private void MillPipeNewEditXtraForm_FormClosed(object sender, FormClosedEventArgs e)
{
commandManager.Dispose();
if (viewModel != null)
{
viewModel.Dispose();
viewModel = null;
}
}
public NewSavePipeCommand(
MillPipeNewEditViewModel viewModel,
IMillRepository repo,
IUserNotify notify,
ISecurityContext ctx)
{
this.viewModel = viewModel;
this.repo = repo;
this.notify = notify;
this.ctx = ctx;
}
public NewSavePipeCommand(
MillPipeNewEditViewModel viewModel,
IMillRepository repo,
IUserNotify notify,
ISecurityContext ctx)
{
this.viewModel = viewModel;
this.repo = repo;
this.notify = notify;
this.ctx = ctx;
}
public ExtractHeatsCommand(MillPipeNewEditViewModel viewModel, IHeatRepository repo, IUserNotify notify)
{
this.viewModel = viewModel;
this.repo = repo;
this.notify = notify;
}
public GetPipeCommand(MillPipeNewEditViewModel viewModel, IMillRepository repo)
{
this.viewModel = viewModel;
this.repo = repo;
}
public ExtractPipeTypeCommand(MillPipeNewEditViewModel viewModel, IMillPipeSizeTypeRepository repo)
{
this.viewModel = viewModel;
this.repo = repo;
}
public GetProjectCommand(MillPipeNewEditViewModel viewModel, IProjectRepository repo)
{
this.viewModel = viewModel;
this.repo = repo;
}
public ExtractPipeTypeCommand(MillPipeNewEditViewModel viewModel, IMillPipeSizeTypeRepository repo)
{
this.viewModel = viewModel;
this.repo = repo;
}
public void TestMillPipeNewEdit()
{
var modifiableView = new Mock<IModifiable>();
var repoPipe = new Mock<IPipeRepository>();
var notify = new Mock<IUserNotify>();
var repoPlate = new Mock<IPlateRepository>();
var repoHeat = new Mock<IHeatRepository>();
var repoWeld = new Mock<IWeldRepository>();
var repoPipeType = new Mock<IMillPipeSizeTypeRepository>();
var repoPurchaseOrder = new Mock<IPurchaseOrderRepository>();
var repoWelder = new Mock<IWelderRepository>();
var repoPipeTestResult = new Mock<IPipeTestResultRepository>();
var repoPipeTest = new Mock<IPipeTestRepository>();
var repoInspector = new Mock<IInspectorRepository>();
var repoProject = new Mock<IProjectRepository>();
var ctx = new Mock<ISecurityContext>();
var pipe = new Pipe();
repoPipe.Setup(x => x.GetActiveByNumber(pipe)).Returns(new List<Pipe>());
repoProject.Setup(x => x.GetSingle()).Returns(new Project() { IsNative = true});
repoPipeTest.Setup(x => x.GetByCriteria(It.IsAny<NHibernate.Criterion.DetachedCriteria>())).Returns(new List<PipeTest>());
Mock<IMillRepository> millRepos = new Mock<IMillRepository>();
millRepos.SetupGet(_ => _.RepoPipe).Returns(repoPipe.Object);
millRepos.SetupGet(_ => _.RepoPlate).Returns(repoPlate.Object);
millRepos.SetupGet(_ => _.RepoHeat).Returns(repoHeat.Object);
millRepos.SetupGet(_ => _.RepoWeld).Returns(repoWeld.Object);
millRepos.SetupGet(_ => _.RepoPipeType).Returns(repoPipeType.Object);
millRepos.SetupGet(_ => _.RepoPurchaseOrder).Returns(repoPurchaseOrder.Object);
millRepos.SetupGet(_ => _.WelderRepo).Returns(repoWelder.Object);
millRepos.SetupGet(_ => _.RepoPipeTestResult).Returns(repoPipeTestResult.Object);
millRepos.SetupGet(_ => _.RepoPipeTest).Returns(repoPipeTest.Object);
millRepos.SetupGet(_ => _.RepoInspector).Returns(repoInspector.Object);
millRepos.SetupGet(_ => _.RepoProject).Returns(repoProject.Object);
modifiableView.SetupGet(x => x.IsModified).Returns(false);
var viewModel = new MillPipeNewEditViewModel(
millRepos.Object,
Guid.Empty,
notify.Object,
ctx.Object);
var validatable = new Mock<IValidatable>();
validatable.Setup(x => x.Validate()).Returns(true);
viewModel.ValidatableView = validatable.Object;
viewModel.Pipe = pipe;
viewModel.ModifiableView = modifiableView.Object;
var command = new NewSavePipeCommand(
viewModel,
millRepos.Object,
notify.Object,
ctx.Object);
command.Execute();
millRepos.Verify(_ => _.BeginTransaction(), Times.Once());
repoPipe.Verify(_ => _.SaveOrUpdate(It.IsAny<Pipe>()), Times.Once());
millRepos.Verify(_ => _.Commit(), Times.Once());
repoPipe.Verify(_ => _.Evict(It.IsAny<Pipe>()), Times.Once());
}
private void MillPipeNewEditXtraForm_FormClosed(object sender, FormClosedEventArgs e)
{
commandManager.Dispose();
if(viewModel != null)
{
viewModel.Dispose();
viewModel = null;
}
}
public MillPipeNewEditXtraForm(Guid id)
{
this.Id = id;
InitializeComponent();
SetControlsTextLength();
viewModel = (MillPipeNewEditViewModel)Program
.Kernel
.Get<MillPipeNewEditViewModel>(
new ConstructorArgument("id", id));
viewModel.ModifiableView = this;
viewModel.ValidatableView = this;
pipeCreationDate.Properties.NullDate = DateTime.MinValue;
pipeCreationDate.Properties.NullText = string.Empty;
#region --- Colouring of required controls ---
pipeNumber.SetRequiredText();
pipeSize.SetRequiredCombo();
pipeCreationDate.SetRequiredText();
heatsLookUp.SetRequiredGridLookUp();
ordersLookUp.SetRequiredText();
plateNumber.SetRequiredText();
#endregion //--- Colouring of required controls ---
#region --- Read-only controls and edit mode ---
SetAlwaysReadOnly(plateManufacturer);
SetAlwaysReadOnly(purchaseOrderDate);
SetAlwaysReadOnly(railcarNumber);
SetAlwaysReadOnly(releaseNoteNumber);
SetAlwaysReadOnly(releaseNoteDate);
SetAlwaysReadOnly(certificateNumber);
SetAlwaysReadOnly(destination);
SetAlwaysReadOnly(steelGrade);
SetAlwaysReadOnly(weight);
SetAlwaysReadOnly(length);
SetAlwaysReadOnly(pipeLength);
SetAlwaysReadOnly(diameter);
SetAlwaysReadOnly(thickness);
SetAlwaysReadOnly(millStatus);
attachmentsButton.Enabled = true;
SetConditional(pipeNumber, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(pipeSize, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(heatsLookUp, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(heatsLookUp, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(ordersLookUp, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(pipeCreationDate, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(plateNumber, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(coatingHistory, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(weldingHistory, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
SetConditional(inspections, delegate(bool editMode)
{
return (viewModel.PipeIsActive);
});
#endregion //--- Read-only controls ---
#region --- Set Properties.CharacterCasing to Upper ---
pipeNumber.SetAsIdentifier();
plateNumber.SetAsIdentifier();
certificateNumber.SetAsIdentifier();
#endregion //--- Set Properties.CharacterCasing to Upper ---
plateThickness.SetFloatMask(Constants.DigitsBeforeDecimalPoint);
heatsLookUp.ButtonSetup();
ordersLookUp.ButtonSetup();
// Allow change focus or close while heatsLookUp or ordersLookUp validation error
AutoValidate = AutoValidate.EnableAllowFocusChange;
// Select tab depending on is new pipe or existed
tabbedControlGroup.SelectedTabPage = (id == Guid.Empty) ?
pipeTabLayoutControlGroup : inspectionsTabLayoutControlGroup;
}
public ExtractHeatsCommand(MillPipeNewEditViewModel viewModel, IHeatRepository repo)
{
this.viewModel = viewModel;
this.repo = repo;
}
public ExtractHeatsCommand(MillPipeNewEditViewModel viewModel, IHeatRepository repo, IUserNotify notify)
{
this.viewModel = viewModel;
this.repo = repo;
this.notify = notify;
}
public ExtractPurchaseOrderCommand(MillPipeNewEditViewModel viewModel, IPurchaseOrderRepository repo)
{
this.viewModel = viewModel;
this.repo = repo;
}
public MillPipeNewEditXtraForm(Guid id)
{
this.id = id;
InitializeComponent();
SetControlsTextLength();
viewModel = (MillPipeNewEditViewModel)Program
.Kernel
.Get <MillPipeNewEditViewModel>(
new ConstructorArgument("id", id));
viewModel.ModifiableView = this;
viewModel.ValidatableView = this;
pipeCreationDate.Properties.NullDate = DateTime.MinValue;
pipeCreationDate.Properties.NullText = string.Empty;
#region --- Colouring of required controls ---
pipeNumber.SetRequiredText();
pipeSize.SetRequiredCombo();
pipeCreationDate.SetRequiredText();
heatsLookUp.SetRequiredGridLookUp();
ordersLookUp.SetRequiredText();
plateNumber.SetRequiredText();
#endregion //--- Colouring of required controls ---
#region --- Read-only controls and edit mode ---
SetAlwaysReadOnly(plateManufacturer);
SetAlwaysReadOnly(purchaseOrderDate);
SetAlwaysReadOnly(railcarNumber);
SetAlwaysReadOnly(releaseNoteNumber);
SetAlwaysReadOnly(releaseNoteDate);
SetAlwaysReadOnly(certificateNumber);
SetAlwaysReadOnly(destination);
SetAlwaysReadOnly(steelGrade);
SetAlwaysReadOnly(weight);
SetAlwaysReadOnly(length);
SetAlwaysReadOnly(pipeLength);
SetAlwaysReadOnly(diameter);
SetAlwaysReadOnly(thickness);
SetAlwaysReadOnly(millStatus);
IsEditMode = ctx.HasAccess(global::Domain.Entity.Security.Privileges.EditPipe);
attachmentsButton.Enabled = true;
#endregion //--- Read-only controls ---
#region --- Set Properties.CharacterCasing to Upper ---
pipeNumber.SetAsIdentifier();
plateNumber.SetAsIdentifier();
heatsLookUp.SetAsIdentifier();
ordersLookUp.SetAsIdentifier();
certificateNumber.SetAsIdentifier();
#endregion //--- Set Properties.CharacterCasing to Upper ---
heatsLookUp.ButtonSetup();
ordersLookUp.ButtonSetup();
// Allow change focus or close while heatsLookUp or ordersLookUp validation error
AutoValidate = AutoValidate.EnableAllowFocusChange;
IsEditMode = true;
// Select tab depending on is new pipe or existed
tabbedControlGroup.SelectedTabPage = (id == Guid.Empty) ?
pipeTabLayoutControlGroup : inspectionsTabLayoutControlGroup;
CannotOpenForViewing = id == Guid.Empty;
}