///<summary>This gets the entire set of lines for one perio row for one sequence type. The allowed types are GM, MGJ, and CAL. Each LineSimple is a series of connected lines. But the result could have interruptions, so we return a list, each item in the list being continuous. There may be zero items in the list. Each line in the list is guaranteed to have at least 2 points in it.</summary>
public List<LineSimple> GetHorizontalLines(PerioSequenceType sequenceType,bool isMaxillary,bool isBuccal) {
List<LineSimple> retVal=new List<LineSimple>();
int startTooth=1;
int stopTooth=17;//doesn't perform a loop for 17.
if(!isMaxillary) {
startTooth=32;//We still go Left to Right, even on mand.
stopTooth=16;
}
LineSimple line=new LineSimple();
Vertex3f vertex;
int val1=-1;
int val2=-1;
int val3=-1;
int t=startTooth;
PerioSurf surf1;
PerioSurf surf2;
PerioSurf surf3;
while(t!=stopTooth){
if(!ListToothGraphics[t.ToString()].Visible && !ListToothGraphics[t.ToString()].IsImplant) {
//stop any existing line.
if(line.Vertices.Count==1) {//if there is already one point, then clear it, because a line can't have one point.
line.Vertices.Clear();
}
if(line.Vertices.Count>1) {//if 2 or more points in the line, then add the line to the result.
retVal.Add(line);
line=new LineSimple();//and initialize a new line for future points.
}
//increment to next tooth
if(isMaxillary) {
t++;
}
else {
t--;
}
continue;
}
//We are considering 3 points per tooth. Reinitialize for the new tooth.
val1=-1;
val2=-1;
val3=-1;
surf1=PerioSurf.None;
surf2=PerioSurf.None;
surf3=PerioSurf.None;
for(int i=0;i<ListPerioMeasure.Count;i++) {
if(ListPerioMeasure[i].IntTooth!=t) {
continue;
}
if(ListPerioMeasure[i].SequenceType!=sequenceType) {
continue;
}
//so we are now on the specific PerioMeasure for this sequence and tooth. It contains 6 values, and we will use 3.
PerioMeasure pmGM=null;
//We need to draw MGJ as dist from GM, not CEJ
if(sequenceType==PerioSequenceType.MGJ) {//we only care about this if we are trying to calculate MGJ
for(int m=0;m<ListPerioMeasure.Count;m++) {
if(ListPerioMeasure[m].IntTooth==t
&& ListPerioMeasure[m].SequenceType==PerioSequenceType.GingMargin)
{
pmGM=ListPerioMeasure[m];//get the GM for this same tooth.
break;
}
}
}
if(isBuccal) {
if(ToothGraphic.IsRight(t.ToString())) {
val1=ListPerioMeasure[i].DBvalue;
val2=ListPerioMeasure[i].Bvalue;
val3=ListPerioMeasure[i].MBvalue;
if(sequenceType==PerioSequenceType.MGJ && pmGM!=null) {
if(pmGM.DBvalue!=-1) {
val1+=PerioMeasures.AdjustGMVal(pmGM.DBvalue);
}
if(pmGM.Bvalue!=-1) {
val2+=PerioMeasures.AdjustGMVal(pmGM.Bvalue);
}
if(pmGM.MBvalue!=-1) {
val3+=PerioMeasures.AdjustGMVal(pmGM.MBvalue);
}
}
surf1=PerioSurf.DB;
surf2=PerioSurf.B;
surf3=PerioSurf.MB;
}
else {//for UL and LL
val1=ListPerioMeasure[i].MBvalue;
val2=ListPerioMeasure[i].Bvalue;
val3=ListPerioMeasure[i].DBvalue;
if(sequenceType==PerioSequenceType.MGJ && pmGM!=null) {
if(pmGM.MBvalue!=-1) {
val1+=PerioMeasures.AdjustGMVal(pmGM.MBvalue);
}
if(pmGM.Bvalue!=-1) {
val2+=PerioMeasures.AdjustGMVal(pmGM.Bvalue);
}
if(pmGM.DBvalue!=-1) {
val3+=PerioMeasures.AdjustGMVal(pmGM.DBvalue);
}
}
surf1=PerioSurf.MB;
surf2=PerioSurf.B;
surf3=PerioSurf.DB;
}
}
else {//lingual
if(ToothGraphic.IsRight(t.ToString())) {
val1=ListPerioMeasure[i].DLvalue;
val2=ListPerioMeasure[i].Lvalue;
val3=ListPerioMeasure[i].MLvalue;
if(sequenceType==PerioSequenceType.MGJ && pmGM!=null) {
if(pmGM.DLvalue!=-1) {
val1+=PerioMeasures.AdjustGMVal(pmGM.DLvalue);
}
if(pmGM.Lvalue!=-1) {
val2+=PerioMeasures.AdjustGMVal(pmGM.Lvalue);
}
if(pmGM.MLvalue!=-1) {
val3+=PerioMeasures.AdjustGMVal(pmGM.MLvalue);
}
}
surf1=PerioSurf.DL;
surf2=PerioSurf.L;
surf3=PerioSurf.ML;
}
else {//for UL and LL
val1=ListPerioMeasure[i].MLvalue;
val2=ListPerioMeasure[i].Lvalue;
val3=ListPerioMeasure[i].DLvalue;
if(sequenceType==PerioSequenceType.MGJ && pmGM!=null) {
if(pmGM.MLvalue!=-1) {
val1+=PerioMeasures.AdjustGMVal(pmGM.MLvalue);
}
if(pmGM.Lvalue!=-1) {
val2+=PerioMeasures.AdjustGMVal(pmGM.Lvalue);
}
if(pmGM.DLvalue!=-1) {
val3+=PerioMeasures.AdjustGMVal(pmGM.DLvalue);
}
}
surf1=PerioSurf.ML;
surf2=PerioSurf.L;
surf3=PerioSurf.DL;
}
}
}
//We have now filled our 3 points with values and need to evaluate those values.
//Any or all of the values may still be -1.
if(val1==-1) {
//we won't add a point to this line
if(line.Vertices.Count==1) {//if there is already one point, then clear it, because a line can't have one point.
line.Vertices.Clear();
}
if(line.Vertices.Count>1) {//if 2 or more points in the line, then add the line to the result.
retVal.Add(line);
line=new LineSimple();//and initialize a new line for future points.
}
}
else {//just add a point to the current line.
vertex=new Vertex3f();
vertex.Z=0;//we don't use z
if(isMaxillary) {
//this is safe to run on all sequence types because -1 has already been handled and because other types wouldn't have values > 100.
//Also safe to process on the vals that are MGJ, calculated above, because if they are ever negative,
//it would be an obvious entry error, and the MGJ line would just harmlessly disappear for -1 vals.
vertex.Y=PerioMeasures.AdjustGMVal(val1);
}
else {
vertex.Y=-PerioMeasures.AdjustGMVal(val1);
}
vertex.X=GetXShiftPerioSite(t,surf1)+ToothGraphic.GetDefaultOrthoXpos(t);
line.Vertices.Add(vertex);
}
//val2--------------------------
if(val2==-1) {
if(line.Vertices.Count==1) {
line.Vertices.Clear();
}
if(line.Vertices.Count>1) {
retVal.Add(line);
line=new LineSimple();
}
}
else {
vertex=new Vertex3f();
vertex.Z=0;
if(isMaxillary) {
vertex.Y=PerioMeasures.AdjustGMVal(val2);
}
else {
vertex.Y=-PerioMeasures.AdjustGMVal(val2);
}
vertex.X=GetXShiftPerioSite(t,surf2)+ToothGraphic.GetDefaultOrthoXpos(t);
line.Vertices.Add(vertex);
}
//val3-------------------------
if(val3==-1) {
if(line.Vertices.Count==1) {
line.Vertices.Clear();
}
if(line.Vertices.Count>1) {
retVal.Add(line);
line=new LineSimple();
}
}
else {
vertex=new Vertex3f();
vertex.Z=0;
if(isMaxillary) {
vertex.Y=PerioMeasures.AdjustGMVal(val3);
}
else {
vertex.Y=-PerioMeasures.AdjustGMVal(val3);
}
vertex.X=GetXShiftPerioSite(t,surf3)+ToothGraphic.GetDefaultOrthoXpos(t);
line.Vertices.Add(vertex);
}
//increment to next tooth
if(isMaxillary) {
t++;
}
else {
t--;
}
}
if(line.Vertices.Count>1) {
retVal.Add(line);
}
return retVal;
}
private List <Vector3> LineSimpleToVector3List(LineSimple lineSimple){
List <Vector3> vectorList=new List<Vector3> ();
for(int p=0;p<lineSimple.Vertices.Count;p++){
vectorList.Add(new Vector3(lineSimple.Vertices[p].X,lineSimple.Vertices[p].Y,lineSimple.Vertices[p].Z));
}
return vectorList;
}
///<summary>For any given tooth, there may only be one line in the returned list, or some teeth might have a few lines representing the root canals.</summary>
public List<LineSimple> GetRctLines() {
List<LineSimple> retVal=new List<LineSimple>();
LineSimple line;
if(toothID=="1") {
line=new LineSimple(
-.7f,9.6f,1.6f,
.6f,8,1.6f ,
1.2f,5.8f,1.6f ,
.8f,0,.9f);
retVal.Add(line);
line=new LineSimple(
-1.8f,9.5f,1.6f,
-1.6f,8,1.6f,
-1.6f,5.8f,1.6f,
-.9f,0,.9f);
retVal.Add(line);
}
if(toothID=="16") {
line=new LineSimple(
.7f,9.6f,1.6f,
-.6f,8,1.6f,
-1.2f,5.8f,1.6f,
-.8f,0,.9f);
retVal.Add(line);
line=new LineSimple(
1.8f,9.5f,1.6f ,
1.6f,8,1.6f ,
1.6f,5.8f,1.6f ,
.9f,0,.9f );
retVal.Add(line);
}
if(toothID=="2") {
line=new LineSimple(
.3f,10.6f,3.4f ,
1.4f,8,3.2f ,
1.7f,5,1.9f ,
.9f,0,1f);
retVal.Add(line);
line=new LineSimple(
-1.8f,10.5f,3.4f ,
-2,7,3.2f ,
-1.7f,4,1.9f ,
-1,0,1.1f );
retVal.Add(line);
line=new LineSimple(
-2,11.5f,-3.7f ,
-.6f,6.3f,-4 ,
0,0,-2.3f);
retVal.Add(line);
}
if(toothID=="15") {
line=new LineSimple(
-.3f,10.6f,3.4f ,
-1.4f,8,3.2f ,
-1.7f,5,1.9f ,
-.9f,0,1f );
retVal.Add(line);
line=new LineSimple(
1.8f,10.5f,3.4f ,
2,7,3.2f ,
1.7f,4,1.9f ,
1,0,1.1f);
retVal.Add(line);
line=new LineSimple(
2,11.5f,-3.7f ,
.6f,6.3f,-4 ,
0,0,-2.3f );
retVal.Add(line);
}
if(toothID=="3") {
line=new LineSimple(
1.4f,11.5f,3.4f ,
2.2f,9.4f,3.2f ,
2.4f,6.7f,3.2f ,
1.2f,0,1.1f);
retVal.Add(line);
line=new LineSimple(
-2.7f,11.5f,3.4f ,
-2.9f,9,3.2f ,
-2.6f,5,3.2f ,
-1.2f,0,1.1f );
retVal.Add(line);
line=new LineSimple(
0,12.5f,-4.3f,
0,9.4f,-4.3f ,
0,0,-2.2f );
retVal.Add(line);
}
if(toothID=="14") {
line=new LineSimple(
-1.4f,11.5f,3.4f,
-2.2f,9.4f,3.2f ,
-2.4f,6.7f,3.2f ,
-1.2f,0,1.1f);
retVal.Add(line);
line=new LineSimple(
2.7f,11.5f,3.4f ,
2.9f,9,3.2f ,
2.6f,5,3.2f ,
1.2f,0,1.1f );
retVal.Add(line);
line=new LineSimple(
0,12.5f,-4.3f ,
0,9.4f,-4.3f ,
0,0,-2.2f );
retVal.Add(line);
}
if(toothID=="4") {
line=new LineSimple(
0,13.5f,1.2f ,
-.2f,10,.6f ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="13") {
line=new LineSimple(
0,13.5f,1.2f ,
.2f,10,.6f ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="5") {
line=new LineSimple(
-1.1f,13.5f,1.6f ,
0,6,1.6f ,
0,0,1 );
retVal.Add(line);
}
if(toothID=="12") {
line=new LineSimple(
1.1f,13.5f,1.6f ,
0,6,1.6f ,
0,0,1);
retVal.Add(line);
}
if(toothID=="6") {
line=new LineSimple(
-.4f,16.5f,0 ,
0,11,0 ,
0,0,0);
retVal.Add(line);
}
if(toothID=="11") {
line=new LineSimple(
.4f,16.5f,0 ,
0,11,0,
0,0,0);
retVal.Add(line);
}
if(toothID=="7") {
line=new LineSimple(
-.8f,12.5f,.6f ,
-.3f,10,0 ,
0,0,0);
retVal.Add(line);
}
if(toothID=="10") {
line=new LineSimple(
.8f,12.5f,.6f ,
.3f,10,0 ,
0,0,0);
retVal.Add(line);
}
if(toothID=="8"){
line=new LineSimple(
0,12.6f,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="9") {
line=new LineSimple(
0,12.6f,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="25" || toothID=="26") {
line=new LineSimple(
-.5f,-12,0 ,
-.2f,-9,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="24" || toothID=="23") {
line=new LineSimple(
.5f,-12,0 ,
.2f,-9,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="27") {
line=new LineSimple(
-.5f,-15.5f,0,
-.1f,-13,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="22") {
line=new LineSimple(
.5f,-15.5f,0 ,
.1f,-13,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="28") {
line=new LineSimple(
-.2f,-13.5f,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="21") {
line=new LineSimple(
.2f,-13.5f,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="29") {
line=new LineSimple(
-.3f,-14,0 ,
0,-12,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="20") {
line=new LineSimple(
.3f,-14,0 ,
0,-12,0 ,
0,0,0 );
retVal.Add(line);
}
if(toothID=="30") {
line=new LineSimple(
.9f,-13.5f,0 ,
2.2f,-10,0 ,
2.6f,-7,0 ,
1.7f,0,0);
retVal.Add(line);
line=new LineSimple(
-4.3f,-13.5f,0 ,
-4f,-9,0 ,
-3.3f,-5,0 ,
-1.7f,0,0 );
retVal.Add(line);
}
if(toothID=="19") {
line=new LineSimple(
-.9f,-13.5f,0 ,
-2.2f,-10,0 ,
-2.6f,-7,0 ,
-1.7f,0,0 );
retVal.Add(line);
line=new LineSimple(
4.3f,-13.5f,0 ,
4f,-9,0 ,
3.3f,-5,0 ,
1.7f,0,0 );
retVal.Add(line);
}
if(toothID=="31") {
line=new LineSimple(
0,-12.5f,0 ,
1.8f,-7.5f,0 ,
2.2f,-4,0 ,
1.7f,0,0);
retVal.Add(line);
line=new LineSimple(
-3.4f,-12.5f,0 ,
-3.4f,-8,0 ,
-3f,-5,0 ,
-1.7f,0,0);
retVal.Add(line);
}
if(toothID=="18") {
line=new LineSimple(
0,-12.5f,0 ,
-1.8f,-7.5f,0 ,
-2.2f,-4,0 ,
-1.7f,0,0 );
retVal.Add(line);
line=new LineSimple(
3.4f,-12.5f,0 ,
3.4f,-8,0 ,
3f,-5,0 ,
1.7f,0,0 );
retVal.Add(line);
}
if(toothID=="32") {
line=new LineSimple(
-.7f,-10.5f,0 ,
.8f,-7.5f,0 ,
1.7f,-4,0 ,
1.6f,0,0 );
retVal.Add(line);
line=new LineSimple(
-3.2f,-10.5f,0 ,
-3.4f,-8,0 ,
-3f,-5,0 ,
-1.7f,0,0 );
retVal.Add(line);
}
if(toothID=="17") {
line=new LineSimple(
.7f,-10.5f,0 ,
-.8f,-7.5f,0 ,
-1.7f,-4,0 ,
-1.6f,0,0);
retVal.Add(line);
line=new LineSimple(
3.2f,-10.5f,0 ,
3.4f,-8,0 ,
3f,-5,0 ,
1.7f,0,0);
retVal.Add(line);
}
return retVal;
}
///<summary>This gets the entire set of lines for one perio row for one sequence type. The allowed types are GM, MGJ, and CAL. Each LineSimple is a series of connected lines. But the result could have interruptions, so we return a list, each item in the list being continuous. There may be zero items in the list. Each line in the list is guaranteed to have at least 2 points in it.</summary>
public List<LineSimple> GetHorizontalLines(PerioSequenceType sequenceType,bool isMaxillary,bool isBuccal)
{
List<LineSimple> retVal=new List<LineSimple>();
int startTooth=1;
int stopTooth=17;//doesn't perform a loop for 17.
if(!isMaxillary) {
startTooth=32;//We still go Left to Right, even on mand.
stopTooth=16;
}
LineSimple line=new LineSimple();
Vertex3f vertex;
int val1=-1;
int val2=-1;
int val3=-1;
int t=startTooth;
PerioSurf surf1;
PerioSurf surf2;
PerioSurf surf3;
while(t!=stopTooth){
if(!ListToothGraphics[t.ToString()].Visible && !ListToothGraphics[t.ToString()].IsImplant) {
//stop any existing line.
if(line.Vertices.Count==1) {//if there is already one point, then clear it, because a line can't have one point.
line.Vertices.Clear();
}
if(line.Vertices.Count>1) {//if 2 or more points in the line, then add the line to the result.
retVal.Add(line);
line=new LineSimple();//and initialize a new line for future points.
}
//increment to next tooth
if(isMaxillary) {
t++;
}
else {
t--;
}
continue;
}
//We are considering 3 points per tooth. Reinitialize for the new tooth.
val1=-1;
val2=-1;
val3=-1;
surf1=PerioSurf.None;
surf2=PerioSurf.None;
surf3=PerioSurf.None;
for(int i=0;i<ListPerioMeasure.Count;i++) {
if(ListPerioMeasure[i].IntTooth!=t) {
continue;
}
if(ListPerioMeasure[i].SequenceType!=sequenceType) {
continue;
}
PerioMeasure pmGM=null;
//We need to draw MGJ as dist from GM, not CEJ
if(sequenceType==PerioSequenceType.MGJ) {
for(int m=0;m<ListPerioMeasure.Count;m++) {
if(ListPerioMeasure[m].IntTooth==t
&& ListPerioMeasure[m].SequenceType==PerioSequenceType.GingMargin)
{
pmGM=ListPerioMeasure[m];
break;
}
}
}
if(isBuccal) {
if(ToothGraphic.IsRight(t.ToString())) {
val1=ListPerioMeasure[i].DBvalue;
val2=ListPerioMeasure[i].Bvalue;
val3=ListPerioMeasure[i].MBvalue;
if(sequenceType==PerioSequenceType.MGJ && pmGM!=null) {
if(pmGM.DBvalue!=-1) {
val1+=pmGM.DBvalue;
}
if(pmGM.Bvalue!=-1) {
val2+=pmGM.Bvalue;
}
if(pmGM.MBvalue!=-1) {
val3+=pmGM.MBvalue;
}
}
surf1=PerioSurf.DB;
surf2=PerioSurf.B;
surf3=PerioSurf.MB;
}
else {//for UL and LL
val1=ListPerioMeasure[i].MBvalue;
val2=ListPerioMeasure[i].Bvalue;
val3=ListPerioMeasure[i].DBvalue;
if(sequenceType==PerioSequenceType.MGJ && pmGM!=null) {
if(pmGM.MBvalue!=-1) {
val1+=pmGM.MBvalue;
}
if(pmGM.Bvalue!=-1) {
val2+=pmGM.Bvalue;
}
if(pmGM.DBvalue!=-1) {
val3+=pmGM.DBvalue;
}
}
surf1=PerioSurf.MB;
surf2=PerioSurf.B;
surf3=PerioSurf.DB;
}
}
else {//lingual
if(ToothGraphic.IsRight(t.ToString())) {
val1=ListPerioMeasure[i].DLvalue;
val2=ListPerioMeasure[i].Lvalue;
val3=ListPerioMeasure[i].MLvalue;
if(sequenceType==PerioSequenceType.MGJ && pmGM!=null) {
if(pmGM.DLvalue!=-1) {
val1+=pmGM.DLvalue;
}
if(pmGM.Lvalue!=-1) {
val2+=pmGM.Lvalue;
}
if(pmGM.MLvalue!=-1) {
val3+=pmGM.MLvalue;
}
}
surf1=PerioSurf.DL;
surf2=PerioSurf.L;
surf3=PerioSurf.ML;
}
else {//for UL and LL
val1=ListPerioMeasure[i].MLvalue;
val2=ListPerioMeasure[i].Lvalue;
val3=ListPerioMeasure[i].DLvalue;
if(sequenceType==PerioSequenceType.MGJ && pmGM!=null) {
if(pmGM.MLvalue!=-1) {
val1+=pmGM.MLvalue;
}
if(pmGM.Lvalue!=-1) {
val2+=pmGM.Lvalue;
}
if(pmGM.DLvalue!=-1) {
val3+=pmGM.DLvalue;
}
}
surf1=PerioSurf.ML;
surf2=PerioSurf.L;
surf3=PerioSurf.DL;
}
}
}
//We have now filled our 3 points with values and need to evaluate those values.
//Any or all of the values may still be -1.
if(val1==-1) {
//we won't add a point to this line
if(line.Vertices.Count==1) {//if there is already one point, then clear it, because a line can't have one point.
line.Vertices.Clear();
}
if(line.Vertices.Count>1) {//if 2 or more points in the line, then add the line to the result.
retVal.Add(line);
line=new LineSimple();//and initialize a new line for future points.
}
}
else {//just add a point to the current line.
vertex=new Vertex3f();
vertex.Z=0;//we don't use z
if(isMaxillary) {
vertex.Y=val1;
}
else {
vertex.Y=-val1;
}
vertex.X=GetXShiftPerioSite(t,surf1)+ToothGraphic.GetDefaultOrthoXpos(t);
line.Vertices.Add(vertex);
}
//val2--------------------------
if(val2==-1) {
if(line.Vertices.Count==1) {
line.Vertices.Clear();
}
if(line.Vertices.Count>1) {
retVal.Add(line);
line=new LineSimple();
}
}
else {
vertex=new Vertex3f();
vertex.Z=0;
if(isMaxillary) {
vertex.Y=val2;
}
else {
vertex.Y=-val2;
}
vertex.X=GetXShiftPerioSite(t,surf2)+ToothGraphic.GetDefaultOrthoXpos(t);
line.Vertices.Add(vertex);
}
//val3-------------------------
if(val3==-1) {
if(line.Vertices.Count==1) {
line.Vertices.Clear();
}
if(line.Vertices.Count>1) {
retVal.Add(line);
line=new LineSimple();
}
}
else {
vertex=new Vertex3f();
vertex.Z=0;
if(isMaxillary) {
vertex.Y=val3;
}
else {
vertex.Y=-val3;
}
vertex.X=GetXShiftPerioSite(t,surf3)+ToothGraphic.GetDefaultOrthoXpos(t);
line.Vertices.Add(vertex);
}
//increment to next tooth
if(isMaxillary) {
t++;
}
else {
t--;
}
}
if(line.Vertices.Count>1) {
retVal.Add(line);
}
return retVal;
}