/// <summary>
/// Export the standalone parts:
/// - The parts made from originals in Links
/// - The Orphan parts: the linked file where the original host element comes from is unloaded.
/// - The Zombie parts: the original host element is deleted from the linked file.
/// </summary>
/// <remarks>
/// This is a temporary workaround to export the parts made from linked elements. It should be refined when linked are supported (LinkedInstance at least.)
/// There are some limitations:
/// The linked element will not export as host, including the relative elements: e.g. windows, doors, openings.
/// The host part cannot export if visibility is set by linked view and has 'Show Original'.
/// The standalone part will skip export if Base Level is set 'Non Associated'.
/// The linked part export cannot be split even if its category is wall or column and 'Split wall or column by story' is checked.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The standalone part to export.</param>
/// <param name="geometryElement">The goemetry of the part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportStandalonePart(ExporterIFC exporterIFC, Element partElement, GeometryElement geometryElement, ProductWrapper productWrapper)
{
Part part = partElement as Part;
if (!ExporterCacheManager.ExportOptionsCache.ExportParts || part == null || geometryElement == null)
{
return;
}
foreach (LinkElementId linkElementId in part.GetSourceElementIds())
{
if (linkElementId.HostElementId != ElementId.InvalidElementId)
{
// Has host element, so should export with host element.
return;
}
if (linkElementId.LinkedElementId != ElementId.InvalidElementId)
{
if (part.LevelId == ElementId.InvalidElementId)
{
// skip the parts have NO Base Level.
continue;
}
IFCExtrusionAxes ifcExtrusionAxes = GetDefaultExtrusionAxesForPart(part);
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, null, ifcExtrusionAxes, null, null, false);
}
}
}
/// <summary>
/// Export the roof to IfcRoof containing its parts.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoofAsParts(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = setter.LocalPlacement;
IFCAnyHandle prodRepHnd = null;
string elementGUID = GUIDUtil.CreateGUID(element);
string elementName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string elementDescription = NamingUtil.GetDescriptionOverride(element, null);
string elementObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
//need to convert the string to enum
string ifcEnumType = ExporterUtil.GetIFCTypeFromExportTable(exporterIFC, element);
ifcEnumType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType);
IFCAnyHandle roofHandle = IFCInstanceExporter.CreateRoof(file, elementGUID, ownerHistory, elementName, elementDescription,
elementObjectType, localPlacement, prodRepHnd, elementTag, ifcEnumType);
// Export the parts
PartExporter.ExportHostPart(exporterIFC, element, roofHandle, productWrapper, setter, localPlacement, null);
productWrapper.AddElement(element, roofHandle, setter, null, true);
transaction.Commit();
}
}
}
/// <summary>
/// Export the parts as independent building elements.
/// </summary>
/// <remarks>
/// The function works with AlternateIFCUI and it requires two conditions:
/// 1. Allows export parts: 'current view only' is checked and 'show parts' is selected.
/// 2. Allows export parts independent: 'Export parts as building elements' is checked in alternate UI dialog.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The standalone part to export.</param>
/// <param name="geometryElement">The goemetry of the part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPartAsBuildingElement(ExporterIFC exporterIFC, Element partElement, GeometryElement geometryElement, ProductWrapper productWrapper)
{
Part part = partElement as Part;
if (!ExporterCacheManager.ExportOptionsCache.ExportParts || part == null || geometryElement == null)
{
return;
}
bool isWall = part.OriginalCategoryId == new ElementId(BuiltInCategory.OST_Walls);
bool isColumn = part.OriginalCategoryId == new ElementId(BuiltInCategory.OST_Columns);
bool isWallOrColumn = isWall || isColumn;
IFCExtrusionAxes ifcExtrusionAxes = GetDefaultExtrusionAxesForPart(part);
Element hostElement = null;
ElementId overrideLevelId = null;
// Find the host element of the part.
hostElement = FindRootParent(part, part.OriginalCategoryId);
// If part's level is not associated, try to get the host's level with the same category.
if (part.LevelId != null && part.LevelId != ElementId.InvalidElementId)
{
overrideLevelId = part.LevelId;
}
else if (hostElement != null)
{
overrideLevelId = hostElement.LevelId;
}
// Split parts with original category is wall or column and the option wall or column is split by level is checked, and then export;
// otherwise, export separate parts normally.
if (isWallOrColumn && ExporterCacheManager.ExportOptionsCache.WallAndColumnSplitting)
{
IList <ElementId> levels = new List <ElementId>();
IList <IFCRange> ranges = new List <IFCRange>();
IFCEntityType exportType = isWall ? IFCEntityType.IfcWall : IFCEntityType.IfcColumn;
IFCExportInfoPair exportInfo = new IFCExportInfoPair();
exportInfo.SetValueWithPair(exportType);
LevelUtil.CreateSplitLevelRangesForElement(exporterIFC, exportInfo, part, out levels, out ranges);
if (ranges.Count == 0)
{
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, null, ifcExtrusionAxes, hostElement,
overrideLevelId, true);
}
else
{
for (int ii = 0; ii < ranges.Count; ii++)
{
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, ranges[ii], ifcExtrusionAxes,
hostElement, levels[ii], true);
}
}
}
else
{
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, null, ifcExtrusionAxes, hostElement,
overrideLevelId, true);
}
}
/// <summary>
/// Exports a roof element to the appropriate IFC entity.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void Export(ExporterIFC exporterIFC, RoofBase roof, ref GeometryElement geometryElement, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(roof);
bool exportAsCurtainRoof = CurtainSystemExporter.IsCurtainSystem(roof);
// if there is only a single part that we can get from the roof geometry, we will not create the aggregation with IfcSlab, but directly export the IfcRoof
bool exportAsSingleGeometry = false;
if (productWrapper != null && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
exportAsSingleGeometry = IFCAnyHandleUtil.IsNullOrHasNoValue(productWrapper.GetAnElement());
}
if (exportParts)
{
if (!PartExporter.CanExportElementInPartExport(roof, roof.LevelId, false))
{
return;
}
ExportRoofAsParts(exporterIFC, roof, geometryElement, productWrapper); // Right now, only flat roof could have parts.
}
else if (exportAsCurtainRoof)
{
CurtainSystemExporter.ExportCurtainRoof(exporterIFC, roof, productWrapper);
}
else
{
string ifcEnumType;
IFCExportInfoPair roofExportType = ExporterUtil.GetProductExportType(exporterIFC, roof, out ifcEnumType);
if (roofExportType.ExportInstance != IFCEntityType.IfcRoof)
{
ExportRoof(exporterIFC, roof, ref geometryElement, productWrapper, exportAsSingleGeometry);
}
else
{
IFCAnyHandle roofHnd = ExportRoofOrFloorAsContainer(exporterIFC, roof,
geometryElement, productWrapper);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(roofHnd))
{
ExportRoof(exporterIFC, roof, ref geometryElement, productWrapper, exportAsSingleGeometry);
}
}
// call for host objects; curtain roofs excused from call (no material information)
if (!ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, roof, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, IFCLayerSetDirection.Axis3, null, null);
}
}
tr.Commit();
}
}
/// <summary>
/// Export all the parts of the host element.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="hostElement">The host element having parts to export.</param>
/// <param name="hostHandle">The host element handle.</param>
/// <param name="originalWrapper">The ProductWrapper object.</param>
public static void ExportHostPart(ExporterIFC exporterIFC, Element hostElement, IFCAnyHandle hostHandle,
ProductWrapper originalWrapper, PlacementSetter placementSetter, IFCAnyHandle originalPlacement, ElementId overrideLevelId)
{
using (ProductWrapper subWrapper = ProductWrapper.Create(exporterIFC, true))
{
List <ElementId> associatedPartsList = PartUtils.GetAssociatedParts(hostElement.Document, hostElement.Id, false, true).ToList();
if (associatedPartsList.Count == 0)
{
return;
}
bool isWallOrColumn = IsHostWallOrColumn(exporterIFC, hostElement);
bool hasOverrideLevel = overrideLevelId != null && overrideLevelId != ElementId.InvalidElementId;
IFCExtrusionAxes ifcExtrusionAxes = GetDefaultExtrusionAxesForHost(exporterIFC, hostElement);
// Split parts if wall or column is split by level, and then export; otherwise, export parts normally.
if (isWallOrColumn && hasOverrideLevel && ExporterCacheManager.ExportOptionsCache.WallAndColumnSplitting)
{
if (!ExporterCacheManager.HostPartsCache.HasRegistered(hostElement.Id))
{
SplitParts(exporterIFC, hostElement, associatedPartsList); // Split parts and associate them with host.
}
// Find and export the parts that are split by specific level.
List <KeyValuePair <Part, IFCRange> > splitPartRangeList = new List <KeyValuePair <Part, IFCRange> >();
splitPartRangeList = ExporterCacheManager.HostPartsCache.Find(hostElement.Id, overrideLevelId);
if (splitPartRangeList != null)
{
foreach (KeyValuePair <Part, IFCRange> partRange in splitPartRangeList)
{
PartExporter.ExportPart(exporterIFC, partRange.Key, subWrapper, placementSetter, originalPlacement,
partRange.Value, ifcExtrusionAxes, hostElement, overrideLevelId, false);
}
}
}
else
{
foreach (ElementId partId in associatedPartsList)
{
Part part = hostElement.Document.GetElement(partId) as Part;
PartExporter.ExportPart(exporterIFC, part, subWrapper, placementSetter, originalPlacement, null, ifcExtrusionAxes,
hostElement, overrideLevelId, false);
}
}
// Create the relationship of Host and Parts.
ICollection <IFCAnyHandle> relatedElementIds = subWrapper.GetAllObjects();
if (relatedElementIds.Count > 0)
{
string guid = GUIDUtil.CreateGUID();
HashSet <IFCAnyHandle> relatedElementIdSet = new HashSet <IFCAnyHandle>(relatedElementIds);
IFCInstanceExporter.CreateRelAggregates(exporterIFC.GetFile(), guid, ExporterCacheManager.OwnerHistoryHandle, null, null, hostHandle, relatedElementIdSet);
}
}
}
/// <summary>
/// Export the roof to IfcRoof containing its parts.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoofAsParts(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper)
{
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, element, out ifcEnumType);
if (exportType.IsUnKnown)
{
exportType = new IFCExportInfoPair(IFCEntityType.IfcRoof);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportType))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = setter.LocalPlacement;
IFCAnyHandle prodRepHnd = null;
string elementGUID = GUIDUtil.CreateGUID(element);
IFCAnyHandle roofHandle = IFCInstanceExporter.CreateGenericIFCEntity(
exportType, exporterIFC,
element, elementGUID, ownerHistory,
localPlacement, prodRepHnd);
// Export the parts
PartExporter.ExportHostPart(exporterIFC, element, roofHandle, productWrapper, setter, localPlacement, null);
productWrapper.AddElement(element, roofHandle, setter, null, true, exportType);
transaction.Commit();
}
}
}
/// <summary>
/// Export the roof to IfcRoof containing its parts.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoofAsParts(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcRoof", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = setter.LocalPlacement;
IFCAnyHandle prodRepHnd = null;
string elementGUID = GUIDUtil.CreateGUID(element);
string elementName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string elementDescription = NamingUtil.GetDescriptionOverride(element, null);
string elementObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
//need to convert the string to enum
string ifcEnumType = ExporterUtil.GetIFCTypeFromExportTable(exporterIFC, element);
ifcEnumType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType);
IFCAnyHandle roofHandle = IFCInstanceExporter.CreateRoof(file, elementGUID, ownerHistory, elementName, elementDescription,
elementObjectType, localPlacement, prodRepHnd, elementTag, ifcEnumType);
// Export the parts
PartExporter.ExportHostPart(exporterIFC, element, roofHandle, productWrapper, setter, localPlacement, null);
productWrapper.AddElement(element, roofHandle, setter, null, true);
transaction.Commit();
}
}
}
/// <summary>
/// Export the roof to IfcRoof containing its parts.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoofAsParts(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRoof;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = setter.LocalPlacement;
IFCAnyHandle prodRepHnd = null;
string elementGUID = GUIDUtil.CreateGUID(element);
//need to convert the string to enum
string ifcEnumType = ExporterUtil.GetIFCTypeFromExportTable(exporterIFC, element);
//ifcEnumType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType);
IFCAnyHandle roofHandle = IFCInstanceExporter.CreateRoof(exporterIFC, element, elementGUID, ownerHistory,
localPlacement, prodRepHnd, ifcEnumType);
// Export the parts
PartExporter.ExportHostPart(exporterIFC, element, roofHandle, productWrapper, setter, localPlacement, null);
productWrapper.AddElement(element, roofHandle, setter, null, true);
transaction.Commit();
}
}
}
/// <summary>
/// Exports a roof element to the appropriate IFC entity.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void Export(ExporterIFC exporterIFC, RoofBase roof, GeometryElement geometryElement, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(roof);
bool exportAsCurtainRoof = CurtainSystemExporter.IsCurtainSystem(roof);
if (exportParts)
{
if (!PartExporter.CanExportElementInPartExport(roof, roof.LevelId, false))
{
return;
}
ExportRoofAsParts(exporterIFC, roof, geometryElement, productWrapper); // Right now, only flat roof could have parts.
}
else if (exportAsCurtainRoof)
{
CurtainSystemExporter.ExportCurtainRoof(exporterIFC, roof, productWrapper);
}
else
{
IFCAnyHandle roofHnd = ExportRoofOrFloorAsContainer(exporterIFC, roof,
geometryElement, productWrapper);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(roofHnd))
{
ExportRoof(exporterIFC, roof, geometryElement, productWrapper);
}
// call for host objects; curtain roofs excused from call (no material information)
if (!ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, roof, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, IFCLayerSetDirection.Axis3, null, null);
}
}
tr.Commit();
}
}
/// <summary>
/// Export the standalone parts:
/// - The parts made from originals in Links
/// - The Orphan parts: the linked file where the original host element comes from is unloaded.
/// - The Zombie parts: the original host element is deleted from the linked file.
/// </summary>
/// <remarks>
/// This is a temporary workaround to export the parts made from linked elements. It should be refined when linked are supported (LinkedInstance at least.)
/// There are some limitations:
/// The linked element will not export as host, including the relative elements: e.g. windows, doors, openings.
/// The host part cannot export if visibility is set by linked view and has 'Show Original'.
/// The standalone part will skip export if Base Level is set 'Non Associated'.
/// The linked part export cannot be split even if its category is wall or column and 'Split wall or column by story' is checked.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The standalone part to export.</param>
/// <param name="geometryElement">The goemetry of the part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportStandalonePart(ExporterIFC exporterIFC, Element partElement, GeometryElement geometryElement, ProductWrapper productWrapper)
{
Part part = partElement as Part;
if (!ExporterCacheManager.ExportOptionsCache.ExportParts || part == null || geometryElement == null)
{
return;
}
if (IsAnyHostElementLocal(part))
{
// Has host element, so should export with host element.
return;
}
ElementId overrideLevelId = null;
if (part.LevelId == ElementId.InvalidElementId)
{
// If part's level is not associated, try to get the host's level with the same category.
Element hostElement = FindRootParent(part, part.OriginalCategoryId);
if (hostElement == null)
{
return;
}
overrideLevelId = hostElement.LevelId;
if (overrideLevelId == ElementId.InvalidElementId)
{
return;
}
}
IFCExtrusionAxes ifcExtrusionAxes = GetDefaultExtrusionAxesForPart(part);
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, null, ifcExtrusionAxes, null,
overrideLevelId, false);
}
/// <summary>
/// Exports a generic element as an IfcSlab.</summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if the floor is exported successfully, false otherwise.</returns>
public static void ExportGenericSlab(ExporterIFC exporterIFC, Element slabElement, GeometryElement geometryElement, string ifcEnumType,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, slabElement))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
bool exportParts = PartExporter.CanExportParts(slabElement);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle prodDefHnd = null;
bool isBRepSlabHnd = false;
if (!exportParts)
{
ecData.SetLocalPlacement(localPlacement);
ElementId catId = CategoryUtil.GetSafeCategoryId(slabElement);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
slabElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
isBRepSlabHnd = (bodyData.ShapeRepresentationType == ShapeRepresentationType.Brep);
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(slabElement);
string entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(slabElement, ifcEnumType, "FLOOR");
string ifcName = NamingUtil.GetNameOverride(slabElement, NamingUtil.GetIFCName(slabElement));
string ifcDescription = NamingUtil.GetDescriptionOverride(slabElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(slabElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(slabElement, NamingUtil.CreateIFCElementId(slabElement));
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, ifcGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacement, exportParts ? null : prodDefHnd,
ifcTag, entityType);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, slabElement, slabHnd, productWrapper, placementSetter, localPlacement, null);
}
productWrapper.AddElement(slabElement, slabHnd, placementSetter, ecData, true);
if (!exportParts)
{
if (slabElement is HostObject)
{
HostObject hostObject = slabElement as HostObject;
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, slabHnd,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, isBRepSlabHnd);
}
else if (slabElement is FamilyInstance)
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, slabElement);
Document doc = slabElement.Document;
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
}
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, slabElement, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), placementSetter, productWrapper);
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// First, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go thruough te Revit model orgigin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorPlane = new Plane(floorDir, floorOrigin);
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorPlane, floorExtrusionDirection, null, out completelyClipped);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = null;
switch (exportType)
{
case IFCExportType.IfcFooting:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCFootingType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCFootingType>(floorElement, ifcEnumType, null);
}
break;
case IFCExportType.IfcCovering:
entityType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCExportType.IfcRamp:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCRampType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCRampType>(floorElement, ifcEnumType, null);
}
break;
default:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
// TODO: replace with CreateGenericBuildingElement.
switch (exportType)
{
case IFCExportType.IfcFooting:
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcCovering:
slabHnd = IFCInstanceExporter.CreateCovering(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcRamp:
slabHnd = IFCInstanceExporter.CreateRamp(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
default:
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
}
if (!exportParts)
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports an element to IFC footing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="ifcEnumType">
/// The string value represents the IFC type.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportFooting(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
string footingType = GetIFCFootingType(ifcEnumType); // need to keep it for legacy support when original data follows slightly diff naming
footingType = IFCValidateEntry.GetValidIFCType(element, footingType);
IFCAnyHandle footing = IFCInstanceExporter.CreateFooting(file, instanceGUID, exporterIFC.GetOwnerHistoryHandle(),
instanceName, instanceDescription, instanceObjectType, ecData.GetLocalPlacement(), prodRep, instanceTag, footingType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, footing, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, footing, matId);
}
}
productWrapper.AddElement(element, footing, setter, ecData, true);
OpeningUtil.CreateOpeningsIfNecessary(footing, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
/// <summary>
/// Exports a generic element as an IfcSlab.</summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if the floor is exported successfully, false otherwise.</returns>
public static void ExportGenericSlab(ExporterIFC exporterIFC, Element slabElement, GeometryElement geometryElement, string ifcEnumType,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
bool exportParts = PartExporter.CanExportParts(slabElement);
IFCFile file = exporterIFC.GetFile();
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, slabElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(slabElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
bodyExporterOptions.TessellationLevel = BodyExporter.GetTessellationLevel();
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
slabElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(slabElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(slabElement, ifcEnumType, "FLOOR");
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(slabElement, NamingUtil.GetIFCNamePlusIndex(slabElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(slabElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(slabElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(slabElement, NamingUtil.CreateIFCElementId(slabElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, slabElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(slabElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, slabElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
}
if (!exportParts)
{
if (slabElement is HostObject)
{
HostObject hostObject = slabElement as HostObject;
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
else if (slabElement is FamilyInstance && slabHnds.Count > 0)
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, slabElement);
Document doc = slabElement.Document;
foreach (IFCAnyHandle slabHnd in slabHnds)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
}
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
IFCAnyHandle type = null;
MaterialLayerSetInfo layersetInfo = null;
if (!ElementFilteringUtil.IsElementVisible(floorElement))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
Document doc = floorElement.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Floor will be split into its parts(temporarily) in order to export the floor by its parts
bool exportByComponents = ExporterUtil.ShouldExportByComponents(floorElement, exportParts);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes);
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody;
additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ?
GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
// Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects()
if (exportByComponents)
{
additionalInfo &= ~GenerateAdditionalInfo.GenerateBody;
}
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (floorAndProperties.Handle != null)
{
representations.Add(floorAndProperties.Handle);
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC);
representations.Add(footprintShapeRep);
}
if (exportByComponents)
{
IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations);
prodReps.Add(prodRep);
}
else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here
{
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
}
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
PotentiallyFixPresentationLayerAssignment(floorElement, prodReps);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
}
}
}
IFCAnyHandle prodDefHnd;
if (prodReps.Count == 0)
{
if (exportByComponents)
{
prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null);
prodReps.Add(prodDefHnd);
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Deal with a couple of cases that have non-standard defaults.
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcCovering:
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCEntityType.IfcSlab:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory,
localPlacementHnd, exportParts ? null : prodReps[ii]);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (!string.IsNullOrEmpty(ifcName))
{
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName);
}
// Pre IFC4 Slab does not have PredefinedType
if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true);
}
if (exportParts && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
else if (exportByComponents)
{
IFCExtrusionCreationData partECData = new IFCExtrusionCreationData();
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii],
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, out layersetInfo, partECData);
loopExtraParams.Add(partECData);
}
slabHnds.Add(slabHnd);
// For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects()
if (!exportParts && !exportByComponents)
{
if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType);
type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]);
ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects();
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects();
newCreatedObjects.ExceptWith(oldCreatedObjects);
PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects);
}
}
if (!exportParts)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
else
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type);
}
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports an element as IFC covering.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCovering(ExporterIFC exporterIFC, Element element, ref GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCovering;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, element, productWrapper);
using (IFCTransaction transaction = new IFCTransaction(file))
{
// For IFC4RV export, Element will be split into its parts(temporarily) in order to export the wall by its parts
// If Parts are created by code and not by user then their name should be equal to Material name.
bool setMaterialNameToPartName = ExporterUtil.CreateParts(element, layersetInfo.MaterialIds.Count, ref geomElem);
ExporterUtil.ExportPartAs exportPartAs = ExporterUtil.CanExportByComponentsOrParts(element);
bool exportByComponents = exportPartAs == ExporterUtil.ExportPartAs.ShapeAspect;
bool exportParts = exportPartAs == ExporterUtil.ExportPartAs.Part;
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
IFCAnyHandle prodRep = null;
if (!exportParts)
{
ecData.SetLocalPlacement(setter.LocalPlacement);
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (exportByComponents)
{
prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, element, categoryId, geomElem, representations);
}
else
{
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geomElem, bodyExporterOptions, null, ecData, true);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
// We will use the category of the element to set a default value for the covering.
string defaultCoveringEnumType = null;
if (categoryId == new ElementId(BuiltInCategory.OST_Ceilings))
{
defaultCoveringEnumType = "CEILING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Floors))
{
defaultCoveringEnumType = "FLOORING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Roofs))
{
defaultCoveringEnumType = "ROOFING";
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string coveringType = IFCValidateEntry.GetValidIFCPredefinedTypeType(/*element,*/ ifcEnumType, defaultCoveringEnumType, "IfcCoveringType");
IFCAnyHandle covering = IFCInstanceExporter.CreateCovering(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
setter.LocalPlacement, prodRep, coveringType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, covering, productWrapper, setter, setter.LocalPlacement, null, setMaterialNameToPartName);
}
else if (exportByComponents)
{
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, element, prodRep,
productWrapper, setter, setter.LocalPlacement, ElementId.InvalidElementId, layersetInfo, ecData);
}
ExporterUtil.AddIntoComplexPropertyCache(covering, layersetInfo);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcCovering, IFCEntityType.IfcCoveringType, coveringType);
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(element, exportInfo, file, ExporterCacheManager.OwnerHistoryHandle, coveringType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, covering);
bool containInSpace = false;
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
// Ceiling containment in Space is generally required and not specific to any view
if (ExporterCacheManager.CeilingSpaceRelCache.ContainsKey(element.Id))
{
IList <ElementId> roomlist = ExporterCacheManager.CeilingSpaceRelCache[element.Id];
// Process Ceiling to be contained in a Space only when it is exactly bounding one Space
if (roomlist.Count == 1)
{
productWrapper.AddElement(element, covering, setter, ecData, false, exportInfo);
// Modify the Ceiling placement to be relative to the Space that it bounds
IFCAnyHandle roomPlacement = IFCAnyHandleUtil.GetObjectPlacement(ExporterCacheManager.SpaceInfoCache.FindSpaceHandle(roomlist[0]));
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(roomPlacement, localPlacementToUse);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle relLocalPlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
IFCAnyHandleUtil.SetAttribute(localPlacementToUse, "PlacementRelTo", roomPlacement);
GeometryUtil.SetRelativePlacement(localPlacementToUse, relLocalPlacement);
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomlist[0], covering);
containInSpace = true;
}
}
// if not contained in Space, assign it to default containment in Level
if (!containInSpace)
{
productWrapper.AddElement(element, covering, setter, ecData, true, exportInfo);
}
if (!exportParts)
{
Ceiling ceiling = element as Ceiling;
if (ceiling != null)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, ceiling, covering,
geomElem, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, null, null);
}
else
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geomElem, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, covering, matId);
}
}
OpeningUtil.CreateOpeningsIfNecessary(covering, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
transaction.Commit();
}
}
/// <summary>
/// Exports a roof to IfcRoof.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <param name="exportRoofAsSingleGeometry">Export roof as single geometry.</param>
public static void ExportRoof(ExporterIFC exporterIFC, Element roof, ref GeometryElement geometryElement,
ProductWrapper productWrapper, bool exportRoofAsSingleGeometry = false)
{
if (roof == null || geometryElement == null)
{
return;
}
string ifcEnumType;
IFCExportInfoPair roofExportType = ExporterUtil.GetProductExportType(exporterIFC, roof, out ifcEnumType);
if (roofExportType.IsUnKnown)
{
roofExportType = new IFCExportInfoPair(IFCEntityType.IfcRoof, "");
}
MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, roof, productWrapper);
IFCFile file = exporterIFC.GetFile();
Document doc = roof.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Roof will be split into its parts(temporarily) in order to export the roof by its parts
ExporterUtil.CreateParts(roof, layersetInfo.MaterialIds.Count, ref geometryElement);
bool exportByComponents = ExporterUtil.CanExportByComponentsOrParts(roof) == ExporterUtil.ExportPartAs.ShapeAspect;
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, roof, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some
// in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be
// used for this reason in the first place.
ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ;
ecData.AreInnerRegionsOpenings = true;
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData = null;
IFCAnyHandle prodRep = null;
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
IList <ElementId> materialIds = new List <ElementId>();
if (!exportByComponents)
{
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof,
categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (bodyData != null && bodyData.MaterialIds != null)
{
materialIds = bodyData.MaterialIds;
}
}
else
{
prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, roof, categoryId, geometryElement, representations);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
bool exportSlab = ((ecData.ScaledLength > MathUtil.Eps() || exportByComponents) &&
roofExportType.ExportInstance == IFCEntityType.IfcRoof && !exportRoofAsSingleGeometry);
string guid = GUIDUtil.CreateGUID(roof);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle roofHnd = IFCInstanceExporter.CreateGenericIFCEntity(
roofExportType, exporterIFC, roof, guid, ownerHistory,
localPlacement, exportSlab ? null : prodRep);
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(roof,
roofExportType, file, ownerHistory, roofExportType.ValidatedPredefinedType,
productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, roofHnd);
productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true, roofExportType);
if (!(roof is RoofBase))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, materialIds);
}
if (exportByComponents && (exportSlab || exportRoofAsSingleGeometry))
{
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, roof, prodRep,
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, layersetInfo, ecData);
}
Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity;
if (exportSlab)
{
string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart);
IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement);
string slabName = IFCAnyHandleUtil.GetStringAttribute(roofHnd, "Name") + ":1";
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, roof, slabGUID, ownerHistory,
slabLocalPlacementHnd, prodRep, slabRoofPredefinedType);
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, slabName);
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform,
exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper);
ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd);
IFCExportInfoPair slabRoofExportType = new IFCExportInfoPair(IFCEntityType.IfcSlab, slabRoofPredefinedType);
productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false, slabRoofExportType);
// Create type
IFCAnyHandle slabRoofTypeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, slabRoofExportType, exporterIFC.GetFile(), ownerHistory, slabRoofPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(slabRoofTypeHnd, slabHnd);
ExporterUtil.AddIntoComplexPropertyCache(slabHnd, layersetInfo);
// For earlier than IFC4 version of IFC export, the material association will be done at the Roof host level with MaterialSetUsage
// This one is only for IFC4 and above
if ((roof is RoofBase) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, layersetInfo.MaterialLayerSetHandle);
}
else if (bodyData != null)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, bodyData.MaterialIds);
}
}
}
else
{
OpeningUtil.CreateOpeningsIfNecessary(roofHnd, roof, ecData, offsetTransform,
exporterIFC, localPlacement, placementSetter, productWrapper);
// For earlier than IFC4 version of IFC export, the material association will be done at the Roof host level with MaterialSetUsage
// This one is only for IFC4 and above
if ((roof is RoofBase) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, layersetInfo.MaterialLayerSetHandle);
}
else if (layersetInfo != null && layersetInfo.MaterialIds != null)
{
materialIds = layersetInfo.MaterialIds.Select(x => x.m_baseMatId).ToList();
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, materialIds);
}
}
}
}
tr.Commit();
}
}
}
}
/// <summary>
/// Exports an element as IFC covering.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCovering(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcCovering", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
IFCAnyHandle prodRep = null;
if (!exportParts)
{
ecData.SetLocalPlacement(setter.LocalPlacement);
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geomElem, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
// We will use the category of the element to set a default value for the covering.
string defaultCoveringEnumType = null;
if (categoryId == new ElementId(BuiltInCategory.OST_Ceilings))
{
defaultCoveringEnumType = "CEILING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Floors))
{
defaultCoveringEnumType = "FLOORING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Roofs))
{
defaultCoveringEnumType = "ROOFING";
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
string coveringType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType, defaultCoveringEnumType);
IFCAnyHandle covering = IFCInstanceExporter.CreateCovering(file, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
instanceName, instanceDescription, instanceObjectType, setter.LocalPlacement, prodRep, instanceTag, coveringType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, covering, productWrapper, setter, setter.LocalPlacement, null);
}
bool containInSpace = false;
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
// Ceiling containment in Space is generally required and not specific to any view
if (ExporterCacheManager.CeilingSpaceRelCache.ContainsKey(element.Id))
{
IList <ElementId> roomlist = ExporterCacheManager.CeilingSpaceRelCache[element.Id];
// Process Ceiling to be contained in a Space only when it is exactly bounding one Space
if (roomlist.Count == 1)
{
productWrapper.AddElement(element, covering, setter, null, false);
// Modify the Ceiling placement to be relative to the Space that it bounds
IFCAnyHandle roomPlacement = IFCAnyHandleUtil.GetObjectPlacement(ExporterCacheManager.SpaceInfoCache.FindSpaceHandle(roomlist[0]));
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(roomPlacement, localPlacementToUse);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle relLocalPlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
IFCAnyHandleUtil.SetAttribute(localPlacementToUse, "PlacementRelTo", roomPlacement);
GeometryUtil.SetRelativePlacement(localPlacementToUse, relLocalPlacement);
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomlist[0], covering);
containInSpace = true;
}
}
// if not contained in Space, assign it to default containment in Level
if (!containInSpace)
{
productWrapper.AddElement(element, covering, setter, null, true);
}
if (!exportParts)
{
Ceiling ceiling = element as Ceiling;
if (ceiling != null)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, ceiling, covering,
geomElem, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, null);
}
else
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geomElem, exporterIFC, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, covering, matId);
}
}
OpeningUtil.CreateOpeningsIfNecessary(covering, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
transaction.Commit();
}
}
/// <summary>
/// Exports an element to IFC footing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="ifcEnumType">
/// The string value represents the IFC type.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportFooting(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcFooting", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string footingType = GetIFCFootingType(ifcEnumType); // need to keep it for legacy support when original data follows slightly diff naming
footingType = IFCValidateEntry.GetValidIFCType(element, footingType);
IFCAnyHandle footing = IFCInstanceExporter.CreateFooting(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
ecData.GetLocalPlacement(), prodRep, footingType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, footing, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, footing, matId);
}
}
productWrapper.AddElement(element, footing, setter, ecData, true);
OpeningUtil.CreateOpeningsIfNecessary(footing, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, ifcEnumType, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = ExporterCacheManager.ExportOptionsCache.ExportAs4 ? GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
if (!(IFCAnyHandleUtil.IsNullOrHasNoValue(floorAndProperties.FootprintInfo.FootPrintHandle)))
{
representations.Add(floorAndProperties.FootprintInfo.FootPrintHandle);
}
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion)
{
//IList<IFCAnyHandle> prodRepsTmp = new List<IFCAnyHandle>();
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
// Get back the representations, we need to add the Footprint to it
//IList<IFCAnyHandle> representations = IFCAnyHandleUtil.GetRepresentations(prodRepsTmp[ii]);
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
//representations.Add(footprintShapeRepresentation);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
//IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
//prodReps.Add(prodRep);
}
else
{
//prodReps.Add(prodRepsTmp[ii]);
}
// We do not need the prodRepsTmp anymore, delete the handle:
//prodRepsTmp[ii].Delete();
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = null;
switch (exportType)
{
case IFCExportType.IfcFooting:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCFootingType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCFootingType>(floorElement, ifcEnumType, null);
}
break;
case IFCExportType.IfcCovering:
entityType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCExportType.IfcRamp:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCRampType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCRampType>(floorElement, ifcEnumType, null);
}
break;
default:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
// TODO: replace with CreateGenericBuildingElement.
switch (exportType)
{
case IFCExportType.IfcFooting:
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcCovering:
slabHnd = IFCInstanceExporter.CreateCovering(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcRamp:
slabHnd = IFCInstanceExporter.CreateRamp(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
default:
//if ((canExportAsInternalExtrusion || exportedAsInternalExtrusion) && ExporterCacheManager.ExportOptionsCache.ExportAs4)
//{
// slabHnd = IFCInstanceExporter.CreateSlabStandardCase(file, currentGUID, ownerHistory, ifcName,
// ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
// ifcTag, entityType);
//}
//else
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
//// For now we have to be content without IfcOpeningStandardCase from the openings created by this native call because it is too much to
//// "reverse engineer" the IFChandle
//foreach (IFCAnyHandle slabHandle in slabHnds)
//{
// updateOpeningProfileRep(exporterIFC, slabHandle);
//}
}
if (!exportParts)
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports an element to IfcPile.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportPile(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
//string pileType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType);
IFCAnyHandle pile = IFCInstanceExporter.CreatePile(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
ecData.GetLocalPlacement(), prodRep, ifcEnumType, null);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, pile, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, pile, matId);
}
}
productWrapper.AddElement(element, pile, setter, ecData, true);
OpeningUtil.CreateOpeningsIfNecessary(pile, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
/// <summary>
/// Exports an element to IfcPile.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportPile(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// NOTE: We expect to incorporate this code into the generic FamilyInstanceExporter at some point.
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
StructuralMemberAxisInfo axisInfo = StructuralMemberExporter.GetStructuralMemberAxisTransform(element);
if (axisInfo != null)
{
ecData.CustomAxis = axisInfo.AxisDirection;
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryCustom;
}
else
{
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
}
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(Common.Enums.IFCEntityType.IfcPile, ifcEnumType);
IFCAnyHandle pile = IFCInstanceExporter.CreatePile(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
ecData.GetLocalPlacement(), prodRep, ifcEnumType, null);
// TODO: to allow shared geometry for Piles. For now, Pile export will not use shared geometry
if (exportInfo.ExportType != Common.Enums.IFCEntityType.UnKnown)
{
IFCAnyHandle type = ExporterUtil.CreateGenericTypeFromElement(element, exportInfo, file, ExporterCacheManager.OwnerHistoryHandle, exportInfo.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, pile);
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, pile, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, pile, matId);
}
}
productWrapper.AddElement(element, pile, setter, ecData, true, exportInfo);
OpeningUtil.CreateOpeningsIfNecessary(pile, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
