/// <summary>
/// download from file
/// загрузить из файла
/// </summary>
public void Load()
{
if (!File.Exists(@"Engine\" + Name + @"Alert.txt"))
{
return;
}
try
{
using (StreamReader reader = new StreamReader(@"Engine\" + Name + @"Alert.txt"))
{
Enum.TryParse(reader.ReadLine(), true, out Type);
string [] savesLine = reader.ReadLine().Split('%');
Lines = new ChartAlertLine[savesLine.Length - 1];
for (int i = 0; i < savesLine.Length - 1; i++)
{
Lines[i] = new ChartAlertLine();
Lines[i].SetFromSaveString(savesLine[i]);
}
Label = reader.ReadLine();
Message = reader.ReadLine();
BorderWidth = Convert.ToInt32(reader.ReadLine());
IsOn = Convert.ToBoolean(reader.ReadLine());
IsMusicOn = Convert.ToBoolean(reader.ReadLine());
IsMessageOn = Convert.ToBoolean(reader.ReadLine());
ColorLine = Color.FromArgb(Convert.ToInt32(reader.ReadLine()));
ColorLabel = Color.FromArgb(Convert.ToInt32(reader.ReadLine()));
Enum.TryParse(reader.ReadLine(), out Music);
Enum.TryParse(reader.ReadLine(), true, out SignalType);
VolumeReaction = reader.ReadLine().ToDecimal();
Slippage = Convert.ToDecimal(reader.ReadLine());
NumberClosePosition = Convert.ToInt32(reader.ReadLine());
Enum.TryParse(reader.ReadLine(), true, out OrderPriceType);
reader.Close();
}
}
catch (Exception)
{
// ignore
}
}
/// <summary>
/// Создать линию из точек
/// </summary>
/// <param name="valueOne">значение первой точки</param>
/// <param name="valueTwo">значение второй точки</param>
/// <param name="numberOne">номер первой точки</param>
/// <param name="numberTwo">номер второй точки</param>
/// <param name="candles">свечи</param>
/// <returns>алерт</returns>
private ChartAlertLine AlertLineCreate(decimal valueOne, decimal valueTwo, int numberOne, int numberTwo, List <Candle> candles)
{
// 2 рассчитываем движение индикатора за свечу на данном ТФ
decimal stepCorner; // сколько наша линия проходит за свечку
stepCorner = (valueTwo - valueOne) / (numberTwo - numberOne + 1);
// 3 теперь строим массив значений линии параллельный свечному массиву
decimal[] lineDecimals = new decimal[candles.Count];
decimal point = valueOne;
lineDecimals[numberOne] = point;
for (int i = numberOne + 1; i < lineDecimals.Length; i++)
{ // бежим вперёд по массиву
lineDecimals[i] = point;
point += stepCorner;
}
point = valueOne;
for (int i = numberOne - 1; i > -1; i--)
{ // бежим назад по массиву
lineDecimals[i] = point;
point -= stepCorner;
}
// 4 находим ближайший от начала час и следующий за ним
int firstHourCandle = -1;
int secondHourCandle = -1;
int nowHour = candles[candles.Count - 1].TimeStart.Hour;
for (int i = candles.Count - 1; i > -1; i--)
{
if (nowHour != candles[i].TimeStart.Hour)
{
nowHour = candles[i].TimeStart.Hour;
if (firstHourCandle == -1)
{
firstHourCandle = i + 1;
}
else
{
secondHourCandle = i + 1;
break;
}
}
}
// 6 рассчитываем реальное положение алерта. В часах.
if (secondHourCandle < 0 ||
firstHourCandle < 0)
{
return(null);
}
DateTime startTime = candles[secondHourCandle].TimeStart;
DateTime endTime = candles[firstHourCandle].TimeStart;
decimal startPoint = lineDecimals[secondHourCandle];
decimal endPoint = lineDecimals[firstHourCandle];
// 5 далее рассчитываем значение линии на первом и втором часе
ChartAlertLine line = new ChartAlertLine();
line.TimeFirstPoint = startTime;
line.ValueFirstPoint = startPoint;
line.TimeSecondPoint = endTime;
line.ValueSecondPoint = endPoint;
return(line);
}
/// <summary>
/// взять Линии для Алерта типа Chanal
/// </summary>
/// <param name="candles">свечи</param>
/// <returns>линии</returns>
private ChartAlertLine[] GetChanalLines(List <Candle> candles)
{
if (Slider.Value == 100)
{
decimal valueOne = _candleOneValue;
decimal valueTwo = _candleTwoValue;
int numberOne = _candleOneNumber;
int numberTwo = _candleTwoNumber;
ChartAlertLine[] lines = { AlertLineCreate(valueOne, valueTwo, numberOne, numberTwo, candles) };
return(lines);
}
// 1 берём точки
decimal onePoint = _candleOneValue;
int oneNumber = _candleOneNumber; // первая точка линии
decimal twoPoint = _candleTwoValue;
int twoPNumber = _candleTwoNumber; // вторая точка линии
decimal l023value1;
decimal l023value2;
decimal l038value1;
decimal l038value2;
decimal l050value1;
decimal l050value2;
decimal l061value1;
decimal l061value2;
decimal l076value1;
decimal l076value2;
decimal l0100value1;
decimal l0100value2;
decimal l0161value1;
decimal l0161value2;
decimal l0261value1;
decimal l0261value2;
decimal l0423value1;
decimal l0423value2;
decimal sliderValue = Convert.ToDecimal(Slider.Value);
decimal devider;
if (Slider.Value > 100)
{
devider = (sliderValue - 100) / 1000; // 100 / 1000 = 0,1
l023value1 = onePoint + devider * onePoint * 0.23m;
l023value2 = twoPoint + devider * twoPoint * 0.23m;
l038value1 = onePoint + devider * onePoint * 0.38m;
l038value2 = twoPoint + devider * twoPoint * 0.38m;
l050value1 = onePoint + devider * onePoint * 0.50m;
l050value2 = twoPoint + devider * twoPoint * 0.50m;
l061value1 = onePoint + devider * onePoint * 0.61m;
l061value2 = twoPoint + devider * twoPoint * 0.61m;
l076value1 = onePoint + devider * onePoint * 0.76m;
l076value2 = twoPoint + devider * twoPoint * 0.76m;
l0100value1 = onePoint + devider * onePoint * 1m;
l0100value2 = twoPoint + devider * twoPoint * 1m;
l0161value1 = onePoint + devider * onePoint * 1.61m;
l0161value2 = twoPoint + devider * twoPoint * 1.61m;
l0261value1 = onePoint + devider * onePoint * 2.61m;
l0261value2 = twoPoint + devider * twoPoint * 2.61m;
l0423value1 = onePoint + devider * onePoint * 4.23m;
l0423value2 = twoPoint + devider * twoPoint * 4.423m;
}
else
{
devider = (100 - sliderValue) / 1000; // 100 / 1000 = 0,1
l023value1 = onePoint - devider * onePoint * 0.23m;
l023value2 = twoPoint - devider * twoPoint * 0.23m;
l038value1 = onePoint - devider * onePoint * 0.38m;
l038value2 = twoPoint - devider * twoPoint * 0.38m;
l050value1 = onePoint - devider * onePoint * 0.50m;
l050value2 = twoPoint - devider * twoPoint * 0.50m;
l061value1 = onePoint - devider * onePoint * 0.61m;
l061value2 = twoPoint - devider * twoPoint * 0.61m;
l076value1 = onePoint - devider * onePoint * 0.76m;
l076value2 = twoPoint - devider * twoPoint * 0.76m;
l0100value1 = onePoint - devider * onePoint * 1m;
l0100value2 = twoPoint - devider * twoPoint * 1m;
l0161value1 = onePoint - devider * onePoint * 1.61m;
l0161value2 = twoPoint - devider * twoPoint * 1.61m;
l0261value1 = onePoint - devider * onePoint * 2.61m;
l0261value2 = twoPoint - devider * twoPoint * 2.61m;
l0423value1 = onePoint - devider * onePoint * 4.23m;
l0423value2 = twoPoint - devider * twoPoint * 4.23m;
}
// 2 расс
ChartAlertLine oneLine = AlertLineCreate(onePoint, twoPoint, oneNumber, twoPNumber, candles);
ChartAlertLine l023Line = AlertLineCreate(l023value1, l023value2, oneNumber, twoPNumber, candles);
ChartAlertLine l038Line = AlertLineCreate(l038value1, l038value2, oneNumber, twoPNumber, candles);
ChartAlertLine l050Line = AlertLineCreate(l050value1, l050value2, oneNumber, twoPNumber, candles);
ChartAlertLine l061Line = AlertLineCreate(l061value1, l061value2, oneNumber, twoPNumber, candles);
ChartAlertLine l076Line = AlertLineCreate(l076value1, l076value2, oneNumber, twoPNumber, candles);
ChartAlertLine l100Line = AlertLineCreate(l0100value1, l0100value2, oneNumber, twoPNumber, candles);
ChartAlertLine l161Line = AlertLineCreate(l0161value1, l0161value2, oneNumber, twoPNumber, candles);
ChartAlertLine l261Line = AlertLineCreate(l0261value1, l0261value2, oneNumber, twoPNumber, candles);
ChartAlertLine l423Line = AlertLineCreate(l0423value1, l0423value2, oneNumber, twoPNumber, candles);
ChartAlertLine[] alertLines = new ChartAlertLine[10];
alertLines[0] = oneLine;
alertLines[1] = l023Line;
alertLines[2] = l038Line;
alertLines[3] = l050Line;
alertLines[4] = l061Line;
alertLines[5] = l076Line;
alertLines[6] = l100Line;
alertLines[7] = l161Line;
alertLines[8] = l261Line;
alertLines[9] = l423Line;
return(alertLines);
}
/// <summary>
/// взять Линии для Алерта типа SpeedLine
/// </summary>
/// <param name="candles">свечки</param>
/// <returns>линии</returns>
private ChartAlertLine[] GetSpeedAlertLines(List <Candle> candles)
{
//1) Указываем первую точку
//2) Указываем вторую точку
//3) Между точками строиться прямоугольник
//4) По вертикальному катету накладываем три точки. При этом на восходящем движении отсчет идет снизу вверх: пропорция 0.382______ 0.487_______ 0.618. Проводим через них три линии.
decimal valueOneClick = _candleOneValue;
decimal valueTwoClick;
decimal devider = Convert.ToDecimal(Slider.Value - 100);
valueTwoClick = _candleTwoValue + _candleTwoValue * Convert.ToDecimal(devider / 1000);
// 1 если нажаты точки на одной прямой
if (valueTwoClick == valueOneClick)
{
decimal valueOne = _candleOneValue;
decimal valueTwo = _candleTwoValue;
int numberOne = _candleOneNumber;
int numberTwo = _candleTwoNumber;
ChartAlertLine[] lines = { AlertLineCreate(valueOne, valueTwo, numberOne, numberTwo, candles) };
return(lines);
}
// 2 находим высоту катета
decimal highKatet;
bool isUpSpeedLine;
if (valueTwoClick > valueOneClick)
{
isUpSpeedLine = true;
highKatet = valueTwoClick - valueOneClick;
}
else
{
isUpSpeedLine = false;
highKatet = valueOneClick - valueTwoClick;
}
// объявляем точки для трёх линий
decimal firstValueToAllLine = _candleOneValue;
int firstNumberToAllLine = _candleOneNumber;
int secondNumberToAllLine = _candleTwoNumber;
decimal oneLineValue;
decimal twoLineValue;
decimal threeLineValue;
if (isUpSpeedLine)
{
oneLineValue = valueOneClick + highKatet * 0.382m;
twoLineValue = valueOneClick + highKatet * 0.487m;
threeLineValue = valueOneClick + highKatet * 0.618m;
}
else
{
oneLineValue = valueOneClick - highKatet * 0.382m;
twoLineValue = valueOneClick - highKatet * 0.487m;
threeLineValue = valueOneClick - highKatet * 0.618m;
}
ChartAlertLine oneLine = AlertLineCreate(firstValueToAllLine, oneLineValue, firstNumberToAllLine,
secondNumberToAllLine, candles);
ChartAlertLine twoLine = AlertLineCreate(firstValueToAllLine, twoLineValue, firstNumberToAllLine,
secondNumberToAllLine, candles);
ChartAlertLine treeLine = AlertLineCreate(firstValueToAllLine, threeLineValue, firstNumberToAllLine,
secondNumberToAllLine, candles);
ChartAlertLine[] alertLines = { oneLine, twoLine, treeLine };
return(alertLines);
}
/// <summary>
/// Create line of points
/// Создать линию из точек
/// </summary>
/// <param name="valueOne">first point value/значение первой точки</param>
/// <param name="valueTwo">second point value/значение второй точки</param>
/// <param name="numberOne">first point number/номер первой точки</param>
/// <param name="numberTwo">second point number/номер второй точки</param>
/// <param name="candles">candles/свечи</param>
/// <returns>alerts/алерт</returns>
private ChartAlertLine AlertLineCreate(decimal valueOne, decimal valueTwo, int numberOne, int numberTwo, List <Candle> candles)
{
// 2 calculate indicator movement per candlestick on this TF
// 2 рассчитываем движение индикатора за свечу на данном ТФ
decimal stepCorner; // how long our line goes by candle //сколько наша линия проходит за свечку
stepCorner = (valueTwo - valueOne) / (numberTwo - numberOne + 1);
// 3 now build an array of line values parallel to candlestick array
// 3 теперь строим массив значений линии параллельный свечному массиву
decimal[] lineDecimals = new decimal[candles.Count];
decimal point = valueOne;
lineDecimals[numberOne] = point;
for (int i = numberOne + 1; i < lineDecimals.Length; i++)
{
// running ahead of array.
// бежим вперёд по массиву
lineDecimals[i] = point;
point += stepCorner;
}
point = valueOne;
for (int i = numberOne - 1; i > -1; i--)
{
// running backwards through array.
// бежим назад по массиву
lineDecimals[i] = point;
point -= stepCorner;
}
// 4 find nearest one from the beginning of hour and the next one after it.
// 4 находим ближайший от начала час и следующий за ним
int firstHourCandle = -1;
int secondHourCandle = -1;
int nowHour = candles[candles.Count - 1].TimeStart.Hour;
for (int i = candles.Count - 1; i > -1; i--)
{
if (nowHour != candles[i].TimeStart.Hour)
{
nowHour = candles[i].TimeStart.Hour;
if (firstHourCandle == -1)
{
firstHourCandle = i + 1;
}
else
{
secondHourCandle = i + 1;
break;
}
}
}
// 6 calculate real position of alert. In hours.
// 6 рассчитываем реальное положение алерта. В часах.
if (secondHourCandle < 0 ||
firstHourCandle < 0)
{
return(null);
}
DateTime startTime = candles[secondHourCandle].TimeStart;
DateTime endTime = candles[firstHourCandle].TimeStart;
decimal startPoint = lineDecimals[secondHourCandle];
decimal endPoint = lineDecimals[firstHourCandle];
// 5 Then calculate line value of first and second hour
// 5 далее рассчитываем значение линии на первом и втором часе
ChartAlertLine line = new ChartAlertLine();
line.TimeFirstPoint = startTime;
line.ValueFirstPoint = startPoint;
line.TimeSecondPoint = endTime;
line.ValueSecondPoint = endPoint;
return(line);
}
/// <summary>
/// take Line for Alert type SpeedLine
/// взять Линии для Алерта типа SpeedLine
/// </summary>
/// <param name="candles">candles/свечки</param>
/// <returns>lines/линии</returns>
private ChartAlertLine[] GetSpeedAlertLines(List <Candle> candles)
{
//1) Specify first point/Указываем первую точку
//2) Specify second point/Указываем вторую точку
//3) Rectangle built between points/Между точками строиться прямоугольник
//4) Vertical catheter is overlaid with three dots. At same time, on ascending movement, countdown from bottom to top: proportion 0.382______ 0.487_______ 0.618. We draw three lines through them.
//4) По вертикальному катету накладываем три точки. При этом на восходящем движении отсчет идет снизу вверх: пропорция 0.382______ 0.487_______ 0.618. Проводим через них три линии.
decimal valueOneClick = _candleOneValue;
decimal valueTwoClick;
decimal devider = Convert.ToDecimal(Slider.Value - 100);
valueTwoClick = _candleTwoValue + _candleTwoValue * Convert.ToDecimal(devider / 1000);
// 1 if points are pressed on one straight line
// 1 если нажаты точки на одной прямой
if (valueTwoClick == valueOneClick)
{
decimal valueOne = _candleOneValue;
decimal valueTwo = _candleTwoValue;
int numberOne = _candleOneNumber;
int numberTwo = _candleTwoNumber;
ChartAlertLine[] lines = { AlertLineCreate(valueOne, valueTwo, numberOne, numberTwo, candles) };
return(lines);
}
// 2 find the height of cathetus
// 2 находим высоту катета
decimal highKatet;
bool isUpSpeedLine;
if (valueTwoClick > valueOneClick)
{
isUpSpeedLine = true;
highKatet = valueTwoClick - valueOneClick;
}
else
{
isUpSpeedLine = false;
highKatet = valueOneClick - valueTwoClick;
}
// declare points for three lines
// объявляем точки для трёх линий
decimal firstValueToAllLine = _candleOneValue;
int firstNumberToAllLine = _candleOneNumber;
int secondNumberToAllLine = _candleTwoNumber;
decimal oneLineValue;
decimal twoLineValue;
decimal threeLineValue;
if (isUpSpeedLine)
{
oneLineValue = valueOneClick + highKatet * 0.382m;
twoLineValue = valueOneClick + highKatet * 0.487m;
threeLineValue = valueOneClick + highKatet * 0.618m;
}
else
{
oneLineValue = valueOneClick - highKatet * 0.382m;
twoLineValue = valueOneClick - highKatet * 0.487m;
threeLineValue = valueOneClick - highKatet * 0.618m;
}
ChartAlertLine oneLine = AlertLineCreate(firstValueToAllLine, oneLineValue, firstNumberToAllLine,
secondNumberToAllLine, candles);
ChartAlertLine twoLine = AlertLineCreate(firstValueToAllLine, twoLineValue, firstNumberToAllLine,
secondNumberToAllLine, candles);
ChartAlertLine treeLine = AlertLineCreate(firstValueToAllLine, threeLineValue, firstNumberToAllLine,
secondNumberToAllLine, candles);
ChartAlertLine[] alertLines = { oneLine, twoLine, treeLine };
return(alertLines);
}
