bool CanTargetActor(Actor self, Target target, ref TargetModifiers modifiers, ref string cursor)
{
IsQueued = modifiers.HasModifier(TargetModifiers.ForceQueue);
if (modifiers.HasModifier(TargetModifiers.ForceMove))
{
return(false);
}
if (ab.Info.ForceFireIgnoresActors && modifiers.HasModifier(TargetModifiers.ForceAttack))
{
return(false);
}
// Disguised actors are revealed by the attack cursor
// HACK: works around limitations in the targeting code that force the
// targeting and attacking logic (which should be logically separate)
// to use the same code
if (target.Type == TargetType.Actor && target.Actor.EffectiveOwner != null &&
target.Actor.EffectiveOwner.Disguised && self.Owner.Stances[target.Actor.Owner] == Stance.Enemy)
{
modifiers |= TargetModifiers.ForceAttack;
}
var forceAttack = modifiers.HasModifier(TargetModifiers.ForceAttack);
var armaments = ab.ChooseArmamentsForTarget(target, forceAttack);
if (!armaments.Any())
{
return(false);
}
// Use valid armament with highest range out of those that have ammo
// If all are out of ammo, just use valid armament with highest range
armaments = armaments.OrderByDescending(x => x.MaxRange());
var a = armaments.FirstOrDefault(x => !x.IsTraitPaused);
if (a == null)
{
a = armaments.First();
}
var outOfRange = !target.IsInRange(self.CenterPosition, a.MaxRange()) ||
(!forceAttack && target.Type == TargetType.FrozenActor && !ab.Info.TargetFrozenActors);
if (outOfRange && ab.Info.OutsideRangeRequiresForceFire && !modifiers.HasModifier(TargetModifiers.ForceAttack))
{
return(false);
}
cursor = outOfRange ? ab.Info.OutsideRangeCursor ?? a.Info.OutsideRangeCursor : ab.Info.Cursor ?? a.Info.Cursor;
if (!forceAttack)
{
return(true);
}
OrderID = ab.forceAttackOrderName;
return(true);
}
bool CanTargetActor(Actor self, Target target, ref TargetModifiers modifiers, ref string cursor)
{
IsQueued = modifiers.HasModifier(TargetModifiers.ForceQueue);
if (modifiers.HasModifier(TargetModifiers.ForceMove))
{
return(false);
}
// Disguised actors are revealed by the attack cursor
// HACK: works around limitations in the targeting code that force the
// targeting and attacking logic (which should be logically separate)
// to use the same code
if (target.Type == TargetType.Actor && target.Actor.EffectiveOwner != null &&
target.Actor.EffectiveOwner.Disguised && self.Owner.Stances[target.Actor.Owner] == Stance.Enemy)
{
modifiers |= TargetModifiers.ForceAttack;
}
var forceAttack = modifiers.HasModifier(TargetModifiers.ForceAttack);
var a = ab.ChooseArmamentsForTarget(target, forceAttack).FirstOrDefault();
if (a == null)
{
return(false);
}
cursor = !target.IsInRange(self.CenterPosition, a.MaxRange())
? ab.Info.OutsideRangeCursor ?? a.Info.OutsideRangeCursor
: ab.Info.Cursor ?? a.Info.Cursor;
if (!forceAttack)
{
return(true);
}
OrderID = ab.forceAttackOrderName;
return(true);
}
Actor ChooseTarget(Actor self, WDist range, bool allowMove)
{
var inRange = self.World.FindActorsInCircle(self.CenterPosition, range)
.Where(a => !a.Info.HasTraitInfo <AutoTargetIgnoreInfo>());
// Armaments are enumerated in attack.Armaments in construct order
// When autotargeting, first choose targets according to the used armament construct order
// And then according to distance from actor
// This enables preferential treatment of certain armaments
// (e.g. tesla trooper's tesla zap should have precedence over tesla charge)
var actorByArmament = inRange
// Select only the first compatible armament for each actor: if this actor is selected
// it will be thanks to the first armament anyways, since that is the first selection
// criterion
.Select(a =>
{
var target = Target.FromActor(a);
return(new KeyValuePair <Armament, Actor>(
attack.ChooseArmamentsForTarget(target, false)
.FirstOrDefault(arm => allowMove ||
(target.IsInRange(self.CenterPosition, arm.MaxRange()) &&
!target.IsInRange(self.CenterPosition, arm.Weapon.MinRange))), a));
})
.Where(kv => kv.Key != null && (self.Owner.HasFogVisibility || self.Owner.CanViewActor(kv.Value)))
.GroupBy(kv => kv.Key, kv => kv.Value)
.ToDictionary(kv => kv.Key, kv => kv.ClosestTo(self));
foreach (var arm in attack.Armaments)
{
Actor actor;
if (actorByArmament.TryGetValue(arm, out actor))
{
return(actor);
}
}
return(null);
}
Actor ChooseTarget(Actor self, AttackBase ab, Stance attackStances, WDist range, bool allowMove)
{
var actorsByArmament = new Dictionary <Armament, List <Actor> >();
var actorsInRange = self.World.FindActorsInCircle(self.CenterPosition, range);
foreach (var actor in actorsInRange)
{
// PERF: Most units can only attack enemy units. If this is the case but the target is not an enemy, we
// can bail early and avoid the more expensive targeting checks and armament selection. For groups of
// allied units, this helps significantly reduce the cost of auto target scans. This is important as
// these groups will continuously rescan their allies until an enemy finally comes into range.
if (attackStances == OpenRA.Traits.Stance.Enemy && !actor.AppearsHostileTo(self))
{
continue;
}
if (PreventsAutoTarget(self, actor) || !self.Owner.CanTargetActor(actor))
{
continue;
}
// Select only the first compatible armament for each actor: if this actor is selected
// it will be thanks to the first armament anyways, since that is the first selection
// criterion
var target = Target.FromActor(actor);
var armaments = ab.ChooseArmamentsForTarget(target, false);
if (!allowMove)
{
armaments = armaments.Where(arm =>
target.IsInRange(self.CenterPosition, arm.MaxRange()) &&
!target.IsInRange(self.CenterPosition, arm.Weapon.MinRange));
}
var armament = armaments.FirstOrDefault();
if (armament == null)
{
continue;
}
List <Actor> actors;
if (actorsByArmament.TryGetValue(armament, out actors))
{
actors.Add(actor);
}
else
{
actorsByArmament.Add(armament, new List <Actor> {
actor
});
}
}
// Armaments are enumerated in attack.Armaments in construct order
// When autotargeting, first choose targets according to the used armament construct order
// And then according to distance from actor
// This enables preferential treatment of certain armaments
// (e.g. tesla trooper's tesla zap should have precedence over tesla charge)
foreach (var arm in ab.Armaments)
{
List <Actor> actors;
if (actorsByArmament.TryGetValue(arm, out actors))
{
return(actors.ClosestTo(self));
}
}
return(null);
}
Target ChooseTarget(Actor self, AttackBase ab, Stance attackStances, WDist scanRange, bool allowMove, bool allowTurn)
{
var chosenTarget = Target.Invalid;
var chosenTargetPriority = int.MinValue;
int chosenTargetRange = 0;
var activePriorities = activeTargetPriorities.ToList();
if (activePriorities.Count == 0)
{
return(chosenTarget);
}
var targetsInRange = self.World.FindActorsInCircle(self.CenterPosition, scanRange)
.Select(Target.FromActor)
.Concat(self.Owner.FrozenActorLayer.FrozenActorsInCircle(self.World, self.CenterPosition, scanRange)
.Select(Target.FromFrozenActor));
foreach (var target in targetsInRange)
{
BitSet <TargetableType> targetTypes;
Player owner;
if (target.Type == TargetType.Actor)
{
// PERF: Most units can only attack enemy units. If this is the case but the target is not an enemy, we
// can bail early and avoid the more expensive targeting checks and armament selection. For groups of
// allied units, this helps significantly reduce the cost of auto target scans. This is important as
// these groups will continuously rescan their allies until an enemy finally comes into range.
if (attackStances == OpenRA.Traits.Stance.Enemy && !target.Actor.AppearsHostileTo(self))
{
continue;
}
// Check whether we can auto-target this actor
targetTypes = target.Actor.GetEnabledTargetTypes();
if (PreventsAutoTarget(self, target.Actor) || !target.Actor.CanBeViewedByPlayer(self.Owner))
{
continue;
}
owner = target.Actor.Owner;
}
else if (target.Type == TargetType.FrozenActor)
{
if (attackStances == OpenRA.Traits.Stance.Enemy && self.Owner.Stances[target.FrozenActor.Owner] == OpenRA.Traits.Stance.Ally)
{
continue;
}
targetTypes = target.FrozenActor.TargetTypes;
owner = target.FrozenActor.Owner;
}
else
{
continue;
}
var validPriorities = activePriorities.Where(ati =>
{
// Already have a higher priority target
if (ati.Priority < chosenTargetPriority)
{
return(false);
}
// Incompatible stances
if (!ati.ValidStances.HasStance(self.Owner.Stances[owner]))
{
return(false);
}
// Incompatible target types
if (!ati.ValidTargets.Overlaps(targetTypes) || ati.InvalidTargets.Overlaps(targetTypes))
{
return(false);
}
return(true);
}).ToList();
if (validPriorities.Count == 0)
{
continue;
}
// Make sure that we can actually fire on the actor
var armaments = ab.ChooseArmamentsForTarget(target, false);
if (!allowMove)
{
armaments = armaments.Where(arm =>
target.IsInRange(self.CenterPosition, arm.MaxRange()) &&
!target.IsInRange(self.CenterPosition, arm.Weapon.MinRange));
}
if (!armaments.Any())
{
continue;
}
if (!allowTurn && !ab.TargetInFiringArc(self, target, ab.Info.FacingTolerance))
{
continue;
}
// Evaluate whether we want to target this actor
var targetRange = (target.CenterPosition - self.CenterPosition).Length;
foreach (var ati in validPriorities)
{
if (chosenTarget.Type == TargetType.Invalid || chosenTargetPriority < ati.Priority ||
(chosenTargetPriority == ati.Priority && targetRange < chosenTargetRange))
{
chosenTarget = target;
chosenTargetPriority = ati.Priority;
chosenTargetRange = targetRange;
}
}
}
return(chosenTarget);
}
Actor ChooseTarget(Actor self, AttackBase ab, Stance attackStances, WDist scanRange, bool allowMove)
{
Actor chosenTarget = null;
var chosenTargetPriority = int.MinValue;
int chosenTargetRange = 0;
var activePriorities = targetPriorities.Where(Exts.IsTraitEnabled)
.Select(at => at.Info)
.OrderByDescending(ati => ati.Priority)
.ToList();
if (!activePriorities.Any())
{
return(null);
}
var actorsInRange = self.World.FindActorsInCircle(self.CenterPosition, scanRange);
foreach (var actor in actorsInRange)
{
// PERF: Most units can only attack enemy units. If this is the case but the target is not an enemy, we
// can bail early and avoid the more expensive targeting checks and armament selection. For groups of
// allied units, this helps significantly reduce the cost of auto target scans. This is important as
// these groups will continuously rescan their allies until an enemy finally comes into range.
if (attackStances == OpenRA.Traits.Stance.Enemy && !actor.AppearsHostileTo(self))
{
continue;
}
// Check whether we can auto-target this actor
var targetTypes = actor.TraitsImplementing <ITargetable>()
.Where(Exts.IsTraitEnabled).SelectMany(t => t.TargetTypes)
.ToHashSet();
var target = Target.FromActor(actor);
var validPriorities = activePriorities.Where(ati =>
{
// Already have a higher priority target
if (ati.Priority < chosenTargetPriority)
{
return(false);
}
// Incompatible target types
if (!targetTypes.Overlaps(ati.ValidTargets) || targetTypes.Overlaps(ati.InvalidTargets))
{
return(false);
}
return(true);
}).ToList();
if (!validPriorities.Any() || PreventsAutoTarget(self, actor) || !actor.CanBeViewedByPlayer(self.Owner))
{
continue;
}
// Make sure that we can actually fire on the actor
var armaments = ab.ChooseArmamentsForTarget(target, false);
if (!allowMove)
{
armaments = armaments.Where(arm =>
target.IsInRange(self.CenterPosition, arm.MaxRange()) &&
!target.IsInRange(self.CenterPosition, arm.Weapon.MinRange));
}
if (!armaments.Any())
{
continue;
}
// Evaluate whether we want to target this actor
var targetRange = (target.CenterPosition - self.CenterPosition).Length;
foreach (var ati in validPriorities)
{
if (chosenTarget == null || chosenTargetPriority < ati.Priority ||
(chosenTargetPriority == ati.Priority && targetRange < chosenTargetRange))
{
chosenTarget = actor;
chosenTargetPriority = ati.Priority;
chosenTargetRange = targetRange;
}
}
}
return(chosenTarget);
}
