/// <summary>
/// 得到机加工属性数据数据
/// </summary>
/// <param name="costingoutput">成本输出对象</param>
private void getMachiningCostingAnalysisData(HZ_CostingOutput costingoutput, ref HZ_MassProperty massOutput, HZ_StockType stockType, string materialClass, string materialName)
{
// 得到机加工属性
CostAnalysisMachining swCostingMachining = (CostAnalysisMachining)m_swCostingAnalysis.GetSpecificAnalysis();
if (swCostingMachining != null)
{
swCostingMachining.CurrentMaterialClass = materialClass;
swCostingMachining.CurrentMaterial = materialName;
swCostingMachining.CurrentStockType = (int)stockType;
costingoutput.stockType = swCostingMachining.CurrentStockType;
costingoutput.currentMaterial = swCostingMachining.CurrentMaterial;
costingoutput.currentMaterialClass = swCostingMachining.CurrentMaterialClass;
//costingoutput.currentPlateThickness = swCostingMachining.CurrentPlateThickness;
}
}
/// <summary>
/// 得到质量属性
/// <param name="trademark">材料牌号</param>
/// <param name="costingoutput">成本输出对象</param>
/// </summary>
private void getMass(string trademark, ref HZ_MassProperty costingoutput)
{
if (m_ModelDoc != null)
{
MassProperty mp = m_ModelDoc.Extension.CreateMassProperty();
mp.UseSystemUnits = true;
// 获取名称
costingoutput.name = m_ModelDoc.GetTitle();
// 获取材料牌号-没什么用
costingoutput.material = trademark;
// 获取重量
costingoutput.mass = mp.Mass.ToString();
// 获取密度
costingoutput.density = mp.Density.ToString();
// 获取表面积
costingoutput.surface = mp.SurfaceArea.ToString();
// 获取体积
costingoutput.volume = mp.Volume.ToString();
}
}
/// <summary>
/// 得到尺寸属性
/// </summary>
/// <param name="costingoutput">成本输出对象</param>
private void getBox(ref HZ_MassProperty costingoutput)
{
if (m_ModelDoc != null)
{
object boxobj = new object();
PartDoc swPartDoc = (PartDoc)m_ModelDoc;
if (swPartDoc != null)
{
boxobj = swPartDoc.GetPartBox(true);
if (boxobj != null)
{
double[] BoxFaceDblArray = new double[7];
BoxFaceDblArray = (double[])boxobj;
// 成本输出对象赋值
costingoutput.x = (BoxFaceDblArray[3] - BoxFaceDblArray[0]).ToString();
costingoutput.y = (BoxFaceDblArray[4] - BoxFaceDblArray[1]).ToString();
costingoutput.z = (BoxFaceDblArray[5] - BoxFaceDblArray[2]).ToString();
costingoutput.box = (BoxFaceDblArray[5] - BoxFaceDblArray[2]).ToString();
}
}
}
}
private void button3_Click(object sender, EventArgs e)
{
HZ_EnumType type = HZ_EnumType.hz_SimpleTurning; //工艺
int lotSize = 100; //批量大小
int totalNum = 100; //零件总个数
string materialClass = ""; //材料类型
string materialName = ""; //材料名称
HZ_StockType stocktype = HZ_StockType.Block; //配料类型
//Solidworks程序对象
m_SwApp = (SldWorks)Activator.CreateInstance(Type.GetTypeFromProgID("SldWorks.Application"));
//打开文件
m_ModelDoc = openModle(partfilepath);
//生成缩略图
// ModelView LoMyModelView; //生成缩略图
//LoMyModelView = m_ModelDoc.ActiveView;
//LoMyModelView.FrameState = (int)swWindowState_e.swWindowMaximized;
////m_ModelDoc.ShowNamedView2("*Isometric", 7);
//m_ModelDoc.ViewZoomtofit2();
//m_ModelDoc.SaveAs(Application.StartupPath + "\\test.jpg");
//m_ModelDoc.SaveAs(Application.StartupPath + "\\test.stl");
//仅支持零部件
if (m_ModelDoc.GetType() != (int)swDocumentTypes_e.swDocPART)
{
MessageBox.Show("仅支持零部件！");
return;
}
bool isSheetMetal = false;
bool isSolidBody = false;
bool isBlank = false;
string strError = string.Empty;
//仅支持单实体零部件
if (isMutiBodyOrSheetMetal(ref isBlank, ref isSheetMetal, ref isSolidBody, ref strError))
{
MessageBox.Show("仅支持单体零部件！");
return;
}
//空白图纸
if (isBlank)
{
MessageBox.Show("空白图纸！");
return;
}
//不支持钣金件
if (isSheetMetal)
{
MessageBox.Show("不支持钣金件！");
return;
}
//是否为实体零件
if (!isSolidBody)
{
MessageBox.Show("非实体零部件！");
return;
}
//获取SolidWorks扩展器
ModelDocExtension swModelDocExt = m_ModelDoc.Extension;
// 初始化成本输出对象
HZ_CostingOutput CostingOutput = new HZ_CostingOutput();
//详细输出对象
HZ_MassProperty massOutput = new HZ_MassProperty();
// 得到质量属性 Part Mass
getMass("", ref massOutput);
// 得到外形尺寸属性
getBox(ref massOutput);
swCosting = (CostManager)swModelDocExt.GetCostingManager();
swCosting.WaitForUIUpdate();
// 得到 Costing part
object swCostingModel = (object)swCosting.CostingModel;
swCostingPart = (CostPart)swCostingModel;
//设置默认模块参数
//模板，批量大小，零件总个数，材料类型，材料名称，计算方式，配料类型
swcCostingDefaults = (CostingDefaults)swCosting.CostingDefaults;
swcCostingDefaults.SetTemplateName((int)swcCostingType_e.swcCostingType_Machining, selectCostingTemp(type));
//单体零件
swcCostingDefaults.LotSizeForSingleBody = lotSize;
swcCostingDefaults.TotalNumberOfPartsForSingleBody = totalNum;
//多实体文件
swcCostingDefaults.LotSizeForMultibody = lotSize;
swcCostingDefaults.TotalNumberOfPartsForMultibody = totalNum;
//设置材料以及材料处理方式
swcCostingDefaults.SetMaterialClass((int)swcMethodType_e.swcMethodType_Machining, materialClass);
swcCostingDefaults.SetMaterialName((int)swcMethodType_e.swcMethodType_Machining, materialName);
swcCostingDefaults.SetManufacturingMethod((int)swcBodyType_e.swcBodyType_Machined, (int)swcBodyType_e.swcBodyType_Machined);
swcCostingDefaults.MachiningStockBodyType = (int)stocktype;
//获取Cost Body
swCostingBody = swCostingPart.SetCostingMethod("", (int)swcMethodType_e.swcMethodType_Machining);
if (swCostingBody == null)
{
MessageBox.Show("制造成本计算失败");
return;
}
// 创建 common Costing analysis
m_swCostingAnalysis = swCostingBody.CreateCostAnalysis(selectCostingTemp(type));
m_swCostingAnalysis = swCostingBody.GetCostAnalysis();
m_swCostingAnalysis.TotalQuantity = totalNum;
m_swCostingAnalysis.LotSize = lotSize;
CostFeature swCostingFeat = default(CostFeature);
CostFeature swCostingNextFeat = default(CostFeature);
CostFeature swCostingSubFeat = default(CostFeature);
CostFeature swCostingNextSubFeat = default(CostFeature);
swCostingFeat = (CostFeature)m_swCostingAnalysis.GetFirstCostFeature();
while ((swCostingFeat != null))
{
// swcCostFeatureType_e.
Debug.Print(" Feature: " + swCostingFeat.Name);
Debug.Print(" Type: " + swCostingFeat.GetType());
Debug.Print(" Setup related: " + swCostingFeat.IsSetup);
Debug.Print(" Overridden: " + swCostingFeat.IsOverridden);
Debug.Print(" Combined cost: " + swCostingFeat.CombinedCost);
Debug.Print(" Combined time: " + swCostingFeat.CombinedTime);
swCostingSubFeat = swCostingFeat.GetFirstSubFeature();
while ((swCostingSubFeat != null))
{
Debug.Print(" Subfeature: " + swCostingSubFeat.Name);
Debug.Print(" Type: " + swCostingSubFeat.GetType());
Debug.Print(" Setup related: " + swCostingSubFeat.IsSetup);
Debug.Print(" Overridden: " + swCostingSubFeat.IsOverridden);
Debug.Print(" Combined cost: " + swCostingSubFeat.CombinedCost);
Debug.Print(" Combined time: " + swCostingSubFeat.CombinedTime);
swCostingNextSubFeat = (CostFeature)swCostingSubFeat.GetNextFeature();
swCostingSubFeat = null;
swCostingSubFeat = (CostFeature)swCostingNextSubFeat;
swCostingNextSubFeat = null;
}
swCostingNextFeat = swCostingFeat.GetNextFeature();
swCostingFeat = null;
swCostingFeat = (CostFeature)swCostingNextFeat;
swCostingNextFeat = null;
}
}
private void button1_Click(object sender, EventArgs e)
{
DateTime dt1 = DateTime.Now;
HZ_EnumType type = HZ_EnumType.hz_SimpleTurning; //工艺
int lotSize = 100; //批量大小
int totalNum = 100; //零件总个数
string materialClass = ""; //材料类型
string materialName = ""; //材料名称
HZ_StockType stocktype = HZ_StockType.Block; //配料类型
//Solidworks程序对象
m_SwApp = (SldWorks)Activator.CreateInstance(Type.GetTypeFromProgID("SldWorks.Application"));
//打开文件
m_ModelDoc = openModle(partfilepath);
//生成缩略图
// ModelView LoMyModelView; //生成缩略图
//LoMyModelView = m_ModelDoc.ActiveView;
//LoMyModelView.FrameState = (int)swWindowState_e.swWindowMaximized;
////m_ModelDoc.ShowNamedView2("*Isometric", 7);
//m_ModelDoc.ViewZoomtofit2();
//m_ModelDoc.SaveAs(Application.StartupPath + "\\test.jpg");
//m_ModelDoc.SaveAs(Application.StartupPath + "\\test.stl");
//仅支持零部件
if (m_ModelDoc.GetType() != (int)swDocumentTypes_e.swDocPART)
{
MessageBox.Show("仅支持零部件！");
return;
}
bool isSheetMetal = false;
bool isSolidBody = false;
bool isBlank = false;
string strError = string.Empty;
//仅支持单实体零部件
if (isMutiBodyOrSheetMetal(ref isBlank, ref isSheetMetal, ref isSolidBody, ref strError))
{
MessageBox.Show("仅支持单体零部件！");
return;
}
//空白图纸
if (isBlank)
{
MessageBox.Show("空白图纸！");
return;
}
//不支持钣金件
if (isSheetMetal)
{
MessageBox.Show("不支持钣金件！");
return;
}
//是否为实体零件
if (!isSolidBody)
{
MessageBox.Show("非实体零部件！");
return;
}
//获取SolidWorks扩展器
ModelDocExtension swModelDocExt = m_ModelDoc.Extension;
// 初始化成本输出对象
HZ_CostingOutput CostingOutput = new HZ_CostingOutput();
//详细输出对象
HZ_MassProperty massOutput = new HZ_MassProperty();
// 得到质量属性 Part Mass
getMass("", ref massOutput);
// 得到外形尺寸属性
getBox(ref massOutput);
swCosting = (CostManager)swModelDocExt.GetCostingManager();
swCosting.WaitForUIUpdate();
// 得到 Costing part
object swCostingModel = (object)swCosting.CostingModel;
swCostingPart = (CostPart)swCostingModel;
//设置默认模块参数
//模板，批量大小，零件总个数，材料类型，材料名称，计算方式，配料类型
swcCostingDefaults = (CostingDefaults)swCosting.CostingDefaults;
swcCostingDefaults.SetTemplateName((int)swcCostingType_e.swcCostingType_Machining, selectCostingTemp(type));
//单体零件
swcCostingDefaults.LotSizeForSingleBody = lotSize;
swcCostingDefaults.TotalNumberOfPartsForSingleBody = totalNum;
//多实体文件
swcCostingDefaults.LotSizeForMultibody = lotSize;
swcCostingDefaults.TotalNumberOfPartsForMultibody = totalNum;
//设置材料以及材料处理方式
swcCostingDefaults.SetMaterialClass((int)swcMethodType_e.swcMethodType_Machining, materialClass);
swcCostingDefaults.SetMaterialName((int)swcMethodType_e.swcMethodType_Machining, materialName);
swcCostingDefaults.SetManufacturingMethod((int)swcBodyType_e.swcBodyType_Machined, (int)swcBodyType_e.swcBodyType_Machined);
swcCostingDefaults.MachiningStockBodyType = (int)stocktype;
//获取Cost Body
swCostingBody = swCostingPart.SetCostingMethod("", (int)swcMethodType_e.swcMethodType_Machining);
if (swCostingBody == null)
{
MessageBox.Show("制造成本计算失败");
return;
}
// 创建 common Costing analysis
m_swCostingAnalysis = swCostingBody.CreateCostAnalysis(selectCostingTemp(type));
m_swCostingAnalysis = swCostingBody.GetCostAnalysis();
m_swCostingAnalysis.TotalQuantity = totalNum;
m_swCostingAnalysis.LotSize = lotSize;
// 得到 Costing bodies
int nbrCostingBodies = swCostingPart.GetBodyCount();
if (hasBody(nbrCostingBodies, swCostingPart, type))
{
// 得到 machining Costing Analysis 数据
getMachiningCostingAnalysisData(CostingOutput, ref massOutput, stocktype, materialClass, materialName);
//得到返回的质量属性
CostingOutput.massProperty = massOutput;
// 得到 common Costing analysis 数据
getCommonCostingAnalysisData(CostingOutput, totalNum, lotSize);
//孔超标数据，标准 > 5 直接剔除，并+2 元，处理倒角导致成本超高的问题
getCostingFeatures(ref CostingOutput);
}
DateTime dt2 = DateTime.Now;
TimeSpan dt3 = dt2 - dt1;
int goTime = dt3.Seconds;
MessageBox.Show(goTime.ToString() + "秒");
}