/// <summary>
/// 離開[店號]時，帶出相關資料
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void txt_STORE_ID_Onblur()
{
try
{
#region 新增模式
BCO.CAACommon CAAComm = new BCO.CAACommon();
if (this.hid_PageStatus.Value == "insert")
{
#region 檢查傳入欄位[店號]的值
if (this.slp_STORE_ID.Text.Trim() == string.Empty)
{
Set_STORE_ID_Default();
#region Focus欄位
DropDownList drop_DISC_TYPE = (DropDownList)this.slp_DISC_TYPE.FindControl("D1");
string s_ScriptManager_Script = CAAComm.ToMakeUp_SetFocus_Script(drop_DISC_TYPE.ClientID, false);
ScriptManager.RegisterStartupScript(this.up_Condition, typeof(UpdatePanel), "CAA182", s_ScriptManager_Script, true);
#endregion
return;
}
#endregion
#region 傳入參數
//新增狀態下，必須使用sysdate，去查店號資料
//資料必須是當時有效的店號
ParameterList.Clear();
ParameterList.Add(CAAComm.GetValueSetParameter(this.slp_STORE_ID.Text, "string", false));//[店號]
ParameterList.Add(CAAComm.GetValueSetParameter(DateTime.Now.ToString(), "datetime", false));//時間
ParameterList.Add(CAAComm.GetValueSetParameter(Session["UID"].ToString(), "string", false));//V_LOG_UPDATEUID
#endregion
#region 連結資料庫
BCO.MaintainDiscRecord bco = new BCO.MaintainDiscRecord(ConntionDB);
IDataReader dr = bco.QUERY_CAA18_DATA_BY_STORE_ID(ParameterList);
#endregion
#region 將資料寫入相關欄位
//重新將店號再寫入一次
this.slp_STORE_ID.Text = this.slp_STORE_ID.Text;
if (dr.Read())
{
this.slp_GROUP_NO.Text = dr.IsDBNull(0) ? string.Empty : dr.GetString(0);//店群
this.slp_Z_O.Text = dr.IsDBNull(1) ? string.Empty : dr.GetString(1);//營業所
this.slp_SAL_ID.Text = dr.IsDBNull(2) ? string.Empty : dr.GetString(2);//營業人員
this.slp_AC_UID.Text = dr.IsDBNull(3) ? string.Empty : dr.GetString(3);//帳務人員
this.txt_PAY_RFNO.Text = dr.IsDBNull(4) ? string.Empty : dr.GetString(4);//結帳統編
this.txt_RFNO.Text = dr.IsDBNull(5) ? string.Empty : dr.GetString(5);//統一編號
this.txt_INV_ADDR.Text = dr.IsDBNull(6) ? string.Empty : dr.GetString(6);//地址
this.txt_TITLE.Text = dr.IsDBNull(7) ? string.Empty : dr.GetString(7);//發票抬頭
//Rika 20110413 修改 若統編開頭為A 則預設為2聯式折讓
if (this.txt_RFNO.Text.Substring(0, 1) == "A")
{
DropDownList drop_DISC_FORM = (DropDownList)this.slp_DISC_FORM.FindControl("D1");
drop_DISC_FORM.SelectedValue = "34";
}
else
{
DropDownList drop_DISC_FORM = (DropDownList)this.slp_DISC_FORM.FindControl("D1");
drop_DISC_FORM.SelectedValue = "33";
}
#region Focus欄位
DropDownList drop_DISC_TYPE = (DropDownList)this.slp_DISC_TYPE.FindControl("D1");
string s_ScriptManager_Script = CAAComm.ToMakeUp_SetFocus_Script(drop_DISC_TYPE.ClientID, false);
ScriptManager.RegisterStartupScript(this.up_Condition, typeof(UpdatePanel), "CAA182", s_ScriptManager_Script, true);
#endregion
}
#endregion
#region 檢查回傳資料
else
{
Set_STORE_ID_Default();
#region 若發生錯誤則alert訊息(秀玲要alert訊息)
string s_ScriptManager_Script = "alert('無符合店號或己關店，請重新輸入')";
ScriptManager.RegisterStartupScript(this.up_Condition, typeof(UpdatePanel), "CAA182", s_ScriptManager_Script, true);
#endregion
}
dr.Close();
#endregion
}
#endregion
#region 如果不符合以上條件，代表錯誤
else { throw new Exception("頁面資料錯誤，只有在[新增模式]下，才有欄位[店號]Onblur事件"); }
#endregion
}
catch (Exception ex)
{
WaringLogProcess(ex.Message);
this.ErrorMsgLabel.Text = ex.Message;
}
finally
{ Finally_Function(); }
}
/// <summary>
/// 檢查條件
/// </summary>
/// <param name="s_Type"></param>
/// <returns></returns>
private ArrayList Check_Condition(string s_Type)
{
#region 宣告
BCO.CAACommon CAAComm = new BCO.CAACommon();
ArrayList arl_Return = new ArrayList();
arl_Return.Add(string.Empty);//該欄位放Focus欄位之ClientID
arl_Return.Add(string.Empty);//該欄位放錯誤訊息
#endregion
#region SLP轉型
#region 銷或折讓維護區
TextBox txt_STORE_ID = (TextBox)this.slp_STORE_ID.FindControl("TextBoxCode");//店號
TextBox txt_ROOT_NO = (TextBox)this.slp_ROOT_NO.FindControl("TextBoxCode");//商品群分類
TextBox txt_DISC_DATE = (TextBox)this.slp_DISC_DATE.FindControl("TextBoxCode");//折讓日期
TextBox txt_CHG_DISC_DATE = (TextBox)this.slp_CHG_DISC_DATE.FindControl("TextBoxCode");//異動折讓日期
TextBox txt_PROOF_DATE = (TextBox)this.slp_PROOF_DATE.FindControl("TextBoxCode");//憑證已回日期
TextBox txt_CANCEL_DATE = (TextBox)this.slp_CANCEL_DATE.FindControl("TextBoxCode");//作廢日期
TextBox txt_PERIOD_DATE = (TextBox)this.slp_PERIOD_DATE.FindControl("TextBoxCode");//申報日期
TextBox txt_TEMPORAL_DATE = (TextBox)this.slp_TEMPORAL_DATE.FindControl("TextBoxCode");//暫收日期
TextBox txt_DISC_UAMT = (TextBox)this.slp_DISC_UAMT.FindControl("TextBoxCode");//折讓金額(未稅)
TextBox txt_DISC_TAX = (TextBox)this.slp_DISC_TAX.FindControl("TextBoxCode");//折讓稅額
TextBox txt_DISC_AMT = (TextBox)this.slp_DISC_AMT.FindControl("TextBoxCode");//總金額
TextBox txt_CLOSE_MONTH = (TextBox)((ASP.wui_slp_slp_numberupdown_ascx)this.slp_CLOSE_MONTH.FindControl("SLP_NumberUpDown1")).FindControl("TextBoxCode");//結帳年月
DropDownList drop_DISC_SOURCE = (DropDownList)this.slp_DISC_SOURCE.FindControl("D1");//來源
DropDownList drop_DISC_TYPE = (DropDownList)this.slp_DISC_TYPE.FindControl("D1");//型式
DropDownList drop_TAX_TYPE = (DropDownList)this.slp_TAX_TYPE.FindControl("D1");//稅別
#endregion
#region 折讓項目區
TextBox txt_Disc_INV_DATE = (TextBox)this.slp_Disc_INV_DATE.FindControl("TextBoxCode");//發票日期
TextBox txt_Disc_DISC_UAMT = (TextBox)this.slp_Disc_DISC_UAMT.FindControl("TextBoxCode");//折讓金額(未稅)
TextBox txt_Disc_DISC_TAX = (TextBox)this.slp_Disc_DISC_TAX.FindControl("TextBoxCode");//折讓稅額
TextBox txt_Disc_NON_INV_UAMT = (TextBox)this.slp_Disc_NON_INV_UAMT.FindControl("TextBoxCode");//發票餘額(未稅)
TextBox txt_Disc_NON_INV_TAX = (TextBox)this.slp_Disc_NON_INV_TAX.FindControl("TextBoxCode");//發票稅額
#endregion
#endregion
#region BUTTON [儲存]鈕
#region 新增狀態
if (s_Type == "BUTTON [儲存]鈕，新增狀態")
{
#region 檢查欄位的Byte長度
if (CAAComm.Get_Byte_Length(this.txt_ACT_DISC_NO.Text) > 13)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[財會折讓單號]長度不可大於 13 Byte", "1", this.txt_ACT_DISC_NO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_REPROOF_NO.Text) > 12)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[發票號碼/收據]長度不可大於 12 Byte", "1", this.txt_REPROOF_NO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_RFNO.Text) > 10)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[統一編號]長度不可大於 10 Byte", "1", this.txt_RFNO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_MEMO.Text) > 200)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[備註]長度不可大於 200 Byte", "1", this.txt_MEMO.ClientID); }
#endregion
#region 檢查SLP日期格式
arl_Return = CAAComm.Check_Format_Date(this.slp_DISC_DATE.Text, "欄位[折讓日期]日期格式錯誤", "1", txt_DISC_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_CHG_DISC_DATE.Text, "欄位[異動折讓日期]日期格式錯誤", "1", txt_DISC_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_PROOF_DATE.Text, "欄位[憑證已回日期]日期格式錯誤", "1", txt_PROOF_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_CANCEL_DATE.Text, "欄位[作廢日期]日期格式錯誤", "1", txt_CANCEL_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_PERIOD_DATE.Text, "欄位[申報日期]日期格式錯誤", "1", txt_PERIOD_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_TEMPORAL_DATE.Text, "欄位[暫收日期]日期格式錯誤", "1", txt_TEMPORAL_DATE.ClientID, arl_Return);
#endregion
#region 檢查SLP數字格式
arl_Return = CAAComm.Check_Format_Int(this.slp_DISC_UAMT.Text, "欄位[折讓金額(未稅)]數字格式錯誤", "32", "1", txt_DISC_UAMT.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(this.slp_DISC_TAX.Text, "欄位[折讓稅額]數字格式錯誤", "32", "1", txt_DISC_TAX.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(Request[txt_DISC_AMT.UniqueID].ToString(), "欄位[總金額]數字格式錯誤", "32", "1", txt_DISC_AMT.ClientID, arl_Return);
#endregion
#region 檢查SLP年月格式
arl_Return = CAAComm.Check_Format_YearMonth(this.slp_CLOSE_MONTH.Text, "欄位[結帳年月]年月格式錯誤", "1", txt_CLOSE_MONTH.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_YearMonth(this.slp_CLOSE_MONTH_ACCT.Text, "欄位[結帳年月-財會]年月格式錯誤", "1", this.slp_CLOSE_MONTH_ACCT.TextBoxCode_Object.ClientID, arl_Return);
#endregion
#region 檢查必填欄位
arl_Return = CAAComm.Check_MustFillin_Column(drop_DISC_SOURCE.SelectedIndex.ToString(), "drop", "欄位[來源]為必填欄位", "1", string.Empty, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_STORE_ID.Text, "text", "欄位[店號]為必填欄位", "1", txt_STORE_ID.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(drop_DISC_TYPE.SelectedIndex.ToString(), "drop", "欄位[型式]為必填欄位", "1", string.Empty, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(drop_TAX_TYPE.SelectedIndex.ToString(), "drop", "欄位[稅別]為必填欄位", "1", string.Empty, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_ROOT_NO.Text, "text", "欄位[商品群分類]為必填欄位", "1", txt_ROOT_NO.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_CLOSE_MONTH.Text, "text", "欄位[結帳年月]為必填欄位", "1", txt_CLOSE_MONTH.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_DISC_UAMT.Text, "text", "欄位[折讓金額(未稅)]為必填欄位", "1", txt_DISC_UAMT.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_DISC_TAX.Text, "text", "欄位[折讓稅額]為必填欄位", "1", txt_DISC_TAX.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(Request[txt_DISC_AMT.UniqueID].ToString(), "text", "欄位[總金額]為必填欄位", "1", txt_DISC_AMT.ClientID, arl_Return);
#endregion
#region 如果基本檢查有誤，則Return
if (arl_Return[1].ToString() != string.Empty)
{ return arl_Return; }
#endregion
#region 自訂檢查
#region 檢查欄位[折讓金額(未稅)][折讓稅額][總金額]
int i_DISC_UAMT = int.Parse(this.slp_DISC_UAMT.Text);//折讓金額(未稅)
int i_DISC_TAX = int.Parse(this.slp_DISC_TAX.Text);//折讓稅額
int i_DISC_AMT = int.Parse(Request[txt_DISC_AMT.UniqueID].ToString());//總金額
if (i_DISC_UAMT < 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]不可小於0", "1", txt_DISC_UAMT.ClientID); }
if (i_DISC_TAX < 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓稅額]不可小於0", "1", txt_DISC_TAX.ClientID); }
if (i_DISC_AMT <= 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[總金額]不可小於或等於0", "1", txt_DISC_AMT.ClientID); }
if (i_DISC_UAMT == 0 && i_DISC_TAX != 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]為0時，欄位[折讓稅額]也必須為0", "1", txt_DISC_TAX.ClientID); }
if (i_DISC_UAMT + i_DISC_TAX != i_DISC_AMT)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]加上欄位[折讓稅額]必須等於欄位[總金額]", "1", txt_DISC_AMT.ClientID); }
if (this.slp_TAX_TYPE.Text == "1" ||//[稅別]=免稅
this.slp_TAX_TYPE.Text == "2")//[稅別]=零稅
{
if (i_DISC_TAX != 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[稅別]是免稅或零稅時，欄位[折讓稅額]必須為0", "1", txt_DISC_TAX.ClientID); }
}
#endregion
#region 新增模式下欄位[來源]必須是選擇人工開立
if (this.slp_DISC_SOURCE.Text != "2")//2代表是人工開立
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[來源]必須是選擇人工開立", "1", drop_DISC_SOURCE.ClientID); }
#endregion
#region 檢查欄位[店號]是否為有效店號
#region 傳入參數
ParameterList.Clear();
ParameterList.Add(CAAComm.GetValueSetParameter(this.slp_STORE_ID.Text, "string", false));//店號
ParameterList.Add(CAAComm.GetValueSetParameter(DateTime.Now.ToString(), "datetime", false));//系統時間
ParameterList.Add(CAAComm.GetValueSetParameter(Session["UID"].ToString(), "string", false));//登入人員
#endregion
#region 連結資料庫
BCO.MaintainDiscRecord bco = new BCO.MaintainDiscRecord(ConntionDB);
IDataReader dr = bco.QUERY_CAA18_DATA_BY_STORE_ID(ParameterList);
#endregion
if (dr.Read() == false)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[店號]查無符合店號或己關店，請重新輸入", "1", this.slp_STORE_ID.TextBox_Code.ClientID); }
dr.Close();
#endregion
#region 新增模式下欄位[作廢]不能勾選
if (this.chb_CANCEL_FLG.Checked == true)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[作廢]不能勾選", "1", chb_CANCEL_FLG.ClientID); }
#endregion
#region 新增模式下欄位[作廢日期]必須為空白
if (this.slp_CANCEL_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[作廢日期]必須為空白", "1", txt_CANCEL_DATE.ClientID); }
#endregion
#region 新增模式下欄位[申報]不能勾選
if (this.chb_PERIOD_FLG.Checked == true)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[申報]不能勾選", "1", chb_PERIOD_FLG.ClientID); }
#endregion
#region 新增模式下欄位[申報日期]必須為空白
if (this.slp_PERIOD_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[申報日期]必須為空白", "1", txt_PERIOD_DATE.ClientID); }
#endregion
#region 新增模式下欄位[轉暫收]不能勾選
if (this.chb_TEMPORAL_FLG.Checked == true)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[轉暫收]不能勾選", "1", chb_TEMPORAL_FLG.ClientID); }
#endregion
#region 新增模式下欄位[暫收日期]必須為空白
if (this.slp_TEMPORAL_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[暫收日期]必須為空白", "1", txt_TEMPORAL_DATE.ClientID); }
#endregion
#region 檢查若己月結則不允許新增
#region 傳入參數
ParameterList.Clear();
ParameterList.Add(CAAComm.GetValueSetParameter(this.slp_CLOSE_MONTH.Text, "string", false));//[結帳年月]
ParameterList.Add(CAAComm.GetValueSetParameter("CAA18", "string", false)); //V_FUNC_NO
#endregion
#region 連結資料庫
BCO.ChanMonthCloseYN bco_Is_Close = new BCO.ChanMonthCloseYN(ConntionDB);
#endregion
#region 檢查回傳資料
//回傳結果=Y，該月份已月結
//回傳結果=N，該月份尚未月結
if (((ArrayList)bco_Is_Close.GetChanMonthCloseStatus(ParameterList, null))[0].ToString() == "Y")
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[結帳年月]該月份已月結", "1", txt_CLOSE_MONTH.ClientID); }
#endregion
#endregion
#region 檢查欄位[憑證已回]若已勾選，則欄位[憑證已回日期]為必填欄位
if (this.chb_PROOF_FLG.Checked == true && this.slp_PROOF_DATE.Text.Trim() == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[憑證已回]若有勾選，則欄位[憑證已回日期]為必填欄位", "1", txt_PROOF_DATE.ClientID); }
#endregion
#region 檢查欄位[憑證已回日期]若有值，則欄位[憑證已回]或[取具進項憑証]或[取具收據]必須勾選
if ((this.chb_PROOF_FLG.Checked == false && this.chb_REPROOF_FLG.Checked == false && this.chb_RECEIPT_FLG.Checked == false) == true &&
this.slp_PROOF_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[憑證已回日期]若有值，則欄位[憑證已回]或[取具進項憑証]或[取具收據]必須勾選", "1", string.Empty); }
#endregion
#region 檢查欄位[取具進項憑証]若已勾選，則欄位[憑證已回日期]為必填欄位
if (this.chb_REPROOF_FLG.Checked == true && this.slp_PROOF_DATE.Text == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[取具進項憑証]若已勾選，則欄位[憑證已回日期]為必填欄位", "1", txt_PROOF_DATE.ClientID); }
#endregion
#region 檢查欄位[取具進項憑証]若已勾選，則欄位[發票號碼/收據]為必填欄位
if (this.chb_REPROOF_FLG.Checked == true && this.txt_REPROOF_NO.Text == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[取具進項憑証]若已勾選，則欄位[發票號碼/收據]為必填欄位", "1", this.txt_REPROOF_NO.ClientID); }
#endregion
#region 檢查欄位[發票號碼/收據]若有值，則欄位[取具進項憑証]必須勾選
if (this.chb_REPROOF_FLG.Checked == false && this.txt_REPROOF_NO.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[發票號碼/收據]若有值，則欄位[取具進項憑証]必須勾選", "1", string.Empty); }
#endregion
#region 檢查欄位[取具收據]若已勾選，則欄位[憑證已回日期]為必填欄位
if (this.chb_RECEIPT_FLG.Checked == true && this.slp_PROOF_DATE.Text == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[取具收據]若已勾選，則欄位[憑證已回日期]為必填欄位", "1", txt_PROOF_DATE.ClientID); }
#endregion
#endregion
}
#endregion
#region 編輯狀態
else if (s_Type == "BUTTON [儲存]鈕，編輯狀態")
{
#region 檢查欄位的Byte長度
if (CAAComm.Get_Byte_Length(this.txt_ACT_DISC_NO.Text) > 13)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[財會折讓單號]長度不可大於 13 Byte", "1", this.txt_ACT_DISC_NO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_REPROOF_NO.Text) > 12)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[發票號碼/收據]長度不可大於 12 Byte", "1", this.txt_REPROOF_NO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_RFNO.Text) > 10)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[統一編號]長度不可大於 10 Byte", "1", this.txt_RFNO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_MEMO.Text) > 200)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[備註]長度不可大於 200 Byte", "1", this.txt_MEMO.ClientID); }
#endregion
#region 檢查SLP日期格式
arl_Return = CAAComm.Check_Format_Date(this.slp_DISC_DATE.Text, "欄位[折讓日期]日期格式錯誤", "1", txt_DISC_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_CHG_DISC_DATE.Text, "欄位[異動折讓日期]日期格式錯誤", "1", txt_DISC_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_PROOF_DATE.Text, "欄位[憑證已回日期]日期格式錯誤", "1", txt_PROOF_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_CANCEL_DATE.Text, "欄位[作廢日期]日期格式錯誤", "1", txt_CANCEL_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_PERIOD_DATE.Text, "欄位[申報日期]日期格式錯誤", "1", txt_PERIOD_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_TEMPORAL_DATE.Text, "欄位[暫收日期]日期格式錯誤", "1", txt_TEMPORAL_DATE.ClientID, arl_Return);
#endregion
#region 檢查SLP數字格式
arl_Return = CAAComm.Check_Format_Int(this.slp_DISC_UAMT.Text, "欄位[折讓金額(未稅)]數字格式錯誤", "32", "1", txt_DISC_UAMT.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(this.slp_DISC_TAX.Text, "欄位[折讓稅額]數字格式錯誤", "32", "1", txt_DISC_TAX.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(Request[txt_DISC_AMT.UniqueID].ToString(), "欄位[總金額]數字格式錯誤", "32", "1", txt_DISC_AMT.ClientID, arl_Return);
#endregion
#region 檢查SLP年月格式
arl_Return = CAAComm.Check_Format_YearMonth(this.slp_CLOSE_MONTH.Text, "欄位[結帳年月]年月格式錯誤", "1", txt_CLOSE_MONTH.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_YearMonth(this.slp_CLOSE_MONTH_ACCT.Text, "欄位[結帳年月-財會]年月格式錯誤", "1", this.slp_CLOSE_MONTH_ACCT.TextBoxCode_Object.ClientID, arl_Return);
#endregion
#region 檢查不可同時進行多個勾選作業
bool b_IsRight = false;
string s_ReturnMsg = string.Empty;
Check_CheckStatus(out b_IsRight, out s_ReturnMsg);
if (b_IsRight == true)//代表進行1個以上勾選作業
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "不可同時進行多個勾選作業", "1", string.Empty); }
#endregion
#region 檢查月結是否與頁面LOAD進來時相同，如有異動，請使用者重新LOAD頁面
#region 傳入參數
ParameterList.Clear();
ParameterList.Add(CAAComm.GetValueSetParameter(this.slp_CLOSE_MONTH.Text, "string", false));//[結帳年月]
ParameterList.Add(CAAComm.GetValueSetParameter("CAA18", "string", false)); //V_FUNC_NO
#endregion
#region 連結資料庫
BCO.ChanMonthCloseYN bco_Is_Close = new BCO.ChanMonthCloseYN(ConntionDB);
#endregion
#region 檢查回傳資料
//回傳結果=Y，該月份已月結
//回傳結果=N，該月份尚未月結
bool b_IsClose_Now = false;
if (((ArrayList)bco_Is_Close.GetChanMonthCloseStatus(ParameterList, null))[0].ToString() == "Y")
{ b_IsClose_Now = true; }
else
{ b_IsClose_Now = false; }
if (b_IsClose != b_IsClose_Now)//代表月結已被更動
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "月結已被更動，請重新載入編輯頁面", "1", string.Empty); }
#endregion
#endregion
#region 如果基本檢查有誤，則Return
if (arl_Return[1].ToString() != string.Empty)
{ return arl_Return; }
#endregion
#region 自訂檢查
#region 檢查欄位[折讓金額(未稅)][折讓稅額][總金額]
int i_DISC_UAMT = int.Parse(this.slp_DISC_UAMT.Text);//折讓金額(未稅)
int i_DISC_TAX = int.Parse(this.slp_DISC_TAX.Text);//折讓稅額
int i_DISC_AMT = int.Parse(Request[txt_DISC_AMT.UniqueID].ToString());//總金額
if (i_DISC_UAMT < 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]不可小於0", "1", txt_DISC_UAMT.ClientID); }
if (i_DISC_TAX < 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓稅額]不可小於0", "1", txt_DISC_TAX.ClientID); }
if (i_DISC_AMT <= 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[總金額]不可小於或等於0", "1", txt_DISC_AMT.ClientID); }
if (i_DISC_UAMT == 0 && i_DISC_TAX != 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]為0時，欄位[折讓稅額]也必須為0", "1", txt_DISC_TAX.ClientID); }
if (i_DISC_UAMT + i_DISC_TAX != i_DISC_AMT)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]加上欄位[折讓稅額]必須等於欄位[總金額]", "1", txt_DISC_AMT.ClientID); }
if (this.slp_TAX_TYPE.Text == "1" ||//[稅別]=免稅
this.slp_TAX_TYPE.Text == "2")//[稅別]=零稅
{
if (i_DISC_TAX != 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[稅別]是免稅或零稅時，欄位[折讓稅額]必須為0", "1", txt_DISC_TAX.ClientID); }
}
#endregion
#region 檢查如果己月結則[折讓金額(未稅)][折讓稅額][總金額]要與原始金額相同
if (b_IsClose == true)//該月份已月結
{
if (this.hid_Original_DISC_UAMT.Value.Trim() != this.slp_DISC_UAMT.Text.Trim())
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[結帳年月]" + this.slp_CLOSE_MONTH.Text + "該月份己月結，欄位[折讓金額(未稅)]的金額必須等於原始折讓金額(未稅)" + this.hid_Original_DISC_UAMT.Value.Trim() + "元", "1", txt_DISC_UAMT.ClientID); }
if (this.hid_Original_DISC_TAX.Value.Trim() != this.slp_DISC_TAX.Text.Trim())
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[結帳年月]" + this.slp_CLOSE_MONTH.Text + "該月份己月結，欄位[折讓稅額]的金額必須等於原始折讓稅額" + this.hid_Original_DISC_TAX.Value.Trim() + "元", "1", txt_DISC_TAX.ClientID); }
if (this.hid_Original_DISC_AMT.Value.Trim() != Request[txt_DISC_AMT.UniqueID].ToString().Trim())
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[結帳年月]" + this.slp_CLOSE_MONTH.Text + "該月份己月結，欄位[總金額]的金額必須等於原始折讓稅額" + this.hid_Original_DISC_AMT.Value.Trim() + "元", "1", txt_DISC_AMT.ClientID); }
}
#endregion
#region 檢查下列情況如果已月結則修改後的金額必須等於原始金額
if (b_IsClose == true)//該月份已月結
{
if (s_ReturnMsg == "勾選欄位[憑證已回]" ||
s_ReturnMsg == "取消勾選欄位[憑證已回]" ||
s_ReturnMsg == "取消勾選欄位[取具進項憑証]" ||
s_ReturnMsg == "都沒有勾")
{
int i_IsClose_DISC_UAMT = 0;
int i_IsClose_DISC_TAX = 0;
int i_IsClose_DISC_AMT = 0;
foreach (DataRow drRow in dt_NewItem.Rows)
{
i_IsClose_DISC_UAMT += int.Parse(drRow["DISC_UAMT"].ToString());//折讓金額(未稅)
i_IsClose_DISC_TAX += int.Parse(drRow["DISC_TAX"].ToString());//折讓稅額
i_IsClose_DISC_AMT += int.Parse(drRow["DISC_AMT"].ToString());//總金額
}
if (this.hid_Original_DISC_UAMT.Value.Trim() != i_IsClose_DISC_UAMT.ToString())
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[結帳年月]" + this.slp_CLOSE_MONTH.Text + "已月結，折讓項目的折讓金額(未稅)：" + i_IsClose_DISC_UAMT.ToString() + "元，不等於原始折讓金額(未稅)：" + this.hid_Original_DISC_UAMT.Value + "元", "1", string.Empty); }
if (this.hid_Original_DISC_TAX.Value.Trim() != i_IsClose_DISC_TAX.ToString())
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[結帳年月]" + this.slp_CLOSE_MONTH.Text + "已月結，折讓項目的折讓稅額：" + i_IsClose_DISC_TAX.ToString() + "元，不等於原始折讓稅額：" + this.hid_Original_DISC_TAX.Value + "元", "1", string.Empty); }
if (this.hid_Original_DISC_AMT.Value.Trim() != i_IsClose_DISC_AMT.ToString())
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[結帳年月]" + this.slp_CLOSE_MONTH.Text + "已月結，折讓項目的總金額：" + i_IsClose_DISC_AMT.ToString() + "元，不等於原始總金額：" + this.hid_Original_DISC_AMT.Value + "元", "1", string.Empty); }
}
}
#endregion
#region 檢查欄位[憑證已回]若已勾選，則欄位[憑證已回日期]為必填欄位
if (this.chb_PROOF_FLG.Checked == true && this.slp_PROOF_DATE.Text.Trim() == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[憑證已回]若有勾選，則欄位[憑證已回日期]為必填欄位", "1", txt_PROOF_DATE.ClientID); }
#endregion
#region 檢查欄位[憑證已回日期]若有值，則欄位[憑證已回]或[取具進項憑証]或[取具收據]必須勾選
if ((this.chb_PROOF_FLG.Checked == false && this.chb_REPROOF_FLG.Checked == false && this.chb_RECEIPT_FLG.Checked == false) == true &&
this.slp_PROOF_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[憑證已回日期]若有值，則欄位[憑證已回]或[取具進項憑証]或[取具收據]必須勾選", "1", string.Empty); }
#endregion
#region 檢查欄位[取具進項憑証]若已勾選，則欄位[憑證已回日期]為必填欄位
if (this.chb_REPROOF_FLG.Checked == true && this.slp_PROOF_DATE.Text == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[取具進項憑証]若已勾選，則欄位[憑證已回日期]為必填欄位", "1", txt_PROOF_DATE.ClientID); }
#endregion
#region 檢查欄位[取具進項憑証]若已勾選，則欄位[發票號碼/收據]為必填欄位
if (this.chb_REPROOF_FLG.Checked == true && this.txt_REPROOF_NO.Text == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[取具進項憑証]若已勾選，則欄位[發票號碼/收據]為必填欄位", "1", this.txt_REPROOF_NO.ClientID); }
#endregion
#region 檢查欄位[發票號碼/收據]若有值，則欄位[取具進項憑証]必須勾選
if (this.chb_REPROOF_FLG.Checked == false && this.txt_REPROOF_NO.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[發票號碼/收據]若有值，則欄位[取具進項憑証]必須勾選", "1", string.Empty); }
#endregion
#region 檢查欄位[取具收據]若已勾選，則欄位[憑證已回日期]為必填欄位
if (this.chb_RECEIPT_FLG.Checked == true && this.slp_PROOF_DATE.Text == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[取具收據]若已勾選，則欄位[憑證已回日期]為必填欄位", "1", txt_PROOF_DATE.ClientID); }
#endregion
#region 檢查欄位[作廢]若已勾選，則欄位[作廢日期]為必填欄位
if (this.chb_CANCEL_FLG.Checked == true && this.slp_CANCEL_DATE.Text.Trim() == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[作廢]若有勾選，則欄位[作廢日期]為必填欄位", "1", txt_CANCEL_DATE.ClientID); }
#endregion
#region 檢查[總金額][沖帳餘額]，若有沖帳過，則不允許作廢
#region 規則
/* 20100325秀玲新增此判斷需求
* 如果該張折讓單的[DISC_REMAIN_AMT](沖帳金額) & [DISC_AMT](總金額)金額不相符
* 代表該張折讓單已經沖帳過，不允許作廢。*/
#endregion
if (this.chb_CANCEL_FLG.Checked == true || this.slp_CANCEL_DATE.Text.Trim() != string.Empty)
{
if (dt_Main.Rows[0]["DISC_REMAIN_AMT"].ToString() != dt_Main.Rows[0]["DISC_AMT"].ToString())
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "折讓單已沖帳，不允許作廢", "1", string.Empty); }
}
#endregion
#region 檢查欄位[作廢日期]若有值，則欄位[作廢]必須勾選
if (this.chb_CANCEL_FLG.Checked == false && this.slp_CANCEL_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[作廢日期]若有值，則欄位[作廢]必須勾選", "1", string.Empty); }
#endregion
#region 檢查欄位[轉暫收]若已勾選，則欄位[暫收日期]為必填欄位
if (this.chb_TEMPORAL_FLG.Checked == true && this.slp_TEMPORAL_DATE.Text.Trim() == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[轉暫收]若有勾選，則欄位[暫收日期]為必填欄位", "1", txt_TEMPORAL_DATE.ClientID); }
#endregion
#region 檢查欄位[暫收日期]若有值，則欄位[轉暫收]必須勾選
if (this.chb_TEMPORAL_FLG.Checked == false && this.slp_TEMPORAL_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[暫收日期]若有值，則欄位[轉暫收]必須勾選", "1", string.Empty); }
#endregion
#region 檢查欄位[憑證已回][取具進項憑証][取具收據]三個欄位只能擇一勾選
int i_Check_Count = 0;
i_Check_Count += this.chb_PROOF_FLG.Checked == true ? 1 : 0;//憑證已回
i_Check_Count += this.chb_REPROOF_FLG.Checked == true ? 1 : 0;//取具進項憑証
i_Check_Count += this.chb_RECEIPT_FLG.Checked == true ? 1 : 0;//取具收據
if (i_Check_Count > 1)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[憑證已回][取具進項憑証][取具收據]三個欄位只能擇一勾選", "1", string.Empty); }
#endregion
#region 檢查欄位[取具收據]如果有勾選，則欄位[折讓稅額]必須為0
if (this.chb_RECEIPT_FLG.Checked == true &&
this.slp_DISC_TAX.Text != "0")
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[取具收據]如果有勾選，則欄位[折讓稅額]必須為0", "1", this.slp_DISC_TAX.TextBox_Code.ClientID); }
#endregion
#endregion
}
#endregion
#endregion
#region BUTTON [折讓開立]鈕
else if (s_Type == "BUTTON [折讓開立]鈕")
{
#region 檢查欄位的Byte長度
if (CAAComm.Get_Byte_Length(this.txt_ACT_DISC_NO.Text) > 13)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[財會折讓單號]長度不可大於 13 Byte", "1", this.txt_ACT_DISC_NO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_REPROOF_NO.Text) > 12)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[發票號碼/收據]長度不可大於 12 Byte", "1", this.txt_REPROOF_NO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_RFNO.Text) > 10)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[統一編號]長度不可大於 10 Byte", "1", this.txt_RFNO.ClientID); }
if (CAAComm.Get_Byte_Length(this.txt_MEMO.Text) > 200)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[備註]長度不可大於 200 Byte", "1", this.txt_MEMO.ClientID); }
#endregion
#region 檢查SLP日期格式
arl_Return = CAAComm.Check_Format_Date(this.slp_DISC_DATE.Text, "欄位[折讓日期]日期格式錯誤", "1", txt_DISC_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_CHG_DISC_DATE.Text, "欄位[異動折讓日期]日期格式錯誤", "1", txt_DISC_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_PROOF_DATE.Text, "欄位[憑證已回日期]日期格式錯誤", "1", txt_PROOF_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_CANCEL_DATE.Text, "欄位[作廢日期]日期格式錯誤", "1", txt_CANCEL_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_PERIOD_DATE.Text, "欄位[申報日期]日期格式錯誤", "1", txt_PERIOD_DATE.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Date(this.slp_TEMPORAL_DATE.Text, "欄位[暫收日期]日期格式錯誤", "1", txt_TEMPORAL_DATE.ClientID, arl_Return);
#endregion
#region 檢查SLP數字格式
arl_Return = CAAComm.Check_Format_Int(this.slp_DISC_UAMT.Text, "欄位[折讓金額(未稅)]數字格式錯誤", "32", "1", txt_DISC_UAMT.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(this.slp_DISC_TAX.Text, "欄位[折讓稅額]數字格式錯誤", "32", "1", txt_DISC_TAX.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(Request[txt_DISC_AMT.UniqueID].ToString(), "欄位[總金額]數字格式錯誤", "32", "1", txt_DISC_AMT.ClientID, arl_Return);
#endregion
#region 檢查SLP年月格式
arl_Return = CAAComm.Check_Format_YearMonth(this.slp_CLOSE_MONTH.Text, "欄位[結帳年月]年月格式錯誤", "1", txt_CLOSE_MONTH.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_YearMonth(this.slp_CLOSE_MONTH_ACCT.Text, "欄位[結帳年月-財會]年月格式錯誤", "1", this.slp_CLOSE_MONTH_ACCT.TextBoxCode_Object.ClientID, arl_Return);
#endregion
#region 檢查必填欄位
arl_Return = CAAComm.Check_MustFillin_Column(drop_DISC_SOURCE.SelectedIndex.ToString(), "drop", "欄位[來源]為必填欄位", "1", string.Empty, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_STORE_ID.Text, "text", "欄位[店號]為必填欄位", "1", txt_STORE_ID.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(drop_DISC_TYPE.SelectedIndex.ToString(), "drop", "欄位[型式]為必填欄位", "1", string.Empty, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(drop_TAX_TYPE.SelectedIndex.ToString(), "drop", "欄位[稅別]為必填欄位", "1", string.Empty, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_ROOT_NO.Text, "text", "欄位[商品群分類]為必填欄位", "1", txt_ROOT_NO.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_CLOSE_MONTH.Text, "text", "欄位[結帳年月]為必填欄位", "1", txt_CLOSE_MONTH.ClientID, arl_Return);
#endregion
#region 如果基本檢查有誤，則Return
if (arl_Return[1].ToString() != string.Empty)
{ return arl_Return; }
#endregion
#region 自訂檢查
#region 新增模式下欄位[來源]必須是選擇人工開立
if (this.slp_DISC_SOURCE.Text != "2")//2代表是人工開立
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[來源]必須是選擇人工開立", "1", drop_DISC_SOURCE.ClientID); }
#endregion
#region 新增模式下欄位[作廢]不能勾選
if (this.chb_CANCEL_FLG.Checked == true)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[作廢]不能勾選", "1", chb_CANCEL_FLG.ClientID); }
#endregion
#region 新增模式下欄位[作廢日期]必須為空白
if (this.slp_CANCEL_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[作廢日期]必須為空白", "1", txt_CANCEL_DATE.ClientID); }
#endregion
#region 新增模式下欄位[申報]不能勾選
if (this.chb_PERIOD_FLG.Checked == true)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[申報]不能勾選", "1", chb_PERIOD_FLG.ClientID); }
#endregion
#region 新增模式下欄位[申報日期]必須為空白
if (this.slp_PERIOD_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[申報日期]必須為空白", "1", txt_PERIOD_DATE.ClientID); }
#endregion
#region 新增模式下欄位[轉暫收]不能勾選
if (this.chb_TEMPORAL_FLG.Checked == true)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[轉暫收]不能勾選", "1", chb_TEMPORAL_FLG.ClientID); }
#endregion
#region 新增模式下欄位[暫收日期]必須為空白
if (this.slp_TEMPORAL_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "新增模式下欄位[暫收日期]必須為空白", "1", txt_TEMPORAL_DATE.ClientID); }
#endregion
#region 檢查若己月結則不允許新增
#region 傳入參數
ParameterList.Clear();
ParameterList.Add(CAAComm.GetValueSetParameter(this.slp_CLOSE_MONTH.Text, "string", false));//[結帳年月]
ParameterList.Add(CAAComm.GetValueSetParameter("CAA18", "string", false)); //V_FUNC_NO
#endregion
#region 連結資料庫
BCO.ChanMonthCloseYN bco_Is_Close = new BCO.ChanMonthCloseYN(ConntionDB);
#endregion
#region 檢查回傳資料
//回傳結果=Y，該月份已月結
//回傳結果=N，該月份尚未月結
if (((ArrayList)bco_Is_Close.GetChanMonthCloseStatus(ParameterList, null))[0].ToString() == "Y")
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[結帳年月]該月份已月結", "1", txt_CLOSE_MONTH.ClientID); }
#endregion
#endregion
#region 檢查欄位[憑證已回]若已勾選，則欄位[憑證已回日期]為必填欄位
if (this.chb_PROOF_FLG.Checked == true && this.slp_PROOF_DATE.Text.Trim() == string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[憑證已回]若有勾選，則欄位[憑證已回日期]為必填欄位", "1", txt_PROOF_DATE.ClientID); }
#endregion
#region 檢查欄位[憑證已回日期]若有值，則欄位[憑證已回]或[取具進項憑証]必須勾選
if ((this.chb_PROOF_FLG.Checked == false && this.chb_REPROOF_FLG.Checked == false) == true
&& this.slp_PROOF_DATE.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[憑證已回日期]若有值，則欄位[憑證已回]或[取具進項憑証]必須勾選", "1", string.Empty); }
#endregion
#region 檢查欄位[取具進項憑証]若已勾選，則不允許按[折讓開立]鈕
if (this.chb_REPROOF_FLG.Checked == true)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[取具進項憑証]若已勾選，則不允許按[折讓開立]鈕", "1", string.Empty); }
#endregion
#region 檢查欄位[發票號碼/收據]若有值，則欄位[取具進項憑証]必須勾選
if (this.chb_REPROOF_FLG.Checked == false && this.txt_REPROOF_NO.Text.Trim() != string.Empty)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[發票號碼/收據]若有值，則欄位[取具進項憑証]必須勾選", "1", string.Empty); }
#endregion
#endregion
}
#endregion
#region 折讓項目 BUTTON [確認]鈕
else if (s_Type == "折讓項目 BUTTON [確認]鈕")
{
#region 檢查SLP日期格式
arl_Return = CAAComm.Check_Format_Date(this.slp_Disc_INV_DATE.Text, "欄位[發票日期]日期格式錯誤", "1", txt_Disc_INV_DATE.ClientID, arl_Return);
#endregion
#region 檢查SLP數字格式
arl_Return = CAAComm.Check_Format_Int(this.slp_Disc_DISC_UAMT.Text, "欄位[折讓金額(未稅)]數字格式錯誤", "32", "1", txt_Disc_DISC_UAMT.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(Request[txt_Disc_DISC_TAX.UniqueID].ToString(), "欄位[折讓稅額]數字格式錯誤", "32", "1", txt_Disc_DISC_TAX.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(this.slp_Disc_NON_INV_UAMT.Text, "欄位[發票餘額(未稅)]數字格式錯誤", "32", "1", txt_Disc_NON_INV_UAMT.ClientID, arl_Return);
arl_Return = CAAComm.Check_Format_Int(this.slp_Disc_NON_INV_TAX.Text, "欄位[發票稅額]數字格式錯誤", "32", "1", txt_Disc_NON_INV_TAX.ClientID, arl_Return);
#endregion
#region 檢查必填欄位
arl_Return = CAAComm.Check_MustFillin_Column(this.txt_Disc_INV_NO.Text, "text", "欄位[發票號碼]為必填欄位", "1", this.txt_Disc_INV_NO.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_Disc_DISC_UAMT.Text, "text", "欄位[折讓金額(未稅)]為必填欄位", "1", txt_Disc_DISC_UAMT.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(Request[txt_Disc_DISC_TAX.UniqueID].ToString(), "text", "欄位[折讓稅額]為必填欄位", "1", txt_Disc_DISC_TAX.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_Disc_NON_INV_UAMT.Text, "text", "欄位[發票餘額(未稅)]為必填欄位", "1", txt_Disc_NON_INV_UAMT.ClientID, arl_Return);
arl_Return = CAAComm.Check_MustFillin_Column(this.slp_Disc_NON_INV_TAX.Text, "text", "欄位[發票稅額]為必填欄位", "1", txt_Disc_NON_INV_TAX.ClientID, arl_Return);
#endregion
#region 如果基本檢查有誤，則Return
if (arl_Return[1].ToString() != string.Empty)
{ return arl_Return; }
#endregion
#region 自訂檢查
int i_Disc_DISC_UAMT = int.Parse(this.slp_Disc_DISC_UAMT.Text);//折讓金額(未稅)
int i_Disc_DISC_TAX = int.Parse(Request[txt_Disc_DISC_TAX.UniqueID].ToString());//折讓稅額
int i_Total_NON_INV_UAMT = int.Parse(this.hid_Disc_Total_NON_INV_UAMT.Value);//發票餘額(未稅)+折讓金額(未稅)
int i_Total_NON_INV_TAX = int.Parse(this.hid_Disc_Total_NON_INV_TAX.Value);//發票稅額+折讓稅額
if (i_Disc_DISC_UAMT < 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]不可小於0", "1", txt_Disc_DISC_UAMT.ClientID); }
if (i_Disc_DISC_TAX < 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓稅額]不可小於0", "1", txt_Disc_DISC_TAX.ClientID); }
if (i_Disc_DISC_UAMT == 0 && i_Disc_DISC_TAX != 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]為0時，欄位[折讓稅額]也必須為0", "1", txt_Disc_DISC_TAX.ClientID); }
if (i_Disc_DISC_UAMT > i_Total_NON_INV_UAMT)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓金額(未稅)]不得大於[發票餘額(未稅)]", "1", txt_Disc_DISC_UAMT.ClientID); }
if (i_Disc_DISC_TAX > i_Total_NON_INV_TAX)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[折讓稅額]不得大於[發票稅額]", "1", txt_Disc_DISC_TAX.ClientID); }
if (this.slp_TAX_TYPE.Text == "1" ||//[稅別]=免稅
this.slp_TAX_TYPE.Text == "2")//[稅別]=零稅
{
if (i_Disc_DISC_TAX != 0)
{ arl_Return = CAAComm.ToMakeUp_Err_ArrayList(arl_Return, "欄位[稅別]是免稅或零稅時，欄位[折讓稅額]必須為0", "1", txt_Disc_DISC_TAX.ClientID); }
}
#endregion
}
#endregion
return arl_Return;
}
