTagIndex tag)
{
// Create a new metric entry based on the packet information passed.
MetricEntry entry = new MetricEntry();
MetricEntryType type = entry.CreateMetricEntry(property, tag);
// Don't add this entry to the global list if size is 0, means default metric values!
if( 0 == entry.Size )
{
return type;
}
MetricEntry start = _Entry;
if( null == start )
{
_Entry = entry;
}
else // tack on data at the end, want to keep x,y at the beginning
{
while(start.Next != null)
{
start = start.Next;
}
start.Next = entry;
}
_Count++;
_size += entry.Size + SerializationHelper.VarSize(entry.Size) + SerializationHelper.VarSize((uint)_Entry.Tag);
return type;
}
private void InitStylusPointDescription()
{
int cProps;
int cButtons;
int pressureIndex = -1;
// Make sure we are never called on the application thread when we need to talk
// to penimc or else we can cause reentrancy!
Debug.Assert(!_contexts._inputSource.Value.CheckAccess());
// We should always have a valid IPimcContext2 interface pointer.
Debug.Assert(_pimcContext != null && _pimcContext.Value != null);
_pimcContext.Value.GetPacketDescriptionInfo(out cProps, out cButtons); // Calls Unmanaged code - SecurityCritical with SUC.
List <StylusPointPropertyInfo> propertyInfos = new List <StylusPointPropertyInfo>(cProps + cButtons + 3);
for (int i = 0; i < cProps; i++)
{
Guid guid;
int min, max;
int units;
float res;
_pimcContext.Value.GetPacketPropertyInfo(i, out guid, out min, out max, out units, out res); // Calls Unmanaged code - SecurityCritical with SUC.
if (pressureIndex == -1 && guid == StylusPointPropertyIds.NormalPressure)
{
pressureIndex = i;
}
if (_statusPropertyIndex == -1 && guid == StylusPointPropertyIds.PacketStatus)
{
_statusPropertyIndex = i;
}
StylusPointPropertyInfo propertyInfo = new StylusPointPropertyInfo(new StylusPointProperty(guid, false), min, max, (StylusPointPropertyUnit)units, res);
propertyInfos.Add(propertyInfo);
}
Debug.Assert(_statusPropertyIndex != -1); // We should always see this.
// Make sure we actually created propertyInfos OK
if (propertyInfos != null)
{
for (int i = 0; i < cButtons; i++)
{
Guid buttonGuid;
_pimcContext.Value.GetPacketButtonInfo(i, out buttonGuid); // Calls Unmanaged code - SecurityCritical with SUC.
StylusPointProperty buttonProperty = new StylusPointProperty(buttonGuid, true);
StylusPointPropertyInfo buttonInfo = new StylusPointPropertyInfo(buttonProperty);
propertyInfos.Add(buttonInfo);
}
//validate we can never get X, Y at index != 0, 1
Debug.Assert(propertyInfos[StylusPointDescription.RequiredXIndex /*0*/].Id == StylusPointPropertyIds.X, "X isn't where we expect it! Fix PenImc to ask for X at index 0");
Debug.Assert(propertyInfos[StylusPointDescription.RequiredYIndex /*0*/].Id == StylusPointPropertyIds.Y, "Y isn't where we expect it! Fix PenImc to ask for Y at index 1");
Debug.Assert(pressureIndex == -1 || pressureIndex == StylusPointDescription.RequiredPressureIndex /*2*/,
"Fix PenImc to ask for NormalPressure at index 2!");
if (pressureIndex == -1)
{
//pressure wasn't found. Add it
propertyInfos.Insert(StylusPointDescription.RequiredPressureIndex /*2*/, StylusPointPropertyInfoDefaults.NormalPressure);
}
_infoX = propertyInfos[0];
_infoY = propertyInfos[1];
_stylusPointDescription = new StylusPointDescription(propertyInfos, pressureIndex);
}
}
/// <summary>
/// Internal helper method for comparing compat for two StylusPointPropertyInfos
/// </summary>
internal static bool AreCompatible(StylusPointPropertyInfo stylusPointPropertyInfo1, StylusPointPropertyInfo stylusPointPropertyInfo2)
{
if (stylusPointPropertyInfo1 == null || stylusPointPropertyInfo2 == null)
{
throw new ArgumentNullException("stylusPointPropertyInfo");
}
Debug.Assert(( stylusPointPropertyInfo1.Id != StylusPointPropertyIds.X &&
stylusPointPropertyInfo1.Id != StylusPointPropertyIds.Y &&
stylusPointPropertyInfo2.Id != StylusPointPropertyIds.X &&
stylusPointPropertyInfo2.Id != StylusPointPropertyIds.Y),
"Why are you checking X, Y for compatibility? They're always compatible");
//
// we only take ID and IsButton into account, we don't take metrics into account
//
return (stylusPointPropertyInfo1.Id == stylusPointPropertyInfo2.Id &&
stylusPointPropertyInfo1.IsButton == stylusPointPropertyInfo2.IsButton);
}