private UserDefinedConversionResult AnalyzeExplicitUserDefinedConversions(
BoundExpression sourceExpression,
TypeSymbol source,
TypeSymbol target,
ref HashSet <DiagnosticInfo> useSiteDiagnostics)
{
Debug.Assert(sourceExpression != null || (object)source != null);
Debug.Assert((object)target != null);
// SPEC: A user-defined explicit conversion from type S to type T is processed
// SPEC: as follows:
// SPEC: Find the set of types D from which user-defined conversion operators
// SPEC: will be considered...
var d = ArrayBuilder <NamedTypeSymbol> .GetInstance();
ComputeUserDefinedExplicitConversionTypeSet(source, target, d, ref useSiteDiagnostics);
// SPEC: Find the set of applicable user-defined and lifted conversion operators, U...
var ubuild = ArrayBuilder <UserDefinedConversionAnalysis> .GetInstance();
ComputeApplicableUserDefinedExplicitConversionSet(sourceExpression, source, target, d, ubuild, ref useSiteDiagnostics);
d.Free();
ImmutableArray <UserDefinedConversionAnalysis> u = ubuild.ToImmutableAndFree();
// SPEC: If U is empty, the conversion is undefined and a compile-time error occurs.
if (u.Length == 0)
{
return(UserDefinedConversionResult.NoApplicableOperators(u));
}
// SPEC: Find the most specific source type SX of the operators in U...
TypeSymbol sx = MostSpecificSourceTypeForExplicitUserDefinedConversion(u, sourceExpression, source, ref useSiteDiagnostics);
if ((object)sx == null)
{
return(UserDefinedConversionResult.NoBestSourceType(u));
}
// SPEC: Find the most specific target type TX of the operators in U...
TypeSymbol tx = MostSpecificTargetTypeForExplicitUserDefinedConversion(u, target, ref useSiteDiagnostics);
if ((object)tx == null)
{
return(UserDefinedConversionResult.NoBestTargetType(u));
}
int?best = MostSpecificConversionOperator(sx, tx, u);
if (best == null)
{
return(UserDefinedConversionResult.Ambiguous(u));
}
return(UserDefinedConversionResult.Valid(u, best.Value));
}
internal Conversion(UserDefinedConversionResult conversionResult, bool isImplicit)
{
_kind = conversionResult.Kind == UserDefinedConversionResultKind.NoApplicableOperators
? ConversionKind.NoConversion
: isImplicit ? ConversionKind.ImplicitUserDefined : ConversionKind.ExplicitUserDefined;
_uncommonData = new UncommonData(
isExtensionMethod: false,
isArrayIndex: false,
conversionResult: conversionResult,
conversionMethod: null,
nestedConversions: default(ImmutableArray <Conversion>));
}
public UncommonData(
bool isExtensionMethod,
bool isArrayIndex,
UserDefinedConversionResult conversionResult,
MethodSymbol conversionMethod,
ImmutableArray <Conversion> nestedConversions)
{
_conversionMethod = conversionMethod;
_conversionResult = conversionResult;
_nestedConversionsOpt = nestedConversions;
_flags = isExtensionMethod ? IsExtensionMethodMask : (byte)0;
if (isArrayIndex)
{
_flags |= IsArrayIndexMask;
}
}
/// <remarks>
/// NOTE: Keep this method in sync with AnalyzeImplicitUserDefinedConversion.
/// </remarks>
protected UserDefinedConversionResult AnalyzeImplicitUserDefinedConversionForV6SwitchGoverningType(TypeSymbol source, ref HashSet <DiagnosticInfo> useSiteDiagnostics)
{
// SPEC: The governing type of a switch statement is established by the switch expression.
// SPEC: 1) If the type of the switch expression is sbyte, byte, short, ushort, int, uint,
// SPEC: long, ulong, bool, char, string, or an enum-type, or if it is the nullable type
// SPEC: corresponding to one of these types, then that is the governing type of the switch statement.
// SPEC: 2) Otherwise, exactly one user-defined implicit conversion (§6.4) must exist from the
// SPEC: type of the switch expression to one of the following possible governing types:
// SPEC: sbyte, byte, short, ushort, int, uint, long, ulong, char, string, or, a nullable type
// SPEC: corresponding to one of those types
// NOTE: This method implements part (2) above, it should be called only if (1) is false for source type.
Debug.Assert((object)source != null);
Debug.Assert(!source.IsValidV6SwitchGoverningType());
// NOTE: For (2) we use an approach similar to native compiler's approach, but call into the common code for analyzing user defined implicit conversions.
// NOTE: (a) Compute the set of types D from which user-defined conversion operators should be considered by considering only the source type.
// NOTE: (b) Instead of computing applicable user defined implicit conversions U from the source type to a specific target type,
// NOTE: we compute these from the source type to ANY target type.
// NOTE: (c) From the conversions in U, select the most specific of them that targets a valid switch governing type
// SPEC VIOLATION: Because we use the same strategy for computing the most specific conversion, as the Dev10 compiler did (in fact
// SPEC VIOLATION: we share the code), we inherit any spec deviances in that analysis. Specifically, the analysis only considers
// SPEC VIOLATION: which conversion has the least amount of lifting, where a conversion may be considered to be in unlifted form,
// SPEC VIOLATION: half-lifted form (only the argument type or return type is lifted) or fully lifted form. The most specific computation
// SPEC VIOLATION: looks for a unique conversion that is least lifted. The spec, on the other hand, requires that the conversion
// SPEC VIOLATION: be *unique*, not merely most use the least amount of lifting among the applicable conversions.
// SPEC VIOLATION: This introduces a SPEC VIOLATION for the following tests in the native compiler:
// NOTE: // See test SwitchTests.CS0166_AggregateTypeWithMultipleImplicitConversions_07
// NOTE: struct Conv
// NOTE: {
// NOTE: public static implicit operator int (Conv C) { return 1; }
// NOTE: public static implicit operator int (Conv? C2) { return 0; }
// NOTE: public static int Main()
// NOTE: {
// NOTE: Conv? D = new Conv();
// NOTE: switch(D)
// NOTE: { ...
// SPEC VIOLATION: Native compiler allows the above code to compile
// SPEC VIOLATION: even though there are two user-defined implicit conversions:
// SPEC VIOLATION: 1) To int type (applicable in normal form): public static implicit operator int (Conv? C2)
// SPEC VIOLATION: 2) To int? type (applicable in lifted form): public static implicit operator int (Conv C)
// NOTE: // See also test SwitchTests.TODO
// NOTE: struct Conv
// NOTE: {
// NOTE: public static implicit operator int? (Conv C) { return 1; }
// NOTE: public static implicit operator string (Conv? C2) { return 0; }
// NOTE: public static int Main()
// NOTE: {
// NOTE: Conv? D = new Conv();
// NOTE: switch(D)
// NOTE: { ...
// SPEC VIOLATION: Native compiler allows the above code to compile too
// SPEC VIOLATION: even though there are two user-defined implicit conversions:
// SPEC VIOLATION: 1) To string type (applicable in normal form): public static implicit operator string (Conv? C2)
// SPEC VIOLATION: 2) To int? type (applicable in half-lifted form): public static implicit operator int? (Conv C)
// SPEC VIOLATION: This occurs because the native compiler compares the applicable conversions to find one with the least amount
// SPEC VIOLATION: of lifting, ignoring whether the return types are the same or not.
// SPEC VIOLATION: We do the same to maintain compatibility with the native compiler.
// (a) Compute the set of types D from which user-defined conversion operators should be considered by considering only the source type.
var d = ArrayBuilder <NamedTypeSymbol> .GetInstance();
ComputeUserDefinedImplicitConversionTypeSet(source, t: null, d: d, useSiteDiagnostics: ref useSiteDiagnostics);
// (b) Instead of computing applicable user defined implicit conversions U from the source type to a specific target type,
// we compute these from the source type to ANY target type. We will filter out those that are valid switch governing
// types later.
var ubuild = ArrayBuilder <UserDefinedConversionAnalysis> .GetInstance();
ComputeApplicableUserDefinedImplicitConversionSet(null, source, target: null, d: d, u: ubuild, useSiteDiagnostics: ref useSiteDiagnostics, allowAnyTarget: true);
d.Free();
ImmutableArray <UserDefinedConversionAnalysis> u = ubuild.ToImmutableAndFree();
// (c) Find that conversion with the least amount of lifting
int?best = MostSpecificConversionOperator(conv => conv.ToType.IsValidV6SwitchGoverningType(isTargetTypeOfUserDefinedOp: true), u);
if (best != null)
{
return(UserDefinedConversionResult.Valid(u, best.Value));
}
return(UserDefinedConversionResult.NoApplicableOperators(u));
}
/// <remarks>
/// NOTE: Keep this method in sync with <see cref="AnalyzeImplicitUserDefinedConversionForV6SwitchGoverningType"/>.
/// </remarks>
private UserDefinedConversionResult AnalyzeImplicitUserDefinedConversions(
BoundExpression sourceExpression,
TypeSymbol source,
TypeSymbol target,
ref HashSet <DiagnosticInfo> useSiteDiagnostics)
{
Debug.Assert(sourceExpression != null || (object)source != null);
Debug.Assert((object)target != null);
// User-defined conversions that involve generics can be quite strange. There
// are two basic problems: first, that generic user-defined conversions can be
// "shadowed" by built-in conversions, and second, that generic user-defined
// conversions can make conversions that would never have been legal user-defined
// conversions if declared non-generically. I call this latter kind of conversion
// a "suspicious" conversion.
//
// The shadowed conversions are easily dealt with:
//
// SPEC: If a predefined implicit conversion exists from a type S to type T,
// SPEC: all user-defined conversions, implicit or explicit, are ignored.
// SPEC: If a predefined explicit conversion exists from a type S to type T,
// SPEC: any user-defined explicit conversion from S to T are ignored.
//
// The rule above can come into play in cases like:
//
// sealed class C<T> { public static implicit operator T(C<T> c) { ... } }
// C<object> c = whatever;
// object o = c;
//
// The built-in implicit conversion from C<object> to object must shadow
// the user-defined implicit conversion.
//
// The caller of this method checks for user-defined conversions *after*
// predefined implicit conversions, so we already know that if we got here,
// there was no predefined implicit conversion.
//
// Note that a user-defined *implicit* conversion may win over a built-in
// *explicit* conversion by the rule given above. That is, if we created
// an implicit conversion from T to C<T>, then the user-defined implicit
// conversion from object to C<object> could be valid, even though that
// would be "replacing" a built-in explicit conversion with a user-defined
// implicit conversion. This is one of the "suspicious" conversions,
// as it would not be legal to declare a user-defined conversion from
// object in a non-generic type.
//
// The way the native compiler handles suspicious conversions involving
// interfaces is neither sensible nor in line with the rules in the
// specification. It is not clear at this time whether we should be exactly
// matching the native compiler, the specification, or neither, in Roslyn.
// Spec (6.4.4 User-defined implicit conversions)
// A user-defined implicit conversion from an expression E to type T is processed as follows:
// SPEC: Find the set of types D from which user-defined conversion operators...
var d = ArrayBuilder <NamedTypeSymbol> .GetInstance();
ComputeUserDefinedImplicitConversionTypeSet(source, target, d, ref useSiteDiagnostics);
// SPEC: Find the set of applicable user-defined and lifted conversion operators, U...
var ubuild = ArrayBuilder <UserDefinedConversionAnalysis> .GetInstance();
ComputeApplicableUserDefinedImplicitConversionSet(sourceExpression, source, target, d, ubuild, ref useSiteDiagnostics);
d.Free();
ImmutableArray <UserDefinedConversionAnalysis> u = ubuild.ToImmutableAndFree();
// SPEC: If U is empty, the conversion is undefined and a compile-time error occurs.
if (u.Length == 0)
{
return(UserDefinedConversionResult.NoApplicableOperators(u));
}
// SPEC: Find the most specific source type SX of the operators in U...
TypeSymbol sx = MostSpecificSourceTypeForImplicitUserDefinedConversion(u, source, ref useSiteDiagnostics);
if ((object)sx == null)
{
return(UserDefinedConversionResult.NoBestSourceType(u));
}
// SPEC: Find the most specific target type TX of the operators in U...
TypeSymbol tx = MostSpecificTargetTypeForImplicitUserDefinedConversion(u, target, ref useSiteDiagnostics);
if ((object)tx == null)
{
return(UserDefinedConversionResult.NoBestTargetType(u));
}
int?best = MostSpecificConversionOperator(sx, tx, u);
if (best == null)
{
return(UserDefinedConversionResult.Ambiguous(u));
}
return(UserDefinedConversionResult.Valid(u, best.Value));
}
