/// <summary>
/// Create a new SessionBase object from the given IOThread, socket, and Address.
/// </summary>
/// <param name="ioThread">the IOThread for this session to run on</param>
/// <param name="connect">this flag dictates whether to connect</param>
/// <param name="socket">the socket to contain</param>
/// <param name="options">Options that dictate the settings of this session</param>
/// <param name="addr">an Address that dictates the protocol and IP-address to use when connecting</param>
public SessionBase([NotNull] IOThread ioThread, bool connect, [NotNull] SocketBase socket, [NotNull] Options options, [NotNull] Address addr)
: base(ioThread, options)
{
m_ioObject = new IOObject(ioThread);
m_connect = connect;
m_socket = socket;
m_ioThread = ioThread;
m_addr = addr;
if (options.RawSocket)
{
m_identitySent = true;
m_identityReceived = true;
}
m_terminatingPipes = new HashSet<Pipe>();
}
/// <summary>
/// Connect this socket to the given address.
/// </summary>
/// <param name="addr">a string denoting the endpoint to connect to</param>
/// <exception cref="AddressAlreadyInUseException">The specified address is already in use.</exception>
/// <exception cref="NetMQException">No IO thread was found.</exception>
/// <exception cref="ProtocolNotSupportedException">the specified protocol is not supported</exception>
/// <exception cref="ProtocolNotSupportedException">the socket type and protocol do not match</exception>
/// <exception cref="TerminatingException">The socket has been stopped.</exception>
/// <remarks>
/// The supported protocols are "inproc", "ipc", "tcp", "pgm", and "epgm".
/// If the protocol is either "pgm" or "epgm", then this socket must be of type Pub, Sub, XPub, or XSub.
/// </remarks>
/// <exception cref="EndpointNotFoundException">The given address was not found in the list of endpoints.</exception>
public void Connect([NotNull] string addr)
{
CheckContextTerminated();
// Process pending commands, if any.
ProcessCommands(0, false);
string address;
string protocol;
DecodeAddress(addr, out address, out protocol);
CheckProtocol(protocol);
if (protocol == Address.InProcProtocol)
{
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer endpoint.
Ctx.Endpoint peer = FindEndpoint(addr);
// The total HWM for an inproc connection should be the sum of
// the binder's HWM and the connector's HWM.
var sndhwm = m_options.SendHighWatermark != 0 && peer.Options.ReceiveHighWatermark != 0
? m_options.SendHighWatermark + peer.Options.ReceiveHighWatermark
: 0;
var rcvhwm = m_options.ReceiveHighWatermark != 0 && peer.Options.SendHighWatermark != 0
? m_options.ReceiveHighWatermark + peer.Options.SendHighWatermark
: 0;
// The total LWM for an inproc connection should be the sum of
// the binder's LWM and the connector's LWM.
int sndlwm = m_options.SendLowWatermark != 0 && peer.Options.ReceiveLowWatermark != 0
? m_options.SendLowWatermark + peer.Options.ReceiveLowWatermark
: 0;
int rcvlwm = m_options.ReceiveLowWatermark != 0 && peer.Options.SendLowWatermark != 0
? m_options.ReceiveLowWatermark + peer.Options.SendLowWatermark
: 0;
// Create a bi-directional pipe to connect the peers.
ZObject[] parents = { this, peer.Socket };
int[] highWaterMarks = { sndhwm, rcvhwm };
int[] lowWaterMarks = { sndlwm, rcvlwm };
bool[] delays = { m_options.DelayOnDisconnect, m_options.DelayOnClose };
Pipe[] pipes = Pipe.PipePair(parents, highWaterMarks, lowWaterMarks, delays);
// Attach local end of the pipe to this socket object.
AttachPipe(pipes[0]);
// If required, send the identity of the local socket to the peer.
if (peer.Options.RecvIdentity)
{
var id = new Msg();
id.InitPool(m_options.IdentitySize);
id.Put(m_options.Identity, 0, m_options.IdentitySize);
id.SetFlags(MsgFlags.Identity);
bool written = pipes[0].Write(ref id);
Debug.Assert(written);
pipes[0].Flush();
}
// If required, send the identity of the peer to the local socket.
if (m_options.RecvIdentity)
{
var id = new Msg();
id.InitPool(peer.Options.IdentitySize);
id.Put(peer.Options.Identity, 0, peer.Options.IdentitySize);
id.SetFlags(MsgFlags.Identity);
bool written = pipes[1].Write(ref id);
Debug.Assert(written);
pipes[1].Flush();
}
// Attach remote end of the pipe to the peer socket. Note that peer's
// seqnum was incremented in find_endpoint function. We don't need it
// increased here.
SendBind(peer.Socket, pipes[1], false);
// Save last endpoint URI
m_options.LastEndpoint = addr;
// remember inproc connections for disconnect
m_inprocs.Add(addr, pipes[0]);
return;
}
// Choose the I/O thread to run the session in.
var ioThread = ChooseIOThread(m_options.Affinity);
if (ioThread == null)
throw NetMQException.Create(ErrorCode.EmptyThread);
var paddr = new Address(protocol, address);
// Resolve address (if needed by the protocol)
switch (protocol)
{
case Address.TcpProtocol:
{
paddr.Resolved = (new TcpAddress());
paddr.Resolved.Resolve(address, m_options.IPv4Only);
break;
}
case Address.IpcProtocol:
{
paddr.Resolved = (new IpcAddress());
paddr.Resolved.Resolve(address, true);
break;
}
case Address.PgmProtocol:
case Address.EpgmProtocol:
{
if (m_options.SocketType == ZmqSocketType.Sub || m_options.SocketType == ZmqSocketType.Xsub)
{
Bind(addr);
return;
}
paddr.Resolved = new PgmAddress();
paddr.Resolved.Resolve(address, m_options.IPv4Only);
break;
}
}
// Create session.
SessionBase session = SessionBase.Create(ioThread, true, this, m_options, paddr);
Debug.Assert(session != null);
// PGM does not support subscription forwarding; ask for all data to be
// sent to this pipe.
bool icanhasall = protocol == Address.PgmProtocol || protocol == Address.EpgmProtocol;
Pipe newPipe = null;
if (!m_options.DelayAttachOnConnect || icanhasall)
{
// Create a bi-directional pipe.
ZObject[] parents = { this, session };
int[] hwms = { m_options.SendHighWatermark, m_options.ReceiveHighWatermark };
int[] lwms = { m_options.SendLowWatermark, m_options.ReceiveLowWatermark };
bool[] delays = { m_options.DelayOnDisconnect, m_options.DelayOnClose };
Pipe[] pipes = Pipe.PipePair(parents, hwms, lwms, delays);
// Attach local end of the pipe to the socket object.
AttachPipe(pipes[0], icanhasall);
newPipe = pipes[0];
// Attach remote end of the pipe to the session object later on.
session.AttachPipe(pipes[1]);
}
// Save last endpoint URI
m_options.LastEndpoint = paddr.ToString();
AddEndpoint(addr, session, newPipe);
}
/// <summary>
/// Create a return a new session.
/// The specific subclass of SessionBase that is created is dictated by the SocketType specified by the options argument.
/// </summary>
/// <param name="ioThread">the <c>IOThread</c> for this session to run in</param>
/// <param name="connect">whether to immediately connect</param>
/// <param name="socket">the socket to connect</param>
/// <param name="options">an <c>Options</c> that provides the SocketType that dictates which type of session to create</param>
/// <param name="addr">an <c>Address</c> object that specifies the protocol and address to connect to</param>
/// <returns>the newly-created instance of whichever subclass of SessionBase is specified by the options</returns>
/// <exception cref="InvalidException">The socket must be of the correct type.</exception>
public static SessionBase Create( IOThread ioThread, bool connect, SocketBase socket, Options options, Address addr)
{
switch (options.SocketType)
{
case ZmqSocketType.Req:
return new Req.ReqSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Dealer:
return new Dealer.DealerSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Rep:
return new Rep.RepSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Router:
return new Router.RouterSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Pub:
return new Pub.PubSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Xpub:
return new XPub.XPubSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Sub:
return new Sub.SubSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Xsub:
return new XSub.XSubSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Push:
return new Push.PushSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Pull:
return new Pull.PullSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Pair:
return new Pair.PairSession(ioThread, connect, socket, options, addr);
case ZmqSocketType.Stream:
return new Stream.StreamSession(ioThread, connect, socket, options, addr);
default:
throw new InvalidException("SessionBase.Create called with invalid SocketType of " + options.SocketType);
}
}
