Exemplo n.º 1
0
        public Main()
        {
            executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
            repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
            repetierKey.SetValue("installPath", Application.StartupPath);
            if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
                IsMac = true;
            /*String[] parms = Environment.GetCommandLineArgs();
            string lastcom = "";
            foreach (string s in parms)
            {
                if (lastcom == "-home")
                {
                    repetierKey.SetValue("installPath",s);
                    lastcom = "";
                    continue;
                }
                if (s == "-macosx") IsMac = true;
                lastcom = s;
            }*/
            main = this;
            generator = new GCodeGenerator();
            globalSettings = new GlobalSettings();
            conn = new PrinterConnection();
            printerSettings = new FormPrinterSettings();
            conn.analyzer.start();
            threeDSettings = new ThreeDSettings();
            InitializeComponent();
            updateShowFilament();
            RegMemory.RestoreWindowPos("mainWindow", this);
            if (WindowState == FormWindowState.Maximized)
                Application.DoEvents();
            splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
            splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width-470);
            if (IsMono)
            {
                if (!IsMac)
                {
                    foreach (ToolStripItem m in menu.Items)
                    {
                        m.Text = m.Text.Replace("&", null);
                    }
                }
                if (IsMac)
                {
                    /*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
                        Application.Quit ();
                        e.Handled = true;
                    };
 
                    ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
                        WindowState = FormWindowState.Normal;
                        e.Handled = true;
                    };*/

                    MinimumSize = new Size(500, 640);
                    tab.MinimumSize = new Size(500, 500);
                    splitLog.Panel1MinSize = 520;
                    splitLog.Panel2MinSize = 100;
                    splitLog.IsSplitterFixed = true;
                    //splitContainerPrinterGraphic.SplitterDistance -= 52;
                    splitLog.SplitterDistance = splitLog.Height - 100;
                }
            }
            slicerToolStripMenuItem.Visible = false;
            splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
            conn.eventConnectionChange += OnPrinterConnectionChange;
            conn.eventPrinterAction += OnPrinterAction;
            conn.eventJobProgress += OnJobProgress;
            printPanel = new PrintPanel();
            printPanel.Dock = DockStyle.Fill;
            tabPrint.Controls.Add(printPanel);
            printerSettings.formToCon();
            logView = new LogView();
            logView.Dock = DockStyle.Fill;
            splitLog.Panel2.Controls.Add(logView);
            skeinforge = new Skeinforge();
            PrinterChanged(printerSettings.currentPrinterKey, true);
            printerSettings.eventPrinterChanged += PrinterChanged;
            // GCode print preview
            threedview = new ThreeDControl();
            threedview.Dock = DockStyle.Fill;
            tabPage3DView.Controls.Add(threedview);

            printPreview = new ThreeDView();
           // printPreview.Dock = DockStyle.Fill;
          //  splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
            printPreview.SetEditor(false);
            printPreview.autoupdateable = true;
            printVisual = new GCodeVisual(conn.analyzer);
            printVisual.liveView = true;
            printPreview.models.AddLast(printVisual);
            basicTitle = Text;
            jobPreview = new ThreeDView();
         //   jobPreview.Dock = DockStyle.Fill;
         //   splitJob.Panel2.Controls.Add(jobPreview);
            jobPreview.SetEditor(false);
            jobPreview.models.AddLast(jobVisual);
            editor.contentChangedEvent += JobPreview;
            editor.commands = new Commands();
            editor.commands.Read("default", "en");
            UpdateHistory();
            UpdateConnections();
            Main.slic3r = new Slic3r();
            slicer = new Slicer();
            //toolShowLog_CheckedChanged(null, null);
            updateShowFilament();
            assign3DView();
            history = new TemperatureHistory();
            tempView = new TemperatureView();
            tempView.Dock = DockStyle.Fill;
            tabPageTemp.Controls.Add(tempView);
            if (IsMono)
                showWorkdirectoryToolStripMenuItem.Visible = false;
            new SoundConfig();
            stlComposer1.buttonSlice.Text = "Slice with " + slicer.SlicerName;

            // Customizations

            if(Custom.GetBool("removeTestgenerator",false)) {
                internalSlicingParameterToolStripMenuItem.Visible = false;
                testCaseGeneratorToolStripMenuItem.Visible = false;
            }
            string titleAdd = Custom.GetString("titleAddition", "");
            if (titleAdd.Length > 0)
            {
                int p = basicTitle.IndexOf(' ');
                basicTitle = basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
                Text = basicTitle;
            }
            slicerPanel.UpdateSelection();
        }
Exemplo n.º 2
0
        public Main()
        {
            executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
            repetierKey = Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
            repetierKey.SetValue("installPath", Application.StartupPath);
            if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
                IsMac = true;
            /*String[] parms = Environment.GetCommandLineArgs();
            string lastcom = "";
            foreach (string s in parms)
            {
                if (lastcom == "-home")
                {
                    repetierKey.SetValue("installPath",s);
                    lastcom = "";
                    continue;
                }
                if (s == "-macosx") IsMac = true;
                lastcom = s;
            }*/
            main = this;
            generator = new GCodeGenerator();
            globalSettings = new GlobalSettings();
            conn = new PrinterConnection();
            printerSettings = new FormPrinterSettings();
            conn.analyzer.start();
            threeDSettings = new ThreeDSettings();
            InitializeComponent();
            updateShowFilament();
            RegMemory.RestoreWindowPos("mainWindow", this);
            if (WindowState == FormWindowState.Maximized)
                Application.DoEvents();
            splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
            if (IsMono)
            {
                if (!IsMac)
                {
                    splitContainerPrinterGraphic.SplitterDistance += 52;
                    foreach (ToolStripItem m in menu.Items)
                    {
                        m.Text = m.Text.Replace("&", null);
                    }
                }
                if (IsMac)
                {
                    /*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
                        Application.Quit ();
                        e.Handled = true;
                    };
 
                    ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
                        WindowState = FormWindowState.Normal;
                        e.Handled = true;
                    };*/

                    MinimumSize = new Size(500, 640);
                    tab.MinimumSize = new Size(500, 500);
                    splitLog.Panel1MinSize = 520;
                    splitLog.Panel2MinSize = 100;
                    splitLog.IsSplitterFixed = true;
                    splitJob.IsSplitterFixed = true;
                    //splitContainerPrinterGraphic.SplitterDistance -= 52;
                    splitLog.SplitterDistance = splitLog.Height - 100;
                }
            }
            toolShowLog.Checked = RegMemory.GetBool("logShow", true);
            conn.eventConnectionChange += OnPrinterConnectionChange;
            conn.eventPrinterAction += OnPrinterAction;
            conn.eventJobProgress += OnJobProgress;
            printPanel = new PrintPanel();
            printPanel.Dock = DockStyle.Fill;
            splitContainerPrinterGraphic.Panel1.Controls.Add(printPanel);
            printerSettings.formToCon();
            logView = new LogView();
            logView.Dock = DockStyle.Fill;
            splitLog.Panel2.Controls.Add(logView);
            skeinforge = new Skeinforge();
            PrinterChanged(printerSettings.currentPrinterKey, true);
            printerSettings.eventPrinterChanged += PrinterChanged;
            // GCode print preview
            printPreview = new ThreeDControl();
            printPreview.Dock = DockStyle.Fill;
            splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
            printPreview.SetEditor(false);
            printPreview.AutoUpdateable = true;
            printVisual = new GCodeVisual(conn.analyzer);
            printVisual.liveView = true;
            printPreview.models.AddLast(printVisual);
            basicTitle = Text;
            jobPreview = new ThreeDControl();
            jobPreview.Dock = DockStyle.Fill;
            splitJob.Panel2.Controls.Add(jobPreview);
            jobPreview.SetEditor(false);
            jobPreview.models.AddLast(jobVisual);
            editor.contentChangedEvent += JobPreview;
            editor.commands = new Commands();
            editor.commands.Read("default", "en");
            UpdateHistory();
            UpdateConnections();
            Main.slic3r = new Slic3r();
            slicer = new Slicer();
            if (IsMac)
            {
                tabGCode.Controls.Remove(splitJob);
                tabPrint.Controls.Remove(splitContainerPrinterGraphic);
            }
            toolShowLog_CheckedChanged(null, null);
            updateShowFilament();
        }
Exemplo n.º 3
0
        public Main()
        {
            executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
            repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
            repetierKey.SetValue("installPath", Application.StartupPath);
            if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
                IsMac = true;
            /*String[] parms = Environment.GetCommandLineArgs();
            string lastcom = "";
            foreach (string s in parms)
            {
                if (lastcom == "-home")
                {
                    repetierKey.SetValue("installPath",s);
                    lastcom = "";
                    continue;
                }
                if (s == "-macosx") IsMac = true;
                lastcom = s;
            }*/
            main = this;
            SplashScreen.run();
            trans = new Trans(Application.StartupPath + Path.DirectorySeparatorChar + "data" + Path.DirectorySeparatorChar + "translations");
            SwitchButton.imageOffset = RegMemory.GetInt("onOffImageOffset", 0);
            generator = new GCodeGenerator();
            globalSettings = new GlobalSettings();
            conn = new PrinterConnection();
            printerSettings = new FormPrinterSettings();
            printerModel = new PrinterModel();
            conn.analyzer.start(true);
            threeDSettings = new ThreeDSettings();
            InitializeComponent();
            tdSettings.DataSource = threeDSettings;
            tdSettings_DataMemberChanged(null, null);
            editor = new RepetierEditor();
            editor.Dock = DockStyle.Fill;
            tabGCode.Controls.Add(editor);
            updateShowFilament();
            RegMemory.RestoreWindowPos("mainWindow", this);
            if (WindowState == FormWindowState.Maximized)
                Application.DoEvents();
            splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
            splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width-470);
            if (IsMono)
            {
                if (!IsMac)
                {
                    foreach (ToolStripItem m in menu.Items)
                    {
                        m.Text = m.Text.Replace("&", null);
                    }
                }
                if (IsMac)
                {
                    /*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
                        Application.Quit ();
                        e.Handled = true;
                    };
 
                    ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
                        WindowState = FormWindowState.Normal;
                        e.Handled = true;
                    };*/

                    MinimumSize = new Size(500, 640);
                    tab.MinimumSize = new Size(500, 500);
                    splitLog.Panel1MinSize = 520;
                    splitLog.Panel2MinSize = 100;
                    splitLog.IsSplitterFixed = true;
                    //splitContainerPrinterGraphic.SplitterDistance -= 52;
                    splitLog.SplitterDistance = splitLog.Height - 100;
                }
            }
            slicerToolStripMenuItem.Visible = false;
            splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
            splitPrinterId.Panel1Collapsed = !RegMemory.GetBool("printerIdShow", false);
            conn.eventConnectionChange += OnPrinterConnectionChange;
            conn.eventPrinterAction += OnPrinterAction;
            conn.eventJobProgress += OnJobProgress;
            objectPlacement = new STLComposer();
            objectPlacement.Dock = DockStyle.Fill;
            tabModel.Controls.Add(objectPlacement);
            printPanel = new PrintPanel();
            printPanel.Dock = DockStyle.Fill;
            tabPrint.Controls.Add(printPanel);
            printerSettings.formToCon();
            logView = new LogView();
            logView.Dock = DockStyle.Fill;
            splitLog.Panel2.Controls.Add(logView);
            skeinforge = new Skeinforge();
            PrinterChanged(printerSettings.currentPrinterKey, true);
            printerSettings.eventPrinterChanged += PrinterChanged;
            // GCode print preview
            threedview = new ThreeDControl();
            threedview.Dock = DockStyle.Fill;
            tabPage3DView.Controls.Add(threedview);

            printPreview = new ThreeDView();
           // printPreview.Dock = DockStyle.Fill;
          //  splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
            printPreview.SetEditor(false);
            printPreview.autoupdateable = true;
            printVisual = new GCodeVisual(conn.analyzer);
            printVisual.liveView = true;
            printPreview.models.AddLast(printVisual);
            basicTitle = Text;
            jobPreview = new ThreeDView();
         //   jobPreview.Dock = DockStyle.Fill;
         //   splitJob.Panel2.Controls.Add(jobPreview);
            jobPreview.SetEditor(false);
            jobPreview.models.AddLast(jobVisual);
            editor.contentChangedEvent += JobPreview;
            editor.commands = new Commands();
            editor.commands.Read("default", "en");
            UpdateHistory();
            UpdateConnections();
            Main.slic3r = new Slic3r();
            slicer = new Slicer();
            //toolShowLog_CheckedChanged(null, null);
            updateShowFilament();
            assign3DView();
            history = new TemperatureHistory();
            tempView = new TemperatureView();
            tempView.Dock = DockStyle.Fill;
            tabPageTemp.Controls.Add(tempView);
            if (IsMono)
            {
                showWorkdirectoryToolStripMenuItem.Visible = false;
                toolStrip.Height = 56;
            }
            new SoundConfig();
            //stlComposer1.buttonSlice.Text = Trans.T1("L_SLICE_WITH", slicer.SlicerName);

            // Customizations

            if(Custom.GetBool("removeTestgenerator",false)) {
                internalSlicingParameterToolStripMenuItem.Visible = false;
                testCaseGeneratorToolStripMenuItem.Visible = false;
            }
            string titleAdd = Custom.GetString("titleAddition", "");
            string titlePrefix = Custom.GetString("titlePrefix", "");
            if (titleAdd.Length > 0 || titlePrefix.Length>0)
            {
                int p = basicTitle.IndexOf(' ');
                basicTitle = titlePrefix+basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
                Text = basicTitle;
            }
            slicerPanel.UpdateSelection();
            if (Custom.GetBool("removeUpdates", false))
                checkForUpdatesToolStripMenuItem.Visible = false;
            else
                RHUpdater.checkForUpdates(true);
            UpdateToolbarSize();
            // Add languages
            foreach (Translation t in trans.translations.Values)
            {
                ToolStripMenuItem item = new ToolStripMenuItem(t.language,null, languageSelected);
                item.Tag = t;
                languageToolStripMenuItem.DropDownItems.Add(item);
            }
            languageChanged += translate;
            translate();
            if (Custom.GetBool("removeSkeinforge", false))
            {
                Main.slicer.ActiveSlicer = Slicer.SlicerID.Slic3r;
            }
            if (Custom.GetBool("extraSupportButton", false))
            {
                supportToolStripMenuItem.Text = Custom.GetString("extraSupportText", "Support");
            }
            else
            {
                toolStripAskSeperator.Visible = false;
                supportToolStripMenuItem.Visible = false;
            }
            if (Custom.GetString("extraLink1Title", "").Length>0)
            {
                extraUrl1ToolStripMenuItem.Text = Custom.GetString("extraLink1Title", "");
                toolStripAskSeperator.Visible = true;
            }
            else extraUrl1ToolStripMenuItem.Visible = false;
            if (Custom.GetString("extraLink2Title", "").Length > 0)
            {
                extraUrl2ToolStripMenuItem.Text = Custom.GetString("extraLink2Title", "");
                toolStripAskSeperator.Visible = true;
            }
            else extraUrl2ToolStripMenuItem.Visible = false;
            if (Custom.GetString("extraLink3Title", "").Length > 0)
            {
                extraUrl3ToolStripMenuItem.Text = Custom.GetString("extraLink3Title", "");
                toolStripAskSeperator.Visible = true;
            }
            else extraUrl3ToolStripMenuItem.Visible = false;
            if (Custom.GetString("extraLink4Title", "").Length > 0)
            {
                extraUrl4ToolStripMenuItem.Text = Custom.GetString("extraLink4Title", "");
                toolStripAskSeperator.Visible = true;
            }
            else extraUrl4ToolStripMenuItem.Visible = false;
            if (Custom.GetString("extraLink5Title", "").Length > 0)
            {
                extraUrl5ToolStripMenuItem.Text = Custom.GetString("extraLink5Title", "");
                toolStripAskSeperator.Visible = true;
            }
            else extraUrl5ToolStripMenuItem.Visible = false;
            string supportImage = Custom.GetString("extraSupportToolbarImage", "");
            if (supportImage.Length > 0 && File.Exists(Application.StartupPath + Path.DirectorySeparatorChar + supportImage))
            {
                toolStripButtonSupport.Image = Image.FromFile(Application.StartupPath + Path.DirectorySeparatorChar + Custom.GetString("extraSupportToolbarImage", ""));
                toolStripButtonSupport.Text = Custom.GetString("extraSupportText", "Support");
            }
            else
            {
                toolStripButtonSupport.Visible = false;
            }
            toolAction.Text = Trans.T("L_IDLE");
            toolConnection.Text = Trans.T("L_DISCONNECTED");
            updateTravelMoves();
            printerIdLabel.Text = printerSettings.comboPrinter.Text;
            this.AllowDrop = true;
            this.DragEnter += new DragEventHandler(Form1_DragEnter);
            this.DragDrop += new DragEventHandler(Form1_DragDrop);
            extensions.ExtensionManager.Initalize();
            if (conn.connector != null)
                conn.connector.Activate();
            //TestTopoTriangle triTests = new TestTopoTriangle();
            //triTests.RunTests();

            //everything done.  Now look at command line
            ProcessCommandLine();
            snapshotToolStripMenuItem.Visible = false;
            setImportUnits(RegMemory.GetDouble("importScaleFactor", importScaleFactor));

        }