Exemplo n.º 1
0
        public void LoadNewMapNodes(List<Vector3> nodePositions)
        {
            //erase old blocks
            m_Nodes.Clear();

            foreach (Vector3 position in nodePositions)
            {
                //create new node
                Node newNode = new Node(m_NextId++);

                //load content
                newNode.LoadContent(Content, "Models//navNode");

                //set position
                newNode.SetPosition(position);

                //add node
                m_Nodes.Add(newNode);
            }

            // Connect all the nodes to each other
            foreach (Node node in m_Nodes)
            {
                // Connect possible left node
                foreach (Node connNode in m_Nodes)
                {
                    if (connNode.Position.X == node.Position.X + 6
                        && connNode.Position.Z == node.Position.Z)
                    {
                        node.adjNodes.Add(connNode);
                    }
                    else if (connNode.Position.X == node.Position.X
                        && connNode.Position.Z == node.Position.Z + 6)
                    {
                        node.adjNodes.Add(connNode);
                    }
                    else if (connNode.Position.X == node.Position.X - 6
                        && connNode.Position.Z == node.Position.Z)
                    {
                        node.adjNodes.Add(connNode);
                    }
                    else if (connNode.Position.X == node.Position.X
                        && connNode.Position.Z == node.Position.Z - 6)
                    {
                        node.adjNodes.Add(connNode);
                    }
                }
            }
        }
Exemplo n.º 2
0
        public Agent(Map world, int id, bool outputGenes)
            : base()
        {
            //heading is initially 0
            m_Heading = 0.0f;

            //side is 90 degrees CW from heading
            m_Side = m_Heading - (float)Math.PI / 2.0f;

            //velocity, acceleration, speed are initially zero
            m_Velocity = Vector3.Zero;
            m_Acceleration = Vector3.Zero;
            m_Speed = 0.0f;
            m_TurnAmount = 0.0f;

            //init max speed
            m_MaxSpeed = MAX_SPEED;

            m_AgentAdjacencyList = new List<Tuple<Agent, float, float>>();

            //agent is initially inactive
            m_IsActive = false;

            //sensory radius for adjacent agents and pie slice
            m_SensoryRadius = 400;

            //do no initially output info
            m_OutputAdjacentAgents = false;
            m_OutputInfo = false;
            m_OutputRayInfo = false;

            //init agent's id
            this.m_ID = id;

            m_SteeringBehaviors = new SteeringBehaviors(this);

            m_World = world;

            m_Brain = new NeuralNetwork();
            m_OutputGenes = outputGenes;
            if (m_OutputGenes == true)
            {
                m_GeneticFile = new System.IO.StreamWriter("Agent" + Id + ".gene");
            }

            m_MemoryOutputs = new List<double>();
            m_MemoryOutputs.Add(0);
            m_MemoryOutputs.Add(0);
            m_MemoryOutputs.Add(0);
            m_MemoryOutputs.Add(0);
            m_Fitness = 0;

            //init rangefinder list
            InitializeRangefinderWalls();
            InitializeRangefinderBlocks();

            //init pie slices
            InitializePieSliceSensors();

            //init node adj list
            InitializeAdjacencyListNodes();

            //init state is navigate
            m_CurrentState = new State_Navigate();

            m_NavDelay = DateTime.Now;

            //begin invulnerability timer
            m_Invuln = true;

            m_InvulnTimer = DateTime.Now.AddSeconds(12);

            // Initialize the Escape node to null to set it later
            m_EscapeNode = null;

            m_StartingLocation = Vector3.Up;

            m_MovementSpeed = MAX_SPEED;
            m_TurnSpeed = MAX_TURN_SPEED;
        }
Exemplo n.º 3
0
 public List<Node> createNavPath(Dictionary<Node, Node> lastNode, Node crnt_node)
 {
     /*
      * Construct the navigation graph for the agent to follow.
      */
     List<Node> result = new List<Node>();
     if (lastNode.ContainsKey(crnt_node))
     {
         result = createNavPath(lastNode, lastNode[crnt_node]);
         result.Add(crnt_node);
         return (result);
     }
     else
     {
         result.Add(crnt_node);
         return (result);
     }
 }
Exemplo n.º 4
0
        public List<Node> FindPath(Node startNode, Node endNode)
        {
            /*
             * Determine a navigation path from startNode to endNode using A*.
             */
            //System.IO.TextWriter tw = new System.IO.StreamWriter("output.txt");

            startNode.g_dist = 0;
            startNode.h_dist = Vector3.Distance(startNode.Position, endNode.Position);
            startNode.f_dist = startNode.g_dist + startNode.h_dist;

            Dictionary<Node, Node> lastNode = new Dictionary<Node, Node>();

            List<Node> blockedSet = new List<Node>();
            List<Node> potentialSet = new List<Node>();

            potentialSet.Add(startNode);

            while (potentialSet.Count > 0)
            {
                Node nodeA = null;

                double f_min = Double.MaxValue;

                /*
                 * Choose the shortest path so far to continue from.
                 */
                //tw.WriteLine("Cycling through...");
                foreach (Node tempNode in potentialSet)
                {
                    //tw.WriteLine("Node " + tempNode.id + ", f_dist = " + tempNode.f_dist);
                    if (tempNode.f_dist < f_min)
                    {
                        f_min = tempNode.f_dist;
                        nodeA = tempNode;
                    }
                }

                //tw.WriteLine();

                // End when the next node chosen is the endNode
                if (nodeA.Equals(endNode))
                    return (createNavPath(lastNode, endNode));

                /*
                 * Since A is chosen to move on from,
                 * Block it so it is not chosen again.
                 */
                potentialSet.Remove(nodeA);
                blockedSet.Add(nodeA);

                //tw.WriteLine("Checking nodes adjacent to Node " + nodeA.id);
                //tw.WriteLine("====================================");

                foreach (Node nodeB in nodeA.adjNodes)
                {
                    /*
                     * Add the next nearest node onto the path
                     */
                    if (!blockedSet.Contains(nodeB))
                    {
                        bool addNode;

                        //tw.WriteLine("Node " + nodeB.id + ": " +
                        //    "{pos - (" + nodeB.Position.X + ", " + nodeB.Position.Y + ", " + nodeB.Position.Z + ")}, " +
                        //    "{g = " + nodeB.g_dist + ", h = " + nodeB.h_dist + ", f = " + nodeB.f_dist + "}");

                        double g_temp = nodeA.g_dist + Vector3.Distance(nodeA.Position, nodeB.Position);

                        if (!potentialSet.Contains(nodeB))
                        {
                            // Add the node to the potential nodes
                            // if it is not already there.
                            potentialSet.Add(nodeB);
                            addNode = true;
                        }
                        else if (g_temp < nodeB.g_dist)
                            addNode = true;
                        else
                            addNode = false;

                        if (addNode)
                        {
                            // Add the node if either it was not in the
                            // potential node list yet or it was the next
                            // shortest node to traverse towards the end.
                            lastNode[nodeB] = nodeA;

                            nodeB.g_dist = g_temp;
                            nodeB.h_dist = Vector3.Distance(nodeB.Position, endNode.Position);
                            nodeB.f_dist = nodeB.g_dist + nodeB.h_dist;
                        }
                    }
                }

                //tw.WriteLine();
                //tw.WriteLine();
            }
            //tw.Close();
            return (null);
        }
Exemplo n.º 5
0
        public Node MoveAlongPath(List<Node> path, Node nextNode)
        {
            /*
             * Moves the agent along the generated path
             */
            Vector3 headingVector = Vector3.Forward;
            Matrix rotMatrix = Matrix.CreateRotationY(Heading);
            headingVector = Vector3.Transform(headingVector, rotMatrix);

            //get line connecting the current position to the next node
            Vector3 nextNodeVector = nextNode.Position - Position;

            //find the angle necessary to face the node
            double relativeAngle = Math.Atan2(headingVector.Z, headingVector.X) - Math.Atan2(nextNodeVector.Z, nextNodeVector.X);

            if (Vector3.Distance(this.Position, nextNode.Position) < 1)
            {
                nextNode.IsActive = false;
                if (!path.ElementAt(path.Count - 1).Equals(nextNode))
                {
                    nextNode = path.ElementAt(path.IndexOf(nextNode) + 1);
                    nextNode.IsActive = true;
                }
                return (nextNode);
            }
            else
            {
                if (relativeAngle < -0.1 || relativeAngle > 0.1)
                {
                    turn((float)MathHelper.WrapAngle((float)relativeAngle), m_TurnSpeed);
                }
                //else if (relativeAngle > 0.05)
                //{
                //    turn(-1, Game1.MAX_TURN_SPEED);
                //}
                else if (relativeAngle > -0.1 && relativeAngle < 0.1)
                {
                    Matrix orientationMatrix = Matrix.CreateRotationY(Heading);

                    Vector3 predictedPosition = Position;
                    Vector3 movement = new Vector3(0, 0, -1);

                    Vector3 speed = Vector3.Normalize(Vector3.Transform(movement, orientationMatrix)) * m_MaxSpeed;
                    predictedPosition = Position + speed;

                    BoundingSphere predictedSphere = m_BoundingSphere;
                    predictedSphere.Center.X = predictedPosition.X;
                    predictedSphere.Center.Z = predictedPosition.Z;

                    if (!WallCollision(predictedSphere, m_World.Walls) && !BlockCollision(predictedSphere, m_World.Blocks))
                    {
                        m_Position = predictedPosition;
                        m_BoundingSphere = predictedSphere;
                        //Console.WriteLine("Updated BoundingSpheres Agent " + m_ID + "\n" + m_Position + "\n" + m_BoundingSphere.Center);
                    }

                }

                return (nextNode);
            }
        }