public void Execute(IPCBIWindow parent)
{
//set options here:
bool onlySelectedComponent = true;
bool CalculateTopSide = true;
bool CalculateBotSide = true;
double TopArea = 0;
double BotArea = 0;
IStep step = parent.GetCurrentStep();
if (step == null)
{
return; //no project loaded
}
List <ICMPObject> allCMPs = step.GetAllCMPObjects();
foreach (ICMPObject cmp in allCMPs)
{
if (onlySelectedComponent && !cmp.IsSelected)
{
continue;
}
PCBI.MathUtils.IPolyClass polygonOfCMP = cmp.GetPolygonOutline();
foreach (PCBI.MathUtils.IEdge edge in polygonOfCMP.GetEdges())
{
if (!CalculateTopSide && cmp.PlacedTop)
{
continue;
}
if (!CalculateBotSide && !cmp.PlacedTop)
{
continue;
}
//work with integrals to calculate the area
double extent = 0;
if (edge.Type == IEdgeType.Line)
{
extent = PCBI.MathUtils.IMath.DistancePointToPoint(edge.Begin, edge.End);
}
else
{
// Pi * R * winkel /180
double angle = PCBI.MathUtils.IMath.GetAngle(edge.Begin, edge.End, ((PCBI.MathUtils.IArcEdge)edge).Center, ((PCBI.MathUtils.IArcEdge)edge).ClockWise);
double radius = PCBI.MathUtils.IMath.DistancePointToPoint(edge.Begin, ((PCBI.MathUtils.IArcEdge)edge).Center);
extent = Math.PI * radius * angle / 180;
}
if (cmp.PlacedTop)
{
TopArea += extent * cmp.CompHEIGHT;
}
else
{
BotArea += extent * cmp.CompHEIGHT;
}
}
}
double areaPCB = step.CalculateBoardArea();
if (parent.GetUnit()) //change mils? to cm?
{
areaPCB = areaPCB / 155000.31; //(1/2.54*2.54)
TopArea = TopArea / 155000.31;
BotArea = BotArea / 155000.31;
}
System.Windows.Forms.MessageBox.Show((onlySelectedComponent ? "Selected Component side walls:" : "All side walls of Components:") + Environment.NewLine +
(CalculateTopSide ? "Top Side Components: " + TopArea + Environment.NewLine : "") +
(CalculateBotSide ? "Bot Side Components: " + BotArea + Environment.NewLine : "") +
((!CalculateBotSide && !CalculateTopSide) ? "No Elements allowed, please run check with other parameters!" : "") + Environment.NewLine +
"Board Area " + areaPCB + (parent.GetUnit() ? " cm?":" mils?")
, "Result", System.Windows.Forms.MessageBoxButtons.OK, System.Windows.Forms.MessageBoxIcon.Information);
}
public void Execute(IPCBIWindow parent)
{
if (parent.GetCurrentStep() == null)
{
return;
}
bool clearLayer = false;
IStep step = parent.GetCurrentStep();
IFilter filter = new IFilter(parent);
if (parent.GetCurrentStep() == null)
{
return;
}
IODBLayer layerTopPins = null;
IODBLayer layerbotPins = null;
if (layerTopPins == null)
{
layerTopPins = filter.CreateEmptyODBLayer("component_top_shapes", step.Name);
if (clearLayer)
{
foreach (IODBObject o in layerTopPins.GetAllLayerObjects())
{
layerTopPins.RemoveObject(o);
}
}
}
if (layerbotPins == null)
{
layerbotPins = filter.CreateEmptyODBLayer("component_bot_shapes", step.Name);
if (clearLayer)
{
foreach (IODBObject o in layerbotPins.GetAllLayerObjects())
{
layerbotPins.RemoveObject(o);
}
}
}
foreach (ICMPObject cmp in step.GetAllCMPObjects())
{
PCBI.MathUtils.IPolyClass CMP_Poly = cmp.GetPolygonOutline(false);
IODBObject outlinePolygon;
if (cmp.PlacedTop)
{
outlinePolygon = filter.CreatePolygon(layerTopPins);
}
else
{
outlinePolygon = filter.CreatePolygon(layerbotPins);
}
ISurfaceSpecifics CMP_Body_Polygon = (ISurfaceSpecifics)outlinePolygon.GetSpecifics();
bool polyStart = true;
foreach (IEdge edge in CMP_Poly.GetEdges())
{
if (polyStart)
{
polyStart = false;
CMP_Body_Polygon.StartPolygon(false, new PointF((float)edge.Begin.X, (float)edge.Begin.Y));
}
else
if (edge is IArcEdge)
{
IArcEdge aEdge = (IArcEdge)edge;
PointF start = new PointF((float)aEdge.Begin.X, (float)aEdge.Begin.Y);
PointF end = new PointF((float)aEdge.End.X, (float)aEdge.End.Y);
PointF center = new PointF((float)aEdge.Center.X, (float)aEdge.Center.Y);
CMP_Body_Polygon.AddArc(start, end, center, aEdge.ClockWise);
}
else if (edge is ILineEdge)
{
ILineEdge aEdge = (ILineEdge)edge;
PointF start = new PointF((float)aEdge.Begin.X, (float)aEdge.Begin.Y);
PointF end = new PointF((float)aEdge.End.X, (float)aEdge.End.Y);
CMP_Body_Polygon.AddLine(start, end);
}
}
CMP_Body_Polygon.EndPolygon(); //close the new contour
outlinePolygon.SetSpecifics(CMP_Body_Polygon);
}
layerbotPins.EnableLayer(true);
layerTopPins.EnableLayer(true);
parent.UpdateView();
parent.UpdateControlsAndResetView();
}
public void Execute(IPCBIWindow parent)
{
double sizeRouting = PCBI.MathUtils.IMath.MM2Mils(2); //2 mm
double sizeCutout = PCBI.MathUtils.IMath.MM2Mils(2); //2 mm
double spaceCutout = PCBI.MathUtils.IMath.MM2Mils(100); //100 mm
double lengthCutout = PCBI.MathUtils.IMath.MM2Mils(5); //5 mm
double sumUpLength = 0; //offset for start
IStep step = parent.GetCurrentStep();
if (step == null)
{
return;
}
PCBI.MathUtils.IPolyClass polyOfOutline = step.GetPCBOutlinePoly();
if (polyOfOutline.GetEdgeCount() == 0)
{
return;
}
IFilter filter = new IFilter(parent);
IODBLayer HelperLayer = filter.CreateEmptyODBLayer("rout_outline_helper", step.Name); //this helper layer contains the uncutted line elements
IODBLayer outlineLayerRouting = filter.CreateEmptyODBLayer("rout_outline", step.Name);
IODBLayer cutoutLayerRouting = filter.CreateEmptyODBLayer("rout_cutout", step.Name);
#region clean layers for multi use
List <IODBObject> objListToRemove = new List <IODBObject>();
foreach (IODBObject obj in HelperLayer.GetAllLayerObjects())
{
objListToRemove.Add(obj);
}
HelperLayer.RemoveObjects(objListToRemove);
objListToRemove = new List <IODBObject>();
foreach (IODBObject obj in cutoutLayerRouting.GetAllLayerObjects())
{
objListToRemove.Add(obj);
}
cutoutLayerRouting.RemoveObjects(objListToRemove);
objListToRemove = new List <IODBObject>();
foreach (IODBObject obj in outlineLayerRouting.GetAllLayerObjects())
{
objListToRemove.Add(obj);
}
outlineLayerRouting.RemoveObjects(objListToRemove);
#endregion
int shapeIndexOutlinediameter = IFilter.AddToolDefinitionRound(HelperLayer, (float)sizeRouting);
foreach (PCBI.MathUtils.IEdge edge in polyOfOutline.GetEdges())
{
#region outline elements
if (edge.Type == IEdgeType.Arc)
{
IODBObject newArc = filter.CreateArc(HelperLayer);
IArcSpecificsD arc = (IArcSpecificsD)newArc.GetSpecificsD();
arc.ClockWise = ((IArcEdge)edge).ClockWise;
if (arc.ClockWise)
{
arc.Start = edge.Begin;
arc.End = edge.End;
}
else
{
arc.End = edge.Begin;
arc.Start = edge.End;
}
arc.Center = ((PCBI.MathUtils.IArcEdge)edge).Center;
arc.ShapeIndex = shapeIndexOutlinediameter;
newArc.SetSpecifics(arc);
}
else
{
IODBObject newLine = filter.CreateLine(HelperLayer);
ILineSpecificsD line = (ILineSpecificsD)newLine.GetSpecificsD();
line.Start = edge.Begin;
line.End = edge.End;
line.ShapeIndex = shapeIndexOutlinediameter;
newLine.SetSpecifics(line);
}
#endregion
}
//make one surface of all lines and arcs
HelperLayer.CreateLayerNetList(true);
HelperLayer.PolygonizeLayer(0, false);
PointD lastPToIdentifyHole = PointD.InfPoint;
foreach (IODBObject surface in HelperLayer.GetAllLayerObjects())
{
#region replace surfaces by routing lines and arcs
if (surface.Type != IObjectType.Surface)
{
continue;
}
objListToRemove.Add(surface);
List <ISurfaceSpecificsD> isle = ((ISurfaceSpecificsD)surface.GetSpecificsD()).SplitInIsleAndHoles(parent);
if (isle.Count > 0)
{
for (int i = 0; i < isle.Count; i++)
{
bool foundelement = false;
foreach (IODBObject linesAndArcs in isle[i].GetOutline())
{
if (linesAndArcs.Type == IObjectType.Arc)
{
#region arc
IODBObject newArc = filter.CreateArc(HelperLayer);
IArcSpecificsD arc = (IArcSpecificsD)linesAndArcs.GetSpecificsD();
if (lastPToIdentifyHole == PointD.InfPoint || !(lastPToIdentifyHole != arc.Start && lastPToIdentifyHole != arc.End))
{
lastPToIdentifyHole = arc.End;
}
else
{
break;
}
newArc.SetSpecifics(arc);
#endregion
}
else
{
#region line
IODBObject newLine = filter.CreateLine(HelperLayer);
ILineSpecificsD line = (ILineSpecificsD)linesAndArcs.GetSpecificsD();
if (lastPToIdentifyHole == PointD.InfPoint || line.Start == lastPToIdentifyHole)
{
lastPToIdentifyHole = line.End;
}
else
{
break;
}
newLine.SetSpecifics(line);
#endregion
}
foundelement = true;
}
if (foundelement)
{
break;
}
}
}
#endregion
}
HelperLayer.RemoveObjects(objListToRemove); //surface remove
int shapeIndexCutoutdiameter = IFilter.AddToolDefinitionRound(outlineLayerRouting, (float)sizeCutout);
int shapeIndexCutoutdiameter2 = IFilter.AddToolDefinitionRound(cutoutLayerRouting, (float)sizeCutout);
double sumUpGap = 0;
foreach (IODBObject lineOrArc in HelperLayer.GetAllLayerObjects())
{
if (lineOrArc.Type == IObjectType.Line)
{
#region lines
ILineSpecificsD line = (ILineSpecificsD)lineOrArc.GetSpecificsD();
double length = IMath.DistancePointToPoint(line.Start, line.End);
double lengthComplete = length;
while (true)
{
if (length <= lengthCutout)
{
#region short lines
sumUpLength += lengthCutout;
if (sumUpLength > spaceCutout)
{
sumUpGap += lengthCutout;
IODBObject lineObj = filter.CreateLine(cutoutLayerRouting);
ILineSpecificsD lineSub = (ILineSpecificsD)lineOrArc.GetSpecificsD();
lineSub.ShapeIndex = shapeIndexCutoutdiameter2;
lineSub.Start = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
length = 0;
lineSub.End = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
lineObj.SetSpecifics(lineSub);
if (sumUpGap > lengthCutout)
{
sumUpGap = 0;
sumUpLength = 0;
}
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, lineObj);
}
else
{
IODBObject lineObj = filter.CreateLine(outlineLayerRouting);
ILineSpecificsD lineSub = (ILineSpecificsD)lineOrArc.GetSpecificsD();
lineSub.ShapeIndex = shapeIndexCutoutdiameter;
lineSub.Start = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
length = 0;
lineSub.End = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
lineObj.SetSpecifics(lineSub);
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, lineObj);
}
break;
#endregion
}
else
{
#region long lines
sumUpLength += lengthCutout;
if (sumUpLength > spaceCutout || sumUpGap > 0)
{
sumUpGap += lengthCutout;
IODBObject lineObj = filter.CreateLine(cutoutLayerRouting);
ILineSpecificsD lineSub = (ILineSpecificsD)lineOrArc.GetSpecificsD();
lineSub.ShapeIndex = shapeIndexCutoutdiameter2;
lineSub.Start = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
length -= lengthCutout;
lineSub.End = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
lineObj.SetSpecifics(lineSub);
if (sumUpGap > lengthCutout)
{
sumUpGap = 0;
sumUpLength = 0;
}
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, lineObj);
}
else
{
IODBObject lineObj = filter.CreateLine(outlineLayerRouting);
ILineSpecificsD lineSub = (ILineSpecificsD)lineOrArc.GetSpecificsD();
lineSub.ShapeIndex = shapeIndexCutoutdiameter;
lineSub.Start = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
length -= lengthCutout;
lineSub.End = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
lineObj.SetSpecifics(lineSub);
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, lineObj);
}
#endregion
}
}
#endregion
}
else if (lineOrArc.Type == IObjectType.Arc)
{
#region arcs
IArcSpecificsD arc = (IArcSpecificsD)lineOrArc.GetSpecificsD();
double arcLength = IMath.DistancePointToPoint(arc.Start, arc.End);
sumUpLength += arcLength;
if (sumUpLength > spaceCutout || sumUpGap > 0)
{
sumUpGap += arcLength;
IODBObject arcObj = filter.CreateArc(cutoutLayerRouting);
arc.ShapeIndex = shapeIndexCutoutdiameter2;
arcObj.SetSpecifics(arc);
if (sumUpGap > lengthCutout)
{
sumUpGap = 0;
sumUpLength = 0;
}
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, arcObj);
}
else
{
IODBObject arcObj = filter.CreateArc(outlineLayerRouting);
arc.ShapeIndex = shapeIndexCutoutdiameter;
arcObj.SetSpecifics(arc);
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, arcObj);
}
#endregion
}
}
//additional attributes are .feed, .speed, .rout_flag, .comp. and .rout_chain
IMatrix matrix = parent.GetMatrix();
if (matrix != null)
{
matrix.UpdateDataAndList();
}
parent.UpdateView();
}
