//===========================================================================================
/// <summary>
/// generates a response based on any errors that occur in one of the Preprocess data methods
/// </summary>
/// <param name="errorCode">The error code that was set in the Preprocess data method</param>
/// <param name="originalResponse">The response before calling the Preprocess data method</param>
/// <returns>The response</returns>
//===========================================================================================
internal virtual string GetPreprocessDataErrorResponse(ErrorCodes errorCode, string originalResponse)
{
return originalResponse;
}
//==================================================================================================
/// <summary>
/// Indicates that there's a pending error that hasn't been thrown yet
/// and should be by the next AOSCAN messasge or WriteScanData call
/// </summary>
/// <param name="errorCode">The pending error code</param>
//==================================================================================================
internal void SetPendingOutputScanError(ErrorCodes errorCode)
{
PendingOutputScanError = m_driverInterface.ErrorCode;
}
public double[,] ReadScanData(int samplesRequested, int timeOut, out ErrorCodes errorCode)
{
Monitor.Enter(m_readDataLock);
int samplesToRead;
if (PendingInputScanError != ErrorCodes.NoErrors && PendingInputScanError != ErrorCodes.DataOverrun) {
errorCode = PendingInputScanError;
PendingInputScanError = ErrorCodes.NoErrors;
Monitor.Exit(m_readDataLock);
return null;
}
if (samplesRequested == 0) {
errorCode = ErrorCodes.InputScanReadCountIsZero;
Monitor.Exit(m_readDataLock);
return null;
}
double[,] userScanData = null;
int channelCount = m_driverInterface.CriticalParams.AiChannelCount;
int byteRatio = m_driverInterface.CriticalParams.DataInXferSize;
int bytesRequested = samplesRequested * byteRatio * channelCount;
if (bytesRequested > m_driverInterface.InputScanBuffer.Length) {
errorCode = ErrorCodes.RequestedReadSamplesGreaterThanBufferSize;
Monitor.Exit(m_readDataLock);
return null;
}
if (m_driverInterface.InputScanStatus == ScanState.Idle || m_driverInterface.InputScanStatus == ScanState.Overrun) {
int availableSamplesPerChannel = (int)(m_driverInterface.InputScanCount - m_driverInterface.InputSamplesReadPerChannel);
samplesToRead = Math.Min(availableSamplesPerChannel, samplesRequested);
if (samplesToRead > 0) {
userScanData = new double[channelCount, samplesToRead];
// get the current read index
int readIndex = m_driverInterface.CurrentInputScanReadIndex;
// get a reference to the driver interface's internal read buffer
byte[] internalReadBuffer = m_driverInterface.InputScanBuffer;
//if (m_driverInterface.InputScanStatus == ScanState.Overrun)
// DebugLogger.WriteLine("Reading {0} samples (Overrun - Thread {1})", samplesToRead, Thread.CurrentThread.ManagedThreadId);
//else
// DebugLogger.WriteLine("Reading {0} samples (Stopped - Thread {1})", samplesToRead, Thread.CurrentThread.ManagedThreadId);
// copy the data to the inpuScanData array
Ai.CopyScanData(internalReadBuffer, userScanData, ref readIndex, samplesToRead);
// update the current read index
m_driverInterface.CurrentInputScanReadIndex = readIndex;
}
errorCode = m_driverInterface.ErrorCode;
Monitor.Exit(m_readDataLock);
return userScanData;
}
errorCode = m_driverInterface.ErrorCode;
// first check the driver interface error code
if (errorCode == ErrorCodes.NoErrors) {
if (!m_driverInterface.CriticalParams.TriggerRearmEnabled &&
m_driverInterface.CriticalParams.InputSampleMode == SampleMode.Finite) {
if (samplesRequested > m_driverInterface.CriticalParams.InputScanSamples)
errorCode = ErrorCodes.TooManySamplesRequested;
if ((ulong)m_driverInterface.CriticalParams.InputScanSamples == m_driverInterface.InputSamplesReadPerChannel) {
errorCode = ErrorCodes.NoMoreInputSamplesAvailable;
}
}
if (errorCode == ErrorCodes.NoErrors) {
// wait until there is enough fresh data to read
// if the device went idle then samples to read may be less than samples requested
samplesToRead = m_driverInterface.WaitForData(samplesRequested, timeOut);
// check the error code again in case a data overrun occurred
if (m_driverInterface.ErrorCode == ErrorCodes.NoErrors) {
if (samplesToRead > 0) {
userScanData = new double[channelCount, samplesRequested];
// get the current read index
int readIndex = m_driverInterface.CurrentInputScanReadIndex;
// get a reference to the driver interface's internal read buffer
byte[] internalReadBuffer = m_driverInterface.InputScanBuffer;
// copy the data to the inpuScanData array
Ai.CopyScanData(internalReadBuffer, userScanData, ref readIndex, samplesToRead);
// update the current read index
m_driverInterface.CurrentInputScanReadIndex = readIndex;
} else {
errorCode = ErrorCodes.NoMoreInputSamplesAvailable;
}
} else {
errorCode = m_driverInterface.ErrorCode;
}
if (!m_driverInterface.CriticalParams.TriggerRearmEnabled &&
m_driverInterface.CriticalParams.InputSampleMode == SampleMode.Finite) {
if ((ulong)m_driverInterface.CriticalParams.InputScanSamples == m_driverInterface.InputScanCount) {
m_driverInterface.WaitForIdle();
}
}
}
}
Monitor.Exit(m_readDataLock);
return userScanData;
}
//==============================================================================
/// <summary>
/// Creates an Exception object based on the error code
/// </summary>
/// <param name="deviceMessage">The message that was sent to the device</param>
/// <param name="errorCode">The error that occurred</param>
/// <returns>The Exception</returns>
//==============================================================================
internal DaqException ResolveException(string deviceMessage, ErrorCodes errorCode)
{
DaqException daqException;
string errorMessage = GetErrorMessage(errorCode);
if (errorCode == ErrorCodes.InvalidMessage)
errorMessage += String.Format(" [{0}]", deviceMessage);
daqException = new DaqException(errorMessage, errorCode);
return daqException;
}
//==============================================================================
/// <summary>
/// Creates an Exception object based on the error code
/// </summary>
/// <param name="errorCode">The error that occurred</param>
/// <param name="response">The last response</param>
/// <returns>The Exception</returns>
//==============================================================================
internal DaqException ResolveException(ErrorCodes errorCode, DaqResponse response)
{
DaqException daqException;
string errorMessage = GetErrorMessage(errorCode);
ErrorLevel level;
if (errorCode < ErrorCodes.DeviceNotResponding)
level = ErrorLevel.Warning;
else
level = ErrorLevel.Error;
daqException = new DaqException(this, errorMessage, errorCode, level, response);
return daqException;
}
//===========================================================================================
/// <summary>
/// Virtual method to preprocess a message
/// </summary>
/// <param name="message">The message to process</param>
/// <returns>True if the message is to be sent to the device, otherwise false</returns>
//===========================================================================================
internal virtual bool PreprocessMessage(ref string message, string messageType)
{
SendMessageToDevice = true;
if (message.Contains(Constants.EQUAL_SIGN) && message.Contains(Constants.QUERY.ToString())) {
m_apiMessageError = ErrorCodes.InvalidMessage;
SendMessageToDevice = false;
return SendMessageToDevice;
}
// first check if an Ai Cal is in progress by the cal thread id
// Cal is running if the cal thread id is non-zero
if (Ai != null && Ai.CalThreadId != 0 && Thread.CurrentThread.ManagedThreadId != Ai.CalThreadId) {
// if a calibration is running, then respond with device busy and
// don't send the message to the device
if (messageType != DaqComponents.AICAL && !message.Contains(DaqProperties.STATUS)) {
ApiResponse = new DaqResponse(PropertyValues.DEVICE_BUSY, double.NaN);
SendMessageToDevice = false;
return SendMessageToDevice;
}
}
// next check if an Ao Cal is in progress by the cal thread id
// Cal is running if the cal thread id is non-zero
if (Ao != null && Ao.CalThreadId != 0 && Thread.CurrentThread.ManagedThreadId != Ao.CalThreadId) {
// if a calibration is running, then respond with device busy and
// don't send the message to the device
if (messageType != DaqComponents.AOCAL && !message.Contains(DaqProperties.STATUS)) {
ApiResponse = new DaqResponse(PropertyValues.DEVICE_BUSY, double.NaN);
SendMessageToDevice = false;
return SendMessageToDevice;
}
}
if (messageType == DaqComponents.DEV) {
if (message.Contains(APIMessages.DEVPID)) {
ApiResponse = new DaqResponse(APIMessages.DEVPID.Remove(0, 1) + Constants.EQUAL_SIGN + m_deviceID.ToString(), (double)m_deviceID);
SendMessageToDevice = false;
return SendMessageToDevice;
}
if (message.Contains(DaqCommands.LOADCAPS)) {
LoadDeviceCaps(true);
if (Ai != null)
Ai.Initialize();
if (Ao != null)
Ao.Initialize();
if (Dio != null)
Dio.Initialize();
if (Ctr != null)
Ctr.Initialize();
if (Tmr != null)
Tmr.Initialize();
ApiResponse = new DaqResponse(DaqComponents.DEV + ":" + DaqCommands.LOADCAPS, Double.NaN);
SendMessageToDevice = false;
return SendMessageToDevice;
}
}
if (messageType == DaqComponents.AI ||
messageType == DaqComponents.AISCAN ||
messageType == DaqComponents.AITRIG ||
messageType == DaqComponents.AICAL ||
messageType == DaqComponents.AIQUEUE) {
if (Ai != null) {
m_apiMessageError = Ai.PreprocessMessage(ref message, messageType);
if (m_apiMessageError == ErrorCodes.NoErrors)
Ai.SetCriticalParams(message, messageType);
return SendMessageToDevice;
}
}
if (messageType == DaqComponents.AO || messageType == DaqComponents.AOSCAN || messageType == DaqComponents.AOCAL) {
if (Ao != null) {
m_apiMessageError = Ao.PreprocessMessage(ref message, messageType);
if (m_apiMessageError == ErrorCodes.NoErrors)
Ao.SetCriticalParams(message, messageType);
return SendMessageToDevice;
}
}
if (messageType == DaqComponents.DIO) {
if (Dio != null) {
m_apiMessageError = Dio.PreprocessMessage(ref message, messageType);
return SendMessageToDevice;
}
}
if (messageType == DaqComponents.CTR) {
if (Ctr != null) {
m_apiMessageError = Ctr.PreprocessMessage(ref message, messageType);
return SendMessageToDevice;
}
}
if (messageType == DaqComponents.TMR) {
if (Tmr != null) {
m_apiMessageError = Tmr.PreprocessMessage(ref message, messageType);
return SendMessageToDevice;
}
}
return true;
}
public void GenerateResFile(ArrayList files, string sTxtDir,
string sResDir, ErrorCodes errorCodeIn, string callingRoutine)
{
ErrorCodes errorCode = errorCodeIn;
LogFile.AddVerboseLine("*** Called GenerateResFile from " + callingRoutine);
while (true)
{
try
{
// release any locked files first
Icu.Cleanup();
// Call icu\tools\genrb.exe to compile res_index.txt, root.txt and XXX.txt
Process prc;
prc= new Process();
// genrb fails with quoted -i and -s arguments when the directory ends with backslash.
string sIcuResDir = m_icuBase + m_IcuData;
if (sIcuResDir.LastIndexOf("\\") == sIcuResDir.Length - 1)
sIcuResDir = sIcuResDir.Substring(0, sIcuResDir.Length - 1);
if (sTxtDir.LastIndexOf("\\") == sTxtDir.Length - 1)
sTxtDir = sTxtDir.Substring(0, sTxtDir.Length - 1);
if (sResDir.LastIndexOf("\\") == sResDir.Length - 1)
sResDir = sResDir.Substring(0, sResDir.Length - 1);
prc.StartInfo.FileName = m_icuBase + "tools\\genrb.exe ";
// Arguments need directories surrounded in double quotes to cover spaces in path.
StringBuilder bldr = new StringBuilder();
bldr.AppendFormat("-v -k -d \"{0}\" -i \"{1}\" ", sResDir, sIcuResDir);
bldr.AppendFormat("-s \"{0}\"", sTxtDir);
foreach (string FileName in files)
bldr.AppendFormat(" {0}", FileName.Substring(1 + FileName.LastIndexOf("\\")));
prc.StartInfo.Arguments = bldr.ToString();
prc.StartInfo.WindowStyle = ProcessWindowStyle.Hidden;
prc.StartInfo.WorkingDirectory = sTxtDir;
LogFile.AddLine(" GenerateResFile: <" + prc.StartInfo.Arguments + ">");
prc.Start();
prc.WaitForExit();
int ret;
ret = prc.ExitCode;
if (ret != 0)
{
// This should never happen anymore because we are generating the res files in
// the Icu34 directory then moving them to Icu34\icudt34l where the files may be locked.
// Now we are testing for locked files before we do any other file manipulation.
if (ret == 4 && RunSilent == false)
{
LogFile.AddLine(" File Access Error: asking user to retry or Cancel.");
// arguments to the MessageBox to ask user to retry or cancel
string message = InstallLanguageStrings.ksStopAllFwApps;
string caption = InstallLanguageStrings.ksInstallLanguageMsgCaption;
MessageBoxButtons buttons = MessageBoxButtons.RetryCancel;
MessageBoxIcon icon = MessageBoxIcon.Exclamation;
MessageBoxDefaultButton defButton = MessageBoxDefaultButton.Button1;
DialogResult result = MessageBox.Show(message, caption, buttons, icon, defButton);
if(result == DialogResult.Retry)
continue; // repeat
errorCode = ErrorCodes.CancelAccessFailure;
}
System.Console.WriteLine("GENRB returned error code " + ret.ToString());
System.Console.WriteLine(Error.Text(errorCode));
LogFile.AddErrorLine("GENRB returned error code " + ret.ToString());
foreach(string FileName in files)
System.Console.WriteLine(" " + FileName);
throw new LDExceptions(errorCode);
}
break;
}
catch(Exception e)
{
System.Diagnostics.Debug.WriteLine(e.Message);
throw new LDExceptions(errorCode, e.Message);
}
}
}
/// <summary>
/// Build an output file using the specified input file taking the action
/// required to replace the specified line, or insert the text before the
/// specified line.
/// </summary>
/// <param name="inputFilespec">The file we are reading from.</param>
/// <param name="outputFilespec">The file we are modifying.</param>
/// <param name="lineNumber">Line from the input file that we want to modify</param>
/// <param name="newLineText">Text to replace or insert.</param>
/// <param name="action">Currently only supports replace OR insert.</param>
/// <param name="errorCode">Error to throw if it fails.</param>
/// <returns>True if the action was performed on the file.</returns>
public bool ModifyFile(string inputFilespec, string outputFilespec, int lineNumber,
string newLineText, eAction action, ErrorCodes errorCode)
{
bool rval = false;
if ((action != eAction.insert) && (action != eAction.replace))
return rval;
if ((inputFilespec.Length <= 0) || (lineNumber < 0))
return rval;
try
{
Generic.DeleteFile(outputFilespec);
}
catch
{
string emsg = "Error while deleting file: " + outputFilespec;
LogFile.AddErrorLine(emsg);
throw new LDExceptions(ErrorCodes.FileWrite, emsg);
}
LogFile.AddVerboseLine("StreamReader on <" + inputFilespec + ">");
StreamReader inputStream = new StreamReader(inputFilespec,
System.Text.Encoding.Default, true); // Check for Unicode BOM chars.
int chT = inputStream.Peek(); // force autodetection of encoding.
StreamWriter outputStream = null;
try
{
outputStream = new StreamWriter(outputFilespec, false,
inputStream.CurrentEncoding);
}
catch
{
throw new LDExceptions(errorCode);
}
string newLine;
int lineCount = 0;
while (inputStream.Peek() >= 0)
{
lineCount++;
newLine = inputStream.ReadLine();
if (lineCount == lineNumber) // at the line in question
{
if (action == eAction.replace &&
newLineText.Length > 0)
outputStream.WriteLine(newLineText); // write out the new line
rval = true;
if (action == eAction.insert) // if eAction.insert
{
outputStream.WriteLine(newLineText); // write out the new line
outputStream.WriteLine(newLine); // write out the line just read
}
}
else
outputStream.WriteLine(newLine); // write out the line just read
}
inputStream.Close();
outputStream.Close();
return rval;
}
