//check plan calculation option
List <PlanCheckResult> CheckCalcOption(IonPlanSetup plan)
{
List <PlanCheckResult> planCheckResults = new List <PlanCheckResult>();
Dictionary <string, string> currentCalcOptions = plan.ProtonCalculationOptions;
Dictionary <string, string> defaultCalcOptions = new DefaultCalcOptions();
foreach (string s in defaultCalcOptions.Keys)
{
if (currentCalcOptions[s].ToUpper() != defaultCalcOptions[s].ToUpper())
{
var planCheckResult = new PlanCheckResult();
planCheckResult.Item = s;
planCheckResult.Expected = defaultCalcOptions[s];
planCheckResult.CurrentPlan = currentCalcOptions[s];
planCheckResult.Pass = PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = "Calculation Option is not same as default";
planCheckResults.Add(planCheckResult);
}
}
if (planCheckResults.Count == 0)
{
var planCheckResult = new PlanCheckResult();
planCheckResult.Item = "Calculation Options Checked";
planCheckResult.Expected = "Default";
planCheckResult.CurrentPlan = "Default";
planCheckResult.Pass = PlanCheckResult.CheckResult.Pass;
planCheckResult.Comments = "";
planCheckResults.Add(planCheckResult);
}
return(planCheckResults);
}
//Check Table coordinates should be 0,0,0
PlanCheckResult CheckTableCoords(IonPlanSetup plan)
{
bool tableCoordsZero = true;
IEnumerable <IonBeam> beams = plan.IonBeams;
foreach (IonBeam b in beams)
{
if (Math.Abs(b.IonControlPoints.First().TableTopLongitudinalPosition - 0.0) > Double.Epsilon * 100)
{
tableCoordsZero = false;
}
if (Math.Abs(b.IonControlPoints.First().TableTopLateralPosition - 0.0) > Double.Epsilon * 100)
{
tableCoordsZero = false;
}
if (Math.Abs(b.IonControlPoints.First().TableTopVerticalPosition - 0.0) > Double.Epsilon * 100)
{
tableCoordsZero = false;
}
}
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "Check Table Coords";
planCheckResult.Expected = "All table coords are zero";
planCheckResult.CurrentPlan = tableCoordsZero ? "All table coords are zero" : "some table coords are not zero";
planCheckResult.Pass = tableCoordsZero ? PlanCheckResult.CheckResult.Pass : PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = tableCoordsZero ? "" : "Please check the table coordinations";
return(planCheckResult);
}
//Check CT Calibration Curve
PlanCheckResult CheckCTCalibration(IonPlanSetup plan)
{
PlanCheckResult planCheckResult = new PlanCheckResult();
string CTCalibrationCurrent = plan.StructureSet.Image.Series.ImagingDeviceId;
string CTCalibrationExpected = "GE CT";
planCheckResult.Item = "CT Calibration Curve";
planCheckResult.Expected = CTCalibrationExpected;
planCheckResult.CurrentPlan = CTCalibrationCurrent;
planCheckResult.Pass = (CTCalibrationCurrent == CTCalibrationExpected) ? PlanCheckResult.CheckResult.Pass : PlanCheckResult.CheckResult.Fail;
planCheckResult.Comments = (CTCalibrationCurrent == CTCalibrationExpected) ? "" : "Please check the CT calibration curve";
return(planCheckResult);
}
//check fields
List <PlanCheckResult> CheckLabelGantryAngle(IonPlanSetup plan)
{
List <PlanCheckResult> planCheckResults = new List <PlanCheckResult>();
IEnumerable <IonBeam> ionBeams = plan.IonBeams;
foreach (IonBeam b in ionBeams)
{
double gantry = b.IonControlPoints.First().GantryAngle;
double couch = b.IonControlPoints.First().PatientSupportAngle;
FieldNameChecker fieldNameChecker = new FieldNameChecker(
b.Id,
gantry,
couch,
plan.StructureSet.Image.ImagingOrientation);
bool pass = fieldNameChecker.IsLegitName || fieldNameChecker.IsAngleMatch;
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "Check " + b.Id + "...";
planCheckResult.Expected = "";
planCheckResult.CurrentPlan = pass ? "Pass!" : "Not Pass";
planCheckResult.Pass = pass ? PlanCheckResult.CheckResult.Pass : PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = pass ? "" : fieldNameChecker.Warning;
planCheckResults.Add(planCheckResult);
//check the gantry and couch agnle is integer
if (Math.Abs(gantry % 1) >= (Double.Epsilon * 100))
{
planCheckResult.Item = b.Id + " Gantry";
planCheckResult.Expected = "Integer";
planCheckResult.CurrentPlan = gantry.ToString("0.00");
planCheckResult.Pass = PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = "Gantry angle is not integer.";
planCheckResults.Add(planCheckResult);
}
if (Math.Abs(couch % 1) >= (Double.Epsilon * 100))
{
planCheckResult.Item = b.Id + " Couch";
planCheckResult.Expected = "Integer";
planCheckResult.CurrentPlan = couch.ToString("0.00");
planCheckResult.Pass = PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = "Couch angle is not integer.";
planCheckResults.Add(planCheckResult);
}
}
return(planCheckResults);
}
//check if all beams are same range shift
PlanCheckResult CheckSameRangeShift(IonPlanSetup plan)
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "Same Range Shift";
planCheckResult.Expected = "All beams range shift are same";
IEnumerable <IonBeam> ionBeams = plan.IonBeams;
IEnumerable <RangeShifter> firstBeamRangeShifters = ionBeams.First().RangeShifters;
bool isSame = ionBeams.All(b => b.RangeShifters.SequenceEqual(firstBeamRangeShifters)) ? true : false;
planCheckResult.CurrentPlan = isSame ? "All beams range shift are same" : "Some beam range shift is different";
planCheckResult.Pass = isSame ? PlanCheckResult.CheckResult.Pass : PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = isSame ? "" : "Please check the range shift for all beams";
return(planCheckResult);
}
//check if iso center are integer
PlanCheckResult CheckISOInteger(IonPlanSetup plan)
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "ISO Integer";
planCheckResult.Expected = "ISO is integer";
IEnumerable <IonBeam> ionBeams = plan.IonBeams;
var firstBeamISO = ionBeams.First().IsocenterPosition;
bool isInteger = (
Math.Abs(firstBeamISO.x % 1) < Double.Epsilon * 100 &&
Math.Abs(firstBeamISO.y % 1) < Double.Epsilon * 100 &&
Math.Abs(firstBeamISO.z % 1) < Double.Epsilon * 100);
planCheckResult.CurrentPlan = isInteger ? "ISO is integer" : "ISO is not integer";
planCheckResult.Pass = isInteger ? PlanCheckResult.CheckResult.Pass : PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = isInteger ? "" : "Please check the ISO Center for all beams";
return(planCheckResult);
}
//check plan name
PlanCheckResult CheckPlanName(IonPlanSetup plan)
{
var planCheckResult = new PlanCheckResult
{
Item = "Plan Name",
Expected = "",
CurrentPlan = plan.Id,
Pass = PlanCheckResult.CheckResult.Pass,
Activated = true,
Comments = ""
};
if (!PlanNameRule(plan.Id))
{
planCheckResult.Pass = PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = "Plan Name is not right.";
}
return(planCheckResult);
}
//check if all beams are same iso center
PlanCheckResult CheckSameISO(IonPlanSetup plan)
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "Same ISO";
planCheckResult.Expected = "All beams ISO are same";
IEnumerable <IonBeam> ionBeams = plan.IonBeams;
var firstBeamISO = ionBeams.First().IsocenterPosition;
bool isSame = ionBeams.All(b => b.IsocenterPosition.Equals(firstBeamISO)) ? true : false;
planCheckResult.CurrentPlan = isSame ? "All beams ISO are same" : "Some beam ISO is different";
planCheckResult.Pass = isSame ? PlanCheckResult.CheckResult.Pass : PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = isSame ? "Isocenter is:("
+ firstBeamISO.x.ToString("0.00") + ","
+ firstBeamISO.y.ToString("0.00") + ","
+ firstBeamISO.z.ToString("0.00") + ")."
: "Please check the ISO Center for all beams";
return(planCheckResult);
}
//check plan calculation model
PlanCheckResult CheckPlanModel(IonPlanSetup plan)
{
var planCheckResult = new PlanCheckResult
{
Item = "Proton Dose Calculation Model",
Expected = "15.5",
CurrentPlan = plan.ProtonCalculationModel,
Pass = PlanCheckResult.CheckResult.Pass,
Activated = true,
Comments = ""
};
if (!planCheckResult.CurrentPlan.Contains(planCheckResult.Expected))
{
planCheckResult.Pass = PlanCheckResult.CheckResult.Fail;
planCheckResult.Comments = "Old model is used.";
}
return(planCheckResult);
}
//check Support Structure
PlanCheckResult CheckSupportStructure(IonPlanSetup plan)
{
PlanCheckResult planCheckResult = new PlanCheckResult();
IEnumerable <Structure> structures = plan.StructureSet.Structures;
bool hasSupport = false;
foreach (Structure s in structures)
{
IEnumerable <StructureCodeInfo> structureCode = s.StructureCodeInfos;
bool isSupport = structureCode.Any(sc => sc.Code == "Support");
if (isSupport)
{
hasSupport = true;
}
}
planCheckResult.Item = "Support Structure";
planCheckResult.Expected = "Support Structure exists";
planCheckResult.CurrentPlan = hasSupport ? "Support Structure exists" : "Support Structure not exists";
planCheckResult.Pass = hasSupport ? PlanCheckResult.CheckResult.Pass : PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = hasSupport ? "" : "Please check the support structure";
return(planCheckResult);
}
//Check Image (Orientation, CT thickness, or missing CT, total number, etc.)
List <PlanCheckResult> CheckImage(IonPlanSetup plan)
{
List <PlanCheckResult> planCheckResults = new List <PlanCheckResult>();
Image image = plan.StructureSet.Image;
//Orientation
PatientOrientation patientOrientation = image.ImagingOrientation;
if (patientOrientation == PatientOrientation.HeadFirstSupine)
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "Patient Orientation";
planCheckResult.Expected = PatientOrientation.HeadFirstSupine.ToString();
planCheckResult.CurrentPlan = patientOrientation.ToString();
planCheckResult.Pass = PlanCheckResult.CheckResult.Pass;
planCheckResult.Comments = "";
planCheckResults.Add(planCheckResult);
}
else
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "Patient Orientation";
planCheckResult.Expected = "";
planCheckResult.CurrentPlan = patientOrientation.ToString();
planCheckResult.Pass = PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = "Patient is NOT HeadFirstSupine, please double check patient orientation.";
planCheckResults.Add(planCheckResult);
}
//CT thickness
double CTThickness = image.ZRes;
double defaultCTThickness = 2.5;
if (CTThickness - defaultCTThickness < 1e-7)
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "CT Thickness (mm)";
planCheckResult.Expected = "2.5";
planCheckResult.CurrentPlan = CTThickness.ToString();
planCheckResult.Pass = PlanCheckResult.CheckResult.Pass;
planCheckResult.Comments = "";
planCheckResults.Add(planCheckResult);
}
else
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "CT Thickness (mm)";
planCheckResult.Expected = "2.5";
planCheckResult.CurrentPlan = CTThickness.ToString("0.00");
planCheckResult.Pass = PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = "CT thickness is not same as default. Please check.";
planCheckResults.Add(planCheckResult);
}
//CT total slices < 300
double CTSlices = image.ZSize;
double maxSlice = 300;
if (CTSlices <= maxSlice)
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "CT Slices";
planCheckResult.Expected = "<300";
planCheckResult.CurrentPlan = CTSlices.ToString();
planCheckResult.Pass = PlanCheckResult.CheckResult.Pass;
planCheckResult.Comments = "";
planCheckResults.Add(planCheckResult);
}
else
{
PlanCheckResult planCheckResult = new PlanCheckResult();
planCheckResult.Item = "CT Slices";
planCheckResult.Expected = "<300";
planCheckResult.CurrentPlan = CTSlices.ToString();
planCheckResult.Pass = PlanCheckResult.CheckResult.Warning;
planCheckResult.Comments = "CT slice is more than 300";
planCheckResults.Add(planCheckResult);
}
return(planCheckResults);
}