[System.Security.SecurityCritical] // auto-generated
public override unsafe int GetBytes(char* chars, int charCount, byte* bytes, int byteCount, EncoderNLS baseEncoder)
{
// Allow null bytes for counting
Debug.Assert(chars != null, "[ISCIIEncoding.GetBytes]chars!=null");
// Debug.Assert(bytes != null, "[ISCIIEncoding.GetBytes]bytes!=null");
Debug.Assert(charCount >= 0, "[ISCIIEncoding.GetBytes]charCount >=0");
Debug.Assert(byteCount >= 0, "[ISCIIEncoding.GetBytes]byteCount >=0");
// Need the ISCII Encoder
ISCIIEncoder encoder = (ISCIIEncoder)baseEncoder;
// prepare our helpers
EncodingByteBuffer buffer = new EncodingByteBuffer(this, encoder, bytes, byteCount, chars, charCount);
int currentCodePage = _defaultCodePage;
bool bLastVirama = false;
// Use encoder info if available
if (encoder != null)
{
// Remember our old state
currentCodePage = encoder.currentCodePage;
bLastVirama = encoder.bLastVirama;
// If we have a high surrogate left over, then fall it back
if (encoder.charLeftOver > 0)
{
buffer.Fallback(encoder.charLeftOver);
bLastVirama = false; // Redundant
}
}
while (buffer.MoreData)
{
// Get our data
char ch = buffer.GetNextChar();
// See if its a Multi Byte Character
if (ch < MultiByteBegin)
{
// Its a boring low character, add it.
if (!buffer.AddByte((byte)ch))
break;
bLastVirama = false;
continue;
}
// See if its outside of the Indic script Range range
if ((ch < IndicBegin) || (ch > IndicEnd))
{
// See if its a ZWJ or ZWNJ and if we has bLastVirama;
if (bLastVirama && (ch == ZWNJ || ch == ZWJ))
{
// It was a bLastVirama and ZWNJ || ZWJ
if (ch == ZWNJ)
{
if (!buffer.AddByte(Virama))
break;
}
else // ZWJ
{
if (!buffer.AddByte(Nukta))
break;
}
// bLastVirama now counts as false
bLastVirama = false;
continue;
}
// Have to do our fallback
//
// Note that this will fallback 2 chars if this is a high surrogate.
// Throws if recursive (knows because we called InternalGetNextChar)
buffer.Fallback(ch);
bLastVirama = false;
continue;
}
// Its in the Unicode Indic script range
int indicInfo = s_UnicodeToIndicChar[ch - IndicBegin];
byte byteIndic = (byte)indicInfo;
int indicScript = (0x000f & (indicInfo >> 8));
int indicTwoBytes = (0xf000 & indicInfo);
// If IndicInfo is 0 then have to do fallback
if (indicInfo == 0)
{
// Its some Unicode character we don't have indic for.
// Have to do our fallback
// Add Fallback Count
// Note that chars was preincremented, and GetEncoderFallbackString might add an extra
// if chars != charEnd and there's a surrogate.
// Throws if recursive (knows because we called InternalGetNextChar)
buffer.Fallback(ch);
bLastVirama = false;
continue;
}
// See if our code page ("font" in ISCII spec) has to change
// (This if doesn't add character, just changes character set)
Debug.Assert(indicScript != 0, "[ISCIIEncoding.GetBytes]expected an indic script value");
if (indicScript != currentCodePage)
{
// It changed, spit out the ATR
if (!buffer.AddByte(ControlATR, (byte)(indicScript | ControlCodePageStart)))
break;
// Now spit out the new code page (& remember it) (do this afterwards in case AddByte failed)
currentCodePage = indicScript;
// We only know how to map from Unicode to pages from Devanagari to Punjabi (2 to 11)
Debug.Assert(currentCodePage >= CodeDevanagari && currentCodePage <= CodePunjabi,
"[ISCIIEncoding.GetBytes]Code page (" + currentCodePage + " shouldn't appear in ISCII from Unicode table!");
}
// Safe to add our byte now
if (!buffer.AddByte(byteIndic, indicTwoBytes != 0 ? 1 : 0))
break;
// Remember if this one was a Virama
bLastVirama = (byteIndic == Virama);
// Some characters need extra bytes
if (indicTwoBytes != 0)
{
// This one needs another byte
Debug.Assert((indicTwoBytes >> 12) > 0 && (indicTwoBytes >> 12) <= 3,
"[ISCIIEncoding.GetBytes]Expected indicTwoBytes from 1-3, not " + (indicTwoBytes >> 12));
// Already did buffer checking, but...
if (!buffer.AddByte(s_SecondIndicByte[indicTwoBytes >> 12]))
break;
}
}
// May need to switch back to our default code page
if (currentCodePage != _defaultCodePage && (encoder == null || encoder.MustFlush))
{
// It changed, spit out the ATR
if (buffer.AddByte(ControlATR, (byte)(_defaultCodePage | ControlCodePageStart)))
currentCodePage = _defaultCodePage;
else
// If not successful, convert will maintain state for next time, also
// AddByte will have decremented our char count, however we need it to remain the same
buffer.GetNextChar();
bLastVirama = false;
}
// Make sure we remember our state if necessary
// Note that we don't care about flush because Virama and code page
// changes are legal at the end.
// Don't set encoder if we're just counting
if (encoder != null && bytes != null)
{
// Clear Encoder if necessary.
if (!buffer.fallbackBufferHelper.bUsedEncoder)
{
encoder.charLeftOver = (char)0;
}
// Remember our code page/virama state
encoder.currentCodePage = currentCodePage;
encoder.bLastVirama = bLastVirama;
// How many chars were used?
encoder.m_charsUsed = buffer.CharsUsed;
}
// Return our length
return buffer.Count;
}
[System.Security.SecurityCritical] // auto-generated
public override unsafe int GetBytes(char* chars, int charCount,
byte* bytes, int byteCount, EncoderNLS encoder)
{
// Just need to ASSERT, this is called by something else internal that checked parameters already
// We'll allow null bytes as a count
// Debug.Assert(bytes != null, "[GB18030Encoding.GetBytes]bytes is null");
Debug.Assert(byteCount >= 0, "[GB18030Encoding.GetBytes]byteCount is negative");
Debug.Assert(chars != null, "[GB18030Encoding.GetBytes]chars is null");
Debug.Assert(charCount >= 0, "[GB18030Encoding.GetBytes]charCount is negative");
// Assert because we shouldn't be able to have a null encoder.
Debug.Assert(EncoderFallback != null, "[GB18030Encoding.GetBytes]Attempting to use null encoder fallback");
// Get any left over characters
char charLeftOver = (char)0;
if (encoder != null)
charLeftOver = encoder.charLeftOver;
// prepare our helpers
EncodingByteBuffer buffer = new EncodingByteBuffer(this, encoder, bytes, byteCount, chars, charCount);
// Try again if we were MustFlush
TryAgain:
// Go ahead and do it, including the fallback.
while (buffer.MoreData)
{
// Get next char
char ch = buffer.GetNextChar();
// Have to check for charLeftOver
if (charLeftOver != 0)
{
Debug.Assert(Char.IsHighSurrogate(charLeftOver),
"[GB18030Encoding.GetBytes] leftover character should be high surrogate, not 0x" + ((int)charLeftOver).ToString("X4", CultureInfo.InvariantCulture));
// If our next char isn't a low surrogate, then we need to do fallback.
if (!Char.IsLowSurrogate(ch))
{
// No low surrogate, fallback high surrogate & try this one again
buffer.MovePrevious(false); // (Ignoring this character, don't throw)
if (!buffer.Fallback(charLeftOver))
{
charLeftOver = (char)0;
break;
}
charLeftOver = (char)0;
continue;
}
else
{
// Next is a surrogate, add it as surrogate pair
// Need 4 bytes for surrogates
// Get our offset
int offset = ((charLeftOver - 0xd800) << 10) + (ch - 0xdc00);
byte byte4 = (byte)((offset % 0x0a) + 0x30);
offset /= 0x0a;
byte byte3 = (byte)((offset % 0x7e) + 0x81);
offset /= 0x7e;
byte byte2 = (byte)((offset % 0x0a) + 0x30);
offset /= 0x0a;
Debug.Assert(offset < 0x6f,
"[GB18030Encoding.GetBytes](1) Expected offset < 0x6f, not 0x" + offset.ToString("X2", CultureInfo.InvariantCulture));
charLeftOver = (char)0;
if (!buffer.AddByte((byte)(offset + 0x90), byte2, byte3, byte4))
{
// Didn't work, need to back up for both surrogates (AddByte already backed up one)
buffer.MovePrevious(false); // (don't throw)
break;
}
}
charLeftOver = '\0';
}
// ASCII's easiest
else if (ch <= 0x7f)
{
// Need a byte
if (!buffer.AddByte((byte)ch))
break;
}
// See if its a surrogate pair
else if (Char.IsHighSurrogate(ch))
{
// Remember it for next time
charLeftOver = ch;
}
else if (Char.IsLowSurrogate(ch))
{
// Low surrogates should've been found already
if (!buffer.Fallback(ch))
break;
}
else
{
// Not surrogate or ASCII, get value
ushort iBytes = mapUnicodeToBytes[ch];
// See what kind it is
if (Is4Byte(ch))
{
//
// This Unicode character will be converted to four-byte GB18030.
//
// Need 4 bytes
byte byte4 = (byte)((iBytes % 0x0a) + 0x30);
iBytes /= 0x0a;
byte byte3 = (byte)((iBytes % 0x7e) + 0x81);
iBytes /= 0x7e;
byte byte2 = (byte)((iBytes % 0x0a) + 0x30);
iBytes /= 0x0a;
Debug.Assert(iBytes < 0x7e,
"[GB18030Encoding.GetBytes]Expected iBytes < 0x7e, not 0x" + iBytes.ToString("X2", CultureInfo.InvariantCulture));
if (!buffer.AddByte((byte)(iBytes + 0x81), byte2, byte3, byte4))
break;
}
else
{
// Its 2 byte, use it
if (!buffer.AddByte(unchecked((byte)(iBytes >> 8)), unchecked((byte)(iBytes & 0xff))))
break;
}
}
}
// Do we need to flush our charLeftOver?
if ((encoder == null || encoder.MustFlush) && (charLeftOver > 0))
{
// Fall it back
buffer.Fallback(charLeftOver);
charLeftOver = (char)0;
goto TryAgain;
}
// Fallback stuck it in encoder if necessary, but we have to clear MustFlash cases
// (Check bytes != null, don't clear it if we're just counting)
if (encoder != null)
{
// Remember our charLeftOver
if (bytes != null)
encoder.charLeftOver = charLeftOver;
encoder.m_charsUsed = buffer.CharsUsed;
}
// Return our length
return buffer.Count;
}
[System.Security.SecurityCritical] // auto-generated
private unsafe int GetBytesCP50225KR(char* chars, int charCount,
byte* bytes, int byteCount, ISO2022Encoder encoder)
{
// prepare our helpers
EncodingByteBuffer buffer = new EncodingByteBuffer(this, encoder, bytes, byteCount, chars, charCount);
// Get our mode
ISO2022Modes currentMode = ISO2022Modes.ModeASCII; // Mode
ISO2022Modes shiftOutMode = ISO2022Modes.ModeASCII; // ModeKR if already stamped lead bytes
// Check our encoder
if (encoder != null)
{
// May have leftover stuff
char charLeftOver = encoder.charLeftOver;
currentMode = encoder.currentMode;
shiftOutMode = encoder.shiftInOutMode;
// We may have a l left over character from last time, try and process it.
if (charLeftOver > 0)
{
Debug.Assert(Char.IsHighSurrogate(charLeftOver), "[ISO2022Encoding.GetBytesCP50225KR]leftover character should be high surrogate");
// It has to be a high surrogate, which we don't support, so it has to be a fallback
buffer.Fallback(charLeftOver);
}
}
while (buffer.MoreData)
{
// Get our data
char ch = buffer.GetNextChar();
// Get our bytes
ushort iBytes = mapUnicodeToBytes[ch];
// Check for double byte bytes
byte bLeadByte = (byte)(iBytes >> 8);
byte bTrailByte = (byte)(iBytes & 0xff);
if (bLeadByte != 0)
{
//
// It's a double byte character.
//
// If we haven't done our Korean designator, then do so, if we have any input
if (shiftOutMode != ISO2022Modes.ModeKR)
{
// Add our code page designator sequence
if (!buffer.AddByte(ESCAPE, unchecked((byte)'$'), unchecked((byte)')'), unchecked((byte)'C')))
break; // No room during convert.
shiftOutMode = ISO2022Modes.ModeKR;
}
// May have to switch to ModeKR first
if (currentMode != ISO2022Modes.ModeKR)
{
if (!buffer.AddByte(SHIFT_OUT))
break; // No convert room
currentMode = ISO2022Modes.ModeKR;
}
// Add the bytes
if (!buffer.AddByte(bLeadByte, bTrailByte))
break; // no convert room
continue;
}
else if (iBytes != 0 || ch == 0)
{
// Its a single byte character, switch to ASCII if we have to
if (currentMode != ISO2022Modes.ModeASCII)
{
if (!buffer.AddByte(SHIFT_IN))
break;
currentMode = ISO2022Modes.ModeASCII;
}
// Add the ASCII char
if (!buffer.AddByte(bTrailByte))
break;
continue;
}
// Its unknown, do fallback, throws if recursive (knows because we called InternalGetNextChar)
buffer.Fallback(ch);
}
// Switch back to ASCII if MustFlush or no encoder
if (currentMode != ISO2022Modes.ModeASCII &&
(encoder == null || encoder.MustFlush))
{
// Get back to ASCII to be safe. Only do it if it success.
if (buffer.AddByte(SHIFT_IN))
currentMode = ISO2022Modes.ModeASCII;
else
// If not successful, convert will maintain state for next time, also
// AddByte will have decremented our char count, however we need it to remain the same
buffer.GetNextChar();
}
// Remember our encoder state
if (bytes != null && encoder != null)
{
// If we didn't use the encoder, then there's no chars left over
if (!buffer.fallbackBufferHelper.bUsedEncoder)
{
encoder.charLeftOver = (char)0;
}
// This is ASCII if we had to flush
encoder.currentMode = currentMode;
// We don't use shift out mode, but if we've flushed we need to reset it so it doesn't
// get output again.
if (!encoder.MustFlush || encoder.charLeftOver != (char)0)
{
// We should be not flushing or converting
Debug.Assert(!encoder.MustFlush || !encoder.m_throwOnOverflow,
"[ISO2022Encoding.GetBytesCP50225KR]Expected no left over data or not flushing or not converting");
encoder.shiftInOutMode = shiftOutMode;
}
else
encoder.shiftInOutMode = ISO2022Modes.ModeASCII;
encoder.m_charsUsed = buffer.CharsUsed;
}
// Return our length
return buffer.Count;
}
[System.Security.SecurityCritical] // auto-generated
private unsafe int GetBytesCP52936(char* chars, int charCount,
byte* bytes, int byteCount, ISO2022Encoder encoder)
{
// prepare our helpers
EncodingByteBuffer buffer = new EncodingByteBuffer(this, encoder, bytes, byteCount, chars, charCount);
// Mode
ISO2022Modes currentMode = ISO2022Modes.ModeASCII;
// Check our encoder
if (encoder != null)
{
char charLeftOver = encoder.charLeftOver;
currentMode = encoder.currentMode;
// We may have a left over character from last time, try and process it.
if (charLeftOver > 0)
{
Debug.Assert(Char.IsHighSurrogate(charLeftOver), "[ISO2022Encoding.GetBytesCP52936]leftover character should be high surrogate");
// It has to be a high surrogate, which we don't support, so it has to be a fallback
buffer.Fallback(charLeftOver);
}
}
while (buffer.MoreData)
{
// Get our char
char ch = buffer.GetNextChar();
// Get our bytes
ushort sChar = mapUnicodeToBytes[ch];
if (sChar == 0 && ch != 0)
{
// Wasn't a legal byte sequence, its a surrogate or fallback
// Throws if recursive (knows because we called InternalGetNextChar)
buffer.Fallback(ch);
// Done with our char, now process fallback
continue;
}
// Check for halfwidth bytes
byte bLeadByte = (byte)(sChar >> 8);
byte bTrailByte = (byte)(sChar & 0xff);
// If its a double byte, it has to fit in the lead byte 0xa1 - 0xf7, trail byte 0xa1 - 0xfe range
// (including the 0x8080 that our codepage or's to the value)
if ((bLeadByte != 0 &&
(bLeadByte < 0xa1 || bLeadByte > 0xf7 || bTrailByte < 0xa1 || bTrailByte > 0xfe)) ||
(bLeadByte == 0 && bTrailByte > 0x80 && bTrailByte != 0xff))
{
// Illegal character, in 936 code page, but not in HZ subset, get fallback for it
buffer.Fallback(ch);
continue;
}
// sChar is now either ASCII or has an 0x8080 mask
if (bLeadByte != 0)
{
// Its a double byte mode
if (currentMode != ISO2022Modes.ModeHZ)
{
// Need to add the double byte mode marker
if (!buffer.AddByte((byte)'~', (byte)'{', 2))
break; // Stop if no buffer space in convert
currentMode = ISO2022Modes.ModeHZ;
}
// Go ahead and add the 2 bytes
if (!buffer.AddByte(unchecked((byte)(bLeadByte & 0x7f)), unchecked((byte)(bTrailByte & 0x7f))))
break; // Stop if no buffer space in convert
}
else
{
// Its supposed to be ASCII
if (currentMode != ISO2022Modes.ModeASCII)
{
// Need to add the ASCII mode marker
// Will have 1 more byte (or 2 if ~)
if (!buffer.AddByte((byte)'~', (byte)'}', bTrailByte == '~' ? 2 : 1))
break;
currentMode = ISO2022Modes.ModeASCII;
}
// If its a '~' we'll need an extra one
if (bTrailByte == '~')
{
// Need to add the extra ~
if (!buffer.AddByte((byte)'~', 1))
break;
}
// Need to add the character
if (!buffer.AddByte(bTrailByte))
break;
}
}
// Add ASCII shift out if we're at end of decoder
if (currentMode != ISO2022Modes.ModeASCII &&
(encoder == null || encoder.MustFlush))
{
// Need to add the ASCII mode marker
// Only turn off other mode if this works
if (buffer.AddByte((byte)'~', (byte)'}'))
currentMode = ISO2022Modes.ModeASCII;
else
// If not successful, convert will maintain state for next time, also
// AddByte will have decremented our char count, however we need it to remain the same
buffer.GetNextChar();
}
// Need to remember our mode
if (encoder != null && bytes != null)
{
// This is ASCII if we had to flush
encoder.currentMode = currentMode;
if (!buffer.fallbackBufferHelper.bUsedEncoder)
{
encoder.charLeftOver = (char)0;
}
encoder.m_charsUsed = buffer.CharsUsed;
}
// Return our length
return buffer.Count;
}
[System.Security.SecurityCritical] // auto-generated
private unsafe int GetBytesCP5022xJP(char* chars, int charCount,
byte* bytes, int byteCount, ISO2022Encoder encoder)
{
// prepare our helpers
EncodingByteBuffer buffer = new EncodingByteBuffer(this, encoder, bytes, byteCount, chars, charCount);
// Get our mode
ISO2022Modes currentMode = ISO2022Modes.ModeASCII; // Mode
ISO2022Modes shiftInMode = ISO2022Modes.ModeASCII; // Mode that shift in will go back to (only used by CP 50222)
// Check our encoder
if (encoder != null)
{
char charLeftOver = encoder.charLeftOver;
currentMode = encoder.currentMode;
shiftInMode = encoder.shiftInOutMode;
// We may have a left over character from last time, try and process it.
if (charLeftOver > 0)
{
Debug.Assert(Char.IsHighSurrogate(charLeftOver), "[ISO2022Encoding.GetBytesCP5022xJP]leftover character should be high surrogate");
// It has to be a high surrogate, which we don't support, so it has to be a fallback
buffer.Fallback(charLeftOver);
}
}
while (buffer.MoreData)
{
// Get our char
char ch = buffer.GetNextChar();
// Get our bytes
ushort iBytes = mapUnicodeToBytes[ch];
StartConvert:
// Check for halfwidth bytes
byte bLeadByte = (byte)(iBytes >> 8);
byte bTrailByte = (byte)(iBytes & 0xff);
if (bLeadByte == LEADBYTE_HALFWIDTH)
{
// Its Halfwidth Katakana
if (CodePage == 50220)
{
// CodePage 50220 doesn't use halfwidth Katakana, convert to fullwidth
// See if its out of range, fallback if so, throws if recursive fallback
if (bTrailByte < 0x21 || bTrailByte >= 0x21 + s_HalfToFullWidthKanaTable.Length)
{
buffer.Fallback(ch);
continue;
}
// Get the full width katakana char to use.
iBytes = unchecked((ushort)(s_HalfToFullWidthKanaTable[bTrailByte - 0x21] & 0x7F7F));
// May have to do all sorts of fun stuff for mode, go back to start convert
goto StartConvert;
}
// Can use halfwidth Katakana, make sure we're in right mode
// Make sure we're in right mode
if (currentMode != ISO2022Modes.ModeHalfwidthKatakana)
{
// 50222 or 50221, either shift in/out or escape to get to Katakana mode
if (CodePage == 50222)
{
// Shift Out
if (!buffer.AddByte(SHIFT_OUT))
break; // convert out of space, stop
// Don't change modes until after AddByte in case it fails for convert
// We get to shift out to Katakana, make sure we'll go back to the right mode
// (This ends up always being ASCII)
shiftInMode = currentMode;
currentMode = ISO2022Modes.ModeHalfwidthKatakana;
}
else
{
// 50221 does halfwidth katakana by escape sequence
Debug.Assert(CodePage == 50221, "[ISO2022Encoding.GetBytesCP5022xJP]Expected Code Page 50221");
// Add our escape sequence
if (!buffer.AddByte(ESCAPE, unchecked((byte)'('), unchecked((byte)'I')))
break; // convert out of space, stop
currentMode = ISO2022Modes.ModeHalfwidthKatakana;
}
}
// We know we're in Katakana mode now, so add it.
// Go ahead and add the Katakana byte. Our table tail bytes are 0x80 too big.
if (!buffer.AddByte(unchecked((byte)(bTrailByte & 0x7F))))
break; // convert out of space, stop
// Done with this one
continue;
}
else if (bLeadByte != 0)
{
//
// It's a double byte character.
//
// If we're CP 50222 we may have to shift in from Katakana mode first
if (CodePage == 50222 && currentMode == ISO2022Modes.ModeHalfwidthKatakana)
{
// Shift In
if (!buffer.AddByte(SHIFT_IN))
break; // convert out of space, stop
// Need to shift in from katakana. (Still might not be right, but won't be shifted out anyway)
currentMode = shiftInMode;
}
// Make sure we're in the right mode (JIS 0208 or JIS 0212)
// Note: Right now we don't use JIS 0212. Also this table'd be wrong
// Its JIS extension 0208
if (currentMode != ISO2022Modes.ModeJIS0208)
{
// Escape sequence, we can fail after this, mode will be correct for convert
if (!buffer.AddByte(ESCAPE, unchecked((byte)'$'), unchecked((byte)'B')))
break; // Convert out of space, stop
currentMode = ISO2022Modes.ModeJIS0208;
}
// Add our double bytes
if (!buffer.AddByte(unchecked((byte)(bLeadByte)), unchecked((byte)(bTrailByte))))
break; // Convert out of space, stop
continue;
}
else if (iBytes != 0 || ch == 0)
{
// Single byte Char
// If we're CP 50222 we may have to shift in from Katakana mode first
if (CodePage == 50222 && currentMode == ISO2022Modes.ModeHalfwidthKatakana)
{
// Shift IN
if (!buffer.AddByte(SHIFT_IN))
break; // convert ran out of room
// Need to shift in from katakana. (Still might not be right, but won't be shifted out anyway)
currentMode = shiftInMode;
}
// Its a single byte character, switch to ASCII if we have to
if (currentMode != ISO2022Modes.ModeASCII)
{
if (!buffer.AddByte(ESCAPE, unchecked((byte)'('), unchecked((byte)'B')))
break; // convert ran out of room
currentMode = ISO2022Modes.ModeASCII;
}
// Add the ASCII char
if (!buffer.AddByte(bTrailByte))
break; // convert had no room left
continue;
}
// Its unknown, do fallback, throws if recursive (knows because we called InternalGetNextChar)
buffer.Fallback(ch);
}
// Switch back to ASCII if MustFlush or no encoder
if (currentMode != ISO2022Modes.ModeASCII &&
(encoder == null || encoder.MustFlush))
{
// If we're CP 50222 we may have to shift in from Katakana mode first
if (CodePage == 50222 && currentMode == ISO2022Modes.ModeHalfwidthKatakana)
{
// Shift IN, only shift mode if necessary.
if (buffer.AddByte(SHIFT_IN))
// Need to shift in from katakana. (Still might not be right, but won't be shifted out anyway)
currentMode = shiftInMode;
else
// If not successful, convert will maintain state for next time, also
// AddByte will have decremented our char count, however we need it to remain the same
buffer.GetNextChar();
}
// switch back to ASCII to finish neatly
if (currentMode != ISO2022Modes.ModeASCII &&
(CodePage != 50222 || currentMode != ISO2022Modes.ModeHalfwidthKatakana))
{
// only shift if it was successful
if (buffer.AddByte(ESCAPE, unchecked((byte)'('), unchecked((byte)'B')))
currentMode = ISO2022Modes.ModeASCII;
else
// If not successful, convert will maintain state for next time, also
// AddByte will have decremented our char count, however we need it to remain the same
buffer.GetNextChar();
}
}
// Remember our encoder state
if (bytes != null && encoder != null)
{
// This is ASCII if we had to flush
encoder.currentMode = currentMode;
encoder.shiftInOutMode = shiftInMode;
if (!buffer.fallbackBufferHelper.bUsedEncoder)
{
encoder.charLeftOver = (char)0;
}
encoder.m_charsUsed = buffer.CharsUsed;
}
// Return our length
return buffer.Count;
}
