/// <summary>
/// Used to generate a ring of vertices with the uvMapping appropriate for a cylinder wall (increments in +x)
/// </summary>
/// <param name="offset"></param>
/// <param name="faces"></param>
/// <param name="radius"></param>
/// <param name="height"></param>
/// <param name="startAngle"></param>
/// <param name="endAngle"></param>
/// <param name="v"></param>
/// <param name="area"></param>
/// <param name="yCos"></param>
/// <param name="ySin"></param>
/// <returns></returns>
public List<Vertex> generateRadialVerticesFlatUVs(Vector3 offset, int faces, float radius, float height, float startAngle, float endAngle, float v, UVArea area, float yCos, float ySin)
{
List<Vertex> verts = new List<Vertex>();
float startRad = startAngle * Mathf.Deg2Rad;
float endRad = endAngle * Mathf.Deg2Rad;
float totalRad = endRad - startRad;
float radPerFace = (float)((2.0 * Math.PI) / faces);
float radPerSub = radPerFace / subdivision;
int numOfFaces = (int)Math.Round(totalRad / radPerFace, 0);
float rads, xCos, zSin, nx, ny, nz, x, y, z, percentTotalAngle;
float subRads, x2 = 0, z2 = 0, x3, z3, xCos2 = 0, zSin2 = 0, nextRads = 0, nextPerc=0, subPerc, lerp;
y = height + offset.y;
ny = ySin;
for (int i = 0; i < numOfFaces + 1; i++)
{
if (i > 0)//vars were caled last round for the interpolation
{
rads = nextRads;
percentTotalAngle = nextPerc;
xCos = xCos2;
zSin = zSin2;
x = x2;
z = z2;
}
else
{
rads = startRad + (radPerFace * i);
percentTotalAngle = (rads - startRad) / totalRad;
xCos = Mathf.Cos(rads);
zSin = Mathf.Sin(rads);
x = xCos * radius + offset.x;
z = zSin * radius + offset.z;
}
nx = xCos * yCos;
nz = zSin * yCos;
verts.Add(addVertex(new Vector3(x, y, z), new Vector3(nx, ny, nz), new Vector2(area.getU(percentTotalAngle), v)));
//calculate the points/etc for the next panel face, to lerp between positions; data is re-used next iteration if present
nextRads = startRad + (radPerFace * (i + 1));
nextPerc = (nextRads - startRad) / totalRad;
xCos2 = Mathf.Cos(nextRads);
zSin2 = Mathf.Sin(nextRads);
x2 = xCos2 * radius + offset.x;
z2 = zSin2 * radius + offset.z;
//do not add subdivision panel if the next vertex is the last one in the ring
if (i == numOfFaces) { break; }
//if was the last vert... do not add subs
for (int k = 1; k < subdivision; k++)
{
lerp = (float)k / subdivision;
x3 = Mathf.Lerp(x, x2, lerp);
z3 = Mathf.Lerp(z, z2, lerp);
subRads = rads + (radPerSub * k);//subangle used for normal calc... position calculated from interpolation to maintain cylinder side matching
subPerc = (subRads - startRad) / totalRad;
xCos = Mathf.Cos(subRads);
zSin = Mathf.Sin(subRads);
nx = xCos * yCos;
nz = zSin * yCos;
verts.Add(addVertex(new Vector3(x3, y, z3), new Vector3(nx, ny, nz), new Vector2(area.getU(subPerc), v)));
}
}
return verts;
}
public List<Vertex> generateRadialVerticesFlatUVs(Vector3 offset, int faces, float radius, float height, float startAngle, float endAngle, float v, UVArea area, float yCos, float ySin)
{
List<Vertex> verts = new List<Vertex>();
float totalAngle = endAngle - startAngle;
float anglePerFace = 360f / faces;
int numOfFaces = (int)(totalAngle / anglePerFace);
float anglePerVert = totalAngle / (float)(numOfFaces + 1);
float angle, xCos, zSin, nx, ny, nz, x, y, z, percentTotalAngle;
for (int i = 0; i < numOfFaces + 1; i++)
{
angle = startAngle + anglePerFace * i;
percentTotalAngle = (angle - startAngle) / totalAngle;
xCos = Mathf.Cos(angle * Mathf.Deg2Rad);
zSin = Mathf.Sin(angle * Mathf.Deg2Rad);
x = xCos * radius + offset.x;
y = height + offset.y;
z = zSin * radius + offset.z;
nx = xCos * yCos;
ny = ySin;
nz = zSin * yCos;
verts.Add(addVertex(new Vector3(x, y, z), new Vector3(nx, ny, nz), new Vector2(area.getU(percentTotalAngle), v)));
}
return verts;
}
/// <summary>
/// Used to generate a ring of vertices with the uvMapping appropriate for a cylinder wall (increments in +x)
/// </summary>
/// <param name="offset"></param>
/// <param name="faces"></param>
/// <param name="radius"></param>
/// <param name="height"></param>
/// <param name="startAngle"></param>
/// <param name="endAngle"></param>
/// <param name="v"></param>
/// <param name="area"></param>
/// <param name="yCos"></param>
/// <param name="ySin"></param>
/// <returns></returns>
public List <Vertex> generateRadialVerticesFlatUVs(Vector3 offset, int faces, float radius, float height, float startAngle, float endAngle, float v, UVArea area, float yCos, float ySin)
{
List <Vertex> verts = new List <Vertex>();
float startRad = startAngle * Mathf.Deg2Rad;
float endRad = endAngle * Mathf.Deg2Rad;
float totalRad = endRad - startRad;
float radPerFace = (float)((2.0 * Math.PI) / faces);
float radPerSub = radPerFace / subdivision;
int numOfFaces = (int)Math.Round(totalRad / radPerFace, 0);
float rads, xCos, zSin, nx, ny, nz, x, y, z, percentTotalAngle;
float subRads, x2 = 0, z2 = 0, x3, z3, xCos2 = 0, zSin2 = 0, nextRads = 0, nextPerc = 0, subPerc, lerp;
y = height + offset.y;
ny = ySin;
for (int i = 0; i < numOfFaces + 1; i++)
{
if (i > 0)//vars were caled last round for the interpolation
{
rads = nextRads;
percentTotalAngle = nextPerc;
xCos = xCos2;
zSin = zSin2;
x = x2;
z = z2;
}
else
{
rads = startRad + (radPerFace * i);
percentTotalAngle = (rads - startRad) / totalRad;
xCos = Mathf.Cos(rads);
zSin = Mathf.Sin(rads);
x = xCos * radius + offset.x;
z = zSin * radius + offset.z;
}
nx = xCos * yCos;
nz = zSin * yCos;
verts.Add(addVertex(new Vector3(x, y, z), new Vector3(nx, ny, nz), new Vector2(area.getU(percentTotalAngle), v)));
//calculate the points/etc for the next panel face, to lerp between positions; data is re-used next iteration if present
nextRads = startRad + (radPerFace * (i + 1));
nextPerc = (nextRads - startRad) / totalRad;
xCos2 = Mathf.Cos(nextRads);
zSin2 = Mathf.Sin(nextRads);
x2 = xCos2 * radius + offset.x;
z2 = zSin2 * radius + offset.z;
//do not add subdivision panel if the next vertex is the last one in the ring
if (i == numOfFaces)
{
break;
}
//if was the last vert... do not add subs
for (int k = 1; k < subdivision; k++)
{
lerp = (float)k / subdivision;
x3 = Mathf.Lerp(x, x2, lerp);
z3 = Mathf.Lerp(z, z2, lerp);
subRads = rads + (radPerSub * k);//subangle used for normal calc... position calculated from interpolation to maintain cylinder side matching
subPerc = (subRads - startRad) / totalRad;
xCos = Mathf.Cos(subRads);
zSin = Mathf.Sin(subRads);
nx = xCos * yCos;
nz = zSin * yCos;
verts.Add(addVertex(new Vector3(x3, y, z3), new Vector3(nx, ny, nz), new Vector2(area.getU(subPerc), v)));
}
}
return(verts);
}