///<summary>Takes a user entered string and validates/formats it for the database. Throws an ApplicationException if any formatting errors. User string can contain spaces, dashes, and commas, too.</summary>
public static string FormatRangeForDb(string toothNumbers)
{
if (toothNumbers == null)
{
return("");
}
toothNumbers = toothNumbers.Replace(" ", ""); //remove all spaces
if (toothNumbers == "")
{
return("");
}
string[] toothArray = toothNumbers.Split(','); //some items will contain dashes
List <string> toothList = new List <string>();
string rangebegin;
string rangeend;
int beginint;
int endint;
//not sure how to handle supernumerary. Probably just not acceptable.
for (int i = 0; i < toothArray.Length; i++)
{
if (toothArray[i].Contains("-"))
{
rangebegin = toothArray[i].Split('-')[0];
rangeend = toothArray[i].Split('-')[1];
if (!IsValidEntry(rangebegin))
{
throw new ApplicationException(rangebegin + " " + Lans.g("Tooth", "is not a valid tooth number."));
}
if (!IsValidEntry(rangeend))
{
throw new ApplicationException(rangeend + " " + Lans.g("Tooth", "is not a valid tooth number."));
}
beginint = Tooth.ToOrdinal(GetToothId(rangebegin));
endint = Tooth.ToInt(GetToothId(rangeend));
if (endint < beginint)
{
throw new ApplicationException("Range specified is impossible.");
}
while (beginint <= endint)
{
toothList.Add(Tooth.FromOrdinal(beginint));
beginint++;
}
}
else
{
if (!IsValidEntry(toothArray[i]))
{
throw new ApplicationException(toothArray[i] + " " + Lans.g("Tooth", "is not a valid tooth number."));
}
toothList.Add(Tooth.GetToothId(toothArray[i]));
}
}
toothList.Sort(new ToothComparer());
string retVal = "";
for (int i = 0; i < toothList.Count; i++)
{
if (i > 0)
{
retVal += ",";
}
retVal += toothList[i];
}
return(retVal);
}
public static DataTable GetData(List <long> listProvNums, List <long> listClinicNums, DateTime dateStart, DateTime dateEnd, bool includeNoNotes,
bool includeUnsignedNotes, ToothNumberingNomenclature toothNumberFormat, ProcNoteGroupBy groupBy)
{
if (RemotingClient.RemotingRole == RemotingRole.ClientWeb)
{
return(Meth.GetTable(MethodBase.GetCurrentMethod(), listProvNums, listClinicNums, dateStart, dateEnd, includeNoNotes, includeUnsignedNotes,
toothNumberFormat, groupBy));
}
string whereNoNote = "";
string whereUnsignedNote = "";
string whereNotesClause = "";
if (includeNoNotes)
{
whereNoNote = @"
LEFT JOIN (
SELECT procedurelog.PatNum,procedurelog.ProcDate
FROM procedurelog
INNER JOIN procnote ON procnote.ProcNum=procedurelog.ProcNum
INNER JOIN procedurecode ON procedurecode.CodeNum=procedurelog.CodeNum
AND procedurecode.ProcCode NOT IN ('D9986','D9987')
WHERE procedurelog.ProcDate BETWEEN " + POut.Date(dateStart) + " AND " + POut.Date(dateEnd) + @"
AND (procedurelog.ProcStatus=" + POut.Int((int)ProcStat.C) + " OR (procedurelog.ProcStatus=" + POut.Int((int)ProcStat.EC)
+ @" AND procedurecode.ProcCode='~GRP~'))"
+ @" GROUP BY procedurelog.PatNum,procedurelog.ProcDate
) hasNotes ON hasNotes.PatNum=procedurelog.PatNum AND hasNotes.ProcDate=procedurelog.ProcDate " ;
whereNotesClause = "AND (n1.ProcNum IS NOT NULL OR hasNotes.PatNum IS NULL) ";
}
if (includeUnsignedNotes)
{
if (includeNoNotes)
{
whereNotesClause = "AND (n1.ProcNum IS NOT NULL OR hasNotes.PatNum IS NULL OR unsignedNotes.ProcNum IS NOT NULL)";
}
else
{
whereNotesClause = "AND (n1.ProcNum IS NOT NULL OR unsignedNotes.ProcNum IS NOT NULL)";
}
whereUnsignedNote = @"
LEFT JOIN procnote unsignedNotes ON unsignedNotes.ProcNum=procedurelog.ProcNum
AND unsignedNotes.Signature=''
AND TRIM(unsignedNotes.Note)!=''
AND unsignedNotes.EntryDateTime= (SELECT MAX(n2.EntryDateTime)
FROM procnote n2
WHERE unsignedNotes.ProcNum = n2.ProcNum) " ;
}
string command = @"SELECT MAX(procedurelog.ProcDate) ProcDate,MAX(CONCAT(CONCAT(patient.LName, ', '),patient.FName)) PatName,procedurelog.PatNum,
(CASE WHEN COUNT(procedurelog.ProcNum)=1 THEN MAX(procedurecode.ProcCode) ELSE '' END) ProcCode,
(CASE WHEN COUNT(procedurelog.ProcNum)=1 THEN MAX(procedurecode.Descript) ELSE '" + Lans.g("FormRpProcNote", "Multiple procedures") + @"' END) Descript,
(CASE WHEN COUNT(procedurelog.ProcNum)=1 THEN MAX(procedurelog.ToothNum) ELSE '' END) ToothNum,
(CASE WHEN COUNT(procedurelog.ProcNum)=1 THEN MAX(procedurelog.Surf) ELSE '' END) Surf "
+ (includeNoNotes || includeUnsignedNotes?",(CASE WHEN MAX(n1.ProcNum) IS NOT NULL THEN 'X' ELSE '' END) AS Incomplete ":"")
+ (includeNoNotes?",(CASE WHEN MAX(hasNotes.PatNum) IS NULL THEN 'X' ELSE '' END) AS HasNoNote ":"")
+ (includeUnsignedNotes?",(CASE WHEN MAX(unsignedNotes.ProcNum) IS NOT NULL THEN 'X' ELSE '' END) AS HasUnsignedNote ":"") + @"
FROM procedurelog
INNER JOIN patient ON procedurelog.PatNum = patient.PatNum
INNER JOIN procedurecode ON procedurelog.CodeNum = procedurecode.CodeNum
AND procedurecode.ProcCode NOT IN ('D9986','D9987')
" + (includeNoNotes || includeUnsignedNotes?"LEFT":"INNER") + @" JOIN procnote n1 ON procedurelog.ProcNum = n1.ProcNum
AND (n1.Note LIKE '%""""%' OR n1.Note REGEXP '" + @"\[Prompt:""[a-zA-Z_0-9 ]+""\]') "//looks for either "" (pre 17.3) or [Prompt:"{word}"] (post 17.3)
+ @" AND n1.EntryDateTime= (SELECT MAX(n2.EntryDateTime)
FROM procnote n2
WHERE n1.ProcNum = n2.ProcNum) "
+ whereNoNote + " "
+ whereUnsignedNote + @"
WHERE procedurelog.ProcDate BETWEEN " + POut.Date(dateStart) + " AND " + POut.Date(dateEnd) + @"
AND (procedurelog.ProcStatus=" + POut.Int((int)ProcStat.C)
+ " OR (procedurelog.ProcStatus=" + POut.Int((int)ProcStat.EC) + " "
+ @" AND procedurecode.ProcCode='~GRP~')) "
+ whereNotesClause;
if (listProvNums.Count > 0)
{
command += @"AND procedurelog.ProvNum IN (" + String.Join(",", listProvNums) + ") ";
}
if (listClinicNums.Count > 0)
{
command += @"AND procedurelog.ClinicNum IN (" + String.Join(",", listClinicNums) + ") ";
}
if (groupBy == ProcNoteGroupBy.Patient)
{
command += @"GROUP BY procedurelog.PatNum ";
}
else if (groupBy == ProcNoteGroupBy.DateAndPatient)
{
command += @"GROUP BY procedurelog.ProcDate,procedurelog.PatNum ";
}
else
{
command += "GROUP BY procedurelog.ProcNum ";
}
command += @"ORDER BY ProcDate, LName";
DataTable table = ReportsComplex.RunFuncOnReportServer(() => Db.GetTable(command));
foreach (DataRow row in table.Rows)
{
row["ToothNum"] = Tooth.ToInternat(row["ToothNum"].ToString(), toothNumberFormat);
}
return(table);
}
///<summary>The supplied toothNumbers will be a series of tooth numbers separated by commas. They will be in american format.. For display purposes, ranges will use dashes, and international numbers will be used.</summary>
public static string FormatRangeForDisplay(string toothNumbers)
{
if (toothNumbers == null)
{
return("");
}
toothNumbers = toothNumbers.Replace(" ", ""); //remove all spaces
if (toothNumbers == "")
{
return("");
}
string[] toothArray = toothNumbers.Split(',');
if (toothArray.Length == 1)
{
return(Tooth.GetToothLabel(toothArray[0]));
}
else if (toothArray.Length == 2)
{
return(Tooth.GetToothLabel(toothArray[0]) + "," + Tooth.GetToothLabel(toothArray[1])); //just two numbers separated by comma
}
Array.Sort <string>(toothArray, new ToothComparer());
StringBuilder strbuild = new StringBuilder();
//List<string> toothList=new List<string>();
//strbuild.Append(Tooth.ToInternat(toothArray[0]));//always show the first number
int currentNum;
int nextNum;
int numberInaRow = 1; //must have 3 in a row to trigger dash
for (int i = 0; i < toothArray.Length - 1; i++)
{
//in each loop, we are comparing the current number with the next number
currentNum = Tooth.ToOrdinal(toothArray[i]);
nextNum = Tooth.ToOrdinal(toothArray[i + 1]);
if (nextNum - currentNum == 1 && currentNum != 16 && currentNum != 32) //if sequential (sequences always break at end of arch)
{
numberInaRow++;
}
else
{
numberInaRow = 1;
}
if (numberInaRow < 3) //the next number is not sequential,or if it was a sequence, and it's now broken
{
if (strbuild.Length > 0 && strbuild[strbuild.Length - 1] != '-')
{
strbuild.Append(",");
}
strbuild.Append(Tooth.GetToothLabel(toothArray[i]));
}
else if (numberInaRow == 3) //this way, the dash only gets added exactly once
{
strbuild.Append("-");
}
//else do nothing
}
if (strbuild.Length > 0 && strbuild[strbuild.Length - 1] != '-')
{
strbuild.Append(",");
}
strbuild.Append(Tooth.GetToothLabel(toothArray[toothArray.Length - 1])); //always show the last number
return(strbuild.ToString());
}
private static DataTable GetProcTable(string patNum, string aptNum, string apptStatus)
{
DataConnection dcon = new DataConnection();
DataTable table = new DataTable("Procedure");
DataRow row;
//columns that start with lowercase are altered for display rather than being raw data.
table.Columns.Add("attached"); //0 or 1
table.Columns.Add("CodeNum");
table.Columns.Add("descript");
table.Columns.Add("fee");
table.Columns.Add("priority");
table.Columns.Add("ProcCode");
table.Columns.Add("ProcNum");
table.Columns.Add("ProcStatus");
table.Columns.Add("ProvNum");
table.Columns.Add("status");
table.Columns.Add("toothNum");
table.Columns.Add("Surf");
string command = "SELECT procedurecode.ProcCode,AptNum,PlannedAptNum,Priority,ProcFee,ProcNum,ProcStatus,Surf,ToothNum, "
+ "procedurecode.Descript,procedurelog.CodeNum,procedurelog.ProvNum "
+ "FROM procedurelog LEFT JOIN procedurecode ON procedurelog.CodeNum=procedurecode.CodeNum "
+ "WHERE PatNum=" + patNum //sort later
+ " AND (ProcStatus=1 OR "; //tp
if (apptStatus == "6") //planned
{
command += "PlannedAptNum=" + aptNum + ")";
}
else
{
command += "AptNum=" + aptNum + ") ";
//+"AND (AptNum=0 OR AptNum="+aptNum+")";//exclude procs attached to other appts.
}
DataTable rawProc = dcon.GetTable(command);
for (int i = 0; i < rawProc.Rows.Count; i++)
{
row = table.NewRow();
if (apptStatus == "6") //planned
{
row["attached"] = (rawProc.Rows[i]["PlannedAptNum"].ToString() == aptNum) ? "1" : "0";
}
else
{
row["attached"] = (rawProc.Rows[i]["AptNum"].ToString() == aptNum) ? "1" : "0";
}
row["CodeNum"] = rawProc.Rows[i]["CodeNum"].ToString();
row["descript"] = "";
if (rawProc.Rows[i]["AptNum"].ToString() != "0" && rawProc.Rows[i]["AptNum"].ToString() != aptNum)
{
row["descript"] = Lan.g("FormApptEdit", "(other appt)");
}
row["descript"] += rawProc.Rows[i]["Descript"].ToString();
row["fee"] = PIn.PDouble(rawProc.Rows[i]["ProcFee"].ToString()).ToString("F");
row["priority"] = DefB.GetName(DefCat.TxPriorities, PIn.PInt(rawProc.Rows[i]["Priority"].ToString()));
row["ProcCode"] = rawProc.Rows[i]["ProcCode"].ToString();
row["ProcNum"] = rawProc.Rows[i]["ProcNum"].ToString();
row["ProcStatus"] = rawProc.Rows[i]["ProcStatus"].ToString();
row["ProvNum"] = rawProc.Rows[i]["ProvNum"].ToString();
row["status"] = ((ProcStat)PIn.PInt(rawProc.Rows[i]["ProcStatus"].ToString())).ToString();
row["toothNum"] = Tooth.ToInternat(rawProc.Rows[i]["ToothNum"].ToString());
row["Surf"] = rawProc.Rows[i]["Surf"].ToString();
table.Rows.Add(row);
}
return(table);
}
///<summary>If aptnum is specified, then the dates are ignored. If getting data for one planned appt, then pass isPlanned=true. This changes which procedures are retrieved.</summary>
private static DataTable GetPeriodApptsTable(string strDateStart, string strDateEnd, string strAptNum, string strIsPlanned)
{
DateTime dateStart = PIn.PDate(strDateStart);
DateTime dateEnd = PIn.PDate(strDateEnd);
int aptNum = PIn.PInt(strAptNum);
bool isPlanned = PIn.PBool(strIsPlanned);
DataConnection dcon = new DataConnection();
DataTable table = new DataTable("Appointments");
DataRow row;
//columns that start with lowercase are altered for display rather than being raw data.
table.Columns.Add("age");
table.Columns.Add("addrNote");
table.Columns.Add("apptModNote");
table.Columns.Add("aptDate");
table.Columns.Add("aptDay");
table.Columns.Add("aptLength");
table.Columns.Add("aptTime");
table.Columns.Add("AptDateTime");
table.Columns.Add("AptNum");
table.Columns.Add("AptStatus");
table.Columns.Add("Assistant");
table.Columns.Add("billingType");
table.Columns.Add("chartNumber");
table.Columns.Add("chartNumAndName");
table.Columns.Add("confirmed");
table.Columns.Add("Confirmed");
table.Columns.Add("contactMethods");
table.Columns.Add("creditIns");
table.Columns.Add("famFinUrgNote");
table.Columns.Add("hmPhone");
table.Columns.Add("ImageFolder");
table.Columns.Add("insurance");
table.Columns.Add("IsHygiene");
table.Columns.Add("lab");
table.Columns.Add("MedUrgNote");
table.Columns.Add("Note");
table.Columns.Add("Op");
table.Columns.Add("patientName");
table.Columns.Add("PatNum");
table.Columns.Add("patNum");
table.Columns.Add("GuarNum");
table.Columns.Add("patNumAndName");
table.Columns.Add("Pattern");
table.Columns.Add("preMedFlag");
table.Columns.Add("procs");
table.Columns.Add("production");
table.Columns.Add("productionVal");
table.Columns.Add("provider");
table.Columns.Add("ProvHyg");
table.Columns.Add("ProvNum");
table.Columns.Add("wkPhone");
table.Columns.Add("wirelessPhone");
string command = "SELECT p1.Abbr ProvAbbr,p2.Abbr HygAbbr,patient.AddrNote,"
+ "patient.ApptModNote,AptDateTime,appointment.AptNum,AptStatus,Assistant,"
+ "patient.BillingType,patient.BirthDate,patient.Guarantor,"
+ "patient.ChartNumber,Confirmed,patient.CreditType,DateTimeChecked,DateTimeRecd,DateTimeSent,"
+ "guar.FamFinUrgNote,patient.FName,patient.HmPhone,patient.ImageFolder,IsHygiene,IsNewPatient,"
+ "LabCaseNum,patient.LName,patient.MedUrgNote,patient.MiddleI,Note,Op,appointment.PatNum,"
+ "Pattern,patplan.PlanNum,patient.PreferConfirmMethod,patient.PreferContactMethod,patient.Preferred,"
+ "patient.PreferRecallMethod,patient.Premed,"
+ "(SELECT SUM(ProcFee) FROM procedurelog ";
if (isPlanned)
{
command += "WHERE procedurelog.PlannedAptNum=appointment.AptNum) Production, ";
}
else
{
command += "WHERE procedurelog.AptNum=appointment.AptNum) Production, ";
}
command += "ProvHyg,appointment.ProvNum,patient.WirelessPhone,patient.WkPhone "
+ "FROM appointment LEFT JOIN patient ON patient.PatNum=appointment.PatNum "
+ "LEFT JOIN provider p1 ON p1.ProvNum=appointment.ProvNum "
+ "LEFT JOIN provider p2 ON p2.ProvNum=appointment.ProvHyg ";
if (isPlanned)
{
command += "LEFT JOIN labcase ON labcase.PlannedAptNum=appointment.AptNum ";
}
else
{
command += "LEFT JOIN labcase ON labcase.AptNum=appointment.AptNum ";
}
command += "LEFT JOIN patient guar ON guar.PatNum=patient.Guarantor "
+ "LEFT JOIN patplan ON patplan.PatNum=patient.PatNum ";
if (aptNum == 0)
{
command += "WHERE AptDateTime >= " + POut.PDate(dateStart) + " "
+ "AND AptDateTime < " + POut.PDate(dateEnd.AddDays(1)) + " "
+ "AND (AptStatus=1 OR AptStatus=2 OR AptStatus=4 OR AptStatus=5 OR AptStatus=7 OR AptStatus=8) ";
}
else
{
command += "WHERE appointment.AptNum=" + POut.PInt(aptNum);
}
command += " GROUP BY appointment.AptNum";
DataTable raw = dcon.GetTable(command);
command = "SELECT AbbrDesc,procedurelog.AptNum,procedurelog.CodeNum,PlannedAptNum,Surf,ToothNum,TreatArea "
+ "FROM procedurelog,appointment,procedurecode ";
if (isPlanned)
{
command += "WHERE procedurelog.PlannedAptNum=appointment.AptNum ";
}
else
{
command += "WHERE procedurelog.AptNum=appointment.AptNum ";
}
command += "AND procedurelog.CodeNum=procedurecode.CodeNum ";
if (aptNum == 0)
{
command += "AND AptDateTime >= " + POut.PDate(dateStart) + " "
+ "AND AptDateTime < " + POut.PDate(dateEnd.AddDays(1)) + " ";
}
else
{
command += "AND appointment.AptNum=" + POut.PInt(aptNum);
}
DataTable rawProc = dcon.GetTable(command);
//procs for flag, InsNotSent
command = "SELECT patient.PatNum, patient.Guarantor "
+ "FROM patient,procedurecode,procedurelog,claimproc "
+ "WHERE claimproc.procnum=procedurelog.procnum "
+ "AND patient.PatNum=procedurelog.PatNum "
+ "AND procedurelog.CodeNum=procedurecode.CodeNum "
+ "AND claimproc.NoBillIns=0 "
+ "AND procedurelog.ProcFee>0 "
+ "AND claimproc.Status=6 " //estimate
+ "AND procedurelog.procstatus=2 "
+ "AND procedurelog.ProcDate >= " + POut.PDate(DateTime.Now.AddYears(-1)) + " "
+ "AND procedurelog.ProcDate <= " + POut.PDate(DateTime.Now) + " "
+ "GROUP BY patient.Guarantor";
DataTable rawInsProc = dcon.GetTable(command);
DateTime aptDate;
TimeSpan span;
int hours;
int minutes;
DateTime labDate;
DateTime birthdate;
for (int i = 0; i < raw.Rows.Count; i++)
{
row = table.NewRow();
if (raw.Rows[i]["AddrNote"].ToString() != "")
{
row["addrNote"] = Lan.g("Appointments", "AddrNote: ") + raw.Rows[i]["AddrNote"].ToString();
}
aptDate = PIn.PDateT(raw.Rows[i]["AptDateTime"].ToString());
row["AptDateTime"] = aptDate;
birthdate = PIn.PDate(raw.Rows[i]["Birthdate"].ToString());
row["age"] = Lan.g("Appointments", "Age: ");
if (birthdate.Year > 1880)
{
row["age"] += PatientB.DateToAgeString(birthdate);
}
else
{
row["age"] += "?";
}
if (raw.Rows[i]["ApptModNote"].ToString() != "")
{
row["apptModNote"] = Lan.g("Appointments", "ApptModNote: ") + raw.Rows[i]["ApptModNote"].ToString();
}
row["aptDate"] = aptDate.ToShortDateString();
row["aptDay"] = aptDate.ToString("dddd");
span = TimeSpan.FromMinutes(raw.Rows[i]["Pattern"].ToString().Length *5);
hours = span.Hours;
minutes = span.Minutes;
if (hours == 0)
{
row["aptLength"] = minutes.ToString() + Lan.g("Appointments", " Min");
}
else if (hours == 1)
{
row["aptLength"] = hours.ToString() + Lan.g("Appointments", " Hr, ")
+ minutes.ToString() + Lan.g("Appointments", " Min");
}
else
{
row["aptLength"] = hours.ToString() + Lan.g("Appointments", " Hrs, ")
+ minutes.ToString() + Lan.g("Appointments", " Min");
}
row["aptTime"] = aptDate.ToShortTimeString();
row["AptNum"] = raw.Rows[i]["AptNum"].ToString();
row["AptStatus"] = raw.Rows[i]["AptStatus"].ToString();
row["Assistant"] = raw.Rows[i]["Assistant"].ToString();
row["billingType"] = DefB.GetName(DefCat.BillingTypes, PIn.PInt(raw.Rows[i]["BillingType"].ToString()));
if (raw.Rows[i]["ChartNumber"].ToString() != "")
{
row["chartNumber"] = raw.Rows[i]["ChartNumber"].ToString();
}
//row["ChartNumber"]=raw.Rows[i]["ChartNumber"].ToString();
row["chartNumAndName"] = "";
if (raw.Rows[i]["IsNewPatient"].ToString() == "1")
{
row["chartNumAndName"] = "NP-";
}
row["chartNumAndName"] += raw.Rows[i]["ChartNumber"].ToString() + " "
+ PatientB.GetNameLF(raw.Rows[i]["LName"].ToString(), raw.Rows[i]["FName"].ToString(),
raw.Rows[i]["Preferred"].ToString(), raw.Rows[i]["MiddleI"].ToString());
row["confirmed"] = DefB.GetName(DefCat.ApptConfirmed, PIn.PInt(raw.Rows[i]["Confirmed"].ToString()));
row["Confirmed"] = raw.Rows[i]["Confirmed"].ToString();
row["contactMethods"] = "";
if (raw.Rows[i]["PreferConfirmMethod"].ToString() != "0")
{
row["contactMethods"] += Lan.g("Appointments", "Confirm Method: ")
+ ((ContactMethod)PIn.PInt(raw.Rows[i]["PreferConfirmMethod"].ToString())).ToString();
}
if (raw.Rows[i]["PreferContactMethod"].ToString() != "0")
{
if (row["contactMethods"].ToString() != "")
{
row["contactMethods"] += "\r\n";
}
row["contactMethods"] += Lan.g("Appointments", "Contact Method: ")
+ ((ContactMethod)PIn.PInt(raw.Rows[i]["PreferContactMethod"].ToString())).ToString();
}
if (raw.Rows[i]["PreferRecallMethod"].ToString() != "0")
{
if (row["contactMethods"].ToString() != "")
{
row["contactMethods"] += "\r\n";
}
row["contactMethods"] += Lan.g("Appointments", "Recall Method: ")
+ ((ContactMethod)PIn.PInt(raw.Rows[i]["PreferRecallMethod"].ToString())).ToString();
}
row["creditIns"] = raw.Rows[i]["CreditType"].ToString();
//figure out if pt's family has ins claims that need to be created
bool InsToSend = false;
for (int j = 0; j < rawInsProc.Rows.Count; j++)
{
if (raw.Rows[i]["PlanNum"].ToString() != "" && raw.Rows[i]["PlanNum"].ToString() != "0")
{
if (raw.Rows[i]["Guarantor"].ToString() == rawInsProc.Rows[j]["Guarantor"].ToString() ||
raw.Rows[i]["Guarantor"].ToString() == rawInsProc.Rows[j]["PatNum"].ToString())
{
InsToSend = true;
}
}
}
if (InsToSend)
{
row["creditIns"] += "!";
}
else if (raw.Rows[i]["PlanNum"].ToString() != "" && raw.Rows[i]["PlanNum"].ToString() != "0")
{
row["creditIns"] += "I";
}
if (raw.Rows[i]["FamFinUrgNote"].ToString() != "")
{
row["famFinUrgNote"] = Lan.g("Appointments", "FamFinUrgNote: ") + raw.Rows[i]["FamFinUrgNote"].ToString();
}
row["hmPhone"] = Lan.g("Appointments", "Hm: ") + raw.Rows[i]["HmPhone"].ToString();
row["ImageFolder"] = raw.Rows[i]["ImageFolder"].ToString();
if (raw.Rows[i]["PlanNum"].ToString() != "" && raw.Rows[i]["PlanNum"].ToString() != "0")
{
row["insurance"] = Lan.g("Appointments", "Insured");
}
row["IsHygiene"] = raw.Rows[i]["IsHygiene"].ToString();
row["lab"] = "";
if (raw.Rows[i]["LabCaseNum"].ToString() != "")
{
labDate = PIn.PDateT(raw.Rows[i]["DateTimeChecked"].ToString());
if (labDate.Year > 1880)
{
row["lab"] = Lan.g("Appointments", "Lab Quality Checked");
}
else
{
labDate = PIn.PDateT(raw.Rows[i]["DateTimeRecd"].ToString());
if (labDate.Year > 1880)
{
row["lab"] = Lan.g("Appointments", "Lab Received");
}
else
{
labDate = PIn.PDateT(raw.Rows[i]["DateTimeSent"].ToString());
if (labDate.Year > 1880)
{
row["lab"] = Lan.g("Appointments", "Lab Sent"); //sent but not received
}
else
{
row["lab"] = Lan.g("Appointments", "Lab Not Sent");
}
}
}
}
row["MedUrgNote"] = raw.Rows[i]["MedUrgNote"].ToString();
row["Note"] = raw.Rows[i]["Note"].ToString();
row["Op"] = raw.Rows[i]["Op"].ToString();
if (raw.Rows[i]["IsNewPatient"].ToString() == "1")
{
row["patientName"] = "NP-";
}
row["patientName"] += PatientB.GetNameLF(raw.Rows[i]["LName"].ToString(), raw.Rows[i]["FName"].ToString(),
raw.Rows[i]["Preferred"].ToString(), raw.Rows[i]["MiddleI"].ToString());
row["PatNum"] = raw.Rows[i]["PatNum"].ToString();
row["patNum"] = "PatNum: " + raw.Rows[i]["PatNum"].ToString();
row["GuarNum"] = raw.Rows[i]["Guarantor"].ToString();
row["patNumAndName"] = "";
if (raw.Rows[i]["IsNewPatient"].ToString() == "1")
{
row["patNumAndName"] = "NP-";
}
row["patNumAndName"] += raw.Rows[i]["PatNum"].ToString() + " "
+ PatientB.GetNameLF(raw.Rows[i]["LName"].ToString(), raw.Rows[i]["FName"].ToString(),
raw.Rows[i]["Preferred"].ToString(), raw.Rows[i]["MiddleI"].ToString());
row["Pattern"] = raw.Rows[i]["Pattern"].ToString();
if (raw.Rows[i]["Premed"].ToString() == "1")
{
row["preMedFlag"] = Lan.g("Appointments", "Premedicate");
}
row["procs"] = "";
for (int p = 0; p < rawProc.Rows.Count; p++)
{
if (!isPlanned && rawProc.Rows[p]["AptNum"].ToString() != raw.Rows[i]["AptNum"].ToString())
{
continue;
}
if (isPlanned && rawProc.Rows[p]["PlannedAptNum"].ToString() != raw.Rows[i]["AptNum"].ToString())
{
continue;
}
if (row["procs"].ToString() != "")
{
row["procs"] += ", ";
}
switch (rawProc.Rows[p]["TreatArea"].ToString())
{
case "1": //TreatmentArea.Surf:
row["procs"] += "#" + Tooth.ToInternat(rawProc.Rows[p]["ToothNum"].ToString()) + "-"
+ rawProc.Rows[p]["Surf"].ToString() + "-"; //""#12-MOD-"
break;
case "2": //TreatmentArea.Tooth:
row["procs"] += "#" + Tooth.ToInternat(rawProc.Rows[p]["ToothNum"].ToString()) + "-"; //"#12-"
break;
default: //area 3 or 0 (mouth)
break;
case "4": //TreatmentArea.Quad:
row["procs"] += rawProc.Rows[p]["Surf"].ToString() + "-"; //"UL-"
break;
case "5": //TreatmentArea.Sextant:
row["procs"] += "S" + rawProc.Rows[p]["Surf"].ToString() + "-"; //"S2-"
break;
case "6": //TreatmentArea.Arch:
row["procs"] += rawProc.Rows[p]["Surf"].ToString() + "-"; //"U-"
break;
case "7": //TreatmentArea.ToothRange:
//strLine+=table.Rows[j][13].ToString()+" ";//don't show range
break;
}
row["procs"] += rawProc.Rows[p]["AbbrDesc"].ToString();
}
row["production"] = PIn.PDouble(raw.Rows[i]["Production"].ToString()).ToString("c");
row["productionVal"] = raw.Rows[i]["Production"].ToString();
if (raw.Rows[i]["IsHygiene"].ToString() == "1")
{
row["provider"] = raw.Rows[i]["HygAbbr"].ToString();
if (raw.Rows[i]["ProvAbbr"].ToString() != "")
{
row["provider"] += " (" + raw.Rows[i]["ProvAbbr"].ToString() + ")";
}
}
else
{
row["provider"] = raw.Rows[i]["ProvAbbr"].ToString();
if (raw.Rows[i]["HygAbbr"].ToString() != "")
{
row["provider"] += " (" + raw.Rows[i]["HygAbbr"].ToString() + ")";
}
}
row["ProvNum"] = raw.Rows[i]["ProvNum"].ToString();
row["ProvHyg"] = raw.Rows[i]["ProvHyg"].ToString();
row["wirelessPhone"] = Lan.g("Appointments", "Cell: ") + raw.Rows[i]["WirelessPhone"].ToString();
row["wkPhone"] = Lan.g("Appointments", "Wk: ") + raw.Rows[i]["WkPhone"].ToString();
table.Rows.Add(row);
}
return(table);
}
///<summary>The supplied DataRows must include the following columns: ProcStatus(optional),Priority(optional),ToothRange,ToothNum,ProcCode. This sorts procedures based on priority, then tooth number, then procCode. It does not care about dates or status. Currently used in Account module, appointments, and Chart module sorting. TP uses Procedures.ProcedureComparer.</summary>
public static int CompareProcedures(DataRow x, DataRow y)
{
//first, by status
if (x.Table.Columns.Contains("ProcStatus") && y.Table.Columns.Contains("ProcStatus"))
{
if (x["ProcStatus"].ToString() != y["ProcStatus"].ToString())
{
//Cn,TP,R,EO,EC,C,D
int xIdx = 0;
switch (x["ProcStatus"].ToString())
{
case "7": //Cn
xIdx = 0;
break;
case "1": //TP
xIdx = 1;
break;
case "5": //R
xIdx = 2;
break;
case "4": //EO
xIdx = 3;
break;
case "3": //EC
xIdx = 4;
break;
case "2": //C
xIdx = 5;
break;
case "6": //D
xIdx = 6;
break;
}
int yIdx = 0;
switch (y["ProcStatus"].ToString())
{
case "7": //Cn
yIdx = 0;
break;
case "1": //TP
yIdx = 1;
break;
case "5": //R
yIdx = 2;
break;
case "4": //EO
yIdx = 3;
break;
case "3": //EC
yIdx = 4;
break;
case "2": //C
yIdx = 5;
break;
case "6": //D
yIdx = 6;
break;
}
return(xIdx.CompareTo(yIdx));
}
}
//by priority
if (x.Table.Columns.Contains("Priority") && y.Table.Columns.Contains("Priority"))
{
if (x["Priority"].ToString() != y["Priority"].ToString()) //if priorities are different
{
if (x["Priority"].ToString() == "0")
{
return(1); //x is greater than y. Priorities always come first.
}
if (y["Priority"].ToString() == "0")
{
return(-1); //x is less than y. Priorities always come first.
}
return(DefC.GetOrder(DefCat.TxPriorities, PIn.Long(x["Priority"].ToString())).CompareTo
(DefC.GetOrder(DefCat.TxPriorities, PIn.Long(y["Priority"].ToString()))));
}
}
//priorities are the same, so sort by toothrange
if (x["ToothRange"].ToString() != y["ToothRange"].ToString())
{
//empty toothranges come before filled toothrange values
return(x["ToothRange"].ToString().CompareTo(y["ToothRange"].ToString()));
}
//toothranges are the same (usually empty), so compare toothnumbers
if (x["ToothNum"].ToString() != y["ToothNum"].ToString())
{
//this also puts invalid or empty toothnumbers before the others.
return(Tooth.ToInt(x["ToothNum"].ToString()).CompareTo(Tooth.ToInt(y["ToothNum"].ToString())));
}
//priority and toothnums are the same, so sort by proccode.
return(x["ProcCode"].ToString().CompareTo(y["ProcCode"].ToString()));
//return 0;//priority, tooth number, and proccode are all the same
}
///<summary>If a substitute exists for the given proc code, then it will give the CodeNum of that code.
///Otherwise, it will return the codeNum for the given procCode.</summary>
public static long GetSubstituteCodeNum(string procCode, string toothNum)
{
//No need to check RemotingRole; no call to db.
long codeNum = 0;
if (string.IsNullOrEmpty(procCode))
{
return(codeNum);
}
ODException.SwallowAnyException(() => {
ProcedureCode procedureCode = _procedureCodeCache.GetOne(procCode);
codeNum = procedureCode.CodeNum;
if (!string.IsNullOrEmpty(procedureCode.SubstitutionCode))
{
//Swallow any following exceptions because the old code would first check and make sure the key was in the dictionary.
ODException.SwallowAnyException(() => {
if (procedureCode.SubstOnlyIf == SubstitutionCondition.Always)
{
codeNum = _procedureCodeCache.GetOne(procedureCode.SubstitutionCode).CodeNum;
}
else if (procedureCode.SubstOnlyIf == SubstitutionCondition.Molar && Tooth.IsMolar(toothNum))
{
codeNum = _procedureCodeCache.GetOne(procedureCode.SubstitutionCode).CodeNum;
}
else if (procedureCode.SubstOnlyIf == SubstitutionCondition.SecondMolar && Tooth.IsSecondMolar(toothNum))
{
codeNum = _procedureCodeCache.GetOne(procedureCode.SubstitutionCode).CodeNum;
}
});
}
});
return(codeNum);
}
///<summary>Helper method so that we do not have to duplicate code. The length of toothValues must match the length of chartOrigVals.</summary>
private static void ProcessScreenChartHelper(long patNum, List <string> toothValues, ScreenChartType chartType, long provNum, long sheetNum
, List <string> chartOrigVals)
{
//No need to check RemotingRole; no call to db.
for (int i = 0; i < toothValues.Count; i++) //toothValues is in the order from low to high tooth number in the chart
{
if (!toothValues[i].Contains("S")) //No sealant, nothing to do.
{
continue;
}
//Logic to determine if the "S" changed surfaces or was erased between the time the toothchart was opened and when it was submitted.
string[] newSurfaces = toothValues[i].Split(',');
string[] origSurfaces = chartOrigVals[i].Split(',');
bool isDiff = false;
for (int j = 0; j < origSurfaces.Length; j++) //Both arrays have the same length unless the chart doesn't exist in the original.
{
if ((newSurfaces[j] == "S" && origSurfaces[j] != "S") || (newSurfaces[j] != "S" && origSurfaces[j] == "S")) //"S" changed surfaces or was removed.
{
isDiff = true;
break;
}
}
//If there is no difference don't make any duplicates. We don't care if they changed a surface from N to PS for example, only S surfaces are important.
if (!isDiff)
{
continue; //All the "S" surfaces are the same.
}
string surf = "";
int toothNum = 0;
bool isMolar = false;
bool isRight = false;
bool isLing = false;
string tooth = "";
#region Parse ScreenChart FieldValues
if (i <= 1) //Top left quadrant of toothchart
{
toothNum = i + 2;
isMolar = true;
isRight = true;
isLing = true;
}
else if (i > 1 && i <= 3) //Top middle-left quadrant of toothchart
{
toothNum = i + 2;
isMolar = false;
isRight = true;
isLing = true;
}
else if (i > 3 && i <= 5) //Top middle-right quadrant of toothchart
{
toothNum = i + 8;
isMolar = false;
isRight = false;
isLing = true;
}
else if (i > 5 && i <= 7) //Top right quadrant of toothchart
{
toothNum = i + 8;
isMolar = true;
isRight = false;
isLing = true;
}
else if (i > 7 && i <= 9) //Lower right quadrant of toothchart
{
toothNum = i + 10;
isMolar = true;
isRight = false;
isLing = false;
}
else if (i > 9 && i <= 11) //Lower middle-right quadrant of toothchart
{
toothNum = i + 10;
isMolar = false;
isRight = false;
isLing = false;
}
else if (i > 11 && i <= 13) //Lower middle-left quadrant of toothchart
{
toothNum = i + 16;
isMolar = false;
isRight = true;
isLing = false;
}
else if (i > 13) //Lower left quadrant of toothchart
{
toothNum = i + 16;
isMolar = true;
isRight = true;
isLing = false;
}
if (isMolar)
{
if (isRight)
{
if (newSurfaces[0] == "S")
{
surf += "D";
}
if (newSurfaces[1] == "S")
{
surf += "M";
}
}
else //Is Left side
{
if (newSurfaces[0] == "S")
{
surf += "M";
}
if (newSurfaces[1] == "S")
{
surf += "D";
}
}
if (isLing && newSurfaces[2] == "S")
{
surf += "L";
}
if (!isLing && newSurfaces[2] == "S")
{
surf += "B";
}
}
else //Front teeth, only look at 3rd surface position in control as that's the only one the user can see.
{
if (newSurfaces[2] == "S")
{
surf = "O"; //NOTE: Not sure what surface to enter here... This is just a placeholder for now until we figure it out...
}
}
if (toothNum != 0)
{
tooth = toothNum.ToString();
}
#endregion Parse Toothchart FieldValues
surf = Tooth.SurfTidyForDisplay(surf, tooth);
if (chartType == ScreenChartType.TP) //Create TP'd sealant procs if they don't already exist for this patient.
{
if (Procedures.GetProcForPatByToothSurfStat(patNum, toothNum, surf, ProcStat.TP) != null)
{
continue;
}
Procedure proc = Procedures.CreateProcForPatNum(patNum, ProcedureCodes.GetCodeNum("D1351"), surf, tooth, ProcStat.TP, provNum);
if (proc != null)
{
SecurityLogs.MakeLogEntry(Permissions.ProcEdit, patNum, "D1351 " + Lans.g("Screens", "treatment planned during screening with tooth")
+ " " + proc.ToothNum.ToString() + " " + Lans.g("Screens", "and surface") + " " + proc.Surf);
}
}
else if (chartType == ScreenChartType.C)
{
Procedure proc = Procedures.GetProcForPatByToothSurfStat(patNum, toothNum, surf, ProcStat.TP);
if (proc == null) //A TP procedure does not already exist.
{
proc = Procedures.CreateProcForPatNum(patNum, ProcedureCodes.GetCodeNum("D1351"), surf, tooth, ProcStat.C, provNum);
}
else //TP proc already exists, set it complete.
{
Procedure procOld = proc.Copy();
proc.ProcStatus = ProcStat.C;
proc.DateEntryC = DateTime.Now;
Procedures.Update(proc, procOld);
}
if (proc != null)
{
SecurityLogs.MakeLogEntry(Permissions.ProcComplCreate, patNum, "D1351 " + Lans.g("Screens", "set complete during screening with tooth")
+ " " + proc.ToothNum.ToString() + " " + Lans.g("Screens", "and surface") + " " + proc.Surf);
}
}
}
if (chartType == ScreenChartType.C)
{
Recalls.Synch(patNum);
}
}
///<summary>Compares two procedures and returns the order they should appear based on status, priority, toothrange, toothnum, then proccode.
///Uses the same logic as the other CompareProcedures but takes Procedure objects instead of DataRows.
///Does not sort Canadian labs correctly. Make sure there are no Canadian labs present prior to comparing.</summary>
public static int CompareProcedures(Procedure x, Procedure y)
{
//We cannot sort Canadian labs within this comparer because there can be multiple labs associated to one procedure.
//This comparer doesn't have enough information in order to sort a procedure and correctly move the corresponding lab(s) with it.
//Therefore, Canadian labs need to be sorted as an additional step after this comparer has been invoked.
//=========================================================================================================================
//if(CultureInfo.CurrentCulture.Name.EndsWith("CA") && x.ProcNumLab!=y.ProcNumLab) {//This code should not impact USA users
// int retVal=CanadianLabSortHelper(x,y);
// if(retVal!=0) {
// return retVal;
// }
//}
//=========================================================================================================================
//first by status
if (x.ProcStatus != y.ProcStatus)
{
//Cn,TP,R,EO,C,EC,D
//EC procs will draw on top of C procs of same date in the 3D tooth chart,
//but this is not a problem since C procs should always have a later date than EC procs.
//EC must come after C so that group notes will come after their procedures in Progress Notes.
int xIdx, yIdx;
List <ProcStat> sortOrder = new List <ProcStat>
{ //The order of statuses in this list is very important and determines the sort order for procedures.
ProcStat.TPi,
ProcStat.Cn,
ProcStat.TP,
ProcStat.R,
ProcStat.EO,
ProcStat.C,
ProcStat.EC,
ProcStat.D
};
xIdx = sortOrder.IndexOf(x.ProcStatus);
yIdx = sortOrder.IndexOf(y.ProcStatus);
return(xIdx.CompareTo(yIdx));
}
//by priority
if (x.Priority != y.Priority) //if priorities are different
{
if (x.Priority == 0)
{
return(1); //x is greater than y. Priorities always come first.
}
if (y.Priority == 0)
{
return(-1); //x is less than y. Priorities always come first.
}
return(Defs.GetOrder(DefCat.TxPriorities, x.Priority).CompareTo(Defs.GetOrder(DefCat.TxPriorities, y.Priority)));
}
//priorities are the same, so sort by toothrange
if (x.ToothRange != y.ToothRange)
{
//empty toothranges come before filled toothrange values
return(x.ToothRange.CompareTo(y.ToothRange));
}
//toothranges are the same (usually empty), so compare toothnumbers
if (x.ToothNum != y.ToothNum)
{
//this also puts invalid or empty toothnumbers before the others.
return(Tooth.ToInt(x.ToothNum).CompareTo(Tooth.ToInt(y.ToothNum)));
}
//priority and toothnums are the same, so sort by proccode.
if (x.CodeNum != y.CodeNum)
{
//GetProcCode(...).ProcCode can be null.
//We do not protect the second call because comparing any string to null doesn't cause an error.
string procCode = ProcedureCodes.GetProcCode(x.CodeNum).ProcCode ?? "";
return(procCode.CompareTo(ProcedureCodes.GetProcCode(y.CodeNum).ProcCode));
}
//if everything else is the same, sort by ProcNum so sort is deterministic
return(x.ProcNum.CompareTo(y.ProcNum));
}
///<summary>The supplied DataRows must include the following columns: ProcStatus(optional),Priority(optional),ToothRange,ToothNum,ProcCode. This sorts procedures based on priority, then tooth number, then procCode. It does not care about dates or status. Currently used in Account module, appointments, and Chart module sorting. TP uses Procedures.ProcedureComparer.</summary>
public static int CompareProcedures(DataRow x, DataRow y)
{
//first, by status
if (x.Table.Columns.Contains("ProcStatus") && y.Table.Columns.Contains("ProcStatus"))
{
if (x["ProcStatus"].ToString() != y["ProcStatus"].ToString())
{
//Cn,TP,R,EO,C,EC,D
//EC procs will draw on top of C procs of same date in the 3D tooth chart,
//but this is not a problem since C procs should always have a later date than EC procs.
//EC must come after C so that group notes will come after their procedures in Progress Notes.
int xIdx = 0;
switch (x["ProcStatus"].ToString())
{
case "8": //TPi
xIdx = 0;
break;
case "7": //Cn
xIdx = 1;
break;
case "1": //TP
xIdx = 2;
break;
case "5": //R
xIdx = 3;
break;
case "4": //EO
xIdx = 4;
break;
case "2": //C
xIdx = 5;
break;
case "3": //EC
xIdx = 6;
break;
case "6": //D
xIdx = 7;
break;
}
int yIdx = 0;
switch (y["ProcStatus"].ToString())
{
case "8": //TPi
yIdx = 0;
break;
case "7": //Cn
yIdx = 1;
break;
case "1": //TP
yIdx = 2;
break;
case "5": //R
yIdx = 3;
break;
case "4": //EO
yIdx = 4;
break;
case "2": //C
yIdx = 5;
break;
case "3": //EC
yIdx = 6;
break;
case "6": //D
yIdx = 7;
break;
}
return(xIdx.CompareTo(yIdx));
}
}
//by priority
if (x.Table.Columns.Contains("Priority") && y.Table.Columns.Contains("Priority"))
{
if (x["Priority"].ToString() != y["Priority"].ToString()) //if priorities are different
{
if (x["Priority"].ToString() == "0")
{
return(1); //x is greater than y. Priorities always come first.
}
if (y["Priority"].ToString() == "0")
{
return(-1); //x is less than y. Priorities always come first.
}
return(Defs.GetOrder(DefCat.TxPriorities, PIn.Long(x["Priority"].ToString())).CompareTo
(Defs.GetOrder(DefCat.TxPriorities, PIn.Long(y["Priority"].ToString()))));
}
}
//priorities are the same, so sort by toothrange
if (x["ToothRange"].ToString() != y["ToothRange"].ToString())
{
//empty toothranges come before filled toothrange values
return(x["ToothRange"].ToString().CompareTo(y["ToothRange"].ToString()));
}
//toothranges are the same (usually empty), so compare toothnumbers
if (x["ToothNum"].ToString() != y["ToothNum"].ToString())
{
//this also puts invalid or empty toothnumbers before the others.
return(Tooth.ToInt(x["ToothNum"].ToString()).CompareTo(Tooth.ToInt(y["ToothNum"].ToString())));
}
if (x["ProcCode"].ToString() != y["ProcCode"].ToString())
{
//priority and toothnums are the same, so sort by proccode if different.
return(x["ProcCode"].ToString().CompareTo(y["ProcCode"].ToString()));
}
//priority, tooth number, and proccode are all the same. Sort by ProcNum so we have a determinate order if everything else is the same.
return(x["ProcNum"].ToString().CompareTo(y["ProcNum"].ToString()));
}
///<summary>A generic comparison that puts primary teeth after perm teeth.</summary>
public int Compare(string toothA, string toothB)
{
return(Tooth.ToOrdinal(toothA).CompareTo(Tooth.ToOrdinal(toothB)));
}
private static DataTable GetProgNotes(int patNum, bool isAuditMode)
{
DataConnection dcon = new DataConnection();
DataTable table = new DataTable("ProgNotes");
DataRow row;
//columns that start with lowercase are altered for display rather than being raw data.
table.Columns.Add("ADACode");
table.Columns.Add("aptDateTime", typeof(DateTime));
table.Columns.Add("colorBackG");
table.Columns.Add("colorText");
table.Columns.Add("CommlogNum");
table.Columns.Add("description");
table.Columns.Add("dx");
table.Columns.Add("Dx");
table.Columns.Add("note");
table.Columns.Add("Priority");
table.Columns.Add("procDate");
table.Columns.Add("ProcDate", typeof(DateTime));
table.Columns.Add("procFee");
table.Columns.Add("ProcNum");
table.Columns.Add("ProcNumLab");
table.Columns.Add("procStatus");
table.Columns.Add("ProcStatus");
table.Columns.Add("prov");
table.Columns.Add("RxNum");
table.Columns.Add("signature");
table.Columns.Add("Surf");
table.Columns.Add("toothNum");
table.Columns.Add("ToothNum");
table.Columns.Add("ToothRange");
table.Columns.Add("user");
//table.Columns.Add("");
//but we won't actually fill this table with rows until the very end. It's more useful to use a List<> for now.
List <DataRow> rows = new List <DataRow>();
//Procedures-----------------------------------------------------------------------------------------------------
string command = "SELECT ProcDate,ProcStatus,ToothNum,Surf,Dx,procedurelog.ADACode,ProcNum,procedurecode.Descript,"
+ "provider.Abbr,ProcFee,ProcNumLab,appointment.AptDateTime,Priority,ToothRange "
+ "FROM procedurelog "
+ "LEFT JOIN procedurecode ON procedurecode.ADACode=procedurelog.ADACode "
+ "LEFT JOIN provider ON provider.ProvNum=procedurelog.ProvNum "
+ "LEFT JOIN appointment ON appointment.AptNum=procedurelog.AptNum "
+ "AND (appointment.AptStatus=" + POut.PInt((int)ApptStatus.Scheduled)
+ " OR appointment.AptStatus=" + POut.PInt((int)ApptStatus.ASAP)
+ " OR appointment.AptStatus=" + POut.PInt((int)ApptStatus.Broken)
+ " OR appointment.AptStatus=" + POut.PInt((int)ApptStatus.Complete)
+ ") WHERE procedurelog.PatNum=" + POut.PInt(patNum);
if (!isAuditMode)
{
command += " AND ProcStatus !=6"; //don't include deleted
}
command += " ORDER BY ProcDate"; //we'll just have to reorder it anyway
DataTable rawProcs = dcon.GetTable(command);
command = "SELECT ProcNum,EntryDateTime,UserNum,Note,"
+ "CASE WHEN Signature!='' THEN 1 ELSE 0 END AS SigPresent "
+ "FROM procnote WHERE PatNum=" + POut.PInt(patNum)
+ " ORDER BY EntryDateTime"; // but this helps when looping for notes
DataTable rawNotes = dcon.GetTable(command);
DateTime dateT;
List <DataRow> labRows = new List <DataRow>(); //Canadian lab procs, which must be added in a loop at the very end.
for (int i = 0; i < rawProcs.Rows.Count; i++)
{
row = table.NewRow();
row["ADACode"] = rawProcs.Rows[i]["ADACode"].ToString();
row["aptDateTime"] = PIn.PDateT(rawProcs.Rows[i]["AptDateTime"].ToString());
row["colorBackG"] = Color.White.ToArgb();
if (((DateTime)row["aptDateTime"]).Date == DateTime.Today)
{
row["colorBackG"] = DefB.Long[(int)DefCat.MiscColors][6].ItemColor.ToArgb().ToString();
}
switch ((ProcStat)PIn.PInt(rawProcs.Rows[i]["ProcStatus"].ToString()))
{
case ProcStat.TP:
row["colorText"] = DefB.Long[(int)DefCat.ProgNoteColors][0].ItemColor.ToArgb().ToString();
break;
case ProcStat.C:
row["colorText"] = DefB.Long[(int)DefCat.ProgNoteColors][1].ItemColor.ToArgb().ToString();
break;
case ProcStat.EC:
row["colorText"] = DefB.Long[(int)DefCat.ProgNoteColors][2].ItemColor.ToArgb().ToString();
break;
case ProcStat.EO:
row["colorText"] = DefB.Long[(int)DefCat.ProgNoteColors][3].ItemColor.ToArgb().ToString();
break;
case ProcStat.R:
row["colorText"] = DefB.Long[(int)DefCat.ProgNoteColors][4].ItemColor.ToArgb().ToString();
break;
case ProcStat.D:
row["colorText"] = Color.Black.ToArgb().ToString();
break;
}
row["CommlogNum"] = 0;
row["description"] = rawProcs.Rows[i]["Descript"].ToString();
row["dx"] = DefB.GetValue(DefCat.Diagnosis, PIn.PInt(rawProcs.Rows[i]["Dx"].ToString()));
row["Dx"] = rawProcs.Rows[i]["Dx"].ToString();
//note-----------------------------------------------------------------------------------------------------------
if (isAuditMode) //we will include all notes for each proc. We will concat and make readable.
{
for (int n = 0; n < rawNotes.Rows.Count; n++) //loop through each note
{
if (rawProcs.Rows[i]["ProcNum"].ToString() != rawNotes.Rows[n]["ProcNum"].ToString())
{
continue;
}
if (row["Note"].ToString() != "") //if there is an existing note
{
row["note"] += "\r\n------------------------------------------------------\r\n"; //start a new line
}
row["note"] += PIn.PDateT(rawNotes.Rows[n]["EntryDateTime"].ToString()).ToString();
row["note"] += " " + UserodB.GetName(PIn.PInt(rawNotes.Rows[n]["UserNum"].ToString()));
if (rawNotes.Rows[n]["SigPresent"].ToString() == "1")
{
row["note"] += " " + Lan.g("ChartModule", "(signed)");
}
row["note"] += "\r\n" + rawNotes.Rows[n]["Note"].ToString();
}
}
else //we just want the most recent note
{
for (int n = rawNotes.Rows.Count - 1; n >= 0; n--) //loop through each note, backwards.
{
if (rawProcs.Rows[i]["ProcNum"].ToString() != rawNotes.Rows[n]["ProcNum"].ToString())
{
continue;
}
row["user"] = UserodB.GetName(PIn.PInt(rawNotes.Rows[n]["UserNum"].ToString()));
row["note"] = rawNotes.Rows[n]["Note"].ToString();
if (rawNotes.Rows[n]["SigPresent"].ToString() == "1")
{
row["signature"] = Lan.g("ChartModule", "Signed");
}
else
{
row["signature"] = "";
}
break; //out of note loop.
}
}
row["Priority"] = rawProcs.Rows[i]["Priority"].ToString();
dateT = PIn.PDateT(rawProcs.Rows[i]["ProcDate"].ToString());
if (dateT.Year < 1880)
{
row["procDate"] = "";
}
else
{
row["procDate"] = dateT.ToShortDateString();
}
row["ProcDate"] = dateT;
row["procFee"] = PIn.PDouble(rawProcs.Rows[i]["ProcFee"].ToString()).ToString("F");
row["ProcNum"] = rawProcs.Rows[i]["ProcNum"].ToString();
row["ProcNumLab"] = rawProcs.Rows[i]["ProcNumLab"].ToString();
row["procStatus"] = Lan.g("enumProcStat", ((ProcStat)PIn.PInt(rawProcs.Rows[i]["ProcStatus"].ToString())).ToString());
row["ProcStatus"] = rawProcs.Rows[i]["ProcStatus"].ToString();
row["prov"] = rawProcs.Rows[i]["Abbr"].ToString();
row["RxNum"] = 0;
row["Surf"] = rawProcs.Rows[i]["Surf"].ToString();
row["toothNum"] = Tooth.ToInternat(rawProcs.Rows[i]["ToothNum"].ToString());
row["ToothNum"] = rawProcs.Rows[i]["ToothNum"].ToString();
row["ToothRange"] = rawProcs.Rows[i]["ToothRange"].ToString();
if (rawProcs.Rows[i]["ProcNumLab"].ToString() == "0") //normal proc
{
rows.Add(row);
}
else
{
row["description"] = "-----" + row["description"].ToString();
labRows.Add(row); //these will be added in the loop at the end
}
}
//Commlog-----------------------------------------------------------------------------------------------------------
command = "SELECT CommlogNum,CommDateTime,CommType,Note FROM commlog WHERE PatNum=" + POut.PInt(patNum)
+ " ORDER BY CommDateTime";
DataTable rawComm = dcon.GetTable(command);
for (int i = 0; i < rawComm.Rows.Count; i++)
{
row = table.NewRow();
row["colorBackG"] = Color.White.ToArgb();
row["colorText"] = DefB.Long[(int)DefCat.ProgNoteColors][6].ItemColor.ToArgb().ToString();
row["CommlogNum"] = rawComm.Rows[i]["CommlogNum"].ToString();
row["description"] = Lan.g("ChartModule", "Comm - ")
+ Lan.g("enumCommItemType", ((CommItemType)PIn.PInt(rawComm.Rows[i]["CommType"].ToString())).ToString());
row["note"] = rawComm.Rows[i]["Note"].ToString();
dateT = PIn.PDateT(rawComm.Rows[i]["CommDateTime"].ToString());
if (dateT.Year < 1880)
{
row["procDate"] = "";
}
else
{
row["procDate"] = dateT.ToShortDateString();
}
row["ProcDate"] = dateT;
row["ProcNum"] = 0;
row["RxNum"] = 0;
rows.Add(row);
}
//Rx------------------------------------------------------------------------------------------------------------------
command = "SELECT RxNum,RxDate,Drug,Disp,ProvNum,Notes FROM rxpat WHERE PatNum=" + POut.PInt(patNum)
+ " ORDER BY RxDate";
DataTable rawRx = dcon.GetTable(command);
for (int i = 0; i < rawRx.Rows.Count; i++)
{
row = table.NewRow();
row["colorBackG"] = Color.White.ToArgb();
row["colorText"] = DefB.Long[(int)DefCat.ProgNoteColors][5].ItemColor.ToArgb().ToString();
row["CommlogNum"] = 0;
row["description"] = Lan.g("ChartModule", "Rx - ") + rawRx.Rows[i]["Drug"].ToString() + " - #" + rawRx.Rows[i]["Disp"].ToString();
row["note"] = rawRx.Rows[i]["Notes"].ToString();
dateT = PIn.PDate(rawRx.Rows[i]["RxDate"].ToString());
if (dateT.Year < 1880)
{
row["procDate"] = "";
}
else
{
row["procDate"] = dateT.ToShortDateString();
}
row["ProcDate"] = dateT;
row["ProcNum"] = 0;
row["RxNum"] = rawRx.Rows[i]["RxNum"].ToString();
rows.Add(row);
}
//Sorting
rows.Sort(CompareChartRows);
//Canadian lab procedures need to come immediately after their corresponding proc---------------------------------
for (int i = 0; i < labRows.Count; i++)
{
for (int r = 0; r < rows.Count; r++)
{
if (rows[r]["ProcNum"].ToString() == labRows[i]["ProcNumLab"].ToString())
{
rows.Insert(r + 1, labRows[i]);
break;
}
}
}
for (int i = 0; i < rows.Count; i++)
{
table.Rows.Add(rows[i]);
}
return(table);
}