/// <summary>
/// Handles Deferred Pay API calls
/// </summary>
/// <param name="contextHttp"></param>
private void DeferredPayment(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
ReceiverList receiverList = new ReceiverList();
receiverList.receiver = new List<Receiver>();
PayRequest request = new PayRequest();
Receiver rec = new Receiver();
RequestEnvelope requestEnvelope = new RequestEnvelope("en_US");
request.requestEnvelope = requestEnvelope;
// (Required) Amount to be paid to the receiver
if (parameters["amount"] != null && parameters["amount"].Trim() != string.Empty)
{
rec.amount = Convert.ToDecimal(parameters["amount"]);
}
// Receiver's email address. This address can be unregistered with
// paypal.com. If so, a receiver cannot claim the payment until a PayPal
// account is linked to the email address. The PayRequest must pass
// either an email address or a phone number. Maximum length: 127 characters
if (parameters["mail"] != null && parameters["mail"].Trim() != string.Empty)
{
rec.email = parameters["mail"];
}
receiverList.receiver.Add(rec);
ReceiverList receiverlst = new ReceiverList(receiverList.receiver);
request.receiverList = receiverlst;
// (Optional) Sender's email address. Maximum length: 127 characters
if (parameters["senderEmail"] != null && parameters["senderEmail"].Trim() != string.Empty)
{
request.senderEmail = parameters["senderEmail"];
}
// The action for this request. Possible values are: PAY – Use this
// option if you are not using the Pay request in combination with
// ExecutePayment. CREATE – Use this option to set up the payment
// instructions with SetPaymentOptions and then execute the payment at a
// later time with the ExecutePayment. PAY_PRIMARY – For chained
// payments only, specify this value to delay payments to the secondary
// receivers; only the payment to the primary receiver is processed.
if (parameters["actionType"] != null && parameters["actionType"].Trim() != string.Empty)
{
request.actionType = parameters["actionType"];
}
// URL to redirect the sender's browser to after canceling the approval
// for a payment; it is always required but only used for payments that
// require approval (explicit payments)
if (parameters["cancelURL"] != null && parameters["cancelURL"].Trim() != string.Empty)
{
request.cancelUrl = parameters["cancelURL"];
}
// The code for the currency in which the payment is made; you can
// specify only one currency, regardless of the number of receivers
if (parameters["currencyCode"] != null && parameters["currencyCode"].Trim() != string.Empty)
{
request.currencyCode = parameters["currencyCode"];
}
// URL to redirect the sender's browser to after the sender has logged
// into PayPal and approved a payment; it is always required but only
// used if a payment requires explicit approval
if (parameters["returnURL"] != null && parameters["returnURL"].Trim() != string.Empty)
{
request.returnUrl = parameters["returnURL"];
}
request.requestEnvelope = requestEnvelope;
// (Optional) The URL to which you want all IPN messages for this
// payment to be sent. Maximum length: 1024 characters
if (parameters["ipnNotificationURL"] != null && parameters["ipnNotificationURL"].Trim() != string.Empty)
{
request.ipnNotificationUrl = parameters["ipnNotificationURL"];
}
AdaptivePaymentsService service = null;
PayResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.Pay(request);
}
catch (System.Exception ex)
{
contextHttp.Response.Write(ex.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!response.responseEnvelope.ack.ToString().Trim().ToUpper().Equals(AckCode.FAILURE.ToString()) && !response.responseEnvelope.ack.ToString().Trim().ToUpper().Equals(AckCode.FAILUREWITHWARNING.ToString()))
{
redirectUrl = ConfigurationManager.AppSettings["PAYPAL_REDIRECT_URL"] + "_ap-payment&paykey=" + response.payKey;
// The pay key, which is a token you use in other Adaptive Payment APIs
// (such as the Refund Method) to identify this payment.
// The pay key is valid for 3 hours; the payment must be approved while the
// pay key is valid.
responseValues.Add("Pay Key", response.payKey);
// The status of the payment. Possible values are:
// CREATED – The payment request was received; funds will be transferred once the payment is approved
// COMPLETED – The payment was successful
// INCOMPLETE – Some transfers succeeded and some failed for a parallel payment or, for a delayed chained payment, secondary receivers have not been paid
// ERROR – The payment failed and all attempted transfers failed or all completed transfers were successfully reversed
// REVERSALERROR – One or more transfers failed when attempting to reverse a payment
// PROCESSING – The payment is in progress
// PENDING – The payment is awaiting processing
responseValues.Add("Payment Execution Status", response.paymentExecStatus);
if (response.defaultFundingPlan != null && response.defaultFundingPlan.senderFees != null)
{
//Fees to be paid by the sender.
responseValues.Add("Sender Fees", response.defaultFundingPlan.senderFees.amount + response.defaultFundingPlan.senderFees.code);
}
}
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString().Trim().ToUpper());
Display(contextHttp, "DeferredPayment", "AdaptivePayments", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle PaymentDetails API call
/// </summary>
/// <param name="context"></param>
private void PaymentDetails(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
PaymentDetailsRequest req = new PaymentDetailsRequest(new RequestEnvelope("en_US"));
// set optional parameters
if (parameters["payKey"] != "")
req.payKey = parameters["payKey"];
if (parameters["transactionId"] != "")
req.transactionId = parameters["transactionId"];
if (parameters["trackingId"] != "")
req.trackingId = parameters["trackingId"];
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
PaymentDetailsResponse resp = null;
try
{
resp = service.PaymentDetails(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
keyResponseParams.Add("Pay key", resp.payKey);
keyResponseParams.Add("Payment execution status", resp.status);
keyResponseParams.Add("Sender email", resp.senderEmail);
//Selenium Test Case
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
keyResponseParams.Add("Action Type", resp.actionType);
}
displayResponse(context, "PaymentDetails", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle PreapprovalDetails API call
/// </summary>
/// <param name="context"></param>
private void PreapprovalDetails(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
PreapprovalDetailsRequest req = new PreapprovalDetailsRequest(new RequestEnvelope("en_US"),
parameters["preapprovalKey"]);
// set optional parameters
if (parameters["getBillingAddress"] != "")
req.getBillingAddress = Boolean.Parse(parameters["getBillingAddress"]);
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
PreapprovalDetailsResponse resp = null;
try
{
resp = service.PreapprovalDetails(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
keyResponseParams.Add("Status", resp.status);
keyResponseParams.Add("Starting date", resp.startingDate);
keyResponseParams.Add("Ending date", resp.endingDate);
keyResponseParams.Add("Sender email", resp.senderEmail);
keyResponseParams.Add("Currency code", resp.currencyCode);
keyResponseParams.Add("Maximum amount (across all payments)", resp.maxTotalAmountOfAllPayments.ToString());
//Selenium Test Case
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
}
displayResponse(context, "PreapprovalDetails", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle GetPaymentOptions API call
/// </summary>
/// <param name="context"></param>
private void GetPaymentOptions(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
GetPaymentOptionsRequest req = new GetPaymentOptionsRequest(
new RequestEnvelope("en_US"), parameters["payKey"]);
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
GetPaymentOptionsResponse resp = null;
try
{
resp = service.GetPaymentOptions(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
int idx = 1;
foreach(ReceiverOptions option in resp.receiverOptions)
{
keyResponseParams.Add("Receiver option " + idx, option.description);
if(option.receiver.email != null)
keyResponseParams.Add("Receiver email " + idx, option.receiver.email);
idx++;
}
if(resp.displayOptions != null)
{
keyResponseParams.Add("Business name", resp.displayOptions.businessName);
keyResponseParams.Add("Header image", resp.displayOptions.headerImageUrl);
keyResponseParams.Add("Email header image", resp.displayOptions.emailHeaderImageUrl);
}
keyResponseParams.Add("Shipping address Id", resp.shippingAddressId);
//Selenium Test Case
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
}
displayResponse(context, "GetPaymentOptions", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle GetUserLimits API call
/// </summary>
/// <param name="context"></param>
private void GetUserLimits(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
List<string> limitType = new List<string>();
if(parameters["limitType"] != "")
limitType.Add(parameters["limitType"]);
AccountIdentifier accountId = new AccountIdentifier();
if (parameters["email"] != "")
{
accountId.email = parameters["email"];
}
if (parameters["phoneCountry"] != "" && parameters["phoneNumber"] != "")
{
accountId.phone = new PhoneNumberType(parameters["phoneCountry"], parameters["phoneNumber"]);
if (parameters["phoneExtension"] != "")
accountId.phone.extension = parameters["phoneExtension"];
}
GetUserLimitsRequest req = new GetUserLimitsRequest(
new RequestEnvelope("en_US"), accountId, parameters["country"],
parameters["currencyCode"], limitType);
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
GetUserLimitsResponse resp = null;
try
{
resp = service.GetUserLimits(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
int idx = 1;
foreach (UserLimit userLimit in resp.userLimit)
{
keyResponseParams.Add("Limit amount " + idx,
userLimit.limitAmount.amount + userLimit.limitAmount.code);
keyResponseParams.Add("Limit type " + idx, userLimit.limitType);
idx++;
}
}
displayResponse(context, "GetAvailableShippingAddresses", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle ConfirmPreapproval API call
/// </summary>
/// <param name="context"></param>
private void ConfirmPreapproval(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
ConfirmPreapprovalRequest req = new ConfirmPreapprovalRequest(new RequestEnvelope("en_US"),
parameters["preapprovalKey"]);
// Set optional parameters
if (parameters["pin"] != "")
req.pin = parameters["pin"];
if (parameters["fundingSourceId"] != "")
req.fundingSourceId = parameters["fundingSourceId"];
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
ConfirmPreapprovalResponse resp = null;
try
{
resp = service.ConfirmPreapproval(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
//nothing to add
}
displayResponse(context, "ConfirmPreapproval", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle ExecutePayment API call
/// </summary>
/// <param name="context"></param>
private void ExecutePayment(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
ExecutePaymentRequest req = new ExecutePaymentRequest(new RequestEnvelope("en_US"), parameters["payKey"]);
//Fix for release
req.fundingPlanId = parameters["fundingPlanId"];
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
ExecutePaymentResponse resp = null;
try
{
resp = service.ExecutePayment(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
keyResponseParams.Add("Payment exeucution status", resp.paymentExecStatus);
//Selenium Test Case
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
}
displayResponse(context, "ExecutePayment", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle GetUserLimits API call
/// </summary>
/// <param name="contextHttp"></param>
private void GetUserLimits(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
List<string> limitType = new List<string>();
if (parameters["limitType"] != string.Empty)
{
limitType.Add(parameters["limitType"]);
}
AccountIdentifier accountId = new AccountIdentifier();
if (parameters["email"] != string.Empty)
{
accountId.email = parameters["email"];
}
if (parameters["phoneCountry"] != string.Empty && parameters["phoneNumber"] != string.Empty)
{
accountId.phone = new PhoneNumberType(parameters["phoneCountry"], parameters["phoneNumber"]);
if (parameters["phoneExtension"] != string.Empty)
accountId.phone.extension = parameters["phoneExtension"];
}
GetUserLimitsRequest request = new GetUserLimitsRequest(
new RequestEnvelope("en_US"), accountId, parameters["country"],
parameters["currencyCode"], limitType);
AdaptivePaymentsService service = null;
GetUserLimitsResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.GetUserLimits(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
int idx = 1;
foreach (UserLimit userLimit in response.userLimit)
{
responseValues.Add("Limit amount " + idx,
userLimit.limitAmount.amount + userLimit.limitAmount.code);
responseValues.Add("Limit type " + idx, userLimit.limitType);
idx++;
}
}
Display(contextHttp, "GetUserLimits", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle PaymentDetails API call
/// </summary>
/// <param name="contextHttp"></param>
private void PaymentDetails(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
PaymentDetailsRequest request = new PaymentDetailsRequest(new RequestEnvelope("en_US"));
// set optional parameters
//(Optional) The pay key that identifies the payment for which
// you want to retrieve details. This is the pay key returned in the PayResponse message.
if (parameters["payKey"] != string.Empty)
request.payKey = parameters["payKey"];
// (Optional) The PayPal transaction ID associated with the payment.
// The IPN message associated with the payment contains the transaction ID.
if (parameters["transactionId"] != string.Empty)
request.transactionId = parameters["transactionId"];
// (Optional) The tracking ID that was specified for this payment
// in the PayRequest message. Maximum length: 127 characters
if (parameters["trackingId"] != string.Empty)
request.trackingId = parameters["trackingId"];
AdaptivePaymentsService service = null;
PaymentDetailsResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.PaymentDetails(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
//(Optional) The pay key that identifies the payment
responseValues.Add("Pay key", response.payKey);
// The status of the payment. Possible values are:
// CREATED – The payment request was received; funds will be transferred once the payment is approved
// COMPLETED – The payment was successful
// INCOMPLETE – Some transfers succeeded and some failed for a parallel payment or, for a delayed chained payment, secondary receivers have not been paid
// ERROR – The payment failed and all attempted transfers failed or all completed transfers were successfully reversed
// REVERSALERROR – One or more transfers failed when attempting to reverse a payment
// PROCESSING – The payment is in progress
// PENDING – The payment is awaiting processing
responseValues.Add("Payment execution status", response.status);
// The sender's email address.
responseValues.Add("Sender email", response.senderEmail);
//Acknowledgement code. It is one of the following values:
// Success – The operation completed successfully.
// Failure – The operation failed.
// SuccessWithWarning – The operation completed successfully; however, there is a warning message.
// FailureWithWarning – The operation failed with a warning message.
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
// Whether the Pay request is set up to create a payment request with the SetPaymentOptions
// request, and then fulfill the payment with the ExecutePayment request.
// Possible values are:
// PAY – Use this option if you are not using the Pay request in combination with ExecutePayment.
// CREATE – Use this option to set up the payment instructions with SetPaymentOptions and then execute the payment at a later time with the ExecutePayment.
// PAY_PRIMARY – For chained payments only, specify this value to delay payments to the secondary receivers; only the payment to the primary receiver is processed.
responseValues.Add("Action Type", response.actionType);
}
Display(contextHttp, "PaymentDetails", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle GetPaymentOptions API call
/// </summary>
/// <param name="contextHttp"></param>
private void GetPaymentOptions(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error
// messages are returned; by default it is en_US, which is the only language currently supported.
// paykey : (Required) The pay key that identifies the payment for which you want to get payment options.
// This is the pay key you used to set the payment options.
GetPaymentOptionsRequest request = new GetPaymentOptionsRequest(new RequestEnvelope("en_US"), parameters["payKey"]);
AdaptivePaymentsService service = null;
GetPaymentOptionsResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.GetPaymentOptions(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
int idx = 1;
foreach(ReceiverOptions option in response.receiverOptions)
{
// Specifies information about each receiver.
responseValues.Add("Receiver option " + idx, option.description);
if(option.receiver.email != null)
responseValues.Add("Receiver email " + idx, option.receiver.email);
idx++;
}
if(response.displayOptions != null)
{
// The business name to display.
// Note:
// The headerImageUrl and businessName parameters are mutually exclusive;
// only one of these fields can be used. If you specify both, the image will
// take precedence over the business name.
responseValues.Add("Business name", response.displayOptions.businessName);
// The URL of the image that displays in the header of a payment page.
// Use this to configure payment flows by passing a different image URL
// for different scenarios. If set, it overrides the header image URL
// specified in your account's Profile. The image dimensions
// are 90 pixels high x 750 pixels wide.
// Note:
// The headerImageUrl and businessName parameters are mutually exclusive;
// only one of these fields can be used. If you specify both, the image
// will take precedence over the business name.
responseValues.Add("Header image", response.displayOptions.headerImageUrl);
// The URL of the image that displays in the in the header of customer emails.
// The image dimensions are 43 pixels high x 240 pixels wide.
responseValues.Add("Email header image", response.displayOptions.emailHeaderImageUrl);
}
// Sender's shipping address ID.
responseValues.Add("Shipping address Id", response.shippingAddressId);
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
}
Display(contextHttp, "GetPaymentOptions", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle ExecutePayment API call
/// </summary>
/// <param name="contextHttp"></param>
private void ExecutePayment(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error
// messages are returned; by default it is en_US, which is the only language currently supported.
// paykey : (Optional) The pay key that identifies the payment to be executed.
// This is the pay key returned in the PayResponse message.
ExecutePaymentRequest request = new ExecutePaymentRequest(new RequestEnvelope("en_US"), parameters["payKey"]);
// (Optional) The ID of the funding plan from which to make this payment.
request.fundingPlanId = parameters["fundingPlanId"];
AdaptivePaymentsService service = null;
ExecutePaymentResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.ExecutePayment(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
//The status of the payment. Possible values are:
// CREATED – The payment request was received; funds will be transferred once the payment is approved
// COMPLETED – The payment was successful
// INCOMPLETE – Some transfers succeeded and some failed for a parallel payment
// ERROR – The payment failed and all attempted transfers failed or all completed transfers were successfully reversed
// REVERSALERROR – One or more transfers failed when attempting to reverse a payment
// Important: You must test the value of paymentExecStatus for an error even if
// responseEnvelope.ack is Success. If the PaymentExecStatus is ERROR,
// the Pay Key can no longer be used.
responseValues.Add("Payment exeucution status", response.paymentExecStatus);
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
}
Display(contextHttp, "ExecutePayment", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle SetPaymentOptions API call
/// </summary>
/// <param name="contextHttp"></param>
private void SetPaymentOptions(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error
// messages are returned; by default it is en_US, which is the only language currently supported.
// paykey : (Required) The pay key that identifies the payment for which you want
// to set payment options. This is the pay key returned in the PayResponse message.
SetPaymentOptionsRequest request = new SetPaymentOptionsRequest(new RequestEnvelope("en_US"), parameters["payKey"]);
if (parameters["institutionId"] != string.Empty)
{
request.initiatingEntity = new InitiatingEntity();
// institutionid : (Required) The unique identifier assigned to the institution
// firstname : (Required) The first name of the consumer as known by the institution.
// lastname: (Required) The last name of the consumer as known by the institution.
// displayname : (Required) The full name of the consumer as known by the institution.
// institutioncustomerid : (Required) The unique identifier assigned to the consumer by the institution
// countrycode : (Required) The two-character country code of the home country of the end consumer
// email : (Optional) The email address of the consumer as known by the institution.
request.initiatingEntity.institutionCustomer = new InstitutionCustomer(
parameters["institutionId"], parameters["firstName"],
parameters["lastName"], parameters["displayName"],
parameters["institutionCustomerId"], parameters["countryCode"]);
if (parameters["email"] != string.Empty)
{
request.initiatingEntity.institutionCustomer.email = parameters["email"];
}
}
if (parameters["emailHeaderImageUrl"] != string.Empty || parameters["emailMarketingImageUrl"] != string.Empty
|| parameters["headerImageUrl"] != string.Empty || parameters["businessName"] != string.Empty)
{
request.displayOptions = new DisplayOptions();
//(Optional) The URL of the image that displays in the in the header of customer emails.
// The URL cannot exceed 1,024 characters. The image dimensions are
// 43 pixels high x 240 pixels wide.
if (parameters["emailHeaderImageUrl"] != string.Empty )
request.displayOptions.emailHeaderImageUrl = parameters["emailHeaderImageUrl"];
//(Optional) The URL of the image that displays in the in customer emails.
// The URL cannot exceed 1,024 characters. The image dimensions are
// 80 pixels high x 530 pixels wide.
if (parameters["emailMarketingImageUrl"] != string.Empty)
request.displayOptions.emailMarketingImageUrl = parameters["emailMarketingImageUrl"];
// (Optional) The URL of an image that displays in the header of a payment page.
// If set, it overrides the header image URL specified in your account's Profile.
// The URL cannot exceed 1,024 characters. The image dimensions are
// 90 pixels high x 750 pixels wide.
if(parameters["headerImageUrl"] != string.Empty )
request.displayOptions.headerImageUrl = parameters["headerImageUrl"];
//(Optional) The business name to display. The name cannot exceed 128 characters.
if(parameters["businessName"] != string.Empty)
request.displayOptions.businessName = parameters["businessName"];
}
if (parameters["shippingAddressId"] != string.Empty)
{
// (Optional) Sender's shipping address ID.
request.shippingAddressId = parameters["shippingAddressId"];
}
if (parameters["requireShippingAddressSelection"] != string.Empty || parameters["referrerCode"] != string.Empty)
{
request.senderOptions = new SenderOptions();
//(Optional) If true, require the sender to select a shipping address during
//the embedded payment flow; default is false.
if (parameters["requireShippingAddressSelection"] != string.Empty)
request.senderOptions.requireShippingAddressSelection =
Convert.ToBoolean(parameters["requireShippingAddressSelection"]);
// (Optional) A code that identifies the partner associated with this transaction.
// Maximum length: 32 characters.
if (parameters["referrerCode"] != string.Empty)
request.senderOptions.referrerCode = parameters["referrerCode"];
}
request.receiverOptions = new List<ReceiverOptions>();
ReceiverOptions receiverOption = new ReceiverOptions();
request.receiverOptions.Add(receiverOption);
// (Optional) A description you want to associate with the payment.
// This overrides the value of the memo in Pay API for each receiver.
// If this is not specified the value in the memo will be used.
// Maximum length: 1000 characters
if (parameters["description"] != string.Empty)
receiverOption.description = parameters["description"];
// (Optional) An external reference or identifier you want to associate with the payment.
// Maximum length: 1000 characters
if (parameters["customId"] != string.Empty)
receiverOption.customId = parameters["customId"];
// (Optional) Name of item.
string[] name = contextHttp.Request.Form.GetValues("name");
// (Optional) External reference to item or item ID.
string[] identifier = contextHttp.Request.Form.GetValues("identifier");
// (Optional) Total of item line.
string[] price = contextHttp.Request.Form.GetValues("price");
// (Optional) Price of an individual item.
string[] itemPrice = contextHttp.Request.Form.GetValues("itemPrice");
// (Optional) Item quantity.
string[] itemCount = contextHttp.Request.Form.GetValues("itemCount");
if (name.Length > 0 && name[0] != string.Empty)
{
receiverOption.invoiceData = new InvoiceData();
for (int j = 0; j < name.Length; j++)
{
InvoiceItem item = new InvoiceItem();
if (name[j] != string.Empty)
item.name = name[j];
if (identifier[j] != string.Empty)
item.identifier = identifier[j];
if (price[j] != string.Empty)
item.price = Convert.ToDecimal(price[j]);
if (itemPrice[j] != string.Empty)
item.itemPrice = Convert.ToDecimal(itemPrice[j]);
if (itemCount[j] != string.Empty)
item.itemCount = Convert.ToInt32(itemCount[j]);
receiverOption.invoiceData.item.Add(item);
}
// (Optional) Total tax associated with the payment.
if (parameters["totalTax"] != string.Empty)
receiverOption.invoiceData.totalTax = Convert.ToDecimal(parameters["totalTax"]);
// (Optional) Total shipping charge associated with the payment.
if (parameters["totalShipping"] != string.Empty)
receiverOption.invoiceData.totalShipping = Convert.ToDecimal(parameters["totalShipping"]);
}
if (parameters["emailIdentifier"] != string.Empty ||
(parameters["phoneCountry"] != string.Empty && parameters["phoneNumber"] != string.Empty))
{
receiverOption.receiver = new ReceiverIdentifier();
// (Optional) Receiver's email address.Maximum length: 127 characters
if(parameters["emailIdentifier"] != string.Empty)
receiverOption.receiver.email = parameters["emailIdentifier"];
// (Optional) Receiver's phone number.
if (parameters["phoneCountry"] != string.Empty && parameters["phoneNumber"] != string.Empty)
{
receiverOption.receiver.phone =
new PhoneNumberType(parameters["phoneCountry"], parameters["phoneNumber"]);
// (Optional) Telephone extension.
if (parameters["phoneExtn"] != string.Empty)
receiverOption.receiver.phone.extension = parameters["phoneExtn"];
}
}
// (Optional) A code that identifies the partner associated with this transaction.
if (parameters["receiverReferrerCode"] != string.Empty)
receiverOption.referrerCode = parameters["receiverReferrerCode"];
AdaptivePaymentsService service = null;
SetPaymentOptionsResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.SetPaymentOptions(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
}
Display(contextHttp, "SetPaymentOptions", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, null);
}
/// <summary>
/// Handle GetAvailableShippingAddresses API call
/// </summary>
/// <param name="contextHttp"></param>
private void GetAvailableShippingAddresses(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error
// messages are returned; by default it is en_US, which is the only language currently supported.
// key : (Required) The payment paykey that identifies the account holder
GetAvailableShippingAddressesRequest request = new GetAvailableShippingAddressesRequest(
new RequestEnvelope("en_US"), parameters["key"]);
AdaptivePaymentsService service = null;
GetAvailableShippingAddressesResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.GetAvailableShippingAddresses(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
int idx = 1;
foreach(Address addr in response.availableAddress)
{
// The name associated with the address.
responseValues.Add("Address name " + idx, addr.addresseeName);
// The ID associated with the address.
responseValues.Add("Address Id " + idx, addr.addressId);
if (addr.baseAddress != null)
{
// Street address.
responseValues.Add("Address line " + idx, addr.baseAddress.line1);
// The city of the address.
responseValues.Add("City " + idx, addr.baseAddress.city);
// The state for the address
responseValues.Add("State " + idx, addr.baseAddress.state);
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
}
}
}
Display(contextHttp, "GetAvailableShippingAddresses", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handles Preapproval API calls
/// </summary>
/// <param name="contextHttp"></param>
private void Preapproval(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
PreapprovalRequest request = new PreapprovalRequest();
RequestEnvelope requestEnvelope = new RequestEnvelope("en_US");
request.requestEnvelope = requestEnvelope;
// (Optional) Sender's email address. Maximum length: 127 characters
if (parameters["senderEmail"] != null && parameters["senderEmail"].Trim() != string.Empty)
{
request.senderEmail = "*****@*****.**";
}
// (Optional) The day of the month on which a monthly payment is to be made.
// Allowable values are numbers between 0 and 31.
// A number between 1 and 31 indicates the date of the month.
// Specifying 0 indicates that payment can be made on any day of the month.
if (parameters["dateOfMonth"] != null && parameters["dateOfMonth"].Trim() != string.Empty)
{
request.dateOfMonth = Convert.ToInt32(parameters["dateOfMonth"]);
}
// (Optional) The day of the week that a weekly payment is to be made. Allowable values are:
// NO_DAY_SPECIFIED
// SUNDAY
// MONDAY
// TUESDAY
// WEDNESDAY
// THURSDAY
// FRIDAY
// SATURDAY
if (parameters["dayOfWeek"] != null && parameters["dayOfWeek"].Trim() != string.Empty)
{
request.dayOfWeek = (PayPal.AdaptivePayments.Model.DayOfWeek)
Enum.Parse(typeof(PayPal.AdaptivePayments.Model.DayOfWeek), parameters["dayOfWeek"]);
}
// (Optional) Whether to display the maximum total amount of this preapproval. It is one of the following values:
// TRUE – Display the amount
// FALSE – Do not display the amount (default)
if (parameters["displayMaxTotalAmount"] != null && parameters["displayMaxTotalAmount"].Trim() != string.Empty)
{
request.displayMaxTotalAmount = Convert.ToBoolean(parameters["displayMaxTotalAmount"]);
}
// (Optional) The URL to which you want all IPN messages for this preapproval to be sent.
// This URL supersedes the IPN notification URL in your profile.
// Maximum length: 1024 characters
if (parameters["ipnNotificationURL"] != null && parameters["ipnNotificationURL"].Trim() != string.Empty)
{
request.ipnNotificationUrl = parameters["ipnNotificationURL"];
}
// (Optional) The preapproved maximum amount per payment.
// It cannot exceed the preapproved maximum total amount of all payments.
if (parameters["maxAmountPerPayment"] != null && parameters["maxAmountPerPayment"].Trim() != string.Empty)
{
request.maxAmountPerPayment = Convert.ToDecimal(parameters["maxAmountPerPayment"]);
}
// (Optional) The preapproved maximum number of payments.
// It cannot exceed the preapproved maximum total number of all payments.
if (parameters["maxNumberOfPayments"] != null && parameters["maxNumberOfPayments"].Trim() != string.Empty)
{
request.maxNumberOfPayments = Convert.ToInt32(parameters["maxNumberOfPayments"]);
}
// (Optional) The preapproved maximum number of all payments per period.
// You must specify a value unless you have specific permission from PayPal.
if (parameters["maxNumberOfPaymentsPerPeriod"] != null && parameters["maxNumberOfPaymentsPerPeriod"].Trim() != string.Empty)
{
request.maxNumberOfPaymentsPerPeriod = Convert.ToInt32(parameters["maxNumberOfPaymentsPerPeriod"]);
}
// (Optional) The preapproved maximum total amount of all payments.
// It cannot exceed $2,000 USD or its equivalent in other currencies.
if (parameters["totalAmountOfAllPayments"] != null && parameters["totalAmountOfAllPayments"].Trim() != string.Empty)
{
request.maxTotalAmountOfAllPayments = Convert.ToDecimal(parameters["totalAmountOfAllPayments"]);
}
// (Optional) The payment period. It is one of the following values:
// NO_PERIOD_SPECIFIED
// DAILY – Each day
// WEEKLY – Each week
// BIWEEKLY – Every other week
// SEMIMONTHLY – Twice a month
// MONTHLY – Each month
// ANNUALLY – Each year
if (parameters["paymentPeriod"] != null && parameters["paymentPeriod"].Trim() != string.Empty)
{
request.paymentPeriod = parameters["paymentPeriod"];
}
// (Optional) Sender's email address. If not specified,
// the email address of the sender who logs in to approve
// the request becomes the email address associated with the preapproval key.
// Maximum length: 127 characters
if (parameters["senderEmail"] != null && parameters["senderEmail"].Trim() != string.Empty)
{
request.senderEmail = parameters["senderEmail"];
}
// The code for the currency in which the payment is made;
// you can specify only one currency, regardless of the number of receivers.
if (parameters["currencyCode"] != null && parameters["currencyCode"].Trim() != string.Empty)
{
request.currencyCode = parameters["currencyCode"];
}
// URL to redirect the sender's browser to after canceling the preapproval
if (parameters["cancelURL"] != null && parameters["cancelURL"].Trim() != string.Empty)
{
request.cancelUrl = parameters["cancelURL"];
}
// URL to redirect the sender's browser
// to after the sender has logged into PayPal and confirmed the preapproval.
if (parameters["returnURL"] != null && parameters["returnURL"].Trim() != string.Empty)
{
request.returnUrl = parameters["returnURL"];
}
request.requestEnvelope = requestEnvelope;
// First date for which the preapproval is valid.
// It cannot be before today's date or after the ending date.
if (parameters["startingDate"] != null && parameters["startingDate"].Trim() != string.Empty)
{
request.startingDate = parameters["startingDate"];
}
// Last date for which the preapproval is valid.
// It cannot be later than one year from the starting date.
// Contact PayPal if you do not want to specify an ending date.
if (parameters["endingDate"] != null && parameters["endingDate"].Trim() != string.Empty)
{
request.endingDate = parameters["endingDate"];
}
AdaptivePaymentsService service = null;
PreapprovalResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.Preapproval(request);
}
catch (System.Exception ex)
{
contextHttp.Response.Write(ex.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!response.responseEnvelope.ack.ToString().Trim().ToUpper().Equals(AckCode.FAILURE.ToString()) && !response.responseEnvelope.ack.ToString().Trim().ToUpper().Equals(AckCode.FAILUREWITHWARNING.ToString()))
{
// A preapproval key that identifies the preapproval requested.
responseValues.Add("Preapproval Key", response.preapprovalKey);
redirectUrl = ConfigurationManager.AppSettings["PAYPAL_REDIRECT_URL"] + "_ap-preapproval&preapprovalkey=" + response.preapprovalKey;
Session["preapprovalKey"] = response.preapprovalKey;
}
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString().Trim().ToUpper());
Display(contextHttp, "Preapproval", "AdaptivePayments", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle SetPaymentOptions API call
/// </summary>
/// <param name="context"></param>
private void SetPaymentOptions(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
SetPaymentOptionsRequest req = new SetPaymentOptionsRequest(
new RequestEnvelope("en_US"), parameters["payKey"]);
if (parameters["institutionId"] != "")
{
req.initiatingEntity = new InitiatingEntity();
req.initiatingEntity.institutionCustomer = new InstitutionCustomer(
parameters["institutionId"], parameters["firstName"],
parameters["lastName"], parameters["displayName"],
parameters["institutionCustomerId"], parameters["countryCode"]);
if (parameters["email"] != "")
{
req.initiatingEntity.institutionCustomer.email = parameters["email"];
}
}
if (parameters["emailHeaderImageUrl"] != "" || parameters["emailMarketingImageUrl"] != ""
|| parameters["headerImageUrl"] != "" || parameters["businessName"] != "")
{
req.displayOptions = new DisplayOptions();
if (parameters["emailHeaderImageUrl"] != "" )
req.displayOptions.emailHeaderImageUrl = parameters["emailHeaderImageUrl"];
if (parameters["emailMarketingImageUrl"] != "")
req.displayOptions.emailMarketingImageUrl = parameters["emailMarketingImageUrl"];
if(parameters["headerImageUrl"] != "" )
req.displayOptions.headerImageUrl = parameters["headerImageUrl"];
if(parameters["businessName"] != "")
req.displayOptions.businessName = parameters["businessName"];
}
if (parameters["shippingAddressId"] != "")
{
req.shippingAddressId = parameters["shippingAddressId"];
}
if (parameters["requireShippingAddressSelection"] != "" || parameters["referrerCode"] != "")
{
req.senderOptions = new SenderOptions();
if (parameters["requireShippingAddressSelection"] != "")
req.senderOptions.requireShippingAddressSelection =
Boolean.Parse(parameters["requireShippingAddressSelection"]);
if (parameters["referrerCode"] != "")
req.senderOptions.referrerCode = parameters["referrerCode"];
}
req.receiverOptions = new List<ReceiverOptions>();
ReceiverOptions receiverOption = new ReceiverOptions();
req.receiverOptions.Add(receiverOption);
if (parameters["description"] != "")
receiverOption.description = parameters["description"];
if (parameters["customId"] != "")
receiverOption.customId = parameters["customId"];
string[] name = context.Request.Form.GetValues("name");
string[] identifier = context.Request.Form.GetValues("identifier");
string[] price = context.Request.Form.GetValues("price");
string[] itemPrice = context.Request.Form.GetValues("itemPrice");
string[] itemCount = context.Request.Form.GetValues("itemCount");
if (name.Length > 0 && name[0] != "")
{
receiverOption.invoiceData = new InvoiceData();
for (int j = 0; j < name.Length; j++)
{
InvoiceItem item = new InvoiceItem();
if (name[j] != "")
item.name = name[j];
if (identifier[j] != "")
item.identifier = identifier[j];
if (price[j] != "")
item.price = Decimal.Parse(price[j]);
if (itemPrice[j] != "")
item.itemPrice = Decimal.Parse(itemPrice[j]);
if (itemCount[j] != "")
item.itemCount = Int32.Parse(itemCount[j]);
receiverOption.invoiceData.item.Add(item);
}
if (parameters["totalTax"] != "")
receiverOption.invoiceData.totalTax = Decimal.Parse(parameters["totalTax"]);
if (parameters["totalShipping"] != "")
receiverOption.invoiceData.totalShipping = Decimal.Parse(parameters["totalShipping"]);
}
if (parameters["emailIdentifier"] != "" ||
(parameters["phoneCountry"] != "" && parameters["phoneNumber"] != ""))
{
receiverOption.receiver = new ReceiverIdentifier();
if(parameters["emailIdentifier"] != "")
receiverOption.receiver.email = parameters["emailIdentifier"];
if (parameters["phoneCountry"] != "" && parameters["phoneNumber"] != "")
{
receiverOption.receiver.phone =
new PhoneNumberType(parameters["phoneCountry"], parameters["phoneNumber"]);
if (parameters["phoneExtn"] != "")
receiverOption.receiver.phone.extension = parameters["phoneExtn"];
}
}
if (parameters["receiverReferrerCode"] != "")
receiverOption.referrerCode = parameters["receiverReferrerCode"];
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
SetPaymentOptionsResponse resp = null;
try
{
resp = service.SetPaymentOptions(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
//Selenium Test Case
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
}
displayResponse(context, "SetPaymentOptions", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, null);
}
/// <summary>
/// Handle Preapproval API
/// </summary>
/// <param name="contextHttp"></param>
private void Preapproval(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error messages are returned; by default it is en_US, which is the only language currently supported.
// cancel url : URL to redirect the sender's browser to after canceling the preapproval
// currency code : The code for the currency in which the payment is made; you can specify only one currency, regardless of the number of receivers
// return url : URL to redirect the sender's browser to after the sender has logged into PayPal and confirmed the preapproval
// starting date : First date for which the preapproval is valid. It cannot be before today's date or after the ending date.
PreapprovalRequest request = new PreapprovalRequest(new RequestEnvelope("en_US"), parameters["cancelUrl"],
parameters["currencyCode"], parameters["returnUrl"], parameters["startingDate"]);
// (Optional) The day of the month on which a monthly payment is to be made.
// Allowable values are numbers between 0 and 31. A number between 1 and 31
// indicates the date of the month. Specifying 0 indicates that payment can be
// made on any day of the month.
if(parameters["dateOfMonth"] != string.Empty)
{
request.dateOfMonth = Convert.ToInt32(parameters["dateOfMonth"]);
}
// (Optional) The day of the week that a weekly payment is to be made.
// Allowable values are:
// NO_DAY_SPECIFIED
// SUNDAY
// MONDAY
// TUESDAY
// WEDNESDAY
// THURSDAY
// FRIDAY
// SATURDAY
if(parameters["dayOfWeek"] != string.Empty && parameters["dayOfWeek"] != string.Empty)
{
request.dayOfWeek = (PayPal.AdaptivePayments.Model.DayOfWeek)
Enum.Parse(typeof(PayPal.AdaptivePayments.Model.DayOfWeek), parameters["dayOfWeek"]);
}
//(Optional) The day of the month on which a monthly payment is to be made.
// Allowable values are numbers between 0 and 31. A number between 1 and 31
// indicates the date of the month. Specifying 0 indicates that payment
// can be made on any day of the month.
if(parameters["dateOfMonth"] != string.Empty)
{
request.dateOfMonth = Convert.ToInt32(parameters["dateOfMonth"]);
}
// xs:dateTime (Optional) Last date for which the preapproval is valid.
// It cannot be later than one year from the starting date.
// Note: You must specify a value unless you have specific permission
// from PayPal to omit this value.
if(parameters["endingDate"] != string.Empty)
{
request.endingDate = parameters["endingDate"];
}
// (Optional) The preapproved maximum amount per payment.
// It cannot exceed the preapproved maximum total amount of all payments.
if(parameters["maxAmountPerPayment"] != string.Empty)
{
request.maxAmountPerPayment = Convert.ToDecimal(parameters["maxAmountPerPayment"]);
}
// (Optional) The preapproved maximum number of payments.
// It cannot exceed the preapproved maximum total number of all payments.
if(parameters["maxNumberOfPayments"] != string.Empty )
{
request.maxNumberOfPayments = Convert.ToInt32(parameters["maxNumberOfPayments"]);
}
//(Optional) The preapproved maximum number of all payments per period.
// You must specify a value unless you have specific permission from PayPal.
if(parameters["maxNumberOfPaymentsPerPeriod"] != string.Empty)
{
request.maxNumberOfPaymentsPerPeriod = Convert.ToInt32(parameters["maxNumberOfPaymentsPerPeriod"]);
}
// The preapproved maximum total amount of all payments.
// It cannot exceed $2,000 USD or its equivalent in other currencies.
// Contact PayPal if you do not want to specify a maximum amount.
if(parameters["maxTotalAmountOfAllPayments"] != string.Empty)
{
request.maxTotalAmountOfAllPayments = Convert.ToDecimal(parameters["maxTotalAmountOfAllPayments"]);
}
//(Optional) The payment period. It is one of the following values:
// NO_PERIOD_SPECIFIED
// DAILY – Each day
// WEEKLY – Each week
// BIWEEKLY – Every other week
// SEMIMONTHLY – Twice a month
// MONTHLY – Each month
// ANNUALLY – Each year
if(parameters["paymentPeriod"] != string.Empty && parameters["paymentPeriod"] != string.Empty)
{
request.paymentPeriod = parameters["paymentPeriod"];
}
// (Optional) A note about the preapproval.
// Maximum length: 1000 characters, including newline characters
if(parameters["memo"] != string.Empty)
{
request.memo = parameters["memo"];
}
// Optional) The URL to which you want all IPN messages for
// this preapproval to be sent. This URL supersedes the
// IPN notification URL in your profile. Maximum length: 1024 characters
if(parameters["ipnNotificationUrl"] != string.Empty)
{
request.ipnNotificationUrl = parameters["ipnNotificationUrl"];
}
// (Optional) Sender's email address. If not specified, the email address
// of the sender who logs in to approve the request becomes the email address
// associated with the preapproval key. Maximum length: 127 characters
if(parameters["senderEmail"] != string.Empty)
{
request.senderEmail = parameters["senderEmail"];
}
// (Optional) Whether a personal identification number (PIN) is required.
// It is one of the following values:
// NOT_REQUIRED – A PIN is not required (default)
// REQUIRED – A PIN is required; the sender must specify a PIN when setting up the preapproval on PayPal
if(parameters["pinType"] != string.Empty && parameters["pinType"] != string.Empty)
{
request.pinType = parameters["pinType"];
}
// (Optional) The payer of PayPal fees. Allowable values are:
// SENDER – Sender pays all fees (for personal, implicit simple/parallel payments; do not use for chained or unilateral payments)
// PRIMARYRECEIVER – Primary receiver pays all fees (chained payments only)
// EACHRECEIVER – Each receiver pays their own fee (default, personal and unilateral payments)
// SECONDARYONLY – Secondary receivers pay all fees (use only for chained payments with one secondary receiver)
if(parameters["feesPayer"] != string.Empty)
{
request.feesPayer = parameters["feesPayer"];
}
//(Optional) Whether to display the maximum total amount of this preapproval. It is one of the following values:
// TRUE – Display the amount
// FALSE – Do not display the amount (default)
if (parameters["displayMaxTotalAmount"] != string.Empty)
{
request.displayMaxTotalAmount = Convert.ToBoolean(parameters["displayMaxTotalAmount"]);
}
AdaptivePaymentsService service = null;
PreapprovalResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.Preapproval(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
// A preapproval key that identifies the preapproval requested.
responseValues.Add("Preapproval key", response.preapprovalKey);
redirectUrl = ConfigurationManager.AppSettings["PAYPAL_REDIRECT_URL"]
+ "_ap-preapproval&preapprovalkey=" + response.preapprovalKey;
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
responseValues.Add("Redirect To PayPal", redirectUrl);
}
Display(contextHttp, "Preapproval", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle CancelPreapproval API call
/// </summary>
/// <param name="context"></param>
private void CancelPreapproval(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
CancelPreapprovalRequest req = new CancelPreapprovalRequest(new RequestEnvelope("en_US"),
parameters["preapprovalKey"]);
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
CancelPreapprovalResponse resp = null;
try
{
resp = service.CancelPreapproval(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
//Selenium Test Case
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
}
displayResponse(context, "CancelPreapproval", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle PreapprovalDetails API call
/// </summary>
/// <param name="contextHttp"></param>
private void PreapprovalDetails(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error messages are returned; by default it is en_US, which is the only language currently supported.
// preapproval key : (Required) A preapproval key that identifies the preapproval for which you want to retrieve details. The preapproval key is returned in the PreapprovalResponse message
PreapprovalDetailsRequest request = new PreapprovalDetailsRequest(new RequestEnvelope("en_US"),
parameters["preapprovalKey"]);
// (Optional) An option that lets you retrieve a list of billing addresses for the sender.
// true – Includes the billing address in the response
// false – Omits the billing address from the response (default)
// Note:
// This field is available only to API callers with advanced permission levels. For information, refer to the section Adaptive Payments Permission Levels.
if (parameters["getBillingAddress"] != string.Empty)
request.getBillingAddress = Convert.ToBoolean(parameters["getBillingAddress"]);
AdaptivePaymentsService service = null;
PreapprovalDetailsResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.PreapprovalDetails(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
//Whether this preapproval is active, represented by the following values:
// ACTIVE – The preapproval is active
// CANCELED – The preapproval was explicitly canceled by the sender or by PayPal
// DEACTIVATED – The preapproval is not active; you can reactivate it by resetting the personal identification number (PIN) or by contacting PayPal
responseValues.Add("Status", response.status);
// First date for which the preapproval is valid.
responseValues.Add("Starting date", response.startingDate);
// Last date for which the preapproval is valid. Time is currently not supported.
// Note:
// You must specify a value unless you have specific permission from PayPal to
// omit this value.
responseValues.Add("Ending date", response.endingDate);
// Sender’s email address. If not specified, the email address of
// the sender who logs in to approve the request becomes the email
// address associated with the preapproval key.
responseValues.Add("Sender email", response.senderEmail);
responseValues.Add("Currency code", response.currencyCode);
// The preapproved maximum total amount of all payments.
// Note:
// You must specify a value unless you have specific permission from PayPal to omit this value.
responseValues.Add("Maximum amount (across all payments)", response.maxTotalAmountOfAllPayments.ToString());
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
}
Display(contextHttp, "PreapprovalDetails", responseValues, service.getLastRequest(), service.getLastResponse(),
response.error, redirectUrl);
}
/// <summary>
/// Handle ConvertCurrency API call
/// </summary>
/// <param name="context"></param>
private void ConvertCurrency(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
string[] fromCurrencyCodes = context.Request.Form.GetValues("currencyCode");
string[] fromCurrencyAmounts = context.Request.Form.GetValues("currencyAmount");
string[] toCurrencyCodes = context.Request.Form.GetValues("toCurrencyCode");
List<CurrencyType> currencies = new List<CurrencyType>();
for(int i=0; i<fromCurrencyCodes.Length; i++)
{
currencies.Add(
new CurrencyType(fromCurrencyCodes[i], decimal.Parse(fromCurrencyAmounts[i]))
);
}
CurrencyList baseAmountList = new CurrencyList(currencies);
List<String> toCurrencyCodeList = new List<String>();
for (int i = 0; i < toCurrencyCodes.Length; i++)
toCurrencyCodeList.Add(toCurrencyCodes[i]);
CurrencyCodeList convertToCurrencyList = new CurrencyCodeList(toCurrencyCodeList);
ConvertCurrencyRequest req = new ConvertCurrencyRequest(
new RequestEnvelope("en_US"), baseAmountList, convertToCurrencyList);
// Add optional parameters
if (parameters["countryCode"] != "")
req.countryCode = parameters["countryCode"];
if (parameters["conversionType"] != "")
req.conversionType = parameters["conversionType"];
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
ConvertCurrencyResponse resp = null;
try
{
resp = service.ConvertCurrency(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
if (resp.estimatedAmountTable != null
&& resp.estimatedAmountTable.currencyConversionList != null)
{
int idx = 1;
foreach (CurrencyConversionList list in resp.estimatedAmountTable.currencyConversionList)
{
keyResponseParams.Add("Base amount " + idx,
list.baseAmount.amount + " " + list.baseAmount.code);
idx++;
}
}
//Selenium Test Case
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
}
displayResponse(context, "ConvertCurrency", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle ConfirmPreapproval API call
/// </summary>
/// <param name="contextHttp"></param>
private void ConfirmPreapproval(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error messages are returned; by default it is en_US, which is the only language currently supported.
// preapproval key : (Required) A preapproval key that identifies the preapproval for which you want to retrieve details. The preapproval key is returned in the PreapprovalResponse message
ConfirmPreapprovalRequest request = new ConfirmPreapprovalRequest(new RequestEnvelope("en_US"),
parameters["preapprovalKey"]);
// Set optional parameters
//The sender's personal identification number, which was specified
//when the sender signed up for a preapproval.
if (parameters["pin"] != string.Empty)
request.pin = parameters["pin"];
//Funding source ID.
if (parameters["fundingSourceId"] != string.Empty)
request.fundingSourceId = parameters["fundingSourceId"];
AdaptivePaymentsService service = null;
ConfirmPreapprovalResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.ConfirmPreapproval(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
//nothing to add
}
Display(contextHttp, "ConfirmPreapproval", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle GetFundingPlans API call
/// </summary>
/// <param name="context"></param>
private void GetFundingPlans(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
GetFundingPlansRequest req = new GetFundingPlansRequest(new RequestEnvelope("en_US"),
parameters["payKey"]);
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
GetFundingPlansResponse resp = null;
try
{
resp = service.GetFundingPlans(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
int idx = 1;
foreach (FundingPlan plan in resp.fundingPlan) {
keyResponseParams.Add("Funding plan Id " + idx, plan.fundingPlanId);
keyResponseParams.Add("Funding plan amount " + idx,
plan.fundingAmount.amount + plan.fundingAmount.code );
idx++;
}
}
displayResponse(context, "GetFundingPlans", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle Refund API call
/// </summary>
/// <param name="contextHttp"></param>
private void Refund(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error messages are returned; by default it is en_US, which is the only language currently supported.
RefundRequest request = new RefundRequest(new RequestEnvelope("en_US"));
// Set optional parameters
if(parameters["receiverEmail"].Length > 0)
{
//(Required) Amount to be paid to the receiver
string[] amt = contextHttp.Request.Form.GetValues("receiverAmount");
// Receiver's email address. This address can be unregistered with paypal.com.
// If so, a receiver cannot claim the payment until a PayPal account is linked
// to the email address. The PayRequest must pass either an email address or a phone number.
// Maximum length: 127 characters
string[] receiverEmail = contextHttp.Request.Form.GetValues("receiverEmail");
//Telephone country code
string[] phoneCountry = contextHttp.Request.Form.GetValues("phoneCountry");
// A type to specify the receiver's phone number.
// The PayRequest must pass either an email address or a phone number as the payment receiver.
string[] phoneNumber = contextHttp.Request.Form.GetValues("phoneNumber");
//Telephone extension
string[] phoneExtn = contextHttp.Request.Form.GetValues("phoneExtn");
// (Optional) Whether this receiver is the primary receiver,
// which makes the payment a chained payment.You can specify at most one primary receiver.
// Omit this field for simple and parallel payments. Allowable values are:
// true – Primary receiver
// false – Secondary receiver (default)
string[] primaryReceiver = contextHttp.Request.Form.GetValues("primaryReceiver");
// (Optional) Your own invoice or tracking number.
//Character length and limitations: 127 single-byte alphanumeric characters
string[] invoiceId = contextHttp.Request.Form.GetValues("invoiceId");
// (Optional) The transaction type for the payment. Allowable values are:
// GOODS – This is a payment for non-digital goods
// SERVICE – This is a payment for services (default)
// PERSONAL – This is a person-to-person payment
// CASHADVANCE – This is a person-to-person payment for a cash advance
// DIGITALGOODS – This is a payment for digital goods
// BANK_MANAGED_WITHDRAWAL – This is a person-to-person payment for bank withdrawals, available only with special permission.
string[] paymentType = contextHttp.Request.Form.GetValues("paymentType");
//(Optional) The transaction subtype for the payment.
string[] paymentSubType = contextHttp.Request.Form.GetValues("paymentSubType");
List<Receiver> receivers = new List<Receiver>();
for(int i=0; i<amt.Length; i++) {
Receiver r = new Receiver(Convert.ToDecimal(amt[i]));
r.email = receiverEmail[i];
r.primary = Convert.ToBoolean(primaryReceiver[i]);
if(invoiceId[i] != string.Empty) {
r.invoiceId = invoiceId[i];
}
if(paymentType[i] != string.Empty) {
r.paymentType = paymentType[i];
}
if(paymentSubType[i] != string.Empty) {
r.paymentSubType = paymentSubType[i];
}
if(phoneCountry[i] != string.Empty && phoneNumber[i] != string.Empty) {
r.phone = new PhoneNumberType(phoneCountry[i], phoneNumber[i]);
if(phoneExtn[i] != string.Empty) {
r.phone.extension = phoneExtn[i];
}
}
receivers.Add(r);
}
request.receiverList = new ReceiverList(receivers);
}
// PayPal uses 3-character ISO-4217 codes for specifying currencies in fields and variables.
if(parameters["currencyCode"] != string.Empty) {
request.currencyCode = parameters["currencyCode"];
}
// The key used to create the payment that you want to refund
if(parameters["payKey"] != string.Empty) {
request.payKey = parameters["payKey"];
}
// A PayPal transaction ID associated with the receiver whose payment
// you want to refund to the sender. Use field name characters exactly as shown.
if(parameters["transactionId"] != string.Empty) {
request.transactionId = parameters["transactionId"];
}
// The tracking ID associated with the payment that you want to refund
if(parameters["trackingId"] != string.Empty) {
request.trackingId = parameters["trackingId"];
}
AdaptivePaymentsService service = null;
RefundResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.Refund(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
responseValues.Add("Currency code", response.currencyCode);
int idx = 1;
foreach (RefundInfo refund in response.refundInfoList.refundInfo)
{
//Receiver's email address.Maximum length: 127 characters
responseValues.Add("Refund receiver " + idx, refund.receiver.email);
// Amount to be refunded to the receiver.
responseValues.Add("Refund amount " + idx, refund.receiver.amount.ToString());
// Status of the refund. It is one of the following values:
// REFUNDED – Refund successfully completed
// REFUNDED_PENDING – Refund awaiting transfer of funds; for example, a refund paid by eCheck.
// NOT_PAID – Payment was never made; therefore, it cannot be refunded.
// ALREADY_REVERSED_OR_REFUNDED – Request rejected because the refund was already made, or the payment was reversed prior to this request.
// NO_API_ACCESS_TO_RECEIVER – Request cannot be completed because you do not have third-party access from the receiver to make the refund.
// REFUND_NOT_ALLOWED – Refund is not allowed.
// INSUFFICIENT_BALANCE – Request rejected because the receiver from which the refund is to be paid does not have sufficient funds or the funding source cannot be used to make a refund.
// AMOUNT_EXCEEDS_REFUNDABLE – Request rejected because you attempted to refund more than the remaining amount of the payment; call the PaymentDetails API operation to determine the amount already refunded.
// PREVIOUS_REFUND_PENDING – Request rejected because a refund is currently pending for this part of the payment
// NOT_PROCESSED – Request rejected because it cannot be processed at this time
// REFUND_ERROR – Request rejected because of an internal error
// PREVIOUS_REFUND_ERROR – Request rejected because another part of this refund caused an internal error.
responseValues.Add("Refund status " + idx, refund.refundStatus);
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
}
}
Display(contextHttp, "Refund", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle GetShippingAddresses API call
/// </summary>
/// <param name="context"></param>
private void GetShippingAddresses(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
GetShippingAddressesRequest req = new GetShippingAddressesRequest(new RequestEnvelope("en_US"),
parameters["key"]);
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
GetShippingAddressesResponse resp = null;
try
{
resp = service.GetShippingAddresses(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
if (resp.selectedAddress != null)
{
keyResponseParams.Add("Address name", resp.selectedAddress.addresseeName);
keyResponseParams.Add("Address Id", resp.selectedAddress.addressId);
if (resp.selectedAddress.baseAddress != null)
{
keyResponseParams.Add("Address line", resp.selectedAddress.baseAddress.line1);
keyResponseParams.Add("City", resp.selectedAddress.baseAddress.city);
keyResponseParams.Add("State", resp.selectedAddress.baseAddress.state);
}
}
}
displayResponse(context, "GetShippingAddresses", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle Pay API calls
/// </summary>
/// <param name="contextHttp"></param>
private void Pay(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
ReceiverList receiverList = new ReceiverList();
receiverList.receiver = new List<Receiver>();
//(Required) Amount to be paid to the receiver
string[] amt = contextHttp.Request.Form.GetValues("receiverAmount");
// Receiver's email address. This address can be unregistered with paypal.com.
// If so, a receiver cannot claim the payment until a PayPal account is linked
// to the email address. The PayRequest must pass either an email address or a phone number.
// Maximum length: 127 characters
string[] receiverEmail = contextHttp.Request.Form.GetValues("receiverEmail");
//Telephone country code
string[] phoneCountry = contextHttp.Request.Form.GetValues("phoneCountry");
// A type to specify the receiver's phone number.
// The PayRequest must pass either an email address or a phone number as the payment receiver.
string[] phoneNumber = contextHttp.Request.Form.GetValues("phoneNumber");
//Telephone extension
string[] phoneExtn = contextHttp.Request.Form.GetValues("phoneExtn");
// (Optional) Whether this receiver is the primary receiver,
// which makes the payment a chained payment.You can specify at most one primary receiver.
// Omit this field for simple and parallel payments. Allowable values are:
// true – Primary receiver
// false – Secondary receiver (default)
string[] primaryReceiver = contextHttp.Request.Form.GetValues("primaryReceiver");
// (Optional) The invoice number for the payment.
// This data in this field shows on the Transaction Details report.
// Maximum length: 127 characters
string[] invoiceId = contextHttp.Request.Form.GetValues("invoiceId");
// (Optional) The transaction type for the payment. Allowable values are:
// GOODS – This is a payment for non-digital goods
// SERVICE – This is a payment for services (default)
// PERSONAL – This is a person-to-person payment
// CASHADVANCE – This is a person-to-person payment for a cash advance
// DIGITALGOODS – This is a payment for digital goods
// BANK_MANAGED_WITHDRAWAL – This is a person-to-person payment for bank withdrawals, available only with special permission.
string[] paymentType = contextHttp.Request.Form.GetValues("paymentType");
//(Optional) The transaction subtype for the payment.
string[] paymentSubType = contextHttp.Request.Form.GetValues("paymentSubType");
for (int i = 0; i < amt.Length; i++)
{
Receiver rec = new Receiver(Convert.ToDecimal(amt[i]));
if(receiverEmail[i] != string.Empty)
rec.email = receiverEmail[i];
if (phoneCountry[i] != string.Empty && phoneNumber[i] != string.Empty)
{
rec.phone = new PhoneNumberType(phoneCountry[i], phoneNumber[i]);
if (phoneExtn[i] != string.Empty)
{
rec.phone.extension = phoneExtn[i];
}
}
if (primaryReceiver[i] != string.Empty)
rec.primary = Convert.ToBoolean(primaryReceiver[i]);
if (invoiceId[i] != string.Empty)
rec.invoiceId = invoiceId[i];
if (paymentType[i] != string.Empty)
rec.paymentType = paymentType[i];
if (paymentSubType[i] != string.Empty)
rec.paymentSubType = paymentSubType[i];
receiverList.receiver.Add(rec);
}
PayRequest request = new PayRequest(new RequestEnvelope("en_US"), parameters["actionType"],
parameters["cancelUrl"], parameters["currencyCode"],
receiverList, parameters["returnUrl"]);
//Fix for release
if (parameters["ipnNotificationUrl"] != string.Empty)
{
request.ipnNotificationUrl = parameters["ipnNotificationUrl"];
}
//(Optional) A note associated with the payment (text, not HTML).
// Maximum length: 1000 characters, including newline characters
if (parameters["memo"] != string.Empty)
{
request.memo = parameters["memo"];
}
//The sender's personal identification number, which was specified
//when the sender signed up for a preapproval.
if (parameters["pin"] != string.Empty)
{
request.pin = parameters["pin"];
}
// (Optional) The key associated with a preapproval for this payment.
// The preapproval key is required if this is a preapproved payment.
// Note: The Preapproval API is unavailable to API callers with Standard permission levels.
if (parameters["preapprovalKey"] != string.Empty)
{
request.preapprovalKey = parameters["preapprovalKey"];
}
// set optional parameters
//(Optional) Whether to reverse parallel payments if an error occurs with a payment.
//Allowable values are:
//true – Each parallel payment is reversed if an error occurs
//false – Only incomplete payments are reversed (default)
if (parameters["reverseAllParallelPaymentsOnError"] != string.Empty)
request.reverseAllParallelPaymentsOnError =
Convert.ToBoolean(parameters["reverseAllParallelPaymentsOnError"]);
// Sender's email address
if (parameters["senderEmail"] != string.Empty)
request.senderEmail = parameters["senderEmail"];
//(Optional) A unique ID that you specify to track the payment.
//Note: You are responsible for ensuring that the ID is unique.
//Maximum length: 127 characters
if (parameters["trackingId"] != string.Empty)
request.trackingId = parameters["trackingId"];
// (Optional) Specifies a list of allowed funding types for the payment.
// This is a list of funding selections that can be combined in any order
// to allow payments to use the indicated funding type. If this Parameter is omitted,
// the payment can be funded by any funding type that is supported for Adaptive Payments.
// Note: FundingConstraint is unavailable to API callers with standard permission levels;
// for more information, refer to the section Adaptive Payments Permission Levels.
if (parameters["fundingConstraint"] != string.Empty)
{
request.fundingConstraint = new FundingConstraint();
request.fundingConstraint.allowedFundingType = new FundingTypeList();
request.fundingConstraint.allowedFundingType.fundingTypeInfo.Add(
new FundingTypeInfo(parameters["fundingConstraint"]));
}
if (parameters["emailIdentifier"] != string.Empty
|| (parameters["senderPhoneCountry"] != string.Empty && parameters["senderPhoneNumber"] != string.Empty)
|| parameters["useCredentials"] != string.Empty)
{
request.sender = new SenderIdentifier();
// (Optional) Sender's email address. Maximum length: 127 characters
if (parameters["emailIdentifier"] != string.Empty)
request.sender.email = parameters["emailIdentifier"];
// Sender Telephone country code
// Sender Telephone number
// Sender Telephone extension
if (parameters["senderPhoneCountry"] != string.Empty && parameters["senderPhoneNumber"] != string.Empty)
{
request.sender.phone = new PhoneNumberType(parameters["senderPhoneCountry"], parameters["senderPhoneNumber"]);
if (parameters["senderPhoneExtn"] != string.Empty)
request.sender.phone.extension = parameters["senderPhoneExtn"];
}
// (Optional) If true, use credentials to identify the sender; default is false.
if (parameters["useCredentials"] != string.Empty)
request.sender.useCredentials = Convert.ToBoolean(parameters["useCredentials"]);
}
AdaptivePaymentsService service = null;
PayResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.Pay(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if ( !(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING) )
{
redirectUrl = ConfigurationManager.AppSettings["PAYPAL_REDIRECT_URL"]
+ "_ap-payment&paykey=" + response.payKey;
// The pay key, which is a token you use in other Adaptive Payment APIs
// (such as the Refund Method) to identify this payment.
// The pay key is valid for 3 hours; the payment must be approved while the
// pay key is valid.
responseValues.Add("Pay key", response.payKey);
// The status of the payment. Possible values are:
// CREATED – The payment request was received; funds will be transferred once the payment is approved
// COMPLETED – The payment was successful
// INCOMPLETE – Some transfers succeeded and some failed for a parallel payment or, for a delayed chained payment, secondary receivers have not been paid
// ERROR – The payment failed and all attempted transfers failed or all completed transfers were successfully reversed
// REVERSALERROR – One or more transfers failed when attempting to reverse a payment
// PROCESSING – The payment is in progress
// PENDING – The payment is awaiting processing
responseValues.Add("Payment execution status", response.paymentExecStatus);
if (response.defaultFundingPlan != null && response.defaultFundingPlan.senderFees != null)
{
//Fees to be paid by the sender.
responseValues.Add("Sender fees", response.defaultFundingPlan.senderFees.amount +
response.defaultFundingPlan.senderFees.code);
}
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
}
Display(contextHttp, "Pay", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle Pay API calls
/// </summary>
/// <param name="context"></param>
private void Pay(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
ReceiverList receiverList = new ReceiverList();
receiverList.receiver = new List<Receiver>();
string[] amt = context.Request.Form.GetValues("receiverAmount");
string[] receiverEmail = context.Request.Form.GetValues("receiverEmail");
string[] phoneCountry = context.Request.Form.GetValues("phoneCountry");
string[] phoneNumber = context.Request.Form.GetValues("phoneNumber");
string[] phoneExtn = context.Request.Form.GetValues("phoneExtn");
string[] primaryReceiver = context.Request.Form.GetValues("primaryReceiver");
string[] invoiceId = context.Request.Form.GetValues("invoiceId");
string[] paymentType = context.Request.Form.GetValues("paymentType");
string[] paymentSubType = context.Request.Form.GetValues("paymentSubType");
for (int i = 0; i < amt.Length; i++)
{
Receiver rec = new Receiver(Decimal.Parse(amt[i]));
if(receiverEmail[i] != "")
rec.email = receiverEmail[i];
if (phoneCountry[i] != "" && phoneNumber[i] != "")
{
rec.phone = new PhoneNumberType(phoneCountry[i], phoneNumber[i]);
if (phoneExtn[i] != "")
{
rec.phone.extension = phoneExtn[i];
}
}
if (primaryReceiver[i] != "")
rec.primary = Boolean.Parse(primaryReceiver[i]);
if (invoiceId[i] != "")
rec.invoiceId = invoiceId[i];
if (paymentType[i] != "")
rec.paymentType = paymentType[i];
if (paymentSubType[i] != "")
rec.paymentSubType = paymentSubType[i];
receiverList.receiver.Add(rec);
}
PayRequest req = new PayRequest(new RequestEnvelope("en_US"), parameters["actionType"],
parameters["cancelUrl"], parameters["currencyCode"],
receiverList, parameters["returnUrl"]);
//Fix for release
if (parameters["ipnNotificationUrl"] != "")
{
req.ipnNotificationUrl = parameters["ipnNotificationUrl"];
}
if (parameters["memo"] != "")
{
req.memo = parameters["memo"];
}
if (parameters["pin"] != "")
{
req.pin = parameters["pin"];
}
if (parameters["preapprovalKey"] != "")
{
req.preapprovalKey = parameters["preapprovalKey"];
}
// set optional parameters
if (parameters["reverseAllParallelPaymentsOnError"] != "")
req.reverseAllParallelPaymentsOnError =
Boolean.Parse(parameters["reverseAllParallelPaymentsOnError"]);
if (parameters["senderEmail"] != "")
req.senderEmail = parameters["senderEmail"];
if (parameters["trackingId"] != "")
req.trackingId = parameters["trackingId"];
if (parameters["fundingConstraint"] != "")
{
req.fundingConstraint = new FundingConstraint();
req.fundingConstraint.allowedFundingType = new FundingTypeList();
req.fundingConstraint.allowedFundingType.fundingTypeInfo.Add(
new FundingTypeInfo(parameters["fundingConstraint"]));
}
if (parameters["emailIdentifier"] != ""
|| (parameters["senderPhoneCountry"] != "" && parameters["senderPhoneNumber"] != "")
|| parameters["useCredentials"] != "")
{
req.sender = new SenderIdentifier();
if (parameters["emailIdentifier"] != "")
req.sender.email = parameters["emailIdentifier"];
if (parameters["senderPhoneCountry"] != "" && parameters["senderPhoneNumber"] != "")
{
req.sender.phone = new PhoneNumberType(parameters["senderPhoneCountry"], parameters["senderPhoneNumber"]);
if (parameters["senderPhoneExtn"] != "")
req.sender.phone.extension = parameters["senderPhoneExtn"];
}
if (parameters["useCredentials"] != "")
req.sender.useCredentials = Boolean.Parse(parameters["useCredentials"]);
}
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
PayResponse resp = null;
try
{
resp = service.Pay(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if ( !(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING) )
{
redirectUrl = ConfigurationManager.AppSettings["PAYPAL_REDIRECT_URL"]
+ "_ap-payment&paykey=" + resp.payKey;
keyResponseParams.Add("Pay key", resp.payKey);
keyResponseParams.Add("Payment execution status", resp.paymentExecStatus);
if (resp.defaultFundingPlan != null && resp.defaultFundingPlan.senderFees != null)
{
keyResponseParams.Add("Sender fees", resp.defaultFundingPlan.senderFees.amount +
resp.defaultFundingPlan.senderFees.code);
}
//Selenium Test Case
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
}
displayResponse(context, "Pay", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle ConvertCurrency API call
/// </summary>
/// <param name="contextHttp"></param>
private void ConvertCurrency(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// (Required) The currency code
string[] fromCurrencyCodes = contextHttp.Request.Form.GetValues("currencyCode");
//(Required) The amount to be converted.
string[] fromCurrencyAmounts = contextHttp.Request.Form.GetValues("currencyAmount");
// (Required) The currency code
string[] toCurrencyCodes = contextHttp.Request.Form.GetValues("toCurrencyCode");
List<CurrencyType> currencies = new List<CurrencyType>();
for(int i=0; i<fromCurrencyCodes.Length; i++)
{
currencies.Add(
new CurrencyType(fromCurrencyCodes[i], Convert.ToDecimal(fromCurrencyAmounts[i]))
);
}
CurrencyList baseAmountList = new CurrencyList(currencies);
List<string> toCurrencyCodeList = new List<string>();
for (int i = 0; i < toCurrencyCodes.Length; i++)
toCurrencyCodeList.Add(toCurrencyCodes[i]);
CurrencyCodeList convertToCurrencyList = new CurrencyCodeList(toCurrencyCodeList);
ConvertCurrencyRequest request = new ConvertCurrencyRequest(
new RequestEnvelope("en_US"), baseAmountList, convertToCurrencyList);
// (Optional)The two-character ISO code for the country where the
// function is supposed to happen. The default value is US.
if (parameters["countryCode"] != string.Empty)
request.countryCode = parameters["countryCode"];
// (Optional)The conversion type allows you to determine the converted amounts
// for a PayPal user in different currency conversion scenarios, e.g.,
// sending a payment in a different currency than what this user holds,
// accepting payment in a different currency than what the user holds,
// or converting a balance to a different currency than the user holds..
// The default value is SENDER_SIDE .
if (parameters["conversionType"] != string.Empty)
request.conversionType = parameters["conversionType"];
AdaptivePaymentsService service = null;
ConvertCurrencyResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.ConvertCurrency(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
if (response.estimatedAmountTable != null
&& response.estimatedAmountTable.currencyConversionList != null)
{
int idx = 1;
//The list of converted currencies.
foreach (CurrencyConversionList list in response.estimatedAmountTable.currencyConversionList)
{
responseValues.Add("Base amount " + idx,
list.baseAmount.amount + " " + list.baseAmount.code);
idx++;
}
}
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString());
}
Display(contextHttp, "ConvertCurrency", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle Preapproval API
/// </summary>
/// <param name="context"></param>
private void Preapproval(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
PreapprovalRequest req = new PreapprovalRequest(new RequestEnvelope("en_US"), parameters["cancelUrl"],
parameters["currencyCode"], parameters["returnUrl"], parameters["startingDate"]);
// set optional parameters
if(parameters["dateOfMonth"] != "")
{
req.dateOfMonth = Int32.Parse(parameters["dateOfMonth"]);
}
if(parameters["dayOfWeek"] != "" && parameters["dayOfWeek"] != "")
{
req.dayOfWeek = (PayPal.AdaptivePayments.Model.DayOfWeek)
Enum.Parse(typeof(PayPal.AdaptivePayments.Model.DayOfWeek), parameters["dayOfWeek"]);
}
if(parameters["dateOfMonth"] != "")
{
req.dateOfMonth = Int32.Parse(parameters["dateOfMonth"]);
}
if(parameters["endingDate"] != "")
{
req.endingDate = parameters["endingDate"];
}
if(parameters["maxAmountPerPayment"] != "")
{
req.maxAmountPerPayment = Decimal.Parse(parameters["maxAmountPerPayment"]);
}
if(parameters["maxNumberOfPayments"] != "" )
{
req.maxNumberOfPayments = Int32.Parse(parameters["maxNumberOfPayments"]);
}
if(parameters["maxNumberOfPaymentsPerPeriod"] != "")
{
req.maxNumberOfPaymentsPerPeriod = Int32.Parse(parameters["maxNumberOfPaymentsPerPeriod"]);
}
if(parameters["maxTotalAmountOfAllPayments"] != "")
{
req.maxTotalAmountOfAllPayments = Decimal.Parse(parameters["maxTotalAmountOfAllPayments"]);
}
if(parameters["paymentPeriod"] != "" && parameters["paymentPeriod"] != "")
{
req.paymentPeriod = parameters["paymentPeriod"];
}
if(parameters["memo"] != "")
{
req.memo = parameters["memo"];
}
if(parameters["ipnNotificationUrl"] != "")
{
req.ipnNotificationUrl = parameters["ipnNotificationUrl"];
}
if(parameters["senderEmail"] != "")
{
req.senderEmail = parameters["senderEmail"];
}
if(parameters["pinType"] != "" && parameters["pinType"] != "")
{
req.pinType = parameters["pinType"];
}
if(parameters["feesPayer"] != "")
{
req.feesPayer = parameters["feesPayer"];
}
if (parameters["displayMaxTotalAmount"] != "")
{
req.displayMaxTotalAmount = Boolean.Parse(parameters["displayMaxTotalAmount"]);
}
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
PreapprovalResponse resp = null;
try
{
resp = service.Preapproval(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
keyResponseParams.Add("Preapproval key", resp.preapprovalKey);
//Selenium Test Case
redirectUrl = ConfigurationManager.AppSettings["PAYPAL_REDIRECT_URL"]
+ "_ap-preapproval&preapprovalkey=" + resp.preapprovalKey;
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
keyResponseParams.Add("Redirect To PayPal", redirectUrl);
}
displayResponse(context, "Preapproval", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handle GetAllowedFundingSources API call
/// </summary>
/// <param name="contextHttp"></param>
private void GetAllowedFundingSources(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
// error language : (Required) RFC 3066 language in which error messages are returned;
// by default it is en_US, which is the only language currently supported.
//key : (Required) The preapproval key that identifies the preapproval
GetAllowedFundingSourcesRequest request =
new GetAllowedFundingSourcesRequest(new RequestEnvelope("en_US"), parameters["key"]);
AdaptivePaymentsService service = null;
GetAllowedFundingSourcesResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.GetAllowedFundingSources(request);
}
catch (System.Exception e)
{
contextHttp.Response.Write(e.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
if (!(response.responseEnvelope.ack == AckCode.FAILURE) &&
!(response.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
int idx = 1;
foreach (FundingSource source in response.fundingSource)
{
responseValues.Add("Funding source id " + idx, source.fundingSourceId);
responseValues.Add("Funding source name " + idx, source.displayName);
idx++;
}
}
Display(contextHttp, "GetAllowedFundingSources", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}
/// <summary>
/// Handle Refund API call
/// </summary>
/// <param name="context"></param>
private void Refund(HttpContext context)
{
NameValueCollection parameters = context.Request.Params;
RefundRequest req = new RefundRequest(new RequestEnvelope("en_US"));
// Set optional parameters
if(parameters["receiverEmail"].Length > 0)
{
string[] amt = context.Request.Form.GetValues("receiverAmount");
string[] receiverEmail = context.Request.Form.GetValues("receiverEmail");
string[] phoneCountry = context.Request.Form.GetValues("phoneCountry");
string[] phoneNumber = context.Request.Form.GetValues("phoneNumber");
string[] phoneExtn = context.Request.Form.GetValues("phoneExtn");
string[] primaryReceiver = context.Request.Form.GetValues("primaryReceiver");
string[] invoiceId = context.Request.Form.GetValues("invoiceId");
string[] paymentType = context.Request.Form.GetValues("paymentType");
string[] paymentSubType = context.Request.Form.GetValues("paymentSubType");
List<Receiver> receivers = new List<Receiver>();
for(int i=0; i<amt.Length; i++) {
Receiver r = new Receiver(Decimal.Parse(amt[i]));
r.email = receiverEmail[i];
r.primary = Boolean.Parse(primaryReceiver[i]);
if(invoiceId[i] != "") {
r.invoiceId = invoiceId[i];
}
if(paymentType[i] != "") {
r.paymentType = paymentType[i];
}
if(paymentSubType[i] != "") {
r.paymentSubType = paymentSubType[i];
}
if(phoneCountry[i] != "" && phoneNumber[i] != "") {
r.phone = new PhoneNumberType(phoneCountry[i], phoneNumber[i]);
if(phoneExtn[i] != "") {
r.phone.extension = phoneExtn[i];
}
}
receivers.Add(r);
}
req.receiverList = new ReceiverList(receivers);
}
if(parameters["currencyCode"] != "") {
req.currencyCode = parameters["currencyCode"];
}
if(parameters["payKey"] != "") {
req.payKey = parameters["payKey"];
}
if(parameters["transactionId"] != "") {
req.transactionId = parameters["transactionId"];
}
if(parameters["trackingId"] != "") {
req.trackingId = parameters["trackingId"];
}
// All set. Fire the request
AdaptivePaymentsService service = new AdaptivePaymentsService();
RefundResponse resp = null;
try
{
resp = service.Refund(req);
}
catch (System.Exception e)
{
context.Response.Write(e.Message);
return;
}
// Display response values.
Dictionary<string, string> keyResponseParams = new Dictionary<string, string>();
string redirectUrl = null;
if (!(resp.responseEnvelope.ack == AckCode.FAILURE) &&
!(resp.responseEnvelope.ack == AckCode.FAILUREWITHWARNING))
{
keyResponseParams.Add("Currency code", resp.currencyCode);
int idx = 1;
foreach (RefundInfo refund in resp.refundInfoList.refundInfo)
{
keyResponseParams.Add("Refund receiver " + idx, refund.receiver.email);
keyResponseParams.Add("Refund amount " + idx, refund.receiver.amount.ToString());
keyResponseParams.Add("Refund status " + idx, refund.refundStatus);
//Selenium Test Case
keyResponseParams.Add("Acknowledgement", resp.responseEnvelope.ack.ToString());
}
}
displayResponse(context, "Refund", keyResponseParams, service.getLastRequest(), service.getLastResponse(),
resp.error, redirectUrl);
}
/// <summary>
/// Handles Preapproval Pay API calls
/// </summary>
/// <param name="contextHttp"></param>
private void PreapprovalPayment(HttpContext contextHttp)
{
NameValueCollection parameters = contextHttp.Request.Params;
PayRequest request = new PayRequest();
RequestEnvelope requestEnvelope = new RequestEnvelope("en_US");
request.requestEnvelope = requestEnvelope;
List<Receiver> receiverList = new List<Receiver>();
Receiver sampleReceiver = new Receiver();
// (Required) Amount to be paid to the receiver
if (parameters["amount"] != null && parameters["amount"].Trim() != string.Empty)
{
sampleReceiver.amount = Convert.ToDecimal(parameters["amount"]);
}
// Receiver's email address. This address can be unregistered with
// paypal.com. If so, a receiver cannot claim the payment until a PayPal
// account is linked to the email address. The PayRequest must pass
// either an email address or a phone number. Maximum length: 127 characters
if (parameters["mail"] != null && parameters["mail"].Trim() != string.Empty)
{
sampleReceiver.email = parameters["mail"];
}
receiverList.Add(sampleReceiver);
ReceiverList receiverlst = new ReceiverList(receiverList);
request.receiverList = receiverlst;
// Preapproval key for the approval set up between you and the sender
if (parameters["preapprovalKey"] != null && parameters["preapprovalKey"].Trim() != string.Empty)
{
request.preapprovalKey = parameters["preapprovalKey"];
}
// The action for this request. Possible values are: PAY – Use this
// option if you are not using the Pay request in combination with
// ExecutePayment. CREATE – Use this option to set up the payment
// instructions with SetPaymentOptions and then execute the payment at a
// later time with the ExecutePayment. PAY_PRIMARY – For chained
// payments only, specify this value to delay payments to the secondary
// receivers; only the payment to the primary receiver is processed.
if (parameters["actionType"] != null && parameters["actionType"].Trim() != string.Empty)
{
request.actionType = parameters["actionType"];
}
// URL to redirect the sender's browser to after canceling the approval
// for a payment; it is always required but only used for payments that
// require approval (explicit payments)
if (parameters["cancelURL"] != null && parameters["cancelURL"].Trim() != string.Empty)
{
request.cancelUrl = parameters["cancelURL"];
}
// The code for the currency in which the payment is made; you can
// specify only one currency, regardless of the number of receivers
if (parameters["currencyCode"] != null && parameters["currencyCode"].Trim() != string.Empty)
{
request.currencyCode = parameters["currencyCode"];
}
// URL to redirect the sender's browser to after the sender has logged
// into PayPal and approved a payment; it is always required but only
// used if a payment requires explicit approval
if (parameters["returnURL"] != null && parameters["returnURL"].Trim() != string.Empty)
{
request.returnUrl = parameters["returnURL"];
}
// (Optional) The URL to which you want all IPN messages for this
// payment to be sent. Maximum length: 1024 characters
if (parameters["ipnNotificationURL"] != null && parameters["ipnNotificationURL"].Trim() != string.Empty)
{
request.ipnNotificationUrl = parameters["ipnNotificationURL"];
}
AdaptivePaymentsService service = null;
PayResponse response = null;
try
{
// Configuration map containing signature credentials and other required configuration.
// For a full list of configuration parameters refer in wiki page
// (https://github.com/paypal/sdk-core-dotnet/wiki/SDK-Configuration-Parameters)
Dictionary<string, string> configurationMap = Configuration.GetAcctAndConfig();
// Creating service wrapper object to make an API call and loading
// configuration map for your credentials and endpoint
service = new AdaptivePaymentsService(configurationMap);
response = service.Pay(request);
}
catch (System.Exception ex)
{
contextHttp.Response.Write(ex.Message);
return;
}
Dictionary<string, string> responseValues = new Dictionary<string, string>();
string redirectUrl = null;
responseValues.Add("Acknowledgement", response.responseEnvelope.ack.ToString().Trim().ToUpper());
Display(contextHttp, "PreapprovalPayment", "AdaptivePayments", responseValues, service.getLastRequest(), service.getLastResponse(), response.error, redirectUrl);
}