public BSActorAvatarMove(BSScene physicsScene, BSPhysObject pObj, string actorName)
: base(physicsScene, pObj, actorName)
{
m_velocityMotor = null;
m_walkingUpStairs = 0;
m_physicsScene.DetailLog("{0},BSActorAvatarMove,constructor", m_controllingPrim.LocalID);
}
public BSActorAvatarMove(BSScene physicsScene, BSPhysObject pObj, string actorName)
: base(physicsScene, pObj, actorName)
{
m_velocityMotor = null;
m_walkingUpStairs = 0;
m_physicsScene.DetailLog("{0},BSActorAvatarMove,constructor", m_controllingPrim.LocalID);
}
// If a hover motor has not been created, create one and start the hovering.
private void ActivateMoveToTarget()
{
if (m_targetMotor == null)
{
// We're taking over after this.
m_controllingPrim.ZeroMotion(true);
/* Someday use the PID controller
* m_targetMotor = new BSPIDVMotor("BSActorMoveToTarget-" + m_controllingPrim.LocalID.ToString());
* m_targetMotor.TimeScale = m_controllingPrim.MoveToTargetTau;
* m_targetMotor.Efficiency = 1f;
*/
m_targetMotor = new BSVMotor("BSActorMoveToTarget-" + m_controllingPrim.LocalID.ToString(),
m_controllingPrim.MoveToTargetTau, // timeScale
BSMotor.Infinite, // decay time scale
1f // efficiency
);
m_targetMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG so motor will output detail log messages.
m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget);
m_targetMotor.SetCurrent(m_controllingPrim.RawPosition);
// m_physicsScene.BeforeStep += Mover;
m_physicsScene.BeforeStep += Mover2;
}
else
{
// If already allocated, make sure the target and other paramters are current
m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget);
m_targetMotor.SetCurrent(m_controllingPrim.RawPosition);
}
}
private void DeactivateAvatarMove()
{
if (m_velocityMotor != null)
{
m_controllingPrim.OnPreUpdateProperty -= Process_OnPreUpdateProperty;
m_physicsScene.BeforeStep -= Mover;
m_velocityMotor = null;
}
}
private void DeactivateMoveToTarget()
{
if (m_targetMotor != null)
{
// m_physicsScene.BeforeStep -= Mover;
m_physicsScene.BeforeStep -= Mover2;
m_targetMotor = null;
}
}
// If a hover motor has not been created, create one and start the hovering.
private void ActivateAvatarMove()
{
if (m_velocityMotor == null)
{
// Infinite decay and timescale values so motor only changes current to target values.
m_velocityMotor = new BSVMotor("BSCharacter.Velocity",
0.2f, // time scale
BSMotor.Infinite, // decay time scale
1f // efficiency
);
m_velocityMotor.ErrorZeroThreshold = BSParam.AvatarStopZeroThreshold;
// _velocityMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages.
SetVelocityAndTarget(m_controllingPrim.RawVelocity, m_controllingPrim.TargetVelocity, true /* inTaintTime */);
m_physicsScene.BeforeStep += Mover;
m_controllingPrim.OnPreUpdateProperty += Process_OnPreUpdateProperty;
m_walkingUpStairs = 0;
}
}
// If a hover motor has not been created, create one and start the hovering.
private void ActivateMoveToTarget()
{
if (m_targetMotor == null)
{
// We're taking over after this.
m_controllingPrim.ZeroMotion(true);
/* Someday use the PID controller
m_targetMotor = new BSPIDVMotor("BSActorMoveToTarget-" + m_controllingPrim.LocalID.ToString());
m_targetMotor.TimeScale = m_controllingPrim.MoveToTargetTau;
m_targetMotor.Efficiency = 1f;
*/
m_targetMotor = new BSVMotor("BSActorMoveToTarget-" + m_controllingPrim.LocalID.ToString(),
m_controllingPrim.MoveToTargetTau, // timeScale
BSMotor.Infinite, // decay time scale
1f // efficiency
);
m_targetMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG so motor will output detail log messages.
m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget);
m_targetMotor.SetCurrent(m_controllingPrim.RawPosition);
// m_physicsScene.BeforeStep += Mover;
m_physicsScene.BeforeStep += Mover2;
}
else
{
// If already allocated, make sure the target and other paramters are current
m_targetMotor.SetTarget(m_controllingPrim.MoveToTargetTarget);
m_targetMotor.SetCurrent(m_controllingPrim.RawPosition);
}
}
public BSActorMoveToTarget(BSScene physicsScene, BSPhysObject pObj, string actorName)
: base(physicsScene, pObj, actorName)
{
m_targetMotor = null;
m_physicsScene.DetailLog("{0},BSActorMoveToTarget,constructor", m_controllingPrim.LocalID);
}
private void DeactivateMoveToTarget()
{
if (m_targetMotor != null)
{
// m_physicsScene.BeforeStep -= Mover;
m_physicsScene.BeforeStep -= Mover2;
m_targetMotor = null;
}
}
private void DeactivateAvatarMove()
{
if (m_velocityMotor != null)
{
m_controllingPrim.OnPreUpdateProperty -= Process_OnPreUpdateProperty;
m_physicsScene.BeforeStep -= Mover;
m_velocityMotor = null;
}
}
// If a hover motor has not been created, create one and start the hovering.
private void ActivateAvatarMove()
{
if (m_velocityMotor == null)
{
// Infinite decay and timescale values so motor only changes current to target values.
m_velocityMotor = new BSVMotor("BSCharacter.Velocity",
0.2f, // time scale
BSMotor.Infinite, // decay time scale
1f // efficiency
);
m_velocityMotor.ErrorZeroThreshold = BSParam.AvatarStopZeroThreshold;
// _velocityMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG so motor will output detail log messages.
SetVelocityAndTarget(m_controllingPrim.RawVelocity, m_controllingPrim.TargetVelocity, true /* inTaintTime */);
m_physicsScene.BeforeStep += Mover;
m_controllingPrim.OnPreUpdateProperty += Process_OnPreUpdateProperty;
m_walkingUpStairs = 0;
}
}
public BSActorMoveToTarget(BSScene physicsScene, BSPhysObject pObj, string actorName)
: base(physicsScene, pObj, actorName)
{
m_targetMotor = null;
m_physicsScene.DetailLog("{0},BSActorMoveToTarget,constructor", m_controllingPrim.LocalID);
}
public void ProcessTypeChange(Vehicle pType)
{
VDetailLog("{0},ProcessTypeChange,type={1}", ControllingPrim.LocalID, pType);
// Set Defaults For Type
Type = pType;
switch (pType)
{
case Vehicle.TYPE_NONE:
m_linearMotorDirection = Vector3.Zero;
m_linearMotorTimescale = 0;
m_linearMotorDecayTimescale = 0;
m_linearFrictionTimescale = new Vector3(0, 0, 0);
m_angularMotorDirection = Vector3.Zero;
m_angularMotorDecayTimescale = 0;
m_angularMotorTimescale = 0;
m_angularFrictionTimescale = new Vector3(0, 0, 0);
m_VhoverHeight = 0;
m_VhoverEfficiency = 0;
m_VhoverTimescale = 0;
m_VehicleBuoyancy = 0;
m_linearDeflectionEfficiency = 1;
m_linearDeflectionTimescale = 1;
m_angularDeflectionEfficiency = 0;
m_angularDeflectionTimescale = 1000;
m_verticalAttractionEfficiency = 0;
m_verticalAttractionTimescale = 0;
m_bankingEfficiency = 0;
m_bankingTimescale = 1000;
m_bankingMix = 1;
m_referenceFrame = Quaternion.Identity;
m_flags = (VehicleFlag)0;
break;
case Vehicle.TYPE_SLED:
m_linearMotorDirection = Vector3.Zero;
m_linearMotorTimescale = 1000;
m_linearMotorDecayTimescale = 120;
m_linearFrictionTimescale = new Vector3(30, 1, 1000);
m_angularMotorDirection = Vector3.Zero;
m_angularMotorTimescale = 1000;
m_angularMotorDecayTimescale = 120;
m_angularFrictionTimescale = new Vector3(1000, 1000, 1000);
m_VhoverHeight = 0;
m_VhoverEfficiency = 10; // TODO: this looks wrong!!
m_VhoverTimescale = 10;
m_VehicleBuoyancy = 0;
m_linearDeflectionEfficiency = 1;
m_linearDeflectionTimescale = 1;
m_angularDeflectionEfficiency = 1;
m_angularDeflectionTimescale = 1000;
m_verticalAttractionEfficiency = 0;
m_verticalAttractionTimescale = 0;
m_bankingEfficiency = 0;
m_bankingTimescale = 10;
m_bankingMix = 1;
m_referenceFrame = Quaternion.Identity;
m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
| VehicleFlag.HOVER_TERRAIN_ONLY
| VehicleFlag.HOVER_GLOBAL_HEIGHT
| VehicleFlag.HOVER_UP_ONLY);
m_flags |= (VehicleFlag.NO_DEFLECTION_UP
| VehicleFlag.LIMIT_ROLL_ONLY
| VehicleFlag.LIMIT_MOTOR_UP);
break;
case Vehicle.TYPE_CAR:
m_linearMotorDirection = Vector3.Zero;
m_linearMotorTimescale = 1;
m_linearMotorDecayTimescale = 60;
m_linearFrictionTimescale = new Vector3(100, 2, 1000);
m_angularMotorDirection = Vector3.Zero;
m_angularMotorTimescale = 1;
m_angularMotorDecayTimescale = 0.8f;
m_angularFrictionTimescale = new Vector3(1000, 1000, 1000);
m_VhoverHeight = 0;
m_VhoverEfficiency = 0;
m_VhoverTimescale = 1000;
m_VehicleBuoyancy = 0;
m_linearDeflectionEfficiency = 1;
m_linearDeflectionTimescale = 2;
m_angularDeflectionEfficiency = 0;
m_angularDeflectionTimescale = 10;
m_verticalAttractionEfficiency = 1f;
m_verticalAttractionTimescale = 10f;
m_bankingEfficiency = -0.2f;
m_bankingMix = 1;
m_bankingTimescale = 1;
m_referenceFrame = Quaternion.Identity;
m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
| VehicleFlag.HOVER_TERRAIN_ONLY
| VehicleFlag.HOVER_GLOBAL_HEIGHT);
m_flags |= (VehicleFlag.NO_DEFLECTION_UP
| VehicleFlag.LIMIT_ROLL_ONLY
| VehicleFlag.LIMIT_MOTOR_UP
| VehicleFlag.HOVER_UP_ONLY);
break;
case Vehicle.TYPE_BOAT:
m_linearMotorDirection = Vector3.Zero;
m_linearMotorTimescale = 5;
m_linearMotorDecayTimescale = 60;
m_linearFrictionTimescale = new Vector3(10, 3, 2);
m_angularMotorDirection = Vector3.Zero;
m_angularMotorTimescale = 4;
m_angularMotorDecayTimescale = 4;
m_angularFrictionTimescale = new Vector3(10,10,10);
m_VhoverHeight = 0;
m_VhoverEfficiency = 0.5f;
m_VhoverTimescale = 2;
m_VehicleBuoyancy = 1;
m_linearDeflectionEfficiency = 0.5f;
m_linearDeflectionTimescale = 3;
m_angularDeflectionEfficiency = 0.5f;
m_angularDeflectionTimescale = 5;
m_verticalAttractionEfficiency = 0.5f;
m_verticalAttractionTimescale = 5f;
m_bankingEfficiency = -0.3f;
m_bankingMix = 0.8f;
m_bankingTimescale = 1;
m_referenceFrame = Quaternion.Identity;
m_flags &= ~(VehicleFlag.HOVER_TERRAIN_ONLY
| VehicleFlag.HOVER_GLOBAL_HEIGHT
| VehicleFlag.LIMIT_ROLL_ONLY
| VehicleFlag.HOVER_UP_ONLY);
m_flags |= (VehicleFlag.NO_DEFLECTION_UP
| VehicleFlag.LIMIT_MOTOR_UP
| VehicleFlag.HOVER_WATER_ONLY);
break;
case Vehicle.TYPE_AIRPLANE:
m_linearMotorDirection = Vector3.Zero;
m_linearMotorTimescale = 2;
m_linearMotorDecayTimescale = 60;
m_linearFrictionTimescale = new Vector3(200, 10, 5);
m_angularMotorDirection = Vector3.Zero;
m_angularMotorTimescale = 4;
m_angularMotorDecayTimescale = 4;
m_angularFrictionTimescale = new Vector3(20, 20, 20);
m_VhoverHeight = 0;
m_VhoverEfficiency = 0.5f;
m_VhoverTimescale = 1000;
m_VehicleBuoyancy = 0;
m_linearDeflectionEfficiency = 0.5f;
m_linearDeflectionTimescale = 3;
m_angularDeflectionEfficiency = 1;
m_angularDeflectionTimescale = 2;
m_verticalAttractionEfficiency = 0.9f;
m_verticalAttractionTimescale = 2f;
m_bankingEfficiency = 1;
m_bankingMix = 0.7f;
m_bankingTimescale = 2;
m_referenceFrame = Quaternion.Identity;
m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
| VehicleFlag.HOVER_TERRAIN_ONLY
| VehicleFlag.HOVER_GLOBAL_HEIGHT
| VehicleFlag.HOVER_UP_ONLY
| VehicleFlag.NO_DEFLECTION_UP
| VehicleFlag.LIMIT_MOTOR_UP);
m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY);
break;
case Vehicle.TYPE_BALLOON:
m_linearMotorDirection = Vector3.Zero;
m_linearMotorTimescale = 5;
m_linearFrictionTimescale = new Vector3(5, 5, 5);
m_linearMotorDecayTimescale = 60;
m_angularMotorDirection = Vector3.Zero;
m_angularMotorTimescale = 6;
m_angularFrictionTimescale = new Vector3(10, 10, 10);
m_angularMotorDecayTimescale = 10;
m_VhoverHeight = 5;
m_VhoverEfficiency = 0.8f;
m_VhoverTimescale = 10;
m_VehicleBuoyancy = 1;
m_linearDeflectionEfficiency = 0;
m_linearDeflectionTimescale = 5;
m_angularDeflectionEfficiency = 0;
m_angularDeflectionTimescale = 5;
m_verticalAttractionEfficiency = 1f;
m_verticalAttractionTimescale = 100f;
m_bankingEfficiency = 0;
m_bankingMix = 0.7f;
m_bankingTimescale = 5;
m_referenceFrame = Quaternion.Identity;
m_referenceFrame = Quaternion.Identity;
m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY
| VehicleFlag.HOVER_TERRAIN_ONLY
| VehicleFlag.HOVER_UP_ONLY
| VehicleFlag.NO_DEFLECTION_UP
| VehicleFlag.LIMIT_MOTOR_UP);
m_flags |= (VehicleFlag.LIMIT_ROLL_ONLY
| VehicleFlag.HOVER_GLOBAL_HEIGHT);
break;
}
m_linearMotor = new BSVMotor("LinearMotor", m_linearMotorTimescale, m_linearMotorDecayTimescale, 1f);
// m_linearMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG DEBUG (enables detail logging)
m_angularMotor = new BSVMotor("AngularMotor", m_angularMotorTimescale, m_angularMotorDecayTimescale, 1f);
// m_angularMotor.PhysicsScene = m_physicsScene; // DEBUG DEBUG DEBUG (enables detail logging)
/* Not implemented
m_verticalAttractionMotor = new BSVMotor("VerticalAttraction", m_verticalAttractionTimescale,
BSMotor.Infinite, BSMotor.InfiniteVector,
m_verticalAttractionEfficiency);
// Z goes away and we keep X and Y
m_verticalAttractionMotor.PhysicsScene = PhysicsScene; // DEBUG DEBUG DEBUG (enables detail logging)
*/
if (this.Type == Vehicle.TYPE_NONE)
{
UnregisterForSceneEvents();
}
else
{
RegisterForSceneEvents();
}
// Update any physical parameters based on this type.
Refresh();
}
