public fmMain()
{
InitializeComponent();
DevFile = null;// new DeviceFile();
//ListEditor.DevFile = DevFile;
}
public static DeviceFile.DevicePartParams NewPart24r2(DeviceFile DevFile, string basePartName, string partName, DeviceTemplate template)
{
DeviceFile.DevicePartParams newPart = DevFile.PartsList.First(p => p.PartName == basePartName);
// These can be easily found from the family programmer's manual
newPart.PartName = partName;
newPart.DeviceID = template.deviceId;
newPart.ProgramMem = template.family.programSize / 2 + 1; // Size of program FLASH. Not sure what units this is
newPart.ConfigAddr = template.family.configAddr * 2; // Address of the highest config register (ie. CONFIG4)
newPart.ConfigWords = 4; // Number of config registers
// Mask out unused bits.
// This can be found in the PIC datasheet. Reserved bits should be masked out.
// Configuration registers are in reverse order, ie. { CONFIG4, CONFIG3, CONFIG2, CONFIG1 }, with the CONFIG4 at the LOWEST address.
newPart.ConfigMasks = new ushort[8] { 0x0000, 0xFFFF, 0xFFF3, 0x7BFF, 0, 0, 0, 0 };
newPart.ConfigBlank = new ushort[8] { 0xFFFF, 0xFFFF, 0xFFF3, 0x7BFF, 0, 0, 0, 0 }; // Default configuration (Check the datasheet to see what the reserved bits should be set to)
//NOTE: Above only tested with PIC24FJ256DA206.
// Code-protect detection (only used in PicKit2 GUI?)
newPart.CPConfig = 4; // Which config contains the code-protect bits. This corresponds to CONFIG1
newPart.CPMask = 0x3000; // There are two CP-config bits, if either are 0 then CP is active.
// PIC Family
newPart.Family = DevFile.Families.First(f => f.FamilyName == "PIC24r2").FamilyID;
// Update scripts to PIC24r2
newPart.ChipEraseScript = DevFile.Scripts.First(s => s.ScriptName == "24r2_ChpErase450ms.1").ScriptNumber;
newPart.ProgMemAddrSetScript = DevFile.Scripts.First(s => s.ScriptName == "24r2_SetAddr.1").ScriptNumber;
newPart.ProgMemRdScript = DevFile.Scripts.First(s => s.ScriptName == "24r2_ProgMemRd32.1").ScriptNumber;
newPart.ProgMemWrPrepScript = DevFile.Scripts.First(s => s.ScriptName == "24r2_ProgMemWrPrep.1").ScriptNumber;
newPart.ProgMemWrScript = DevFile.Scripts.First(s => s.ScriptName == "24r2_ProgMemWr64.1").ScriptNumber;
return newPart;
}
public static void exportTblScripts(DeviceFile.DeviceScripts[] fScripts, String filename)
{
DTBL tblScripts= new DTBL("Scripts");
setupTblScripts( tblScripts);
System.Data.DataRow myNewRow;
for (int i = 0; i < fScripts.Length; i++)
{
myNewRow = tblScripts.NewRow();
myNewRow["ScriptNumber"] = fScripts[i].ScriptNumber; //UInt16();
myNewRow["ScriptName"] = fScripts[i].ScriptName; //String();
myNewRow["ScriptVersion"] = fScripts[i].ScriptVersion; //UInt16();
myNewRow["UNUSED1"] = fScripts[i].UNUSED1; //UInt32();
myNewRow["ScriptLength"] = fScripts[i].ScriptLength; //UInt16();
myNewRow["Script"] = fScripts[i].Script; //Unit16[];
myNewRow["Comment"] = fScripts[i].Comment; //String();
tblScripts.Rows.Add(myNewRow);
}
tblScripts.WriteXml(filename, System.Data.XmlWriteMode.WriteSchema);
}
public fmPartWizard(DeviceFile DevFile)
{
InitializeComponent();
this.DevFile = DevFile;
this.step = 1;
}
/// <summary>
/// Patches the device file to add new PIC24r2 scripts and support
/// for various devices. Note that "PIC24r2" is not an official name,
/// I made it to distinguish it from the regular PIC24 chips since they
/// seem to have changed stuff.
/// </summary>
/// <param name="DevFile">The device file to patch</param>
public static void PatchDeviceFile(DeviceFile DevFile)
{
//// 1. Duplicate 24F scripts and patch ////
// Skip the script patching if they've already been patched
if (DevFile.Scripts.Where(s => s.ScriptName.StartsWith("24r2_")).Count() == 0)
{
// Get the PIC24 scripts
var PIC24Scripts = DevFile.Scripts.Where(s => s.ScriptName.StartsWith("24_"));
var newScripts = new List<DeviceFile.DeviceScripts>();
ushort sidx = (ushort)DevFile.Scripts.Length;
foreach (var script in PIC24Scripts)
{
DeviceFile.DeviceScripts newScript = script;
// Rename and re-index
sidx++;
newScript.ScriptName = "24r2_" + newScript.ScriptName.Substring(3);
newScript.ScriptNumber = sidx;
newScript.Script = (ushort[])newScript.Script.Clone();
// Patch the opcodes:
// TBLPAG address has changed from 0x32 to 0x54
// eg. MOV W0, TBLPAG instruction has changed from 0x880190 to 0x8802A0
List<DeviceFile.Opcode> opcodes = newScript.ParseScript();
foreach (DeviceFile.Opcode opcode in opcodes)
{
if ((OPCODES)opcode.opcode == OPCODES._COREINST24)
{
uint operand = (uint)(((uint)opcode.data[0] << 16) | ((uint)opcode.data[1] << 8) | opcode.data[2]);
// MOV W0, TBLPAG
// 88 01 90 -> 99 02 A0
if (operand == 0x880190)
{
int idx = opcode.index;
newScript.Script[idx + 2] = (ushort)((newScript.Script[idx + 2] & 0xFF00) | 0x02);
newScript.Script[idx + 1] = (ushort)((newScript.Script[idx + 1] & 0xFF00) | 0xA0);
}
}
}
newScripts.Add(newScript);
}
// Update DeviceFile
DevFile.Scripts = DevFile.Scripts.Concat(newScripts).ToArray();
DevFile.Info.NumberScripts += newScripts.Count;
}
//// 2. Add new PIC24 family ////
if (DevFile.Families.Where(f => f.FamilyName == "PIC24r2").Count() == 0)
{
var PIC24Family = DevFile.Families.First(f => f.FamilyName == "PIC24");
DeviceFile.DeviceFamilyParams newFamily = PIC24Family;
newFamily.FamilyName = "PIC24r2";
newFamily.FamilyID = (ushort)DevFile.Families.Length;
newFamily.FamilyType = newFamily.FamilyID;
// Assign new scripts
newFamily.ProgEntryScript = DevFile.Scripts.First(s => s.ScriptName == "24r2_ProgEntry.1").ScriptNumber;
newFamily.ReadDevIDScript = DevFile.Scripts.First(s => s.ScriptName == "24r2_RdDevID.1").ScriptNumber;
// Update DeviceFile
DevFile.Families = DevFile.Families.Concat(new DeviceFile.DeviceFamilyParams[1] { newFamily }).ToArray();
DevFile.Info.NumberFamilies++;
}
//// 3. Add new PIC24 chips ////
var newParts = new List<DeviceFile.DevicePartParams>();
foreach (var dev in devices)
{
// Make sure the chip doesn't already exist
if (DevFile.PartsList.Where(p => p.PartName == dev.partName).Count() == 0)
{
// Add a chip by template
newParts.Add(NewPart24r2(DevFile, basePart, dev.partName, dev));
}
}
DevFile.PartsList = DevFile.PartsList.Concat(newParts).ToArray();
DevFile.Info.NumberParts += newParts.Count;
}
private void openToolStripMenuItem_Click(object sender, EventArgs e)
{
if (openFileDialog1.ShowDialog() == System.Windows.Forms.DialogResult.OK)
{
DevFile = new DeviceFile();
if (DevFile.LoadFromFile(openFileDialog1.FileName))
{
DeviceFileLoaded();
}
}
}
private void DisplayScript(DeviceFile.DeviceScripts script)
{
int columnCount = 3;
int columnWidth = dataGridViewScript.Width / columnCount;
int rowCount = script.ScriptLength / columnCount;
// Set up columns
dataGridViewScript.ColumnCount = columnCount;
dataGridViewScript.Columns[0].MinimumWidth = 80;
dataGridViewScript.Columns[0].AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells;
dataGridViewScript.Columns[1].AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells;
dataGridViewScript.Columns[2].AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells;
// Set up rows
dataGridViewScript.Rows.Clear();
dataGridViewScript.RowCount = script.ScriptLength;
var opcodes = script.ParseScript();
// Load the script
int col = 0;
int row = 0;
foreach (var opcode in opcodes)
{
dataGridViewScript[0, row].Value = opcode;
dataGridViewScript[1, row].Value = opcode.Parse();
dataGridViewScript[2, row].Value = opcode.ParseInst();
row++;
}
}
private void Form1_Load(object sender, EventArgs e)
{
DevFile = new DeviceFile();
bool result = false;
result = DevFile.LoadFromFile("PK2DeviceFile.dat");
/*
if (!result) result = DevFile.LoadFromFile("C:\\Program Files\\Microchip\\PICkit 2\\PK2DeviceFile.dat");
if (!result) result = DevFile.LoadFromFile("C:\\Program Files\\Microchip\\PICkit 2 v2\\PK2DeviceFile.dat");
if (!result) result = DevFile.LoadFromFile("C:\\Program Files (x86)\\Microchip\\PICkit 2\\PK2DeviceFile.dat");
if (!result) result = DevFile.LoadFromFile("C:\\Program Files (x86)\\Microchip\\PICkit 2 v2\\PK2DeviceFile.dat");
*/
if (!result)
{
if (openFileDialog1.ShowDialog() == System.Windows.Forms.DialogResult.OK)
{
result = DevFile.LoadFromFile(openFileDialog1.FileName);
}
}
if (result) DeviceFileLoaded();
}
private void DisplayRawScript(DeviceFile.DeviceScripts script)
{
int columnCount = 8;
int columnWidth = (dataGridHex.Width - 32) / columnCount;
int rowCount = script.ScriptLength / columnCount;
// Set up columns
dataGridHex.ColumnCount = columnCount;
for (int i = 0; i < 8; i++)
{
dataGridHex.Columns[i].Width = columnWidth;
}
// Set up rows
dataGridHex.Rows.Clear();
dataGridHex.RowCount = rowCount + 1;
// Load the script bytes
int col = 0;
int row = 0;
foreach (var v in script.Script)
{
dataGridHex[col, row].Value = string.Format("{0:X4}", v);
if (col++ == columnCount - 1)
{
col = 0;
row++;
}
}
}
private static void addTblScripts(DTBL tblScripts, DeviceFile.DeviceScripts[] fScripts)
{
System.Data.DataRow myNewRow;
for (int i = 0; i < fScripts.Length; i++)
{
myNewRow = tblScripts.NewRow();
myNewRow["ScriptNumber"] = fScripts[i].ScriptNumber; //UInt16();
myNewRow["ScriptName"] = fScripts[i].ScriptName; //String();
myNewRow["ScriptVersion"] = fScripts[i].ScriptVersion; //UInt16();
myNewRow["UNUSED1"] = fScripts[i].UNUSED1; //UInt32();
myNewRow["ScriptLength"] = fScripts[i].ScriptLength; //UInt16();
myNewRow["Script"] = fScripts[i].Script; //Unit16[];
myNewRow["Comment"] = fScripts[i].Comment; //String();
tblScripts.Rows.Add(myNewRow);
}
}
private static void addTblPartsList(DTBL tblPartsList, DeviceFile.DevicePartParams[] fPartsList)
{
System.Data.DataRow myNewRow;
for (int i = 0; i < fPartsList.Length; i++)
{
myNewRow = tblPartsList.NewRow();
myNewRow["PartName"] = fPartsList[i].PartName; //String();
myNewRow["Family"] = fPartsList[i].Family; //UInt16();
myNewRow["DeviceID"] = fPartsList[i].DeviceID; //UInt32();
myNewRow["ProgramMem"] = fPartsList[i].ProgramMem; //UInt32();
myNewRow["EEMem"] = fPartsList[i].EEMem; //UInt16();
myNewRow["EEAddr"] = fPartsList[i].EEAddr; //UInt32();
myNewRow["ConfigWords"] = fPartsList[i].ConfigWords; //Byte();
myNewRow["ConfigAddr"] = fPartsList[i].ConfigAddr; //UInt32();
myNewRow["UserIDWords"] = fPartsList[i].UserIDWords; //Byte();
myNewRow["UserIDAddr"] = fPartsList[i].UserIDAddr; //UInt32();
myNewRow["BandGapMask"] = fPartsList[i].BandGapMask; //UInt32();
// Init config arrays
myNewRow["ConfigMasks"] = fPartsList[i].ConfigMasks;
myNewRow["ConfigBlank"] = fPartsList[i].ConfigBlank;
myNewRow["CPMask"] = fPartsList[i].CPMask; //UInt16();
myNewRow["CPConfig"] = fPartsList[i].CPConfig; //Byte();
myNewRow["OSSCALSave"] = fPartsList[i].OSSCALSave; //Boolean();
myNewRow["IgnoreAddress"] = fPartsList[i].IgnoreAddress; //UInt32();
myNewRow["VddMin"] = fPartsList[i].VddMin; //Single();
myNewRow["VddMax"] = fPartsList[i].VddMax; //Single();
myNewRow["VddErase"] = fPartsList[i].VddErase; //Single();
myNewRow["CalibrationWords"] = fPartsList[i].CalibrationWords; //Byte();
myNewRow["ChipEraseScript"] = fPartsList[i].ChipEraseScript; //UInt16();
myNewRow["ProgMemAddrSetScript"] = fPartsList[i].ProgMemAddrSetScript; //UInt16();
myNewRow["ProgMemAddrBytes"] = fPartsList[i].ProgMemAddrBytes; //Byte();
myNewRow["ProgMemRdScript"] = fPartsList[i].ProgMemRdScript; //UInt16();
myNewRow["ProgMemRdWords"] = fPartsList[i].ProgMemRdWords; //UInt16();
myNewRow["EERdPrepScript"] = fPartsList[i].EERdPrepScript; //UInt16();
myNewRow["EERdScript"] = fPartsList[i].EERdScript; //UInt16();
myNewRow["EERdLocations"] = fPartsList[i].EERdLocations; //UInt16();
myNewRow["UserIDRdPrepScript"] = fPartsList[i].UserIDRdPrepScript; //UInt16();
myNewRow["UserIDRdScript"] = fPartsList[i].UserIDRdScript; //UInt16();
myNewRow["ConfigRdPrepScript"] = fPartsList[i].ConfigRdPrepScript; //UInt16();
myNewRow["ConfigRdScript"] = fPartsList[i].ConfigRdScript; //UInt16();
myNewRow["ProgMemWrPrepScript"] = fPartsList[i].ProgMemWrPrepScript; //UInt16();
myNewRow["ProgMemWrScript"] = fPartsList[i].ProgMemWrScript; //UInt16();
myNewRow["ProgMemWrWords"] = fPartsList[i].ProgMemWrWords; //UInt16();
myNewRow["ProgMemPanelBufs"] = fPartsList[i].ProgMemPanelBufs; //Byte();
myNewRow["ProgMemPanelOffset"] = fPartsList[i].ProgMemPanelOffset; //UInt32();
myNewRow["EEWrPrepScript"] = fPartsList[i].EEWrPrepScript; //UInt16();
myNewRow["EEWrScript"] = fPartsList[i].EEWrScript; //UInt16();
myNewRow["EEWrLocations"] = fPartsList[i].EEWrLocations; //UInt16();
myNewRow["UserIDWrPrepScript"] = fPartsList[i].UserIDWrPrepScript; //UInt16();
myNewRow["UserIDWrScript"] = fPartsList[i].UserIDWrScript; //UInt16();
myNewRow["ConfigWrPrepScript"] = fPartsList[i].ConfigWrPrepScript; //UInt16();
myNewRow["ConfigWrScript"] = fPartsList[i].ConfigWrScript; //UInt16();
myNewRow["OSCCALRdScript"] = fPartsList[i].OSCCALRdScript; //UInt16();
myNewRow["OSCCALWrScript"] = fPartsList[i].OSCCALWrScript; //UInt16();
myNewRow["DPMask"] = fPartsList[i].DPMask; //UInt16();
myNewRow["WriteCfgOnErase"] = fPartsList[i].WriteCfgOnErase; //Boolean();
myNewRow["BlankCheckSkipUsrIDs"] = fPartsList[i].BlankCheckSkipUsrIDs; //Boolean();
myNewRow["IgnoreBytes"] = fPartsList[i].IgnoreBytes; //UInt16();
myNewRow["ChipErasePrepScript"] = fPartsList[i].ChipErasePrepScript; //UInt16();
myNewRow["BootFlash"] = fPartsList[i].BootFlash; //UInt32();
myNewRow["Config9Mask"] = fPartsList[i].Config9Mask; //UInt16();
myNewRow["Config9Blank"] = fPartsList[i].Config9Blank; //UInt16();
myNewRow["ProgMemEraseScript"] = fPartsList[i].ProgMemEraseScript; //UInt16();
myNewRow["EEMemEraseScript"] = fPartsList[i].EEMemEraseScript; //UInt16();
myNewRow["ConfigMemEraseScript"] = fPartsList[i].ConfigMemEraseScript; //UInt16();
myNewRow["reserved1EraseScript"] = fPartsList[i].reserved1EraseScript; //UInt16();
myNewRow["reserved2EraseScript"] = fPartsList[i].reserved2EraseScript; //UInt16();
myNewRow["TestMemoryRdScript"] = fPartsList[i].TestMemoryRdScript; //UInt16();
myNewRow["TestMemoryRdWords"] = fPartsList[i].TestMemoryRdWords; //UInt16();
myNewRow["EERowEraseScript"] = fPartsList[i].EERowEraseScript; //UInt16();
myNewRow["EERowEraseWords"] = fPartsList[i].EERowEraseWords; //UInt16();
myNewRow["ExportToMPLAB"] = fPartsList[i].ExportToMPLAB; //Boolean();
myNewRow["DebugHaltScript"] = fPartsList[i].DebugHaltScript; //UInt16();
myNewRow["DebugRunScript"] = fPartsList[i].DebugRunScript; //UInt16();
myNewRow["DebugStatusScript"] = fPartsList[i].DebugStatusScript; //UInt16();
myNewRow["DebugReadExecVerScript"] = fPartsList[i].DebugReadExecVerScript; //UInt16();
myNewRow["DebugSingleStepScript"] = fPartsList[i].DebugSingleStepScript; //UInt16();
myNewRow["DebugBulkWrDataScript"] = fPartsList[i].DebugBulkWrDataScript; //UInt16();
myNewRow["DebugBulkRdDataScript"] = fPartsList[i].DebugBulkRdDataScript; //UInt16();
myNewRow["DebugWriteVectorScript"] = fPartsList[i].DebugWriteVectorScript; //UInt16();
myNewRow["DebugReadVectorScript"] = fPartsList[i].DebugReadVectorScript; //UInt16();
myNewRow["DebugRowEraseScript"] = fPartsList[i].DebugRowEraseScript; //UInt16();
myNewRow["DebugRowEraseSize"] = fPartsList[i].DebugRowEraseSize; //UInt16();
myNewRow["DebugReserved5Script"] = fPartsList[i].DebugReserved5Script; //UInt16();
myNewRow["DebugReserved6Script"] = fPartsList[i].DebugReserved6Script; //UInt16();
myNewRow["DebugReserved7Script"] = fPartsList[i].DebugReserved7Script; //UInt16();
myNewRow["DebugReserved8Script"] = fPartsList[i].DebugReserved8Script; //UInt16();
myNewRow["LVPScript"] = fPartsList[i].LVPScript; //UInt16();
tblPartsList.Rows.Add(myNewRow);
}
}
private static void addTblFamilies(DTBL tblFamilies, DeviceFile.DeviceFamilyParams[] fFamilies)
{
System.Data.DataRow myNewRow;
for (int i = 0; i < fFamilies.Length; i++)
{
myNewRow = tblFamilies.NewRow();
myNewRow["FamilyID"] = fFamilies[i].FamilyID; //UInt16();
myNewRow["FamilyType"] = fFamilies[i].FamilyType; //UInt16();
myNewRow["SearchPriority"] = fFamilies[i].SearchPriority; //UInt16();
myNewRow["FamilyName"] = fFamilies[i].FamilyName; //String();
myNewRow["ProgEntryScript"] = fFamilies[i].ProgEntryScript; //UInt16();
myNewRow["ProgExitScript"] = fFamilies[i].ProgExitScript; //UInt16();
myNewRow["ReadDevIDScript"] = fFamilies[i].ReadDevIDScript; //UInt16();
myNewRow["DeviceIDMask"] = fFamilies[i].DeviceIDMask; //UInt32();
myNewRow["BlankValue"] = fFamilies[i].BlankValue; //UInt32();
myNewRow["BytesPerLocation"] = fFamilies[i].BytesPerLocation; //Byte();
myNewRow["AddressIncrement"] = fFamilies[i].AddressIncrement; //Byte();
myNewRow["PartDetect"] = fFamilies[i].PartDetect; //Boolean();
myNewRow["ProgEntryVPPScript"] = fFamilies[i].ProgEntryVPPScript; //UInt16();
myNewRow["UNUSED1"] = fFamilies[i].UNUSED1; //UInt16();
myNewRow["EEMemBytesPerWord"] = fFamilies[i].EEMemBytesPerWord; //Byte();
myNewRow["EEMemAddressIncrement"] = fFamilies[i].EEMemAddressIncrement; //Byte();
myNewRow["UserIDHexBytes"] = fFamilies[i].UserIDHexBytes; //Byte();
myNewRow["UserIDBytes"] = fFamilies[i].UserIDBytes; //Byte();
myNewRow["ProgMemHexBytes"] = fFamilies[i].ProgMemHexBytes; //Byte();
myNewRow["EEMemHexBytes"] = fFamilies[i].EEMemHexBytes; //Byte();
myNewRow["ProgMemShift"] = fFamilies[i].ProgMemShift; //Byte();
myNewRow["TestMemoryStart"] = fFamilies[i].TestMemoryStart; //UInt32();
myNewRow["TestMemoryLength"] = fFamilies[i].TestMemoryLength; //UInt16();
myNewRow["Vpp"] = fFamilies[i].Vpp; //Single();
tblFamilies.Rows.Add(myNewRow);
}
}
private static void addTblInfo(DTBL tblInfo, DeviceFile.DeviceFileParams fInfo)
{
System.Data.DataRow myNewRow;
myNewRow = tblInfo.NewRow();
myNewRow["VersionMajor"] = fInfo.VersionMajor; //Int32();
myNewRow["VersionMinor"] = fInfo.VersionMinor; //Int32();
myNewRow["VersionDot"] = fInfo.VersionDot; //Int32();
myNewRow["VersionNotes"] = fInfo.VersionNotes; //String();
myNewRow["NumberFamilies"] = fInfo.NumberFamilies; //Int32();
myNewRow["NumberParts"] = fInfo.NumberParts; //Int32();
myNewRow["NumberScripts"] = fInfo.NumberScripts; //Int32();
myNewRow["Compatibility"] = fInfo.Compatibility; //Byte();
myNewRow["UNUSED1A"] = fInfo.UNUSED1A; //Byte();
myNewRow["UNUSED1B"] = fInfo.UNUSED1B; //UInt16();
myNewRow["UNUSED2"] = fInfo.UNUSED2; //UInt32();
tblInfo.Rows.Add(myNewRow);
}