/// <summary>
/// Gets fired when a suspected SIP message is extracted from the TCP data stream.
/// </summary>
protected void SIPTCPMessageReceived(SIPChannel channel, SIPEndPoint remoteEndPoint, byte[] buffer)
{
if (m_connectionFailures.ContainsKey(remoteEndPoint.GetIPEndPoint().ToString()))
{
m_connectionFailures.Remove(remoteEndPoint.GetIPEndPoint().ToString());
}
if (m_connectionFailureStrikes.ContainsKey(remoteEndPoint.GetIPEndPoint().ToString()))
{
m_connectionFailureStrikes.Remove(remoteEndPoint.GetIPEndPoint().ToString());
}
SIPMessageReceived?.Invoke(channel, remoteEndPoint, buffer);
}
/// <summary>
/// Get the local SIPEndPoint this channel will use for communicating with the destination SIP end point.
/// </summary>
/// <param name="dstEndPoint">The destination SIP end point.</param>
/// <returns>The local SIP end points this channel selects to use for connecting to the destination.</returns>
internal virtual SIPEndPoint GetLocalSIPEndPointForDestination(SIPEndPoint dstEndPoint)
{
IPAddress dstAddress = dstEndPoint.GetIPEndPoint().Address;
IPAddress localAddress = GetLocalIPAddressForDestination(dstAddress);
return(new SIPEndPoint(SIPProtocol, localAddress, Port, ID, null));
}
/// <summary>
/// This constructor is used to create non-INVITE dialogues for example the dialogues used in SIP event interactions
/// where the dialogue is created based on a SUBSCRIBE request.
/// </summary>
public SIPDialogue(
SIPRequest nonInviteRequest,
string toTag)
{
Id = Guid.NewGuid();
CallId = nonInviteRequest.Header.CallId;
RouteSet = (nonInviteRequest.Header.RecordRoutes != null) ? nonInviteRequest.Header.RecordRoutes.Reversed() : null;
RemoteUserField = nonInviteRequest.Header.From.FromUserField;
RemoteTag = nonInviteRequest.Header.From.FromTag;
LocalUserField = nonInviteRequest.Header.To.ToUserField;
LocalUserField.Parameters.Set("tag", toTag);
LocalTag = toTag;
CSeq = nonInviteRequest.Header.CSeq;
Inserted = DateTime.UtcNow;
Direction = SIPCallDirection.Out;
// Set the dialogue remote target and take care of mangling if an upstream proxy has indicated it's required.
RemoteTarget = nonInviteRequest.Header.Contact[0].ContactURI;
ProxySendFrom = nonInviteRequest.Header.ProxyReceivedOn;
if (!nonInviteRequest.Header.ProxyReceivedFrom.IsNullOrBlank())
{
// Setting the Proxy-ReceivedOn header is how an upstream proxy will let an agent know it should mangle the contact.
// Don't mangle private contacts if there is a Record-Route header. If a proxy is putting private IP's in a Record-Route header that's its problem.
if (RouteSet == null && IPSocket.IsPrivateAddress(RemoteTarget.Host))
{
SIPEndPoint remoteUASIPEndPoint = SIPEndPoint.ParseSIPEndPoint(nonInviteRequest.Header.ProxyReceivedFrom);
RemoteTarget.Host = remoteUASIPEndPoint.GetIPEndPoint().ToString();
}
}
}
/// <summary>
/// Ideally sends on the web socket channel should specify the connection ID. But if there's
/// a good reason not to we can check if there is an existing client connection with the
/// requested remote end point and use it.
/// </summary>
/// <param name="destinationEndPoint">The remote destination end point to send the data to.</param>
/// <param name="buffer">The data to send.</param>
/// <param name="connectionIDHint">The ID of the specific web socket connection to try and send the message on.</param>
/// <returns>If no errors SocketError.Success otherwise an error value.</returns>
public override async Task <SocketError> SendAsync(SIPEndPoint destinationEndPoint, byte[] buffer, string connectionIDHint)
{
if (destinationEndPoint == null)
{
throw new ApplicationException("An empty destination was specified to Send in SIPWebSocketChannel.");
}
else if (buffer == null || buffer.Length == 0)
{
throw new ArgumentException("buffer", "The buffer must be set and non empty for Send in SIPWebSocketChannel.");
}
try
{
var ingressClient = GetIngressConnection(destinationEndPoint.GetIPEndPoint(), connectionIDHint);
// And lastly if we now have a valid web socket then send.
if (ingressClient != null)
{
await Task.Run(() => ingressClient.Send(buffer, 0, buffer.Length)).ConfigureAwait(false);
return(SocketError.Success);
}
else
{
return(SocketError.ConnectionReset);
}
}
catch (SocketException sockExcp)
{
return(sockExcp.SocketErrorCode);
}
}
/// <summary>
/// Attempts to extract SIP messages from the data that has been received on the SIP stream connection.
/// </summary>
/// <param name="recvChannel">The receiving SIP channel.</param>
/// <param name="buffer">The buffer holding the current data from the stream. Note that the buffer can
/// stretch over multiple receives.</param>
/// <param name="bytesRead">The bytes that were read by the latest receive operation (the new bytes available).</param>
public void ExtractSIPMessages(SIPChannel recvChannel, byte[] buffer, int bytesRead)
{
RecvEndPosn += bytesRead;
int bytesSkipped = 0;
byte[] sipMsgBuffer = SIPMessageBuffer.ParseSIPMessageFromStream(buffer, RecvStartPosn, RecvEndPosn, m_sipEncoding, out bytesSkipped);
while (sipMsgBuffer != null)
{
// A SIP message is available.
if (SIPMessageReceived != null)
{
LastTransmission = DateTime.Now;
SIPEndPoint localEndPoint = new SIPEndPoint(ConnectionProtocol, StreamSocket.LocalEndPoint as IPEndPoint, recvChannel.ID, ConnectionID);
SIPEndPoint remoteEndPoint = new SIPEndPoint(ConnectionProtocol, RemoteSIPEndPoint.GetIPEndPoint(), recvChannel.ID, ConnectionID);
SIPMessageReceived(recvChannel, localEndPoint, remoteEndPoint, sipMsgBuffer);
}
RecvStartPosn += (sipMsgBuffer.Length + bytesSkipped);
if (RecvStartPosn == RecvEndPosn)
{
// All data has been successfully extracted from the receive buffer.
RecvStartPosn = RecvEndPosn = 0;
break;
}
else
{
// Try and extract another SIP message from the receive buffer.
sipMsgBuffer = SIPMessageBuffer.ParseSIPMessageFromStream(buffer, RecvStartPosn, RecvEndPosn, m_sipEncoding, out bytesSkipped);
}
}
}
/// <summary>
/// Attempts to send data to the remote end point over a reliable connection. If an existing
/// connection exists it will be used otherwise an attempt will be made to establish a new connection.
/// </summary>
/// <param name="dstSIPEndPoint">The remote SIP end point to send the reliable data to.</param>
/// <param name="buffer">The data to send.</param>
/// <param name="serverCertificateName">Optional. Only relevant for SSL streams. The common name
/// that is expected for the remote SSL server.</param>
/// <param name="connectionIDHint">Optional. The ID of the specific TCP connection to try and the send the message on.</param>
/// <returns>If no errors SocketError.Success otherwise an error value.</returns>
public override Task <SocketError> SendSecureAsync(SIPEndPoint dstSIPEndPoint, byte[] buffer, string serverCertificateName, string connectionIDHint)
{
try
{
IPEndPoint dstEndPoint = dstSIPEndPoint?.GetIPEndPoint();
if (dstEndPoint == null)
{
throw new ArgumentException("dstEndPoint", "An empty destination was specified to Send in SIPTCPChannel.");
}
if (buffer == null || buffer.Length == 0)
{
throw new ApplicationException("An empty buffer was specified to Send in SIPTCPChannel.");
}
else if (DisableLocalTCPSocketsCheck == false && m_localTCPSockets.Contains(dstEndPoint.ToString()))
{
logger.LogWarning($"SIP {ProtDescr} Channel blocked Send to {dstEndPoint} as it was identified as a locally hosted {ProtDescr} socket.\r\n" + Encoding.UTF8.GetString(buffer));
throw new ApplicationException($"A Send call was blocked in SIP {ProtDescr} Channel due to the destination being another local TCP socket.");
}
else
{
// Lookup a client socket that is connected to the destination. If it does not exist attempt to connect a new one.
SIPStreamConnection sipStreamConn = null;
if (connectionIDHint != null)
{
m_connections.TryGetValue(connectionIDHint, out sipStreamConn);
}
if (sipStreamConn == null && HasConnection(dstSIPEndPoint))
{
sipStreamConn = m_connections.Where(x => x.Value.RemoteEndPoint.Equals(dstEndPoint)).First().Value;
}
if (sipStreamConn != null)
{
SendOnConnected(sipStreamConn, buffer);
return(Task.FromResult(SocketError.Success));
}
else
{
return(ConnectClientAsync(dstEndPoint, buffer, serverCertificateName));
}
}
}
catch (SocketException sockExcp)
{
return(Task.FromResult(sockExcp.SocketErrorCode));
}
catch (ApplicationException)
{
throw;
}
catch (Exception excp)
{
logger.LogError($"Exception SIPTCPChannel Send (sendto=> {dstSIPEndPoint}. {excp.Message}");
throw;
}
}
private void SIPTCPMessageReceived(SIPChannel channel, SIPEndPoint remoteEndPoint, byte[] buffer)
{
if (m_connectionFailures.ContainsKey(remoteEndPoint.GetIPEndPoint().ToString()))
{
m_connectionFailures.Remove(remoteEndPoint.GetIPEndPoint().ToString());
}
if (m_connectionFailureStrikes.ContainsKey(remoteEndPoint.GetIPEndPoint().ToString()))
{
m_connectionFailureStrikes.Remove(remoteEndPoint.GetIPEndPoint().ToString());
}
if (SIPMessageReceived != null)
{
SIPMessageReceived(channel, remoteEndPoint, buffer);
}
}
/// <summary>
/// Get the local SIPEndPoint this channel will use for communicating with the destination SIP end point.
/// </summary>
/// <param name="dstEndPoint">The destination SIP end point.</param>
/// <returns>The local SIP end points this channel selects to use for connecting to the destination.</returns>
internal override SIPEndPoint GetLocalSIPEndPointForDestination(SIPEndPoint dstEndPoint)
{
IPAddress dstAddress = dstEndPoint.GetIPEndPoint().Address;
IPAddress localAddress = GetLocalIPAddressForDestination(dstAddress);
// Need to return ws or wss to match the destination.
return(new SIPEndPoint(dstEndPoint.Protocol, localAddress, Port, ID, null));
}
/// <summary>
/// Checks whether the client web socket SIP channel has a connection to the requested server end point.
/// </summary>
public override bool HasConnection(SIPEndPoint serverEndPoint)
{
string uriPrefix = (serverEndPoint.Protocol == SIPProtocolsEnum.wss) ? WEB_SOCKET_SECURE_URI_PREFIX : WEB_SOCKET_URI_PREFIX;
var serverUri = new Uri($"{uriPrefix}{serverEndPoint.GetIPEndPoint()}");
string connectionID = GetConnectionID(serverUri);
return(m_egressConnections.ContainsKey(connectionID));
}
/// <summary>
/// This constructor is used by client user agents or SIP elements acting in a client user agent role. When
/// acting as a client user agent the local fields are contained in the From header and the remote fields are
/// in the To header.
/// </summary>
public SIPDialogue(
UACInviteTransaction uacInviteTransaction,
string owner,
string adminMemberId)
{
Id = Guid.NewGuid();
CallId = uacInviteTransaction.TransactionRequest.Header.CallId;
RouteSet =
(uacInviteTransaction.TransactionFinalResponse != null &&
uacInviteTransaction.TransactionFinalResponse.Header.RecordRoutes != null)
? uacInviteTransaction.TransactionFinalResponse.Header.RecordRoutes.Reversed()
: null;
LocalUserField = uacInviteTransaction.TransactionFinalResponse.Header.From.FromUserField;
LocalTag = uacInviteTransaction.TransactionFinalResponse.Header.From.FromTag;
RemoteUserField = uacInviteTransaction.TransactionFinalResponse.Header.To.ToUserField;
RemoteTag = uacInviteTransaction.TransactionFinalResponse.Header.To.ToTag;
CSeq = uacInviteTransaction.TransactionRequest.Header.CSeq;
CDRId = (uacInviteTransaction.CDR != null) ? uacInviteTransaction.CDR.CDRId : Guid.Empty;
Owner = owner;
AdminMemberId = adminMemberId;
ContentType = uacInviteTransaction.TransactionRequest.Header.ContentType;
SDP = uacInviteTransaction.TransactionRequest.Body;
RemoteSDP = uacInviteTransaction.TransactionFinalResponse.Body;
Inserted = DateTimeOffset.UtcNow;
Direction = SIPCallDirection.Out;
// Set the dialogue remote target and take care of mangling if an upstream proxy has indicated it's required.
if (uacInviteTransaction.TransactionFinalResponse != null)
{
RemoteTarget = new SIPURI(uacInviteTransaction.TransactionRequest.URI.Scheme,
uacInviteTransaction.TransactionFinalResponse.RemoteSIPEndPoint.CopyOf());
}
else
{
RemoteTarget = new SIPURI(uacInviteTransaction.TransactionRequest.URI.Scheme,
uacInviteTransaction.TransactionRequest.RemoteSIPEndPoint.CopyOf());
}
ProxySendFrom = uacInviteTransaction.TransactionFinalResponse.Header.ProxyReceivedOn;
if (uacInviteTransaction.TransactionFinalResponse.Header.Contact != null &&
uacInviteTransaction.TransactionFinalResponse.Header.Contact.Count > 0)
{
RemoteTarget = uacInviteTransaction.TransactionFinalResponse.Header.Contact[0].ContactURI.CopyOf();
if (!uacInviteTransaction.TransactionFinalResponse.Header.ProxyReceivedFrom.IsNullOrBlank())
{
// Setting the Proxy-ReceivedOn header is how an upstream proxy will let an agent know it should mangle the contact.
// Don't mangle private contacts if there is a Record-Route header. If a proxy is putting private IP's in a Record-Route header that's its problem.
if (RouteSet == null && IPSocket.IsPrivateAddress(RemoteTarget.Host))
{
SIPEndPoint remoteUASSIPEndPoint =
SIPEndPoint.ParseSIPEndPoint(uacInviteTransaction.TransactionFinalResponse.Header
.ProxyReceivedFrom);
RemoteTarget.Host = remoteUASSIPEndPoint.GetIPEndPoint().ToString();
}
}
}
}
public SIPURI(SIPSchemesEnum scheme, SIPEndPoint sipEndPoint)
{
Scheme = scheme;
Host = sipEndPoint.GetIPEndPoint().ToString();
if (sipEndPoint.Protocol != SIPProtocolsEnum.udp && scheme != SIPSchemesEnum.sips)
{
Parameters.Set(m_uriParamTransportKey, sipEndPoint.Protocol.ToString());
}
}
private void UACInviteTransaction_TransactionFinalResponseReceived(SIPEndPoint localSIPEndPoint, SIPEndPoint remoteEndPoint, SIPTransaction sipTransaction, SIPResponse sipResponse)
{
try
{
// BranchId for 2xx responses needs to be a new one, non-2xx final responses use same one as original request.
SIPRequest ackRequest = null;
if (sipResponse.StatusCode >= 200 && sipResponse.StatusCode < 299)
{
if (sipResponse.Header.To != null)
{
m_remoteTag = sipResponse.Header.To.ToTag;
}
SIPURI ackURI = m_transactionRequest.URI;
if (sipResponse.Header.Contact != null && sipResponse.Header.Contact.Count > 0)
{
ackURI = sipResponse.Header.Contact[0].ContactURI;
// Don't mangle private contacts if there is a Record-Route header. If a proxy is putting private IP's in a Record-Route header that's its problem.
if ((sipResponse.Header.RecordRoutes == null || sipResponse.Header.RecordRoutes.Length == 0) &&
IPSocket.IsPrivateAddress(ackURI.Host) && !sipResponse.Header.ProxyReceivedFrom.IsNullOrBlank())
{
// Setting the Proxy-ReceivedOn header is how an upstream proxy will let an agent know it should mangle the contact.
SIPEndPoint remoteUASSIPEndPoint = SIPEndPoint.ParseSIPEndPoint(sipResponse.Header.ProxyReceivedFrom);
ackURI.Host = remoteUASSIPEndPoint.GetIPEndPoint().ToString();
}
}
// ACK for 2xx response needs to be a new transaction and gets routed based on SIP request fields.
ackRequest = GetNewTransactionACKRequest(sipResponse, ackURI, LocalSIPEndPoint);
base.SendRequest(ackRequest);
}
else
{
// ACK for non 2xx response is part of the INVITE transaction and gets routed to the same endpoint as the INVITE.
ackRequest = GetInTransactionACKRequest(sipResponse, m_transactionRequest.URI, LocalSIPEndPoint);
base.SendRequest(RemoteEndPoint, ackRequest);
}
if (UACInviteTransactionFinalResponseReceived != null)
{
UACInviteTransactionFinalResponseReceived(localSIPEndPoint, remoteEndPoint, sipTransaction, sipResponse);
}
if (CDR != null)
{
SIPEndPoint localEP = SIPEndPoint.TryParse(sipResponse.Header.ProxyReceivedOn) ?? localSIPEndPoint;
SIPEndPoint remoteEP = SIPEndPoint.TryParse(sipResponse.Header.ProxyReceivedFrom) ?? remoteEndPoint;
CDR.Answered(sipResponse.StatusCode, sipResponse.Status, sipResponse.ReasonPhrase, localEP, remoteEP);
}
}
catch (Exception excp)
{
logger.Error("Exception UACInviteTransaction_TransactionFinalResponseReceived. " + excp.Message);
}
}
public override Task <SocketError> SendAsync(SIPEndPoint dstEndPoint, byte[] buffer, string connectionIDHint)
{
if (dstEndPoint == null)
{
throw new ArgumentException("dstEndPoint",
"An empty destination was specified to Send in SIPUDPChannel.");
}
else if (buffer == null || buffer.Length == 0)
{
throw new ArgumentException("buffer",
"The buffer must be set and non empty for Send in SIPUDPChannel.");
}
try
{
IPEndPoint dstIPEndPoint = dstEndPoint.GetIPEndPoint();
if (m_sendFailures.ContainsKey(dstEndPoint.GetIPEndPoint()))
{
return(Task.FromResult(SocketError.ConnectionRefused));
}
else
{
m_udpSocket.BeginSendTo(buffer, 0, buffer.Length, SocketFlags.None, dstIPEndPoint, EndSendTo,
dstEndPoint);
return(Task.FromResult(SocketError.Success));
}
}
catch (ObjectDisposedException) // Thrown when socket is closed. Can be safely ignored.
{
return(Task.FromResult(SocketError.Disconnecting));
}
catch (SocketException sockExcp)
{
return(Task.FromResult(sockExcp.SocketErrorCode));
}
catch (Exception excp)
{
Logger.Logger.Error($"Exception SIPUDPChannel.SendAsync. ->{excp}");
return(Task.FromResult(SocketError.Fault));
}
}
public SIPUDPChannel(IPEndPoint endPoint)
{
m_localSIPEndPoint = new SIPEndPoint(SIPProtocolsEnum.udp, endPoint);
m_sipConn = new UdpClient(m_localSIPEndPoint.GetIPEndPoint());
if (m_localSIPEndPoint.Port == 0)
{
m_localSIPEndPoint = new SIPEndPoint(SIPProtocolsEnum.udp, (IPEndPoint)m_sipConn.Client.LocalEndPoint);
}
logger.LogDebug("SIPUDPChannel listener created " + m_localSIPEndPoint.GetIPEndPoint() + ".");
m_mainLoop = Task.Run(Listen);
}
/// <summary>
/// Sends the ACK request as a new transaction. This is required for 2xx responses.
/// </summary>
/// <param name="content">The optional content body for the ACK request.</param>
/// <param name="contentType">The optional content type.</param>
private SIPRequest Get2xxAckRequest(string content, string contentType)
{
try
{
var sipResponse = m_transactionFinalResponse;
if (sipResponse.Header.To != null)
{
m_remoteTag = sipResponse.Header.To.ToTag;
}
SIPURI ackURI = m_transactionRequest.URI;
if (sipResponse.Header.Contact != null && sipResponse.Header.Contact.Count > 0)
{
ackURI = sipResponse.Header.Contact[0].ContactURI;
// Don't mangle private contacts if there is a Record-Route header. If a proxy is putting private IP's in a Record-Route header that's its problem.
if ((sipResponse.Header.RecordRoutes == null || sipResponse.Header.RecordRoutes.Length == 0) &&
IPSocket.IsPrivateAddress(ackURI.Host) &&
!sipResponse.Header.ProxyReceivedFrom.IsNullOrBlank())
{
// Setting the Proxy-ReceivedOn header is how an upstream proxy will let an agent know it should mangle the contact.
SIPEndPoint remoteUASSIPEndPoint =
SIPEndPoint.ParseSIPEndPoint(sipResponse.Header.ProxyReceivedFrom);
ackURI.Host = remoteUASSIPEndPoint.GetIPEndPoint().ToString();
}
}
// ACK for 2xx response needs to be a new transaction and gets routed based on SIP request fields.
var ackRequest = GetNewTransactionAcknowledgeRequest(SIPMethodsEnum.ACK, sipResponse, ackURI);
if (content.NotNullOrBlank())
{
ackRequest.Body = content;
ackRequest.Header.ContentLength = ackRequest.Body.Length;
ackRequest.Header.ContentType = contentType;
}
return(ackRequest);
}
catch (Exception excp)
{
Logger.Logger.Error($"Exception Get2xxAckRequest. ->{excp.Message}");
throw excp;
}
}
/// <summary>
/// This constructor is used by server user agents or SIP elements acting in a server user agent role. When
/// acting as a server user agent the local fields are contained in the To header and the remote fields are
/// in the From header.
/// </summary>
public SIPDialogue(
UASInviteTransaction uasInviteTransaction)
{
Id = Guid.NewGuid();
CallId = uasInviteTransaction.TransactionRequest.Header.CallId;
//RouteSet = (uasInviteTransaction.TransactionFinalResponse != null && uasInviteTransaction.TransactionFinalResponse.Header.RecordRoutes != null) ? uasInviteTransaction.TransactionFinalResponse.Header.RecordRoutes.Reversed() : null;
RouteSet = (uasInviteTransaction.TransactionFinalResponse != null && uasInviteTransaction.TransactionFinalResponse.Header.RecordRoutes != null) ? uasInviteTransaction.TransactionFinalResponse.Header.RecordRoutes : null;
LocalUserField = uasInviteTransaction.TransactionFinalResponse.Header.To.ToUserField;
LocalTag = uasInviteTransaction.TransactionFinalResponse.Header.To.ToTag;
RemoteUserField = uasInviteTransaction.TransactionFinalResponse.Header.From.FromUserField;
RemoteTag = uasInviteTransaction.TransactionFinalResponse.Header.From.FromTag;
CSeq = uasInviteTransaction.TransactionRequest.Header.CSeq;
CDRId = uasInviteTransaction.CDR != null ? uasInviteTransaction.CDR.CDRId : Guid.Empty;
ContentType = uasInviteTransaction.TransactionFinalResponse.Header.ContentType;
SDP = uasInviteTransaction.TransactionFinalResponse.Body;
RemoteSDP = uasInviteTransaction.TransactionRequest.Body ?? uasInviteTransaction.AckRequest.Body;
Inserted = DateTime.UtcNow;
Direction = SIPCallDirection.In;
if (uasInviteTransaction.m_gotPrack)
{
CSeq++;
}
RemoteTarget = new SIPURI(uasInviteTransaction.TransactionRequest.URI.Scheme, uasInviteTransaction.TransactionRequest.RemoteSIPEndPoint.CopyOf());
ProxySendFrom = uasInviteTransaction.TransactionRequest.Header.ProxyReceivedOn;
if (uasInviteTransaction.TransactionRequest.Header.Contact != null && uasInviteTransaction.TransactionRequest.Header.Contact.Count > 0)
{
RemoteTarget = uasInviteTransaction.TransactionRequest.Header.Contact[0].ContactURI.CopyOf();
if (!uasInviteTransaction.TransactionRequest.Header.ProxyReceivedFrom.IsNullOrBlank())
{
// Setting the Proxy-ReceivedOn header is how an upstream proxy will let an agent know it should mangle the contact.
// Don't mangle private contacts if there is a Record-Route header. If a proxy is putting private IP's in a Record-Route header that's its problem.
if (RouteSet == null && IPSocket.IsPrivateAddress(RemoteTarget.Host))
{
SIPEndPoint remoteUASSIPEndPoint = SIPEndPoint.ParseSIPEndPoint(uasInviteTransaction.TransactionRequest.Header.ProxyReceivedFrom);
RemoteTarget.Host = remoteUASSIPEndPoint.GetIPEndPoint().ToString();
}
}
}
}
public void Send2xxAckRequest(string content, string contentType)
{
var sipResponse = m_transactionFinalResponse;
if (sipResponse.Header.To != null)
{
m_remoteTag = sipResponse.Header.To.ToTag;
}
SIPURI ackURI = m_transactionRequest.URI;
if (sipResponse.Header.Contact != null && sipResponse.Header.Contact.Count > 0)
{
ackURI = sipResponse.Header.Contact[0].ContactURI;
// Don't mangle private contacts if there is a Record-Route header. If a proxy is putting private IP's in a Record-Route header that's its problem.
if ((sipResponse.Header.RecordRoutes == null || sipResponse.Header.RecordRoutes.Length == 0) &&
IPSocket.IsPrivateAddress(ackURI.Host) && !sipResponse.Header.ProxyReceivedFrom.IsNullOrBlank())
{
// Setting the Proxy-ReceivedOn header is how an upstream proxy will let an agent know it should mangle the contact.
SIPEndPoint remoteUASSIPEndPoint = SIPEndPoint.ParseSIPEndPoint(sipResponse.Header.ProxyReceivedFrom);
ackURI.Host = remoteUASSIPEndPoint.GetIPEndPoint().ToString();
}
}
// ACK for 2xx response needs to be a new transaction and gets routed based on SIP request fields.
var ackRequest = GetNewTransactionACKRequest(sipResponse, ackURI, LocalSIPEndPoint);
if (content.NotNullOrBlank())
{
ackRequest.Body = content;
ackRequest.Header.ContentLength = ackRequest.Body.Length;
ackRequest.Header.ContentType = contentType;
}
base.SendRequest(ackRequest);
}
/// <summary>
/// Generates the ACK or PRACK request to acknowledge a response. This method generates the ACK requests
/// for INVITE 2xx and PRACK for 1xx responses. The request needs to be sent as part of a new transaction.
/// Note for constructing the ACK for INVITE >= 300 responses is <seealso cref="GetInTransactionACKRequest"/>.
/// </summary>
/// <param name="ackResponse">The response being acknowledged.</param>
/// <param name="ackMethod">The acknowledgement request method, either ACK or PRACK.</param>
/// <param name="cseq">The SIP CSeq header value to set on the acknowledge request.</param>
/// <param name="content">The optional content body for the ACK request.</param>
/// <param name="contentType">The optional content type.</param>
private SIPRequest GetAcknowledgeRequest(SIPResponse ackResponse, SIPMethodsEnum ackMethod, int cseq, string content, string contentType)
{
if (ackResponse.Header.To != null)
{
m_remoteTag = ackResponse.Header.To.ToTag;
}
SIPURI requestURI = m_transactionRequest.URI.CopyOf();
if (ackResponse.Header.Contact?.Count > 0)
{
requestURI = ackResponse.Header.Contact[0].ContactURI;
// Don't mangle private contacts if there is a Record-Route header. If a proxy is putting private IP's
// in a Record-Route header that's its problem.
if ((ackResponse.Header.RecordRoutes == null || ackResponse.Header.RecordRoutes.Length == 0) &&
IPSocket.IsPrivateAddress(requestURI.Host) && !ackResponse.Header.ProxyReceivedFrom.IsNullOrBlank())
{
// Setting the Proxy-ReceivedOn header is how an upstream proxy will let an agent know it should
// mangle the contact.
SIPEndPoint remoteUASSIPEndPoint = SIPEndPoint.ParseSIPEndPoint(ackResponse.Header.ProxyReceivedFrom);
requestURI.Host = remoteUASSIPEndPoint.GetIPEndPoint().ToString();
}
}
// ACK for 2xx response needs to be a new transaction and gets routed based on SIP request fields.
var ackRequest = GetNewTxACKRequest(ackMethod, cseq, ackResponse, requestURI);
if (content.NotNullOrBlank())
{
ackRequest.Body = content;
ackRequest.Header.ContentLength = ackRequest.Body.Length;
ackRequest.Header.ContentType = contentType;
}
return(ackRequest);
}
public void AckRecognitionUnitTest()
{
SIPTransport clientTransport = null;
SIPTransport serverTransport = null;
try
{
SIPTransactionEngine clientEngine = new SIPTransactionEngine(); // Client side of the INVITE.
SIPEndPoint clientEndPoint = new SIPEndPoint(SIPProtocolsEnum.udp, new IPEndPoint(IPAddress.Loopback, 12013));
clientTransport = new SIPTransport(MockSIPDNSManager.Resolve, clientEngine, new SIPUDPChannel(clientEndPoint.GetIPEndPoint()), false);
SetTransportTraceEvents(clientTransport);
SIPTransactionEngine serverEngine = new SIPTransactionEngine(); // Server side of the INVITE.
UASInviteTransaction serverTransaction = null;
SIPEndPoint serverEndPoint = new SIPEndPoint(new IPEndPoint(IPAddress.Loopback, 12014));
serverTransport = new SIPTransport(MockSIPDNSManager.Resolve, serverEngine, new SIPUDPChannel(serverEndPoint.GetIPEndPoint()), false);
SetTransportTraceEvents(serverTransport);
serverTransport.SIPTransportRequestReceived += (localEndPoint, remoteEndPoint, sipRequest) =>
{
Console.WriteLine("Server Transport Request In: " + sipRequest.Method + ".");
serverTransaction = serverTransport.CreateUASTransaction(sipRequest, remoteEndPoint, localEndPoint, null);
SetTransactionTraceEvents(serverTransaction);
serverTransaction.GotRequest(localEndPoint, remoteEndPoint, sipRequest);
};
SIPURI dummyURI = SIPURI.ParseSIPURI("sip:dummy@" + serverEndPoint);
SIPRequest inviteRequest = GetDummyINVITERequest(dummyURI);
inviteRequest.LocalSIPEndPoint = clientTransport.GetDefaultTransportContact(SIPProtocolsEnum.udp);
// Send the invite to the server side.
UACInviteTransaction clientTransaction = new UACInviteTransaction(clientTransport, inviteRequest, serverEndPoint, clientEndPoint, null);
SetTransactionTraceEvents(clientTransaction);
clientEngine.AddTransaction(clientTransaction);
clientTransaction.SendInviteRequest(serverEndPoint, inviteRequest);
Thread.Sleep(500);
Assert.IsTrue(clientTransaction.TransactionState == SIPTransactionStatesEnum.Completed, "Client transaction in incorrect state.");
Assert.IsTrue(serverTransaction.TransactionState == SIPTransactionStatesEnum.Confirmed, "Server transaction in incorrect state.");
}
finally
{
if (clientTransport != null)
{
clientTransport.Shutdown();
}
if (serverTransport != null)
{
serverTransport.Shutdown();
}
}
}
/// <summary>
/// Checks whether there is an existing client web socket connection for a remote end point.
/// </summary>
/// <param name="remoteEndPoint">The remote end point to check for an existing connection.</param>
/// <returns>True if there is a connection or false if not.</returns>
public override bool HasConnection(SIPEndPoint remoteEndPoint)
{
return(m_ingressConnections.Any(x => x.Value.Context.UserEndPoint.Equals(remoteEndPoint.GetIPEndPoint())));
}
private void SIPTCPMessageReceived(SIPChannel channel, SIPEndPoint remoteEndPoint, byte[] buffer)
{
if (m_connectionFailures.ContainsKey(remoteEndPoint.GetIPEndPoint().ToString()))
{
m_connectionFailures.Remove(remoteEndPoint.GetIPEndPoint().ToString());
}
if (m_connectionFailureStrikes.ContainsKey(remoteEndPoint.GetIPEndPoint().ToString()))
{
m_connectionFailureStrikes.Remove(remoteEndPoint.GetIPEndPoint().ToString());
}
if (SIPMessageReceived != null)
{
SIPMessageReceived(channel, remoteEndPoint, buffer);
}
}
public SIPURI(SIPSchemesEnum scheme, SIPEndPoint sipEndPoint)
{
Scheme = scheme;
Host = sipEndPoint.GetIPEndPoint().ToString();
if (sipEndPoint.Protocol != SIPProtocolsEnum.udp)
{
Parameters.Set(m_uriParamTransportKey, sipEndPoint.Protocol.ToString());
}
}
/// <summary>
/// Used to create a SIP response when it was not possible to parse the incoming SIP request.
/// </summary>
public SIPResponse GetResponse(SIPEndPoint localSIPEndPoint, SIPEndPoint remoteEndPoint, SIPResponseStatusCodesEnum responseCode, string reasonPhrase)
{
try
{
if (localSIPEndPoint == null)
{
localSIPEndPoint = GetDefaultSIPEndPoint();
}
SIPResponse response = new SIPResponse(responseCode, reasonPhrase, localSIPEndPoint);
SIPSchemesEnum sipScheme = (localSIPEndPoint.Protocol == SIPProtocolsEnum.tls) ? SIPSchemesEnum.sips : SIPSchemesEnum.sip;
SIPFromHeader from = new SIPFromHeader(null, new SIPURI(sipScheme, localSIPEndPoint), null);
SIPToHeader to = new SIPToHeader(null, new SIPURI(sipScheme, localSIPEndPoint), null);
int cSeq = 1;
string callId = CallProperties.CreateNewCallId();
response.Header = new SIPHeader(from, to, cSeq, callId);
response.Header.CSeqMethod = SIPMethodsEnum.NONE;
response.Header.Vias.PushViaHeader(new SIPViaHeader(new SIPEndPoint(localSIPEndPoint.Protocol, remoteEndPoint.GetIPEndPoint()), CallProperties.CreateBranchId()));
response.Header.MaxForwards = Int32.MinValue;
response.Header.Allow = ALLOWED_SIP_METHODS;
return response;
}
catch (Exception excp)
{
logger.Error("Exception SIPTransport GetResponse. " + excp.Message);
throw;
}
}
/// <summary>
/// Allows raw bytes to be sent from one of the SIPTransport sockets. This should not be used for SIP payloads and instead is
/// provided to allow other types of payloads to be multi-plexed on the SIP socket. Examples are sending NAT keep alives and
/// STUN responses where it's useful to use the same socket as the SIP packets.
/// </summary>
public void SendRaw(SIPEndPoint localSIPEndPoint, SIPEndPoint destinationEndPoint, byte[] buffer)
{
if (destinationEndPoint != null && destinationEndPoint.Address.Equals(BlackholeAddress))
{
// Ignore packet, it's destined for the blackhole.
return;
}
if (m_sipChannels.Count == 0)
{
throw new ApplicationException("No channels are configured in the SIP transport layer. The data could not be sent.");
}
SIPChannel sendSIPChannel = FindSIPChannel(localSIPEndPoint);
if (sendSIPChannel != null)
{
sendSIPChannel.Send(destinationEndPoint.GetIPEndPoint(), buffer);
}
else
{
logger.Warn("No SIPChannel could be found for " + localSIPEndPoint + " in SIPTransport.SendRaw, sending to " + destinationEndPoint.ToString() + ".");
//logger.Warn(Encoding.UTF8.GetString(buffer));
}
}
private void SendResponse(SIPChannel sipChannel, SIPEndPoint dstEndPoint, SIPResponse sipResponse)
{
try
{
if (dstEndPoint != null && dstEndPoint.Address.Equals(BlackholeAddress))
{
// Ignore packet, it's destined for the blackhole.
return;
}
if (m_sipChannels.Count == 0)
{
throw new ApplicationException("No channels are configured in the SIP transport layer. The response could not be sent.");
}
sipResponse.Header.ContentLength = (sipResponse.Body.NotNullOrBlank()) ? Encoding.UTF8.GetByteCount(sipResponse.Body) : 0;
sipChannel.Send(dstEndPoint.GetIPEndPoint(), Encoding.UTF8.GetBytes(sipResponse.ToString()));
if (SIPRequestOutTraceEvent != null)
{
FireSIPResponseOutTraceEvent(sipChannel.SIPChannelEndPoint, dstEndPoint, sipResponse);
}
}
catch (ApplicationException appExcp)
{
logger.Warn("ApplicationException SIPTransport SendResponse. " + appExcp.Message);
}
}
private void SIPMessageReceived(SIPChannel sipChannel, SIPEndPoint remoteEndPoint, byte[] buffer)
{
string rawSIPMessage = null;
try
{
if (buffer != null && buffer.Length > 0)
{
if ((buffer[0] == 0x0 || buffer[0] == 0x1) && buffer.Length >= 20)
{
// Treat any messages that cannot be SIP as STUN requests.
if (STUNRequestReceived != null)
{
STUNRequestReceived(sipChannel.SIPChannelEndPoint.GetIPEndPoint(), remoteEndPoint.GetIPEndPoint(), buffer, buffer.Length);
#if !SILVERLIGHT
if (PerformanceMonitorPrefix != null)
{
SIPSorceryPerformanceMonitor.IncrementCounter(PerformanceMonitorPrefix + SIPSorceryPerformanceMonitor.SIP_TRANSPORT_STUN_REQUESTS_PER_SECOND_SUFFIX);
}
#endif
}
}
else
{
// Treat all messages that don't match STUN requests as SIP.
if (buffer.Length > SIPConstants.SIP_MAXIMUM_RECEIVE_LENGTH)
{
string rawErrorMessage = Encoding.UTF8.GetString(buffer, 0, 1024) + "\r\n..truncated";
FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "SIP message too large, " + buffer.Length + " bytes, maximum allowed is " + SIPConstants.SIP_MAXIMUM_RECEIVE_LENGTH + " bytes.", SIPValidationFieldsEnum.Request, rawErrorMessage);
SIPResponse tooLargeResponse = GetResponse(sipChannel.SIPChannelEndPoint, remoteEndPoint, SIPResponseStatusCodesEnum.MessageTooLarge, null);
SendResponse(tooLargeResponse);
#if !SILVERLIGHT
if (PerformanceMonitorPrefix != null)
{
SIPSorceryPerformanceMonitor.IncrementCounter(PerformanceMonitorPrefix + SIPSorceryPerformanceMonitor.SIP_TRANSPORT_SIP_BAD_MESSAGES_PER_SECOND_SUFFIX);
}
#endif
}
else
{
rawSIPMessage = Encoding.UTF8.GetString(buffer, 0, buffer.Length);
if (rawSIPMessage.IsNullOrBlank())
{
// An emptry transmission has been received. More than likely this is a NAT keep alive and can be disregarded.
//FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "No printable characters, length " + buffer.Length + " bytes.", SIPValidationFieldsEnum.Unknown, null);
#if !SILVERLIGHT
if (PerformanceMonitorPrefix != null)
{
// SIPSorceryPerformanceMonitor.IncrementCounter(PerformanceMonitorPrefix + SIPSorceryPerformanceMonitor.SIP_TRANSPORT_SIP_BAD_MESSAGES_PER_SECOND_SUFFIX);
}
#endif
return;
}
else if (!rawSIPMessage.Contains("SIP"))
{
FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "Missing SIP string.", SIPValidationFieldsEnum.NoSIPString, rawSIPMessage);
#if !SILVERLIGHT
if (PerformanceMonitorPrefix != null)
{
SIPSorceryPerformanceMonitor.IncrementCounter(PerformanceMonitorPrefix + SIPSorceryPerformanceMonitor.SIP_TRANSPORT_SIP_BAD_MESSAGES_PER_SECOND_SUFFIX);
}
#endif
return;
}
SIPMessage sipMessage = SIPMessage.ParseSIPMessage(rawSIPMessage, sipChannel.SIPChannelEndPoint, remoteEndPoint);
if (sipMessage != null)
{
if (sipMessage.SIPMessageType == SIPMessageTypesEnum.Response)
{
#region SIP Response.
try
{
#if !SILVERLIGHT
if (PerformanceMonitorPrefix != null)
{
SIPSorceryPerformanceMonitor.IncrementCounter(PerformanceMonitorPrefix + SIPSorceryPerformanceMonitor.SIP_TRANSPORT_SIP_RESPONSES_PER_SECOND_SUFFIX);
}
#endif
SIPResponse sipResponse = SIPResponse.ParseSIPResponse(sipMessage);
if (SIPResponseInTraceEvent != null)
{
FireSIPResponseInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipResponse);
}
if (m_transactionEngine != null && m_transactionEngine.Exists(sipResponse))
{
SIPTransaction transaction = m_transactionEngine.GetTransaction(sipResponse);
if (transaction.TransactionState != SIPTransactionStatesEnum.Completed)
{
transaction.DeliveryPending = false;
if (m_reliableTransmissions.ContainsKey(transaction.TransactionId))
{
lock (m_reliableTransmissions)
{
m_reliableTransmissions.Remove(transaction.TransactionId);
}
}
}
transaction.GotResponse(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipResponse);
}
else if (SIPTransportResponseReceived != null)
{
SIPTransportResponseReceived(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipResponse);
}
}
catch (SIPValidationException sipValidationException)
{
//logger.Warn("Invalid SIP response from " + sipMessage.ReceivedFrom + ", " + sipResponse.ValidationError + " , ignoring.");
//logger.Warn(sipMessage.RawMessage);
FireSIPBadResponseInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipMessage.RawMessage, sipValidationException.SIPErrorField, sipMessage.RawMessage);
}
#endregion
}
else
{
#region SIP Request.
#if !SILVERLIGHT
if (PerformanceMonitorPrefix != null)
{
SIPSorceryPerformanceMonitor.IncrementCounter(PerformanceMonitorPrefix + SIPSorceryPerformanceMonitor.SIP_TRANSPORT_SIP_REQUESTS_PER_SECOND_SUFFIX);
}
#endif
try
{
SIPRequest sipRequest = SIPRequest.ParseSIPRequest(sipMessage);
SIPValidationFieldsEnum sipRequestErrorField = SIPValidationFieldsEnum.Unknown;
string sipRequestValidationError = null;
if (!sipRequest.IsValid(out sipRequestErrorField, out sipRequestValidationError))
{
throw new SIPValidationException(sipRequestErrorField, sipRequestValidationError);
}
if (SIPRequestInTraceEvent != null)
{
FireSIPRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipRequest);
}
// Stateful cores will create transactions once they get the request and the transport layer will use those transactions.
// Stateless cores will not be affected by this step as the transaction layer will always return false.
SIPTransaction requestTransaction = (m_transactionEngine != null) ? m_transactionEngine.GetTransaction(sipRequest) : null;
if (requestTransaction != null)
{
if (requestTransaction.TransactionState == SIPTransactionStatesEnum.Completed && sipRequest.Method != SIPMethodsEnum.ACK)
{
logger.Warn("Resending final response for " + sipRequest.Method + ", " + sipRequest.URI.ToString() + ", cseq=" + sipRequest.Header.CSeq + ".");
requestTransaction.RetransmitFinalResponse();
}
else if (sipRequest.Method == SIPMethodsEnum.ACK)
{
//logger.Debug("ACK received for " + requestTransaction.TransactionRequest.URI.ToString() + ".");
if (requestTransaction.TransactionState == SIPTransactionStatesEnum.Completed)
{
//logger.Debug("ACK received for INVITE, setting state to Confirmed, " + sipRequest.URI.ToString() + " from " + sipRequest.Header.From.FromURI.User + " " + remoteEndPoint + ".");
//requestTransaction.UpdateTransactionState(SIPTransactionStatesEnum.Confirmed);
requestTransaction.ACKReceived(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipRequest);
}
else if (requestTransaction.TransactionState == SIPTransactionStatesEnum.Confirmed)
{
// ACK retransmit, ignore as a previous ACK was received and the transaction has already been confirmed.
}
else
{
//logger.Warn("ACK recieved from " + remoteEndPoint.ToString() + " on " + requestTransaction.TransactionState + " transaction, ignoring.");
FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "ACK recieved on " + requestTransaction.TransactionState + " transaction, ignoring.", SIPValidationFieldsEnum.Request, null);
}
}
else
{
logger.Warn("Transaction already exists, ignoring duplicate request, " + sipRequest.Method + " " + sipRequest.URI.ToString() + ".");
//FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "Transaction already exists, ignoring duplicate request, " + sipRequest.Method + " " + sipRequest.URI.ToString() + " from " + remoteEndPoint + ".", SIPValidationFieldsEnum.Request);
}
}
else if (SIPTransportRequestReceived != null)
{
// This is a new SIP request and if the validity checks are passed it will be handed off to all subscribed new request listeners.
#region Check for invalid SIP requests.
if (sipRequest.Header.MaxForwards == 0 && sipRequest.Method != SIPMethodsEnum.OPTIONS)
{
// Check the MaxForwards value, if equal to 0 the request must be discarded. If MaxForwards is -1 it indicates the
// header was not present in the request and that the MaxForwards check should not be undertaken.
//logger.Warn("SIPTransport responding with TooManyHops due to 0 MaxForwards.");
FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "Zero MaxForwards on " + sipRequest.Method + " " + sipRequest.URI.ToString() + " from " + sipRequest.Header.From.FromURI.User + " " + remoteEndPoint.ToString(), SIPValidationFieldsEnum.Request, sipRequest.ToString());
SIPResponse tooManyHops = GetResponse(sipRequest, SIPResponseStatusCodesEnum.TooManyHops, null);
SendResponse(sipChannel, tooManyHops);
return;
}
/*else if (sipRequest.IsLoop(sipChannel.SIPChannelEndPoint.SocketEndPoint.Address.ToString(), sipChannel.SIPChannelEndPoint.SocketEndPoint.Port, sipRequest.CreateBranchId()))
{
//logger.Warn("SIPTransport Dropping looped request.");
FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "Dropping looped request, " + sipRequest.Method + " " + sipRequest.URI.ToString() + " from " + sipRequest.Header.From.FromURI.User + " " + IPSocket.GetSocketString(remoteEndPoint), SIPValidationFieldsEnum.Request);
SIPResponse loopResponse = GetResponse(sipRequest, SIPResponseStatusCodesEnum.LoopDetected, null);
SendResponse(loopResponse);
return;
}*/
#endregion
#region Route pre-processing.
if (sipRequest.Header.Routes.Length > 0)
{
PreProcessRouteInfo(sipRequest);
}
#endregion
// Request has passed validity checks, adjust the client Via header to reflect the socket the request was received on.
//SIPViaHeader originalTopViaHeader = sipRequest.Header.Via.TopViaHeader;
sipRequest.Header.Vias.UpateTopViaHeader(remoteEndPoint.GetIPEndPoint());
// Stateful cores should create a transaction once they receive this event, stateless cores should not.
SIPTransportRequestReceived(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipRequest);
}
}
catch (SIPValidationException sipRequestExcp)
{
FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipRequestExcp.Message, sipRequestExcp.SIPErrorField, sipMessage.RawMessage);
SIPResponse errorResponse = GetResponse(sipChannel.SIPChannelEndPoint, remoteEndPoint, sipRequestExcp.SIPResponseErrorCode, sipRequestExcp.Message);
SendResponse(sipChannel, errorResponse);
}
#endregion
}
}
else
{
FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "Not parseable as SIP message.", SIPValidationFieldsEnum.Unknown, rawSIPMessage);
#if !SILVERLIGHT
if (PerformanceMonitorPrefix != null)
{
SIPSorceryPerformanceMonitor.IncrementCounter(PerformanceMonitorPrefix + SIPSorceryPerformanceMonitor.SIP_TRANSPORT_SIP_BAD_MESSAGES_PER_SECOND_SUFFIX);
}
#endif
}
}
}
}
}
catch (Exception excp)
{
FireSIPBadRequestInTraceEvent(sipChannel.SIPChannelEndPoint, remoteEndPoint, "Exception SIPTransport. " + excp.Message, SIPValidationFieldsEnum.Unknown, rawSIPMessage);
#if !SILVERLIGHT
if (PerformanceMonitorPrefix != null)
{
SIPSorceryPerformanceMonitor.IncrementCounter(PerformanceMonitorPrefix + SIPSorceryPerformanceMonitor.SIP_TRANSPORT_SIP_BAD_MESSAGES_PER_SECOND_SUFFIX);
}
#endif
}
}
private void EndReceiveFrom(IAsyncResult ar)
{
EndPoint remoteEP = (ListeningIPAddress.AddressFamily == AddressFamily.InterNetwork) ? new IPEndPoint(IPAddress.Any, 0) : new IPEndPoint(IPAddress.IPv6Any, 0);
try
{
if (!Closed)
{
SocketFlags flags = SocketFlags.None;
int bytesRead = m_udpSocket.EndReceiveFrom(ar, ref remoteEP);
if (flags == SocketFlags.Truncated)
{
logger.LogWarning($"The message was too large to fit into the specified buffer and was truncated.");
}
if (bytesRead > 0)
{
// In addition to the note in the RTPChannel class about IPPacketInformation some versions of the mono runtime
// on Android are unable to use Begin/EndReceiveMessageFrom.
// See https://github.com/sipsorcery/sipsorcery/issues/302.
// Those specific Begin/End calls were being used to get the packet information and identify which local
// IP address a receive occurred on. Upon investigation it does not seem that the local IP address is
// required on incoming SIP packets. The outgoing socket was previously chosen based on this address but
// subsequent to https://github.com/sipsorcery/sipsorcery/issues/97 the mechanism has changed.
// The calls have been changed to Begin/EndReceiveFrom in order to support Android. The consequence is the localEndPoint
// parameter for the SIPMessageReceived will have an IP address of 0.0.0.0 or [::0] if wildcard addresses are in use.
SIPEndPoint remoteEndPoint = new SIPEndPoint(SIPProtocolsEnum.udp, remoteEP as IPEndPoint, ID, null);
//SIPEndPoint localEndPoint = new SIPEndPoint(SIPProtocolsEnum.udp, new IPEndPoint(packetInfo.Address, Port), ID, null);
SIPEndPoint localEndPoint = new SIPEndPoint(SIPProtocolsEnum.udp, new IPEndPoint(ListeningIPAddress, Port), ID, null);
byte[] sipMsgBuffer = new byte[bytesRead];
Buffer.BlockCopy(m_recvBuffer, 0, sipMsgBuffer, 0, bytesRead);
SIPMessageReceived?.Invoke(this, localEndPoint, remoteEndPoint, sipMsgBuffer);
}
}
}
catch (SocketException sockExcp)
{
if (remoteEP != null)
{
// Note the SIPEndPoint is being used to take care of any IPv4 mapped to IPv6 addresses.
SIPEndPoint remSIPEndPoint = new SIPEndPoint(SIPProtocolsEnum.udp, remoteEP as IPEndPoint);
// This exception can occur as the result of a Send operation. It's caused by an ICMP packet from a remote host
// rejecting an incoming UDP packet. If that happens we want to stop further sends to the socket for a short period.
logger.LogWarning(sockExcp, $"SocketException SIPUDPChannel EndReceiveFrom from {remSIPEndPoint} ({sockExcp.ErrorCode}). {sockExcp.Message}");
m_sendFailures.TryAdd(remSIPEndPoint.GetIPEndPoint(), DateTime.Now);
}
else
{
logger.LogError($"SocketException SIPUDPChannel EndReceiveFrom. {sockExcp}");
}
}
catch (ObjectDisposedException) // Thrown when socket is closed. Can be safely ignored.
{ }
catch (Exception excp)
{
logger.LogError($"Exception SIPUDPChannel EndReceiveFrom. {excp}");
}
finally
{
if (!Closed)
{
Receive();
}
}
}
private void SendRequest(SIPChannel sipChannel, SIPEndPoint dstEndPoint, SIPRequest sipRequest)
{
try
{
if (dstEndPoint != null && dstEndPoint.Address.Equals(BlackholeAddress))
{
// Ignore packet, it's destined for the blackhole.
return;
}
if (m_sipChannels.Count == 0)
{
throw new ApplicationException("No channels are configured in the SIP transport layer. The request could not be sent.");
}
sipRequest.Header.ContentLength = (sipRequest.Body.NotNullOrBlank()) ? Encoding.UTF8.GetByteCount(sipRequest.Body) : 0;
if (sipChannel.IsTLS)
{
sipChannel.Send(dstEndPoint.GetIPEndPoint(), Encoding.UTF8.GetBytes(sipRequest.ToString()), sipRequest.URI.Host);
}
else
{
sipChannel.Send(dstEndPoint.GetIPEndPoint(), Encoding.UTF8.GetBytes(sipRequest.ToString()));
}
if (SIPRequestOutTraceEvent != null)
{
FireSIPRequestOutTraceEvent(sipChannel.SIPChannelEndPoint, dstEndPoint, sipRequest);
}
}
catch (ApplicationException appExcp)
{
logger.Warn("ApplicationException SIPTransport SendRequest. " + appExcp.Message);
SIPResponse errorResponse = GetResponse(sipRequest, SIPResponseStatusCodesEnum.InternalServerError, appExcp.Message);
// Remove any Via headers, other than the last one, that are for sockets hosted by this process.
while (errorResponse.Header.Vias.Length > 0)
{
if (IsLocalSIPEndPoint(SIPEndPoint.ParseSIPEndPoint(errorResponse.Header.Vias.TopViaHeader.ReceivedFromAddress)))
{
errorResponse.Header.Vias.PopTopViaHeader();
}
else
{
break;
}
}
if (errorResponse.Header.Vias.Length == 0)
{
logger.Warn("Could not send error response for " + appExcp.Message + " as no non-local Via headers were available.");
}
else
{
SendResponse(errorResponse);
}
}
}
public void AckRecognitionUnitTest()
{
SIPTransport clientTransport = null;
SIPTransport serverTransport = null;
try
{
SIPTransactionEngine clientEngine = new SIPTransactionEngine(); // Client side of the INVITE.
SIPEndPoint clientEndPoint = new SIPEndPoint(SIPProtocolsEnum.udp, new IPEndPoint(IPAddress.Loopback, 12013));
clientTransport = new SIPTransport(MockSIPDNSManager.Resolve, clientEngine, new SIPUDPChannel(clientEndPoint.GetIPEndPoint()), false);
SetTransportTraceEvents(clientTransport);
SIPTransactionEngine serverEngine = new SIPTransactionEngine(); // Server side of the INVITE.
UASInviteTransaction serverTransaction = null;
SIPEndPoint serverEndPoint = new SIPEndPoint(new IPEndPoint(IPAddress.Loopback, 12014));
serverTransport = new SIPTransport(MockSIPDNSManager.Resolve, serverEngine, new SIPUDPChannel(serverEndPoint.GetIPEndPoint()), false);
SetTransportTraceEvents(serverTransport);
serverTransport.SIPTransportRequestReceived += (localEndPoint, remoteEndPoint, sipRequest) =>
{
Console.WriteLine("Server Transport Request In: " + sipRequest.Method + ".");
serverTransaction = serverTransport.CreateUASTransaction(sipRequest, remoteEndPoint, localEndPoint, null);
SetTransactionTraceEvents(serverTransaction);
serverTransaction.GotRequest(localEndPoint, remoteEndPoint, sipRequest);
};
SIPURI dummyURI = SIPURI.ParseSIPURI("sip:dummy@" + serverEndPoint);
SIPRequest inviteRequest = GetDummyINVITERequest(dummyURI);
inviteRequest.LocalSIPEndPoint = clientTransport.GetDefaultTransportContact(SIPProtocolsEnum.udp);
// Send the invite to the server side.
UACInviteTransaction clientTransaction = new UACInviteTransaction(clientTransport, inviteRequest, serverEndPoint, clientEndPoint, null);
SetTransactionTraceEvents(clientTransaction);
clientEngine.AddTransaction(clientTransaction);
clientTransaction.SendInviteRequest(serverEndPoint, inviteRequest);
Thread.Sleep(500);
Assert.IsTrue(clientTransaction.TransactionState == SIPTransactionStatesEnum.Completed, "Client transaction in incorrect state.");
Assert.IsTrue(serverTransaction.TransactionState == SIPTransactionStatesEnum.Confirmed, "Server transaction in incorrect state.");
}
finally
{
if (clientTransport != null)
{
clientTransport.Shutdown();
}
if (serverTransport != null)
{
serverTransport.Shutdown();
}
}
}
/// <summary>
/// Checks whether there is an existing connection for a remote end point. Existing connections include
/// connections that have been accepted by this channel's listener and connections that have been initiated
/// due to sends from this channel.
/// </summary>
/// <param name="remoteEndPoint">The remote end point to check for an existing connection.</param>
/// <returns>True if there is a connection or false if not.</returns>
public override bool HasConnection(SIPEndPoint remoteEndPoint)
{
return(m_connections.Any(x => x.Value.RemoteEndPoint.Equals(remoteEndPoint.GetIPEndPoint())));
}
/// <summary>
/// Used to create a SIP response for a request when it was not possible to parse the incoming SIP request.
/// The response generated by this method may or may not make it back to the requester. Because the SIP
/// request could not be parsed there are no Via headers available and without those the return network
/// path is missing. Instead a new Via header is generated that may get through if the requester is only
/// one SIP hop away.
/// </summary>
/// <param name="localSIPEndPoint">The local SIP end point the request was received on.</param>
/// <param name="remoteSIPEndPoint">The remote SIP end point the request was received on.</param>
/// <param name="responseCode">The response code to set on the response.</param>
/// <param name="reasonPhrase">Optional reason phrase to set on the response (keep short).</param>
public static SIPResponse GetResponse(SIPEndPoint localSIPEndPoint, SIPEndPoint remoteSIPEndPoint, SIPResponseStatusCodesEnum responseCode, string reasonPhrase)
{
try
{
SIPResponse response = new SIPResponse(responseCode, reasonPhrase);
response.SetSendFromHints(localSIPEndPoint);
SIPSchemesEnum sipScheme = (localSIPEndPoint.Protocol == SIPProtocolsEnum.tls) ? SIPSchemesEnum.sips : SIPSchemesEnum.sip;
SIPFromHeader from = new SIPFromHeader(null, new SIPURI(sipScheme, localSIPEndPoint), null);
SIPToHeader to = new SIPToHeader(null, new SIPURI(sipScheme, localSIPEndPoint), null);
int cSeq = 1;
string callId = CallProperties.CreateNewCallId();
response.Header = new SIPHeader(from, to, cSeq, callId);
response.Header.CSeqMethod = SIPMethodsEnum.NONE;
response.Header.Vias.PushViaHeader(new SIPViaHeader(new SIPEndPoint(localSIPEndPoint.Protocol, remoteSIPEndPoint.GetIPEndPoint()), CallProperties.CreateBranchId()));
response.Header.MaxForwards = Int32.MinValue;
response.Header.Allow = m_allowedSIPMethods;
return(response);
}
catch (Exception excp)
{
logger.LogError("Exception SIPResponse.GetResponse. " + excp.Message);
throw;
}
}
/// <summary>
/// Attempts a send to a remote web socket server. If there is an existing connection it will be used
/// otherwise an attempt will made to establish a new one.
/// </summary>
/// <param name="serverEndPoint">The remote web socket server URI to send to.</param>
/// <param name="buffer">The data buffer to send.</param>
/// <returns>A success value or an error for failure.</returns>
private async Task <SocketError> SendAsync(SIPEndPoint serverEndPoint, byte[] buffer)
{
try
{
string uriPrefix = (serverEndPoint.Protocol == SIPProtocolsEnum.wss)
? WEB_SOCKET_SECURE_URI_PREFIX
: WEB_SOCKET_URI_PREFIX;
var serverUri = new Uri($"{uriPrefix}{serverEndPoint.GetIPEndPoint()}");
string connectionID = GetConnectionID(serverUri);
serverEndPoint.ChannelID = this.ID;
serverEndPoint.ConnectionID = connectionID;
if (m_egressConnections.TryGetValue(connectionID, out var conn))
{
Logger.Logger.Debug(
$"Sending {buffer.Length} bytes on client web socket connection to {conn.ServerUri}.");
ArraySegment <byte> segmentBuffer = new ArraySegment <byte>(buffer);
await conn.Client.SendAsync(segmentBuffer, WebSocketMessageType.Text, true, m_cts.Token)
.ConfigureAwait(false);
return(SocketError.Success);
}
else
{
// Attempt a new connection.
ClientWebSocket clientWebSocket = new ClientWebSocket();
await clientWebSocket.ConnectAsync(serverUri, m_cts.Token).ConfigureAwait(false);
Logger.Logger.Debug($"Successfully connected web socket client to {serverUri}.");
ArraySegment <byte> segmentBuffer = new ArraySegment <byte>(buffer);
await clientWebSocket.SendAsync(segmentBuffer, WebSocketMessageType.Text, true, m_cts.Token)
.ConfigureAwait(false);
var recvBuffer = new ArraySegment <byte>(new byte[2 * SIPStreamConnection.MaxSIPTCPMessageSize]);
Task <WebSocketReceiveResult> receiveTask = clientWebSocket.ReceiveAsync(recvBuffer, m_cts.Token);
// There's currently no way to get the socket IP end point used by the client web socket to establish
// the connection. Instead provide a dummy local end point that has as much of the information as we can.
IPEndPoint localEndPoint =
new IPEndPoint(
(serverEndPoint.Address.AddressFamily == AddressFamily.InterNetwork)
? IPAddress.Any
: IPAddress.IPv6Any, 0);
SIPEndPoint localSIPEndPoint =
new SIPEndPoint(serverEndPoint.Protocol, localEndPoint, this.ID, connectionID);
ClientWebSocketConnection newConn = new ClientWebSocketConnection
{
LocalEndPoint = localSIPEndPoint,
ServerUri = serverUri,
RemoteEndPoint = serverEndPoint,
ConnectionID = connectionID,
ReceiveBuffer = recvBuffer,
ReceiveTask = receiveTask,
Client = clientWebSocket
};
if (!m_egressConnections.TryAdd(connectionID, newConn))
{
Logger.Logger.Error(
$"Could not add web socket client connected to {serverUri} to channel collection, closing.");
await Close(connectionID, clientWebSocket).ConfigureAwait(false);
}
else
{
if (!m_isReceiveTaskRunning)
{
m_isReceiveTaskRunning = true;
_ = Task.Factory.StartNew(MonitorReceiveTasks, TaskCreationOptions.LongRunning);
}
}
return(SocketError.Success);
}
}
catch (SocketException sockExcp)
{
return(sockExcp.SocketErrorCode);
}
}
/// <summary>
/// Attempts to send data to the remote end point over a reliable connection. If an existing
/// connection exists it will be used otherwise an attempt will be made to establish a new connection.
/// </summary>
/// <param name="dstSIPEndPoint">The remote SIP end point to send the reliable data to.</param>
/// <param name="buffer">The data to send.</param>
/// <param name="serverCertificateName">Optional. Only relevant for SSL streams. The common name
/// that is expected for the remote SSL server.</param>
/// <param name="canInitiateConnection">Indicates whether this send should initiate a connection if needed.
/// The typical case is SIP requests can initiate new connections but responses should not. Responses should
/// only be sent on the same TCP or TLS connection that the original request was received on.</param>
/// <param name="connectionIDHint">Optional. The ID of the specific TCP connection to try and the send the message on.</param>
/// <returns>If no errors SocketError.Success otherwise an error value.</returns>
public override Task <SocketError> SendSecureAsync(
SIPEndPoint dstSIPEndPoint,
byte[] buffer,
string serverCertificateName,
bool canInitiateConnection,
string connectionIDHint)
{
try
{
if (dstSIPEndPoint == null)
{
throw new ArgumentException(nameof(dstSIPEndPoint), "An empty destination was specified to Send in SIPTCPChannel.");
}
if (buffer == null || buffer.Length == 0)
{
throw new ApplicationException("An empty buffer was specified to Send in SIPTCPChannel.");
}
else if (!DisableLocalTCPSocketsCheck && NetServices.LocalIPAddresses.Contains(dstSIPEndPoint.Address) && Port == dstSIPEndPoint.Port)
{
logger.LogWarning($"SIP {ProtDescr} Channel blocked Send to {dstSIPEndPoint} as it was identified as a locally hosted {ProtDescr} socket.\r\n" + SIPConstants.DEFAULT_ENCODING.GetString(buffer));
throw new ApplicationException($"A Send call was blocked in SIP {ProtDescr} Channel due to the destination being another local TCP socket.");
}
else
{
IPEndPoint dstEndPoint = dstSIPEndPoint.GetIPEndPoint(m_isDualMode);
// Lookup a client socket that is connected to the destination. If it does not exist attempt to connect a new one.
SIPStreamConnection sipStreamConn = null;
if (connectionIDHint != null)
{
m_connections.TryGetValue(connectionIDHint, out sipStreamConn);
}
if (sipStreamConn == null && HasConnection(dstSIPEndPoint))
{
sipStreamConn = m_connections.Where(x => x.Value.RemoteSIPEndPoint.IsSocketEqual(dstSIPEndPoint)).First().Value;
}
if (sipStreamConn != null)
{
SendOnConnected(sipStreamConn, buffer);
return(Task.FromResult(SocketError.Success));
}
else if (canInitiateConnection)
{
return(ConnectClientAsync(dstEndPoint, buffer, serverCertificateName));
}
else
{
logger.LogWarning($"SIP {ProtDescr} Channel did not have an existing connection for send to {dstSIPEndPoint} and requested not to initiate a connection.");
return(Task.FromResult(SocketError.NotConnected));
}
}
}
catch (SocketException sockExcp)
{
return(Task.FromResult(sockExcp.SocketErrorCode));
}
catch (ApplicationException)
{
throw;
}
catch (Exception excp)
{
logger.LogError($"Exception SIPTCPChannel Send (sendto=>{dstSIPEndPoint}). {excp}");
throw;
}
}
