public static bool Set_Pullup_State(bool p_enable)
{
bool result = false;
string text = "";
string text2 = "";
byte[] array = new byte[65];
byte[] array2 = new byte[65];
if (Utilities.m_flags.HID_DeviceReady != false) //(Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
Array.Clear(array, 0, array.Length);
Array.Clear(array2, 0, array2.Length);
if (!Basic.Get_Status_Packet(ref array2))
{
return(false);
}
if (p_enable)
{
byte[] expr_64_cp_0 = array2;
int expr_64_cp_1 = 16;
expr_64_cp_0[expr_64_cp_1] |= 16;
}
else
{
byte[] expr_7E_cp_0 = array2;
int expr_7E_cp_1 = 16;
expr_7E_cp_0[expr_7E_cp_1] &= 239;
}
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
result = USBWrite.write_and_verify_config_block(ref array, ref text2, false, ref text);
}
return(result);
}
public static bool Set_Baud_Rate(ushort p_baud)
{
bool flag = false;
string str = "";
string str2 = "";
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0x41];
if (!(Utilities.m_flags.HID_read_handle != IntPtr.Zero))
{
return(flag);
}
Array.Clear(array, 0, array.Length);
Array.Clear(buffer2, 0, buffer2.Length);
if (!Basic.Get_Status_Packet(ref buffer2))
{
return(false);
}
int num = ((int)Math.Round((double)((20000000.0 / ((double)p_baud)) / 4.0))) - 1;
buffer2[0x1d] = (byte)num;
buffer2[30] = (byte)(num >> 8);
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer2);
return(USBWrite.write_and_verify_config_block(ref array, ref str2, true, ref str));
}
public static bool Set_I2C_Bit_Rate(double p_Bit_Rate)
{
bool flag = false;
byte num = 0;
string str = "";
string str2 = "";
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0x41];
if ((p_Bit_Rate < 39.1) || (p_Bit_Rate > 5000.0))
{
return(flag);
}
if (!(Utilities.m_flags.HID_read_handle != IntPtr.Zero))
{
return(flag);
}
Array.Clear(array, 0, array.Length);
Array.Clear(buffer2, 0, buffer2.Length);
if (!Basic.Get_Status_Packet(ref buffer2))
{
return(false);
}
num = (byte)(Math.Round((double)((20000.0 / p_Bit_Rate) / 4.0)) - 1.0);
buffer2[30] = num;
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer2);
return(USBWrite.write_and_verify_config_block(ref array, ref str2, true, ref str));
}
public static bool Set_I2CSlave_Address_and_Mask(byte p_slave_addr, byte p_slave_mask)
{
bool result = false;
string text = "";
string text2 = "";
byte[] array = new byte[65];
byte[] array2 = new byte[65];
if (!Basic.Get_Status_Packet(ref array2))
{
return(false);
}
if (Utilities.m_flags.HID_DeviceReady != false) //(Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
Array.Clear(array, 0, array.Length);
Array.Clear(array2, 0, array2.Length);
if (!Basic.Get_Status_Packet(ref array2))
{
return(false);
}
array2[29] = p_slave_addr;
array2[30] = p_slave_mask;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
result = USBWrite.write_and_verify_config_block(ref array, ref text2, true, ref text);
}
return(result);
}
public static bool Configure_PICkitSerial_For_I2CSlave_Auto_Mode(byte p_slave_addr, byte p_slave_mask, byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str)
{
byte[] array = new byte[65];
byte[] array2 = new byte[255];
byte[] array3 = new byte[65];
bool result = false;
string text = "";
Array.Clear(array, 0, array.Length);
Array.Clear(array3, 0, array3.Length);
Mode.update_status_packet_data(7, ref array3);
array3[23] = 2;
array3[29] = p_slave_addr;
array3[30] = p_slave_mask;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array3);
USBWrite.Send_Cold_Reset_Cmd();
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
Array.Clear(array2, 0, array2.Length);
array2[0] = 0;
array2[1] = 5;
array2[2] = p_array_byte_count;
for (int i = 3; i < (int)(p_array_byte_count + 3); i++)
{
array2[i] = p_profile_array[i - 3];
}
USBWrite.Send_Script_To_PICkitS(ref array2);
USBWrite.Send_Warm_Reset_Cmd();
if (flag)
{
if (USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
int j;
for (j = 7; j < 31; j++)
{
if (Constants.STATUS_PACKET_DATA[j] != array[j - 5])
{
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", j - 7, Constants.STATUS_PACKET_DATA[j], array[j - 5]);
break;
}
}
if (j == 31)
{
result = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
}
else
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
}
}
else
{
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
}
return(result);
}
public static bool ReadBufferIsReady()
{
bool flag = false;
byte[] array = new byte[300];
byte num = 1;
byte[] buffer2 = new byte[1];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 3;
array[2] = 14;
array[3] = 0x81;
array[4] = 0x84;
array[5] = 2;
array[6] = 0x42;
array[7] = 0x88;
array[8] = 0x83;
array[9] = 0x84;
array[10] = 1;
array[11] = 0x43;
array[12] = 0x89;
array[13] = num;
array[14] = 130;
array[15] = 0x1f;
array[0x10] = 0x77;
array[0x11] = 0;
USBRead.Clear_Data_Array(num);
USBRead.Clear_Raw_Data_Array();
if ((USBWrite.Send_Script_To_PICkitS(ref array) && Utilities.m_flags.g_data_arrived_event.WaitOne(50, false)) && (USBRead.Retrieve_Data(ref buffer2, num) && (buffer2[0] == 1)))
{
flag = true;
}
return(flag);
}
public static bool Configure_PICkitSerial_For_I2CSlave_Default_Mode(byte p_slave_addr, byte p_slave_mask, byte p_read_byte_0_data, byte p_read_bytes_1_N_data)
{
bool result = false;
if (Basic.Configure_PICkitSerial(7, true))
{
string text = "";
string text2 = "";
byte[] array = new byte[65];
byte[] array2 = new byte[65];
if (Utilities.m_flags.HID_DeviceReady != false) //(Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
Array.Clear(array, 0, array.Length);
Array.Clear(array2, 0, array2.Length);
if (!Basic.Get_Status_Packet(ref array2))
{
return(false);
}
array2[23] = 0;
array2[27] = p_read_bytes_1_N_data;
array2[28] = p_read_byte_0_data;
array2[29] = p_slave_addr;
array2[30] = p_slave_mask;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
result = USBWrite.write_and_verify_config_block(ref array, ref text2, true, ref text);
}
}
return(result);
}
public static bool Read_One_BL_Flash_USB_Packet(ushort p_addr, byte p_byte_count, ref byte[] p_data)
{
bool result = false;
byte[] array = new byte[65];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 1;
array[2] = p_byte_count;
array[3] = (byte)p_addr;
array[4] = (byte)(p_addr >> 8);
array[5] = 0;
Utilities.m_flags.g_need_to_copy_bl_data = true;
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
if (flag)
{
bool flag2 = Utilities.m_flags.g_bl_data_arrived_event.WaitOne(1000, false);
if (flag2 && Utilities.m_flags.bl_buffer[1] == 1 && Utilities.m_flags.bl_buffer[2] == p_byte_count)
{
for (int i = 6; i < (int)(6 + p_byte_count); i++)
{
p_data[i - 6] = Utilities.m_flags.bl_buffer[i];
}
result = true;
}
}
return(result);
}
public static bool Read_BL_Config_Data(ref byte[] p_data)
{
byte b = 14;
bool result = false;
byte[] array = new byte[65];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 6;
array[2] = b;
array[3] = 0;
array[4] = 0;
array[5] = 48;
Utilities.m_flags.g_need_to_copy_bl_data = true;
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
if (flag)
{
bool flag2 = Utilities.m_flags.g_bl_data_arrived_event.WaitOne(1000, false);
if (flag2 && Utilities.m_flags.bl_buffer[1] == 6 && Utilities.m_flags.bl_buffer[2] == b)
{
for (int i = 6; i < (int)(6 + b); i++)
{
p_data[i - 6] = Utilities.m_flags.bl_buffer[i];
}
result = true;
}
}
return(result);
}
public static bool Write_BL_Config_Bytes(ref byte[] p_config_data, ref bool[] p_config_bool)
{
bool result = true;
byte[] array = new byte[65];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 7;
array[2] = 1;
array[3] = 0;
array[4] = 0;
array[5] = 48;
for (int i = 0; i < p_config_data.Length; i++)
{
if (p_config_bool[i])
{
array[3] = (byte)i;
array[6] = p_config_data[i];
Utilities.m_flags.g_need_to_copy_bl_data = true;
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
if (flag)
{
bool flag2 = Utilities.m_flags.g_bl_data_arrived_event.WaitOne(1000, false);
if (flag2 && (Utilities.m_flags.bl_buffer[1] != 7 || Utilities.m_flags.bl_buffer[2] != 1 || Utilities.m_flags.bl_buffer[3] != (byte)i))
{
result = false;
break;
}
}
}
}
return(result);
}
public static bool Clear_64_Bytes_of_Flash(ushort p_addr)
{
bool result = false;
byte[] array = new byte[65];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 3;
array[2] = 1;
array[3] = (byte)p_addr;
array[4] = (byte)(p_addr >> 8);
array[5] = 0;
Utilities.m_flags.g_need_to_copy_bl_data = true;
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
if (flag)
{
bool flag2 = Utilities.m_flags.g_bl_data_arrived_event.WaitOne(1000, false);
if (flag2 && Utilities.m_flags.bl_buffer[1] == 3 && Utilities.m_flags.bl_buffer[2] == 1 && Utilities.m_flags.bl_buffer[3] == (byte)p_addr)
{
result = true;
}
}
return(result);
}
public static bool Write_32_Bytes_to_Flash(ushort p_addr, ref byte[] p_data)
{
bool result = false;
byte[] array = new byte[65];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 2;
array[2] = 32;
array[3] = (byte)p_addr;
array[4] = (byte)(p_addr >> 8);
array[5] = 0;
for (int i = 0; i < 32; i++)
{
array[6 + i] = p_data[i];
}
Utilities.m_flags.g_need_to_copy_bl_data = true;
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
if (flag)
{
bool flag2 = Utilities.m_flags.g_bl_data_arrived_event.WaitOne(1000, false);
if (flag2 && Utilities.m_flags.bl_buffer[1] == 2 && Utilities.m_flags.bl_buffer[2] == 32 && Utilities.m_flags.bl_buffer[3] == (byte)p_addr)
{
result = true;
}
}
return(result);
}
public static bool WriteDefaultSettings()
{
bool result = false;
byte[] array = new byte[300];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 3;
array[2] = 8;
array[3] = 129;
array[4] = 132;
array[5] = 2;
array[6] = 66;
array[7] = 146;
array[8] = 130;
array[9] = 31;
array[10] = 119;
array[11] = 0;
bool flag = USBWrite.Send_Script_To_PICkitS(ref array);
if (flag)
{
result = true;
}
return(result);
}
public static bool Write(byte p_slave_addr, uint p_mem_addr, byte p_num_bytes_to_write, ref byte[] p_data_array)
{
byte[] array = new byte[300];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 3;
array[2] = (byte)(12 + p_num_bytes_to_write);
array[3] = 129;
array[4] = 132;
array[5] = (byte)(6 + p_num_bytes_to_write);
array[6] = p_slave_addr;
array[7] = 2;
array[8] = (byte)(p_mem_addr >> 16);
array[9] = (byte)(p_mem_addr >> 8);
array[10] = (byte)p_mem_addr;
array[11] = p_num_bytes_to_write;
int i;
for (i = 0; i < (int)p_num_bytes_to_write; i++)
{
array[i + 12] = p_data_array[i];
}
array[i + 12] = 130;
array[i + 13] = 31;
array[i + 14] = 119;
array[i + 15] = 0;
USBRead.Clear_Data_Array(0u);
USBRead.Clear_Raw_Data_Array();
return(USBWrite.Send_Script_To_PICkitS(ref array));
}
private static void flash_the_busy_led()
{
byte num = 0xc1;
string str = "";
string str2 = "";
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0x41];
if (Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
Array.Clear(array, 0, array.Length);
Array.Clear(buffer2, 0, buffer2.Length);
if (Get_Status_Packet(ref buffer2))
{
buffer2[7] = (byte)(buffer2[7] | 0x20);
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer2);
USBWrite.write_and_verify_config_block(ref array, ref str2, true, ref str);
if (USBWrite.Send_LED_State_Cmd(1, num))
{
buffer2[7] = (byte)(buffer2[7] & 0xdf);
Thread.Sleep(0x7d0);
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer2);
USBWrite.write_and_verify_config_block(ref array, ref str2, true, ref str);
}
}
}
}
private static bool there_is_room_in_cbuf1(byte p_num_bytes_to_write)
{
bool result = false;
int num = 0;
if (p_num_bytes_to_write > 255)
{
return(result);
}
if (p_num_bytes_to_write > USBWrite.m_cbuf1_avail_bytes)
{
while (p_num_bytes_to_write >= USBWrite.m_cbuf1_avail_bytes)
{
if (num++ >= 6)
{
break;
}
USBWrite.m_cbuf1_avail_bytes_mutex.WaitOne();
USBWrite.m_cbuf1_avail_bytes = USBWrite.this_many_bytes_are_actually_available_in_cbuf1();
USBWrite.m_cbuf1_avail_bytes_mutex.ReleaseMutex();
if (p_num_bytes_to_write < USBWrite.m_cbuf1_avail_bytes)
{
result = true;
break;
}
Thread.Sleep(100);
}
}
else
{
result = true;
}
return(result);
}
public static bool WriteTripGuardband(byte p_slave_addr, byte p_index, ushort p_trip, ushort p_guardband)
{
bool result = false;
byte[] array = new byte[300];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 3;
array[2] = 14;
array[3] = 129;
array[4] = 132;
array[5] = 8;
array[6] = p_slave_addr;
array[7] = 48;
array[8] = p_index;
array[9] = 1;
array[10] = (byte)(p_trip >> 8);
array[11] = (byte)p_trip;
array[12] = (byte)(p_guardband >> 8);
array[13] = (byte)p_guardband;
array[14] = 130;
array[15] = 31;
array[16] = 119;
array[17] = 0;
USBRead.Clear_Data_Array(0u);
USBRead.Clear_Raw_Data_Array();
if (USBWrite.Send_Script_To_PICkitS(ref array))
{
result = true;
}
return(result);
}
public static bool Send_Data_Packet_To_PICkitS(ref byte[] p_data)
{
bool result = true;
lock (USBWrite.m_priv_write_buffer_lock)
{
if (USBWrite.m_we_are_in_write_loop && (Utilities.m_flags.HID_DeviceReady != false))
{
for (int i = 0; i < Utilities.m_flags.write_buffer.Length; i++)
{
Utilities.m_flags.write_buffer[i] = p_data[i];
}
USBWrite.m_ready_to_write_event.Set();
if (!USBWrite.m_have_written_event.WaitOne(3000, false))
{
issue_Tell_Host_PKSA_Needs_Reset();
}
if (USBWrite.There_Was_A_Write_Error())
{
result = false;
}
}
else
{
string.Format("Error writing to USB device", new object[0]);
result = false;
}
}
return(result);
}
public static bool Create_User_Defined_Sensor_Group(byte p_sensor_count, ref byte[] p_sensor_array)
{
byte[] buffer = new byte[0x41];
buffer[0] = 0;
buffer[1] = 0x21;
buffer[2] = p_sensor_count;
for (int i = 3; i < (p_sensor_count + 3); i++)
{
buffer[i] = p_sensor_array[i - 3];
}
buffer[p_sensor_count + 3] = 0;
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref buffer);
byte num2 = 0;
byte[] buffer2 = new byte[0x11];
flag = Read_User_Defined_Sensor_Group(ref num2, ref buffer2);
if (flag && (num2 == p_sensor_count))
{
for (int j = 0; j < p_sensor_count; j++)
{
if (buffer2[j] != p_sensor_array[j])
{
return(false);
}
}
}
return(flag);
}
public static bool Send_LED_State_Cmd(int p_LED_num, byte p_value)
{
byte[] array = new byte[65];
Array.Clear(array, 0, array.Length);
array[1] = 3;
array[2] = 2;
switch (p_LED_num)
{
case 1:
array[3] = 18;
break;
case 2:
array[3] = 19;
break;
default:
return(false);
}
array[4] = p_value;
array[5] = 0;
bool result = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
USBWrite.Update_Status_Packet();
return(result);
}
public static bool Configure_PICkitSerial_For_I2CSlave_Interactive_Mode(byte p_slave_addr, byte p_slave_mask)
{
bool result = false;
string text = "";
string text2 = "";
byte[] array = new byte[65];
byte[] array2 = new byte[65];
if (!Basic.Get_Status_Packet(ref array2))
{
return(false);
}
byte b = array2[28];
byte b2 = array2[27];
if (Basic.Configure_PICkitSerial(7, true) && (Utilities.m_flags.HID_DeviceReady != false))
{
Array.Clear(array, 0, array.Length);
Array.Clear(array2, 0, array2.Length);
if (!Basic.Get_Status_Packet(ref array2))
{
return(false);
}
array2[23] = 1;
array2[27] = b2;
array2[28] = b;
array2[29] = p_slave_addr;
array2[30] = p_slave_mask;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
result = USBWrite.write_and_verify_config_block(ref array, ref text2, true, ref text);
}
return(result);
}
public static bool Set_Source_Voltage(double p_voltage)
{
bool result = false;
string text = "";
string text2 = "";
byte[] array = new byte[65];
byte[] array2 = new byte[65];
if (Utilities.m_flags.HID_DeviceReady != false) //(Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
if (p_voltage < 0.0 || p_voltage > 5.0)
{
return(result);
}
Array.Clear(array, 0, array.Length);
Array.Clear(array2, 0, array2.Length);
if (!Basic.Get_Status_Packet(ref array2))
{
return(false);
}
int num = (int)Math.Round((p_voltage * 1000.0 + 43.53) / 21.191);
array2[19] = (byte)num;
array2[20] = (byte)(num / 4);
byte[] expr_BA_cp_0 = array2;
int expr_BA_cp_1 = 16;
expr_BA_cp_0[expr_BA_cp_1] |= 32;
byte[] expr_D2_cp_0 = array2;
int expr_D2_cp_1 = 16;
expr_D2_cp_0[expr_D2_cp_1] |= 64;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
result = USBWrite.write_and_verify_config_block(ref array, ref text2, false, ref text);
}
return(result);
}
public static bool Send_Bytes(byte p_num_bytes_to_write, ref byte[] p_data_array, ref string p_script_view)
{
if (p_num_bytes_to_write > 253)
{
return(false);
}
byte[] array = new byte[300];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 3;
array[2] = (byte)(4 + p_num_bytes_to_write);
array[3] = 193;
array[4] = p_num_bytes_to_write;
int i;
for (i = 0; i < (int)p_num_bytes_to_write; i++)
{
array[i + 5] = p_data_array[i];
}
array[i + 5] = 31;
array[i + 6] = 119;
array[i + 7] = 0;
p_script_view = "[SB]";
string text = string.Format("[{0:X2}]", array[4]);
p_script_view += text;
for (i = 0; i < (int)p_num_bytes_to_write; i++)
{
text = string.Format("[{0:X2}]", array[i + 5]);
p_script_view += text;
}
USBRead.Clear_Data_Array(0u);
USBRead.Clear_Raw_Data_Array();
return(USBWrite.Send_Script_To_PICkitS(ref array));
}
public static bool Send_USART_Cmd(byte p_byte_count, ref byte[] p_data, ref string p_script_view)
{
byte[] array = new byte[255];
int num = 5;
p_script_view = "";
if (p_byte_count > 247)
{
return(false);
}
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 3;
array[2] = (byte)(p_byte_count + 4);
array[3] = 130;
array[4] = p_byte_count;
string text = string.Format("[{0:X2}]", p_byte_count);
for (int i = 0; i < (int)p_byte_count; i++)
{
array[num++] = p_data[i];
text = string.Format("[{0:X2}]", p_data[i]);
p_script_view += text;
}
array[num++] = 31;
array[num++] = 119;
array[num] = 0;
return(USBWrite.Send_Script_To_PICkitS(ref array));
}
public static bool Send_Data(byte p_byte_count, ref byte[] p_data_array, ref string p_script_view)
{
byte[] array = new byte[310];
int index = 5;
int num2 = 0;
string str = "";
p_script_view = "";
if (p_byte_count > 0xfb)
{
return(false);
}
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 3;
array[2] = (byte)(p_byte_count + 4);
array[3] = 130;
array[4] = p_byte_count;
str = string.Format("[{0:X2}]", p_byte_count);
for (num2 = 0; num2 < p_byte_count; num2++)
{
array[index++] = p_data_array[num2];
str = string.Format("[{0:X2}]", p_data_array[num2]);
p_script_view = p_script_view + str;
}
array[index++] = 0x1f;
array[index++] = 0x77;
array[index] = 0;
return(USBWrite.Send_Script_To_PICkitS(ref array));
}
private static void flash_the_busy_led()
{
byte p_value = 193;
string text = "";
string text2 = "";
byte[] array = new byte[65];
byte[] array2 = new byte[65];
if (Utilities.m_flags.HID_DeviceReady != false) //(Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
Array.Clear(array, 0, array.Length);
Array.Clear(array2, 0, array2.Length);
if (!Basic.Get_Status_Packet(ref array2))
{
return;
}
byte[] expr_66_cp_0 = array2;
int expr_66_cp_1 = 7;
expr_66_cp_0[expr_66_cp_1] |= 32;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
USBWrite.write_and_verify_config_block(ref array, ref text2, true, ref text);
if (USBWrite.Send_LED_State_Cmd(1, p_value))
{
byte[] expr_9E_cp_0 = array2;
int expr_9E_cp_1 = 7;
expr_9E_cp_0[expr_9E_cp_1] &= 223;
Thread.Sleep(2000);
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
USBWrite.write_and_verify_config_block(ref array, ref text2, true, ref text);
}
}
}
public static bool Set_Source_Voltage(double p_voltage)
{
bool flag = false;
int num = 0;
string str = "";
string str2 = "";
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0x41];
if (!(Utilities.m_flags.HID_read_handle != IntPtr.Zero))
{
return(flag);
}
if ((p_voltage < 0.0) || (p_voltage > 5.0))
{
return(flag);
}
Array.Clear(array, 0, array.Length);
Array.Clear(buffer2, 0, buffer2.Length);
if (!Basic.Get_Status_Packet(ref buffer2))
{
return(false);
}
num = (int)Math.Round((double)(((p_voltage * 1000.0) + 43.53) / 21.191));
buffer2[0x13] = (byte)num;
buffer2[20] = (byte)(num / 4);
buffer2[0x10] = (byte)(buffer2[0x10] | 0x20);
buffer2[0x10] = (byte)(buffer2[0x10] | 0x40);
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer2);
return(USBWrite.write_and_verify_config_block(ref array, ref str2, false, ref str));
}
private static void Reset_Control_Block_Thread()
{
m_reset_cb.WaitOne();
string str = "";
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0x41];
string str2 = "";
Array.Clear(array, 0, array.Length);
Array.Clear(buffer2, 0, buffer2.Length);
I2CS.reset_buffers();
if (USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
for (int i = 0; i < array.Length; i++)
{
array[i] = Constants.STATUS_PACKET_DATA[i];
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
USBWrite.configure_outbound_control_block_packet(ref buffer2, ref str, ref array);
USBWrite.write_and_verify_config_block(ref buffer2, ref str, true, ref str2);
}
m_reset_cb.ReleaseMutex();
}
public static bool Set_Pullup_State(bool p_enable)
{
bool flag = false;
string str = "";
string str2 = "";
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0x41];
if (!(Utilities.m_flags.HID_read_handle != IntPtr.Zero))
{
return(flag);
}
Array.Clear(array, 0, array.Length);
Array.Clear(buffer2, 0, buffer2.Length);
if (!Basic.Get_Status_Packet(ref buffer2))
{
return(false);
}
if (p_enable)
{
buffer2[0x10] = (byte)(buffer2[0x10] | 0x10);
}
else
{
buffer2[0x10] = (byte)(buffer2[0x10] & 0xef);
}
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer2);
return(USBWrite.write_and_verify_config_block(ref array, ref str2, false, ref str));
}
public static bool Set_I2C_Bit_Rate(double p_Bit_Rate)
{
bool result = false;
string text = "";
string text2 = "";
byte[] array = new byte[65];
byte[] array2 = new byte[65];
if (p_Bit_Rate < 39.1 || p_Bit_Rate > 5000.0)
{
return(result);
}
if (Utilities.m_flags.HID_DeviceReady != false) //(Utilities.m_flags.HID_read_handle != IntPtr.Zero)
{
Array.Clear(array, 0, array.Length);
Array.Clear(array2, 0, array2.Length);
if (!Basic.Get_Status_Packet(ref array2))
{
return(false);
}
byte b = (byte)(Math.Round(20000.0 / p_Bit_Rate / 4.0) - 1.0);
array2[30] = b;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array2);
result = USBWrite.write_and_verify_config_block(ref array, ref text2, true, ref text);
}
return(result);
}
