public Class1()
{
engine1 = new Engine();
USStatesCollection usStates = USStatesCollection.CreateDefaultCollection();
CountriesCollection countries = CountriesCollection.CreateDefaultCollection();
this.engine1.SourceListSet.Add("Countries", countries);
this.engine1.SourceListSet.Add("USStates", usStates);
DataTable table = new DataTable();
table.Columns.Add("Id", typeof(string));
table.Columns.Add("Country", typeof(Country));
table.Columns.Add("State", typeof(USState));
// and then add a few rows:
for (int i = 0; i < 50; i++)
{
table.Rows.Add(table.NewRow());
table.Rows[i][0] = i;
table.Rows[i][1] = countries[i % 8];
if (i % 8 == 0)
{
table.Rows[i][2] = usStates[i / 8];
}
}
TableDescriptor mainTd = this.engine1.TableDescriptor;
//mainTd.Fields.ExpandProperties = false;
RelationDescriptor usStatesRd = new RelationDescriptor();
usStatesRd.Name = "State";
usStatesRd.MappingName = "State"; // FieldName in table
usStatesRd.ChildTableName = "USStates"; // SourceListSet name for lookup
usStatesRd.RelationKind = RelationKind.ListItemReference;
usStatesRd.ChildTableDescriptor.SortedColumns.Add("Name");
//usStatesRd.ChildTableDescriptor.AllowEdit = false;
//usStatesRd.ChildTableDescriptor.AllowNew = false; // users can't modify states.
mainTd.Relations.Add(usStatesRd);
RelationDescriptor countriesRd = new RelationDescriptor();
countriesRd.Name = "Country";
countriesRd.MappingName = "Country"; // FieldName in table
countriesRd.ChildTableName = "Countries"; // SourceListSet name for lookup
countriesRd.RelationKind = RelationKind.ListItemReference;
countriesRd.ChildTableDescriptor.AllowEdit = true;
countriesRd.ChildTableDescriptor.AllowNew = true; // allow user to add countries (these setting will be overriden by CountriesCollection.IsReadOnly / CountriesCollection.IsFixedSize properties if they are true).
mainTd.Relations.Add(countriesRd);
this.engine1.SetSourceList(table.DefaultView);
}
public Class1()
{
engine1 = new Engine();
USStatesCollection usStates = USStatesCollection.CreateDefaultCollection();
CountriesCollection countries = CountriesCollection.CreateDefaultCollection();
this.engine1.SourceListSet.Add("Countries", countries);
this.engine1.SourceListSet.Add("USStates", usStates);
DataTable table = new DataTable();
table.Columns.Add("Id", typeof(string));
table.Columns.Add("Country", typeof(string));
table.Columns.Add("State", typeof(string));
// and then add a few rows:
for (int i = 0; i < 50; i++)
{
table.Rows.Add(table.NewRow());
table.Rows[i][0] = i;
table.Rows[i][1] = countries[i % 8].CountryCode;
table.Rows[i][2] = usStates[i % 8].Key;
}
TableDescriptor mainTd = this.engine1.TableDescriptor;
RelationDescriptor usStatesRd = new RelationDescriptor();
usStatesRd.Name = "State";
usStatesRd.RelationKind = RelationKind.ForeignKeyReference;
usStatesRd.ChildTableName = "USStates"; // SourceListSet name for lookup
usStatesRd.RelationKeys.Add("State", "Key");
usStatesRd.ChildTableDescriptor.SortedColumns.Add("Name");
usStatesRd.ChildTableDescriptor.AllowEdit = false;
usStatesRd.ChildTableDescriptor.AllowNew = false; // Make pencil icon disappear, users can't modify states.
mainTd.Relations.Add(usStatesRd);
RelationDescriptor countriesRd = new RelationDescriptor();
//countriesRd.Name = "Country"; - default will be ChildTableName = "Countries"
countriesRd.RelationKind = RelationKind.ForeignKeyReference;
countriesRd.ChildTableName = "Countries"; // SourceListSet name for lookup
countriesRd.RelationKeys.Add("Country", "CountryCode");
countriesRd.ChildTableDescriptor.AllowEdit = true;
countriesRd.ChildTableDescriptor.AllowNew = true; // Make pencil icon appear, allow user to add countries (these setting will be overriden by CountriesCollection.IsReadOnly / CountriesCollection.IsFixedSize properties if they are true).
mainTd.Relations.Add(countriesRd);
this.engine1.SetSourceList(table.DefaultView);
mainTd.Name = "ForeignKeyReference";
}
public void Load()
{
//create an integer collection to hold the random numbers
intCollection = new IntegerCollection();
//create a new grouping engine and assign it a IList datasource
engine = new Engine();
engine.SetSourceList(intCollection);
engine.RecordAsDisplayElements = true;
//get a reference to the underlying grouping Table
theTable = engine.Table;
//group by the Value
engine.TableDescriptor.GroupedColumns.Add("Value");
//add the Summaries that we want
engine.TableDescriptor.Summaries.Add("Int32Agg", "Value", SummaryType.Int32Aggregate);
engine.TableDescriptor.Summaries.Add("Vect", "Value", SummaryType.DoubleVector);
}
public Class1()
{
engine1 = new Engine();
CustomerCollection customers = PopulateCustomers.CreateCustomers();
this.engine1.SetSourceList(customers);
RelationDescriptorCollection relations = new RelationDescriptorCollection();
// First level
RelationDescriptor rd = AddRelation("Level_0", relations);
// Subsequent levels
for (int level = 1; level < 5; level++)
{
rd = AddRelation("Level_" + level.ToString(), rd.ChildTableDescriptor.Relations);
}
this.engine1.TableDescriptor.Relations.InitializeFrom(relations);
this.engine1.Table.ExpandAllRecords();
}
public Class1()
{
engine1 = new Engine();
DataTable parentTable = GetParentTable();
DataTable childTable = GetChildTable();
DataTable grandChildTable = GetGrandChildTable();
// Manually specify relations in grouping engine. The DataSet does not need to have any DataRelations.
// This is the same approach that should be used if you want to set up relation ships
// between independent IList.
RelationDescriptor parentToChildRelationDescriptor = new RelationDescriptor();
parentToChildRelationDescriptor.ChildTableName = "MyChildTable"; // same as SourceListSetEntry.Name for childTable (see below)
parentToChildRelationDescriptor.RelationKind = RelationKind.RelatedMasterDetails;
parentToChildRelationDescriptor.RelationKeys.Add("parentID", "ParentID");
// Add relation to ParentTable
engine1.TableDescriptor.Relations.Add(parentToChildRelationDescriptor);
RelationDescriptor childToGrandChildRelationDescriptor = new RelationDescriptor();
childToGrandChildRelationDescriptor.ChildTableName = "MyGrandChildTable"; // same as SourceListSetEntry.Name for grandChhildTable (see below)
childToGrandChildRelationDescriptor.RelationKind = RelationKind.RelatedMasterDetails;
childToGrandChildRelationDescriptor.RelationKeys.Add("childID", "ChildID");
// Add relation to ChildTable
parentToChildRelationDescriptor.ChildTableDescriptor.Relations.Add(childToGrandChildRelationDescriptor);
// Register any DataTable/IList with SourceListSet, so that RelationDescriptor can resolve the name
this.engine1.SourceListSet.Add("MyParentTable", parentTable);
this.engine1.SourceListSet.Add("MyChildTable", childTable);
this.engine1.SourceListSet.Add("MyGrandChildTable", grandChildTable);
this.engine1.SetSourceList(parentTable.DefaultView);
}
public Class1()
{
InitializeComponent();
bool msdeAvailable = false;
if (msdeAvailable)
{
this.sqlDataAdapter1.Fill(this.dataSet11);
//this.dataSet11.WriteXml("CustOrders.xml", XmlWriteMode.WriteSchema);
}
else
{
// Read from a xml file instead.
ReadXml(this.dataSet11, @"Common\Data\CustOrders.xml");
}
this.engine1 = new Engine();
// Setup a integrated summary
sd0 = new SummaryDescriptor();
sd0.MappingName = "Quantity";
sd0.SummaryType = SummaryType.DoubleAggregate;
this.engine1.TableDescriptor.Summaries.Add(sd0);
// Setup custom summaries
sd1 = new SummaryDescriptor();
sd1.Name = "QuantityTotal";
sd1.MappingName = "Quantity";
sd1.SummaryType = SummaryType.Custom;
sd1.CreateSummaryMethod = new CreateSummaryDelegate(TotalSummary.CreateSummaryMethod);
this.engine1.TableDescriptor.Summaries.Add(sd1);
sd2 = new SummaryDescriptor();
sd2.Name = "QuantityDistinctCount";
sd2.MappingName = "Quantity";
sd2.SummaryType = SummaryType.Custom;
sd2.CreateSummaryMethod = new CreateSummaryDelegate(DistinctInt32CountSummary.CreateSummaryMethod);
this.engine1.TableDescriptor.Summaries.Add(sd2);
sd3 = new SummaryDescriptor();
sd3.Name = "QuantityMedian";
sd3.MappingName = "Quantity";
sd3.SummaryType = SummaryType.Custom;
sd3.CreateSummaryMethod = new CreateSummaryDelegate(StatisticsSummary.CreateSummaryMethod);
this.engine1.TableDescriptor.Summaries.Add(sd3);
// Setup running totals by displaying the value of a custom counter in an unbound field
FieldDescriptor unboundField = new FieldDescriptor("QuantityCount", "", false, "");
unboundField.ReadOnly = false;
this.engine1.TableDescriptor.UnboundFields.Add(unboundField);
this.engine1.TableDescriptor.QueryValue += new FieldValueEventHandler(unboundField_QueryValue); // Routine that queries for the value
this.engine1.TableDescriptor.SaveValue += new FieldValueEventHandler(unboundField_SaveValue);
FieldDescriptor unboundField2 = new FieldDescriptor("QuantityCount2", "", false, "");
this.engine1.TableDescriptor.UnboundFields.Add(unboundField2);
// Setup custom counter
this.engine1.Table.QueryCustomCount += new CustomCountEventHandler(Table_QueryCustomCount);
this.engine1.CurrentRecordContextChange += new CurrentRecordContextChangeEventHandler(engine1_CurrentRecordContextChange);
this.engine1.Table.QueryVisibleCustomCount += new CustomCountEventHandler(Table_QueryVisibleCustomCount);
// Assign data source
this.engine1.SetSourceList(this.dataSet11.Order_Details.DefaultView);
quantityFieldDescriptor = this.engine1.TableDescriptor.Fields["Quantity"];
// Add a filter so that we can check out difference between VisibleCustomCount (only records that meet criteria are counted)
// and CustomCount (all records are counted)
this.engine1.TableDescriptor.RecordFilters.Add("[UnitPrice] > 20");
}