private void SetAttrsByArraylistToJobAttrs(XmlDocument xmldoc, XmlElement parentElem, string[] attrs, ArrayList[] arraylist, string attrname)
{
//循环给每一个节点赋值，并挂载到父节点
int i = 0;
foreach (var item in arraylist)
{
XmlElement element = xmldoc.CreateElement(attrname);
object[] obj = item.ToArray();
XmlGenerate.AutoGerateCNodeAttr_CORE(element, parentElem, attrs, obj);
i++;
}
}
/// <summary>
/// 给子节点组中的子节点属性批量赋值
/// </summary>
/// <param name="xmldoc"></param>
/// <param name="parentElemt"></param>
/// <param name="xmlElements"></param>
/// <param name="attrs"></param>
/// <param name="list"></param>
/// <param name="attrname"></param>
internal static void SetAttrsByArrayToJobAttrs2(XmlDocument xmldoc, XmlElement parentElemt, XmlElement[] xmlElements, string[] attrs, List <Dictionary <string, string> > list, string attrname)
{
foreach (var xmlelement in xmlElements)
{
XmlElement childElem = xmldoc.CreateElement(attrname);
int i = 0;
foreach (var listelement in list)
{
XmlGenerate.AutoGerateCNodeAttr_CORE(parentElemt, childElem, attrs, listelement.Values.ToArray());
i++;
}
string count = parentElemt.OuterXml;
}
//循环给每一个节点赋值，并挂载到父节点
//加载父节点;{rootNode.Name} 设置子节点 {nodeChild.Name} 属性：{attrName[i]} 属性值： {value[i]}
}
/// <summary>
/// 获取DrillLayer
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void GetDrillLayer()
{
int totalDrllPrgs;
totalDrllPrgs = 0;
try
{
foreach (IDrillProgram lDrllPrgs in theJob.DrillPrgs())
{
totalDrllPrgs = totalDrllPrgs + 1;
}
jobNum_DRILL_LIST = totalDrllPrgs;
Dictionary <string, string>[] dictDRILL_LIST = new Dictionary <string, string> [totalDrllPrgs];
int i;
i = 0;
for (int dictLength = 0; dictLength < dictDRILL_LIST.Length; dictLength++)
{
dictDRILL_LIST[dictLength] = new Dictionary <string, string>();
}
foreach (IDrillProgram DrllPrgs in theJob.DrillPrgs())
{
Dictionary <string, string> dictAllDRILL_LIST = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(DrllPrgs, dictAllDRILL_LIST);
dictDRILL_LIST[i].Add("VIA_TYPE", dictAllDRILL_LIST["DRILL_TYPE"]);
dictDRILL_LIST[i].Add("START_LAYER", dictAllDRILL_LIST["START_INDEX"]);
dictDRILL_LIST[i].Add("END_LAYER", dictAllDRILL_LIST["END_INDEX"]);
i++;
}
listDRILL_LISTT = new List <Dictionary <string, string> >();
foreach (var item in dictDRILL_LIST)
{
listDRILL_LISTT.Add(item);
}
}
catch (Exception ex)
{
string str = ex.ToString();
//throw;
}
}
internal static void SetAttrsByArrayToJobAttrs(XmlDocument xmldoc, XmlElement parentElem, XmlElement[] xmlElements, string[] attrs, List <string[]> list, string attrname)
{
//foreach (var xmlelement in xmlElements)
//{
//循环给每一个节点赋值，并挂载到父节点
foreach (var listElem in list)
{
int i = 0;
XmlElement childElem = xmldoc.CreateElement(attrname);
XmlGenerate.AutoGerateCNodeAttr_CORE(parentElem, childElem, attrs, listElem.ToArray());
i++;
}
//}
//循环给每一个节点赋值，并挂载到父节点
//int i = 0;
//foreach (var item in list)
//{
// XmlElement element = xmldoc.CreateElement(attrname);
// XmlGenerate.AutoGerateCNodeAttr_CORE(element, parentElem, attrs, item.ToArray());
// i++;
//}
}
/// <summary>
/// 给子节点组中的子节点属性批量赋值
/// </summary>
/// <param name="xmldoc"></param>
/// <param name="parentElemt"></param>
/// <param name="xmlElements"></param>
/// <param name="attrs"></param>
/// <param name="list"></param>
/// <param name="attrname"></param>
internal static void SetAttrsByArrayToJobAttrs3(XmlDocument xmldoc, XmlElement parentElemt, XmlElement[] xmlElements, List <Dictionary <string, string> > list, string attrname)
{
//int i = 0;
//最原始的想法 再引入数组批量赋值 xmlelement.SetAttribute(list[i].Keys,list[i].Values);
List <string[]> keyslist = new List <string[]>();
List <string[]> valueslist = new List <string[]>();
try
{
foreach (var li in list)
{
int j = 0;
int k = 0;
string[] strkey = new string[li.Keys.Count];
string[] strvalue = new string[li.Keys.Count];
foreach (var key in li.Keys)
{
strkey[j] = key.ToString();
j++;
}
keyslist.Add(strkey);
foreach (var value in li.Values)
{
strvalue[k] = value.ToString();
k++;
}
valueslist.Add(strvalue);
}
}
catch (Exception ex)
{
string exstr = ex.ToString();
//throw;
}
int i = 0;
foreach (var xmlelement in xmlElements)
{
XmlElement childElem = xmldoc.CreateElement(attrname);
XmlGenerate.AutoGerateCNodeAttr_CORE(parentElemt, childElem, keyslist[i].ToArray(), valueslist[i].ToArray());
i++;
}
//foreach (var xmlelement in xmlElements)
//{
// int q = 0;
// //xmlelement = xmldoc.CreateElement(attrname);
// for (int m = 0; m < 12; m++)
// {
// xmlelement.SetAttribute(list[q].[m], strvalue[m]);
// }
// parentElemt.AppendChild(xmlelement);
//}
//循环给每一个节点赋值，并挂载到父节点
string count = parentElemt.OuterXml;
//加载父节点;{rootNode.Name} 设置子节点 {nodeChild.Name} 属性：{attrName[i]} 属性值： {value[i]}
}
/// <summary>
/// 创建XML到文档并调用SiSolver生成阻抗报告
/// </summary>
private void CreateXmlDoc()
{
//1、创建XML文档实例
XmlDocument xmldoc = new XmlDocument();
string version = "1.0";
string encoding = "UTF-8";
string standalone = "yes";
//2、创建文档声明
XmlDeclaration dec = xmldoc.CreateXmlDeclaration(version, encoding, standalone);
xmldoc.AppendChild(dec);
//3、创建文档元素
//Doc节点
XmlElement rootNode = xmldoc.CreateElement("Document");
//一级 节点设置属性
try
{
int length = attrDocument.Length;
Dictionary <string, string> dictDocument = new Dictionary <string, string>();
string[] attrDocument_values = new string[length];
string[] attrDocument_keys = new string[length];
GetCustomer();
dictDocument.Add("Dev_Owner", "SISOLVER");
dictDocument.Add("Fab", "FOUNDERPCBF5");
dictDocument.Add("Version", "1.0");
dictDocument.Add("Project_Name", "Test");
dictDocument.Add("Project_Ver", "A0");
dictDocument.Add("Project_Designer", "SISOLVER");
dictDocument.Add("Date", DateTime.Now.ToString());
dictDocument.Add("Layer_Count", jobName.Substring(2, 2));
dictDocument.Add("Base_Material", base_Material); //base_Material
dictDocument.Add("Customer", "FOUNDERPCBF5");
dictDocument.Add("Stackup_Ready", "YES");
dictDocument.Add("Imp_Calc_Fixed", "NO");
dictDocument.Add("Width_Min", "2"); //Width_Min="待确认" 这个预设为2
int k = 0;
foreach (var item in dictDocument.Keys)
{
attrDocument_keys[k] = item.ToString();
k++;
}
int v = 0;
foreach (var item in dictDocument.Values)
{
attrDocument_values[v] = item.ToString();
v++;
}
XmlGenerate.AutoGerateAttr(xmldoc, rootNode, attrDocument_keys, attrDocument_values);
}
catch (Exception)
{
throw;
}
//二级 节点设置属性
XmlElement nodeChild0 = xmldoc.CreateElement("Materials");
XmlElement nodeChild1 = xmldoc.CreateElement("Materials");
XmlElement nodeChild2 = xmldoc.CreateElement("Materials");
XmlElement nodeChild3 = xmldoc.CreateElement("STACKUP_Segments");
XmlElement nodeChild4 = xmldoc.CreateElement("Process_Parameters");
XmlElement nodeChild5 = xmldoc.CreateElement("Process_Parameters");
XmlElement nodeChild6 = xmldoc.CreateElement("Process_Parameters");
XmlElement nodeChild7 = xmldoc.CreateElement("Process_Parameters");
XmlElement nodeChild8 = xmldoc.CreateElement("Impedance_Lists");
XmlGenerate.AutoGerateCNodeAttr(rootNode, nodeChild0, attrMaterials, "CORE");
XmlGenerate.AutoGerateCNodeAttr(rootNode, nodeChild1, attrMaterials, "PREPREG");
XmlGenerate.AutoGerateCNodeAttr(rootNode, nodeChild2, attrMaterials, "FOIL");
XmlGenerate.AutoGerateCNodeAttr(rootNode, nodeChild4, attrProcess_Parameters, "CU_LAYER");
XmlGenerate.AutoGerateCNodeAttr(rootNode, nodeChild5, attrProcess_Parameters, "DIE_LAYER");
XmlGenerate.AutoGerateCNodeAttr(rootNode, nodeChild6, attrProcess_Parameters, "SM_LAYER");
XmlGenerate.AutoGerateCNodeAttr(rootNode, nodeChild7, attrProcess_Parameters, "DRILL_LIST");
//三级 节点设置属性
//Job对象： CORE、PREPREG、FOIL、STACKUP_SEG、CU_LAYER、DIE_LAYER、SM_LAYER、DRILL_LIST、IMP_ITEM
// 三级节点个数 由Job决定
XmlElement[] xmlTEle_CORE = new XmlElement[jobNum_CORE]; //Job对应的所有CORE
XmlElement[] xmlTEle_PREPREG = new XmlElement[jobNum_PREPREG]; //Job对应的所有PREPREG
XmlElement[] xmlTEle_FOIL = new XmlElement[jobNum_FOIL]; //Job对应的所有FOIL
XmlElement[] xmlTEle_STACKUP_SEG = new XmlElement[jobNum_STACKUP_SEG]; //Job对应的所有STACKUP_SEG
XmlElement[] xmlTEle_CU_LAYER = new XmlElement[jobNum_CU_LAYER]; //Job对应的所有CU_LAYER
XmlElement[] xmlTEle_DIE_LAYER = new XmlElement[jobNum_DIE_LAYER]; //Job对应的所有DIE_LAYER
XmlElement[] xmlTEle_SM_LAYER = new XmlElement[1]; //Job对应的所有SM_LAYER
XmlElement[] xmlTEle_DRILL_LIST = new XmlElement[jobNum_DRILL_LIST]; //Job对应的所有DRILL_LIST
XmlElement[] xmlTEle_IMP_ITEM = new XmlElement[jobNum_IMP_ITEM]; //Job对应的所有IMP_ITEM
string stop = "";
try
{
XmlGenerate.SetAttrsByArrayToJobAttrs3(xmldoc, nodeChild0, xmlTEle_CORE, listCoreT, "CORE");
XmlGenerate.SetAttrsByArrayToJobAttrs3(xmldoc, nodeChild1, xmlTEle_PREPREG, listPrepregT, "PREPREG");
XmlGenerate.SetAttrsByArrayToJobAttrs3(xmldoc, nodeChild2, xmlTEle_FOIL, listFoilT, "FOIL");
XmlGenerate.SetAttrsByArrayToJobAttrs(xmldoc, nodeChild3, xmlTEle_STACKUP_SEG, attrsMaterialsStackupSegms, listStackupSeg, "STACKUP_SEG");
XmlGenerate.SetAttrsByArrayToJobAttrs3(xmldoc, nodeChild4, xmlTEle_CU_LAYER, listCU_LAYERT, "CU_LAYER");
XmlGenerate.SetAttrsByArrayToJobAttrs3(xmldoc, nodeChild5, xmlTEle_DIE_LAYER, listDieLayerT, "DIE_LAYER");
XmlGenerate.SetAttrsByArrayToJobAttrs(xmldoc, nodeChild6, xmlTEle_SM_LAYER, attrsProParaSM_LAYER, listSM_LAYER, "SM_LAYER");
XmlGenerate.SetAttrsByArrayToJobAttrs3(xmldoc, nodeChild7, xmlTEle_DRILL_LIST, listDRILL_LISTT, "DRILL_LIST");
XmlGenerate.SetAttrsByArrayToJobAttrs3(xmldoc, nodeChild8, xmlTEle_IMP_ITEM, listIMP_ITEMT, "IMP_ITEM");
}
catch (Exception)
{
//throw;
}
//二级节点 一级节点
XmlNode[] node = { nodeChild0, nodeChild1, nodeChild2, nodeChild3, nodeChild4, nodeChild5, nodeChild6, nodeChild7, nodeChild8 };
foreach (var item in node)
{
rootNode.AppendChild(item);
}
//一级节点 顶级节点
//jobName = "ME10N20JG6A3";//"GE02N20FQ4A0";
string folderpath = string.Format("C:\\SiSolverCalculate\\{0}\\", jobName);
string filepath = string.Format("C:\\SiSolverCalculate\\{0}\\{1}.xml", jobName, jobName);
string p1 = string.Format("C:\\SiSolverCalculate\\{0}\\", jobName);
string filename = string.Format("{0}.xml", jobName);
if (!Directory.Exists(folderpath))
{
Directory.CreateDirectory(folderpath);
//创建文件
xmldoc.Save(filepath);
XmlGenerate.InterfaceOfSiSolver(filepath);
}
else
{
//文件是否存在，创建文件
if (File.Exists(filepath))
{
//判断是否存在文件
//MessageBox.Show("阻抗已成功生成，如继续将生成的文件");
string str = XmlGenerate.fileExists(filepath, p1, times, jobName);
xmldoc.Save(str);
Thread.Sleep(10000);
XmlGenerate.InterfaceOfSiSolver(str);//p1 + str
//times = 1;
}
else
{
xmldoc.Save(filepath);
Thread.Sleep(10000);
XmlGenerate.InterfaceOfSiSolver(filepath);
}
}
}
/// <summary>
/// 获取阻抗 Impedance_Lists
/// path: 由于获取阻抗是 STACKUP 中取
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void GetImpedance_Lists2()
{
//stackup 获取阻抗
stackup = theJob.Stackup();
int totalImpCon;
int totalImpLin;
totalImpCon = 0;
totalImpLin = 0;
//IImpedanceConstraint
foreach (IImpedanceConstraint impCon in stackup.ImpedanceConstraints())
{
totalImpCon = totalImpCon + 1;
}
jobNum_IMP_ITEM = totalImpCon;
Dictionary <string, string>[] dictImpCon = new Dictionary <string, string> [totalImpCon];
Dictionary <string, string>[] dictImpLin = new Dictionary <string, string> [totalImpLin];
for (int dictImpConLength = 0; dictImpConLength < dictImpCon.Length; dictImpConLength++)
{
dictImpCon[dictImpConLength] = new Dictionary <string, string>();
}
for (int dictImpLinLength = 0; dictImpLinLength < dictImpLin.Length; dictImpLinLength++)
{
dictImpLin[dictImpLinLength] = new Dictionary <string, string>();
}
int i;
i = 0;
try
{
foreach (IImpedanceConstraint impCon in stackup.ImpedanceConstraints())
{
Dictionary <string, string> dictAllImpCon = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(impCon, dictAllImpCon);
//阻抗模型 取值 OK
//编号取层 OK
//字段取值 NOT NUM_SIGNAL="待确定"
int modecode = (int)Enum.Parse(typeof(XmlGenerate.ImdependenceModel), impCon.ModelName(), true);
//字段取值
//string modelname=impCon.ModelName();
//信号层
ICopperLayer trace_layer;
trace_layer = impCon.ControlledTraceLayer();
string tracelayer = trace_layer.Name();
if (tracelayer == "COMP")
{
tracelayer = "1";
}
else if (tracelayer == "SOLD")
{
tracelayer = jobName.Substring(2, 2);
}
//参考层 TopModelLayer BottomModelLayer
ICopperLayer copperLayertop;
ICopperLayer copperLayerbot;
copperLayertop = impCon.TopModelLayer();
copperLayerbot = impCon.BottomModelLayer();
string reftop;
string refbot;
if (impCon.TopModelLayer() is null)
{
reftop = "0";
}
else
{
reftop = copperLayertop.Name();
}
if (impCon.BottomModelLayer() is null)
{
refbot = "0";
}
else
{
refbot = copperLayerbot.Name();
}
//7和8这个模型，单独只取BOTTOM_MODEL_LAYER可行 时间：2019年7月22日22:26:26
if (modecode == 7 || modecode == 8)
{
reftop = "0";
refbot = copperLayerbot.Name();
}
if (reftop == "COMP")
{
reftop = "1";// L去掉
}
else if (reftop == "SOLD")
{
reftop = "" + jobName.Substring(2, 2);
}
if (refbot == "COMP")
{
refbot = "1";
}
else if (refbot == "SOLD")
{
refbot = "" + jobName.Substring(2, 2);
}
// 字段： 区分单根双根阻抗 NUM_SIGNAL 待确定
// 字段：目标阻抗值 ZO_TARGET CalculationRequiredImpedance()
//发现一个问题： 客户要求阻抗不在JOB中
double omCustomer = impCon.CustomerRequiredImpedance(AvailableUnits.OHMS);
double LWCustomer = impCon.OriginalTraceWidth(AvailableUnits.MIL);
double LSCopCustomer = impCon.CustomerRequiredCoplanarSpacing(AvailableUnits.MIL);
double LSDifCustomer = impCon.CustomerRequiredDifferentialSpacing(AvailableUnits.MIL);
double omdouble = impCon.CalculationRequiredImpedance(AvailableUnits.OHMS);
double omtol = omdouble * 0.1;
string omstring = impCon.CalculationRequiredImpedance(AvailableUnits.OHMS).ToString();
// 字段： 目标阻抗值公差 ZO_TOL （10%） CalculationRequiredImpedancePlusTol CalculationRequiredImpedanceMinusTol
string tolp = impCon.CalculationRequiredImpedancePlusTol(AvailableUnits.OHMS).ToString();
string tolm = impCon.CalculationRequiredImpedanceMinusTol(AvailableUnits.OHMS).ToString();
//字段： 设计线宽 WIDTH_DESIGN CALCULATION_REQ_TRACE_WIDTH
//已更改
double width_double = impCon.CalculationReqLineWidth(AvailableUnits.MIL);
string width = impCon.CalculationReqLineWidth(AvailableUnits.MIL).ToString();
//设计间距(差分间距) SPACE_DESIGN DIFF_SPACE_
//共面阻抗间距 COPLANAR_SPACE_DESIGN COPLANARITY_SPACE_
bool cop = impCon.IsNullCustomerRequiredCoplanarSpacing();
bool sx = impCon.IsNullCustomerRequiredDifferentialSpacing();
//返回值即可 UDAS属性 值
//设计间距(差分间距) SPACE_DESIGN DIFF_SPACE_
//共面阻抗间距 COPLANAR_SPACE_DESIGN COPLANARITY_SPACE_
dictImpCon[i].Add("ITEM_INDEX", (i + 1).ToString());
dictImpCon[i].Add("IMP_MODEL_NO", modecode.ToString());
dictImpCon[i].Add("SIGNAL_LAYER", tracelayer.Replace("L", ""));//删除L
dictImpCon[i].Add("REF_LAYER_1", reftop.Replace("L", ""));
dictImpCon[i].Add("REF_LAYER_2", refbot.Replace("L", ""));
if (LSDifCustomer > 0)
{
dictImpCon[i].Add("NUM_SIGNAL", "2");
}
else if (LSDifCustomer == 0)
{
dictImpCon[i].Add("NUM_SIGNAL", "1");
}
//dictImpCon[i].Add("NUM_SIGNAL", (width_double > 0 ? "2" : "1"));
//dictImpCon[i].Add("NUM_SIGNAL", " "); //待确定 omCustomer
dictImpCon[i].Add("ZO_TARGET", omCustomer.ToString());
//客户要求阻抗
dictImpCon[i].Add("ZO_TOL", (omCustomer * 0.1).ToString());
//dictImpCon[i].Add("ZO_TOL", omtol.ToString());
dictImpCon[i].Add("WIDTH_DESIGN", LWCustomer.ToString());
//LSCopCustomer
dictImpCon[i].Add("SPACE_DESIGN", LSDifCustomer.ToString());
//dictImpCon[i].Add("SPACE_DESIGN", dictAllImpCon["DIFF_SPACE_"]);
dictImpCon[i].Add("COPLANAR_SPACE_DESIGN", LSCopCustomer.ToString());
//dictImpCon[i].Add("COPLANAR_SPACE_DESIGN", dictAllImpCon["COPLANARITY_SPACE_"]);
i++;
}
listIMP_ITEMT = new List <Dictionary <string, string> >();
foreach (var item in dictImpCon)
{
listIMP_ITEMT.Add(item);
}
}
catch (Exception ex)
{
string str = ex.ToString();
//throw;
}
}
/// <summary>
/// 获取MaskLayer
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void GetMaskLayer()
{
List <string[]> list = new List <string[]>();
string[] mask = new string[4];
mask[0] = "4";//默认4.0
double CU_FINISH_THICKNESS = job_CU_FINISH_THICKNESS;
double T1;
double T2;
double T3;
double T4;
T1 = XmlGenerate.UmToMil(46);
T2 = XmlGenerate.UmToMil(63.5);
T3 = XmlGenerate.UmToMil(89);
T4 = XmlGenerate.UmToMil(114);
double c1; //基材防焊厚度
double c2; //线路防焊厚度
double c3; //基材防焊厚度
if (CU_FINISH_THICKNESS < T1)
{
c1 = XmlGenerate.UmToMil(38);
c2 = XmlGenerate.UmToMil(18);
c3 = XmlGenerate.UmToMil(18);
mask[1] = c1.ToString();
mask[2] = c2.ToString();
mask[3] = c3.ToString();
}
else if (CU_FINISH_THICKNESS >= T1 && CU_FINISH_THICKNESS < T2)
{
c1 = XmlGenerate.UmToMil(48);
c2 = XmlGenerate.UmToMil(18);
c3 = XmlGenerate.UmToMil(18);
mask[1] = c1.ToString();
mask[2] = c2.ToString();
mask[3] = c3.ToString();
}
else if (CU_FINISH_THICKNESS >= T2 && CU_FINISH_THICKNESS < T3)
{
c1 = XmlGenerate.UmToMil(58);
c2 = XmlGenerate.UmToMil(30);
c3 = XmlGenerate.UmToMil(30);
mask[1] = c1.ToString();
mask[2] = c2.ToString();
mask[3] = c3.ToString();
}
else if (CU_FINISH_THICKNESS >= T3 && CU_FINISH_THICKNESS < T4)
{
c1 = XmlGenerate.UmToMil(90);
c2 = XmlGenerate.UmToMil(30);
c3 = XmlGenerate.UmToMil(30);
mask[1] = c1.ToString();
mask[2] = c2.ToString();
mask[3] = c3.ToString();
}
list.Add(mask);
listSM_LAYER = list;
}
/// <summary>
/// 获取Process_Parameters CopperLayer
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void GetCopperLayer()
{
int totalCoperLayer;
totalCoperLayer = 0;
//先对coperlayer取值
//theJob.CopperLayers();
foreach (ICopperLayer copper in theJob.CopperLayers())
{
totalCoperLayer = totalCoperLayer + 1;
}
jobNum_CU_LAYER = totalCoperLayer;
Dictionary <string, string>[] dictCU_LAYER = new Dictionary <string, string> [totalCoperLayer];
int i;
i = 0;
for (int dictLength = 0; dictLength < dictCU_LAYER.Length; dictLength++)
{
dictCU_LAYER[dictLength] = new Dictionary <string, string>();
}
int len_process = XmlGenerate.jobcomponslength(theJob.AllProcesses(false));
string[] AllCuFinish_Thickness = new string[len_process];
//获取： //每一层的原始铜厚
int j = 0;
foreach (IProcess process in theJob.AllProcesses(false))
{
//Dictionary<string, string> dictAllProcess = new Dictionary<string, string>();
//XmlGenerate.AllAttrGetKeyValues(process, dictAllProcess);
Dictionary <string, double> dictAllProcessDoubleData = new Dictionary <string, double>();
XmlGenerate.AllAttrGetKeyValues_double(process, dictAllProcessDoubleData);
double d1 = dictAllProcessDoubleData["PLATING_THK_MAX_"];
double d2 = dictAllProcessDoubleData["PLATING_THK_MIN_"];
double a3 = (d1 + d2) / 2;
AllCuFinish_Thickness[j] = a3.ToString();
//线路完成面铜厚度取Procee（Final Assembly）下PLATING_THK_MIN_和PLATING_THK_MAX_的平均值
job_CU_FINISH_THICKNESS = a3;
j++;
}
try
{
foreach (ICopperLayer copper in theJob.CopperLayers())
{
string CU_LAYER_INDEX = i.ToString();// 添加到最后生成的键值对中
Dictionary <string, string> dictAllCU_LAYER = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(copper, dictAllCU_LAYER);
//string str =dictAllCU_LAYER["d "];
dictCU_LAYER[i].Add("CU_LAYER_INDEX", (i + 1).ToString());
if (i == 0)
{
dictCU_LAYER[i].Add("CU_FINISH_THICKNESS", AllCuFinish_Thickness[0]);
}
else
{
//dictCU_LAYER[i].Add("CU_FINISH_THICKNESS", dictAllCU_LAYER["OVERALL_THICKNESS"]);
dictCU_LAYER[i].Add("CU_FINISH_THICKNESS", dictAllCU_LAYER["LAYER_FINISH_CU_THK_"]);
//dictCU_LAYER[i].Add("CU_FINISH_THICKNESS", copper.RequiredThickness(AvailableUnits.MIL).ToString());
}
//下划线可不输入
//dictCU_LAYER[i].Add("CU_RAW_THICKNESS_", dictAllCU_LAYER["COPPER_USAGE"]);
dictCU_LAYER[i].Add("COPPER_USAGE", dictAllCU_LAYER["COPPER_USAGE"]);
dictCU_LAYER[i].Add("CU_RAW_WEIGHT", dictAllCU_LAYER["REQUIRED_CU_WEIGHT"]);
//字段待确定
dictCU_LAYER[i].Add("CU_UNDERCUT", ""); //待确定
//dictCU_LAYER[i].Add("LAYER_SIGNAL_TYPE_", dictAllCU_LAYER["COPPER_USAGE"]);
i++;
}
listCU_LAYERT = new List <Dictionary <string, string> >();
foreach (var item in dictCU_LAYER)
{
listCU_LAYERT.Add(item);
}
}
catch (Exception ex)
{
string exmess = ex.ToString();
//throw;
}
}
/// <summary>
/// 获取Materials
/// 已获取，保存数据即可
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void GetMaterial()
{
//根据MRP_NAME 属性 去掉重复的 Material FOIL CORE PREPREG
Dictionary <string, string> dictFoilMrpName = new Dictionary <string, string>();
Dictionary <string, string> dictPrepregMrpName = new Dictionary <string, string>();
Dictionary <string, string> dictCoreMrpName = new Dictionary <string, string>();
//根据MRP_NAME 属性 去掉重复的 Material FOIL CORE PREPREG
Dictionary <string, string> dictFoilMrpName_N = new Dictionary <string, string>();
Dictionary <string, string> dictPrepregMrpName_N = new Dictionary <string, string>();
Dictionary <string, string> dictCoreMrpName_N = new Dictionary <string, string>();
int Total_Core = 0;
int Total_Foil = 0;
int Total_Prepreg = 0;
stackup = theJob.Stackup();//job->stackup
//1、获取数组的长度 {CORE}[X] [FOIL][X] <PREPREG>[X]
foreach (IStackupSegment seg in stackup.BuildUpSegments()) //stackup->stksegements->stksegement
{
//***************生成stakupsegment
seg.SegmentIndex();
seg.SegmentType();
//seg.JobMaterials(); //stackupsegement
foreach (IJobMaterial jobmat in seg.JobMaterials()) //stksegement->jobmaterials
{
IMaterial mat = jobmat.Material(); //jobmaterials->jobmaterial
//***************生成stakupsegment
mat.MrpName();
if (mat.MtrType() == MtrType.CORE_MTR)//material->分类 material(CORE)
{
if (!dictCoreMrpName.Keys.Contains(mat.MrpName()))
{
dictCoreMrpName.Add(mat.MrpName(), "第" + (Total_Core + 1).ToString() + "种类别的" + mat.MtrType() + ": " + mat.MrpName());
Total_Core++;
}
}
if (mat.MtrType() == MtrType.FOIL_MTR)//material->分类 material(CORE)
{
if (!dictFoilMrpName.Keys.Contains(mat.MrpName()))
{
dictFoilMrpName.Add(mat.MrpName(), "第" + (Total_Foil + 1).ToString() + "种类别的" + mat.MtrType() + ": " + mat.MrpName());
Total_Foil++;
}
}
if (mat.MtrType() == MtrType.PREPREG_MTR)//material->分类 material(CORE)
{
if (!dictPrepregMrpName.Keys.Contains(mat.MrpName()))
{
dictPrepregMrpName.Add(mat.MrpName(), "第" + (Total_Prepreg + 1).ToString() + "种类别的" + mat.MtrType() + ": " + mat.MrpName());
Total_Prepreg++;
}
}
}
}
//2 给键值对数组建立固定数组赋初值
Dictionary <string, dynamic> udaObj = new Dictionary <string, dynamic>();
Dictionary <string, string>[] dictFoil = new Dictionary <string, string> [Total_Foil];
Dictionary <string, string>[] dictCore = new Dictionary <string, string> [Total_Core];
Dictionary <string, string>[] dictPrepreg = new Dictionary <string, string> [Total_Prepreg];
for (int arrayLenth = 0; arrayLenth < dictFoil.Length; arrayLenth++)
{
dictFoil[arrayLenth] = new Dictionary <string, string>();
}
for (int arrayLenth = 0; arrayLenth < dictCore.Length; arrayLenth++)
{
dictCore[arrayLenth] = new Dictionary <string, string>();
}
for (int arrayLenth = 0; arrayLenth < dictPrepreg.Length; arrayLenth++)
{
dictPrepreg[arrayLenth] = new Dictionary <string, string>();
}
//给键值对数组 添加指定属性的元素
//数组下标
int i, j, k;
i = 0;
j = 0;
k = 0;
try
{
foreach (IStackupSegment seg in stackup.BuildUpSegments()) //stackup->stksegements->stksegement
{
foreach (IJobMaterial jobmat in seg.JobMaterials()) //stksegement->jobmaterials
{
IMaterial mat = jobmat.Material(); //jobmaterials->jobmaterial
//base_Material = mat.Family();
if (mat.MtrType() == MtrType.FOIL_MTR) //material->分类 material(CORE)
{
//针对CORE属性 1、CORE所有属性 2、属性筛选 3、添加键值对
IFoil foil = mat.Foil();
Dictionary <string, string> dictAllFoil = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(foil, dictAllFoil);
XmlGenerate.AllAttrGetKeyValues(mat, dictAllFoil);
//Base_Material = dictAllFoil["FAMILY"];
string[] a = attrsMaterialsFoil;
string[] b = attrsMaterialsFoil_Inplan;
int length = 0;
if (a.Length == b.Length)
{
length = a.Length;
}
else
{
string str = "请检查是否数组长度定义一一对应";
}
if (!dictFoilMrpName_N.Keys.Contains(dictAllFoil["MRP_NAME"]))
{
dictFoilMrpName_N.Add(dictAllFoil["MRP_NAME"], "第" + (i + 1).ToString() + "种类别的" + mat.MtrType() + ": " + dictAllFoil["MRP_NAME"]);
for (int l = 0; l < length; l++)
{
dictFoil[i].Add(a[l], dictAllFoil[b[l]]);
}
i++;
}
string debug = "";
}
if (mat.MtrType() == MtrType.PREPREG_MTR)//material->分类 material(CORE)
{
IPrepreg prepreg = mat.Prepreg();
Dictionary <string, string> dictAllPrepreg = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(prepreg, dictAllPrepreg);
XmlGenerate.AllAttrGetKeyValues(mat, dictAllPrepreg);
base_Material = dictAllPrepreg["FAMILY"];
string[] a = attrsMaterialsPrepreg;
string[] b = attrsMaterialsPrepreg_Inplan;
int length = 0;
if (a.Length == b.Length)
{
length = a.Length;
}
else
{
string str = "请检查是否数组长度定义一一对应";
}
if (!dictPrepregMrpName_N.Keys.Contains(dictAllPrepreg["MRP_NAME"]))
{
dictPrepregMrpName_N.Add(dictAllPrepreg["MRP_NAME"], "第" + (j + 1).ToString() + "种类别的" + mat.MtrType() + ": " + dictAllPrepreg["MRP_NAME"]);
for (int l = 0; l < length; l++)
{
dictPrepreg[j].Add(a[l], dictAllPrepreg[b[l]]);
}
j++;
}
string debug = "";
}
if (mat.MtrType() == MtrType.CORE_MTR)//material->分类 material(CORE)
{
ICore core = mat.Core();
Dictionary <string, string> dictAllCore = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(core, dictAllCore);
XmlGenerate.AllAttrGetKeyValues(mat, dictAllCore);
base_Material = dictAllCore["FAMILY"];
string[] a = attrsMaterialsCore;
string[] b = attrsMaterialsCore_Inplan;
int length = 0;
if (a.Length == b.Length)
{
length = a.Length;
}
else
{
string str = "请检查是否数组长度定义一一对应";
}
if (!dictCoreMrpName_N.Keys.Contains(dictAllCore["MRP_NAME"]))
{
dictCoreMrpName_N.Add(dictAllCore["MRP_NAME"], "第" + (k + 1).ToString() + "种类别的" + mat.MtrType() + ": " + dictAllCore["MRP_NAME"]);
for (int l = 0; l < length; l++)
{
dictCore[k].Add(a[l], dictAllCore[b[l]]);
}
k++;
}
string debug = "";
}
}
}
//对应XML子节点个数
jobNum_FOIL = Total_Foil;
jobNum_PREPREG = Total_Prepreg;
jobNum_CORE = Total_Core;
jobNum_STACKUP_SEG = Total_Foil + Total_Prepreg + Total_Core;
listFoilT = new List <Dictionary <string, string> >();
listPrepregT = new List <Dictionary <string, string> >();
listCoreT = new List <Dictionary <string, string> >();
foreach (var item in dictFoil)
{
listFoilT.Add(item);
}
foreach (var item in dictPrepreg)
{
listPrepregT.Add(item);
}
foreach (var item in dictCore)
{
listCoreT.Add(item);
}
dictFoilT = dictFoil;
dictPrepregT = dictPrepreg;
dictCoreT = dictCore;
}
catch (Exception ex)
{
string exmess = ex.ToString();
//throw;
}
}