public static void Draw(DxfModel dxf, DLocation DLocation)
{
Point3D v1 = new Point3D(DLocation.X - 0.5d, DLocation.Y - 1.0d, DLocation.Z);
Point3D v2 = new Point3D(DLocation.X + 0.5d, DLocation.Y + 1.0d, DLocation.Z);
DxfLine DxfLine12 = new DxfLine(v1, v2);
dxf.Entities.Add(DxfLine12);
}
public static void Draw(DxfModel dxf, DLocation DLocation)
{
Point3D v1 = new Point3D(DLocation.X - 2.0d, DLocation.Y + 4.0d, DLocation.Z);
Point3D v2 = new Point3D(DLocation.X + 2.0d, DLocation.Y + 4.0d, DLocation.Z);
Point3D v0=new Point3D(DLocation.X,DLocation.Y,DLocation.Z);
DxfLine DxfLine10 = new DxfLine(v0, v1);
dxf.Entities.Add(DxfLine10);
DxfLine DxfLine20 = new DxfLine(v0, v2);
dxf.Entities.Add(DxfLine20);
}
public static void Draw(DxfModel dxf, DLocation DLocation,List<string> configurations)
{
Point3D confStrPoint3D = new Point3D(DLocation.X + 5.0d, DLocation.Y - 5.0d, DLocation.Z);
DxfText DxfText1 = new DxfText("CONFIGURATION: NOTE: Assembly drawing for overall dimesions, actual door size and handle position may vary",
confStrPoint3D, 2.0d);
//DxfText1.Layer.Color.Index = 8;
dxf.Entities.Add(DxfText1);
for (int i = 0; i < configurations.Count(); i++)
{
Point3D confPoint3D = new Point3D(DLocation.X+10.0d, DLocation.Y - 5.0d * (i + 2), DLocation.Z);
DxfText DxfText = new DxfText(configurations[i], confPoint3D, 2.0d);
dxf.Entities.Add(DxfText);
}
}
/// <summary>
/// 风向绘制
/// </summary>
/// <param name="dxf"></param>
/// <param name="DLocation"></param>
/// <param name="isRight"></param>
public static void Draw(DxfModel dxf, DLocation DLocation, bool isRight)
{
double factor = 0.5f;
Point3D v1 = new Point3D();
Point3D v2 = new Point3D();
Point3D v3 = new Point3D();
Point3D v4 = new Point3D();
Point3D v5 = new Point3D();
Point3D v6 = new Point3D();
Point3D v7 = new Point3D();
if (isRight)
{
v1 = new Point3D(10*factor + DLocation.X, DLocation.Y, DLocation.Z);
v2 = new Point3D(DLocation.X, DLocation.Y + 10 * factor, DLocation.Z);
v3 = new Point3D(DLocation.X + 10 * factor, DLocation.Y + 10 * factor, DLocation.Z);
v4 = new Point3D(DLocation.X + 20 * factor, DLocation.Y + 15 * factor, DLocation.Z);
v5 = new Point3D(DLocation.X, DLocation.Y + 20 * factor, DLocation.Z);
v6 = new Point3D(DLocation.X + 10 * factor, DLocation.Y + 20 * factor, DLocation.Z);
v7 = new Point3D(DLocation.X + 10 * factor, DLocation.Y + 30 * factor, DLocation.Z);
}
else
{
v1 = new Point3D(10 * factor + DLocation.X, DLocation.Y, DLocation.Z);
v2 = new Point3D(DLocation.X + 20 * factor, DLocation.Y + 10 * factor, DLocation.Z);
v3 = new Point3D(DLocation.X + 10 * factor, DLocation.Y + 10 * factor, DLocation.Z);
v4 = new Point3D(DLocation.X, DLocation.Y + 15 * factor, DLocation.Z);
v5 = new Point3D(DLocation.X + 20 * factor, DLocation.Y + 20 * factor, DLocation.Z);
v6 = new Point3D(DLocation.X + 10 * factor, DLocation.Y + 20 * factor, DLocation.Z);
v7 = new Point3D(DLocation.X + 10 * factor, DLocation.Y + 30 * factor, DLocation.Z);
}
DxfLine DxfLine23 = new DxfLine(v2, v3);
dxf.Entities.Add(DxfLine23);
DxfLine DxfLine56 = new DxfLine(v5, v6);
dxf.Entities.Add(DxfLine56);
DxfLine DxfLine14 = new DxfLine(v1, v4);
dxf.Entities.Add(DxfLine14);
DxfLine DxfLine74 = new DxfLine(v7, v4);
dxf.Entities.Add(DxfLine74);
DxfLine DxfLine25 = new DxfLine(v2, v5);
dxf.Entities.Add(DxfLine25);
DxfLine DxfLine71 = new DxfLine(v7, v1);
dxf.Entities.Add(DxfLine71);
}
//画标注
public static void writeDimension(DxfModel doc,DLocation firstDLocation,DLocation secondDLocation,double DxfTextHeight,double DxfTextWidth,double dimensionHeight,string dimensionDirection)
{
DxfDimension.Aligned dimension = new DxfDimension.Aligned(doc.DefaultDimensionStyle);
dimension.ExtensionLine1StartPoint = new Point3D(firstDLocation.X, firstDLocation.Y, firstDLocation.Z);
dimension.ExtensionLine2StartPoint = new Point3D(secondDLocation.X, secondDLocation.Y, secondDLocation.Z);
if (dimensionDirection.Equals("top"))
dimension.DimensionLineLocation = new Point3D((firstDLocation.X + secondDLocation.X) / 2, firstDLocation.Y + dimensionHeight, firstDLocation.Z);
else if (dimensionDirection.Equals("bottom"))
dimension.DimensionLineLocation = new Point3D((firstDLocation.X + secondDLocation.X) / 2, firstDLocation.Y - dimensionHeight, firstDLocation.Z);
else if (dimensionDirection.Equals("left"))
dimension.DimensionLineLocation = new Point3D(firstDLocation.X - dimensionHeight, (firstDLocation.Y + secondDLocation.Y) / 2, firstDLocation.Z);
else if (dimensionDirection.Equals("right"))
dimension.DimensionLineLocation = new Point3D(firstDLocation.X + dimensionHeight, (firstDLocation.Y + secondDLocation.Y) / 2, firstDLocation.Z);
dimension.DimensionStyleOverrides.TextHeight = 1d;
dimension.DimensionStyleOverrides.ArrowSize = 1d;
dimension.Text = getDimensionText(dimension);
doc.Entities.Add(dimension);
}
//画单门，包括下栅栏，包括2个左门闩，2个右把手
public static void writeBottoFanSingleDoor(DxfModel dxf, DLocation DLocation, string[] DxfText, double height, double width, double outer_mid_space, double outer_in_space, double barHeight, double barWidth, string upOrDownLayer)
{
//画两个门闩
writeDoorBarRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
double downLeftX=DLocation.X+outer_mid_space-barWidth/2+(outer_in_space-outer_mid_space)/2;
double downLeftY=DLocation.Y + height / 4;
writeRepresentDoorBarRectangle(dxf, new DLocation(downLeftX,downLeftY , DLocation.Z), DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
double upLeftX = downLeftX;
double upLeftY = DLocation.Y + 3 * height / 4 - barHeight;
writeRepresentDoorBarRectangle(dxf, new DLocation(upLeftX,upLeftY , DLocation.Z), DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
//画门把手
Handle.Draw(dxf, new DLocation(DLocation.X + 3 * width / 4, DLocation.Y + 3 * height / 4 - barHeight, DLocation.Z));
Handle.Draw(dxf, new DLocation(DLocation.X + 3 * width / 4, DLocation.Y + height / 4, DLocation.Z));
//画门把手
Handle.Draw(dxf, new DLocation(DLocation.X + 3 * width / 4, DLocation.Y + 3 * height / 4 - barHeight, DLocation.Z));
Handle.Draw(dxf, new DLocation(DLocation.X + 3 * width / 4, DLocation.Y + height / 4, DLocation.Z));
//下面位置栅栏
Fan.Draw(dxf, new Point3D(DLocation.X + width / 6, DLocation.Y + height / 7, DLocation.Z), new Point3D(DLocation.X + width * 4 / 5, DLocation.Y + height / 7, DLocation.Z), 0);
}
/// <summary>
/// 绘制垂直风向箭头
/// </summary>
/// <param name="dxf"></param>
/// <param name="DLocation"></param>
public static void DrawVerticalWind(DxfModel dxf,DLocation DLocation)
{
double factor = 0.5f;
Point3D v1 = new Point3D();
Point3D v2 = new Point3D();
Point3D v3 = new Point3D();
Point3D v4 = new Point3D();
Point3D v5 = new Point3D();
Point3D v6 = new Point3D();
Point3D v7 = new Point3D();
v1 = new Point3D(DLocation.X, DLocation.Y, DLocation.Z);
v2 = new Point3D(DLocation.X+10*factor, DLocation.Y, DLocation.Z);
v3 = new Point3D(DLocation.X - 10 * factor, DLocation.Y + 10 * factor, DLocation.Z);
v4 = new Point3D(DLocation.X, DLocation.Y + 10 * factor, DLocation.Z);
v5 = new Point3D(DLocation.X+10*factor, DLocation.Y + 10* factor, DLocation.Z);
v6 = new Point3D(DLocation.X + 20 * factor, DLocation.Y + 10 * factor, DLocation.Z);
v7 = new Point3D(DLocation.X +5 * factor, DLocation.Y + 20 * factor, DLocation.Z);
DxfLine DxfLine23 = new DxfLine(v1, v2);
dxf.Entities.Add(DxfLine23);
DxfLine DxfLine56 = new DxfLine(v3, v6);
dxf.Entities.Add(DxfLine56);
DxfLine DxfLine14 = new DxfLine(v1, v4);
dxf.Entities.Add(DxfLine14);
DxfLine DxfLine74 = new DxfLine(v2, v5);
dxf.Entities.Add(DxfLine74);
DxfLine DxfLine25 = new DxfLine(v3, v7);
dxf.Entities.Add(DxfLine25);
DxfLine DxfLine71 = new DxfLine(v6, v7);
dxf.Entities.Add(DxfLine71);
}
/// <summary>
/// 获取entity右下角坐标(已经计算好的，实体组件计算）
/// </summary>
/// <param name="pList"></param>
/// <param name="relativeStartLocation"></param>
/// <returns></returns>
public static DLocation getNextStartLocation(List<Point3D> pList)
{
double minY = Double.MaxValue;
double minX = Double.MinValue;
DLocation nextStartLocation=new DLocation();
for (int i = 0; i < pList.Count;i++ )
{
if(minY>=pList[i].Y){
minY = pList[i].Y;
if (minX <= pList[i].X)
{
minX = pList[i].X;
nextStartLocation.X = pList[i].X;
nextStartLocation.Y = pList[i].Y;
nextStartLocation.Z = pList[i].Z;
}
}
}
return nextStartLocation;
}
/// <summary>
/// 计算最后一个元素右上角坐标
/// </summary>
/// <param name="pList"></param>
/// <returns></returns>
public static DLocation getRightTopLocation(List<Point3D> pList)
{
double minY = Double.MinValue;
double minX = Double.MinValue;
DLocation rightTopLocation = new DLocation();
for (int i = 0; i < pList.Count; i++)
{
if (minY <= pList[i].Y)
{
minY = pList[i].Y;
if (minX <= pList[i].X)
{
minX = pList[i].X;
rightTopLocation.X = pList[i].X;
rightTopLocation.Y = pList[i].Y;
rightTopLocation.Z = pList[i].Z;
}
}
}
return rightTopLocation;
}
/// <summary>
/// 获得Frame的左下角坐标
/// </summary>
/// <param name="sourceModel"></param>
/// <returns></returns>
public static DLocation getFrameLeftDownLocation(DxfModel sourceModel)
{
DLocation dLocation = new DLocation(0, 0, 0);
foreach(DxfEntity entity in sourceModel.Entities)
{
if (entity.EntityType.Equals("LWPOLYLINE"))
{
DxfLwPolyline dxfLwPolyline=(DxfLwPolyline)entity;
DxfLwPolyline.VertexCollection vc = dxfLwPolyline.Vertices;
for (int i = 0; i < vc.Count;i++ )
{
if (i == 0)
{
dLocation.X = vc[i].Position.X;
dLocation.Y = vc[i].Position.Y;
}
if(dLocation.X>=vc[i].Position.X&&dLocation.Y>=vc[i].Position.Y){
dLocation.X = vc[i].Position.X;
dLocation.Y = vc[i].Position.Y;
}
}
break;
}
}
return dLocation;
}
/// <summary>
/// 获得最大的X坐标是为了做标注使用
/// </summary>
/// <param name="pList"></param>
/// <returns></returns>
public static DLocation getLargestXLocation(List<Point3D> pList)
{
double minX = Double.MinValue;
DLocation largeLocation = new DLocation();
for (int i = 0; i < pList.Count; i++)
{
if (minX <= pList[i].X)
{
minX = pList[i].X;
largeLocation.X = pList[i].X;
largeLocation.Y = pList[i].Y;
largeLocation.Z = pList[i].Z;
}
}
return largeLocation;
}
/// <summary>
/// 单门有两门闩，和俩个把手的
/// </summary>
/// <param name="doc"></param>
/// <param name="DLocation"></param>
/// <param name="DxfText"></param>
/// <param name="height"></param>
/// <param name="width"></param>
/// <param name="outer_mid_space"></param>
/// <param name="outer_in_space"></param>
/// <param name="barHeight"></param>
/// <param name="barWidth"></param>
public static void writeWholeSingleTwoBarAndTwoCirle(DxfModel doc, DLocation DLocation, string[] DxfText, double height, double width, double outer_mid_space, double outer_in_space,double barHeight,double barWidth)
{
DxfLine outerLeftDxfLine = new DxfLine(new Point3D(DLocation.X + width / 2 - width / 14, DLocation.Y + outer_mid_space, DLocation.Z), new Point3D(DLocation.X + width / 2 - width / 14, DLocation.Y + height - outer_mid_space, DLocation.Z));
DxfLine inLeftDxfLine = new DxfLine(new Point3D(DLocation.X + width / 2 - width / 14 + 0.5f, DLocation.Y + outer_in_space, DLocation.Z), new Point3D(DLocation.X + width / 2 - width / 14 + 0.5f, DLocation.Y + height - outer_in_space, DLocation.Z));
DxfLine inDownRightDxfLine = new DxfLine(new Point3D(DLocation.X + width / 2 + width / 14, DLocation.Y + outer_in_space, DLocation.Z), new Point3D(DLocation.X + width / 2 + width / 14, DLocation.Y + height / 4, DLocation.Z));
DxfLine inMidRightDxfLine = new DxfLine(new Point3D(DLocation.X + width / 2 + width / 14, DLocation.Y + height / 4 + barHeight, DLocation.Z), new Point3D(DLocation.X + width / 2 + width / 14, DLocation.Y + 3 * height / 4 - barHeight, DLocation.Z));
DxfLine inUpRightDxfLine = new DxfLine(new Point3D(DLocation.X + width / 2 + width / 14, DLocation.Y + 3 * height / 4, DLocation.Z), new Point3D(DLocation.X + width / 2 + width / 14, DLocation.Y + height - outer_in_space, DLocation.Z));
DxfLine outerDownRightDxfLine = new DxfLine(new Point3D(DLocation.X + width / 2 + width / 14 + 0.5f, DLocation.Y + outer_mid_space, DLocation.Z), new Point3D(DLocation.X + width / 2 + width / 14 + 0.5f, DLocation.Y + height / 4, DLocation.Z));
DxfLine outerMidRightDxfLine = new DxfLine(new Point3D(DLocation.X + width / 2 + width / 14 + 0.5f, DLocation.Y + height / 4 + barHeight, DLocation.Z), new Point3D(DLocation.X + width / 2 + width / 14 + 0.5f, DLocation.Y + 3 * height / 4 - barHeight, DLocation.Z));
DxfLine outerUpRightDxfLine = new DxfLine(new Point3D(DLocation.X + width / 2 + width / 14 + 0.5f, DLocation.Y + 3 * height / 4, DLocation.Z), new Point3D(DLocation.X + width / 2 + width / 14 + 0.5f, DLocation.Y + height - outer_in_space, DLocation.Z));
doc.Entities.Add(outerLeftDxfLine);
doc.Entities.Add(inLeftDxfLine);
//左边的门闩小矩形
double downLeftX = DLocation.X + outer_mid_space - barWidth / 2 + (outer_in_space - outer_mid_space) / 2;
double downLeftY = DLocation.Y + height / 4;
writeRepresentDoorBarRectangle(doc, new DLocation(downLeftX, downLeftY, DLocation.Z), DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
double upLeftX = downLeftX;
double upLeftY = DLocation.Y + 3 * height / 4 - barHeight;
writeRepresentDoorBarRectangle(doc, new DLocation(upLeftX, upLeftY, DLocation.Z), DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
//两个个小圈
//底部
writeCirle(doc, new DLocation(DLocation.X + width-2*outer_in_space, DLocation.Y + 2 * outer_in_space, DLocation.Z), (outer_in_space - outer_mid_space) / 2);
//顶部
writeCirle(doc, new DLocation(DLocation.X + width-2*outer_in_space, DLocation.Y + height - 2 * outer_in_space, DLocation.Z), (outer_in_space - outer_mid_space) / 2);
//画门把手
Handle.Draw(doc, new DLocation(DLocation.X + width / 4+outer_mid_space/2, DLocation.Y + 3 * height / 4 - barHeight, DLocation.Z));
Handle.Draw(doc, new DLocation(DLocation.X + width / 4 + outer_mid_space/2, DLocation.Y + height / 4, DLocation.Z));
writeDoorBarRectangle(doc, DLocation, DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
}
private static DLocation topViewRightLocation; //下一个坐标
#endregion Fields
#region Methods
/// <summary>
/// 获取计算好的entity
/// </summary>
/// <param name="entity"></param>
/// <param name="location"></param>
/// <param name="relativeStartLocation"></param>
/// <returns></returns>
public static DxfEntity getCaculateLocationEntity(DxfEntity entity,DLocation location,DLocation relativeStartLocation)
{
switch (entity.EntityType){
case "LINE":
{
DxfLine dxfLine = (DxfLine)entity;
double lineLenght = dxfLine.End.X - dxfLine.Start.X;
double lineHeight=dxfLine.End.Y-dxfLine.Start.Y;
dxfLine.Start = new Point3D(dxfLine.Start.X - relativeStartLocation.X + location.X, dxfLine.Start.Y - relativeStartLocation.Y + location.Y, location.Z);
dxfLine.End = new Point3D(dxfLine.Start.X+lineLenght,dxfLine.Start.Y+lineHeight,location.Z);
//只需要将Line的坐标加入，每个图形底部都存在Line
if (Math.Round(dxfLine.Start.Y*10)/10 == Math.Round(dxfLine.End.Y*10)/10||Math.Round(dxfLine.Start.X*10)/10==Math.Round(dxfLine.End.X*10)/10)
{
positionList.Add(dxfLine.Start);
positionList.Add(dxfLine.End);
}
return dxfLine;
};
case "ARC":
{
DxfArc dxfArc = (DxfArc)entity;
int flag = 0;
if (dxfArc.Center.X < 0)
{
flag = 1;
}
dxfArc.Center = new Point3D(Math.Abs(dxfArc.Center.X)-relativeStartLocation.X+location.X,dxfArc.Center.Y-relativeStartLocation.Y+location.Y,dxfArc.Center.Z);
if (flag == 1)
{
dxfArc.Center = new Point3D(0 - dxfArc.Center.X, dxfArc.Center.Y, dxfArc.Center.Z);
}
return dxfArc;
};
case "CIRCLE":
{
DxfCircle dxfCircle =(DxfCircle)entity;
dxfCircle.Center = new Point3D(dxfCircle.Center.X-relativeStartLocation.X+location.X,dxfCircle.Center.Y-relativeStartLocation.Y+location.Y,dxfCircle.Center.Z);
return dxfCircle;
}
case "POINT":
{
DxfPoint dxfPoint = (DxfPoint)entity;
dxfPoint.Position = new Point3D(dxfPoint.Position.X - relativeStartLocation.X + location.X, dxfPoint.Position.Y - relativeStartLocation.Y + location.Y, dxfPoint.Position.Z);
return dxfPoint;
}
case "TEXT":
{
DxfText dxfText =(DxfText)entity;
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X-relativeStartLocation.X+location.X,dxfText.AlignmentPoint1.Y-relativeStartLocation.Y+location.Y,dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
return dxfText;
}
case "ELLIPSE":
{
DxfEllipse dxfEllipse = (DxfEllipse)entity;
dxfEllipse.Center = new Point3D(dxfEllipse.Center.X - relativeStartLocation.X + location.X, dxfEllipse.Center.Y - relativeStartLocation.Y + location.Y, dxfEllipse.Center.Z);
return dxfEllipse;
}
case "LWPOLYLINE":
{
DxfLwPolyline dxfLwPolyLine = (DxfLwPolyline)entity;
int len = dxfLwPolyLine.Vertices.Count;
for (int i = 0; i < len; i++)
{
dxfLwPolyLine.Vertices[i].Position = new Point2D(dxfLwPolyLine.Vertices[i].Position.X - relativeStartLocation.X + location.X, dxfLwPolyLine.Vertices[i].Position.Y - relativeStartLocation.Y + location.Y);
}
return dxfLwPolyLine;
}
case "DIMENSION":
{
DxfDimension.Aligned dxfDimension =(DxfDimension.Aligned)entity;
DxfDimension.Aligned tempDemsion = new DxfDimension.Aligned(testModel.DefaultDimensionStyle);
dxfDimension.ExtensionLine1StartPoint = new Point3D(dxfDimension.ExtensionLine1StartPoint.X-relativeStartLocation.X+location.X,dxfDimension.ExtensionLine1StartPoint.Y-relativeStartLocation.Y+location.Y,location.Z);
dxfDimension.ExtensionLine2StartPoint = new Point3D(dxfDimension.ExtensionLine2StartPoint.X-relativeStartLocation.X+location.X,dxfDimension.ExtensionLine2StartPoint.Y-relativeStartLocation.Y+location.Y,location.Z);
// dxfDimension.DimensionLineLocation = new Point3D(dxfDimension.DimensionLineLocation.X-relativeStartLocation.X+location.X,dxfDimension.DimensionLineLocation.Y-relativeStartLocation.Y+location.Y,dxfDimension.DimensionLineLocation.Z);
tempDemsion.ExtensionLine1StartPoint = dxfDimension.ExtensionLine1StartPoint;
tempDemsion.ExtensionLine2StartPoint = dxfDimension.ExtensionLine2StartPoint;
tempDemsion.Color = dxfDimension.Color;
tempDemsion.DimensionStyleOverrides.TextHeight = 56d;
tempDemsion.DimensionStyleOverrides.ArrowSize = 20d;
if (Math.Round(dxfDimension.ExtensionLine1StartPoint.X * 100) / 100 == Math.Round(dxfDimension.ExtensionLine2StartPoint.X * 100) / 100)
{
tempDemsion.Text = "" + Convert.ToInt32(Math.Abs(dxfDimension.ExtensionLine1StartPoint.Y - dxfDimension.ExtensionLine2StartPoint.Y) + 0.5);
}
else
{
tempDemsion.Text = "" + Convert.ToInt32(Math.Abs(dxfDimension.ExtensionLine1StartPoint.X - dxfDimension.ExtensionLine2StartPoint.X) + 0.5);
}
tempDemsion.DimensionLineLocation = new Point3D(dxfDimension.DimensionLineLocation.X - relativeStartLocation.X + location.X, dxfDimension.DimensionLineLocation.Y - relativeStartLocation.Y + location.Y, dxfDimension.DimensionLineLocation.Z);
return tempDemsion;
}
case "INSERT":
{
DxfInsert dxfInsert = (DxfInsert)entity;
//可行，但是存在很多点点
dxfInsert.InsertionPoint = new Point3D(dxfInsert.InsertionPoint.X - relativeStartLocation.X + location.X, dxfInsert.InsertionPoint.Y - relativeStartLocation.Y + location.Y, dxfInsert.InsertionPoint.Z);
return dxfInsert;
}
case "HATCH":
{
DxfHatch dxfHatch = (DxfHatch)entity;
int len = dxfHatch.BoundaryPaths.Count;
for (int i = 0; i < len; i++)
{
int len1 = dxfHatch.BoundaryPaths[i].Edges.Count;
for (int j = 0; j < len1;j++ )
{
DxfHatch.BoundaryPath.LineEdge lineEdge = (DxfHatch.BoundaryPath.LineEdge)dxfHatch.BoundaryPaths[i].Edges[j];
lineEdge.Start = new Point2D(lineEdge.Start.X-relativeStartLocation.X+location.X,lineEdge.Start.Y-relativeStartLocation.Y+location.Y);
lineEdge.End = new Point2D(lineEdge.End.X-relativeStartLocation.X+location.X,lineEdge.End.Y-relativeStartLocation.Y+location.Y);
}
}
return dxfHatch;
}
default:return entity;
}
}
public static void puzzle(List<string> dxfFileNameList,List<string> dxfTopViewList,List<TextValue> valueList,string frameName)
{
DxfModel targetModel=new DxfModel();
testModel = targetModel;
targetModel.TextStyles.Add(textStyle);
CloneContext cloneContext = new CloneContext(targetModel, ReferenceResolutionType.CloneMissing);
for (int i = 0; i < dxfFileNameList.Count;i++ )
{
DxfModel sourceModel = DxfReader.Read(dxfFileNameList[i]);
//第一个图形作为初始
if (i == 0)
{
//拼到一个图纸中后，Entity应该参照那个的左下角坐标
location = getRelativeStartLocation(sourceModel);
//源图纸中Entity的左下角坐标
relativeStartLocation = getRelativeStartLocation(sourceModel);
//保存第一个算好的左下角坐标
firstDimensionLocation = location;
foreach (DxfEntity entity in sourceModel.Entities)
{
DxfEntity clonedEntity = (DxfEntity)entity.Clone(cloneContext);
clonedEntity = getCaculateLocationEntity(clonedEntity, location, relativeStartLocation);
targetModel.Entities.Add(clonedEntity);
}
rightLocation = getNextStartLocation(positionList);
//记录最后一点坐标
lastDimensionLocation = rightLocation;
//清空坐标位置链表
positionList.RemoveAll(name => { return true;});
//花标注
DxfDimension.Aligned dxfDimension = new DxfDimension.Aligned(targetModel.DefaultDimensionStyle);
dxfDimension.ExtensionLine1StartPoint = new Point3D(location.X, location.Y, location.Z);
dxfDimension.ExtensionLine2StartPoint = new Point3D(rightLocation.X, rightLocation.Y, rightLocation.Z);
dxfDimension.DimensionStyleOverrides.TextHeight = 56d;
dxfDimension.DimensionStyleOverrides.ArrowSize = 56d;
dxfDimension.Text = getDimensionText(dxfDimension);
// dxfDimension.DimensionLineLocation = new Point3D((location.X+rightLocation.X)/2,location.Y-8,location.Z);
targetModel.Entities.Add(dxfDimension);
}
else
{
location = rightLocation;
relativeStartLocation = getRelativeStartLocation(sourceModel);
foreach (DxfEntity entity in sourceModel.Entities)
{
DxfEntity clonedEntity = (DxfEntity)entity.Clone(cloneContext);
clonedEntity = getCaculateLocationEntity(clonedEntity, location, relativeStartLocation);
targetModel.Entities.Add(clonedEntity);
}
rightLocation = getNextStartLocation(positionList);
lastDimensionLocation = rightLocation;
//计算最后一个元素右上角坐标
if (i == dxfFileNameList.Count - 1)
{
rightTopDimensionLocation = getRightTopLocation(positionList);
largestLocation = getLargestXLocation(positionList);
}
positionList.RemoveAll(name => { return true; });
//花标注
DxfDimension.Aligned dxfDimension = new DxfDimension.Aligned(targetModel.DefaultDimensionStyle);
dxfDimension.ExtensionLine1StartPoint = new Point3D(location.X, location.Y, location.Z);
dxfDimension.ExtensionLine2StartPoint = new Point3D(rightLocation.X, rightLocation.Y, rightLocation.Z);
dxfDimension.DimensionStyleOverrides.TextHeight = 56d;
dxfDimension.DimensionStyleOverrides.ArrowSize = 56d;
dxfDimension.Text = getDimensionText(dxfDimension);
targetModel.Entities.Add(dxfDimension);
}
}
DxfDimension.Aligned wholeDxfDimension = new DxfDimension.Aligned(targetModel.DefaultDimensionStyle);
wholeDxfDimension.ExtensionLine1StartPoint = new Point3D(firstDimensionLocation.X, firstDimensionLocation.Y, firstDimensionLocation.Z);
wholeDxfDimension.ExtensionLine2StartPoint = new Point3D(lastDimensionLocation.X, lastDimensionLocation.Y, lastDimensionLocation.Z);
wholeDxfDimension.DimensionStyleOverrides.TextHeight = 56d;
wholeDxfDimension.DimensionStyleOverrides.ArrowSize = 56d;
wholeDxfDimension.Text = getDimensionText(wholeDxfDimension);
wholeDxfDimension.DimensionLineLocation = new Point3D(firstDimensionLocation.X+lastDimensionLocation.X,firstDimensionLocation.Y-1000,firstDimensionLocation.Z);
targetModel.Entities.Add(wholeDxfDimension);
DxfDimension.Aligned rightDimension = new DxfDimension.Aligned(targetModel.DefaultDimensionStyle);
rightDimension.ExtensionLine1StartPoint = new Point3D(lastDimensionLocation.X, lastDimensionLocation.Y, lastDimensionLocation.Z);
rightDimension.ExtensionLine2StartPoint = new Point3D(rightTopDimensionLocation.X, rightTopDimensionLocation.Y, rightTopDimensionLocation.Z);
rightDimension.DimensionStyleOverrides.TextHeight = 56d;
rightDimension.DimensionStyleOverrides.ArrowSize = 56d;
rightDimension.Text = getDimensionText(rightDimension);
rightDimension.DimensionLineLocation = new Point3D(largestLocation.X + 200, firstDimensionLocation.Y, firstDimensionLocation.Z);
targetModel.Entities.Add(rightDimension);
//绘制俯视图
for (int i = 0; i < dxfTopViewList.Count;i++ )
{
DxfModel topViewSourceModel = new DxfModel();
topViewSourceModel = DxfReader.Read(dxfTopViewList[i]);
if (i == 0)
{
topViewLocation = new DLocation(firstDimensionLocation.X, rightTopDimensionLocation.Y + RelativeDistance.yTopViewDistance, firstDimensionLocation.Z);
topViewRelativeLocation = getTopViewRelativeStartLocation(topViewSourceModel);
}
else
{
topViewLocation = topViewRightLocation;
DxfModel filterModel = getFilterBottomNotLineDxfModel(topViewSourceModel);
topViewRelativeLocation = getTopViewRelativeStartLocation(filterModel);
}
foreach(DxfEntity entity in topViewSourceModel.Entities)
{
DxfEntity clonedEntity = (DxfEntity)entity.Clone(cloneContext);
clonedEntity = getCaculateLocationEntity(clonedEntity, topViewLocation, topViewRelativeLocation);
targetModel.Entities.Add(clonedEntity);
}
topViewRightLocation = getTopViewNextStartLocation(positionList);
positionList.RemoveAll(name=>{return true;});
}
// 复制frame框体
DxfModel sourceFrameModel = new DxfModel();
sourceFrameModel = DxfReader.Read(frameName);
DLocation frameLeftDownLocation = getFrameLeftDownLocation(sourceFrameModel);
frameLastLineX = getFrameLastVerticalLineX(sourceFrameModel);
Point2D frameRightPoint2D = getFrameRightPoint(sourceFrameModel);
//这里求的是宽度比较，因为Frame的最后位置还没确定，不能单纯的考个别点进行位置大小比较
if ((largestLocation.X-firstDimensionLocation.X+RelativeDistance.xDistance)>= (frameRightPoint2D.X-frameLeftDownLocation.X))
{
RelativeDistance.increaseWidth = (largestLocation.X - firstDimensionLocation.X + RelativeDistance.xDistance) - (frameRightPoint2D.X - frameLeftDownLocation.X) + RelativeDistance.xDistance;
}
else
{
RelativeDistance.increaseWidth = 0;
}
foreach (DxfEntity entity in sourceFrameModel.Entities)
{
DxfEntity clonedEntity = (DxfEntity)entity.Clone(cloneContext);
clonedEntity = getFrameEntity(clonedEntity, firstDimensionLocation, frameLeftDownLocation, RelativeDistance.increaseWidth);
targetModel.Entities.Add(clonedEntity);
}
//传递表单数据值
foreach(TextValue textValue in textValueList){
foreach(TextValue transFormValue in valueList){
if (textValue.text.Equals(transFormValue.text))
{
DxfText dxfText = new DxfText();
dxfText.Text = transFormValue.value;
dxfText.Height = textValue.height;
dxfText.Thickness = 0.5d;
dxfText.AlignmentPoint1 = new Point3D(textValue.valuePosition.X, textValue.valuePosition.Y, textValue.valuePosition.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
targetModel.Entities.Add(dxfText);
}
}
}
cloneContext.ResolveReferences();
DxfWriter.Write("cloneTest.dxf", targetModel);
}
//画单门有门闩的矩形框
public static void writeDoorBarRectangle(DxfModel doc, DLocation DLocation, string[] DxfText, double height, double width, double outer_mid_space, double outer_in_space,double barHeight,double barWidth)
{
//最外围矩形
writeOuterDoorRectangle(doc, DLocation, height, width);
//中间矩形
DxfLine midBottomDxfLine = new DxfLine(new Point3D(DLocation.X + outer_mid_space, DLocation.Y + outer_mid_space, DLocation.Z), new Point3D(DLocation.X + width - outer_mid_space, DLocation.Y + outer_mid_space, DLocation.Z));
DxfLine midDownLeftDxfLine = new DxfLine(new Point3D(DLocation.X + outer_mid_space, DLocation.Y + outer_mid_space, DLocation.Z), new Point3D(DLocation.X + outer_mid_space, DLocation.Y + height / 4, DLocation.Z));
DxfLine midMidLeftDxfLine = new DxfLine(new Point3D(DLocation.X + outer_mid_space, DLocation.Y + height / 4 + barHeight, DLocation.Z), new Point3D(DLocation.X + outer_mid_space, DLocation.Y + 3 * height / 4 - barHeight, DLocation.Z));
DxfLine midUpLeftDxfLine = new DxfLine(new Point3D(DLocation.X + outer_mid_space, DLocation.Y + 3*height / 4, DLocation.Z), new Point3D(DLocation.X + outer_mid_space, DLocation.Y +height-outer_mid_space, DLocation.Z));
DxfLine midTopDxfLine = new DxfLine(new Point3D(DLocation.X + outer_mid_space, DLocation.Y + height - outer_mid_space, DLocation.Z), new Point3D(DLocation.X + width - outer_mid_space, DLocation.Y + height - outer_mid_space, DLocation.Z));
DxfLine midRightDxfLine = new DxfLine(new Point3D(DLocation.X + width - outer_mid_space, DLocation.Y + height - outer_mid_space, DLocation.Z), new Point3D(DLocation.X + width - outer_mid_space, DLocation.Y + outer_mid_space, DLocation.Z));
doc.Entities.Add(midBottomDxfLine);
doc.Entities.Add(midDownLeftDxfLine);
doc.Entities.Add(midMidLeftDxfLine);
doc.Entities.Add(midUpLeftDxfLine);
doc.Entities.Add(midTopDxfLine);
doc.Entities.Add(midRightDxfLine);
//内部矩形
DxfLine inBottomDxfLine = new DxfLine(new Point3D(DLocation.X + outer_in_space, DLocation.Y + outer_in_space, DLocation.Z), new Point3D(DLocation.X + width - outer_in_space, DLocation.Y + outer_in_space, DLocation.Z));
DxfLine inDownLeftDxfLine = new DxfLine(new Point3D(DLocation.X + outer_in_space, DLocation.Y + outer_in_space, DLocation.Z), new Point3D(DLocation.X + outer_in_space, DLocation.Y + height/4, DLocation.Z));
DxfLine inmidLeftDxfLine = new DxfLine(new Point3D(DLocation.X + outer_in_space, DLocation.Y + height / 4 + barHeight, DLocation.Z), new Point3D(DLocation.X + outer_in_space, DLocation.Y + 3*height/4 - barHeight, DLocation.Z));
DxfLine inUpLeftDxfLine = new DxfLine(new Point3D(DLocation.X + outer_in_space, DLocation.Y + 3*height / 4, DLocation.Z), new Point3D(DLocation.X + outer_in_space, DLocation.Y + height-outer_in_space, DLocation.Z));
DxfLine inTopDxfLine = new DxfLine(new Point3D(DLocation.X + outer_in_space, DLocation.Y + height - outer_in_space, DLocation.Z), new Point3D(DLocation.X + width - outer_in_space, DLocation.Y + height - outer_in_space, DLocation.Z));
DxfLine inRightDxfLine = new DxfLine(new Point3D(DLocation.X + width - outer_in_space, DLocation.Y + height - outer_in_space, DLocation.Z), new Point3D(DLocation.X + width - outer_in_space, DLocation.Y + outer_in_space, DLocation.Z));
doc.Entities.Add(inBottomDxfLine);
doc.Entities.Add(inDownLeftDxfLine);
doc.Entities.Add(inmidLeftDxfLine);
doc.Entities.Add(inUpLeftDxfLine);
doc.Entities.Add(inTopDxfLine);
doc.Entities.Add(inRightDxfLine);
//门中文字
double DxfTextHeight = DoorInitHeightAndWidth.DxfTextHeight;
for (int i = 0; i < DxfText.Length; i++)
{
DxfText doorRectangleDxfText = new DxfText(DxfText[i], new Point3D(DLocation.X + width / 3, DLocation.Y + 3 * height / 4 - i * DxfTextHeight, DLocation.Z), DxfTextHeight);
doc.Entities.Add(doorRectangleDxfText);
}
}
public void Draw(DxfModel dxf, DLocation DLocation, double boxWidth, double boxHeight, List<PictureBoxInfo> pictureBoxInfoList,int coolingType)
{
DataManager dataManager=new DataManager();
//boxWidth = dataManager.getTotalWidth(pictureBoxInfoList);
//得到框架信息
var boxEntity = dataCenter.BoxEntity;
DLocation = new DLocation(DLocation.X - 120d, DLocation.Y + boxEntity.TopViewHeight + 80.0d + boxEntity.UpHeight + boxEntity.DownHeight, 0);
boxWidth = boxEntity.Width + 240.0d;
boxHeight = boxEntity.TopViewHeight + boxEntity.UpHeight + boxEntity.DownHeight + 160.0d;
/****************************************************************************/
//绘制最外框
/****************************************************************************/
Point3D v1 = new Point3D(DLocation.X, DLocation.Y, DLocation.Z);
Point3D v2 = new Point3D(DLocation.X, DLocation.Y - boxHeight, DLocation.Z);
Point3D v3 = new Point3D(DLocation.X + boxWidth, DLocation.Y - boxHeight, DLocation.Z);
Point3D v4 = new Point3D(DLocation.X + boxWidth, DLocation.Y, DLocation.Z);
//DxfLinePointer.Draw(dxf, DLocation);
//Slash.Draw(dxf,new DLocation(v2.X,v2.Y,v2.Z));
//Fan.Draw(dxf, v2,v1,2);
DxfLine DxfLine12 = new DxfLine(v1, v2);
dxf.Entities.Add(DxfLine12);
DxfLine DxfLine23 = new DxfLine(v2, v3);
dxf.Entities.Add(DxfLine23);
DxfLine DxfLine34 = new DxfLine(v3, v4);
dxf.Entities.Add(DxfLine34);
DxfLine DxfLine14 = new DxfLine(v1, v4);
dxf.Entities.Add(DxfLine14);
/****************************************************************************/
//绘制左上角的配置信息
/****************************************************************************/
Configuration.Draw(dxf, new DLocation(v1.X, v1.Y), dataCenter.Configurations);
/****************************************************************************/
//绘制左下角的节信息
/****************************************************************************/
Section.Draw(dxf, new DLocation(v2.X, v2.Y), dataCenter.SectionEntity);
/****************************************************************************/
//绘制底部的订单信息
/****************************************************************************/
Order.Draw(dxf, new DLocation(v2.X, v2.Y), boxWidth, dataCenter.OrderEntity);
//俯视图左下角的坐标点
DLocation v5 = new DLocation(DLocation.X + 120.0d, DLocation.Y - boxEntity.TopViewHeight - 50.0d, DLocation.Z);
/****************************************************************************/
//绘制俯视图
/****************************************************************************/
//AssembleTopView.assembleTopView(pictureBoxInfoList, dxf,
// v5, null, 50.0d, 18.0d, 2.0d, 2.86f, 2.0d, 2.0d);
AssembleTopView.assembleTopView(pictureBoxInfoList, dxf, v5, dataCenter.topViewConfigure);
//正视图左下角的坐标点
DLocation v6 = new DLocation(DLocation.X + 120.0d, DLocation.Y - boxEntity.TopViewHeight - 80.0d - boxEntity.UpHeight - boxEntity.DownHeight, DLocation.Z);
/****************************************************************************/
//绘制正视图
/****************************************************************************/
AssembleDetailMechine.assembleDetailMechine(pictureBoxInfoList, dxf,v6, dataCenter.detailMechineConfigure, coolingType);
//正视图两边的风向箭头位置
//存在第一层
DLocation v7 = new DLocation(DLocation.X + 70.0d, DLocation.Y - 90.0d-boxEntity.TopViewHeight-boxEntity.UpHeight-boxEntity.DownHeight/2, DLocation.Z);
DLocation v8 = new DLocation(DLocation.X + boxWidth - 50.0d, DLocation.Y - 90.0d - boxEntity.TopViewHeight - boxEntity.UpHeight - boxEntity.DownHeight / 2, DLocation.Z);
/****************************************************************************/
//绘制正视图两边的风向箭头
/****************************************************************************/
//判断是否存在两层，记录两层第一个元素的位置
int upFirstElemnet = AssembleDetailMechine.isTwoLayers(pictureBoxInfoList);
Wind.Draw(dxf, v7, boxEntity.IsLeft);
if (upFirstElemnet == -1)
{
if (pictureBoxInfoList.ElementAt(pictureBoxInfoList.Count - 1).name.Equals("SFC") || pictureBoxInfoList.ElementAt(pictureBoxInfoList.Count - 1).name.Equals("SDD"))
{
PictureBoxInfo tempPictureBoxInfo = pictureBoxInfoList.ElementAt(pictureBoxInfoList.Count - 1);
List<AirFlowUpDimension> airFlowList = AirFlowUpDimensionConfigure.getAirFlowList();
foreach (var airFlowDimension in airFlowList)
{
if (tempPictureBoxInfo.coolingType.Equals(airFlowDimension.coolingType) && tempPictureBoxInfo.name.Equals(airFlowDimension.imageName))
{
Wind.DrawVerticalWind(dxf, new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension*1.3, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height * 1.3, tempPictureBoxInfo.DLocation.Z));
//这里多写了一个标注，其实不应该写在这里应该写在AssembleDetailMechine中，只是这里写方便，但不符原则
DoorRectangle.writeDimension(dxf, new DLocation(tempPictureBoxInfo.DLocation.X, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), 16, 1, 3, "top");
DoorRectangle.writeDimension(dxf, new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), 16, 1, 3, "top");
}
}
}
else
{
Wind.Draw(dxf, v8, boxEntity.IsLeft);
}
}
else
{
if (pictureBoxInfoList.ElementAt(upFirstElemnet-1).name.Equals("SFC") || pictureBoxInfoList.ElementAt(upFirstElemnet-1).name.Equals("SDD"))
{
PictureBoxInfo tempPictureBoxInfo = pictureBoxInfoList.ElementAt(upFirstElemnet - 1);
List<AirFlowUpDimension> airFlowList = AirFlowUpDimensionConfigure.getAirFlowList();
foreach (var airFlowDimension in airFlowList)
{
if (tempPictureBoxInfo.coolingType.Equals(airFlowDimension.coolingType) && tempPictureBoxInfo.name.Equals(airFlowDimension.imageName))
{
Wind.DrawVerticalWind(dxf, new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension*1.3, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height * 1.3, tempPictureBoxInfo.DLocation.Z));
//这里多写了一个标注，其实不应该写在这里应该写在AssembleDetailMechine中，只是这里写方便，但不符原则
DoorRectangle.writeDimension(dxf, new DLocation(tempPictureBoxInfo.DLocation.X, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), 16, 1, 3, "top");
DoorRectangle.writeDimension(dxf, new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), 16, 1, 3, "top");
}
}
}
else
{
Wind.Draw(dxf, v8, boxEntity.IsLeft);
}
}
//如果存在第二层
if (boxEntity.UpHeight != 0)
{
DLocation v9 = new DLocation(DLocation.X + 70.0d, DLocation.Y - 90.0d - boxEntity.TopViewHeight - boxEntity.UpHeight / 2, DLocation.Z);
DLocation v10 = new DLocation(DLocation.X + boxWidth - 50.0d, DLocation.Y - 90.0d - boxEntity.TopViewHeight - boxEntity.UpHeight / 2, DLocation.Z);
if (pictureBoxInfoList.ElementAt(upFirstElemnet).name.Equals("PEC") || pictureBoxInfoList.ElementAt(upFirstElemnet).name.Equals("EDD"))
{
PictureBoxInfo tempPictureBoxInfo = pictureBoxInfoList.ElementAt(upFirstElemnet);
List<AirFlowUpDimension> airFlowList = AirFlowUpDimensionConfigure.getAirFlowList();
foreach (var airFlowDimension in airFlowList)
{
if (tempPictureBoxInfo.coolingType.Equals(airFlowDimension.coolingType) && tempPictureBoxInfo.name.Equals(airFlowDimension.imageName))
{
Wind.DrawVerticalWind(dxf, new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension*1.3, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height * 1.3, tempPictureBoxInfo.DLocation.Z));
//这里多写了一个标注，其实不应该写在这里应该写在AssembleDetailMechine中，只是这里写方便，但不符原则
DoorRectangle.writeDimension(dxf, new DLocation(tempPictureBoxInfo.DLocation.X, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), 16, 1, 3, "top");
DoorRectangle.writeDimension(dxf, new DLocation(tempPictureBoxInfo.DLocation.X+airFlowDimension.topLeftDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), new DLocation(tempPictureBoxInfo.DLocation.X + airFlowDimension.topLeftDimension+airFlowDimension.topRightDimension, tempPictureBoxInfo.DLocation.Y + tempPictureBoxInfo.height, tempPictureBoxInfo.DLocation.Z), 16, 1, 3, "top");
}
}
}
else
{
Wind.Draw(dxf, v9, !boxEntity.IsLeft);
}
Wind.Draw(dxf, v10, !boxEntity.IsLeft);
}
}
public DetailMechineConfigure getDetailMechineCnfigure(List<PictureBoxInfo> pictureBoxNameList, DxfModel dxf,
DLocation DLocation)
{
return new DetailMechineConfigure(pictureBoxNameList,
new string[] { "hello", "world", "helloworld" }, 44.0d, 18, 2.0d, 2.86f, 2.0d, 2.0d);
}
public static void assembleTopView(List<PictureBoxInfo> imageNameList, DxfModel dxf, DLocation DLocation, TopViewConfigure tvc)
{
int upFirstElement = AssembleDetailMechine.isTwoLayers(imageNameList);
if (upFirstElement!= -1)
{
List<PictureBoxInfo> oneImageNameList = new List<PictureBoxInfo>();
List<PictureBoxInfo> twoImageNameList = new List<PictureBoxInfo>();
for (int i = 0, len = imageNameList.Count; i < len; i++)
{
if (i == 0)
{
//if (imageNameList.ElementAt(i).name.Equals("HRA"))
//{
// //这里的virtralPictrueBox和realPictureBox中设置的Y坐标只是为后面onelist和twolist判断是其作用，其他没什么实质作用
// PictureBoxInfo virtualPictureBox = new PictureBoxInfo();
// virtualPictureBox.name = "virtualHRA";
// //主要为了记录虚拟的框的坐标，为了画dxf是提供依据
// //virtualPictureBox.DLocation = new DLocation(imageNameList.ElementAt(i).DLocation.X, imageNameList.ElementAt(i).DLocation.Y + 113 + 4, imageNameList.ElementAt(i).DLocation.Z);
// virtualPictureBox.DLocation = new DLocation(imageNameList.ElementAt(i).DLocation.X, imageNameList.ElementAt(i).DLocation.Y, imageNameList.ElementAt(i).DLocation.Z);
// oneImageNameList.Add(virtualPictureBox);
// PictureBoxInfo realPictureBox = new PictureBoxInfo();
// realPictureBox.name = imageNameList.ElementAt(i).name;
// realPictureBox.DLocation = new DLocation(imageNameList.ElementAt(i).DLocation.X, imageNameList.ElementAt(i).DLocation.Y + 113 + 4, imageNameList.ElementAt(i).DLocation.Z);
// twoImageNameList.Add(realPictureBox);
//}
//else
//{
oneImageNameList.Add(imageNameList.ElementAt(i));
//}
}
else
{
if (oneImageNameList.ElementAt(0).DLocation.Y == imageNameList.ElementAt(i).DLocation.Y)
{
//if (imageNameList.ElementAt(i).name.Equals("HRA"))
//{
// PictureBoxInfo virtualPictureBox = new PictureBoxInfo();
// virtualPictureBox.name = "virtualHRA";
// virtualPictureBox.DLocation = new DLocation(imageNameList.ElementAt(i).DLocation.X, imageNameList.ElementAt(i).DLocation.Y + 113 + 4, imageNameList.ElementAt(i).DLocation.Z);
// oneImageNameList.Add(virtualPictureBox);
// twoImageNameList.Add(imageNameList.ElementAt(i));
//}
//else
//{
oneImageNameList.Add(imageNameList.ElementAt(i));
//}
}
else
{
//if (imageNameList.ElementAt(i).name.Equals("HRA"))
//{
// PictureBoxInfo virtualPictureBox = new PictureBoxInfo();
// virtualPictureBox.name = "virtualHRA";
// virtualPictureBox.DLocation = new DLocation(imageNameList.ElementAt(i).DLocation.X, imageNameList.ElementAt(i).DLocation.Y + 113 + 4, imageNameList.ElementAt(i).DLocation.Z);
// twoImageNameList.Add(virtualPictureBox);
// oneImageNameList.Add(imageNameList.ElementAt(i));
//}
//else
//{
twoImageNameList.Add(imageNameList.ElementAt(i));
//}
}
}
}
if (oneImageNameList.ElementAt(0).DLocation.Y> twoImageNameList.ElementAt(0).DLocation.Y)
{
//第一层
assembleTopView(oneImageNameList, dxf, DLocation, tvc.DxfText, tvc.height, tvc.width, tvc.outer_mid_space, tvc.outer_in_space, tvc.barHeight, tvc.barWidth,-1);
//DLocation为oneImageNamelist第一个元素的坐标
assembleTopView(twoImageNameList, dxf,new DLocation(twoImageNameList.ElementAt(0).DLocation.X,DLocation.Y,DLocation.Z), tvc.DxfText, tvc.height, tvc.width, tvc.outer_mid_space, tvc.outer_in_space, tvc.barHeight, tvc.barWidth,upFirstElement);
}
else
{
//第一层
assembleTopView(twoImageNameList, dxf, DLocation, tvc.DxfText, tvc.height, tvc.width, tvc.outer_mid_space, tvc.outer_in_space, tvc.barHeight, tvc.barWidth,-1);
assembleTopView(oneImageNameList, dxf, DLocation, tvc.DxfText, tvc.height, tvc.width, tvc.outer_mid_space, tvc.outer_in_space, tvc.barHeight, tvc.barWidth, upFirstElement);
}
}
else
{
assembleTopView(imageNameList, dxf, DLocation, tvc.DxfText, tvc.height, tvc.width, tvc.outer_mid_space, tvc.outer_in_space, tvc.barHeight, tvc.barWidth);
}
}
public static void assembleTopView(List<PictureBoxInfo> imageNameList, DxfModel dxf, DLocation DLocation, string[] DxfText, double height, double width, double outer_mid_space, double outer_in_space, double barHeight, double barWidth,int upFirstElement=-1)
{
List<DLocation> storeDLocationList = new List<DLocation>();
for (int i = 0; i < imageNameList.Count; i++)
{
string imageName = imageNameList.ElementAt(i).name;
int coolingType=imageNameList.ElementAt(i).coolingType;
height = imageNameList.ElementAt(i).topViewHeight;
width = imageNameList.ElementAt(i).width;
if (upFirstElement == -1)
{
if (imageName.Equals("FTA") || imageName.Equals("FTC") || imageName.Equals("FTF") || imageName.Equals("FTH")||imageName.Equals("FTE"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i);
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
}
}
else if (imageName.Equals("MBA") || imageName.Equals("MBB") || imageName.Equals("MBC") || imageName.Equals("MBD") || imageName.Equals("MBE") || imageName.Equals("MBF") || imageName.Equals("MBG") || imageName.Equals("MBH") || imageName.Equals("MBI") || imageName.Equals("MBJ") || imageName.Equals("MBK"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i); ;
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
}
}
else if (imageName.Equals("PHA") || imageName.Equals("PHB") || imageName.Equals("PHC") || imageName.Equals("PHD"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i); ;
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
}
}
else if (imageName.Equals("HRA"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i);
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
}
}
else if (imageName.Equals("virtualHRA"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i);
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
}
}
else if (imageName.Equals("CLB") || imageName.Equals("CLC") || imageName.Equals("CLF") || imageName.Equals("CLG") || imageName.Equals("CLI") || imageName.Equals("CLM"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i);
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
}
}
else if (imageName.Equals("PEA") || imageName.Equals("PEC") || imageName.Equals("RFA") || imageName.Equals("SFA") || imageName.Equals("SFC") || imageName.Equals("SFD") || imageName.Equals("SDB") || imageName.Equals("SDD") || imageName.Equals("EDB") || imageName.Equals("RDB"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i);
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
//俯视图封口向上时
if (i ==imageNameList.Count-1)
{
if (imageName.Equals("SFC") || imageName.Equals("SDD"))
{
List<AirFlowUpDimension> airFlowList=AirFlowUpDimensionConfigure.getAirFlowList();
AirFlowUpDimension currentAirFlowDimension = new AirFlowUpDimension();
foreach (var airFlowDimension in airFlowList)
{
if (coolingType.Equals(airFlowDimension.coolingType) && imageName.Equals(airFlowDimension.imageName))
{
currentAirFlowDimension = airFlowDimension;
DLocation airFlowDLocation=new DLocation(currentDLocation.X+currentAirFlowDimension.topLeftDimension,currentDLocation.Y+currentAirFlowDimension.rightDownDimension,currentDLocation.Z);
DoorRectangle.writeOuterDoorRectangle(dxf,airFlowDLocation,currentAirFlowDimension.rightUpDimension,currentAirFlowDimension.topRightDimension);
//画标注上边
DoorRectangle.writeDimension(dxf, new DLocation(currentDLocation.X, currentDLocation.Y + currentAirFlowDimension.rightUpDimension + currentAirFlowDimension.rightDownDimension, currentDLocation.Z), new DLocation(currentDLocation.X + airFlowDimension.topLeftDimension, currentDLocation.Y + airFlowDimension.rightDownDimension+airFlowDimension.rightUpDimension, currentDLocation.Z), 16f, 1f, 5, "top");
DoorRectangle.writeDimension(dxf, new DLocation(currentDLocation.X + airFlowDimension.topLeftDimension, currentDLocation.Y + airFlowDimension.rightDownDimension + airFlowDimension.rightUpDimension, currentDLocation.Z), new DLocation(currentDLocation.X + airFlowDimension.topLeftDimension+airFlowDimension.topRightDimension, currentDLocation.Y + airFlowDimension.rightDownDimension + airFlowDimension.rightUpDimension, currentDLocation.Z), 16f, 1f, 5, "top");
//画右边标注
DoorRectangle.writeDimension(dxf, new DLocation(currentDLocation.X + airFlowDimension.topLeftDimension+airFlowDimension.topRightDimension, currentDLocation.Y, currentDLocation.Z), new DLocation(currentDLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, currentDLocation.Y + airFlowDimension.rightDownDimension, currentDLocation.Z), 16f, 1f, 3, "right");
DoorRectangle.writeDimension(dxf, new DLocation(currentDLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, currentDLocation.Y+airFlowDimension.rightDownDimension, currentDLocation.Z), new DLocation(currentDLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, currentDLocation.Y + airFlowDimension.rightDownDimension+airFlowDimension.rightUpDimension, currentDLocation.Z), 16f, 1f, 3, "right");
continue;
}
}
}
}
}
}
else if (imageName.Equals("BBA") || imageName.Equals("BBB") || imageName.Equals("BBC") || imageName.Equals("BBD") || imageName.Equals("BBE") || imageName.Equals("BBF"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i);
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
}
}
else if (imageName.Equals("TRA") || imageName.Equals("TRB") || imageName.Equals("TRC") || imageName.Equals("TRD") || imageName.Equals("TRE") || imageName.Equals("TRF"))
{
if (i == 0)
{
DoorRectangle.writeTopViewRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
storeDLocationList.Add(DLocation);
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i);
DoorRectangle.writeTopViewRectangle(dxf, currentDLocation, DxfText, height, width, outer_mid_space, outer_in_space);
}
}
}
else
{
if (i == 0)
{
DoorRectangle.writeOuterDoorRectangle(dxf, DLocation, height, width);
storeDLocationList.Add(DLocation);
//处理向上的风口问题
if (imageName.Equals("PEC") || imageName.Equals("EDD"))
{
List<AirFlowUpDimension> airFlowList = AirFlowUpDimensionConfigure.getAirFlowList();
AirFlowUpDimension currentAirFlowDimension = new AirFlowUpDimension();
foreach (var airFlowDimension in airFlowList)
{
if (coolingType.Equals(airFlowDimension.coolingType) && imageName.Equals(airFlowDimension.imageName))
{
currentAirFlowDimension = airFlowDimension;
DLocation airFlowDLocation = new DLocation(DLocation.X + currentAirFlowDimension.topLeftDimension, DLocation.Y + currentAirFlowDimension.rightDownDimension, DLocation.Z);
DoorRectangle.writeOuterDoorRectangle(dxf, airFlowDLocation, currentAirFlowDimension.rightUpDimension, currentAirFlowDimension.topRightDimension);
//画标注上边
DoorRectangle.writeDimension(dxf, new DLocation(DLocation.X, DLocation.Y + currentAirFlowDimension.rightUpDimension + currentAirFlowDimension.rightDownDimension, DLocation.Z), new DLocation(DLocation.X + airFlowDimension.topLeftDimension, DLocation.Y + airFlowDimension.rightDownDimension + airFlowDimension.rightUpDimension, DLocation.Z), 16f, 1f, 5, "top");
DoorRectangle.writeDimension(dxf, new DLocation(DLocation.X + airFlowDimension.topLeftDimension, DLocation.Y + airFlowDimension.rightDownDimension + airFlowDimension.rightUpDimension, DLocation.Z), new DLocation(DLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, DLocation.Y + airFlowDimension.rightDownDimension + airFlowDimension.rightUpDimension, DLocation.Z), 16f, 1f, 5, "top");
//画右边标注
DoorRectangle.writeDimension(dxf, new DLocation(DLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, DLocation.Y, DLocation.Z), new DLocation(DLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, DLocation.Y + airFlowDimension.rightDownDimension, DLocation.Z), 16f, 1f, 3, "right");
DoorRectangle.writeDimension(dxf, new DLocation(DLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, DLocation.Y + airFlowDimension.rightDownDimension, DLocation.Z), new DLocation(DLocation.X + airFlowDimension.topLeftDimension + airFlowDimension.topRightDimension, DLocation.Y + airFlowDimension.rightDownDimension + airFlowDimension.rightUpDimension, DLocation.Z), 16f, 1f, 3, "right");
continue;
}
}
}
}
else
{
DLocation currentDLocation = storeDLocationList.ElementAt(i);
DoorRectangle.writeOuterDoorRectangle(dxf, currentDLocation, height, width);
}
}
storeDLocationList.Add(new DLocation(storeDLocationList.ElementAt(i).X + width, storeDLocationList.ElementAt(i).Y, storeDLocationList.ElementAt(i).Z));
}
//第一层
if (upFirstElement == -1)
{
//画标注
PictureBoxInfo firstPictureInfo = imageNameList.ElementAt(0);
DLocation firstDLocation = storeDLocationList.ElementAt(0);
DoorRectangle.writeDimension(dxf, new DLocation(firstDLocation.X, firstDLocation.Y - outer_in_space, firstDLocation.Z), firstDLocation, 16f, 1f, 5, "left");
DoorRectangle.writeDimension(dxf, firstDLocation, new DLocation(firstDLocation.X, firstDLocation.Y + firstPictureInfo.topViewFirstDistance, firstDLocation.Z), 16f, 1f, 8, "left");
DoorRectangle.writeDimension(dxf, new DLocation(firstDLocation.X, firstDLocation.Y + firstPictureInfo.topViewFirstDistance, firstDLocation.Z), new DLocation(firstDLocation.X, firstDLocation.Y + firstPictureInfo.topViewSecondDistance, firstDLocation.Z), 16f, 1f, 8, "left");
//top
DLocation lastDLocation = storeDLocationList.ElementAt(storeDLocationList.Count - 1);
DoorRectangle.writeDimension(dxf, new DLocation(firstDLocation.X, firstDLocation.Y + height, firstDLocation.Z), new DLocation(lastDLocation.X, lastDLocation.Y + height, firstDLocation.Z), 16f, 1f, 10, "top");
//right
PictureBoxInfo lastPictureInfo = imageNameList.ElementAt(imageNameList.Count - 1);
DoorRectangle.writeDimension(dxf, new DLocation(lastDLocation.X, lastDLocation.Y + lastPictureInfo.topViewFirstDistance, firstDLocation.Z), new DLocation(lastDLocation.X, lastDLocation.Y + lastPictureInfo.topViewSecondDistance, firstDLocation.Z), 16f, 1f, 5f, "right");
DoorRectangle.writeDimension(dxf, new DLocation(lastDLocation.X, lastDLocation.Y, firstDLocation.Z), new DLocation(lastDLocation.X, lastDLocation.Y + lastPictureInfo.topViewFirstDistance, firstDLocation.Z), 16f, 1f, 5f, "right");
DoorRectangle.writeDimension(dxf, new DLocation(lastDLocation.X, lastDLocation.Y, firstDLocation.Z), new DLocation(lastDLocation.X, lastDLocation.Y + height, firstDLocation.Z), 16f, 1f, 10f, "right");
DoorRectangle.writeDimension(dxf, new DLocation(lastDLocation.X, lastDLocation.Y - BaseRail.baseRail, firstDLocation.Z), new DLocation(lastDLocation.X, lastDLocation.Y, firstDLocation.Z), 16f, 1f, 10f, "right");
DoorRectangle.writeDimension(dxf, new DLocation(lastDLocation.X, lastDLocation.Y - BaseRail.baseRail, firstDLocation.Z), new DLocation(lastDLocation.X, lastDLocation.Y + height + outer_in_space, firstDLocation.Z), 16f, 1f, 14f, "right");
}
//第二层
else
{
//画标注
PictureBoxInfo firstPictureInfo = imageNameList.ElementAt(0);
DLocation firstDLocation = storeDLocationList.ElementAt(0);
DoorRectangle.writeDimension(dxf, firstDLocation, new DLocation(firstDLocation.X, firstDLocation.Y + firstPictureInfo.topViewFirstDistance, firstDLocation.Z), 16f, 1f, 8, "left");
DoorRectangle.writeDimension(dxf, new DLocation(firstDLocation.X, firstDLocation.Y + firstPictureInfo.topViewFirstDistance, firstDLocation.Z), new DLocation(firstDLocation.X, firstDLocation.Y + firstPictureInfo.topViewSecondDistance, firstDLocation.Z), 16f, 1f, 8, "left");
//right
DLocation lastDLocation = storeDLocationList.ElementAt(storeDLocationList.Count - 1);
PictureBoxInfo lastPictureInfo = imageNameList.ElementAt(imageNameList.Count - 1);
DoorRectangle.writeDimension(dxf, new DLocation(lastDLocation.X, lastDLocation.Y + lastPictureInfo.topViewFirstDistance, firstDLocation.Z), new DLocation(lastDLocation.X, lastDLocation.Y + lastPictureInfo.topViewSecondDistance, firstDLocation.Z), 16f, 1f, 5f, "right");
DoorRectangle.writeDimension(dxf, new DLocation(lastDLocation.X, lastDLocation.Y, firstDLocation.Z), new DLocation(lastDLocation.X, lastDLocation.Y + lastPictureInfo.topViewFirstDistance, firstDLocation.Z), 16f, 1f, 5f, "right");
}
}
/// <summary>
/// 门把手绘制
/// </summary>
/// <param name="dxf"></param>
/// <param name="DLocation"></param>
public static void Draw(DxfModel dxf, DLocation DLocation)
{
double factor = 0.05f;
double distance = 30;
//底部小圆的圆心
Point3D sDxfCircle = new Point3D(DLocation.X + 10 * factor, DLocation.Y, DLocation.Z);
//上部同心圆圆心
Point3D bDxfCircle = new Point3D(DLocation.X + 10 * factor, DLocation.Y + 5 * factor + distance*factor, DLocation.Z);
double alpha = Math.Asin(3 / distance);
double beta = Math.Acos(0.8);
Point3D v1 = new Point3D(
DLocation.X + 10 * factor - double.Parse((5 * factor * Math.Cos(alpha)).ToString()),
DLocation.Y + 5 * factor - double.Parse((5 * factor * Math.Sin(alpha)).ToString()),
DLocation.Z);
Point3D v2 = new Point3D(
DLocation.X + 10 * factor + double.Parse((5 * factor * Math.Cos(alpha)).ToString()),
DLocation.Y + 5 * factor - double.Parse((5 * factor * Math.Sin(alpha)).ToString()),
DLocation.Z);
Point3D v4 = new Point3D(
DLocation.X + 10 * factor -double.Parse((8*factor* Math.Cos(alpha)).ToString()),
DLocation.Y + 5 * factor + distance * factor - double.Parse((8 * factor * Math.Sin(alpha)).ToString()),
DLocation.Z
);
Point3D v5 = new Point3D(
DLocation.X + 10 * factor + double.Parse((8*factor*Math.Cos(alpha)).ToString()),
DLocation.Y + 5 * factor + distance * factor - double.Parse((8 * factor * Math.Sin(alpha)).ToString()),
DLocation.Z
);
DxfLine DxfLine14 = new DxfLine(v1, v4);
dxf.Entities.Add(DxfLine14);
DxfLine DxfLine25 = new DxfLine(v2, v5);
dxf.Entities.Add(DxfLine25);
//DxfArc
DxfArc DxfArc = new DxfArc(
new Point3D(DLocation.X + 10 * factor, DLocation.Y + 5 * factor, DLocation.Z),
5 * factor, Convert.ToInt32(180 + alpha * 180 / Math.PI), Convert.ToInt32(360 - alpha * 180 / Math.PI));
dxf.Entities.Add(DxfArc);
//DxfArcup
DxfArc DxfArcup = new DxfArc(
new Point3D(DLocation.X + 10 * factor, DLocation.Y + 5 * factor + distance * factor, DLocation.Z),
8 * factor, Convert.ToInt32(-alpha * 180 / Math.PI), Convert.ToInt32(180 + alpha * 180 / Math.PI));
dxf.Entities.Add(DxfArcup);
//DxfArcround
DxfArc DxfArcround = new DxfArc(
new Point3D(DLocation.X + 10 * factor, DLocation.Y + 5 * factor + distance * factor, DLocation.Z),
10 * factor,
Convert.ToInt32(-(alpha +beta) * 180 / Math.PI),
Convert.ToInt32(180 + (alpha +beta) * 180 / Math.PI));
dxf.Entities.Add(DxfArcround);
//DxfCircle
Point3D centerWCS = new Point3D(DLocation.X+10*factor, DLocation.Y+5*factor+distance*factor, DLocation.Z);
DxfCircle DxfCircle = new DxfCircle((Point3D)centerWCS, 7 * factor);
dxf.Entities.Add(DxfCircle);
//上部同心圆圆心
Point3D t1 = new Point3D(
DLocation.X + 8 * factor,
DLocation.Y + 5 * factor + (distance - 7) * factor * 0.7f,
DLocation.Z);
Point3D t2 = new Point3D(
DLocation.X + 8 * factor,
DLocation.Y + 5 * factor + (distance - 7) * factor * 0.5f,
DLocation.Z);
Point3D t3 = new Point3D(
DLocation.X + 8 * factor,
DLocation.Y + 5 * factor + (distance - 7) * factor * 0.3f,
DLocation.Z);
Point3D t4 = new Point3D(
DLocation.X + 8 * factor,
DLocation.Y + 5 * factor + (distance - 7) * factor * 0.1f,
DLocation.Z);
//DxfText
DxfText DxfText1 = new DxfText("A", t1, 0.2f);
dxf.Entities.Add(DxfText1);
//DxfText
DxfText DxfText2 = new DxfText("A", t2, 0.2f);
dxf.Entities.Add(DxfText2);
//DxfText
DxfText DxfText3 = new DxfText("O", t3, 0.2f);
dxf.Entities.Add(DxfText3);
//DxfText
DxfText DxfText4 = new DxfText("N", t4, 0.2f);
dxf.Entities.Add(DxfText4);
}
/// <summary>
/// 计算俯视图下一个坐标使用
/// </summary>
/// <param name="pList"></param>
/// <returns></returns>
public static DLocation getTopViewNextStartLocation(List<Point3D> pList)
{
double minY = Double.MaxValue;
double minX = Double.MinValue;
DLocation nextStartLocation = new DLocation();
for (int i = 0; i < pList.Count; i++)
{
if (Math.Round(minY*10000)/10000 >= Math.Round(pList[i].Y*10000)/10000)
{
if (Math.Round(minX*10000/10000) <=Math.Round(pList[i].X*10000)/10000)
{
minY = pList[i].Y;
minX = pList[i].X;
nextStartLocation.X = pList[i].X;
nextStartLocation.Y = pList[i].Y;
nextStartLocation.Z = pList[i].Z;
}
}
}
return nextStartLocation;
}
//画完整的带支架的设备矩形框
public static void writeWholeMachine(DxfModel dxf, DLocation DLocation, string[] DxfText, double height, double width, double outer_mid_space, double outer_in_space, double barHeight, double barWidth,string upOrDownLayer)
{
writeDoorRectangle(dxf,DLocation,DxfText,height,width,outer_mid_space,outer_in_space);
//画小支架
if (upOrDownLayer.Equals("downLayer"))
{
//左下角
writeOuterDoorRectangle(dxf, new DLocation(DLocation.X, DLocation.Y - outer_in_space, DLocation.Z), outer_in_space, outer_in_space - outer_mid_space);
//右下角
writeOuterDoorRectangle(dxf, new DLocation(DLocation.X + width + outer_mid_space - outer_in_space, DLocation.Y - outer_in_space, DLocation.Z), outer_in_space, outer_in_space - outer_mid_space);
}
}
/// <summary>
/// 负责计算俯视图的函数
/// </summary>
/// <param name="sourceModel"></param>
/// <returns></returns>
public static DLocation getTopViewRelativeStartLocation(DxfModel sourceModel)
{
DLocation relativeStartLocation = new DLocation();
double minX = Double.MaxValue;
double minY = Double.MaxValue;
foreach (DxfEntity entity in sourceModel.Entities)
{
switch (entity.EntityType)
{
case "LINE":
{
DxfLine dxfLine = (DxfLine)entity;
if (Math.Round(dxfLine.Start.Y*10000)/10000 == Math.Round(dxfLine.End.Y*10000)/10000)
{
if (Math.Round(minX*10000)/10000 >= Math.Round(dxfLine.Start.X*10000)/10000)
{
if (Math.Round(minY*10000)/10000 >= Math.Round(dxfLine.Start.Y*10000)/10000)
{
minY = dxfLine.Start.Y;
minX = dxfLine.Start.X;
relativeStartLocation.X = dxfLine.Start.X;
relativeStartLocation.Y = dxfLine.Start.Y;
relativeStartLocation.Z = dxfLine.Start.Z;
}
}
}
//消除画图人员错误绘制
if (Math.Round(dxfLine.Start.Y * 10000) / 10000 == Math.Round(dxfLine.End.Y * 10000) / 10000)
{
if (Math.Round(minX * 10000) / 10000 >= Math.Round(dxfLine.End.X * 10000) / 10000)
{
if (Math.Round(minY * 10000) / 10000 >= Math.Round(dxfLine.End.Y * 10000) / 10000)
{
minX = dxfLine.End.X;
minY = dxfLine.End.Y;
relativeStartLocation.X = dxfLine.End.X;
relativeStartLocation.Y = dxfLine.End.Y;
relativeStartLocation.Z = dxfLine.End.Z;
}
}
}
}; continue;
}
}
return relativeStartLocation;
}
/// <summary>
/// 圆圈
/// </summary>
/// <param name="doc"></param>
/// <param name="DLocation"></param>
/// <param name="radius"></param>
public static void writeCirle(DxfModel doc, DLocation DLocation,double radius)
{
DxfCircle dxfCirle = new DxfCircle(new Point3D(DLocation.X, DLocation.Y, DLocation.Z), radius);
doc.Entities.Add(dxfCirle);
}
//画完整的一个单门（门闩，把手，支架）
/// <summary>
/// fta等，sfd,pea,pec,rfa
/// </summary>
/// <param name="dxf"></param>
/// <param name="DLocation"></param>
/// <param name="DxfText"></param>
/// <param name="height"></param>
/// <param name="width"></param>
/// <param name="outer_mid_space"></param>
/// <param name="outer_in_space"></param>
/// <param name="barHeight"></param>
/// <param name="barWidth"></param>
/// <param name="upOrDownLayer"></param>
public static void writeWholeSingleDoor(DxfModel dxf, DLocation DLocation, string[] DxfText, double height, double width, double outer_mid_space, double outer_in_space, double barHeight, double barWidth,string upOrDownLayer)
{
writeDoorBarRectangle(dxf, DLocation, DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
double downLeftX=DLocation.X+outer_mid_space-barWidth/2+(outer_in_space-outer_mid_space)/2;
double downLeftY=DLocation.Y + height / 4;
writeRepresentDoorBarRectangle(dxf, new DLocation(downLeftX,downLeftY , DLocation.Z), DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
double upLeftX = downLeftX;
double upLeftY = DLocation.Y + 3 * height / 4 - barHeight;
writeRepresentDoorBarRectangle(dxf, new DLocation(upLeftX,upLeftY , DLocation.Z), DxfText, height, width, outer_mid_space, outer_in_space, barHeight, barWidth);
//画小支架
if (upOrDownLayer.Equals("downLayer"))
{
//左下角
writeOuterDoorRectangle(dxf, new DLocation(DLocation.X, DLocation.Y - outer_in_space, DLocation.Z), outer_in_space, outer_in_space - outer_mid_space);
//右下角
writeOuterDoorRectangle(dxf, new DLocation(DLocation.X + width + outer_mid_space - outer_in_space, DLocation.Y - outer_in_space, DLocation.Z), outer_in_space, outer_in_space - outer_mid_space);
}
//画门把手
Handle.Draw(dxf, new DLocation(DLocation.X + 3 * width / 4, DLocation.Y + 3 * height / 4 - barHeight, DLocation.Z));
Handle.Draw(dxf, new DLocation(DLocation.X + 3 * width / 4, DLocation.Y + height / 4, DLocation.Z));
}
/// <summary>
/// 单独用来处理frame的函数
/// </summary>
/// <param name="entity"></param>
/// <param name="location"></param>
/// <param name="relativeStartLocation"></param>
/// <returns></returns>
public static DxfEntity getFrameEntity(DxfEntity entity, DLocation location, DLocation relativeStartLocation,double increaseWidth)
{
switch (entity.EntityType)
{
case "LINE":
{
DxfLine dxfLine = (DxfLine)entity;
double lineLenght = dxfLine.End.X - dxfLine.Start.X;
double lineHeight = dxfLine.End.Y - dxfLine.Start.Y;
if (Math.Round(dxfLine.Start.Y * 1000) / 1000 == Math.Round(dxfLine.End.Y * 1000) / 1000)
{
//消除绘图人员的语法错误
if (dxfLine.Start.X > dxfLine.End.X)
{
dxfLine.Start = new Point3D(dxfLine.Start.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance + increaseWidth, dxfLine.Start.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfLine.ZAxis.Z);
dxfLine.End = new Point3D(dxfLine.Start.X + lineLenght, dxfLine.Start.Y + lineHeight, location.Z);
}
else
{
dxfLine.Start = new Point3D(dxfLine.Start.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfLine.Start.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfLine.ZAxis.Z);
dxfLine.End = new Point3D(dxfLine.Start.X + lineLenght+increaseWidth, dxfLine.Start.Y + lineHeight, location.Z);
}
}
else
{
if (Math.Round(dxfLine.Start.X * 10) / 10 == Math.Round(frameLastLineX * 10) / 10)
{
double tempX = dxfLine.Start.X;
dxfLine.Start = new Point3D(dxfLine.Start.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance+increaseWidth/2, dxfLine.Start.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfLine.ZAxis.Z);
//因为此处的dxfLine.Start.x==dxfLineEnd.x所以不需要+increaseWidth
dxfLine.End = new Point3D(dxfLine.Start.X + lineLenght, dxfLine.Start.Y + lineHeight, location.Z);
}
else
{
dxfLine.Start = new Point3D(dxfLine.Start.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfLine.Start.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfLine.ZAxis.Z);
dxfLine.End = new Point3D(dxfLine.Start.X + lineLenght, dxfLine.Start.Y + lineHeight, location.Z);
}
}
return dxfLine;
};
case "TEXT":
{
DxfText dxfText = (DxfText)entity;
//解决乱码问题
dxfText.Style = textStyle;
TextValue textValue = new TextValue();
if (dxfText.Text.Equals("产品代码:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X,dxfText.AlignmentPoint1.Y,dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X+4*RelativeDistance.width,textValue.textPosition.Y,textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("项目名称:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 4 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("设备描述:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 4 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("买方:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 2 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("订单号:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 3 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("买方联系人:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 5 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("易龙销售:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 4 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("软件序列号:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 5 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("系列号:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 3 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else if (dxfText.Text.Equals("时间:"))
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance + increaseWidth / 2, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
textValue.text = dxfText.Text;
textValue.height = dxfText.Height;
textValue.textPosition = new DLocation(dxfText.AlignmentPoint1.X, dxfText.AlignmentPoint1.Y, dxfText.AlignmentPoint1.Z);
textValue.valuePosition = new DLocation(textValue.textPosition.X + 2 * RelativeDistance.width, textValue.textPosition.Y, textValue.textPosition.Z);
textValueList.Add(textValue);
}
else
{
dxfText.AlignmentPoint1 = new Point3D(dxfText.AlignmentPoint1.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfText.AlignmentPoint1.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfText.AlignmentPoint1.Z);
dxfText.AlignmentPoint2 = dxfText.AlignmentPoint1;
}
return dxfText;
}
case "ELLIPSE":
{
DxfEllipse dxfEllipse = (DxfEllipse)entity;
dxfEllipse.Center = new Point3D(dxfEllipse.Center.X - relativeStartLocation.X + location.X-RelativeDistance.xDistance, dxfEllipse.Center.Y - relativeStartLocation.Y + location.Y-RelativeDistance.yDistance, dxfEllipse.Center.Z);
return dxfEllipse;
}
case "LWPOLYLINE":
{
DxfLwPolyline dxfLwPolyLine = (DxfLwPolyline)entity;
int len = dxfLwPolyLine.Vertices.Count;
//获得Frame最右边的X值
Point2D rightPoint2d = getFrameRightX(dxfLwPolyLine.Vertices);
for (int i = 0; i < len; i++)
{
if (isPolyLinePoint(rightPoint2d, dxfLwPolyLine.Vertices[i].Position))
{
dxfLwPolyLine.Vertices[i].Position = new Point2D(dxfLwPolyLine.Vertices[i].Position.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance+increaseWidth, dxfLwPolyLine.Vertices[i].Position.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance);
}
else
{
dxfLwPolyLine.Vertices[i].Position = new Point2D(dxfLwPolyLine.Vertices[i].Position.X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfLwPolyLine.Vertices[i].Position.Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance);
}
}
return dxfLwPolyLine;
}
case "SOLID":
{
DxfSolid dxfSolid = (DxfSolid)entity;
int len = dxfSolid.Points.Count;
for (int i = 0; i < len;i++ )
{
//可能会出问题
if(i==1||i==3)
dxfSolid.Points[i] = new Point3D(dxfSolid.Points[i].X - relativeStartLocation.X + location.X - RelativeDistance.xDistance+increaseWidth, dxfSolid.Points[i].Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfSolid.Points[i].Z);
else
dxfSolid.Points[i] = new Point3D(dxfSolid.Points[i].X - relativeStartLocation.X + location.X - RelativeDistance.xDistance, dxfSolid.Points[i].Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfSolid.Points[i].Z);
}
return dxfSolid;
}
case "SPLINE":
{
DxfSpline dxfSpline = (DxfSpline)entity;
int len=dxfSpline.ControlPoints.Count;
for (int i = 0; i < len;i++ )
{
dxfSpline.ControlPoints[i] = new Point3D(dxfSpline.ControlPoints[i].X - relativeStartLocation.X + location.X- RelativeDistance.xDistance, dxfSpline.ControlPoints[i].Y - relativeStartLocation.Y + location.Y - RelativeDistance.yDistance, dxfSpline.ControlPoints[i].Z);
}
return dxfSpline;
}
default: return entity;
}
}
public TopViewConfigure getTopViewConfigure(List<PictureBoxInfo> pictureBoxNameList, DxfModel dxf,
DLocation DLocation)
{
return new TopViewConfigure(pictureBoxNameList, dxf,
null, 50.0d, 18.0d, 2.0d, 2.86f, 2.0d, 2.0d);
}
/// <summary>
/// 画phb类型的，单门只含有两个cirle的完整门窗,clm也是这个类型
/// </summary>
/// <param name="doc"></param>
/// <param name="DLocation"></param>
/// <param name="DxfText"></param>
/// <param name="height"></param>
/// <param name="width"></param>
/// <param name="outer_mid_space"></param>
/// <param name="outer_in_space"></param>
public static void writeWholeSingleDoorTwoCirle(DxfModel doc, DLocation DLocation, string[] DxfText, double height, double width, double outer_mid_space, double outer_in_space)
{
writeDoorRectangle(doc, DLocation, DxfText, height, width, outer_mid_space, outer_in_space);
//两个个小圈
//底部
writeCirle(doc, new DLocation(DLocation.X + width * 3 / 4, DLocation.Y + 2 * outer_in_space, DLocation.Z), (outer_in_space - outer_mid_space) / 2);
//顶部
writeCirle(doc, new DLocation(DLocation.X + width / 2, DLocation.Y + height - 2 * outer_in_space, DLocation.Z), (outer_in_space - outer_mid_space) / 2);
}
/// <summary>
/// 绘制订单信息块
/// </summary>
/// <param name="dxf"></param>
/// <param name="DLocation"></param>
/// <param name="boxWidth"></param>
/// <param name="configurations"></param>
public static void Draw(DxfModel dxf, DLocation DLocation,double boxWidth, OrderEntity orderEntity)
{
double factor = 0.6f;
Point3D v1 = new Point3D(DLocation.X,DLocation.Y,DLocation.Z);
Point3D v2 = new Point3D(DLocation.X + boxWidth, DLocation.Y, DLocation.Z);
Point3D v3 = new Point3D(DLocation.X + boxWidth, DLocation.Y + 40.0d * factor, DLocation.Z);
Point3D v4 = new Point3D(DLocation.X, DLocation.Y + 40.0d * factor, DLocation.Z);
Point3D v5 = new Point3D(DLocation.X, DLocation.Y + 10.0d * factor, DLocation.Z);
Point3D v6 = new Point3D(DLocation.X + boxWidth / 4, DLocation.Y + 10.0d * factor, DLocation.Z);
Point3D v7 = new Point3D(DLocation.X + boxWidth / 2, DLocation.Y + 10.0d * factor, DLocation.Z);
Point3D v8 = new Point3D(DLocation.X + boxWidth * 3 / 4, DLocation.Y + 10.0d * factor, DLocation.Z);
Point3D v9 = new Point3D(DLocation.X + boxWidth * 7 / 8, DLocation.Y + 10.0d * factor, DLocation.Z);
Point3D v10 = new Point3D(DLocation.X + boxWidth / 4, DLocation.Y + 20.0d * factor, DLocation.Z);
Point3D v11 = new Point3D(DLocation.X + boxWidth / 2, DLocation.Y + 20.0d * factor, DLocation.Z);
Point3D v12 = new Point3D(DLocation.X + boxWidth * 3 / 4, DLocation.Y + 20.0d * factor, DLocation.Z);
Point3D v13 = new Point3D(DLocation.X + boxWidth * 7 / 8, DLocation.Y + 20.0d * factor, DLocation.Z);
Point3D v14 = new Point3D(DLocation.X + boxWidth, DLocation.Y + 20.0d * factor, DLocation.Z);
Point3D v15 = new Point3D(DLocation.X + boxWidth / 4, DLocation.Y + 40.0d * factor, DLocation.Z);
Point3D v16 = new Point3D(DLocation.X + boxWidth * 3 / 4, DLocation.Y + 40.0d * factor, DLocation.Z);
Point3D v17 = new Point3D(DLocation.X + boxWidth / 4, DLocation.Y, DLocation.Z);
Point3D v18 = new Point3D(DLocation.X + boxWidth / 2, DLocation.Y, DLocation.Z);
Point3D v19 = new Point3D(DLocation.X + boxWidth * 3 / 4, DLocation.Y, DLocation.Z);
Point3D v20 = new Point3D(DLocation.X + boxWidth, DLocation.Y + 10.0d * factor, DLocation.Z);
//横向四道
DxfLine DxfLine12 = new DxfLine(v1, v2);
dxf.Entities.Add(DxfLine12);
DxfLine DxfLine520 = new DxfLine(v5, v20);
dxf.Entities.Add(DxfLine520);
DxfLine DxfLine1014 = new DxfLine(v10, v14);
dxf.Entities.Add(DxfLine1014);
DxfLine DxfLine43 = new DxfLine(v4, v3);
dxf.Entities.Add(DxfLine43);
//纵向6道
DxfLine DxfLine41 = new DxfLine(v4, v1);
dxf.Entities.Add(DxfLine41);
DxfLine DxfLine1517 = new DxfLine(v15, v17);
dxf.Entities.Add(DxfLine1517);
DxfLine DxfLine1118 = new DxfLine(v11, v18);
dxf.Entities.Add(DxfLine1118);
DxfLine DxfLine1619 = new DxfLine(v16, v19);
dxf.Entities.Add(DxfLine1619);
DxfLine DxfLine139 = new DxfLine(v13, v9);
dxf.Entities.Add(DxfLine139);
DxfLine DxfLine32= new DxfLine(v3, v2);
dxf.Entities.Add(DxfLine32);
//文字
Point3D vt1 = new Point3D(v1.X + 1.0d, v1.Y + 2.5f, v1.Z);
DxfText t1 = new DxfText("Celebrity 1.0.0", vt1, 2.0d);
dxf.Entities.Add(t1);
Point3D vt2 = new Point3D(v17.X + 1.0d, v17.Y + 2.5f, v1.Z);
DxfText t2 = new DxfText("PREPARER: "+orderEntity.Preparer, vt2, 2.0d);
dxf.Entities.Add(t2);
Point3D vt3 = new Point3D(v18.X + 1.0d, v18.Y + 2.5f, v1.Z);
DxfText t3 = new DxfText("ENGINEER: "+orderEntity.Engineer, vt3, 2.0d);
dxf.Entities.Add(t3);
Point3D vt4 = new Point3D(v19.X + 1.0d, v19.Y + 2.5f, v1.Z);
DxfText t4 = new DxfText("SHIP ORDER NO: "+orderEntity.ShipOrderNo, vt4, 2.0d);
dxf.Entities.Add(t4);
Point3D vt5 = new Point3D(v4.X + 1.0d, v10.Y + 2.5f, v1.Z);
DxfText t5= new DxfText(" AAON COIL PRODUCTS inc.", vt5, 3.0d);
dxf.Entities.Add(t5);
Point3D vt6 = new Point3D(v5.X + 1.0d, v5.Y + 2.5f, v1.Z);
DxfText t6 = new DxfText("LONGVIEW TEXAS", vt6, 2.0d);
dxf.Entities.Add(t6);
Point3D vt7 = new Point3D(v6.X + 1.0d, v6.Y + 2.5f, v1.Z);
DxfText t7 = new DxfText("PURCHASER: " + orderEntity.Purchaser, vt7, 2.0d);
dxf.Entities.Add(t7);
Point3D vt8 = new Point3D(v7.X + 1.0d, v7.Y + 2.5f, v1.Z);
DxfText t8 = new DxfText("PURCHASE ORDER: " + orderEntity.PurchaseOrder, vt8, 2.0d);
dxf.Entities.Add(t8);
Point3D vt9 = new Point3D(v8.X + 1.0d, v8.Y + 2.5f, v1.Z);
DxfText t9 = new DxfText("SERIAL NO: " + orderEntity.SeriaNo, vt9, 2.0d);
dxf.Entities.Add(t9);
Point3D vt10 = new Point3D(v9.X + 1.0d, v9.Y + 2.5f, v1.Z);
DxfText t10 = new DxfText("DATE: "+DateTime.Now.ToShortDateString(), vt10, 2.0d);
dxf.Entities.Add(t10);
Point3D vt11 = new Point3D(v15.X + 1.0d, v15.Y - 7.5f, v1.Z);
DxfText t11 = new DxfText("JOB NAME:", vt11, 2.0d);
dxf.Entities.Add(t11);
Point3D vt12 = new Point3D(v10.X + 10.0d, v10.Y + 2.5f, v1.Z);
DxfText t12 = new DxfText(orderEntity.JobName, vt12, 2.0d);
dxf.Entities.Add(t12);
Point3D vt13 = new Point3D(v16.X + 1.0d, v16.Y - 7.5f, v1.Z);
DxfText t13 = new DxfText("UNIT TAG:", vt13, 2.0d);
dxf.Entities.Add(t13);
Point3D vt14 = new Point3D(v12.X + 20.0d, v12.Y + 2.5f, v1.Z);
DxfText t14 = new DxfText(orderEntity.UnitTag, vt14, 2.0d);
dxf.Entities.Add(t14);
}
/// <summary>
/// 过滤掉不符合条件的底部部分，是底部为平整的直线实体，方便计算最左边的顶点
/// </summary>
/// <param name="sourceModel"></param>
/// <returns></returns>
public static DxfModel getFilterBottomNotLineDxfModel(DxfModel sourceModel)
{
DLocation relativeStartLocation = new DLocation();
double minX = Double.MaxValue;
foreach (DxfEntity entity in sourceModel.Entities)
{
switch (entity.EntityType)
{
case "LINE":
{
DxfLine dxfLine = (DxfLine)entity;
if (Math.Round(dxfLine.Start.Y * 10000) / 10000 == Math.Round(dxfLine.End.Y * 10000) / 10000)
{
if (Math.Round(minX * 10000) / 10000 >= Math.Round(dxfLine.Start.X * 10000) / 10000)
{
minX = dxfLine.Start.X;
}
}
//消除画图人员错误绘制
if (Math.Round(dxfLine.Start.Y * 10000) / 10000 == Math.Round(dxfLine.End.Y * 10000) / 10000)
{
if (Math.Round(minX * 10000) / 10000 >= Math.Round(dxfLine.End.X * 10000) / 10000)
{
minX = dxfLine.End.X;
}
}
}; continue;
}
}
//将符合条件的entity加入到DxfModel中
DxfModel filterModel = new DxfModel();
foreach(DxfEntity entity in sourceModel.Entities)
{
switch(entity.EntityType)
{
case "LINE":
{
DxfLine dxfLine = (DxfLine)entity;
//程序员绘画不规则造成
if (Math.Round(dxfLine.Start.X * 10000) / 10000 == Math.Round(minX*10000)/10000||Math.Round(dxfLine.End.X*10000)/10000==Math.Round(minX*10000)/10000)
{
filterModel.Entities.Add(dxfLine);
}
}continue;
}
}
return filterModel;
}